Добірка наукової літератури з теми "Digital twin modelling"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Digital twin modelling".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Digital twin modelling"
Alford, Molly, Isuru Udugama, Wei Yu, and Brent Young. "Flexible digital twins from commercial off-the-shelf software solutions: a driver for energy efficiency and decarbonisation in process industries?" Chemical Product and Process Modeling 17, no. 4 (August 1, 2022): 395–407. http://dx.doi.org/10.1515/cppm-2021-0045.
Повний текст джерелаKuznetsova, Nataliya, Tatyana Karlova, and Aleksandr Bekmeshov. "Building a digital twin of the main automated systems of an industrial enterprise to determine the level of information security." Ergodesign 2021, no. 2 (May 26, 2021): 97–102. http://dx.doi.org/10.30987/2658-4026-2021-2-97-102.
Повний текст джерелаGardner, Paul, Mattia Dal Borgo, Valentina Ruffini, Aidan J. Hughes, Yichen Zhu, and David J. Wagg. "Towards the Development of an Operational Digital Twin." Vibration 3, no. 3 (September 4, 2020): 235–65. http://dx.doi.org/10.3390/vibration3030018.
Повний текст джерелаHerakovič, Niko, Hugo Zupan, Miha Pipan, Jernej Protner, and Marko Šimic. "Distributed Manufacturing Systems with Digital Agent." Strojniški vestnik – Journal of Mechanical Engineering 65, no. 11-12 (November 18, 2019): 650–57. http://dx.doi.org/10.5545/sv-jme.2019.6331.
Повний текст джерелаCiliberti, Francesco G., Luigi Berardi, Daniele B. Laucelli, and Orazio Giustolisi. "Digital Water Services using Digital Twin paradigm." IOP Conference Series: Earth and Environmental Science 1136, no. 1 (January 1, 2023): 012002. http://dx.doi.org/10.1088/1755-1315/1136/1/012002.
Повний текст джерелаBárkányi, Ágnes, Tibor Chován, Sándor Németh, and János Abonyi. "Modelling for Digital Twins—Potential Role of Surrogate Models." Processes 9, no. 3 (March 7, 2021): 476. http://dx.doi.org/10.3390/pr9030476.
Повний текст джерелаRamasubramanian, Aswin K., Robins Mathew, Matthew Kelly, Vincent Hargaden, and Nikolaos Papakostas. "Digital Twin for Human–Robot Collaboration in Manufacturing: Review and Outlook." Applied Sciences 12, no. 10 (May 10, 2022): 4811. http://dx.doi.org/10.3390/app12104811.
Повний текст джерелаStarkey, J., C. Hancock, L. Chen, and Q. Meng. "DIGITAL TWINNING PROOF OF CONCEPT FOR UTILITY-SCALE SOLAR: BENEFITS, ISSUES, AND ENABLERS." International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLVI-5/W1-2022 (February 3, 2022): 231–37. http://dx.doi.org/10.5194/isprs-archives-xlvi-5-w1-2022-231-2022.
Повний текст джерелаLoaiza, Jonatan H., Robert J. Cloutier, and Kari Lippert. "Proposing a Small-Scale Digital Twin Implementation Framework for Manufacturing from a Systems Perspective." Systems 11, no. 1 (January 11, 2023): 41. http://dx.doi.org/10.3390/systems11010041.
Повний текст джерелаSULITKA, MATEJ, PETR KOLAR, JIRI SVEDA, and JAN SMOLIK. "STRATEGY FOR IMPLEMENTATING PREDICTIVE PROCESS-ORIENTED MACHINE TOOL DIGITAL TWINS." MM Science Journal 2022, no. 3 (September 27, 2022): 5954–61. http://dx.doi.org/10.17973/mmsj.2022_10_2022121.
Повний текст джерелаДисертації з теми "Digital twin modelling"
Huang, Chengxue, and Hampus Wranér. "Lifecycle management and smart manufacturing: Modelling and implementation to utilize the digital twin." Thesis, KTH, Industriell produktion, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-232369.
Повний текст джерелаSmart tillverkning – smarta fabriker som skapar smarta produkter – är ett ämne som inom det akademiska och affärsmässiga området förekommer alltmer frekvent. Denna uppsats behandlar smart tillverkning i kontexten av Product Life Cycle Support (PLCS). Uppsatsen undersökte hur PLCS kunde utnyttjas för att möjliggöra smart tillverkning, med huvudsakligt fokus på möjliggörandet av den bakomliggande system- och informationsinfrastrukturen för smart tillverkning. Standarder, rapporter och specifikationer för smart tillverkning undersöktes. Flertalet informationsmodeller skapades utifrån dessa publikationer vilka kunde användas för att implementera ett förslag för infrastrukturen.Implementationen hade sin bas i det pågående forskningsprojektet DigIn, och använde de utvecklade modellerna för att implementera en föreslagen lösning i produktlivscykel-mjukvaran ShareAspace. Detta gjordes för att utvärdera hur funktionaliteten i ShareAspace och PLCS skulle kunna användas för att stödja smart tillverkning och uppdatera den digitala tvillingen. Parallellt med denna implementation genomfördes i DigIn ett projekt vilka kopplade samman databasen med annan mjukvara i systemet samt fabriksgolvet. Lösningen använde en Plant Service Bus (Kafka) och REST APIer för att koppla samman dessa. Funktionaliteten av systemet rörande specificerade krav som återfanns i publikationerna undersöktes sedan.Lösningen fanns möta de flesta av de krav som lades fram i de undersökta publikationerna rörande, bland annat, livscykelshantering, tjänsteorienterad arkitektur, icke-hierarkiska strukturer samt kommunikationsmöjligheter.
Riabichev, Maxim. "Modelling a Scalable, Reusable and Realistic Digital Twin for Virtual Commissioning : Investigating possibilities with custom SmartComponents in ABB RobotStudio." Thesis, Mittuniversitetet, Institutionen för elektronikkonstruktion, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-37298.
Повний текст джерелаAvdelningen Advanced Manufacturing på ÅF Pöyry AB utforskar möjligheter med ”Virtual Commissioning” och ”Digital Twins”. Som ett led i detta projekt har syftet med detta examensarbete varit att visa ett sätt att utveckla en skalbar, återanvändbar och realistisk digital mekatronisk modell för den virtuella miljön i RobotStudio. Tidigare forskning har visat, i linje med ÅF Pöyry AB:s satsning, att ett av de stora hinder för att Virtual Commissioning ska kunna implementeras som standard i industrin idag är bristen av skalbara och återanvändbara digitala tvillingar. Efter en genomgång av den befintliga och föreslagna metoden för att utveckla digitala tvillingar presenteras de nödvändiga stegen för att utveckla en SmartComponent för RobotStudio, med programmeringsspråket C#. Resultaten av utvecklingen och testen har visat att den utvecklade SmartComponent är skalbar och återanvändbar: den fungerar med gripare oavsett antal fingrar och den tillåter gripning både genom att applicera tryck på plockobjektet från utsidan och insidan. Den är också realistiskt på så vis att interaktionen mellan griparen och objekten som ska plockas i den virtuella miljön beter sig och ser ut som i verkligheten. Implementeringen av den utvecklade SmartComponent är också mycket effektivare och mindre komplex jämfört med den metod som används idag på ÅF Pöyry AB. Nackdelarna med den föreslagna metoden är de extra kompetenskraven för automationsingenjörer och risken att den digitala tvillingen inte är framtidssäker.
Birtic, Martin. "An Open Data Model for Emulation Models of Industrial Components." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-15224.
Повний текст джерелаEmulering är en teknologi som historiskt mestadels använts vid virtuel idrifttagning av industriella automatiserade system samt vid operatörsträning. Trender visar att nya användningsområden utforskas. Ett sätt att vidga användningsområdet för emulering är att öka dess detaljnivå. Högskolan i Skövde utför forskning inom emulering och utvecklar en emuleringsplattform med utökad detaljnivå, även kallad komponentnivån. För att kunna arbeta systematiskt med utvecklandet av emuleringsmodeller för denna nivå önskas en öppen, skalbar, och flexibel datamodell för emuleringsmodeller. Detta examensarbete bidrar till detta genom att utveckla ett första utkast av en sådan data modell. Datamodellen demonstreras genom implementation inom den utvecklandes emuleringsmiljön, med hjälp av filformatet XML. En iterativ "design and creation" metodologi användes för att utveckla och implementera datamodellen. Ett set av industriella komponenter användes i utvecklingen och implementationen av datamodellen. Projektets resultat presenteras som ett klassdiagram tillsammans med förklarande dokumentation. Används projektes metodologi och datamodellerings-strategi kan man med fördel arbeta transparant och systematiskt med utveckling av emuleringsmodeller för anginven nivå.
TWIN
Mastio, Claudio. "Integrazione di modelli BIM e sensori IoT per la gestione di gemelli digitali in campo strutturale." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2022.
Знайти повний текст джерелаTchana, De Tchana Yvan. "Proposition d’un jumeau numérique pour soutenir la gestion de l'exploitation d'une infrastructure linéaire." Thesis, Troyes, 2021. http://www.theses.fr/2021TROY0012.
Повний текст джерелаThe digital growth of the construction industry led to BIM (Building Information Modeling). Developed for buildings, BIM is later used on linear infrastructure projects. Such projects require end-to-end control of information. PLM (Product Lifecycle Management) supports digital continuity in the manufacturing industry. Studies evaluate the relevance of a complementary use of the BIM and PLM approaches for linear infrastructure projects. With an adaptation of methods used for building construction, those studies are mostly restricted to the implementation of data repositories. This makes it difficult to consider the infrastructure post-construction phase, where the 3D model is no longer a digital model, but a digital twin. This research work consists in developing a strategy for the design, the implementation and the operations and maintenance of a linear infrastructure. The digital twin of the infrastructure is the target of our approach. It will take into consideration not only BIM and PLM methodologies, but also any other data source positioning the infrastructure in its geographical environment. Data aggregator, our digital twin should make it possible to manage the lifecycle of a linear infrastructure. This system is tested on a specific linear infrastructure, a level crossing. Digital continuity and data traceability are important factors for those constructions. Through the digital twin, our proposal helps to follow the data, and thus to link operational data to the design and construction data of the linear infrastructure
Afzal, Muhammad. "BIM 7D: research on applications for operations & maintenance." Master's thesis, 2021. http://hdl.handle.net/1822/76166.
Повний текст джерелаThroughout the project life cycle in the built environment, the extensive employment of Building Information Modelling (BIM) and the very recent advancements of other digital technologies have provided various new insights and decision-making capabilities. As a result, a large amount of data must be conveyed, altered, coordinated, and exchanged across multiple stakeholders throughout the construction process. The potential of cost management, facility maintenance to the information sharing and monitoring of the built asset put in an environment has led to the concept of a greater level of detailing of the built asset model emerging in recent years. The digitization/computerization of various phases and processes of built environments is growing to have a broad influence on how architecture, engineering, and construction (AEC) sector’s projects are planned, developed, and managed, as a result of the development of huge data in projects. The intersection of digital technologies and smart systems, along with data systems, has lately been identified as one of the most innovative and cutting-edge technological breakthroughs in the built environment. Although the integration of digital technology into the AEC industry’s practices has proven benefits throughout the lifecycle of the built asset and this incorporation has the potential to transform the construction industry, however, there exist still challenges in its intelligent implementation. For instance, one of the major problems is its precise and efficient employment for required outcomes that confirms the solid need for an intuitive framework. Therefore, the present dissertation is influentially aimed at developing a systematic guide document for the efficient implementation of digital twin technology in the built environment. A step-by-step guide framework (termed as Digital Twin Execution Plan – DTxP) is prepared that follows the workflows and information exchange requirements in order to effectively employ digitalization in the available built environment projects. A thorough literature review is carried out to collect the relevant scientific information and different codes of practice were also consulted to make sure the alignment of the developed framework with the regional and international standards. Industry practitioners were also consulted in order to get feedback on the real-life industry practices and how digitalization can really be implemented while solving the existing problems. The developed framework document reflects a comprehensive set of information on when, how, and who is responsible for what task(s) when a higher amount of productivity is required in a built environment project that is employing digital twin technology. Although the guide document is targeted to employ the digitalization in reinforced concrete bridge structure for its structural performance analysis, fatigue assessment, traffic monitoring, and ground stability, among others, the developed framework could be extended by the industry professionals working in BIM to control the information throughout the built asset’s life cycle. Besides, the development document could serve as a benchmark or a template document to follow when efficient employment of the digital twin technology into the built environment practices is needed.
Ao longo do ciclo de vida de uma construção, a ampla adoção de Building Information Modeling (BIM) e o recente advento de outras tecnologias digitais forneceram várias novas perspetivas e recursos para a tomada de decisão. Como resultado, uma grande quantidade de dados deve ser transmitida, alterada, coordenada e trocada entre as várias partes interessadas ao longo do processo de construção. A digitalização/informatização de várias fases e processos de uma construção está a crescer em direção a uma ampla influência em como os projetos do setor de arquitetura, engenharia e construção e operados pelo proprietário (AECO) são planeados, desenvolvidos e geridos, como resultado do desenvolvimento de enormes dados em projetos. A interseção das tecnologias digitais e sistemas inteligentes, juntamente com os sistemas de dados, foi recentemente identificada como um dos avanços tecnológicos mais inovadores e de ponta no ambiente construído. Embora a integração da tecnologia digital nas práticas da indústria de AEC tenha benefícios comprovados ao longo do ciclo de vida do ativo construído e esta incorporação tenha o potencial de transformar a indústria da construção ainda existem desafios na sua implementação inteligente. Por exemplo, um dos principais problemas é a sua utilização de forma precisa e eficiente para os resultados exigidos, o que confirma a necessidade sólida de uma estrutura intuitiva. Portanto, a presente dissertação tem como objetivo desenvolver um documento guia sistemático para a implementação eficiente da tecnologia digital twin no ambiente construído. É elaborado um guia passo a passo (denominado Digital Twin Execution Plan - DTxP) que segue os fluxos de trabalho e os requisitos de troca de informações para empregar efetivamente a digitalização nos projetos de ambiente construído disponíveis. Para esse efeito, é realizada uma revisão exaustiva da literatura para coletar as informações científicas relevantes. Diferentes códigos de prática foram também consultados para garantir o alinhamento da estrutura desenvolvida com regulamentação local. Profissionais da indústria também foram consultados para obter feedback das práticas da indústria da vida real e como a digitalização pode realmente ser implementada enquanto se resolve os problemas existentes. O documento de estrutura desenvolvido reflete um conjunto abrangente de informações sobre quando, como e quem é responsável por quais tarefas quando uma quantidade maior de produtividade é necessária em um projeto de ambiente construído que está empregando tecnologia digital dupla. Embora o documento-guia tenha como objetivo empregar a digitalização em estruturas de pontes de betão armado para efeitos de análise de desempenho estrutural, avaliação de fadiga, monitorização de tráfego e estabilidade do solo, entre outros, a estrutura desenvolvida pode ser estendida pelos profissionais da indústria que trabalham em BIM para controlar o informações ao longo do ciclo de vida do ativo construído.
Частини книг з теми "Digital twin modelling"
Cervenka, Jan, and Jiri Rymes. "Digital Twin for Modelling Structural Durability." In RILEM Bookseries, 79–89. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-07746-3_8.
Повний текст джерелаGobeawan, Like, Daniel J. Wise, Sum Thai Wong, Alex T. K. Yee, Chi Wan Lim, and Yi Su. "Tree Species Modelling for Digital Twin Cities." In Transactions on Computational Science XXXVIII, 17–35. Berlin, Heidelberg: Springer Berlin Heidelberg, 2021. http://dx.doi.org/10.1007/978-3-662-63170-6_2.
Повний текст джерелаMaryasin, Oleg Yu. "Digital Twin of Building Heating Substation: An Example of a Digital Twin of a Cyber-Physical System." In Cyber-Physical Systems: Modelling and Industrial Application, 61–73. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-95120-7_6.
Повний текст джерелаFoldager, Frederik F., Casper Thule, Ole Balling, and PeterGorm Larsen. "Towards a Digital Twin - Modelling an Agricultural Vehicle." In Leveraging Applications of Formal Methods, Verification and Validation: Tools and Trends, 109–23. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-83723-5_8.
Повний текст джерелаJakovljevic, Luka, Dimitre Kostadinov, Armen Aghasaryan, and Themis Palpanas. "Towards Building a Digital Twin of Complex System Using Causal Modelling." In Complex Networks & Their Applications X, 475–86. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-93409-5_40.
Повний текст джерелаPapacharalampopoulos, Alexios, and Panagiotis Stavropoulos. "Manufacturing Process Optimization via Digital Twins: Definitions and Limitations." In Lecture Notes in Mechanical Engineering, 342–50. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18326-3_33.
Повний текст джерелаZotov, Evgeny, Ashutosh Tiwari, and Visakan Kadirkamanathan. "Towards a Digital Twin with Generative Adversarial Network Modelling of Machining Vibration." In Proceedings of the 21st EANN (Engineering Applications of Neural Networks) 2020 Conference, 190–201. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-48791-1_14.
Повний текст джерелаMalaka, Julian, and Mariusz Hetmańczyk. "Intelligent Drive in Industry 4.0 – Protection of Toothed Belt Transmission on the Basis of Its Digital Twin." In Modelling in Engineering 2020: Applied Mechanics, 201–10. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68455-6_18.
Повний текст джерелаLu, Qiuchen, Xiang Xie, Ajith Kumar Parlikad, Jennifer Schooling, Michael Pitt, Li Wan, Timea Nochta, Jiayi Yan, Xu Shen, and Kai Yin. "Digital twin implementations at the regional and city levelsPART 1: CITY-SCALE DIGITAL TWIN PROTOTYPE FOR CAMBRIDGE BIOMEDICAL CAMPUSPART 2: SMART POLI, CHINA – A CASE STUDY OF DIGITAL TWIN APPLICATION IN CITY GOVERNANCE AND SERVICES, BASED ON CITY INFORMATION MODELLING." In Digital Twins in the Built Environment, 305–44. London: ICE Publishing, 2022. http://dx.doi.org/10.1680/dtbe.65802.305.
Повний текст джерелаFitzgerald, John, Peter Gorm Larsen, and Ken Pierce. "Multi-modelling and Co-simulation in the Engineering of Cyber-Physical Systems: Towards the Digital Twin." In From Software Engineering to Formal Methods and Tools, and Back, 40–55. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30985-5_4.
Повний текст джерелаТези доповідей конференцій з теми "Digital twin modelling"
Corradini, Flavio, Arianna Fedeli, Andrea Polini, and Barbara Re. "Towards a Digital Twin Modelling Notation." In 2022 IEEE Intl Conf on Dependable, Autonomic and Secure Computing, Intl Conf on Pervasive Intelligence and Computing, Intl Conf on Cloud and Big Data Computing, Intl Conf on Cyber Science and Technology Congress (DASC/PiCom/CBDCom/CyberSciTech). IEEE, 2022. http://dx.doi.org/10.1109/dasc/picom/cbdcom/cy55231.2022.9927827.
Повний текст джерелаMajor, Pierre, Guoyuan Li, Houxiang Zhang, and Hans Petter Hildre. "Real-Time Digital Twin Of Research Vessel For Remote Monitoring." In 35th ECMS International Conference on Modelling and Simulation. ECMS, 2021. http://dx.doi.org/10.7148/2021-0159.
Повний текст джерелаYang, Chunsheng, Rahatara Ferdousi, Abdulmotaleb El Saddik, Yifeng Li, Zheng Liu, and Min Liao. "Lifetime Learning-enabled Modelling Framework for Digital Twin." In 2022 IEEE 18th International Conference on Automation Science and Engineering (CASE). IEEE, 2022. http://dx.doi.org/10.1109/case49997.2022.9926693.
Повний текст джерелаHaryono, I. S., A. L. Saw, S. W. Lee, and Lewis C. K. Wong. "Digital Twin for Geotechnical Engineering Applications." In The HKIE Geotechnical Division 41st Annual Seminar. AIJR Publisher, 2022. http://dx.doi.org/10.21467/proceedings.126.7.
Повний текст джерелаJohansen, Sigrid S., and Amir R. Nejad. "On Digital Twin Condition Monitoring Approach for Drivetrains in Marine Applications." In ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/omae2019-95152.
Повний текст джерелаAyello, Francois, Guanlan Liu, Yonghe Yang, and Ning Cui. "Probabilistic Digital Twins for Transmission Pipelines." In 2020 13th International Pipeline Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/ipc2020-9240.
Повний текст джерелаKoistinen, Antti, Markku Ohenoja, Jani Tomperi, and Mika Ruusunen. "Adaptation framework for an industrial digital twin." In SIMS Conference on Simulation and Modelling SIMS 2020, September 22-24, Virtual Conference, Finland. Linköping University Electronic Press, 2021. http://dx.doi.org/10.3384/ecp20176365.
Повний текст джерелаTrauer, Jakob, Michael Mutschler, Markus Mörtl, and Markus Zimmermann. "Challenges in Implementing Digital Twins – a Survey." In ASME 2022 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/detc2022-88786.
Повний текст джерелаBOLOGNESI, CECILIA MARIA, and Martina Signorini. "DIGITAL TWINS: COMBINED SURVEYING PRAXIS FOR MODELLING." In ARQUEOLÓGICA 2.0 - 9th International Congress & 3rd GEORES - GEOmatics and pREServation. Editorial Universitat Politécnica de Valéncia: Editorial Universitat Politécnica de Valéncia, 2021. http://dx.doi.org/10.4995/arqueologica9.2021.12137.
Повний текст джерелаRodič, Blaž. "CREATING THE DIGITAL TWIN WITH GENERAL PURPOSE SIMULATION MODELLING TOOLS." In 2nd International Scientific Conference. Association of Economists and Managers of the Balkans, Belgrade, Serbia, 2018. http://dx.doi.org/10.31410/itema.2018.20.
Повний текст джерела