Добірка наукової літератури з теми "Diffusion Raman Exaltée de Surface (DRES)"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Diffusion Raman Exaltée de Surface (DRES)".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Diffusion Raman Exaltée de Surface (DRES)":
Boubekeur-Lecaque, Leïla, Nordin Felidj, and Marc Lamy de la Chapelle. "Comprendre. La diffusion Raman exaltée de surface." Photoniques, no. 90 (January 2018): 41–44. http://dx.doi.org/10.1051/photon/20189041.
Felidj, Nordin. "Introduction à… La spectroscopie Raman et la diffusion exaltée de surface." Photoniques, no. 81 (April 2016): 46–49. http://dx.doi.org/10.1051/photon/20168146.
Felidj, Nordin. "Introduction à la spectroscopie Raman classique et à la diffusion Raman exaltée de surface." Photoniques, no. 96 (May 2019): 39–42. http://dx.doi.org/10.1051/photon/20199639.
Dowek, Antoine, Laetitia Lê, Anais Amar, and Eric Caudron. "Diffusion Raman exaltée de surface (SERS) appliquée à l’analyse du 5-fluorouracile." Le Pharmacien Hospitalier et Clinicien 54, no. 1 (March 2019): 104. http://dx.doi.org/10.1016/j.phclin.2018.10.054.
Дисертації з теми "Diffusion Raman Exaltée de Surface (DRES)":
Rahmani, Meryem. "Analyses Raman multispectrales exaltées pour la détection de molécules sous forme de trace." Electronic Thesis or Diss., Le Mans, 2024. http://www.theses.fr/2024LEMA1004.
In recent decades, the use of phytosanitary products commonly called pesticides has increased. These substances have become increasingly present in our environment, accumulating in soil, air and water. Even at very low concentration these products represent a danger to human, plant and animal health. For all these reasons it is important to regulate the use of phytosanitary products by prohibiting the use of certain of these substances and by strengthening regulations to set Maximum Residue Limits (MRLs) as low as possible. It is also necessary to develop new methods for detecting and identifying trace pollutants because conventional techniques require large laboratory capabilities which are not compatible with on-site analyses.In my PhD. work, we have used Surface Enhanced Raman Scattering (SERS) to detect and identify trace molecules. We studied and analyzed the performance of three commercial DRES substrates (Hamamatsu, SERSitive and Ocean Insight) for the detection and identification of a model molecule at concentrations of the order of 10-6 M and 10-8 M. We compared the Raman responses from the Raman maps recorded on their surfaces at two incident wavelengths. We have also developed and optimized efficient nanorough metallic substrates to detect and identify molecules with a detection limit of 10-9 M. We will present the experimental protocol used to fabricate our nanorough gold substrates. The topographical properties of the surfaces were studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM) to better understand the reason of SERS properties of the substrates. The optical responses of our nanorough substrates were studied in the near field by electron photoemission (PEEM) and in the far field by Raman spectrometry after putting them in contact with solutions containing molecules at very low concentrations. We compared the spectral response, intensity distributions, and stability under laser beam, of gold nanorough substrates and the most efficient substrate among the three commercial DRES substrates by analyzing the Raman spectra at a concentration of 10-8 M.The stability of the Raman response of the commercial SERS substrates and our optimized nanorough substrates was studied over time, for a period of several months. The effectiveness of the substrates decreases over time and it is no longer possible to detect the presence of the molecules after several months. In my PhD work we have tested a method that makes it possible to improve the Raman performance of these aged substrates. The performance of these improved substrates was studied by analyzing Raman intensity distributions from imaging containing several hundred spectra. Finally, we used the gold nanorough substrates to detect molecules present in a binary mixture of model molecules at a concentration of 10-8 M. We analyzed the Raman maps using chemometric tools, namely Component Analysis. Principal (ACP), and Multivariate Curve Resolution (MCR)
Aybeke, Ece Neslihan. "Study of the dynamics of biomolecules by high speed atomic force microscopy and surface enhanced Raman spectroscopy." Thesis, Dijon, 2015. http://www.theses.fr/2015DIJOS023/document.
This thesis focuses on the coupling of High–Speed Atomic Force Microscopy (HS-AFM) and Surface Enhanced Raman Spectroscopy (SERS) for biomolecule analysis. We have designed a fabrication protocol to manufacture “SERS-active” substrates. The efficacy of gold, silver and gold-silver bimetallic crystalline nanoparticle substrates were evaluated. We have investigated the impact of optical and morphological features of the substrates on Raman signal intensity by analyzing well-known samples such as bipyridine ethylene and methylene blue molecules. We took an interest in three distinct biological problematics with HS-AFM and SERS analyses. First, we have detected the chemical signature of cytochrome b5 protein. This study was followed by the investigation of conformational changes of small heat shock leuconostoc oenos Lo 18 protein in function of pH level and concentrations. The last application consists to the analyse a membrane and a virus interaction. In order to realize simultaneous Raman/AFM analysis, we have adapted our fabrication protocol to cover the surface of commercial AFM probes by crystalline gold nanoparticles. Tip – Enhanced Raman Spectroscopy (TERS) studies were performed on molybdenum disulfide to evaluate the quality of TERS probes. In the last part of this work, we have designed a new setup to combine Ando’s HS-AFM setup with Raman spectroscopy. We present the modifications that have been carried out and the challenges that we have encountered
Delhaye, Caroline. "Spectroscopie Raman et microfluidique : application à la diffusion Raman exaltée de surface." Thesis, Bordeaux 1, 2009. http://www.theses.fr/2009BOR13927/document.
This thesis focuses on the development of a microfluidic platform coupled with confocal Raman microscopy, used in excitation conditions of Raman scattering (Surface enhanced Raman scattering, SERS) in order to gain in the detection sensitivity of molecular species flowing in channels of micrometer dimensions. This work aims to demonstrate the feasibility of coupling Raman microscopy / microfluidics for the in situ and local characterization of species and reactions taking place in the fluid flowing in microchannels. We used a T-shaped microchannel, made by soft lithography, in which gold or silver nanoparticles injected at constant speed, in one of the two branches of the channel and a solution of pyridine or pefloxacin in the other one. The laminar flow and the stationarity of the process allowed us to map the mixing zone and highlight the enhancement of the Raman signal of pyridine and pefloxacin, due to the metallic nanoparticles, in the interdiffusion zone. The recording of the both absorption band of the silver nanoparticles (plasmon band) and the Raman signal of pefloxacin, flowing in microchannel, allowed us to establish a link between the shape of the metallic nanostructure, and more precisely the silver nanoparticle aggregation state, and the enhancement of the Raman signal of pefloxacin observed. We then changed the channel geometry to introduce an electrolyte solution (NaCl and NaNO3) and locally modify the surface charge of the colloids. We have put in evidence that the change of the silver nanoparticle aggregation state, induced by the controlled addition of electrolyte solutions, could amplify the SERS signal of pefloxacin and thus optimizing the detection in microfluidics. At last, we established second a approach that consists in the metallic structuring of microchannel walls. This has shown that the surface chemical functionalization through organosilanes (APTES) allowed the pasting of the channel with silver nanoparticles, thus amplifying the Raman signal of the species flowing within the same microchannel
Julien, Carine. "Fluorescence et Diffusion Raman exaltée de surface (SERS) de molécules individuelles." Phd thesis, Université Paris Sud - Paris XI, 2004. http://tel.archives-ouvertes.fr/tel-00011564.
Par microscopie grand champ de fluorescence, l'émission de molécules uniques de pérylène orange insérées dans un film solgel mince, par enregistrement de films d'une large zone de l'échantillon sur laquelle plus d'une centaine d'émetteurs individuels sont détectés, fournit des informations sur cette espèce et la matrice sondée. Pour exploiter les films, un outil logiciel a été développé. Les processus de photoblanchiment, la mobilité moléculaire, la nucléation des molécules excitées sont mis en évidence et discutés. On note une grande richesse des dynamiques temporelles d'émission, mais aussi des spectres qui reflètent notamment la reconformation proposée du pérylène orange excité. Il s'ensuit l'existence de nombreux nanoenvironnements différents dans la matrice poreuse.
Par microscopie confocale à balayage, le signal de diffusion Raman exaltée de surface de molécules uniques organique adsorbées sur des agrégats d'argent de morphologie complexe est exploité. Certains objets présentent une exaltation géante, estimée être de plus de 14 ordres de grandeur, ce qui permet l'enregistrement de spectres résolus en seulement une seconde. L'analyse chimique offerte permet de distinguer différentes espèces, et la présence nécessaire sur ces points chauds d'Ag+ est démontrée. Une caractérisation corrélée par microscopie électronique des agrégats actifs repérés met aussi en avant l'existence d'une morphologie privilégiée, avec de nombreuses protubérances de dimension nanométrique et interstices.
Edely, Mathieu. "Etudes de surfaces métalliques nanolithographiées : application à la diffusion Raman exaltée de surface." Thesis, Le Mans, 2016. http://www.theses.fr/2016LEMA1020.
Since the first observation of Surface Enhanced Raman Scattering (SERS) in 1974 a variety of methods have been developed to physically control the arrangement of metallic nanostructures onto a surface in order to enhance Raman signals. The magnitude of the SERS enhancement factor is mainly driven by the enhanced local electromagnetic field in nanostructured metal surfaces. Gaps between adjacent nanoparticles give rise to strong enhancement effects, often referred as ‘hot spots’. One way to produce highly efficient SERS substrates is to develop a reproducible system of interacting metal nanostructures capable of high field enhancement.We patented a force-assisted Atomic Force Microscopy lithographic method allowing the fabrication of a metallic substrate. It will be shown that this method also provides a relatively simple approach to realize reproducible patterns with controlled geometry that can be used to study the influence of specific pattern geometry on SERS phenomenon.In order to investigate the relationship between optical properties and pattern geometries, localized surface plasmon resonance (LSPR) and local electric field enhancement are simulated.Whereas electric field enhancement regions (hot spot) have been observed on the top of the nanostructures with PhotoEmission Electron Microscopy (PEEM), SERS effect has been demonstrated by performing Raman measurements using several probe molecules. Correlations between PEEM measurements, Raman exaltation and local field calculations are presented in relation with the geometrical parameters of the nanostructured patterns
Billot, Laurent. "Etude de nanoparticules métalliques par Diffusion Raman Exaltée de Surface et champ proche optique." Troyes, 2005. http://www.theses.fr/2005TROY0011.
The aim of this PHD is to study gold nanoparticles by extinction spectroscopie, Surface Enhanced Raman Scattering (SERS) and Near-field optic. The extinction measurements on such particles designed by electronic beam lithography have given evidence of the particle shape effect on the Plasmon resonance position. We have also observed the existence of multipolar Plasmon resonance on elongated nanoparticles. The SERS efficiency of nanoparticles has been investigated by deposing several different molecular probes (BPE, rhodamine 6G and benzoïc acid). The observation of the dependence of the Raman enhancement versus the nanoparticle length is clearly demonstrated and remarkably a maximum enhancement is observed for a specific length. For such particles, we also show clearly that a multipolar localized surface plasmon modes exhibites a stronger efficiency than the first dipolar order. We have studied the nanoparticles by Near-Field Optical Microscopy. We reported on one artefact related to the error signal in cantilever vibration amplitude of the illumination beam and is insidious because it can produce sub-diffraction limited optical features that actually have no correlation with the true optical Near-Field. To conclude, we also present some first results on one new kind of tip applied to Raman Near-Field spectroscopy
Grimault, Anne-Sophie. "Modélisation du champ proche de structures résonantes 3D : application à la diffusion Raman exaltée de surface." Troyes, 2006. http://www.theses.fr/2006TROY0006.
We studied the position of the localized surface plasmon resonance and the surface enhanced Raman scattering of periodic arrays of metallic nanostructures with different size, form and environment. To calculate localized surface plasmon resonance and the Raman gain, we developed a numerical code based on the finite difference time domain method using the Drude-Lorentz dispersion model. Our results highlighted a strong influence of the geometry and environment of the nanoparticles on their resonance plasmon and their Raman signal. We observed dipolar and multipolar plasmon mode resonances as well as a shift between the position of the Plasmon resonance and the position of the maximum of the intensity of the Raman signal, whatever the size and the form of the nanoparticles. This numerical tool can thus make it possible to optimize manufacture of samples, by giving the parameters of size, form and environment necessary to achieve the most intense Raman signals
Le, Nader Victor. "Approche expérimentale et théorique de la diffusion Raman exaltée : résonance des plasmons de surface et effet de pointe." Phd thesis, Université de Nantes, 2010. http://tel.archives-ouvertes.fr/tel-00559365.
Grand, Johan. "Plasmons de surface de nanoparticules : spectroscopie d'extinction en champs proche et lointain, diffusion Raman exaltée." Troyes, 2004. http://www.theses.fr/2004TROY0014.
The intrinsic weakness of the Raman process makes its application in a near field optical experiment rather difficult. Thus, as a first step towards near field Raman spectroscopy, we studied Surface-Enhanced Raman Scattering (SERS), a technique that enables the detection of very low concentration of molecules adsorbed on rough metallic surfaces. For the purpose of the near field experiments, these SERS-active samples have to be reproducible and yield good enhancement factors. By designing metallic nanoparticle grating through electron beam lithography, we manage to vary the shape, size and arrangement of the particles, hence enabling a fine tuning of the Localized Surface Plasmon Resonance (LSPR) over the whole visible spectrum. We then investigate the relationship between the spectral position of the LSPR and the SERS intensity. The enhancement factor turned out to depend not only on the spectral position of the LSPR, but also on the shape of the metallic nanoparticles on which the surface plasmon is localized. In the same time, we build up an Apertureless Scanning Near Field Optical Microscope (ASNPM) set-up. The microscope is based on an atomic force microscope and a confocal detection coupled to a spectrometer. The near field/far field discrimination is achieved through the use of a lock-in detection of a photon counting device. Using this set-up along with a white light continuum, generated by coupling a Photonic Crystal Fiber to a Ti:Sa laser, made it possible to investigate the near field optical response of metallic nanoparticle gratings at different excitation wavelengths. A photon counting scheme was then used to directly record near field “extinction” spectra
Prado, Enora. "Détection de l’ADN par spectrométrie de diffusion Raman exaltée de surface couplée à la microfluidique." Thesis, Bordeaux 1, 2011. http://www.theses.fr/2011BOR14348/document.
This work deals with the development of an original label-free method for free bases proportions detection and quantification of nucleic acids. The surface enhanced Raman spectroscopy (SERS) allowed obtaining the specific spectral signature of characteristic nucleotides of RNA (adenosine, cytosine, guanosine and uridine), using silver colloids as SERS substrate and MgCl2 addition as aggregating agent. Then, the condition detection have optimizing to establish a label-free quantification protocol of free nucleobases proportion by SERS spectroscopy. The detection limits obtained are order of few picomoles. The reproducibility improvement of SERS detection requires the precise control of time reaction (adsorption and aggregation), which could be control thanks to microfluidic chips use. We have implemented two different microfluidic chips, one based on single-phase flows and one other based on droplets generation. The analyzed species are containing in droplets, allowing in situ detection by spectroscopy SERS of various nucleotides