Статті в журналах з теми "Distributed recycling"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Distributed recycling".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Kreiger, M., G. C. Anzalone, M. L. Mulder, A. Glover, and J. M. Pearce. "Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas." MRS Proceedings 1492 (2013): 91–96. http://dx.doi.org/10.1557/opl.2013.258.
Xiao, Y., and M. A. Reuter. "Recycling of distributed aluminium turning scrap." Minerals Engineering 15, no. 11 (November 2002): 963–70. http://dx.doi.org/10.1016/s0892-6875(02)00137-1.
Ng‐Molina, Francisco Y., Teresa M. Martín‐Guerrero, and Carlos Camacho‐Peñalosa. "Power recycling concept applied to distributed amplification." IET Microwaves, Antennas & Propagation 7, no. 15 (December 2013): 1207–14. http://dx.doi.org/10.1049/iet-map.2013.0160.
Kassab, Ali, Dawood Al Nabhani, Pravansu Mohanty, Christopher Pannier, and Georges Y. Ayoub. "Advancing Plastic Recycling: Challenges and Opportunities in the Integration of 3D Printing and Distributed Recycling for a Circular Economy." Polymers 15, no. 19 (September 25, 2023): 3881. http://dx.doi.org/10.3390/polym15193881.
Baechler, Christian, Matthew DeVuono, and Joshua M. Pearce. "Distributed recycling of waste polymer into RepRap feedstock." Rapid Prototyping Journal 19, no. 2 (March 1, 2013): 118–25. http://dx.doi.org/10.1108/13552541311302978.
Ziouzios, Dimitris, Dimitris Tsiktsiris, Nikolaos Baras, and Minas Dasygenis. "A Distributed Architecture for Smart Recycling Using Machine Learning." Future Internet 12, no. 9 (August 24, 2020): 141. http://dx.doi.org/10.3390/fi12090141.
Huang, You Heng, and Qi Hong Wei. "Distribution Mode of Urban Renewable Resources Recycling Based on the Internet." Advanced Materials Research 616-618 (December 2012): 1636–39. http://dx.doi.org/10.4028/www.scientific.net/amr.616-618.1636.
Dertinger, Samantha C., Nicole Gallup, Nagendra G. Tanikella, Marzio Grasso, Samireh Vahid, Peter J. S. Foot, and Joshua M. Pearce. "Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades." Resources, Conservation and Recycling 157 (June 2020): 104810. http://dx.doi.org/10.1016/j.resconrec.2020.104810.
Little, Helen A., Nagendra G. Tanikella, Matthew J. Reich, Matthew J. Fiedler, Samantha L. Snabes, and Joshua M. Pearce. "Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks." Materials 13, no. 19 (September 25, 2020): 4273. http://dx.doi.org/10.3390/ma13194273.
Sadowski, Przemysław. "Quantum distance-based classifier with distributed knowledge and state recycling." International Journal of Quantum Information 16, no. 08 (December 2018): 1840013. http://dx.doi.org/10.1142/s0219749918400130.
Hunt, Emily J., Chenlong Zhang, Nick Anzalone, and Joshua M. Pearce. "Polymer recycling codes for distributed manufacturing with 3-D printers." Resources, Conservation and Recycling 97 (April 2015): 24–30. http://dx.doi.org/10.1016/j.resconrec.2015.02.004.
Hopkins, C. R., A. Gibson, M. Shipman, D. K. Strickland, and I. S. Trowbridge. "In migrating fibroblasts, recycling receptors are concentrated in narrow tubules in the pericentriolar area, and then routed to the plasma membrane of the leading lamella." Journal of Cell Biology 125, no. 6 (June 15, 1994): 1265–74. http://dx.doi.org/10.1083/jcb.125.6.1265.
Zhou, Ling Yun, and Qing Zhang. "Research on the Recycling Logistics Network Design of Renewable Resources in China." Advanced Materials Research 573-574 (October 2012): 992–95. http://dx.doi.org/10.4028/www.scientific.net/amr.573-574.992.
Ravindran, Arvind, Sean Scsavnicki, Walker Nelson, Peter Gorecki, Jacob Franz, Shane Oberloier, Theresa K. Meyer, Andrew R. Barnard, and Joshua M. Pearce. "Open Source Waste Plastic Granulator." Technologies 7, no. 4 (October 14, 2019): 74. http://dx.doi.org/10.3390/technologies7040074.
Lafourcade, Céline, Jean-Marc Galan, and Matthias Peter. "Opposite Roles of the F-Box Protein Rcy1p and the GTPase-Activating Protein Gyp2p During Recycling of Internalized Proteins in Yeast." Genetics 164, no. 2 (June 1, 2003): 469–77. http://dx.doi.org/10.1093/genetics/164.2.469.
Hara, Yuji, Takashi Furutani, Akinobu Murakami, Armando M. Palijon, and Makoto Yokohari. "Current organic waste recycling and the potential for local recycling through urban agriculture in Metro Manila." Waste Management & Research: The Journal for a Sustainable Circular Economy 29, no. 11 (October 15, 2010): 1213–21. http://dx.doi.org/10.1177/0734242x10386638.
Tang, Jialu, Natrina M. P. Toyong, and Norazmi Shahlal. "Service Requirement Analysis of Community Scrap Recycling Platform Based on Kano Model." Malaysian Journal of Social Sciences and Humanities (MJSSH) 9, no. 5 (May 28, 2024): e002828. http://dx.doi.org/10.47405/mjssh.v9i5.2828.
Narayanan, Sandeep, Mohammad Shikh-Bahaei, Jiancao Hou, and Mark F. Flanagan. "Wireless-Powered Distributed Spatial Modulation With Energy Recycling and Finite-Energy Storage." IEEE Transactions on Wireless Communications 17, no. 10 (October 2018): 6645–62. http://dx.doi.org/10.1109/twc.2018.2861870.
Dasgupta, Probal. "Linguistic recycling and the open community." Language Problems and Language Planning 25, no. 3 (December 31, 2001): 289–301. http://dx.doi.org/10.1075/lplp.25.3.06das.
Vidakis, Nectarios, Markos Petousis, Lazaros Tzounis, Sotirios A. Grammatikos, Emmanouil Porfyrakis, Athena Maniadi, and Nikolaos Mountakis. "Sustainable Additive Manufacturing: Mechanical Response of Polyethylene Terephthalate Glycol over Multiple Recycling Processes." Materials 14, no. 5 (March 2, 2021): 1162. http://dx.doi.org/10.3390/ma14051162.
Estelita, Sérgio, Guilherme Janson, Kelly Chiqueto, and Eduardo Silveira Ferreira. "Effect of Recycling Protocol on Mechanical Strength of Used Mini-Implants." International Journal of Dentistry 2014 (2014): 1–5. http://dx.doi.org/10.1155/2014/424923.
Moqbel, Shadi, Rund Abu-Zurayk, Ayat Bozeya, Raed Alsisan, and Abeer Al Bawab. "Assessment of sustainable recycling at The University of Jordan." International Journal of Sustainability in Higher Education 21, no. 6 (July 16, 2020): 1111–29. http://dx.doi.org/10.1108/ijshe-11-2019-0334.
Passas, Xenophontas, Roido Mitoula, Eleni Theodoropoulou, and Eleni Sardianou. "The Green Management of Paper of the Third Age in the Region of Attica. Case Study: The Municipalities of Egaleo and Chaidari." World Journal of Social Science Research 6, no. 3 (August 14, 2019): p335. http://dx.doi.org/10.22158/wjssr.v6n3p335.
Saginova, Olga, Dmitry Zavyalov, Natalia Kireeva, Nadezhda Zavyalova, and Yury Saginov. "Food-sharing in the distributed use economy." E3S Web of Conferences 247 (2021): 01016. http://dx.doi.org/10.1051/e3sconf/202124701016.
Zhang, Xinyu. "Optimizing the location choice of reverse logistics recycling network for end-of-life photovoltaic modules based on the EPR principle." International Journal of Global Economics and Management 2, no. 3 (April 25, 2024): 50–63. http://dx.doi.org/10.62051/ijgem.v2n3.06.
Wu, Chia-Jung, Guan-Jhong Wang, Chyuan Hauer Kao, Zhong-Jie Yang, Hsiang Chen, Yung-Sen Lin, Chia-Feng Lin, and Jung Han. "Photon-Recycling in Ultraviolet GaN-Based Photodiodes with Porous AlGaN Distributed Bragg Reflectors." ACS Applied Nano Materials 2, no. 8 (July 29, 2019): 5044–48. http://dx.doi.org/10.1021/acsanm.9b00973.
Abdul Halim, Husna, Mohamed Zuhaili Mohamed Najib, Muzaffar Zainal Abideen, Hazlami Fikri Basri, and Khalida Muda. "Study of Household Waste Management and Recycling Awareness Between Residential Areas in Kuala Nerang, Kedah, Malaysia." Industrial and Domestic Waste Management 2, no. 1 (May 24, 2022): 39–45. http://dx.doi.org/10.53623/idwm.v2i1.70.
Jameer, Vaughn-Xavier, Ambika Mallian, and Trina Halfhide. "Examining Solid Waste Practices and Littering at the University of the West Indies, St. Augustine Campus." Journal of Caribbean Environmental Sciences and Renewable Energy 3, no. 1 (August 2020): 17–22. http://dx.doi.org/10.33277/cesare/003.001/02.
Saari, Riduan, Siti Rohana Mohd Yatim, Ahmad Razali ishak, Farah Ayuni Shafie, Nadiah Wan Rasdi, Samsuri Abdullah, Muhammad Afiq Zaki, and Siti Norasyikin Mohamad Saifuddin. "Knowledge, Attitude, And Challenges of High-Rise Building Community Towards Waste Segregation and Recycling Practice in Metropolitan Kuala Lumpur, Malaysia." IOP Conference Series: Earth and Environmental Science 1217, no. 1 (July 1, 2023): 012023. http://dx.doi.org/10.1088/1755-1315/1217/1/012023.
Badraddin, Abdulmalek K., Rahimi A. Rahman, Saud Almutairi, and Muneera Esa. "Main Challenges to Concrete Recycling in Practice." Sustainability 13, no. 19 (October 7, 2021): 11077. http://dx.doi.org/10.3390/su131911077.
Mohammad Mohsin, Tasnim, Noor Ezlin Ahmad Basri, Shahrom Md. Zain, and Tiew Kian Ghee. "Effectiveness of Masjid Lestari Program on Recycling Practices among Bandar Baru Bangi and Semenyih Residents." Jurnal Kejuruteraan si1, no. 5 (November 30, 2018): 77–82. http://dx.doi.org/10.17576/jkukm-2018-si1(5)-11.
Erdiaw-Kwasie, Michael Odei, Kofi Kusi Owusu-Ansah, Matthew Abunyewah, Khorshed Alam, Abebe Hailemariam, Patrick Arhin, Kerstin K. Zander, and Jonatan Lassa. "Circular economy, environmental quality and tourism receipts in Europe: A time series data analysis." PLOS ONE 18, no. 11 (November 30, 2023): e0288098. http://dx.doi.org/10.1371/journal.pone.0288098.
Yagi, Ryohei, and Toru H. Okabe. "Review: Rhenium and its smelting and recycling technologies." International Materials Reviews 69, no. 2 (March 2024): 142–77. http://dx.doi.org/10.1177/09506608241229042.
Beltrán, Freddys R., Marina P. Arrieta, Eduardo Moreno, Gerald Gaspar, Luisa M. Muneta, Ruth Carrasco-Gallego, Susana Yáñez, David Hidalgo-Carvajal, María U. de la Orden, and Joaquín Martínez Urreaga. "Evaluation of the Technical Viability of Distributed Mechanical Recycling of PLA 3D Printing Wastes." Polymers 13, no. 8 (April 12, 2021): 1247. http://dx.doi.org/10.3390/polym13081247.
Sasmoko, Khalid Zaman, Maida Malik, Usama Awan, Wiwik Handayani, Mohd Khata Jabor, and Muhammad Asif. "Environmental Effects of Bio-Waste Recycling on Industrial Circular Economy and Eco-Sustainability." Recycling 7, no. 4 (August 15, 2022): 60. http://dx.doi.org/10.3390/recycling7040060.
Hari Rao, V. Sree, and P. Raja Sekhara Rao. "Stability analysis of resource-consumer dynamic models." ANZIAM Journal 47, no. 3 (January 2006): 413–38. http://dx.doi.org/10.1017/s1446181100009925.
Tian, Baodan, Shouming Zhong, Ning Chen, and Xianqing Liu. "Impulsive control strategy for a chemostat model with nutrient recycling and distributed time-delay." Mathematical Methods in the Applied Sciences 37, no. 4 (June 4, 2013): 496–507. http://dx.doi.org/10.1002/mma.2807.
MİÇOOĞULLARI, Seyit Ali, and Maya MOALLA. "Circular Economy, Solid Waste Recovery, and Growth: An Empirical Analysis for Sustainable Development in the 100th Anniversary of the Republic." Gaziantep University Journal of Social Sciences 22, Cumhuriyet'in 100. Yılı (October 28, 2023): 373–85. http://dx.doi.org/10.21547/jss.1354297.
Baetz, Nicholas W., and James R. Goldenring. "Rab11-family interacting proteins define spatially and temporally distinct regions within the dynamic Rab11a-dependent recycling system." Molecular Biology of the Cell 24, no. 5 (March 2013): 643–58. http://dx.doi.org/10.1091/mbc.e12-09-0659.
Terai, Tomoya, Noriyuki Nishimura, Ikuno Kanda, Natsuo Yasui, and Takuya Sasaki. "JRAB/MICAL-L2 Is a Junctional Rab13-binding Protein Mediating the Endocytic Recycling of Occludin." Molecular Biology of the Cell 17, no. 5 (May 2006): 2465–75. http://dx.doi.org/10.1091/mbc.e05-09-0826.
Kamaruzaman, N. H. I., N. S. Abdul Halim, N. H. A. Malek, and N. S. U. Idris. "Households awareness and practices on used cooking oil recycling in Felda Lepar Hilir 1, Pahang." IOP Conference Series: Earth and Environmental Science 1102, no. 1 (November 1, 2022): 012073. http://dx.doi.org/10.1088/1755-1315/1102/1/012073.
Shi, Yan, Shanshan Shao, Xuexi Yang, Da Wang, Bingrong Chen, and Min Deng. "Metabolic Process Modeling of Metal Resources Based on System Dynamics—A Case Study for Steel in Mainland China." Sustainability 15, no. 13 (June 28, 2023): 10249. http://dx.doi.org/10.3390/su151310249.
Burke, S., L. Heathwaite, P. Quinn, S. Merrett, P. Whitehead, N. Preedy, D. Lerner, and A. Saul. "Strategic management of non-point source pollution from sewage sludge." Water Science and Technology 47, no. 7-8 (April 1, 2003): 305–10. http://dx.doi.org/10.2166/wst.2003.0703.
Julapong, Pongsiri, Apisit Numprasanthai, Ladda Tangwattananukul, Onchanok Juntarasakul, Palot Srichonphaisarn, Kosei Aikawa, Ilhwan Park, Mayumi Ito, Carlito Baltazar Tabelin, and Theerayut Phengsaart. "Rare Earth Elements Recovery from Primary and Secondary Resources Using Flotation: A Systematic Review." Applied Sciences 13, no. 14 (July 19, 2023): 8364. http://dx.doi.org/10.3390/app13148364.
Hassani, K., D. Atlaoui, and Y. Bouafia. "Punching of Concrete Slabs Reinforced by Recycling Waste." Journal of Applied Engineering Sciences 14, no. 1 (May 1, 2024): 89–96. http://dx.doi.org/10.2478/jaes-2024-0011.
Peeters, Bob, Nadine Kiratli, and Janjaap Semeijn. "A barrier analysis for distributed recycling of 3D printing waste: Taking the maker movement perspective." Journal of Cleaner Production 241 (December 2019): 118313. http://dx.doi.org/10.1016/j.jclepro.2019.118313.
Hubbard, Benjamin R., Lindsay I. Putman, Stephen Techtmann, and Joshua M. Pearce. "Open Source Vacuum Oven Design for Low-Temperature Drying: Performance Evaluation for Recycled PET and Biomass." Journal of Manufacturing and Materials Processing 5, no. 2 (May 20, 2021): 52. http://dx.doi.org/10.3390/jmmp5020052.
KOLBE, Karin. "Knowledge, attitudes and behaviour regarding waste management options in Romania: results from a school questionnaire." Journal of Economic Development, Environment and People 3, no. 4 (December 20, 2014): 95. http://dx.doi.org/10.26458/jedep.v3i4.93.
Kasmuri, N., S. N. A. Razak, Z. Yaacob, M. F. Miskon, N. H. Ramli, and N. Zaini. "Waste Segregation through Recycle and Composting Activities in Urban and Suburban Areas." IOP Conference Series: Earth and Environmental Science 1135, no. 1 (January 1, 2023): 012059. http://dx.doi.org/10.1088/1755-1315/1135/1/012059.
Wang, Zhen Yu, Ze Sheng Ji, Hong Yu Xu, and Tie Lei Zhang. "Coarsening Mechanism of Isothermal Heat Treatment for ADC14 Semi-Solid Alloy." Solid State Phenomena 192-193 (October 2012): 123–29. http://dx.doi.org/10.4028/www.scientific.net/ssp.192-193.123.