Добірка наукової літератури з теми "Dry cleaning Energy consumption"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Dry cleaning Energy consumption".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Dry cleaning Energy consumption"
Dahlioui, Dounia, Fayrouz El Hamdani, Abdelali Djdiaa, Teodoro Martínez López, and Hicham Bouzekri. "Assessment of dry and wet cleaning of aluminum mirrors toward water consumption reduction." Renewable Energy 205 (March 2023): 248–55. http://dx.doi.org/10.1016/j.renene.2023.01.086.
Повний текст джерелаAriyawansha, Thilanka, Dimuthu Abeyrathna, Buddhika Kulasekara, Devananda Pottawela, Dinesh Kodithuwakku, Sandya Ariyawansha, Natasha Sewwandi, WBMAC Bandara, Tofael Ahamed, and Ryozo Noguchi. "A Novel Approach to Minimize Energy Requirements and Maximize Biomass Utilization of the Sugarcane Harvesting System in Sri Lanka." Energies 13, no. 6 (March 22, 2020): 1497. http://dx.doi.org/10.3390/en13061497.
Повний текст джерелаFiaschi, Daniele, and Lorenzo Talluri. "Assessment of the thermoelectric conversion potential of low-temperature waste heat from textile dry-cleaning processes." E3S Web of Conferences 113 (2019): 03019. http://dx.doi.org/10.1051/e3sconf/201911303019.
Повний текст джерелаZhang, Fu Ming. "Research and Practice on BF Gas Dry Type Dedusting Technology at Contemporary Blast Furnace." Advanced Materials Research 610-613 (December 2012): 2134–37. http://dx.doi.org/10.4028/www.scientific.net/amr.610-613.2134.
Повний текст джерелаWahab, Hamdani. "Analysis of Energy and Exergoeconomic on Water Cleaning and Injection Facilities in the CPP Block, Indonesia." Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse) 66, no. 2 (July 30, 2022): 41–49. http://dx.doi.org/10.36842/jomase.v66i2.285.
Повний текст джерелаLukyanov, Alexander V., Stanislav M. Orlov, and Boris R. Romanenko. "Study of the characteristics of the ascending vortex of the cyclone and the concentration of dust along its section." Vestnik MGSU, no. 8 (August 2021): 1034–44. http://dx.doi.org/10.22227/1997-0935.2021.8.1034-1044.
Повний текст джерелаKrumme, U., H. Keuthen, U. Saint-Paul, and W. Villwock. "Contribution to the feeding ecology of the banded puffer fish Colomesus psittacus (Tetraodontidae) in north Brazilian mangrove creeks." Brazilian Journal of Biology 67, no. 3 (August 2007): 383–92. http://dx.doi.org/10.1590/s1519-69842007000300002.
Повний текст джерелаHaidar, Zeyad A., Mamdooh Al-Saud, Jamel Orfi, and Hany Al-Ansary. "Reverse Osmosis Desalination Plants Energy Consumption Management and Optimization for Improving Power Systems Voltage Stability with PV Generation Resources." Energies 14, no. 22 (November 18, 2021): 7739. http://dx.doi.org/10.3390/en14227739.
Повний текст джерелаShaikh, Mohd Bilal Naim, and Mohammed Ali. "Turning of steels under various cooling and lubrication techniques: a review of literature, sustainability aspects, and future scope." Engineering Research Express 3, no. 4 (November 17, 2021): 042001. http://dx.doi.org/10.1088/2631-8695/ac2e10.
Повний текст джерелаPereira, Gislaine Silva, and Eduardo David. "AVALIAÇÃO DE PARÂMETROS ENERGÉTICOS EM ESTÁBULO LEITEIRO NO NOROESTE DO PARANÁ." ENERGIA NA AGRICULTURA 32, no. 3 (December 20, 2017): 237. http://dx.doi.org/10.17224/energagric.2017v32n3p237-242.
Повний текст джерелаДисертації з теми "Dry cleaning Energy consumption"
Sodagar, Behzad. "An investigation into the thermal performance of housing in the hot dry climate of Iran." Thesis, University of Newcastle Upon Tyne, 1991. http://hdl.handle.net/10443/288.
Повний текст джерелаHamdy, I. F. "Architectural approach to the energy performance of buildings in a hot-dry climate with special reference to Egypt." Thesis, University of Bath, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373396.
Повний текст джерелаMousli, Kindah <1982>. "Optimize Natural Ventilation and Thermal Mass in Residential Buildings to Achieve Thermal Comfort and Reduction of Energy Consumption in Hot Dry Climate." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amsdottorato.unibo.it/7469/.
Повний текст джерелаKarinkanta, P. (Pasi). "Dry fine grinding of Norway spruce (Picea abies) wood in impact-based fine grinding mills." Doctoral thesis, Oulun yliopisto, 2015. http://urn.fi/urn:isbn:9789526207193.
Повний текст джерелаTiivistelmä Puujauheita käytetään laajalti erilaisissa sovelluksissa, kuten esimerkiksi biokomposiiteissa ja suodattimissa. Tämän lisäksi on olemassa paljon tutkimustietoa siitä, kuinka puujauheita voitaisiin hyödyntää laajemminkin. Puu voidaan mekaanisesti prosessoida alle 100 µm:n kokoluokkaan, mutta yksityiskohtaista tietoa kuivahienojauhatuksen olosuhteiden vaikutuksesta jauheiden morfologiaan ja selluloosan kiteisyyteen ei ole saatavilla. Puujauheen morfologialla ja selluloosan kiteisyydellä on kuitenkin merkittävä vaikutus sovelluksia ja jatkojalostusta ajatellen. Puun kuivahienojauhatuksen tiedon puute hankaloittaa merkittävästi prosessin suunnittelua ja optimointia erilaisia sovelluksia varten. Tämän väitöskirjan tavoitteena on selvittää iskuihin perustuvien hienojauhimien vaikutukset puun ominaisuuksiin ja tutkia mekaanisen prosessoinnin energiatehokkuutta hienojauhatuksessa. Tutkimuksessa selvitettiin kolmen erilaisen iskuun perustuvan hienojauhatusmyllyn pääasiallisten operointiparametrien vaikutusta kuivatun metsäkuusen ominaisuuksiin ja energiankulutukseen. Jokaisella hienojauhimella onnistuttiin tuottamaan puujauhoja, joiden mediaanikoko oli alle 25 µm. Iskuihin perustuvalla jauhinkappalemyllyllä saatiin tuotettua puujauhoa, jonka selluloosan kiteisyys on alhaisempi ja partikkelimuodot pyöreämpiä verrattuna samankokoisiin puujauhoihin, jotka on tuotettu iskuihin perustuvilla jauhinkappaleettomilla hienojauhatusmyllyillä. Työssä saatiin käytännöllinen arvio kuivatun metsäkuusen hienojauhatuksen minimienergiankulutukselle iskuihin perustuville jauhinkappalemyllyille, mitä voidaan käyttää kyseisten myllytyyppien optimoinnin tavoitteena. Työssä havaittiin lisäksi, että kryogeenisiä jauhatusolosuhteita käyttämällä voidaan tuottaa erilaisia puujauhoja verrattuna puujauhoihin, jotka prosessoidaan ilman nestetyppijäädytystä, kun jauhatus suoritetaan iskuihin perustuvalla jauhinkappalemyllyllä. Ilman nestetyppijäädytystä puun kosteuspitoisuudella on merkittävämpi vaikutus puujauhojen ominaisuuksiin kuin kryogeenisissä olosuhteissa jauhetuilla. Kryogeenisillä jauhatusolosuhteilla voidaan parantaa myös jauhatuksen energiatehokkuutta. Torrefioinnilla voidaan vähentää hienojauhatuksen energiankulutusta iskuihin perustuvilla jauhinkappalemyllyillä, kun tavoitekoon mediaani on yli 17,4 µm (± 0,2 µm). Torrefioinnilla ei ole vaikutusta selluloosan kiteisyyteen tai partikkeleiden muotoon energiankulutuksen funktiona
Krejčí, Tomáš. "Středotonážní spalovna odpadů - systém čištění spalin." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231797.
Повний текст джерелаChi-liangTsai and 蔡啓良. "Analysis and improvement of energy consumption of high pressure dry air system by systems approach." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/257n4y.
Повний текст джерела國立中央大學
環境工程研究所在職專班
107
High-pressure dry air is widely used in automation equipment today and in the future due to the safety, cleanliness, easy control, and easy access of pneumatic equipment。 Almost every plant has to be configured, but the cost of compressed air production is extremely expensive。 Therefore, how to effectively operate and control and save energy waste of compressed air is an important issue that plant managers must face。 In order to reduce the energy consumption of the compressed dry air system, it is necessary to systematically analyze the system, analyze its internal and external to find the energy consumption link, and further develop energy-saving measures for each energy-consuming link, aiming at reducing the compressed dry air system。 At present, there is no relevant research and practical case to propose a systematic and accurate countermeasure for reducing energy consumption。 Because energy consumption is related to internal and external mechanisms of action and methods of use, it is more reasonable to use internal and external systems。 The mechanism of action is to identify the key energy consumption causes and formulate countermeasures to perform improvement and verification。 This study improved the continuous improvement and verification of the second phase of the CDA (Compressed Dry Air) system for an IC substrate。 The improvement results of this study did meet the research objectives。 The first phase improved the pipeline leakage (deducting the air volume used)。 The factors of change totaled a 8.1% reduction in energy consumption, a reduction in electricity consumption of 27,201 kWh/month, and a reduction in operating costs of NT$68,000/month。 In the second stage, a zero air loss dryer was added。 Under the condition of stable gas pressure and steady air volume, the systems power consumption was significantly reduced。 (The deducting the air volume change factor reduced the energy consumption ratio by 20.9%, and reduced the power consumption by about 46,943 kWh/month, reduced operating costs of 117,000 NTD / month)。 Therefore, it can be confirmed that the system method is used as a feasible method for analyzing the energy consumption and improvement of the compressed dry air supply system。 In the same way, it is also a feasible and effective way to use the systems approach as the energy supply analysis and improvement of other facility supply systems (such as the central chiller water system and the clean room system)。 It is expected that this research result can be used for future research and discussion。 The system energy consumption analysis and improvement reference, in order to achieve energy-saving emission reduction and enterprises to reduce production costs for a win-win purpose。
Книги з теми "Dry cleaning Energy consumption"
Office, Energy Efficiency. Energy efficiency in the dry-cleaning industry. London: Energy Efficiency Office, 1993.
Знайти повний текст джерелаLstiburek, Joseph W. Builder's guide: Hot-dry & mixed-dry climates. Westford, MA: Building Science Corporation, 2000.
Знайти повний текст джерелаSolvent consumption in dry-cleaning. [U.K.]: Environmental Technology Best Practice Programme, 1997.
Знайти повний текст джерелаGreat Britain. Energy Efficiency Office., Harwell Laboratory. Energy Technology Support Unit., and Fabric Care Research Association, eds. Energy conservation in the dry-cleaning industry. Harwell: ETSU, 1993.
Знайти повний текст джерелаBenchmarking energy use and costs in salt-and-dry fish processing and lobster processing. [Ottawa]: CIPEC, Natural Resources Canada, 2005.
Знайти повний текст джерелаRunning Dry: Essays on Energy, Water, and Environmental Crisis. Rutgers University Press, 2015.
Знайти повний текст джерелаUnited States. Dept. of Energy. Building Technology, State and Community Programs., National Renewable Energy Laboratory (U.S.), and Innovative Design, eds. Energy design guidelines for high performance schools: Cool and dry climates. [Washington, D.C: Office of Building Technology, State and Community Programs, Energy Efficiency and Renewable Energy, U.S. Dept. of Energy, 2002.
Знайти повний текст джерелаEnergy design guidelines for high performance schools: Hot and dry climates. [Washington, D.C: Office of Building Technology, State and Community Programs, Energy Efficiency and Renewable Energy, U.S. Dept. of Energy, 2002.
Знайти повний текст джерелаЧастини книг з теми "Dry cleaning Energy consumption"
Adak, Deepanjana, Silajit Manna, Shoubhik De, Manish Kumar, Santanu Maity, and Raghunath Bhattacharyya. "Mitigation of Soiling of Solar Panels by Applying Superydrophobic Aluminum Oxide Thin Film and Dry Cleaning by Electrodynamic Screen." In Springer Proceedings in Energy, 69–79. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-9280-2_9.
Повний текст джерелаKessler, H. G. "Multistage Evaporation and Water Vapour Recompression with Special Emphasis on High Dry Matter Content, Product Losses, Cleaning and Energy Savings." In Milk, 545–58. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-017-5571-9_63.
Повний текст джерелаBhandari, Nikhil, and A. Meenatchi Sundaram. "Optimization of Windows for Daylighting and Energy Consumption for South Facade in Office Building in Hot and Dry Climate of India." In Smart Innovation, Systems and Technologies, 307–20. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-5974-3_27.
Повний текст джерелаJavanmard, Zinat, and Consuelo Nava. "Investigating the Effect of Form and Material of Spatial Structures on Energy Consumption in Hot and Dry Climates Case Study: Kerman City." In Lecture Notes in Networks and Systems, 1631–42. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-06825-6_157.
Повний текст джерелаOkike, Iheanacho, Seerp Wigboldus, Anandan Samireddipalle, Diego Naziri, Akin O. K. Adesehinwa, Victor Attah Adejoh, Tunde Amole, Sunil Bordoloi, and Peter Kulakow. "Turning Waste to Wealth: Harnessing the Potential of Cassava Peels for Nutritious Animal Feed." In Root, Tuber and Banana Food System Innovations, 173–206. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92022-7_6.
Повний текст джерела"coating layer itself, an d at the interface between the coating and the substrate, causes instant fracturing and separation of coating material from the surface. In general, if a coating or contaminant is CHEMICALLY bonded to a surface, dry ice particle blasting will NOT effectively remove the coating. If the bond is PHYSICAL o r MECHANICAL in nature, such as a coating of rubber residue which is "anchored" into the porous surface of an aluminum casting, then there is a good chance that dr y ice blasting will work. Contaminants which are etched, or stained into the surfaces of metals, ceramics, plastics, or other materials typically cannot be removed with dry ice blasting. If the surface of the substrate is extremely porous or rough, providing strong mechanical "anchoring" for the contaminant or coating, dr y ice blasting may not be able to remove all of the coating, or the rate of removal may be too slow to allow dry ice blasting to be cost effective. The classic example of a contaminant that does NOT respond to dry ice blast-ing is RUST. Rust is both chemically and strongly mechanically bonded to steel substrate. Advanced stages of rust must be "chiseled" away with abrasive sand blasting. Only the thin film of powderized "flash" rust on a fresh steel surface can be effectively removed with dry ice blasting. 4.2.1.1. Inductio n (venturi) and direct acceleration blast systems - the effect of the typ e of system on available kinetic energy In a two-hose induction (venturi) carbon dioxide blastin g system, the medium particles are moved from the hopper to the "gun" chamber by suction, where they drop to a very low velocity before being induced into the outflow of the nozzle by a large flow volume of compressed air. Some more advanced two-hose systems employ a small positive pressure to the pellet delivery hose. In any type of two-hose system, since the blast medium particles have only a short distance in which to gain momentum and accelerate to the nozzle exit (usually only 200 to 300 mm), the final particle average velocity is limited to between 60 and 120 meters per second. So, in general, two-hose systems, although not so costly, are limited in their ability to deliver contaminant removal kinetic energy to the surface to be cleaned. When more blasting energy is required, these systems must be "boosted" a t the expense of much more air volume required, and higher blast pressure is re-quired as well, with much more nozzle back thrust, and very much more blast noise generated at the nozzle exit plane. The other type of solid carbon dioxide medium blasting system is like the "pressurized pot" abrasive blasting system common in the sand blasting and Plas-ti c Media Blasting industries. These systems use a single delivery hose from the hopper to the "nozzle" applicator in which both the medium particles and the compressed air travel. These systems are more complex and a little more costly than the inductive two-hose systems, but the advantages gained greatly outweigh the extra initial expense. In a single-hose solid carbon dioxide particle blasting system, sometimes referred to as a "direct acceleration " system, the medium is introduced from the hopper into a single, pre-pressurized blast hose through a sealed airlock feeder. The particles begin their acceleration and velocity increase." In Surface Contamination and Cleaning, 162–63. CRC Press, 2003. http://dx.doi.org/10.1201/9789047403289-25.
Повний текст джерелаHrideek, T. K., and K. U. K. Nampoothiri. "Millets as an Integral Part of Nutritional Diet in India." In Examining the Development, Regulation, and Consumption of Functional Foods, 83–108. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-0607-2.ch004.
Повний текст джерела"CONCLUSION While cleaned silica-based glass surfaces have similar surface compositions, their susceptibility to strongly adsorbing organic contaminant s depends strongly on the glass composition and the cleaning procedure. For the three glass species exam-ined: silica, aluminoborosilicate, and sodalime glass , the glass surfaces behave similarly after chromic acid cleaning. They show significant differences in their properties followin g a dry cleaning procedure, such as pyrolysis or UV/ozone cleaning. The cleaned silica surfaces show a high susceptibility to adsorbing or-ganic contamination following pyrolysis cleaning, while the pyrolyzed sodalime glass appears to be virtually immune to strongly adsorbing organic molecules. Py-rolyzed aluminoborosilicate glass shows an intermediate susceptibility to adsorb-ing organic contaminants. The chromic acid cleaned glass surfaces all show an in-termediate susceptibility to contamination by adsorbed organic molecules. Thus, it may be an oversimplification to consider a clean glass surface as a high energy substrate that is bound to attract ambient organic contamination. The wettability behavior of the cleaned glass surfaces showed features associ-ated with their exposed chemical functions. The non-dispersive interaction energy between glass and water as a function of pH showed evidence of charging of the surface silanol groups. The point of zero charge for these surface chemical func-tions was observed at pH 3. An estimate of the non-dispersive interaction energy between glass and water at the point of zero charge enables a reasonable estima-tion of the density of surface silanol groups on the cleaned glass. The trends ob-served for the surface charge as a function of pH correlate with the observed sus-ceptibility for adsorbing organic contamination to the cleaned glass surfaces. Charge-adsorbed surfactant monolayers indicated a negative surface charge on the cleaned glass, as expected for silica-based glass surfaces at neutral pH. The wettability of grafted self-assembled octadecylsilane monolayers indicated high quality coatings on the cleaned glass surfaces. The coating quality was identical for all three glass species following chromic acid cleaning. The UV/ozone cleaned glass surfaces showed the highest coating quality on the silica surface, followed by the aluminoborosilicate surface and the sodalime glass surface. The trends in coating quality for all chromic acid cleaned surfaces and UV/ozone cleaned surfaces correlate with those seen for susceptibility to organic contamina-tion of the cleaned glass surfaces exposed to unpurified liquid octane. REFERENCES." In Surface Contamination and Cleaning, 114–16. CRC Press, 2003. http://dx.doi.org/10.1201/9789047403289-17.
Повний текст джерелаŻołnierczyk, Anna K. "Nutritional Properties of Edible Insects." In Environmental, Health, and Business Opportunities in the New Meat Alternatives Market, 143–65. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-7350-0.ch008.
Повний текст джерелаŻołnierczyk, Anna K. "Nutritional Properties of Edible Insects." In Research Anthology on Food Waste Reduction and Alternative Diets for Food and Nutrition Security, 1187–209. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-5354-1.ch061.
Повний текст джерелаТези доповідей конференцій з теми "Dry cleaning Energy consumption"
Herrlander, Bo. "Novel Gas Cleaning With Integrated Energy Recovery." In 19th Annual North American Waste-to-Energy Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/nawtec19-5415.
Повний текст джерелаMargraf, Ruediger. "Conditioning Rotor–Recycle Process With Particle Conditioning: A Simple and Effective Process for the Gas Cleaning Downstream Waste Incinerators." In 18th Annual North American Waste-to-Energy Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/nawtec18-3556.
Повний текст джерелаLiu, Erlin, and Zhaoxu Hua. "Research on Optimization Method of Cleaning Parameters of Insulator Dry Ice Cleaning Robot." In 2021 IEEE 5th Conference on Energy Internet and Energy System Integration (EI2). IEEE, 2021. http://dx.doi.org/10.1109/ei252483.2021.9712898.
Повний текст джерелаAly, Shahzada Pamir, Palanichamy Gandhidasan, Nicolas Barth, and Said Ahzi. "Novel dry cleaning machine for photovoltaic and solar panels." In 2015 3rd International Renewable and Sustainable Energy Conference (IRSEC). IEEE, 2015. http://dx.doi.org/10.1109/irsec.2015.7455112.
Повний текст джерелаKhalil, Ibrahim, Aaron Sahm, and Robert Boehm. "Wet or Dry Cooling?" In ASME 2006 International Solar Energy Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/isec2006-99082.
Повний текст джерелаIslam, S. Z., Z. A. Athira, M. Noor, M. S. Kamarudin, and J. Uddin. "Time-based dry cleaning brush controller for PV energy yield enhancement." In 11th International Conference on Renewable Power Generation - Meeting net zero carbon (RPG 2022). Institution of Engineering and Technology, 2022. http://dx.doi.org/10.1049/icp.2022.1685.
Повний текст джерелаZhang, Yun-Yi, Zhen-Zhong Hu, Jia-Rui Lin, and Jian-Ping Zhang. "Data Cleaning for Prediction and its Evaluation of Building Energy Consumption." In 38th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction (IAARC), 2021. http://dx.doi.org/10.22260/isarc2021/0059.
Повний текст джерелаRohani, Shahab, Nada Abdelnabi, Thomas Fluri, Anna Heimsath, Christof Wittwer, and Javier García Pérez Ainsua. "Optimized mirror cleaning strategies in PTC plants reducing the water consumption and the levelized cost of cleaning." In SOLARPACES 2018: International Conference on Concentrating Solar Power and Chemical Energy Systems. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5117763.
Повний текст джерелаJurj, D. I., A. Polycarpou, L. Czumbil, A. G. Berciu, M. Lancrajan, D. Barar, and D. D. Micu. "EXTENDED ANALYSIS OF DATA CLEANING FOR ELECTRICAL ENERGY CONSUMPTION DATA OF PUBLIC BUILDINGS." In The 12th Mediterranean Conference on Power Generation, Transmission, Distribution and Energy Conversion (MEDPOWER 2020). Institution of Engineering and Technology, 2021. http://dx.doi.org/10.1049/icp.2021.1237.
Повний текст джерелаJurj, Dacian I., Dan D. Micu, Levente Czumbil, Alexandru G. Berciu, Mircea Lancrajan, and Denisa M. Barar. "Analysis of Data Cleaning Techniques for Electrical Energy Consumption of a Public Building." In 2020 55th International Universities Power Engineering Conference (UPEC). IEEE, 2020. http://dx.doi.org/10.1109/upec49904.2020.9209781.
Повний текст джерелаЗвіти організацій з теми "Dry cleaning Energy consumption"
Sela, Shlomo, and Michael McClelland. Desiccation Tolerance in Salmonella and its Implications. United States Department of Agriculture, May 2013. http://dx.doi.org/10.32747/2013.7594389.bard.
Повний текст джерелаEneroth, Hanna, Hanna Karlsson Potter, and Elin Röös. Environmental impact of coffee, tea and cocoa – data collection for a consumer guide for plant-based foods. Department of Energy and Technology, Swedish University of Agricultural Sciences, 2022. http://dx.doi.org/10.54612/a.2n3m2d2pjl.
Повний текст джерелаMonetary Policy Report - April 2022. Banco de la República, June 2022. http://dx.doi.org/10.32468/inf-pol-mont-eng.tr2-2022.
Повний текст джерела