Дисертації з теми "Dynamic Performance Measurement"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-44 дисертацій для дослідження на тему "Dynamic Performance Measurement".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Salloum, Mohammed. "Towards dynamic performance measurement systems." Thesis, Mälardalen University, School of Innovation, Design and Engineering, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-10016.
Повний текст джерелаThe purpose of this report is to single out and apply the most critical factors for dynamic performance meausrement systems. The report concludes that the existence in practice of theoretically important aspects are diverse and that the most appropriate way of governing the aspects are through the creation of a performance management process.
The theoretical chapter is established for dual purposes. The first is to give the reader a comprehensive understanding of what has been done in the field of performance measurement and management so far and the second is to answer the first research question imposed.
The empirical chapter investigates to what degree the existence of factors singled out in theory are present in practice. Further, the chapter also answers research question two.
Finally the result and analysis chapters focuses on cross-analysing the case studies made and generate a recommendation. Research question three is answered under these headings.
PREPARE
KNOBEL, KARIN, and LOVISA LÆSTADIUS. "Big Data in Performance Measurement: : Towards a Framework for Performance Measurement in a Digital and Dynamic Business Climate." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-238689.
Повний текст джерелаI dagens affärsklimat genomsyrat av Big Data finns en möjlighet att driva resultat framåt genom analys av kundbeteenden från användardata. I synnerhet för online-tjänsteföretag samlas användardata kontinuerligt och finns tillgänglig i en oerhörd mängd. Detta skapar nya möjligheter för design och användande av mätetal då företag kan utveckla smartare och snabbare beslutsfattande. För att verkligen dra fördel av användardata i prestationsmätning (PM) är det dock kritiskt att identifiera mätetal som faktiskt bistår beslutsfattande, vilket följaktligen kräver en effektiv PM-process. Trots potentialen är forskning på Big Data inom PM begränsad. Studier har analyserat kundbeteenden från användardata, exempelvis i kontexten av strömmad video eller audio och webbsökningar, men primärt med fokus på tjänstens tekniska prestanda. Vidare är forskning på PM hos online-tjänsteföretag fragmenterad, och huvudsakligen genomförd av företag inom industrin. Följaktligen bör fältet aktualiseras för att reflektera dagens digitala och dynamiska affärsklimat. Därför var syftet med denna studie att utforska hur online-tjänsteföretag, som besitter stora mängder användardata, arbetar med PM, men även praktiskt illustrera hur mätetal kan designas från denna data. Studien genomfördes som en fallstudie på ett ljud-strömningsföretag, men empiri insamlades även från andra online-tjänsteföretag med avsikt att öka generaliserbarheten. Den praktiska illustrationen av mätetals-design baserades på en kvantitativ analys av pendlares audio-strömning i bil. För pendlares audio-strömning i bil fann denna studie att lämpliga mätetal bör fånga den vanemässiga aspekten associerad med pendling. Därmed anses mätetal som reflekterar engagemang lämpliga, exempelvis andelen som har sessioner både på förmiddagen och eftermiddagen och andelen som har mer än en dag med pendlar-sessioner i veckan. Gällande PM-processen hos online-tjänsteföretag bidrar denna studie med ett föreslaget ramverk som utvecklades från tre existerande ramverk; HEART som reflekteras i form av viktiga mätetalsdimensioner samt översättning av mål till mätetal, OKR vilket sätter fokus för processen i termer av mål på högre nivå, och designa-implementera-använda som reflekterar processens faser. I studien kom det fram att insikter från användardata och explicit användaråterkoppling kompletterar varandra, och att dessa kan uppkomma under hela processen. Vidare konstaterar denna studie att ömsesidig kommunikation mellan dataforskare och produktchefer är essentiellt. Dessutom identifierades fyra typer av iterationer som kan förekomma vid användning av mätetal; modifiera mätetal, designa nya mätetal, fullständigt förändra mätetal samt påbörja nya initiativ. Därutöver kan studien konstatera att mätetal är högst kontextberoende, och att det finns fyra viktiga aspekter att ta hänsyn till i mätetals-design; data-tillgänglighet och proxy-utvärdering, karaktäristik och form på mätetal, trade-off mellan mätetal, samt tolkning av mätetals-förändringar.
Salloum, Mohammed. "Towards Dynamic Performance Measurement Systems : A framework for manufacturing organisations." Licentiate thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-12312.
Повний текст джерелаNowrouzi, Ardeshir. "The quasi static and dynamic behaviour of robot near the work." Thesis, Open University, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.254765.
Повний текст джерелаKarlsson, Stefan, and Erik Hansson. "Dynamic Load Generator: Synthesising dynamic hardware load characteristics." Thesis, Mälardalens högskola, Inbyggda system, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-28280.
Повний текст джерелаBrezina, Aron Jon. "Measurement of Static and Dynamic Performance Characteristics of Electric Propulsion Systems." Wright State University / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=wright1340066274.
Повний текст джерелаVillanova, Peter Danial. "Situational constraints: their measurement and role in a dynamic model of performance." Diss., Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/49902.
Повний текст джерелаPh. D.
incomplete_metadata
Wang, Yi. "E-business assimilation and organizational dynamic capability : antecedents and consequences." HKBU Institutional Repository, 2009. http://repository.hkbu.edu.hk/etd_ra/984.
Повний текст джерелаAdduci, Michael Douglas. "Dynamic Measurement of Intraoral Pressure and Sound Pressure With Laryngoscopic Characterization During Oboe Performance." Thesis, University of North Texas, 2011. https://digital.library.unt.edu/ark:/67531/metadc103281/.
Повний текст джерелаStone, James. "The impact of supply chain performance measurement systems on dynamic behaviour in supply chains." Thesis, Aston University, 2012. http://publications.aston.ac.uk/16508/.
Повний текст джерелаMoody, Seth Sinclair. "Development of Dynamic Thermal Performance Metrics for Eco-roof Systems." PDXScholar, 2013. http://pdxscholar.library.pdx.edu/open_access_etds/666.
Повний текст джерелаBeange, Kristen. "Validation of Wearable Sensor Performance and Placement for the Evaluation of Spine Movement Quality." Thesis, Université d'Ottawa / University of Ottawa, 2019. http://hdl.handle.net/10393/38698.
Повний текст джерелаSchiller, Benjamin, Clemens Deusser, Jeronimo Castrillon, and Thorsten Strufe. "Compile- and run-time approaches for the selection of efficient data structures for dynamic graph analysis." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-214219.
Повний текст джерелаSchiller, Benjamin, Clemens Deusser, Jeronimo Castrillon, and Thorsten Strufe. "Compile- and run-time approaches for the selection of efficient data structures for dynamic graph analysis." Springer International Publishing, 2016. https://tud.qucosa.de/id/qucosa%3A29974.
Повний текст джерелаSharif, Ather Khaja. "Dynamic performance investigation of base isolated structures." Thesis, Imperial College London, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.313399.
Повний текст джерелаDavis, Ethan J. "Vehicle dynamics measurement system for evaluating older driver performance." [Gainesville, Fla.] : University of Florida, 2006. http://purl.fcla.edu/fcla/etd/UFE0014284.
Повний текст джерелаSantos, Sérgio Pereira dos. "Adding value to performance measurement by using system dynamics and multicriteria analysis." Doctoral thesis, University of Strathclyde, 2004. http://hdl.handle.net/10400.1/4503.
Повний текст джерелаMeasuring performance either formally or informally is a common practice in most organisations. It is well established that performance measurement plays a critical role in organisations, signalling how well they are succeeding in achieving their objectives and identifying where improvement efforts are required. In an attempt to respond to the assessment needs of organisations, several performance measurement frameworks have been developed over the years. However, in spite of the remarkable progress that has been made in the development of better integrated, balanced and strategically driven performance measurement frameworks, there are issues which deserve further research if these frameworks are to provide a stronger basis from which to manage effectively for improvement. Informed by the literature review and conceptual experimentation, this thesis aims to show that the use of system dynamics (SD) and multiple criteria decision analysis (MCDA), individually and in an integrated manner, can address some of these issues and bring new insights to inform and support the different stages of the performance measurement and management process. To this purpose, a framework incorporating the integrated use of SD and MCDA is suggested and its conceptual coherence and practical relevance is discussed. The conceptual coherence is illustrated by a simple but realistic application in the health care sector. The practical relevance of the framework is assessed in an organisational setting, taking the form of three in-depth case studies. Several conclusions are drawn regarding the potential role of SD and MCDA to add value to the performance measurement and management process, including an assessment of their suitability, limitations, and implementation issues associated with this particular context.
Taylor, Creed. "Measurement of Finned-Tube Heat Exchanger Performance." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/4890.
Повний текст джерелаSantos, Sergio Pereira. "Adding value to performance measurement by using system dynamics and multicriteria analysis." Thesis, University of Strathclyde, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.405473.
Повний текст джерелаBen, Said Anis. "Gestion dynamique des connaissances de maintenance pour des environnements de production de haute technologie à fort mix produit." Thesis, Université Grenoble Alpes (ComUE), 2016. http://www.theses.fr/2016GREAI017/document.
Повний текст джерелаThe constant progress in electronic technology, the short commercial life of products, and the increasing diversity of customer demand are making the semiconductor industry a production environment constrained by the continuous change of product mix and technologies. In such environment, success depends on the ability to develop and industrialize new products in required competitive time while keeping a good level of cost, yield and cycle time criteria. These criteria can be ensured by high and sustainable availability of production capacity which needs appropriate maintenance policies in terms of diagnosis, supervision, planning and operating protocols. At the start of this study, the FMEA approach (analysis of failure modes, effects and criticality) was only mobilized to capitalize the expert’s knowledge for maintenance policies management. However, the evolving nature of the industrial context requires knowledge updating at appropriate frequencies in order to adapt the operational procedures to equipment and processes behavior changes.This thesis aims to show that the knowledge update can be organized by setting up an operational methodology combine both Bayesian networks and FMEA method. In this approach, existing knowledge and know-how skills are initially capitalized in terms of cause to effect links using the FMEA method in order to prioritize maintenance actions and prevent their consequences on the equipment, the product quality and personal safety. This knowledge and expertise are then used to develop unified operating procedures for expert’s knowledge and know-how sharing. The causal links stored in the FMEA are modeled in an operational Bayesian network (BN-O), in order to enable the assessment of maintenance actions effectiveness and, hence, the relevance of existing capitalized knowledge. In an uncertain and highly variable environment, the proper execution of procedures is measured using standards maintenance performance measurement indicators (MPM). Otherwise, the accuracy of existing knowledge can be assessed as a function of the O-BN model accuracy. Any drift of these criteria leads to learning a new unsupervised Bayesian network (U-BN) to discover new causal relations from historical data. The structural difference between O-BN (built using experts judgments) and U-BN (learned from data) highlights potential new knowledge that need to be analyzed and validated by experts to modify the existing FMEA and update associated maintenance procedures.The proposed methodology has been tested in a production workshop constrained by high product mix to demonstrate its ability to dynamically renew expert knowledge and improve the efficiency of maintenance actions. This experiment led to 30% decrease in failure occurrence due to inappropriate maintenance actions. This is certifying a better quality of knowledge modeled in the tools provided by this thesis
George, Rodney Martin, and rod george@arrb com au. "Towards performance-based route selection guidelines for heavy vehicles (the dynamics of heavy vehicles over rough roads)." Swinburne University of Technology, 2003. http://adt.lib.swin.edu.au./public/adt-VSWT20060629.100558.
Повний текст джерелаAnagnostopoulos, Jason. "The integration of strategy cause mapping and system dynamics for performance measurement development and management." Thesis, University of Strathclyde, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.502316.
Повний текст джерелаTreschl, Jakub. "Analýza akcelerační a decelerační charakteristiky vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318717.
Повний текст джерелаŠteffek, Libor. "Simulace energetické náročnosti a reálné užívání budov." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-433629.
Повний текст джерелаZhang, Yitian. "STUDIES TO IMPROVE EXHAUST SYSTEM ACOUSTIC PERFORMANCE BY DETERMINATION AND ASSESSMENT OF THE SOURCE CHARACTERISTICS AND IMPEDANCE OPTIMIZATION." UKnowledge, 2016. http://uknowledge.uky.edu/me_etds/77.
Повний текст джерелаVestin, Albin, and Gustav Strandberg. "Evaluation of Target Tracking Using Multiple Sensors and Non-Causal Algorithms." Thesis, Linköpings universitet, Reglerteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-160020.
Повний текст джерелаHo, Yi-Ruei, and 何奕叡. "The Frequency of Performance Measurement affecting The Enterprise Performance—A System Dynamic Approach." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/08792391486282853823.
Повний текст джерела國立中正大學
企業管理所
97
In the recent years, Balanced Scorecard (BSC) has been popular with its performance measurement method. By this method, it can not only focuses on few key performance indicators but also by connecting the causality of its four dimensions, furthermore, it also provides the manager with a method to plan, control and implement the company’s strategy on both financial and non-financial dimension. Also, there were some researches of balanced scorecard investigating how to overcome its drawbacks such as its lack of the multi-directional causality between the performance indicators, the lack of the consideration on time delay and the lack of the validity on establishing the key performance indicators (KPI). By these researches, they make the development of balanced scorecard become more consummate. However, in reviewing it’s past defects under dynamic environment, the article finds that the past research of the BSC usually tend to focuses on the establishing process i.e. the process of strategy, objectives, measurement, stretch targets, and action plan. On the contrary, there are still few researches concerning how to select the frequency of measurement performance and the research often judges it by the rule of thumb under in static environmental condition. Therefore, in order to investigate the influence on the BSC performance by changing the frequency of the performance measurement indicators under the dynamic environment, the article, through a case study approach, firstly analyze the operation model of the case company and take an in-depth interview with the manager to co-establish the causal-loop of the company operating model. Then, we use System Dynamics (SD) as an analysis tool to simulate the change of the performance measurement frequency in order to analyses the effect of frequency on the objective performance. In this study, we hope the research of the performance measurement frequency can provide the manager with a method to inspect the regulatory mechanism behind the different effect of performance measurement frequencies on the company. On the other hand, we also want to provide a reasonable time reference for establishing a phase target when the companies try to the implement the Balanced Scorecard''s strategy.
楊儒銘. "Dynamic Performance Measurement and Real-Time Simulation of a MicroTurbojet Engine." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/81931642194841008313.
Повний текст джерела中華大學
機械與航太工程研究所
90
ABSTRACT In this stady, a micro gas turbine engine is used to formulate its dynamic response transfer function and compare with its test data to understand the development of a engine management system. The steady-state performance of the engine is studied first. The results show that the servo command to the output of fuel flow rate and engine thrust has a linear relationship between 10000rpm and 120000rpm. The design point of the engine has a compression ratio of 2.35 with a efficiency of 0.54. Second the dynamic response of the engine is examined through the Bode plot. The transfer function that best fit the test data is a first order system for rotational speed and engine thrust, a second order system for exhaust gas temperature. The rotational speed and engine thrust increas monotonically but the exhaust gas temperature shows an overshoot and a undershoot for a step change. The response of rotational speed and engine thrust are almost identical. The fitted transfer functions of the above three quantities are compared with several sets of test data and show a good agreement. Finally, several operating parameters are used to study the deviation of the engine response for a step change. Changing the fuel from 50% gasoline and 50% kerosene to pure gasoline,the rotational speed show a delay at the beginning of jump,but catches up the original system for remaining part of the jump . This could be due to the mixing rate of the pure gasoline at the early stage of fuel jump. Using 100% of kerosene, the response is slower compared to the original output. This may be due to the fuel vaporization rate is low. The inlet temperature increases from 300C to 500C the response is faster slightly. This may be due to a higher of chemical reaction rate. Changing the fuel flow pressure level from 6 kg/cm to 7 kg/cm ,the response of the step change is faster significantly. When the servo actuator changed to a slow one, the step change is delayed at the beginning of the jump. Further study of the shape of combustion chember fuel spray, and rotor inertia is necessary to understand more of the engine response.
Chen, Jun-Hao, and 陳俊豪. "A Dynamic Measurement of Operator Performance and Mental workload in Vigilance tasks." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/43375367951553416346.
Повний текст джерела國立清華大學
工業工程與工程管理學系
95
It requires a great deal of continuous attention for operator in supervisory systems. Either lacking in vigilance or information overload may lead to human errors and result in calamitous accidents. Therefore, understanding operator mental state in supervisory task is important. Diagnosis and monitoring are the major tasks of operators in vigilance state. Operator’s mental workload influences his/her performance, and furthermore, affects the system safety and operations. This study investigated the operator’s mental workload of the supervisory task. The performance and the subjective mental workload, NASA-TLX scores as well as seven physiological indexes was assessed and measured. The results indicated that vigilance performance and physiological index are related to subjective ratings, and a regression model was constructed to estimate operator’s mental workload dynamically for further enhancing supervising safety.
Lu, Yaojen, and 呂曜任. "A New Dynamic Model Of Performance Measurement On Industrial Technology Commercialization Management." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/87995962488615835451.
Повний текст джерела義守大學
管理學院管理碩博士班
100
Due to the fast development on global economic changes and recession, the management of industrial technology commercialization becomes an important issue for most business to take. According to several literature surveys, it is little relevant research has been found. In this paper we propose a new dynamic model of performance measurement on Industrial Technology Commercialization Management. In this research, we construct a performance index set, which includes four parts: customer commercialization criteria, technology commercialization management’s 12 items of key skill, four dimensions of performance measurement guidelines of Balanced Score Card and some relevant literature. Respectively, according to the six stages management process of the performance indicators requirements, we categorized the various index with Plan , Do and Check in each stage. We provide performance evaluation matrix, improve policy suggestion chart as dynamic cycle tools. In this research we also propose an algorithm with five steps, which is called as a new dynamic model of performance measurement on Industrial Technology Commercialization Management.
Chirathadam, Thomas. "Metal Mesh Foil Bearings: Prediction and Measurement for Static and Dynamic Performance Characteristics." Thesis, 2012. http://hdl.handle.net/1969.1/148301.
Повний текст джерелаHuang, Shin-Fengm, and 黃士峯. "Construction of dynamic insertion loss experiment and its application on performance measurement for silencers." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/58696387841186767922.
Повний текст джерела國立臺灣海洋大學
系統工程暨造船學系
95
The objective of this paper is to set up a set of rational experimental environments for testing the performance of silencers. The performance of several silencers can be determined by the laboratory experiment procedure. The results can be used as the control of duct noise in the industrial field. In order to confirm the exactness of an experiment environment, we have done a series of research for the properties of the airflow and sound pressure level, such as average pressure measurement in empty ducts and average sound pressure level measurement. Simultaneously, we focus on the measurements and studies of insertion loss, dynamic insertion loss, pressure drop, pressure drop coefficient, and airflow velocity. Finally, the feasibility of this laboratory has been verified via numerous experiments and analyses.
Lin, Yu-Wei, and 林育葳. "A Study of Dynamic Performance Measurement Model on Service Technology Commercialization Management and Applications." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/7mk2j5.
Повний текст джерела義守大學
管理碩博士班
103
Recently, the theory and application model of Industrial Technology Commercialization have been well published and developed, but it is few to introduce with the Management of Industrial Technology Commercialization. In general, Technologies comes from many fields, and it tries to search methods (technologies) to solve some specific problem. It is a motivation of pulling market requirement by getting technologies. The management cycles of Industrial Technology Commercialization are processed between a new technology and a new management problem. In this research, we consider the management process of a new Service- Business Technology Commercialization includes 6 stages: technology concept phase, service business design phase, first-article business running phase, business promotion/marketing phase, business formal running phase and after service phase. In the first five phases, it should pass each phase design-review. Hopefully, it will meet the customer requirements. Constructing the performance measurement indexes in this research, we consider three majors fields from literatures which are Balanced Scorecard for Quality Management, ITC (Industry Technology Commercialization) critical technologies, and Costumer, s commercialization requirement conditions. In this research, we propose a dynamic model of BIC algorithm. With several cycle operations, it provide service- business to get a prototype performance measurement index set and a continuous improvement result of performance measurement index set. We also provide numerical examples to verify the validity of this model.
Liao, Yu-Wen, and 廖郁雯. "Using System Dynamic Concept to Research the Performance Measurement System in the Teaching Hospital." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/25467913430224745573.
Повний текст джерела逢甲大學
會計所
96
Abstract The new era of National Health Insurance has impacted the management of the hospitals significantly. The medical organization has faced the competition pressure which is different from the past, not only management profit is compressed but also the medical institutional framework is impacted. In order to match the changes of environment, so the medical institute manager must have the core systematic ability to measure itself and generate various management strategy to reach the better management performance. This research finds out the 14 key indicators of Balance score card through the documents and practices and will use the Causal Relationship via the concept of the systematic dynamics to develop the performance measurement system in teaching hospital by reinforcing, balancing and delaying time in the various feedback loops. Use the systematic dynamic concept modeling course to show up those factors such as various kinds of policy, interactive relationships an d time delay etc. which will influence the growth and stability in the physical structure of hospital system. With global thinking system to clearly see the interactive structure in events and to offer better management policy to reach the goal of the continuous improvement management performance. By Observing and analyzing the influence in the management performance of teaching hospital vs strategy policy, action scheme to understand the Causal Relationship within the system; under the discovery of the research, the case hospital can improve medical quality by investing in training and growing up to elevate medical quality, customer satisfaction, market share and reach the desirable value goal of the project of case hospital. It can be very easy to make corresponding strategy action plan with systematic dynamic concept to research performance measurement system. The strategy action making by the hospital can be widely and flexibly used because the system is analyzed and measured with the comprehensive and global viewpoint. Therefore, the administrator or the manager can refer to this system and ponder over the competitive strategy of the hospital, through building constructing simulation analysis to find the key factor influencing the system, then improve systematic performance and management scheme and to reach the continuous management goal of the hospital. Keywords:System Dynamic Concept、Performance Measurement、Strategy、Balanced Scorecard,(BSC)
Lee, Cheng-Ying, and 李政穎. "A Study on the Verification of Measurement Model and Relationship between the Change Leadership, Dynamic Capabilities and School Performance." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/8x44tk.
Повний текст джерела國立臺中教育大學
教育學系
107
This study refers to the study of the change leadership, dynamic capabilities and school performance measurement model verification and relationship of the primary school principals. Among them, the dynamic capabilities are used as the research intermediary variable to find out the dynamic capabilities in the principal change leadership and school performance relationship. This study adopts the investigation and research method. Taking the teachers of Taiwan's public primary schools as the research object, a stratified random sampling method is adopted, and a total of 681 teachers' effective questionnaires are obtained. After effectively recovering the questionnaire, the SPSS statistical software package is used for project analysis, factor analysis and reliability analysis. Then, the AMOS statistical software is used to analyze the structural equation path relationship between the variables and the hypothesis verification, and the Bootstrap estimation technique is applied to calculate. The significant level of mediation effect is to understand the mediating effect of dynamic ability in the relationship between principal change and school performance. The study found that 1. Primary school principals change leadership, dynamic capabilities and school performance are in good condition; 2. Primary school principals have a good measurement model for change leadership, dynamic capabilities and school performance; 3. There is a positive impact between primary school principals change leadership, dynamic capabilities and school performance; 4. Dynamic capabilities have a mediating effect on the relationship between school performance and school principals change leadership. Finally, based on the results of the study, conclusions and recommendations are provided for reference by schools and future research.
(9690776), Bing Li. "EXAMINATION OF LITHIUM-ION BATTERY PERFORMANCE DEGRADATION UNDER DYNAMIC ENVIRONMENT AND EARLY DETECTION OF THERMAL RUNAWAY WITH INTERNAL SENSOR MEASUREMENT." Thesis, 2020.
Знайти повний текст джерелаChen, Jia, and 陳佳. "A study of using the viewpoint of Dynamic Balanced Scorecard to establish the performance measurement indicators for the service area of highway--the case study of HuKou service area." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/49251398043197136181.
Повний текст джерела淡江大學
會計學系碩士在職專班
95
The most advantageous tendering is for the purpose of private sector’s participation in service area of highway tried to use the efficiency operation of the private sectors to increase the managing performance. But different department and managers see performance from different point of view. It is a research of using the viewpoint of Dynamic Balanced Scorecard to establish the performance measurement indicators for the case study of company in service area of highway, providing concrete performance evaluation and data, and connecting with every performance measurement indicators , and accumulating the data materials according to it .It could provide reference resources of performance measurement indicators for service area of highway. It is different from avoiding to connect with performance measurement indicators each other in the past, and to display completely the content of perspectives. From interviews with experts and the analysis from question-and-answer, the four major evaluation perspectives are as follows: First, employee satisfaction, investment in information system and point on sales are measured in learning and growth perspective. Second, technical skill such as the ability of purchasing and originality skill such as the ability of planning marketing are measured in internal process perspective. Third, the quality of goods and services are measured by customer perspective. Finally, revenue and cost and net income and cash flow are measured by financial perspective. These major indexes can explain the relationship between their causes and result , demonstrate the internal operation and the operation result of the target case. The information is useful for business to locate and diagnose problems after the performance evaluation. It can analysis the dispute questions between of the management department and financial department, through the appearing of causal loop pictures, It could provide appropriately the suggestions for the different departments. And it could provide the concrete comment of performance evaluation of managing and financial department to find out the explanation from them.
Shih, Chaun-wen, and 施朝文. "The Study of LPG Engine Dynamic Model and Performance Measurements." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/94442072625892229618.
Повний текст джерела國立中興大學
機械工程學系
87
To use Liquid Petroleum Gas (LPG) as an alternative fuel is a excellent method to wildly utilize the world energy source.As the LPG vehicles have lower emissions than the gasoline vehicles,people who care about environment are concerned on this characteristic.This paper presents three major parts:The first is the discussions of the effects of LPG engine performance and emission.According to the results of our experiments,the throttle size of mixer strongly influences the engine performance.Based on the prosperity mixer,the LPG engine presents 6~7﹪power less than the gasoline engine power,Air-to-Fuel ratio strongly effects the emission,the total hydrocarbon and total OFP of the LPG emission is less than that of gasoline.Otherwise ,it is necessary to have an early spark angle on LPG engine,but the more early angle will cause the difficulty of engine start. The second part is concerned on the HC components of the LPG emission,according to our analysis of emission samples,unburned LPG is an important part of the LPG HC emission.Using carbon numbers to compare with gosoline emission,we find that gosoline HC components distribute widely,but LPG emission components focus on low carbon number components.Ethylene and Propene present the major parts of the emission Ozone forming potential . The third part is establishing the model of LPG engine fuel system,and compare with the real engine state.We find that fuel system has almost no effect on LPG system characteristics,A/F total delay is caused by the mixture manifold delay and the intake manifold delay.
Fang, Chia-Ti, and 方佳娣. "Using System Dynamics Approach to Construct a Performance Measurement Model for Supply Chain Management." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/97797234558463928362.
Повний текст джерела淡江大學
資訊管理學系
89
By definition, Supply Chain Management (SCM) represents a systematic effort to provide integrated management to the Supply Value Chain to meet customer needs and expectations, from suppliers of raw material through manufacturing and on to end customers.” Yet to evaluate the behavior of a SCM system, a credible performance measurement model is apparently significant. This research uses System Dynamics approach to construct a real model for the performance measurement of SCM. By analyzing the interactions between elements within the performance measurement system, it can be helpful to clarify the structure and the dynamic nature of Supply chain management. Along with model construction, scenario analysis throughout this SCM performance measurement system is implemented with a view to make system modeling complete and constructive. Refer to the simulation results obtained from the model, complicated managerial policy decisions such as demand planning, quality control and marketing related decisions can be estimated and resolved. This study uses a practical case of pharmacy industry supply chain to proof the effectiveness and reliability of this model.
Yang, Qi William. "Applying Qualitative System Dynamics to Enhance Performance Measurement for a Sustainable Health System in British Columbia." Thesis, 2015. http://hdl.handle.net/1828/6566.
Повний текст джерелаGraduate
0769
0790
qi.william.yang@gmail.com
Melbi, Alexander. "Measuring a Platoon Commander's Performance in a Complex, Dynamic and Information Rich Environment." Thesis, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-177203.
Повний текст джерелаZolezzi, Stefano Alberto. "The effectiveness of dynamic assessment as an alternative aptitude testing strategy." Thesis, 1995. http://hdl.handle.net/10500/17878.
Повний текст джерелаPsychology of Education
D. Ed. (Psychology of Education)
Kassie, Mulugeta Gebre-Medhin, and Mulugeta Gebre-Medhin Kassie. "Market orientation and business performance : an empirical study of the banking sector in Ethiopia." Thesis, 2015. http://hdl.handle.net/10500/19157.
Повний текст джерелаBusiness Management
D.B.L.
Kassie, Mulugeta Gebre-Medhin. "Market orientation and business performance : an empirical study of the banking sector in Ethiopia." Thesis, 2015. http://hdl.handle.net/10500/19157.
Повний текст джерелаBusiness Management
D.B.L.