Статті в журналах: "E-LOAD SENSING"

1

Shi, Xin Yong, Li Zhong Liu, and Yi Wang Bao. "Shape Effects of Indenter on the Depth-Sensing Indentation." Advanced Materials Research 177 (December 2010): 105–8. http://dx.doi.org/10.4028/www.scientific.net/amr.177.105.

Повний текст джерела

Анотація:

It is revealed that the conventional reduced modulus used in depth-sensing indentation tests is invalid for a flat-ended cylindrical indenter due to the fact that the contact area during the loading is a constant irrelative to load. The load-displacement curve of flat punch is related to the length of the punch and the ratio of the elastic modulus of the indenter to the specimen (the modulus ratio Ei/E). Furthermore, theoretic analysis and finite element simulation demonstrated that, for conical indenter, the measured hardness from depth-sensing indentation tests would increase with increasing modulus ratio because the load increased with the ratio for the same displacement.

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Wang, Yanan, Baicun Hao, Yujia Wang, Yingjie Wei, Xin Huang, and Bi Shi. "Soft while strong mechanical shock tolerable e-skins." Journal of Materials Chemistry A 10, no. 15 (2022): 8186–94. http://dx.doi.org/10.1039/d1ta10746a.

Повний текст джерела

Анотація:

Soft while strong mechanical shock tolerable e-skins relied on non-Newtonian gel embedded within the load-bearing scaffold of conductive collagen fiber sponge spontaneously mimic the protection and sensing functions of natural skin.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Burik, Peter, Ladislav Pešek, and Lukáš Voleský. "Effect of Pile-Up on the Mechanical Characteristics of Steel by Depth Sensing Indentation." Key Engineering Materials 606 (March 2014): 81–84. http://dx.doi.org/10.4028/www.scientific.net/kem.606.81.

Повний текст джерела

Анотація:

Mechanical properties by depth sensing indentation are derived from the indentation load-displacement data used a micromechanical model developed by Oliver & Pharr (O&P). However, O&P analysis on the indentation unloading curve is developed from a purely elastic contact mechanics (sink-in). The applicability of O&P analysis is limited by the materials pile-up. However, when it does, the contact area is larger than that predicted by elastic contact theory (material sinks-in during purely elastic contact), and both hardness H and Youngs modulus E are overestimated, because their evaluation depends on the contact area deduced from the load-displacement data. H can be overestimated by up to 60 % and E by up to 30 % depending on the extent of pile-up [1,2]. It is therefore important to determine the effect of pile-up on obtained mechanical characteristics of the material by depth sensing indentation. The work experimentally analyses the effect of pile-up height on mechanical characteristics H and E, which are determined by O&P analysis. Pile-up height was measured by atomic force microscopy (AFM).

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Sakai, M., and Y. Nakano. "Elastoplastic load–depth hysteresis in pyramidal indentation." Journal of Materials Research 17, no. 8 (August 2002): 2161–73. http://dx.doi.org/10.1557/jmr.2002.0318.

Повний текст джерела

Анотація:

Extensive indentation tests were conducted for nineteen different engineering materials ranging from brittle to ductile materials, and including hard ceramics, ductile metals, and a soft organic polymer. Three tetrahedral pyramid indenters with specific face angles β [shallow pyramid (β = 10°), Vickers (β = 22°), and sharp pyramid (β = 40°) indenters] were used. All the materials tested were subjected to the quadratic load P and penetration depth h relationship P = k1h2 on loading, and most of the tested materials to the quadratic unloading relationship of P = k2(h − hr)2 with the residual depth hr after a complete unload. To determine the contact area at peak indentation load, a specially designed depth-sensing instrument was constructed, on which the contact behavior during loading/unloading was examined by through thickness observation of transparent specimens. All the characteristic indentation parameters were investigated on the basis of simple elastoplastic model, and correlated well with the nondimensional strain E′ tan β/H, in which the elastic modulus E′ was a measure for elasticity, true hardness H was a measure for plasticity, and the inclined face angle β characterized the indenter. The ratio of the conventional Meyer hardness HM to the true hardness H of the materials tested ranged from 0.2 to 0.9 as a function of E′ tan β/H. The cavity model suggested that true hardness H is expressed by the yield stress Y through a constraint factor C as H = C · Y with C ≈ 5.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Lucas, Jessica, and Rebecca M. B. Harris. "Changing Climate Suitability for Dominant Eucalyptus Species May Affect Future Fuel Loads and Flammability in Tasmania." Fire 4, no. 1 (January 7, 2021): 1. http://dx.doi.org/10.3390/fire4010001.

Повний текст джерела

Анотація:

Fire management is becoming increasingly relevant in our changing climate as fire frequency and intensity increases both on a global scale and locally in Tasmania. The distribution of fuel across the landscape has significant impacts on fire regimes, influencing connectivity and flammability of fuel load. Remote sensing techniques are often used to assess current fuel loads, but projections of future fuel distributions are necessary for longer term planning of fire management. Eucalyptus species are an important, dominant component of many Tasmanian forests, influencing fuel load and flammability. We modelled the current and future climate suitability for two Eucalyptus species (E. delegatensis and E. obliqua), using a suite of species distribution models (SDMs) and global climate models (GCMs) for mid (2041–2060) and end of century (2061–2080) time periods. The implications these changes may have for the distribution of these important fuel species in the future are discussed. All GCMs projected notable changes in potential distribution, with both species contracting substantially in some areas and E. obliqua also exhibiting considerable expansions in the west of Tasmania. On average, suitability for E. delegatensis expanded by 5% ± 1.8% (1658 km2), contracted by 67% ± 22.7% (24,591 km2) and remained unchanged in 26% ± 7.8% (8783 km2) by the end of the century. For E. obliqua suitability expanded by a much greater 17% ± 6.3% (24,398 km2), contracted by slightly less at 55% ± 16.8% (81,098 km2) and remained unchanged in 45% ± 16.8% (63,474 km2) by the end of the century. These changes in climate suitability have the potential to cause changes in the composition and structure of Tasmania’s forests, impacting fuel loads. However, the two species exhibited different responses, reflecting their current distributions and suggesting that generalisations regarding species’ responses to changing climates are not appropriate, even where the species are closely related. These results suggest that future fuel loads and flammability at the landscape scale may change, requiring longitudinal, flexible and adaptive future fire management. Assessing the specific effects of distributional changes and the mechanisms driving different responses to climate change are highlighted as further research opportunities.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Zhao, Yi, Huaye Li, Saman Naderiparizi, Aaron Parks, and Joshua R. Smith. "Low-cost wireless power efficiency optimization of the NFC tag through switchable receiver antenna." Wireless Power Transfer 5, no. 2 (April 25, 2018): 87–96. http://dx.doi.org/10.1017/wpt.2018.1.

Повний текст джерела

Анотація:

Near-field communication (NFC) readers, ubiquitously embedded in smartphones and other infrastructures can wirelessly deliver mW-level power to NFC tags. Our previous work NFC-wireless identification and sensing platform (WISP) proves that the generated NFC signal from an NFC enabled phone can power a tag (NFC-WISP) with display and sensing capabilities in addition to identification. However, accurately aligning and placing the NFC tag's antenna to ensure the high power delivery efficiency and communication performance is very challenging for the users. In addition, the performance of the NFC tag is not only range and alignment sensitive but also is a function of its run-time load impedance. This makes the execution of power-hungry tasks on an NFC tag (like the NFC-WISP) very challenging. Therefore, we explore a low-cost tag antenna design to achieve higher power delivered to the load (PDL) by utilizing two different antenna configurations (2-coil/3-coil). The two types of antenna configurations can be used to dynamically adapt to the requirements of varied range, alignment and load impedance in real-time, therefore, we achieve continuous high PDL and reliable communication. With the proposed method, we can, for example, turn a semi-passive NFC-WISP into a passive display tag in which an embedded 2.7″ E-ink screen can be updated robustly by a tapped NFC reader (e.g. an NFC-enable cell-phone) over a 3 seconds and within 1.5cm range.

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Guo, Yixuan, and Gaoyang Liang. "Perceptual Feedback Mechanism Sensor Technology in e-Commerce IoT Application Research." Journal of Sensors 2021 (September 28, 2021): 1–12. http://dx.doi.org/10.1155/2021/3840103.

Повний текст джерела

Анотація:

With the development of sensor technology and the Internet of Things (IoT) technology, the trend of miniaturization of sensors has prompted the inclusion of more sensors in IoT, and the perceptual feedback mechanism among these sensors has become particularly important, thus promoting the development of multiple sensor data fusion technologies. This paper deeply analyzes and summarizes the characteristics of sensory data and the new problems faced by the processing of sensory data under the new trend of IoT, deeply studies the acquisition, storage, and query of sensory data from the sensors of IoT in e-commerce, and proposes a ubiquitous storage method for massive sensory data by combining the sensory feedback mechanism of sensors, which makes full use of the storage resources of IoT storage network elements and maximally meets the massive. In this paper, we propose a ubiquitous storage method for massive sensing data, which makes full use of the storage resources of IoT storage network elements to maximize the storage requirements of massive sensing data and achieve load-balanced data storage. In this paper, starting from the overall development of IoT in recent years, the weak link of intelligent information processing is reinforced based on the sensory feedback mechanism of sensor technology.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Li, Jiaze, Yuan Qiao, Tingting Pan, Ke Zhong, Jiaxing Wen, Shanshan Wu, Fengyu Su, and Yanqing Tian. "Amphiphilic Fluorine-Containing Block Copolymers as Carriers for Hydrophobic PtTFPP for Dissolved Oxygen Sensing, Cell Respiration Monitoring and In Vivo Hypoxia Imaging with High Quantum Efficiency and Long Lifetime." Sensors 18, no. 11 (November 2, 2018): 3752. http://dx.doi.org/10.3390/s18113752.

Повний текст джерела

Анотація:

New amphiphilic star or multi-arm block copolymers with different structures were synthesized for enabling the use of hydrophobic oxygen probe of platinum (II)-tetrakis (pentafluorophenyl) porphyrin (PtTFPP) for bioanalysis. The amphiphilic star polymers were prepared through the Atom Transfer Radical Polymerization (ATRP) method by using hydrophilic 4-arm polyethylene glycol (4-arm-PEG) as an initiator. Among the five block copolymers, P1 series (P1a, P1b, and P1c) and P3 possess fluorine-containing moieties to improve the oxygen sensitivity with its excellent capacity to dissolve and carry oxygen. A polymer P2 without fluorine units was also synthesized for comparison. The structure-property relationship was investigated. Under nitrogen atmosphere, high quantum efficiency of PtTFPP in fluorine-containing micelles could reach to 22% and long lifetime could reach to 76 μs. One kind of representative PtTFPP-containing micelles was used to detect the respiration of Escherichia coli (E. coli) JM109 and macrophage cell J774A.1 by a high throughput plate reader. In vivo hypoxic imaging of tumor-bearing mice was also achieved successfully. This study demonstrated that using well-designed fluoropolymers to load PtTFPP could achieve high oxygen sensing properties, and long lifetime, showing the great capability for further in vivo sensing and imaging.

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Heygster, G., V. Alexandrov, G. Dybkjær, F. Girard-Ardhuin, W. von Hoyningen-Huene, I. L. Katsev, A. Kokhanovsky, et al. "Remote sensing of sea ice: advances during the DAMOCLES project." Cryosphere Discussions 6, no. 1 (January 3, 2012): 37–88. http://dx.doi.org/10.5194/tcd-6-37-2012.

Повний текст джерела

Анотація:

Abstract. In the Arctic, global warming is particularly pronounced so that we need to monitor its development continuously. On the other hand, the vast and hostile conditions make in situ observation difficult, so that available satellite observations should be exploited in the best possible way to extract geophysical information. Here, we give a résumé of the sea ice remote sensing efforts of the EU project DAMOCLES (Developing Arctic Modeling and Observing Capabilities for Long-term Environmental Studies). The monthly variation of the microwave emissivity of first-year and multiyear sea ice has been derived for the frequencies of the microwave imagers like AMSR-E and sounding frequencies of AMSU, and has been used to develop an optimal estimation method to retrieve sea ice and atmospheric parameters simultaneously. A sea ice microwave emissivity model has been used together with a thermodynamic model to establish relations between the emisivities at 6 GHz and 50 GHz. At the latter frequency, the emissivity is needed for assimilation into atmospheric circulation models, but more difficult to observe directly. A method to determine the effective size of the snow grains from observations in the visible range (MODIS) is developed and applied. The bidirectional reflectivity distribution function (BRDF) of snow, which is an essential input parameter to the retrieval, has been measured in situ on Svalbard during the DAMOCLES campaign, and a BRDF model assuming aspherical particles is developed. Sea ice drift and deformation is derived from satellite observations with the scatterometer ASCAT (62.5 km grid spacing), with visible AVHRR observations (20 km), with the synthetic aperture radar sensor ASAR (10 km), and a multi-sensor product (62.5 km) with improved angular resolution (Continuous Maximum Cross Correlation, CMCC method) is presented. CMCC is also used to derive the sea ice deformation, important for formation of sea ice leads (diverging deformation) and pressure ridges (converging). The indirect determination of sea ice thickness from altimeter freeboard data requires knowledge of the ice density and snow load on sea ice. The relation between freeboard and ice thickness is investigated based on the airborne Sever expeditions conducted between 1928 and 1993.

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Sandhya Rani, G., U. Vijaya Laxmi, P. Srividya Devi, and M. Naga Sandhya Rani. "Remote Monitoring and Control for an Isolate Prototype Substation Model." E3S Web of Conferences 309 (2021): 01121. http://dx.doi.org/10.1051/e3sconf/202130901121.

Повний текст джерела

Анотація:

The objective of this paper is to monitor the electrical parameters like voltage, current, etc., remotely and display all the obtained real time values for a substation isolate. This paper is furnished to assure the load and electrical system equipment by the activation of relay, whenever the acquired parameters exceed the predefined values. Generally, this Proposed system design makes use of microcontroller, but the prototype of this circuit modelled in Proteus and can be executed by using ATmega 168 microcontroller. When supply is given to the designed hardware, all the sensors start sensing their respective parameters i. e., voltage, current, temperature etc., and modernize all the values on the display. Comparison between the problem-solving time values and the preordained values is continuously carried out by the microcontroller, if any of these values go beyond the pre-defined values, it sends fault alert to the relay, updates it on the screen and sends the same as an SMS through GSM for the rectification.

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Kim, Gaeul, Chi Cuong Vu, and Jooyong Kim. "Single-Layer Pressure Textile Sensors with Woven Conductive Yarn Circuit." Applied Sciences 10, no. 8 (April 21, 2020): 2877. http://dx.doi.org/10.3390/app10082877.

Повний текст джерела

Анотація:

Today, e-textiles have become a fundamental trend in wearable devices. Fabric pressure sensors, as a part of e-textiles, have also received much interest from many researchers all over the world. However, most of the pressure sensors are made of electronic fibers and composed of many layers, including an intermediate layer for sensing the pressure. This paper proposes the model of a single layer pressure sensor with electrodes and conductive fibers intertwined. The plan dimensions of the fabricated sensors are 14 x 14 mm, and the thickness is 0.4 mm. The whole area of the sensor is the pressure-sensitive point. As expected, results demonstrate an electrical resistance change from 283 Ω at the unload pressure to 158 Ω at the load pressure. Besides, sensors have a fast response time (50 ms) and small hysteresis (5.5%). The hysteresis will increase according to the pressure and loading distance, but the change of sensor loading distance is very small. Moreover, the single-layer pressure sensors also show high durability under many working cycles (20,000 cycles) or washing times (50 times). The single-layer pressure sensor is very thin and more flexible than the multi-layer pressure sensor. The structure of this sensor is also expected to bring great benefits to wearable technology in the future.

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Heygster, G., V. Alexandrov, G. Dybkjær, W. von Hoyningen-Huene, F. Girard-Ardhuin, I. L. Katsev, A. Kokhanovsky, et al. "Remote sensing of sea ice: advances during the DAMOCLES project." Cryosphere 6, no. 6 (December 3, 2012): 1411–34. http://dx.doi.org/10.5194/tc-6-1411-2012.

Повний текст джерела

Анотація:

Abstract. In the Arctic, global warming is particularly pronounced so that we need to monitor its development continuously. On the other hand, the vast and hostile conditions make in situ observation difficult, so that available satellite observations should be exploited in the best possible way to extract geophysical information. Here, we give a résumé of the sea ice remote sensing efforts of the European Union's (EU) project DAMOCLES (Developing Arctic Modeling and Observing Capabilities for Long-term Environmental Studies). In order to better understand the seasonal variation of the microwave emission of sea ice observed from space, the monthly variations of the microwave emissivity of first-year and multi-year sea ice have been derived for the frequencies of the microwave imagers like AMSR-E (Advanced Microwave Scanning Radiometer on EOS) and sounding frequencies of AMSU (Advanced Microwave Sounding Unit), and have been used to develop an optimal estimation method to retrieve sea ice and atmospheric parameters simultaneously. In addition, a sea ice microwave emissivity model has been used together with a thermodynamic model to establish relations between the emissivities from 6 GHz to 50 GHz. At the latter frequency, the emissivity is needed for assimilation into atmospheric circulation models, but is more difficult to observe directly. The size of the snow grains on top of the sea ice influences both its albedo and the microwave emission. A method to determine the effective size of the snow grains from observations in the visible range (MODIS) is developed and demonstrated in an application on the Ross ice shelf. The bidirectional reflectivity distribution function (BRDF) of snow, which is an essential input parameter to the retrieval, has been measured in situ on Svalbard during the DAMOCLES campaign, and a BRDF model assuming aspherical particles is developed. Sea ice drift and deformation is derived from satellite observations with the scatterometer ASCAT (62.5 km grid spacing), with visible AVHRR observations (20 km), with the synthetic aperture radar sensor ASAR (10 km), and a multi-sensor product (62.5 km) with improved angular resolution (Continuous Maximum Cross Correlation, CMCC method) is presented. CMCC is also used to derive the sea ice deformation, important for formation of sea ice leads (diverging deformation) and pressure ridges (converging). The indirect determination of sea ice thickness from altimeter freeboard data requires knowledge of the ice density and snow load on sea ice. The relation between freeboard and ice thickness is investigated based on the airborne Sever expeditions conducted between 1928 and 1993.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Farooq, Aqeel, Mehdi Seyedmahmoudian, Ben Horan, Saad Mekhilef, and Alex Stojcevski. "Overview and Exploitation of Haptic Tele-Weight Device in Virtual Shopping Stores." Sustainability 13, no. 13 (June 29, 2021): 7253. http://dx.doi.org/10.3390/su13137253.

Повний текст джерела

Анотація:

In view of the problem of e-commerce scams and the absence of haptic interaction, this research aims to introduce and create a tele-weight device for e-commerce shopping in smart cities. The objective is to use the proposed prototype to provide a brief overview of the possible technological advancements. When the tele-weight device is affixed over the head-mounted display, it allows the user to feel the item’s weight while shopping in the virtual store. Addressing the problem of having no physical interaction between the user (player) and a series game scene in virtual reality (VR) headsets, this research approach focuses on creating a prototype device that has two parts, a sending part and a receiving part. The sending part measures the weight of the object and transmits it over the cellular network to the receiver side. The virtual store user at the receiving side can thus realize the weight of the ordered object. The findings from this work include a visual display of the item’s weight to the virtual store e-commerce user. By introducing sustainability, this haptic technology-assisted technique can help the customer realize the weight of an object and thus have a better immersive experience. In the device, the load cell measures the weight of the object and amplifies it using the HX711 amplifier. However, some delay in the demonstration of the weight was observed during experimentation, and this indirectly altered the performance of the system. One set of the device is sited at the virtual store user premises while the sending end of the device is positioned at the warehouse. The sending end hardware includes an Arduino Uno device, an HX711 amplifier chip to amplify the weight from the load cell, and a cellular module (Sim900A chip-based) to transmit the weight in the form of an encoded message. The receiving end hardware includes a cellular module and an actuator involving a motor gear arrangement to demonstrate the weight of the object. Combining the fields of e-commerce, embedded systems, VR, and haptic sensing, this research can help create a more secure marketplace to attain a higher level of customer satisfaction.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Pipitone, E., and L. D'Acquisto. "Development of a low-cost piezo film-based knock sensor." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 217, no. 8 (August 1, 2003): 691–99. http://dx.doi.org/10.1243/09544070360692087.

Повний текст джерела

Анотація:

It is well known that spark advance is a key parameter in spark ignition engine management. Increasing fuel cost and emission regulation strictness require a higher engine efficiency, which can be improved by an accurate regulation of the spark advance. Under high load conditions, an optimal spark advance choice leads the engine to run next to the knock limit, so the management and control system needs to be equipped with a knock sensor in order to preserve the engine from damage. The authors developed a low-cost knock sensor whose sensing element is a thin washer of polyvinylidine fluoride (PVDF), a fluoropolymer characterized by a great piezoelectric e ect if polarized. The sensor has been tested on a spark ignition CFR engine (the standard single-cylinder test engine used by ASTM for octane number determination of spark ignition engine fuel) and compared with a commercial accelerometer and a pressure sensor, in terms of knocking detection capability, measured knock intensity (KI) and signal-to-noise ratio (SNR). Knocking tests have also been carried out on a Renault series production engine. The collected data show that PVDF ensures a reliable detection of knock, a precise measurement of knock energy and accurate information about the frequency content of the perceived vibration. The sensor worked for several hours without depolarizing and, above all, owing to the great piezoelectric e ect of PVDF, the use of a charge amplifier was unnecessary. PVDF proved to have great potential as a knock detector in spark ignition engines at a very low cost.

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Pereira, Augusto Gabriel da Costa, Lucas Rangel Coringa Barros, Valeria Taakondjo Nakale, Tamires Fernandes Oliveira, Igor Antonio Kuhnen, Anísio Alfredo da Silva Junior, Danielle Christine Stenner Nassarden, Glauber Guimarães Cirino, and Rafael Da Silva Palácios. "Aplicação dos produtos MODIS Coleção 6 na análise da Profundidade Ótica do Aerossol sobre regiões de Floresta e Cerrado na Amazonia Legal." Revista Brasileira de Geografia Física 15, no. 2 (April 21, 2022): 886. http://dx.doi.org/10.26848/rbgf.v15.2.p886-912.

Повний текст джерела

Анотація:

As estimativas de sensoriamento remoto por meio dos espectrômetros de resolução moderada como o MODIS (Moderate Resolution Imaging Spectroradiometer) têm mostrado capacidade de fornecer importantes informações globais e regionais das propriedades óticas dos aerossóis atmosféricos. O monitoramento dessas informações, tais como a profundidade ótica do aerossol (AOD), pode auxiliar o entendimento do efeito dessas partículas sobre o clima. Nesse sentido o objetivo desse estudo foi aplicar os produtos da coleção 6 do MODIS na análise da AOD sobre regiões de Floresta e Cerrado na Amazonia Legal. Esse trabalho tem como hipótese principal que diferentes produtos MODIS podem explicar as variações temporais e espaciais da AOD sobre sites da Amazonia. Estimativas dos produtos MODIS de resoluções espaciais de 3km (3k) e 10 km (10k) foram comparadas e analisadas de 2002 a 2017 para os sites de Alta Floresta e Cuiabá. Em comparação com medidas de referência da AERONET, as estimativas totais dos produtos MODIS 3k e 10k subestimaram a AOD em torno de 13% em Alta Floresta e 22% em Cuiabá. A comparação entre os sites mostrou que as estimativas de AOD para ambos produtos são mais elevadas sobre o site de Alta Floresta, em torno de 50% para o produto 3k e 40% para o 10k. Esse estudo quantificou as médias sazonais para ambos produtos nos sites de Alta Floresta e Cuiabá evidenciando as principais diferenças entre os sites. Foi verificado que durantes a estação chuvosa os valores de AOD são similares entre os sites e durante a estação seca o site de Alta Floresta é mais impactado pela alta carga de aerossóis emitidos pelas queimas regionais.Palavras-chave: Aerossol, sensoriamento remoto, satélite Terra, satélite Aqua, MOD04_L2. Application of the Collection 6 MODIS products in the analysis of the Aerosol Optical Depth over Forest and Cerrado regions in the Legal Amazon A B S T R A C TEstimates from remote sensing done by using moderate resolution spectrometers such as the MODIS (Moderate Resolution Imaging Spectroradiometer) have shown the ability to provide important global and regional information on the optical properties of atmospheric aerosols. Monitoring information such as the aerosol optical depth (AOD), can help to understand the effect of these particles on the climate. In this sense, the objective of this study was to apply the collection 6 of the MODIS products in the analysis of the AOD on the Forest and Cerrado regions in the Legal Amazon. This work has the main hypothesis that different MODIS products can explain the temporal and spatial variations of AOD over Amazon sites. Estimates of the MODIS products for the 3km (3k) and 10 km (10k) spatial resolutions were compared and analyzed from 2002 to 2017 for both sites. In comparison to AERONET benchmark measurements, the total estimates for MODIS 3k and 10k products underestimated AOD by around 13% in Alta Floresta and 22% in Cuiabá. The comparison between the sites showed that the AOD estimates for both products are higher over the Alta Floresta site, with around 50% for the 3k product and 40% for the 10k product. The seasonal averages for both products analyzed at the Alta Floresta and Cuiabá sites were quantified, and the main differences between them were highlighted. It was verified that during the rainy season the AOD values are similar between the sites, and during the dry season, the Alta Floresta site is more impacted by the high aerosol load emitted by regional fires.Keywords: Aerosol, remote sensing, Terra satellite, Aqua satellite, MOD04_L2.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Gomes, Érico Rodrigues, and Inessa Racine Gomes de Araújo. "Análise multitemporal da linha de costa da praia de Macapá no litoral do Piauí a partir de imagens Landsat / Multitemporal analysis of the coastline of Macapá beach on the coast of Piauí from Landsat images." Caderno de Geografia 27, no. 1 (November 23, 2017): 189. http://dx.doi.org/10.5752/p.2318-2962.2017v27nesp1p189.

Повний текст джерела

Анотація:

A planície costeira do estado do Piauí tem passado por diversas intervenções em função das atividades naturais e humanas. A zona costeira representa uma unidade de paisagem que mesmo sem apresentar grande ocupação já apresenta indicativos ambientais no que se refere a erosão costeira. A metodologia foi baseada em uma análise de séries temporais de 30 anos (1985 a 2015) através de imagens Landsat para a detecção e variação da linha de costa. Os resultados obtidos indicam que há uma tendência generalizada no processo de avanço das águas oceânicas sobre a linha da costa na praia de Macapá e que está relacionado com a dinâmica costeira e também com o fato de que neste local há intensa carga de sedimentos oriundos do continente, através do trabalho de deposição e transporte dos rios Cardoso e Camurupim, que deságuam no oceano em forma de estuário.Palavras–chave: erosão costeira, monitoramento costeiro, linha de costa, sensoriamento remoto.Abstract The coastal plain of the state of Piauí has undergone several interventions due to natural and human activities. The coastal zone represents a landscape unit that even without presenting great occupation already presents environmental indicatives with respect to coastal erosion. he methodology was based on a 30-year time series analysis (1985 to 2015) using Landsat images for the detection and variation of the coastline. The results indicate that there is a general tendency in the process of advancing the oceanic waters on the coastline in the beach of Macapá and that is related to the coastal dynamics and also to the fact that in this place there is an intense load of sediments originating from the continent, through the work of deposition and transportation of the rivers Cardoso and Camurupim, that fall into the ocean in the form of estuary.Keywords: coastal erosion, coastal monitoring, coast line, remote sensing.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Sidibe, Alassane, Alexandru Takacs, Gaël Loubet, and Daniela Dragomirescu. "Compact Antenna in 3D Configuration for Rectenna Wireless Power Transmission Applications." Sensors 21, no. 9 (May 4, 2021): 3193. http://dx.doi.org/10.3390/s21093193.

Повний текст джерела

Анотація:

This work presents methods for miniaturizing and characterizing a modified dipole antenna dedicated to the implementation of wireless power transmission systems. The antenna size should respect the planar dimensions of 60 mm × 30 mm to be integrated with small IoT devices such as a Bluetooth Lower Energy Sensing Node. The provided design is based on a folded short-circuited dipole antenna, also named a T-match antenna. Faced with the difficulty of reducing the physical dimensions of the antenna, we propose a 3D configuration by adding vertical metallic arms on the edges of the antenna. The adopted 3D design has an overall size of 56 mm × 32 mm × 10 mm at 868 MHz. Three antenna-feeding techniques were evaluated to characterize this antenna. They consist of soldering a U.FL connector on the input port; vertically connecting a tapered balun to the antenna; and integrating a microstrip transition to the layer of the antenna. The experimental results of the selected feeding techniques show good agreements and the antenna has a maximum gain of +1.54 dBi in the elevation plane (E-plane). In addition, a final modification was operated to the designed antenna to have a more compact structure with a size of 40 mm × 30 mm × 10 mm at 868 MHz. Such modification reduces the radiation surface of the antenna and so the antenna gain and bandwidth. This antenna can achieve a maximum gain of +1.1 dBi in the E-plane. The two antennas proposed in this paper were then associated with a rectifier to perform energy harvesting for powering Bluetooth Low Energy wireless sensors. The measured RF-DC (radiofrequency to direct current) conversion efficiency is 73.88% (first design) and 60.21% (second design) with an illuminating power density of 3.1 µW/cm2 at 868 MHz with a 10 kΩ load resistor.

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Berline, Léo, Andrea Michelangelo Doglioli, Anne Petrenko, Stéphanie Barrillon, Boris Espinasse, Frederic A. C. Le Moigne, François Simon-Bot, Melilotus Thyssen, and François Carlotti. "Long-distance particle transport to the central Ionian Sea." Biogeosciences 18, no. 24 (December 14, 2021): 6377–92. http://dx.doi.org/10.5194/bg-18-6377-2021.

Повний текст джерела

Анотація:

Abstract. Together with T–S properties, particle abundance in situ measurements are useful to discriminate water masses and derive circulation patterns. In the upper layers of the Ionian Sea, the fresher Atlantic Waters (AW) recently crossing the Sicily Channel meet the resident and saltier AW, which circulated cyclonically in the eastern basin and modified after evaporation and eventually cooling. In May 2017, during the PEACETIME cruise, fluorescence and particle abundance sampled at high resolution revealed unexpected heterogeneity in the central Ionian Sea. Surface salinity measurements, together with altimetry-derived and hull-mounted acoustic Doppler current profiler (ADCP) currents, describe a zonal pathway of AW entering the Ionian Sea, consistent with the so-called cyclonic mode in the North Ionian Gyre. The ION-Tr transect, located between 19–20∘ E at approximately 36∘ N, turned out to be at the crossroads of three water masses, mostly coming from the west, north and an isolated anticyclonic eddy northeast of ION-Tr. Using Lagrangian numerical simulations, we suggest that the contrast in particle loads along ION-Tr originates from particles transported from these three different water masses. Waters from the west, identified as AW carried by a strong southwestward jet, were moderate in particle load, probably originating from the Sicily Channel. The water mass from the north, carrying abundant particles, probably originated in the northern Ionian Sea, or further away from the south Adriatic Sea. Waters from the eddy, depleted in particles and chl a, may originate from south of the Peloponnese, where the Pelops eddy forms. The central Ionian Sea hence appears as a mosaic area, where waters of contrasted biological history meet. This contrast is particularly clear in spring, when blooming and non-blooming areas co-occur. Interpreting the complex dynamics of physical–biogeochemical coupling from discrete measurements made at isolated stations at sea is a challenge. The combination of multiparametric in situ measurements at high resolution with remote sensing and Lagrangian modeling appears as one adequate way to address this challenge.

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Rodrigues, Suzan Walesca Pequeno, and Pedro Walfir M. Souza Filho. "MAPPING OF ENVIRONMENTAL SENSITIVITY INDEX TO OIL SPILL FROM LANDSAT TM IMAGES: “A STUDY CASE ON THE AMAZON COASTAL PLAIN”." Revista Brasileira de Geofísica 30, no. 4 (December 1, 2012): 533. http://dx.doi.org/10.22564/rbgf.v30i4.240.

Повний текст джерела

Анотація:

O índice de sensibilidade ambiental (ISA) é representado por números que variam de 1 a 10, especificando a escala de impacto causado pelo óleo, quantomaior for o seu valor, maior é o índice de sensibilidade. O derramamento de óleo já não é mais um fato isolado e esporádico no mundo, causando inúmeros impactosambientais, portanto, a produção de mapas que representam o ISA tornou-se importante para a implementação de planos de contingência e de emergência. O municípiode Curuçá, região nordeste do estado do Pará, não possui um mapa de semi-detalhe, assim, este trabalho teve como objetivo a construção de um mapa tático na escalade 1:100.000 e o reconhecimento dos ambientes costeiros através do processamento de imagens Landsat e do levantamento de campo contribuindo para a identificaçãodas áreas que mais sofrerão com um eventual derramamento de óleo. Deste modo foi possível classificar oito índices: ISA 1B muro de arrimo, ISA 1C falésias, ISA 3Apraias de areia fina e dunas expostas, ISA 7 planície de maré arenosa, ISA 9 delta de maré vazante, ISA 10A pântano salino; ISA 10B pântano de água doce e ISA 10Cmanguezal. Assim, os ISA’s são produtos que representados em mapa podem ajudar na tomada decisões na prevenção e no controle de acidentes durante as atividadesde produção e no transporte do óleo usado pelas companhias produtoras, tornando-se uma boa estratégia de prevenção, a qual pode evitar os altos custos das operaçõesde limpeza e recuperação de ambientes impactados no caso de derramamentos de óleo e cargas de risco. ABSTRACT: The environmental sensitivity index (ESI) is represented by a scale ranging from 1 to 10, where the intensity of the impact caused by the oil spill isspecified and, the higher the value the higher the sensitivity index. Oil spills impact the environment and are not exclusive to certain regions of the world. Therefore, theproduction of maps representing the ESI has become important for the implementation of contingency and emergency plans. Curuçá city, located in northeastern Parástate, does not have a map of semi-detailed environmental sensitivity, for that reason, this study aimed to generate a tactical map, scale of 1:100,000, with recognitionof coastal environments identified by digital processing of Landsat images and field surveys. The map will help identify the areas more prone to suffer from a possibleoil spill. Thus, eight indices were classified as follows: ESI 1B retaining wall, ESI 1C cliffs, ESI 3A sandy beaches and exposed dunes, ESI 7 sandy tidal flat, ESI 9 ebbtide delta, ESI 10A salt marsh, ESI 10B freshwater marsh and ESI 10 mangrove. Finally, the ESI represented in these maps can support the decision making process toprevent and control accidents that may happen during oil production and transportation. Benefits may reflect on lower costs of cleaning and restoration of the impactedareas in case of oil and other potentially harmful load spills.Keywords: environmental sensitivity index; remote sensing; coastal environment

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Chawla, Prince, Agnieszka Najda, Aarti Bains, Renata Nurzyńska-Wierdak, Ravinder Kaushik, and Mansuri M. Tosif. "Potential of Gum Arabic Functionalized Iron Hydroxide Nanoparticles Embedded Cellulose Paper for Packaging of Paneer." Nanomaterials 11, no. 5 (May 15, 2021): 1308. http://dx.doi.org/10.3390/nano11051308.

Повний текст джерела

Анотація:

Recently, the interest of scientists has turned towards eco-friendly metal nanoparticles due to their distinctive physicochemical properties that have been used in several biochemical and food applications, including drug and bioactive component delivery, sensing of food pathogenic bacteria, imaging techniques, and theranostics. Therefore, this study aimed to fabricate gum arabic stabilized iron hydroxide nanoparticles (IHNPs) using the co-precipitation process and to develop nanoparticles decorated antimicrobial cellulose paper. The agglomeration of IHNPs is a major concern, therefore, the varied concentration (0.25–2.0%) of gum arabic was used to functionalize and stabilize the nanoparticles, and based on UV-visible spectroscopy and particle size analysis, 1% gum arabic concentration was screened out. Scanning electron microscopy displayed polygonal disc shapes of IHNPs that had sides of approximately equal lengths. Energy dispersive spectroscopy was used to determine the purity of the IHNPs and results illustrated the elemental iron peak at 0.8 keV and 6.34 keV. For thermal stability, differential scanning calorimetry (DSC) was employed, and the glass transition temperature was observed at 138.50 °C with 138.31 °C onset and 147.14 °C endset temperature, respectively. Functionalized IHNPs showed a significantly (p < 0.05) higher zone of inhibition against S. aureus (29.63 mm) than that of E. coli and were found to be non-toxic to Caco-2 cells during cell viability assay. Time-kill kinetics showed that cellulose paper embedded with nanoparticles possessed excellent antibacterial activity against S. aureus. To explore the food application of developed cellulose paper, citric acid coagulated dairy product (Paneer), similar to cottage cheese was formulated, and it was evaluated for its microbial shelf life. The unwrapped sample showed higher microbial load during the fourth day of the storage. However, both wrapped samples were acceptable till the 10th of storage.

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Landini, N., M. Orlandi, M. Occhipinti, C. Nardi, L. Tofani, S. Bellando-Randone, C. Bruni, M. Matucci-Cerinic, G. Morana, and S. Colagrande. "POS0264 THE EMERGING ROLE OF MAGNETIC RESONANCE IMAGING IN INTERSTITIAL LUNG DISEASE IN SYSTEMIC SCLEROSIS: EVIDENCE FOR ULTRA SHORT TE AND COMPRESSED SENSING VIBE ACQUISITIONS AS PROMISING TOOLS FOR THE EVALUATION OF PARENCHYMAL ALTERATIONS." Annals of the Rheumatic Diseases 80, Suppl 1 (May 19, 2021): 355.1–355. http://dx.doi.org/10.1136/annrheumdis-2021-eular.3253.

Повний текст джерела

Анотація:

Background:Interstitial lung disease (ILD) is a frequent complication and the major cause of death in Systemic sclerosis (SSc). Computed tomography (CT) is the gold standard imaging technique to assess ILD but is burdened by exposure to ionizing radiations that limits its use for the follow-up. MRI sequences with Ultra Short Echo Time (UTE) are promising for ILD.Objectives:We tested two MRI sequences, UTE Spiral VIBE and Compressing Sensing (CS) VIBE, in SSc-ILD, in comparison to chest CT.Methods:SSc patients with suspected-ascertained ILD were evaluated for undergoing CT-MRI examinations in the same day. Two radiologists visually scored the extent of ground glass opacities (GGO), reticulations, honeycombing and consolidations on CT-MRI. The sum of alteration was assumed as ILD extent. A quantitative texture analysis (qCT) was also performed on CT. Cohen’s k was adopted for interreader concordance in ILD detection. MRI sensitivity and specificity in ILD detection were evaluated. Lin’s concordance was adopted to compare extent analysis between readers and between CT (visual and qCT analysis) and MRI sequences.Results:54 patients performed both CT and MRI. MRI interreader concordance was moderate in ILD detection, while ILD and GGO extent analysis showed good or very good concordance. UTE Spiral VIBE had a sensitivity and specificity in ILD detection of 95.8% and 77.8%, while alterations extent analysis obtained a very good concordance with CT for ILD and GGO. CS VIBE showed a sensitivity and specificity in ILD detection of 46.7% and 95.0%, but a slight or fair concordance with CT in all alterations’ extent analysis.Conclusion:MRI UTE Spiral VIBE sequences are helpful in the evaluation of SSc-ILD. Larger cohorts of patients will be needed to confirm that MRI may be useful in clinical practice, reducing the radiological load of chest CTReferences:[1]Romei C, Turturici L, Tavanti L, et al. The use of chest magnetic resonance imaging in interstitial lung disease: a systematic review. Eur Respir Rev. 2018;27(150):180062. Doi:10.1183/16000617.0062-2018[2]Miller GW, Mugler JP, Sá RC, Altes TA, Prisk GK, Hopkins SR. Advances in functional and structural imaging of the human lung using proton MRI. NMR Biomed. 2014;27(12):1542-1556. doi:10.1002/nbm.3156[3]Pinal-Fernandez I, Pineda-Sanchez V, Pallisa-Nuñez E, et al. Fast 1.5 T chest MRI for the assessment of interstitial lung disease extent secondary to systemic sclerosis. Clin Rheumatol. 2016;35(9):2339-2345. doi:10.1007/s10067-016-3267-0[4]Ohno Y, Koyama H, Yoshikawa T, et al. Pulmonary high-resolution ultrashort TE MR imaging: Comparison with thin-section standard- and low-dose computed tomography for the assessment of pulmonary parenchyma diseases: Pulmonary MRI with UTE in Pulmonary Disease. J Magn Reson Imaging. 2016;43(2):512-532. doi:10.1002/jmri.25008Disclosure of Interests:None declared

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Shin, Gee Won, Kyung-Jun Lee, Donggun Park, Joong Hee Lee, and Myung Hwan Yun. "Personal Mobility Device and User Experience: A State-of-the-art Literature Review." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 62, no. 1 (September 2018): 1336–37. http://dx.doi.org/10.1177/1541931218621305.

Повний текст джерела

Анотація:

Background Personal Mobility Device (PMD) refers to ‘Smart Mobility’ or ‘Micro Mobility’ for one or two persons, and it is appreciated as an environmental-friendly means operated by electric resources (Burns, 2013). According to Transparency Market Research in 2016, the world’s personal transport market is expected to grow two times bigger from 2014 to 2023. In fact, PMD has various product types, competence levels and safety problems, so it cannot help covering many user experiences (UXs). Thus, this study aimed to analyze previous researches about PMD in terms of UX and usability. Method In this study, 160 papers were collected through five search engines with keyword combinations of UX (e.g., user interaction and interface) and PMD (e.g., Segway and electric vehicle). Through two filtering processes, the 19 papers were finally selected, and each was analyzed by the next six criteria; device types, research environments, participants, user experience factors, UX evaluation methodologies, and UX measurement. Results The results showed that Segway was the most common device type rather than electric vehicles, powered wheelchair, proposed product, E-scooter, E-bicycle, and E-bike. In addition, the outdoor environment accounted for the biggest percentage of researches beyond indoor, semi-outdoor, and online survey. People who participated in researches were usually expert and novice, who got used to handle the assigned PMD for each paper. A total of 26 UX factors (e.g., effectiveness, safety, usability, and acceptability) was collected and classified considering each experimental context; safety and usability turned out to be the most two important factors. From the UX methodological view, the PMD were usually evaluated by a questionnaire rather than by objective methods, which enable the participant to give more instinctive reactions and the researchers to gather quantitative data easily. In this way, UX objective measurements on previous researches were categorized into body observation (e.g., body angle on device), usage behavior (e.g., running distance) and compatibility on field (e.g., riding against traffic). Discussion & Conclusion The collected 28 UX factors were classified by a methodology whether it was objective or subjective measure, and it was called the UX factors framework for PMD in this study. First of all, the four main UX factors were determined: usability, satisfaction, acceptability and safety. The rest of 24 UX factors belonged to the corresponding main UX factors. For example, usability included compatibility (objectively measured factors; OMF), effectiveness, device performance, efficiency, and physical load (subjectively measured factors; SMF). Satisfaction included intuitive, customer-services-quality, charging, operability, comfort, predictability, mobility, and maintainability (SMF). Acceptability included compatibility (OMF), aesthetics, device learnability, cost, and training (SMF). Safety included stability, risk behavior (OMF), independency, guard, controllability, security, and testability (SMF). These results implied that most UX factors for PMD were usually measured subjectively rather than objectively. In particular, satisfaction had not been measured objectively even though it plays a significant role in UX factors with usability, acceptability, and safety. In other areas, some researches used objective measurements such as heart rate, EEG, or action log for sensing satisfaction (Gao, 2012; Taylor, 2015), so it is also possible to measure PMD satisfaction using objective methods. In this study, the previous researches about UX and PMD were analyzed to identify the trend of the UX research of PMD. A total of 19 papers were collected and classified by device type, research environment, participants, UX factors, evaluation method, and objective measurements. As a result, it was found that various UX factors were introduced, and the systematized UX factors framework was proposed. Through this UX framework, we expect to apply more objective measurements on UX factors of PMD in future researches.

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Buliya, Asha, K. C. Pancholi, R. K. Paliwal, and S. P. Bhatnagar. "Dielectric Properties of Clay Loam Soil at Lower Microwave Frequencies." Solid State Phenomena 209 (November 2013): 229–32. http://dx.doi.org/10.4028/www.scientific.net/ssp.209.229.

Повний текст джерела

Анотація:

Real and Imaginary parts ( ) of the Complex Dielectric Permittivity (ε*) of Clay Loam soil collected from Nanta Farm, CAD, Kota, Rajasthan have been measured using a Vector Network Analyzer with varied Moisture contents and Salinity levels in the frequency range 150 MHz to 2.2 GHz. Both and are observed to be strongly dependent on moisture content. The Reflection coefficient(R) , Emissivity(e) and Brightness temperature(T_B) of Microwaves for the soil sample were also calculated from the measured permittivity data. These parameters have their own importance in remote sensing of soil moisture using Microwave signals and show expected variations with soil salinity and Microwave frequencies used.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

O’Ketch, Marvin, Spencer Williams, Cameron Larson, Jennifer L. Uhrlaub, Rachel Wong, Brenna Hall, Neha R. Deshpande, and Dominik Schenten. "MAVS regulates the quality of the antibody response to West-Nile Virus." PLOS Pathogens 16, no. 10 (October 26, 2020): e1009009. http://dx.doi.org/10.1371/journal.ppat.1009009.

Повний текст джерела

Анотація:

A key difference that distinguishes viral infections from protein immunizations is the recognition of viral nucleic acids by cytosolic pattern recognition receptors (PRRs). Insights into the functions of cytosolic PRRs such as the RNA-sensing Rig-I-like receptors (RLRs) in the instruction of adaptive immunity are therefore critical to understand protective immunity to infections. West Nile virus (WNV) infection of mice deficent of RLR-signaling adaptor MAVS results in a defective adaptive immune response. While this finding suggests a role for RLRs in the instruction of adaptive immunity to WNV, it is difficult to interpret due to the high WNV viremia, associated exessive antigen loads, and pathology in the absence of a MAVS-dependent innate immune response. To overcome these limitations, we have infected MAVS-deficient (MAVSKO) mice with a single-round-of-infection mutant of West Nile virus. We show that MAVSKO mice failed to produce an effective neutralizing antibody response to WNV despite normal antibody titers against the viral WNV-E protein. This defect occurred independently of antigen loads or overt pathology. The specificity of the antibody response in infected MAVSKO mice remained unchanged and was still dominated by antibodies that bound the neutralizing lateral ridge (LR) epitope in the DIII domain of WNV-E. Instead, MAVSKO mice produced IgM antibodies, the dominant isotype controlling primary WNV infection, with lower affinity for the DIII domain. Our findings suggest that RLR-dependent signals are important for the quality of the humoral immune response to WNV.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Sudarmaji, Arief, and Akio Kitagawa. "Application of Temperature Modulation-SDP on MOS Gas Sensors: Capturing Soil Gaseous Profile for Discrimination of Soil under Different Nutrient Addition." Journal of Sensors 2016 (2016): 1–11. http://dx.doi.org/10.1155/2016/1035902.

Повний текст джерела

Анотація:

A technique of temperature modulation-SDP (specified detection point) on MOS gas sensors was designed and tested on their sensing performance to such complex mixture, soil gaseous compound. And a self-made e-nose was built to capture and analyze the gaseous profile from sampling headspace of two soils (sandy loam and sand) with the addition of nutrient at different dose (without, normal, and high addition). It comprises (a) 6 MOS gas sensors which were driven wirelessly on a certain modulation through (b) a PSoC CY8C28445-24PVXI-based interface and (c) the Principal Component Analysis (PCA) and neural network (NN) as pattern recognition tools. The gaseous compounds are accumulated in a static headspace with thermostatting and stirring under controlled condition to optimize equilibration and gases concentration as well. The patterns are trained by backpropagation algorithm which employs a log-sigmoid function and updates the weights using search-then-converge schedule. PCA results indicate that the sensor array used is able to differentiate the soil type clearly and may provide a discrimination as a response to presence/level of the nutrients addition in soil. Additionally, the PCA enhances the classification performance of NN to discriminate among the predescribed nutrient additions.

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Wang, Dongxiang, Dominika Szczepanik, and Iwona S. Stachlewska. "Interrelations between surface, boundary layer, and columnar aerosol properties derived in summer and early autumn over a continental urban site in Warsaw, Poland." Atmospheric Chemistry and Physics 19, no. 20 (October 23, 2019): 13097–128. http://dx.doi.org/10.5194/acp-19-13097-2019.

Повний текст джерела

Анотація:

Abstract. PollyXT Raman polarization lidar observations were performed at the Remote Sensing Laboratory (RS-Lab) in Warsaw (52.2109∘ N, 20.9826∘ E), Poland, in the framework of the European Aerosol Research Lidar Network (EARLINET) and the Aerosol, Clouds, and Trace gases Research Infrastructure (ACTRIS) projects. Data collected in July, August, and September of 2013, 2015, and 2016 were analysed using the classical Raman approach. In total, 246 sets of intact profiles, each set comprising particle extinction (α) and backscatter coefficients (β) as well as linear particle depolarization ratios (δ) at 355 nm and 532 nm, were derived for statistical investigations and stored in the EARLINET/ACTRIS database. The main analysis was focused on intensive optical properties obtained within the atmospheric boundary layer (ABL). Their interrelations were discussed for different periods: the entire day; nighttime, with respect to the nocturnal boundary layer (NL) and the residual boundary layer (RL); at sunrise, with respect to the morning transition boundary layer (MTL); and from late afternoon until sunset, with respect to the well-mixed boundary layer (WML). Within the boundary layer, the lidar-derived optical properties (entire day, 246 sets) revealed a mean aerosol optical depth (AODABL) of 0.20±0.10 at 355 nm and 0.11±0.06 at 532 nm; a mean Ångström exponent (ÅEABL) of 1.54±0.37; a mean lidar ratio (LRABL) of 48±17 sr at 355 nm and 41±15 sr at 532 nm; a mean linear particle depolarization ratio (δABL) of 0.02±0.01 at 355 nm and 0.05±0.01 at 532 nm; and a mean water vapour mixing ratio (WVABL) of 8.28±2.46 g kg−1. In addition, the lidar-derived daytime boundary layer optical properties (for the MTL and WML) were compared with the corresponding daytime columnar aerosol properties derived from the multi-filter rotating shadowband radiometer (MFR-7) measuring within the National Aerosol Research Network (PolandAOD-NET) and the CE318 sun photometer of the Aerosol Robotic NETwork (AERONET). A high linear correlation of the columnar aerosol optical depth values from the two latter instruments was obtained in Warsaw (a correlation coefficient of 0.98 with a standard deviation of 0.02). The contribution of the aerosol load in the summer and early-autumn free troposphere can result in an AODCL value that is twice as high as the AODABL over Warsaw. The occurrence of a turbulence-driven aerosol burst from the boundary layer into the free troposphere can further increase this difference. Aerosol within the ABL and in the free troposphere was interpreted based on comparisons of the properties derived at different altitudes with values reported in the literature, which were characteristic for different aerosol types, in combination with backward trajectory calculations, satellite data, and model outputs. Within the boundary layer, the aerosol consisted of either urban anthropogenic pollution (∼ 61 %) or mixtures of anthropogenic aerosol with biomass-burning aerosol (< 14 %), local pollen (< 7 %), or Arctic marine particles (< 5 %). No significant contribution of mineral dust was found in the boundary layer. The lidar-derived atmospheric boundary layer height (ABLH) and the AODABL exhibited a positive correlation (R of 0.76), associated with the local anthropogenic pollution (most pronounced for the RL and WML). A positive correlation of the AODABL and LRABL and a negative correlation of the ÅEABL and LRABL, as well as the expected negative trends for the WVABL (and surface relative humidity, RH) and δABL, were observed. Relations of the lidar-derived aerosol properties within the ABL and the surface in situ measurements of particulate matter with an aerodynamic diameter less than 10 µm (PM10) and less than 2.5 µm (PM2.5) measured by the Warsaw Regional Inspectorate for Environmental Protection (WIOS) network, and the fine-to-coarse mass ratio (FCMR) were investigated. The FCMR and surface RH showed a positive correlation even at nighttime (R of 0.71 for the MTL, 0.63 for the WML, and 0.6 for the NL), which generally lacked statistically significant relations. A weak negative correlation of the FCMR and δABL (more pronounced at 532 nm at nighttime) and no casual relation between the FCMR and ÅEABL were found. Most interestingly, distinct differences were observed for the morning transition layer (MTL) and the well-mixed layer (WML). The MTL ranged up to 0.6–1 km, and was characterized by a lower AODABL(<0.12), wetter conditions (RH 50–80 %), smaller particles (ÅEABL of 1–2.2; FCMR from 0.5 to 3), and a low LRABL of between 20 and 40 sr. The WML ranged up to 1–2.5 km and exhibited a higher AODABL (reaching up to 0.45), drier conditions (RH 25–60 %), larger particles (ÅEABL of 0.8–1.7; FCMR of 0.2–1.5), and a higher LRABL of up to 90 sr.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Pandit, P. H., U. Khot, S. D. Jawak, and A. J. Luis. "SPATIOTEMPORAL CHANGES IN VELOCITY OF MELLOR GLACIER, EAST ANTARCTICA USING LANDSAT-8 DATA." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-5 (November 19, 2018): 787–89. http://dx.doi.org/10.5194/isprs-archives-xlii-5-787-2018.

Повний текст джерела

Анотація:

Abstract. Glaciers all over the world are experiencing changes at varying stages due to changing climatic conditions. Minuscule changes in the glaciers in Antarctica can thus have major implications. The velocity of glaciers is important in several aspects of glaciology. A glacier’s movement is caused by different factors such as gravity, internal deformation present in the ice, pressure caused by accumulation of snow, basal sliding etc. The velocity of a glacier is an important factor governing mass balance and the stability of the glacier. A glacier which moves fast generally brings more ice towards the terminus than a slow moving glacier. Thus, the glacier velocity can determine its load carrying capacity and gives indication on the ‘health’ of the glacier. Measurement of the ice flow velocity can help model glacier dynamics and thus provide increasing insights on different glacier subtleties. However, field measurements of velocity are limited in spatial and temporal domains because these operations are manual, tedious and logistically expensive. Remote sensing is a tool to monitor and generate such data without the need for physical expeditions. This study uses optical satellite imagery to understand the mechanisms involved in the movement of a glacier. Optical image correlation method (COSI-Corr module) is chosen here as the promising method to derive displacement of a moving glacier. The principle involved in this technique is that two images acquired at different times are correlated to find the shift in the position of moving ice, which is then treated as displacement in the time interval. Employing this technique we estimated the velocity of Mellor glacier (73°30′S, 66°30′E), a tributary glacier of the Amery Ice Shelf, Antarctica, over a span of four years from 2014 to 2017. Correlation is performed using Landsat-8 panchromatic images of 15 m resolution. Optical images from Landsat 8 often have noise due to atmospheric conditions such as cloud cover, so we used only those images cloud with cloud cover less than 10%. The glacier is covered in 128 path frame and 112 by Landsat-8. The correlation frequency was calculated using the correlator engine. Window size taken here is 256 and step sizes is 64 for both x and y dimensions. Once the correlation is calculated for an image pair for a specific time-period, we obtain three different outputs. Two of them indicated displacement (one in x direction and another in y direction) and the remaining output provided signal to noise ratio. The band math tool using displacement outputs in ENVI software performed velocity calculations. This gives us a raster image showing velocity at each point or pixel. Some errors such as noise persist and their correction is performed in ArcGIS software. In order to get pure signals, we removed all the signals with a signal to noise ratio less than 0.9 and this was carried out using raster calculator tool. All the resultant velocity rasters were interpolated and bias was calculated between seasons of two consecutive years. Two maps were generated for each year, one for early summer i.e. from January to April and one from September to December using the resultant velocity raster. The mean values of velocities found for Mellor glacier from Jan-April 2014, 2015, 2016 and 2017 were 374.06ma&minus;1, 413.59ma&minus;1, 278.62ma&minus;1 and 406.66ma&minus;1, respectively. Velocities for September-December 2014, 2015, 2016 and 2017 were found to be 334.63ma&minus;1, 334.43ma&minus;1, 367.37ma&minus;1 and 381.31ma&minus;1, respectively. The biases are computed for all the seasons of four years and root mean square (RMSE) values are estimated. These RMSE values signify the season-wise variations in the velocities. RMSE values for season of Jan–April 2014–15, 2015–16 and 2016–17 were 75.92ma&minus;1, 147.82ma&minus;1, and 133.33ma&minus;1, respectively. Similarly, RMSE values for season of September-December 2014–15, 2015–16 and 2016–17 are 35.7ma&minus;1, 51.29ma&minus;1 and 35.84ma&minus;1 respectively. The results showed variations in velocities for different seasons. We plan to integrate this data with the discharge rates, to estimate mass balance and melting rates of the glacier to decipher mechanisms at work for the Mellor glacier.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Rodrigues, A. S., T. Ribeiro, F. Fernandes, J. P. S. Farinha, and C. Baleizão. "Intrinsically fluorescent silica nanocontainers: a promising theranostic platform." Microscopy and Microanalysis 19, S4 (August 2013): 73–74. http://dx.doi.org/10.1017/s1431927613000986.

Повний текст джерела

Анотація:

A large decrease in the side effects of a drug can be obtained if it is efficiently delivered in a timely manner and in the needed location only. By combining therapeutic and diagnostic (theranostic) functionalities with targeting capabilities and large surface areas, nanoparticles provide an ideal vehicle for personalized medicine.The main objective of our work is to develop hybrid Mesoporous Silica Nanoparticles (MSNs) for theranostics, carrying fluorescent beacons for traceability and imaging, featuring a smart release control mechanism, able to accommodate large drug loads and to deliver their cargo on demand to a desired location. This communication focus on the preparation of the fluorescent MSNs, and characterization by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and laser scanning fluorescence confocal microscopy (LSFCM).Mesoporous Silica Nanoparticles (MSNs) with well-defined and controllable particle morphology are exceptional supports/nanocontainers for molecules and polymers.This class of materials are characterized by an ordered pore system of 2-8nm diameter, pore volumes above 1mL/g and particle size from 40nm to several hundred nanometers. The preparation of fluorescent hybrid MSNs involves the presence of a fluorescent molecule during particle synthesis, which becomes aligned with the pores, thus impervious to aggregation and self-quenching effects. The MSNs external surface can be selectively functionalized to immobilize polymers or (bio)molecules for possible targeting or sensing, and the pore is available for solvent diffusion, allowing the incorporation of different molecules.We prepared monodispersed hybrid MSNs incorporating a fluorescent perylenediimide (PDI) derivative in the wall structure. The MSN-PDI were characterized by TEM (Figure 1), SEM and fluorescence emission spectroscopy. LSFCM images of the MSN-PDI after incubation in HEK293 cells show the internalization of the nanoparticles (Figure 2). These new hybrid nanoparticles, after surface-functionalization with stimuli-responsive gate systems, open possibilities for the development of traceable drug delivery systems.This work was partially supported by Fundação para a Ciência e a Tecnologia (FCT-Portugal) and COMPETE (FEDER) within projects PTDC/CTM/101627/2008 and PEst-OE/CTM/LA0024/2011. T.R. and F.F. also thank FCT for Ph.D. (SFRH/BD/64702/2009) and Pos-Doc (SFRH/BPD/64320/2009) grants.

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Nayyar, Anand, Pijush Kanti Dutta Pramankit, and Rajni Mohana. "Introduction to the Special Issue on Evolving IoT and Cyber-Physical Systems: Advancements, Applications, and Solutions." Scalable Computing: Practice and Experience 21, no. 3 (August 1, 2020): 347–48. http://dx.doi.org/10.12694/scpe.v21i3.1568.

Повний текст джерела

Анотація:

Internet of Things (IoT) is regarded as a next-generation wave of Information Technology (IT) after the widespread emergence of the Internet and mobile communication technologies. IoT supports information exchange and networked interaction of appliances, vehicles and other objects, making sensing and actuation possible in a low-cost and smart manner. On the other hand, cyber-physical systems (CPS) are described as the engineered systems which are built upon the tight integration of the cyber entities (e.g., computation, communication, and control) and the physical things (natural and man-made systems governed by the laws of physics). The IoT and CPS are not isolated technologies. Rather it can be said that IoT is the base or enabling technology for CPS and CPS is considered as the grownup development of IoT, completing the IoT notion and vision. Both are merged into closed-loop, providing mechanisms for conceptualizing, and realizing all aspects of the networked composed systems that are monitored and controlled by computing algorithms and are tightly coupled among users and the Internet. That is, the hardware and the software entities are intertwined, and they typically function on different time and location-based scales. In fact, the linking between the cyber and the physical world is enabled by IoT (through sensors and actuators). CPS that includes traditional embedded and control systems are supposed to be transformed by the evolving and innovative methodologies and engineering of IoT. Several applications areas of IoT and CPS are smart building, smart transport, automated vehicles, smart cities, smart grid, smart manufacturing, smart agriculture, smart healthcare, smart supply chain and logistics, etc. Though CPS and IoT have significant overlaps, they differ in terms of engineering aspects. Engineering IoT systems revolves around the uniquely identifiable and internet-connected devices and embedded systems; whereas engineering CPS requires a strong emphasis on the relationship between computation aspects (complex software) and the physical entities (hardware). Engineering CPS is challenging because there is no defined and fixed boundary and relationship between the cyber and physical worlds. In CPS, diverse constituent parts are composed and collaborated together to create unified systems with global behaviour. These systems need to be ensured in terms of dependability, safety, security, efficiency, and adherence to real‐time constraints. Hence, designing CPS requires knowledge of multidisciplinary areas such as sensing technologies, distributed systems, pervasive and ubiquitous computing, real-time computing, computer networking, control theory, signal processing, embedded systems, etc. CPS, along with the continuous evolving IoT, has posed several challenges. For example, the enormous amount of data collected from the physical things makes it difficult for Big Data management and analytics that includes data normalization, data aggregation, data mining, pattern extraction and information visualization. Similarly, the future IoT and CPS need standardized abstraction and architecture that will allow modular designing and engineering of IoT and CPS in global and synergetic applications. Another challenging concern of IoT and CPS is the security and reliability of the components and systems. Although IoT and CPS have attracted the attention of the research communities and several ideas and solutions are proposed, there are still huge possibilities for innovative propositions to make IoT and CPS vision successful. The major challenges and research scopes include system design and implementation, computing and communication, system architecture and integration, application-based implementations, fault tolerance, designing efficient algorithms and protocols, availability and reliability, security and privacy, energy-efficiency and sustainability, etc. It is our great privilege to present Volume 21, Issue 3 of Scalable Computing: Practice and Experience. We had received 30 research papers and out of which 14 papers are selected for publication. The objective of this special issue is to explore and report recent advances and disseminate state-of-the-art research related to IoT, CPS and the enabling and associated technologies. The special issue will present new dimensions of research to researchers and industry professionals with regard to IoT and CPS. Vivek Kumar Prasad and Madhuri D Bhavsar in the paper titled "Monitoring and Prediction of SLA for IoT based Cloud described the mechanisms for monitoring by using the concept of reinforcement learning and prediction of the cloud resources, which forms the critical parts of cloud expertise in support of controlling and evolution of the IT resources and has been implemented using LSTM. The proper utilization of the resources will generate revenues to the provider and also increases the trust factor of the provider of cloud services. For experimental analysis, four parameters have been used i.e. CPU utilization, disk read/write throughput and memory utilization. Kasture et al. in the paper titled "Comparative Study of Speaker Recognition Techniques in IoT Devices for Text Independent Negative Recognition" compared the performance of features which are used in state of art speaker recognition models and analyse variants of Mel frequency cepstrum coefficients (MFCC) predominantly used in feature extraction which can be further incorporated and used in various smart devices. Mahesh Kumar Singh and Om Prakash Rishi in the paper titled "Event Driven Recommendation System for E-Commerce using Knowledge based Collaborative Filtering Technique" proposed a novel system that uses a knowledge base generated from knowledge graph to identify the domain knowledge of users, items, and relationships among these, knowledge graph is a labelled multidimensional directed graph that represents the relationship among the users and the items. The proposed approach uses about 100 percent of users' participation in the form of activities during navigation of the web site. Thus, the system expects under the users' interest that is beneficial for both seller and buyer. The proposed system is compared with baseline methods in area of recommendation system using three parameters: precision, recall and NDGA through online and offline evaluation studies with user data and it is observed that proposed system is better as compared to other baseline systems. Benbrahim et al. in the paper titled "Deep Convolutional Neural Network with TensorFlow and Keras to Classify Skin Cancer" proposed a novel classification model to classify skin tumours in images using Deep Learning methodology and the proposed system was tested on HAM10000 dataset comprising of 10,015 dermatoscopic images and the results observed that the proposed system is accurate in order of 94.06\% in validation set and 93.93\% in the test set. Devi B et al. in the paper titled "Deadlock Free Resource Management Technique for IoT-Based Post Disaster Recovery Systems" proposed a new class of techniques that do not perform stringent testing before allocating the resources but still ensure that the system is deadlock-free and the overhead is also minimal. The proposed technique suggests reserving a portion of the resources to ensure no deadlock would occur. The correctness of the technique is proved in the form of theorems. The average turnaround time is approximately 18\% lower for the proposed technique over Banker's algorithm and also an optimal overhead of O(m). Deep et al. in the paper titled "Access Management of User and Cyber-Physical Device in DBAAS According to Indian IT Laws Using Blockchain" proposed a novel blockchain solution to track the activities of employees managing cloud. Employee authentication and authorization are managed through the blockchain server. User authentication related data is stored in blockchain. The proposed work assists cloud companies to have better control over their employee's activities, thus help in preventing insider attack on User and Cyber-Physical Devices. Sumit Kumar and Jaspreet Singh in paper titled "Internet of Vehicles (IoV) over VANETS: Smart and Secure Communication using IoT" highlighted a detailed description of Internet of Vehicles (IoV) with current applications, architectures, communication technologies, routing protocols and different issues. The researchers also elaborated research challenges and trade-off between security and privacy in area of IoV. Deore et al. in the paper titled "A New Approach for Navigation and Traffic Signs Indication Using Map Integrated Augmented Reality for Self-Driving Cars" proposed a new approach to supplement the technology used in self-driving cards for perception. The proposed approach uses Augmented Reality to create and augment artificial objects of navigational signs and traffic signals based on vehicles location to reality. This approach help navigate the vehicle even if the road infrastructure does not have very good sign indications and marking. The approach was tested locally by creating a local navigational system and a smartphone based augmented reality app. The approach performed better than the conventional method as the objects were clearer in the frame which made it each for the object detection to detect them. Bhardwaj et al. in the paper titled "A Framework to Systematically Analyse the Trustworthiness of Nodes for Securing IoV Interactions" performed literature on IoV and Trust and proposed a Hybrid Trust model that seperates the malicious and trusted nodes to secure the interaction of vehicle in IoV. To test the model, simulation was conducted on varied threshold values. And results observed that PDR of trusted node is 0.63 which is higher as compared to PDR of malicious node which is 0.15. And on the basis of PDR, number of available hops and Trust Dynamics the malicious nodes are identified and discarded. Saniya Zahoor and Roohie Naaz Mir in the paper titled "A Parallelization Based Data Management Framework for Pervasive IoT Applications" highlighted the recent studies and related information in data management for pervasive IoT applications having limited resources. The paper also proposes a parallelization-based data management framework for resource-constrained pervasive applications of IoT. The comparison of the proposed framework is done with the sequential approach through simulations and empirical data analysis. The results show an improvement in energy, processing, and storage requirements for the processing of data on the IoT device in the proposed framework as compared to the sequential approach. Patel et al. in the paper titled "Performance Analysis of Video ON-Demand and Live Video Streaming Using Cloud Based Services" presented a review of video analysis over the LVS \& VoDS video application. The researchers compared different messaging brokers which helps to deliver each frame in a distributed pipeline to analyze the impact on two message brokers for video analysis to achieve LVS & VoS using AWS elemental services. In addition, the researchers also analysed the Kafka configuration parameter for reliability on full-service-mode. Saniya Zahoor and Roohie Naaz Mir in the paper titled "Design and Modeling of Resource-Constrained IoT Based Body Area Networks" presented the design and modeling of a resource-constrained BAN System and also discussed the various scenarios of BAN in context of resource constraints. The Researchers also proposed an Advanced Edge Clustering (AEC) approach to manage the resources such as energy, storage, and processing of BAN devices while performing real-time data capture of critical health parameters and detection of abnormal patterns. The comparison of the AEC approach is done with the Stable Election Protocol (SEP) through simulations and empirical data analysis. The results show an improvement in energy, processing time and storage requirements for the processing of data on BAN devices in AEC as compared to SEP. Neelam Saleem Khan and Mohammad Ahsan Chishti in the paper titled "Security Challenges in Fog and IoT, Blockchain Technology and Cell Tree Solutions: A Review" outlined major authentication issues in IoT, map their existing solutions and further tabulate Fog and IoT security loopholes. Furthermore, this paper presents Blockchain, a decentralized distributed technology as one of the solutions for authentication issues in IoT. In addition, the researchers discussed the strength of Blockchain technology, work done in this field, its adoption in COVID-19 fight and tabulate various challenges in Blockchain technology. The researchers also proposed Cell Tree architecture as another solution to address some of the security issues in IoT, outlined its advantages over Blockchain technology and tabulated some future course to stir some attempts in this area. Bhadwal et al. in the paper titled "A Machine Translation System from Hindi to Sanskrit Language Using Rule Based Approach" proposed a rule-based machine translation system to bridge the language barrier between Hindi and Sanskrit Language by converting any test in Hindi to Sanskrit. The results are produced in the form of two confusion matrices wherein a total of 50 random sentences and 100 tokens (Hindi words or phrases) were taken for system evaluation. The semantic evaluation of 100 tokens produce an accuracy of 94\% while the pragmatic analysis of 50 sentences produce an accuracy of around 86\%. Hence, the proposed system can be used to understand the whole translation process and can further be employed as a tool for learning as well as teaching. Further, this application can be embedded in local communication based assisting Internet of Things (IoT) devices like Alexa or Google Assistant. Anshu Kumar Dwivedi and A.K. Sharma in the paper titled "NEEF: A Novel Energy Efficient Fuzzy Logic Based Clustering Protocol for Wireless Sensor Network" proposed a a deterministic novel energy efficient fuzzy logic-based clustering protocol (NEEF) which considers primary and secondary factors in fuzzy logic system while selecting cluster heads. After selection of cluster heads, non-cluster head nodes use fuzzy logic for prudent selection of their cluster head for cluster formation. NEEF is simulated and compared with two recent state of the art protocols, namely SCHFTL and DFCR under two scenarios. Simulation results unveil better performance by balancing the load and improvement in terms of stability period, packets forwarded to the base station, improved average energy and extended lifetime.

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Alyazeedi, Hamdia Hmmad. "March 2016 VOLUME 3, ISSUE 3, MARCH 2016 Composite Silicon Solar Cell Efficiency Simulation Study; Sensitivity to the Absorption Coefficients and the Thickness of Intrinsic Absorber Layer V. Tudić, M. Marochini, T. Luke Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3301 Molecular Phylogeny of Turbinaria Ornata (Turner) J. Agardh E. Neelamathi and R. Kannan Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3302 Human Factors in Aircraft Maintenance Suhas H Begur, Dr J Ashok Babu Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3303 Human Factors in Aircraft Maintenance Suhas H Begur, Dr J Ashok Babu Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3304 Foliar nutraceutical and antioxidant property of Diospyros lanceifolia Roxb. (Ebenaceae) – An important medicinal plant of Assam, India Dipjyoti Kalita, N. Devi and D. Baishya Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3305 Study of Ion Mobility Characteristics and Morphology of some Electrochemically-Synthesised Polypyrroles Danesh Roudini, Peter J. S. Foot Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3306 Physico-Chemical Characterization of an Artificial Pond to Control the Eutrophication Process: A Case Study Sameer Al-Asheh, Hani Abu Qdais, Adnan Alquraishi, Osama Husain, Ismail Sadoon Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3307 Survey: Recommendation System for Web Portal using Customer Segmentation Neha Badami, Vipul Wakkar, Monica Jain, Devendra Pandit Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3308 Web Archiving: Past Present and Future of Evolving Multimedia Legacy Meenakshi Srivastava, Dr. S.K. Singh, Dr. S.Q. Abbas Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3309 Labour Contract Management System Kajol Bhutada, Ketaki Kivade, Vishakha Gokhale, Pallavi Bhore, Prof. Shiv Prasad P. Patil Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3310 Minimization of Torque Ripple and Multi Quadrant Operation of Direct Torque Control for Three Phase Induction Motor Using Fuzzy Logic Controller P.Ramesh Babu, S. Ramprasath, N.Vijayasarathi Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3311 Alert Me: A Real Time Video Surveillance System Implementing IoT D.P Gaikwad, Pooja kumawat, Saurabh Bhalerao, Akhilesh Khalate, Hrishikesh Dongre Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3312 Validity, Reliability and Item Analysis of AMAIUB Admission Test Dr. Lina S. Calucag and Dr. Danilo A. Tabalan Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3313 Design and Analysis of Track and Hold Circuit for high speed communication Smita D. Waghmare, Dr. U. A. Kshirsagar Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3314 Design of Low Power Digitally Operated Voltage Regulator by using CMOS Technology Nikita V. Dhomane, Dr. U. A. Kshirsagar Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3315 Automation in Ration Distribution System Rajesh B.Shinde, Prof. A.G. Gaikwad, Prof. Sonali Chincholikar Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3316 Use of MnSo4 Sludge as a Partial Replacement for Cement in Concrete Golhar Ankush, Jogdand Mohini, Malvi Ketan, Salunke Swanand, Gorade Swapnil Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3317 Ethnobotanical Studies on Medicinal Plant Utilization by the Yanadhi Tribe of Ananthasagaram Mandal, Nellore District, Andhra Pradesh, India K. Sasdhar, P. Brahmajirao and A. Sujith Kumar Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3318 Effect of Soil Structure Interaction on the Storey Lateral Displacement of a Multi Storied Building Surya Teja Ch, Sai Kiran T Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3319 An Overview of Narcolepsy Touseef Rahman, Omer Farook, Md Belal Bin Heyat, Mohd Maroof Siddiqui Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3320 Significance of Air Movement for Thermal Comfort in Educational Buildings, Case Study of a Classroom Geethu Priya, Nagaraju Kaja Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3321 A Load Balancing Approach to Minimize the Resource Wastage in Cloud Computing Sachin Soni, Praveen Yadav Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3322 Modeling and Simulation of Fluidized Bed Drying of Chickpea S.N. Saha, G.P. Dewangan, R.S. Thakur Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3323 Photocatalytic-Ozonation of Textile Dyeing Wastewater using Fixed Catalyst System Rajendiran S, Shriram B, Kanmani S Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3324 Mesh less Analysis of Orthotropic Skew Plate under Sinusoidal Line Load Kumari Shipra Suman, Jeeoot Singh Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3325 Performance Analysis of 2*2 Dual Frequency Wide Band Circular Patch Antenna Array P. Sai Vinay Kumar, P. Jagadamba, M. N. Giri Prasad Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3326 A Multi-Cloud Approach Towards Addressing Security Issues of Cloud: A Survey Kumar M.V, Poornima A. S Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3327 Improved Efficiency of Boiler Plant with Different GCV and Carbon Percentage Ishan. P. Bhatt, C.P. Panchal Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3328 Industrial Automation using Sensing based Applications for Internet of Things Geetesh Chaudhari, Sudarshan Jadhav, Sandeep Batule, Sandeep Helkar Abstract | PDF with Text| DOI 10.17148/IARJSET.2016.3329 Assessment of Engineering Students Learning." IARJSET 3, no. 3 (March 20, 2016): 133–36. http://dx.doi.org/10.17148/iarjset.2016.3330.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Andre, E., E. Yaniz-Galende, C. Hamilton, G. J. Dusting, N. Hellen, CE Poulet, M. Diez Cunado, et al. "Poster session 1Cell growth, differentiation and stem cells - Heart72Understanding the metabolism of cardiac progenitor cells: a first step towards controlling their proliferation and differentiation?73Expression of pw1/peg3 identifies a new cardiac adult stem cell population involved in post-myocardial infarction remodeling74Long-term stimulation of iPS-derived cardiomyocytes using optogenetic techniques to promote phenotypic changes in E-C coupling75Benefits of electrical stimulation on differentiation and maturation of cardiomyocytes from human induced pluripotent stem cells76Constitutive beta-adrenoceptor-mediated cAMP production controls spontaneous automaticity of human induced pluripotent stem cell-derived cardiomyocytes77Formation and stability of T-tubules in cardiomyocytes78Identification of miRNAs promoting human cardiomyocyte proliferation by regulating Hippo pathway79A direct comparison of foetal to adult epicardial cell activation reveals distinct differences relevant for the post-injury response80Role of neuropilins in zebrafish heart regeneration81Highly efficient immunomagnetic purification of cardiomyocytes derived from human pluripotent stem cells82Cardiac progenitor cells posses a molecular circadian clock and display large 24-hour oscillations in proliferation and stress tolerance83Influence of sirolimus and everolimus on bone marrow-derived mesenchymal stem cell biology84Endoglin is important for epicardial behaviour following cardiac injuryCell death and apoptosis - Heart87Ultrastructural alterations reflecting Ca2+ handling and cell-to-cell coupling disorders precede occurrence of severe arrhythmias in intact animal heart88Urocortin-1 promotes cardioprotection through ERK1/2 and EPAC pathways: role in apoptosis and necrosis89Expression p38 MAPK and Cas-3 in myocardium LV of rats with experimental heart failure at melatonin and enalapril introductionTranscriptional control and RNA species - Heart92Accumulation of beta-amyloid 1-40 in HF patients: the role of lncRNA BACE1-AS93Role of miR-182 in zebrafish and mouse models of Holt-Oram syndrome94Mir-27 distinctly regulates muscle-enriched transcription factors and growth factors in cardiac and skeletal muscle cells95AF risk factors impair PITX2 expression leading to Wnt-microRNA-ion channel remodelingCytokines and cellular inflammation - Heart98Post-infarct survival depends on the interplay of monocytes, neutrophils and interferon gamma in a mouse model of myocardial Infarction99Inflammatory cd11b/c cells play a protective role in compensated cardiac hypertrophy by promoting an orai3-related pro-survival signal100Anti-inflammatory effects of endothelin receptor blockade in the atrial tissue of spontaneously hypertensive rats101Mesenchymal stromal cells reduce NLRP3 inflammasome activity in Coxsackievirus B3-induced myocarditis102Mesenchymal stromal cells modulate monocytes trafficking in Coxsackievirus B3-induced myocarditis103The impact of regulatory T lymphocytes on long-term mortality in patients with chronic heart failure104Temporal dynamics of dendritic cells after ST-elevation myocardial infarction relate with improvement of myocardial functionGrowth factors and neurohormones - Heart107Preconditioning of hypertrophied heart: miR-1 and IGF-1 crosstalk108Modulation of catecholamine secretion from human adrenal chromaffin cells by manipulation of G protein-coupled receptor kinase-2 activity109Evaluation of cyclic adenosin-3,5- monophosphate and neurohormones in patients with chronic heart failureNitric oxide and reactive oxygen species - Heart112Hydrogen sulfide donor inhibits oxidative and nitrosative stress, cardiohemodynamics disturbances and restores cNOS coupling in old rats113Role and mechanisms of action of aldehydes produced by monoamine oxidase A in cardiomyocyte death and heart failure114Exercise training has contrasting effects in myocardial infarction and pressure-overload due to different endothelial nitric oxide synthase regulation115S-Nitroso Human Serum Albumin dose-dependently leads to vasodilation and alters reactive hyperaemia in coronary arteries of an isolated mouse heart model116Modulating endothelial nitric oxide synthase with folic acid attenuates doxorubicin-induced cardiomyopathy119Effects of long-term very high intensity exercise on aortic structure and function in an animal model120Electron paramagnetic resonance spectroscopy quantification of nitrosylated hemoglobin (HbNO) as an index of vascular nitric oxide bioavailability in vivo121Deletion of repressor activator protein 1 impairs acetylcholine-induced relaxation due to production of reactive oxygen speciesExtracellular matrix and fibrosis - Heart124MicroRNA-19b is associated with myocardial collagen cross-linking in patients with severe aortic stenosis. Potential usefulness as a circulating biomarker125A new ex vivo model to study cardiac fibrosis126Heterogeneity of fibrosis and fibroblast differentiation in the left ventricle after myocardial infarction127Effect of carbohydrate metabolism degree compensation to the level of galectin-3 changes in hypertensive patients with chronic heart failure and type 2 diabetes mellitus128Statin paradox in association with calcification of bicuspid aortic valve interstitial cells129Cardiac function remains impaired despite reversible cardiac fibrosis after healed experimental viral myocarditisIon channels, ion exchangers and cellular electrophysiology - Heart132Identifying a novel role for PMCA1 (Atp2b1) in heart rhythm instability133Mutations of the caveolin-3 gene as a predisposing factor for cardiac arrhythmias134The human sinoatrial node action potential: time for a computational model135iPSC-derived cardiomyocytes as a model to dissect ion current alterations of genetic atrial fibrillation136Postextrasystolic potentiation in healthy and diseased hearts: effects of the site of origin and coupling interval of the preceding extrasystole137Absence of Nav1.8-based (late) sodium current in rabbit cardiomyocytes and human iPSC-CMs138hiPSC-derived cardiomyocytes from Brugada Syndrome patients without identified mutations do not exhibit cellular electrophysiological abnormalitiesMicrocirculation141Atherogenic indices, collagen type IV turnover and the development of microvascular complications- study in diabetics with arterial hypertension142Changes in the microvasculature and blood viscosity in women with rheumatoid arthritis, hypercholesterolemia and hypertensionAtherosclerosis145Shear stress regulates endothelial autophagy: consequences on endothelial senescence and atherogenesis146Obstructive sleep apnea causes aortic remodeling in a chronic murine model147Aortic perivascular adipose tissue displays an aged phenotype in early and late atherosclerosis in ApoE-/- mice148A systematic evaluation of the cellular innate immune response during the process of human atherosclerosis149Inhibition of Coagulation factor Xa increases plaque stability and attenuates the onset and progression of atherosclerotic plaque in apolipoprotein e-deficient mice150Regulatory CD4+ T cells from patients with atherosclerosis display pro-inflammatory skewing and enhanced suppression function151Hypoxia-inducible factor (HIF)-1alpha regulates macrophage energy metabolism by mediating miRNAs152Extracellular S100A4 is a key player of smooth muscle cell phenotypic transition: implications in atherosclerosis153Microparticles of healthy origins improve atherosclerosis-associated endothelial progenitor cell dysfunction via microRNA transfer154Arterial remodeling and metabolism impairment in early atherosclerosis155Role of pannexin1 in atherosclerotic plaque formationCalcium fluxes and excitation-contraction coupling158Amphiphysin II induces tubule formation in cardiac cells159Interleukin 1 beta regulation of connexin 43 in cardiac fibroblasts and the effects of adult cardiac myocyte:fibroblast co-culture on myocyte contraction160T-tubular electrical defects contribute to blunted beta-adrenergic response in heart failure161Beat-to-beat variability of intracellular Ca2+ dynamics of Purkinje cells in the infarct border zone of the mouse heart revealed by rapid-scanning confocal microscopy162The efficacy of late sodium current blockers in hypertrophic cardiomyopathy is dependent on genotype: a study on transgenic mouse models with different mutations163Synthesis of cADPR and NAADP by intracellular CD38 in heart: role in inotropic and arrhythmogenic effects of beta-adrenoceptor signalingContractile apparatus166Towards an engineered heart tissue model of HCM using hiPSC expressing the ACTC E99K mutation167Diastolic mechanical load delays structural and functional deterioration of ultrathin adult heart slices in culture168Structural investigation of the cardiac troponin complex by molecular dynamics169Exercise training restores myocardial and oxidative skeletal muscle function from myocardial infarction heart failure ratsOxygen sensing, ischaemia and reperfusion172A novel antibody specific to full-length stromal derived factor-1 alpha reveals that remote conditioning induces its cleavage by endothelial dipeptidyl peptidase 4173Attenuation of myocardial and vascular arginase activity by vagal nerve stimulation via a mechanism involving alpha-7 nicotinic receptor during cardiac ischemia and reperfusion174Novel nanoparticle-mediated medicine for myocardial ischemia-reperfusion injury simultaneously targeting mitochondrial injury and myocardial inflammation175Acetylcholine plays a key role in myocardial ischaemic preconditioning via recruitment of intrinsic cardiac ganglia176The role of nitric oxide and VEGFR-2 signaling in post ischemic revascularization and muscle recovery in aged hypercholesterolemic mice177Efficacy of ischemic preconditioning to protect the human myocardium: the role of clinical conditions and treatmentsCardiomyopathies and fibrosis180Plakophilin-2 haploinsufficiency leads to impaired canonical Wnt signaling in ARVC patient181Improved technique for customized, easier, safer and more reliable transverse aortic arch banding and debanding in mice as a model of pressure overload hypertrophy182Late sodium current inhibitors for the treatment of inducible obstruction and diastolic dysfunction in hypertrophic cardiomyopathy: a study on human myocardium183Angiotensin II receptor antagonist fimasartan has protective role of left ventricular fibrosis and remodeling in the rat ischemic heart184Role of High-Mobility Group Box 1 (HMGB1) redox state on cardiac fibroblasts activities and heart function after myocardial infarction185Atrial remodeling in hypertrophic cardiomyopathy: insights from mouse models carrying different mutations in cTnT186Electrophysiological abnormalities in ventricular cardiomyocytes from a Maine Coon cat with hypertrophic cardiomyopathy: effects of ranolazine187ZBTB17 is a novel cardiomyopathy candidate gene and regulates autophagy in the heart188Inhibition of SRSF4 in cardiomyocytes induces left ventricular hypertrophy189Molecular characterization of a novel cardiomyopathy related desmin frame shift mutation190Autonomic characterisation of electro-mechanical remodeling in an in-vitro leporine model of heart failure191Modulation of Ca2+-regulatory function by three novel mutations in TNNI3 associated with severe infant restrictive cardiomyopathyAging194The aging impact on cardiac mesenchymal like stromal cells (S+P+)195Reversal of premature aging markers after bariatric surgery196Sex-associated differences in vascular remodeling during aging: role of renin-angiotensin system197Role of the receptor for advanced glycation end-products (RAGE) in age dependent left ventricle dysfunctionsGenetics and epigenetics200hsa-miR-21-5p as a key factor in aortic remodeling during aneurysm formation201Co-inheritance of mutations associated with arrhythmogenic and hypertrophic cardiomyopathy in two Italian families202Lamin a/c hot spot codon 190: form various amino acid substitutions to clinical effects203Treatment with aspirin and atorvastatin attenuate cardiac injury induced by rat chest irradiation: Implication of myocardial miR-1, miR-21, connexin-43 and PKCGenomics, proteomics, metabolomics, lipidomics and glycomics206Differential phosphorylation of desmin at serines 27 and 31 drives the accumulation of preamyloid oligomers in heart failure207Potential role of kinase Akt2 in the reduced recovery of type 2 diabetic hearts subjected to ischemia / reperfusion injury208A proteomics comparison of extracellular matrix remodelling in porcine coronary arteries upon stent implantationMetabolism, diabetes mellitus and obesity211Targeting grk2 as therapeutic strategy for cancer associated to diabetes212Effects of salbutamol on large arterial stiffness in patients with metabolic syndrome213Circulating microRNA-1 and microRNA-133a: potential biomarkers of myocardial steatosis in type 2 diabetes mellitus214Anti-inflammatory nutrigenomic effects of hydroxytyrosol in human adipocytes - protective mechanisms of mediterranean diets in obesity-related inflammation215Alterations in the metal content of different cardiac regions within a rat model of diabetic cardiomyopathyTissue engineering218A novel conductive patch for application in cardiac tissue engineering219Establishment of a simplified and improved workflow from neonatal heart dissociation to cardiomyocyte purification and characterization220Effects of flexible substrate on cardiomyocytes cell culture221Mechanical stretching on cardiac adipose progenitors upregulates sarcomere-related genes." Cardiovascular Research 111, suppl 1 (July 1, 2016): S16—S42. http://dx.doi.org/10.1093/cvr/cvw135.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Jara, Carlos Poblete, Juliany Lino Gomes Silva, Flávia Cristina Zanchetta, Thais Rojo, and Maria Helena Melo Lima. "Biofilme e feridas crônicas: reflexões para o cuidado de enfermagem." Revista Enfermagem Atual In Derme 81, no. 19 (April 8, 2019). http://dx.doi.org/10.31011/reaid-2017-v.81-n.19-art.324.

Повний текст джерела

Анотація:

Objetiva-se refletir sobre o tema biofilme e ferida crônica para o cuidado de enfermagem. Estudo teórico-reflexivo,no qual os dados foram baseados em pesquisa na base de dados Scientific Electronic Library Online (SciELO) ePubMed, no período de 2010 à 2015, utilizando-se os descritores infecção, biofilmes e cicatrização de feridas. Osresultados apresentaram o crescimento microbiano em feridas crônicas é uma preocupação na prática clínica e apresença do biofilme prejudica o processo de cicatrização. O biofilme obtém nutrientes do plasma e do exsudatopresentes no leito da ferida, e regula o metabolismo, a virulência e motilidade pela liberação e detecção demoléculas denominadas de quorum sensing. Abordagens no tratamento de feridas crônicas com foco no biofilmeconsistem na avaliação das características da ferida e na utilização de métodos de desbridamento para remoçãoda necrose e do esfacelo. Concluí-se que a limpeza do leito da ferida e o uso de antimicrobianos contribuem para ocontrole da carga microbiana, mas a administração destes produtos requer uma avaliação criteriosa. Novos métodosde diagnóstico para o controle do biofilme são necessários com vistas à prevenção, ao tratamento e cura das lesõesem menor tempo.Palavras-chave: Infecção; Biofilmes; Cicatrização de Feridas. ABSTRACTThe aim is to reflect on biofilms in chronic wound for nursing care. A theoretical and reflective study basedon Scientific Electronic Library Online (SciELO) and PubMed database, on the period 2010 to 2015. The useddescriptors were infection, biofilms and wound healing. The results showed the microbial growth in chronicwounds is a concern in a clinical practice, and the presence of biofilm harms the healing process. The biofilmobtains plasma and exudate nutrients found in the wound bed, and regulates metabolism, virulence and motilityby releasing and detecting molecules named quorum sensing. Approaches on treatment of chronic woundsfocused on biofilm consist on the evaluation of the wound characteristics and on the usage of debridementmethods to remove necrotic tissue and slough. It concludes that cleaning the wound bed help on controllingmicrobial load, but the usage of antimicrobial agents is also an expedient currently employed to control biofilm.The search for new diagnostic methods and biofilm control is necessary in order to prevent, to treat and to healthe wound in lesser time.Keywords: Infection; Biofilms; Wound Healing.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Irisawa, Taro, Tyler Vadeboncoeur, Cameron Hypes, Annemarie Silver, Robyn McDannold, Margaret Mullins, Dan Spaite, and Bentley Bobrow. "Abstract 17760: Maintaining High Quality CPR With an Integrated Manual/Mechanical Resuscitation Protocol." Circulation 132, suppl_3 (November 10, 2015). http://dx.doi.org/10.1161/circ.132.suppl_3.17760.

Повний текст джерела

Анотація:

Background: High quality manual chest compressions (CC) can be achieved on scene during resuscitation of cardiac arrest patients, but manual CC quality can deteriorate during patient extrication and transport. The purpose of this study was to describe the effect on CC quality of an integrated manual/mechanical chest compression protocol developed to maintain CC quality and patient/provider safety throughout resuscitation. Methods: CC quality was monitored using a monitor with accelerometer-based CC sensing (E Series/X Series, ZOLL Medical) during the treatment of consecutive out-of-hospital cardiac arrest patients between 3/1/2013-4/30/2015. The EMS agency performed manual CC guided by real-time audiovisual feedback on scene but deployed the AutoPulse load-distributing band CC device (LDB, ZOLL Medical) in a choreographed manner for extrication and transport. The LDB was also placed prophylactically on patients after ROSC. Descriptive statistics are reported as median (IQR). Results: A total of 71 OHCA patients were treated (median age 58 yrs, 66 % male) of which 39 received only manual CC and 32 received both manual and LDB CCs (22 with LDB deployed during ongoing manual CC and 10 with LDB placed after ROSC). With real-time CC feedback, high quality CCs were performed [depth 2.38 in (2.17-2.64), rate 100.3 cpm (99.2-102.5), CC fraction 87.0% (83.8-89.5)]. For patients requiring transport, the LDB was started after 14.2 min (11.6-19.2) of manual CC and was placed with minimal interruptions- total of 27.5 sec (23-42) pause time in 2 minutes prior to LDB deployment. During transport, CC fraction remained high (91.7%; 89.3-95.4) with use of LDB. Seven of 10 patients prophylactically placed on the LDB rearrested, 3 rearrested during transport. Conclusion: A choreographed and rehearsed integrated chest compression protocol featuring both manual and mechanical compressions, allows for high quality resuscitation with minimal compression interruptions. Placement of a mechanical device on patients after ROSC may be beneficial as over two-thirds of patients in this study rearrested, one-third of which occurred during transport when delivery of manual compressions is difficult and potentially dangerous.

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Colomer-Winter, C., A. L. Flores-Mireles, S. Kundra, S. J. Hultgren, and J. A. Lemos. "(p)ppGpp and CodY Promote Enterococcus faecalis Virulence in a Murine Model of Catheter-Associated Urinary Tract Infection." mSphere 4, no. 4 (July 24, 2019). http://dx.doi.org/10.1128/msphere.00392-19.

Повний текст джерела

Анотація:

ABSTRACT In Firmicutes, the nutrient-sensing regulators (p)ppGpp, the effector molecule of the stringent response, and CodY work in tandem to maintain bacterial fitness during infection. Here, we tested (p)ppGpp and codY mutant strains of Enterococcus faecalis in a catheter-associated urinary tract infection (CAUTI) mouse model and used global transcriptional analysis to investigate the relationship of (p)ppGpp and CodY. The absence of (p)ppGpp or single inactivation of codY led to lower bacterial loads in catheterized bladders and diminished biofilm formation on fibrinogen-coated surfaces under in vitro and in vivo conditions. Single inactivation of the bifunctional (p)ppGpp synthetase/hydrolase rel did not affect virulence, supporting previous evidence that the association of (p)ppGpp with enterococcal virulence is not dependent on the activation of the stringent response. Inactivation of codY in the (p)ppGpp0 strain restored E. faecalis virulence in the CAUTI model as well as the ability to form biofilms in vitro. Transcriptome analysis revealed that inactivation of codY restores, for the most part, the dysregulated metabolism of (p)ppGpp0 cells. While a clear linkage between (p)ppGpp and CodY with expression of virulence factors could not be established, targeted transcriptional analysis indicates that a possible association between (p)ppGpp and c-di-AMP signaling pathways in response to the conditions found in the bladder may play a role in enterococcal CAUTI. Collectively, data from this study identify the (p)ppGpp-CodY network as an important contributor to enterococcal virulence in catheterized mouse bladder and support that basal (p)ppGpp pools and CodY promote virulence through maintenance of a balanced metabolism under adverse conditions. IMPORTANCE Catheter-associated urinary tract infections (CAUTIs) are one of the most frequent types of infection found in the hospital setting that can develop into serious and potentially fatal bloodstream infections. One of the infectious agents that frequently causes complicated CAUTI is the bacterium Enterococcus faecalis, a leading cause of hospital-acquired infections that are often difficult to treat due to the exceptional multidrug resistance of some isolates. Understanding the mechanisms by which E. faecalis causes CAUTI will aid in the discovery of new druggable targets to treat these infections. In this study, we report the importance of two nutrient-sensing bacterial regulators, named (p)ppGpp and CodY, for the ability of E. faecalis to infect the catheterized bladder of mice.

Стилі APA, Harvard, Vancouver, ISO та ін.

Статті в журналах з теми "E-LOAD SENSING"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями