Книги з теми "Device of testing"

Schroder, Dieter K. Semiconductor material and device characterization. Hoboken, N.J: John Wiley, 2005.

Semiconductor material and device characterization. 2nd ed. New York: Wiley, 1998.

Semiconductor material and device characterization. New York: Wiley, 1990.

Semiconductor material and device characterization. 3rd ed. [Piscataway, NJ]: IEEE Press, 2006.

Schroder, Dieter K. Semiconductor Material and Device Characterization. New York: John Wiley & Sons, Ltd., 2006.

Hebner, R. E. Report of tests on Joseph Newman's device. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1986.

Jywe, W. A computer-aided accuracy testing device for machine tools. Manchester: UMIST, 1992.

C, Church James. Device for in situ measurement of coal cutting forces. Avondale, Md: U.S. Dept. of the Interior, Bureau of Mines, 1985.

Pappas, Deno M. Evaluation of a punch shear test device. Phg [Pittsburgh], PA: U.S. Dept. of the Interior, Bureau of Mines, 1990.

Mulroy, William J. Evaluation of a standard device for calibrating calorimeter test rooms. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1986.

Chim, Wai Kin. Semiconductor device and failue analysis: Using photon emission microscopy. Chichester, [England]: Wiley, 2000.

Semiconductor device and failue analysis: Using photon emission microscopy. Chichester, [England]: Wiley, 2000.

Mulroy, William J. Evaluation of a standard device for calibrating calorimeter test rooms. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1986.

Branch, Ontario Water Resources. The design and testing of a large propeller driven aeration device for reservoir use. [Toronto?]: Queen's Printer, 1991.

Joshi, Sanjay Kumar. Development of a disposable direct-readout device for sensitivity testing and microbiological drug assay. Manchester: University of Manchester, 1994.

Moilanen, Pekka. Pneumatic servo-controlled material testing device capable of operating at high temperature water and irradiation conditions. Espoo [Finland]: VTT Technical Research Centre of Finland, 2004.

Riemer, Michael. Development and validation of the downhole freestanding shear device (DFSD) for measuring the dynamic properties of clay. Sacramento, CA: California Dept. of Transportation, Division of Research and Innovation, 2008.

Vercimak, Sutton Charmaine, ed. Validation for medical device and diagnostic manufacturers. 2nd ed. Buffalo Grove, Ill: Interpharm Press, 1998.

Vercimak, Sutton Charmaine, ed. Validation for medical device and diagnostic manufacturers. 2nd ed. Buffalo Grove, IL: Interpharm Press, 1994.

Livesay, Ed. Design, creation, and proper use of a drag device for the determination of drag factor. Jacksonville, Fla: Institute of Police Technology and Management, University of North Florida, 1999.

Ya'acov, Rand, and Hoffman Mildred B, eds. The dynamic assessment of retarded performers: The learning potential assessment device, theory, instruments, and techniques. Glenview, Ill: Scott, Foresman, 1985.

Symposium, on Spinal Implants Are We Evaluating Them Appropriately? (2001 Dallas Tex ). Spinal implants: Are we evaluating them appropriately? West Conshohocken, PA: ASTM International, 2003.

H.R. 1346, the Medical Device Safety Act of 2009: Hearing before the Subcommittee on Health of the Committee on Energy and Commerce, House of Representatives, One Hundred Eleventh Congress, first session, May 12, 2009. Washington: U.S. G.P.O., 2011.

Jonathan, Kendler, and Yale Allison S, eds. Usability testing of medical devices. Boca Raton: Taylor & Francis, 2011.

Investigations, United States Congress House Committee on Energy and Commerce Subcommittee on Oversight and. Direct-to-consumer genetic testing and the consequences to the public health: Hearing before the Subcommittee on Oversight and Investigations of the Committee on Energy and Commerce, House of Representatives, One Hundred Eleventh Congress, second session, July 22, 2010. Washington: U.S. Government Printing Office, 2013.

Hunter, H. J. Developmental airdrop testing techniques and devices. Neuilly sur Seine, France: AGARD, 1987.

Trapp, D. J. Safety testing of industrial radiography devices. Washington, DC: Division of Industrial and Medical Nuclear Safety, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 2000.

Doody, Michael E. Nondestructive testing of load-transfer devices. Albany, N.Y: Engineering Research and Development Bureau, New York State Dept. of Transportation, 1992.

Kate, Davis, Liu Margaret B, and Duke Clinical Research Institute, eds. A clinical trials manual from the Duke Clinical Research Institute: Lessons from a horse named Jim. 2nd ed. Chichester, West Sussex: Wiley-Blackwell, 2010.

FDA medical device approval: Is there a better way? : hearing before the Subcommittee on Health Care, District of Columbia, Census, and the National Archives of the Committee on Oversight and Government Reform, House of Representatives, One Hundred Twelfth Congress, first session, June 2, 2011. Washington: U.S. G.P.O., 2011.

Kang, Tʻae-gŏn. Ŭiryo kigi imsang sihŏm kyoyuk kigwan kyoyuk pʻŭrogŭraem kaebal mit unyŏng hyangsang pangan maryŏn =: Development of educational program for medical device clinical trial specialists and enhancement of education management. [Seoul]: Hanʼguk Pogŏn Sanŏp Chinhŭngwŏn, 2007.

Sharma, Ashok K. Semiconductor memories: Technology, testing, and reliability. Piscataway, N.J: IEEE Press, 1997.

Safety evaluation of medical devices. New York: Marcel Dekker, 1997.

Safety evaluation of medical devices. 2nd ed. New York: M. Dekker, 2002.

Putorti, Anthony D. Design parameters for stack-mounted light extinction measurement deveices [i.e. devices]. Gaithersburg, MD: U.S. Department of Commerce, Technology Administration, National Institute of Standards and Technology, 1999.

Putorti, Anthony D. Design parameters for stack-mounted light extinction measurement deveices [i.e. devices]. Gaithersburg, MD: U.S. Department of Commerce, Technology Administration, National Institute of Standards and Technology, 1999.

Putorti, Anthony D. Design parameters for stack-mounted light extinction measurement deveices [i.e. devices]. Gaithersburg, MD: U.S. Department of Commerce, Technology Administration, National Institute of Standards and Technology, 1999.

Workshop for American Indian Educators on the Learning Potential Assessment Device and Instrumental Enrichment Programs (1982 Shiprock, N.M.). To sing our own songs: Cognition and culture in Indian education : report from a Workshop for American Indian Educators on the Learning Potential Assessment Device and Instrumental Enrichment Programs, Shiprock, Navajo Nation, New Mexico. New York: Association on American Indian Affairs, 1985.

Testing semiconductor memories: Theory and practice. Chichester: J. Wiley & Sons, 1991.

United States. Congress. House. Committee on Energy and Commerce. Subcommittee on Oversight and Investigations. FDA's drug and device review process: Hearing before the Subcommittee on Oversight and Investigations of the Committee on Energy and Commerce, House of Representatives, One Hundred Second Congress, second session, February 6, 1992. Washington: U.S. G.P.O., 1992.

Testing fluid power components. New York, N.Y: Industrial Press, 1990.

Michael, Engelhardt, ed. Advanced production testing of RF, SoC, and SiP devices. Norwood, MA: Artech House, 2007.

Yang, Fuqian, and James C. M. Li, eds. Micro and Nano Mechanical Testing of Materials and Devices. Boston, MA: Springer US, 2008. http://dx.doi.org/10.1007/978-0-387-78701-5.

Adams, R. Dean. High performance memory testing: Design principles, fault modeling, and self-test. Boston: Kluwer Academic, 2003.

IEEE International Workshop on Memory Technology, Design, and Testing (1998 San Jose, California). Memory technology, design and testing: Proceedings : International Workshop on Memory Technology, Design, and Testing. Los Alamitos, California: IEEE Computer Society Press, 1998.

Bielawa, Richard L. Analytic investigation of helicopter rotor blade appended aeroelastic devices. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1988.

Handschuh, Robert F. Experimental testing of prototype face gears for helicopter transmissions. [Washington, DC: National Aeronautics and Space Administration, 1992.

Lewicki, David G. Full-scale transmission testing to evaluate advanced lubricants. [Washington, DC]: National Aeronautics and Space Administration, 1992.

Lewicki, David G. Full-scale transmission testing to evaluate advanced lubricants. [Washington, DC]: National Aeronautics and Space Administration, 1992.

E, Dornes, Cutshall W, Gonzalez M, U.S. Nuclear Regulatory Commission. Division of Industrial and Medical Nuclear Safety., and Southwest Research Institute, eds. Sealed sources and device design safety testing. Washington, DC: Division of Industrial and Medical Nuclear Safety, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 1994.