Готові списки джерел за темами / Disassemblability / Статті в журналах

Статті в журналах з теми "Disassemblability"

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Disassemblability.
Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-32 статей у журналах для дослідження на тему "Disassemblability".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

James, Ajith Tom, Om Parkash Gandhi, and Sanjeev Govindrao Deshmukh. "Development of methodology for the disassemblability index of automobile systems using a structural approach." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 231, no. 4 (August 5, 2016): 516–35. http://dx.doi.org/10.1177/0954407016656311.

Повний текст джерела
Анотація:
The time and effort required for maintenance of an automobile system are highly dependent on its disassemblability, which is one of the most important attributes of its maintainability. To evaluate the disassemblability index, i.e. to measure the ease of disassembly, the disassemblability factors (both the design factors and the contextual factors) of an automobile system are identified. These and their interrelations are modelled by considering their structure using the graph theory. The directed graph (digraph) of the disassemblability of the automobile system is defined; the nodes of this represent its disassemblability factors, while the edges represent their degrees of influence. An equivalent matrix of the digraph establishes the system’s disassemblability function which characterizes the disassemblability of the system, leading to development of the disassemblability index. A high value of the disassemblability index indicates that it is very easy to remove or replace parts. The disassemblability index ratio is used to compare the actual conditions of disassembly with the ideal conditions of disassembly. A case study of an automobile gearbox is illustrated using the step-by-step procedure of the proposed methodology of disassemblability. The proposed methodology is helpful to evaluate and compare various alternative designs of the automobile system and, therefore, can aid the design and development of automobile systems from the disassembly viewpoint.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Zhao, Na, Rui Mu, Wei Huang, and Wen Guang Lin. "Disassembly Analysis Based on Entropy and Extension Theory." Advanced Materials Research 569 (September 2012): 472–76. http://dx.doi.org/10.4028/www.scientific.net/amr.569.472.

Повний текст джерела
Анотація:
In view of the fuzziness and uncertainty characteristics of the index and evaluation incompatibility in the disassembly evaluation process, the disassembly evaluation model of fuzzy matter-element analysis based on entropy was proposed. Firstly, the fuzzy matter-element matrix and weight matrix was established, based on the analysis of the factors having influences on disassemblability. Then the dependent degree of each scheme was calculated to rank disassemblability of the product design schemes. Additionally, the index weight was determined by the method of entropy, which can effectively avoid interference of subjective factors in the process of weight determination. Finally, an example of disassemblability evaluation was given to show the effectiveness of the method.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Shin, C. K., and H. S. Cho. "On the generation of robotic assembly sequences based on separability and assembly motion stability." Robotica 12, no. 1 (January 1994): 7–15. http://dx.doi.org/10.1017/s0263574700018130.

Повний текст джерела
Анотація:
This paper presents a method for the automatic generation of robotic assembly sequences based on the verification of a disassemblability for a part to be disassembled. To derive the disassemblability of a candidate part, we first inference collision free assembly directions by extracting separable directions for the part and calculating the separability which gives information as to how the part can be easily separated. Using the result, we determine the disassemblability defined in terms of the separability and stability costs. The separability cost represents a facility of the part disassembly operation, while the stability cost represents a degree of the stability for the base assembly motion which gives a guidance for design of jig/fixture. The proposed method provides a potentially local optimal solution for finding a cost effective assembly plan, and the feasibility of generating robot motion programs by evaluating separable directions in flexible manufacturing applications. A case study is given to illustrate the concepts and procedure of the proposed scheme.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kimura, Fumihiko. "Disassemblability Evaluation for Machine Products." Journal of the Robotics Society of Japan 13, no. 4 (1995): 456–61. http://dx.doi.org/10.7210/jrsj.13.456.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

OHASHI, Toshijiro, and Yuzo HIROSHIGE. "Environmentally Conscious Manufacturing. Disassemblability Evaluation Method." Journal of the Japan Society for Precision Engineering 64, no. 4 (1998): 503–7. http://dx.doi.org/10.2493/jjspe.64.503.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zhu, Hai Tao, and Liang Cong. "Disassembly Sequence Planning of Steam Turbines for Virtual Maintenance." Key Engineering Materials 572 (September 2013): 335–39. http://dx.doi.org/10.4028/www.scientific.net/kem.572.335.

Повний текст джерела
Анотація:
Disassembly Sequence planning is the important module of virtual maintenance. Its foundational task is to test the disassemblability of parts, find out all the feasible disassembly sequences of targeted parts and search for the near-optimal disassembly sequence. In the paper, the spherical algorithm is used to test the disassemblability of parts. And then the disassembly direction of parts is determined by rules which are the simplified version of Gaussian map approach. Thus the near-optimal disassembly sequence is found out by optimizing all feasible disassembly sequences of targeted parts by ant colony algorithm. The simulation result of the sequence optimization proves to be the same with manual calculation considering comprehensive cost of the change of disassembly tools and disassembly directions. The set of approaches can be reference for disassembly sequence planning of large-scale mechanical products.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Mok, H. S., H. J. Kim, and K. S. Moon. "Disassemblability of mechanical parts in automobile for recycling." Computers & Industrial Engineering 33, no. 3-4 (December 1997): 621–24. http://dx.doi.org/10.1016/s0360-8352(97)00207-6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ha, Jong-Sung, Seung-Hak Choi, Sung-Yong Shin, Kyung-Yong Chwa, Soo-Young Chang, and Tony C. Woo. "On Deciding 3D Part Disassemblability and Surface Machinability." IIE Transactions 28, no. 10 (October 1996): 847–54. http://dx.doi.org/10.1080/15458830.1996.11770737.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

HORIUCHI, Hajime, Masakazu KOBAYASHI, and Masatake HIGASHI. "1104 Layout Design Method Considering Disassemblability in Conceptual Design." Proceedings of Design & Systems Conference 2012.22 (2012): _1104–1_—_1104–9_. http://dx.doi.org/10.1299/jsmedsd.2012.22._1104-1_.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

CHEN, Lianyi, Hideo FUJIMOTO, and Alauddin AHMED. "Strategic component design and products disassemblability evaluation for inverse manufacturing." Proceedings of Manufacturing Systems Division Conference 2002 (2002): 91–92. http://dx.doi.org/10.1299/jsmemsd.2002.91.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
11

Gonzales, Julirose, Novita Sakundarini, Raja Ariffin, and Zahari bin Taha. "Integrated Eco-Design Tool for Malaysian Automobile Industry." Journal of Advanced Computational Intelligence and Intelligent Informatics 14, no. 1 (January 20, 2010): 46–54. http://dx.doi.org/10.20965/jaciii.2010.p0046.

Повний текст джерела
Анотація:
Today’s manufacturing companies are burdened with the pressures of managing their products throughout its life cycles and ensure that their products have minimum impact in the environment through Eco-design methods. This paper looks into the different Product Eco-evaluation methods in terms of Material Recyclability, Manufacturing Process and Disassemblability used for Eco-design, especially in the automobile industry. From these methods, the authors propose an Eco-Design framework suited for Malaysian local automobile SMEs given their limited role in Automobile design.
Стилі APA, Harvard, Vancouver, ISO та ін.
12

Desai, Anoop, and Anil Mital. "Evaluation of disassemblability to enable design for disassembly in mass production." International Journal of Industrial Ergonomics 32, no. 4 (October 2003): 265–81. http://dx.doi.org/10.1016/s0169-8141(03)00067-2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
13

Parsa, Soran, and Mozafar Saadat. "Intelligent selective disassembly planning based on disassemblability characteristics of product components." International Journal of Advanced Manufacturing Technology 104, no. 5-8 (June 18, 2019): 1769–83. http://dx.doi.org/10.1007/s00170-019-03857-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
14

Germani, Michele, Marco Mandolini, Marco Marconi, and Marta Rossi. "An Approach to Analytically Evaluate the Product Disassemblability during the Design Process." Procedia CIRP 21 (2014): 336–41. http://dx.doi.org/10.1016/j.procir.2014.03.153.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
15

Sawanishi, Hideyuki, Kenta Torihara, and Nozomu Mishima. "A Study on Disassemblability and Feasibility of Component Reuse of Mobile Phones." Procedia CIRP 26 (2015): 740–45. http://dx.doi.org/10.1016/j.procir.2014.07.090.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
16

Go, T. F., D. A. Wahab, M. N. Ab Rahman, R. Ramli, and C. H. Azhari. "Disassemblability of end-of-life vehicle: a critical review of evaluation methods." Journal of Cleaner Production 19, no. 13 (September 2011): 1536–46. http://dx.doi.org/10.1016/j.jclepro.2011.05.003.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
17

Kobayashi, Masakazu, and Masatake Higashi. "2110 Optimal design of components layout considering disassemblability, fastening methods and thermal distribution." Proceedings of the Optimization Symposium 2014.11 (2014): _2110–1_—_2110–3_. http://dx.doi.org/10.1299/jsmeopt.2014.11.0__2110-1_.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
18

HORIUCHI, Hajime, Masakazu KOBAYASHI, and Masatake HIGASHI. "2307 Optimal Design of Product Layout and Connection between Parts to Improve Disassemblability." Proceedings of Design & Systems Conference 2013.23 (2013): _2307–1_—_2307–10_. http://dx.doi.org/10.1299/jsmedsd.2013.23._2307-1_.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
19

Zhu, Wenmin, Xiumin Fan, and Qichang He. "A hierarchical and process-oriented framework for disassemblability evaluation in product maintainability design." International Journal of Advanced Manufacturing Technology 110, no. 3-4 (August 16, 2020): 777–95. http://dx.doi.org/10.1007/s00170-020-05830-9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
20

WATANUKI, Keiichi. "Snap-Fit Design Considering Assemblability/Disassemblability and Its Design Review Using Immersive Virtual Environment." Journal of The Adhesion Society of Japan 43, no. 4 (2007): 149–57. http://dx.doi.org/10.11618/adhesion.43.149.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
21

WATANUKI, Keiichi, and Shigeru FUKABAYASHI. "Optimal Configuration of Cantilever Hook Type Snap-Fit Considering Assemblability/Disassemblability and Retention Performance." Proceedings of Conference of Kanto Branch 2004.10 (2004): 527–28. http://dx.doi.org/10.1299/jsmekanto.2004.10.527.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
22

KATAGIRI, Haruo. "On the Publication of a Issue on the Design for Assemblability / Disassemblability and Recyclability." Journal of the Society of Mechanical Engineers 101, no. 954 (1998): 348. http://dx.doi.org/10.1299/jsmemag.101.954_348.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
23

Beng, Lee Guang, and Omar Badrul. "Increasing End-of-Life Recovery Profit Using Axiomatic Design Principles: A Case of Mobile Phone Keypad." Applied Mechanics and Materials 773-774 (July 2015): 866–70. http://dx.doi.org/10.4028/www.scientific.net/amm.773-774.866.

Повний текст джерела
Анотація:
Application of axiomatic design (AD) for the purpose of enhancing end-of-life recovery potential of a product has been the main focus of this paper. To demonstrate the usage of AD in this particular area, a case study that involves keypad assemblies of mobile phones is presented. The functional requirements (FR) of the two assemblies were defined differently (only Handset 2 involves refurbishment-related FRs). Using evaluation approach presented by Kwak and Kim (2010), it can be observed that when recovery-related requirements are omitted, application of AD produces a keypad assembly that fulfills the FRs derived from customer needs with more complicated product architecture. In contrast, when recovery-related FRs are included during problem definition using axiomatic approach, the disassemblability of the resulted keypad is improved and thus increasing recovery potential in the event of replacing defective keypad, while satisfying product-related FRs.
Стилі APA, Harvard, Vancouver, ISO та ін.
24

Qiu, Lemiao, Xiaojian Liu, Shuyou Zhang, and Liangfeng Sun. "Disassemblability modeling technology of configurable product based on disassembly constraint relation weighted design structure matrix(DSM)." Chinese Journal of Mechanical Engineering 27, no. 3 (May 2014): 511–19. http://dx.doi.org/10.3901/cjme.2014.03.511.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
25

Karagoz, Selman, Nezir Aydin, and Vladimir Simic. "End-of-life vehicle management: a comprehensive review." Journal of Material Cycles and Waste Management 22, no. 2 (November 16, 2019): 416–42. http://dx.doi.org/10.1007/s10163-019-00945-y.

Повний текст джерела
Анотація:
AbstractWaste management is gaining very high importance in recent years. As automotive is one of the most critical sectors worldwide, which is rapidly increasing, the management of end-of-life vehicles (ELVs) gains importance day by day. Due to legislation and new regulations, actors like users, producers, and treatment facilities are being conferred new responsibilities in the ELV management process. Besides, the ELV management is of vital importance for environment conservation, circular economy and sustainable development. All of these reasons are making the ELV management such a crucial issue to study. Today, the ELV management is a well-positioned and emergent research area. However, the available review papers are focused only on a small area of the ELV management, such as reverse logistics, recovery infrastructure, disassemblability, etc. Besides, a review of state-of-the-art mathematical models for the ELV management is still missing. This paper aims to provide an extensive content analysis overview of studies on the ELV management. A total of 232 studies published in the period 2000–2019 are collected, categorized, reviewed and analyzed. A critical review of the published literature is provided. Gaps in the literature are identified to clarify and suggest future research directions. This review can provide a source of references, valuable insights, and opportunities for researchers interested in the ELV management and inspire their additional attention.
Стилі APA, Harvard, Vancouver, ISO та ін.
26

Ishikawa, Haruo, Hironobu Yuki, and Satoshi Miyazaki. "Design Information Modeling in 3-D CAD System for Concurrent Engineering and Its Application to Evaluation of Assemblability/Disassemblability in Conceptual Design." Concurrent Engineering 8, no. 1 (March 2000): 24–31. http://dx.doi.org/10.1177/1063293x0000800103.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
27

Ishikawa, Haruo, Hironobu Yuki, and Satoshi Miyazaki. "Design Information Modeling in 3-D CAD System for Concurrent Engineering and Its Application to Evaluation of Assemblability/Disassemblability in Conceptual Design." Concurrent Engineering: Research and Applications 8, no. 1 (March 1, 2000): 24–31. http://dx.doi.org/10.1106/m50v-0u90-7fqy-jbr6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
28

Erdmann, Julian Grosse, Jan Koller, Jil Brimaire, and Frank Döpper. "Assessment of the disassemblability of electric bicycle motors for remanufacturing." Journal of Remanufacturing, March 13, 2023. http://dx.doi.org/10.1007/s13243-023-00124-1.

Повний текст джерела
Анотація:
AbstractIn 2021, sales of electric bicycles in Germany increased compared to the previous year, leading to a 43% share of electric bicycles in the total German bicycle market. The German Bicycle Industry Association (ZIV) expects this growth to continue and that by 2025 every second bicycle sold in Germany will have an electric motor. Therefore, due to the increasing number of sales, both the built-in resources and the possible treatments after the use phase need to be considered regarding sustainable market development. In this context, remanufacturing is one promising end-of-life strategy that enables a new life cycle of products and components, thus reducing the consumption of natural resources and minimizing waste production. The used products are restored to their original conditions by disassembling, cleaning, sorting, reworking, and reassembling. Disassembly is a decisive process step as it creates the prerequisites for all further steps in the process chain and significantly determines the economic feasibility of a remanufacturing process. Therefore, this paper aims to evaluate the ease of disassembly of electric bicycle motors and thus determine their suitability for remanufacturing. To evaluate the disassemblability, the ease of Disassembly Metric (eDiM), a quantitative assessment method for evaluating disassembly effort, was adapted to the needs of the electric bicycle motors. The method was finally applied to five electric bicycle motors from established manufacturers and assessed their ease of disassembly. The results show that the electric bicycle motors can be disassembled without significant damage and classified as suitable for remanufacturing.
Стилі APA, Harvard, Vancouver, ISO та ін.
29

"A MODIFIED ANALYTICAL HIERARCHY PROCESS DESIGN EVALUATION METHODS FOR PRODUCT RECOVERY." Journal of Engineering & Technological Advances, October 19, 2021. http://dx.doi.org/10.35934/segi.v6i1.16.

Повний текст джерела
Анотація:
The absence of existing standards for product recovery planning and the associated difficulty in prioritising the conflicting design requirements are among the main challenges faced during product design. In this paper, a concept for the Design for Multiple Life-Cycles (DFMLC) is proposed to address this situation. The objective of the DFMLC model is to assist designers in evaluating design attributes of Multiple Life-Cycle Products (MLCP) at the early design stage. The methodology adopted for the evaluation of MLCP design strategies has been based on a modified Analytical Hierarchy Process (AHP). Two mapping matrices of the design guidelines and design strategies concerning MLCP design attributes were developed for the modified AHP model. Disassemblability (> 21 %) was found to be the most important design element for MLCP followed by serviceability (> 20 %) and reassembly (> 12 %).
Стилі APA, Harvard, Vancouver, ISO та ін.
30

Emadi, Jain. "An Assembly Approach for Determining the Maintainability index for Engineered Products." Journal of Machine and Computing, January 5, 2021, 39–47. http://dx.doi.org/10.53759/7669/jmc202101005.

Повний текст джерела
Анотація:
It is challenging for maintenance of activities to be assured during products’ life cycle when poor maintenance is the case. Poor maintenance of engineered products will lead to an increment in cost and time is fundamental in the development of maintainability tasks for engineering firms. Maintenance design had played a significant role in complex designing of engineering products. This research presents a critical approach to evaluate and determine a maintainability index using the assembly principle. Normally, time is a critical indicator and parameter being utilized to measure maintenance; however, minimal efforts have been focused on assembly components and the principle of assembly. In the past literature works, customer study and survey on the effects of operators’ skills have been done. In this research, maintainability index is determined. Every assembly type is weighted with reference to features such as assembly direction, costs and disassemblability. Resultantly, this research seeks to enhance the efficiency of maintenance of engineered products.
Стилі APA, Harvard, Vancouver, ISO та ін.
31

Mesa, Jaime A., and Arturo González-Quiroga. "Development of a diagnostic tool for product circularity: a redesign approach." Research in Engineering Design, March 27, 2023. http://dx.doi.org/10.1007/s00163-023-00415-5.

Повний текст джерела
Анотація:
AbstractThe design of circular products is gaining relevance among academics, practitioners, and industry as a critical step to face material scarcity, the unsustainability of industrial processes, and excessive waste generation. Therefore, product design is a powerful research field to promote material, component, and product circularity throughout several lifecycles. However, there is a lack of formal methods to measure the circularity of products, especially from the early design stages. Therefore, this paper proposes a diagnostic tool for measuring circularity, identifying potential improvement opportunities, and redesigning interventions in the conceptual design phase. The tool consists of eight single indicators that measure disassemblability, reassemblability, durability, modularity, simplicity, standardization, commonality, relative costs, and the number of secondary functions of products. A case study is presented to validate the tool, considering several improvement scenarios around the 6R strategies. Finally, a list of redesign interventions for each improvement scenario was assembled as a primary output of the proposed tool.
Стилі APA, Harvard, Vancouver, ISO та ін.
32

Hu, Yang, Raghunathan Srinivasan, Jessica Spoll, and Gaurav Ameta. "Graph Based Method and Tool for Complete and Selective Disassembly Time Estimation in Early Design." Journal of Computing and Information Science in Engineering 15, no. 3 (September 1, 2015). http://dx.doi.org/10.1115/1.4029752.

Повний текст джерела
Анотація:
The goal of this research is to develop a method and tool (a) to estimate disassembly time automatically from early embodiment design based CAD model and (b) to provide design suggestions to improve product disassemblability. Disassembly is a critical process in the end-of-life (EOL) stage of a product. It is usually followed by sorting and then by material recovery for recycling or part recovery for reuse or remanufacturing. Manual estimation of disassembly time, through physical prototype disassembly or through Boothroyd and Dewhurst system, is time consuming and is not applicable in the early design stage. In this research, graph based data structures and related metrics are utilized to estimate complete and selective disassembly time at embodiment design stage. Selective disassembly is important when a single part of subassembly is to be recovered while the rest of the product is to be discarded. Selective disassembly time is estimated by merging particular nodes in assembly and bipartite graph and then recomputing the graph metrics. The method and algorithm presented in this paper is implemented using SolidWorks application programming interface (API) in Visual C#. Results are compared with the results obtained by Boothroyd and Dewhurst method, the error range is reasonable.
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії