Добірка наукової літератури з теми "Dentin bonding adhesive system"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Dentin bonding adhesive system".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Dentin bonding adhesive system"
Kakar, Surbhi, and Rohit Nagar. "Dentin Bonding Agents-II Recent Trials." World Journal of Dentistry 3, no. 1 (2012): 115–18. http://dx.doi.org/10.5005/jp-journals-10015-1140.
Повний текст джерелаBrkanović, Sandra, Eva Klarić Sever, Josipa Vukelja, Anja Ivica, Ivana Miletić, and Silvana Jukić Krmek. "Comparison of Different Universal Adhesive Systems on Dentin Bond Strength." Materials 16, no. 4 (February 12, 2023): 1530. http://dx.doi.org/10.3390/ma16041530.
Повний текст джерелаDutra, Daniel JB, Natalia TT Branco, Hugo H. Alvim, Cláudia S. Magalhães, Ricardo R. Oliveira, and Allyson N. Moreira. "Bond strength of two universal adhesive systems to human dentin using different strategies." Acta Odontológica Latinoamericana 35, no. 3 (December 19, 2022): 155–63. http://dx.doi.org/10.54589/aol.35/3/155.
Повний текст джерелаFernandes Pegado, Rafael Eduardo, Flávia Lucisano Botelho do Amaral, Flávia Martão Flório, and Roberta Tarkany Basting. "Effect of Different Bonding Strategies on Adhesion to Deep and Superficial Permanent Dentin." European Journal of Dentistry 04, no. 02 (April 2010): 110–17. http://dx.doi.org/10.1055/s-0039-1697818.
Повний текст джерелаSami, Omnia M., Essam A. Naguib, Rasha H. Afifi, and Shaymaa M. Nagi. "Effect of Different Adhesion Protocols on the Shear Bond Strength of Universal Adhesive Systems to Sound and Artificial Caries-Affected Dentin." European Journal of General Dentistry 10, no. 01 (January 2021): 030–36. http://dx.doi.org/10.1055/s-0041-1732776.
Повний текст джерелаBettiol, Henrique EG, Waldemir F. Vieira-Junior, Fabiana MG França, Flávia LB Amaral, and Roberta T. Basting. "Bonding strategy of a universal adhesive system containing chitosan: influence on dentin permeability, and effect on adhesive layer micromorphology." Acta Odontológica Latinoamericana 35, no. 3 (December 19, 2022): 206–13. http://dx.doi.org/10.54589/aol.35/3/206.
Повний текст джерелаZivkovic, Slavoljub, Mila Kolar, Larisa Blazic, Mirjana Vucetic, and Goran Tosic. "Smear layer on dentin in restorative dentistry." Serbian Dental Journal 51, no. 4 (2004): 169–76. http://dx.doi.org/10.2298/sgs0404169z.
Повний текст джерелаLi, J., B. Chen, N. Hong, S. Wu, and Y. Li. "Effect of Baicalein on Matrix Metalloproteinases and Durability of Resin-Dentin Bonding." Operative Dentistry 43, no. 4 (July 1, 2018): 426–36. http://dx.doi.org/10.2341/17-097-l.
Повний текст джерелаKoliniotou-Koumpia, Eugenia, Pantelis Kouros, Lazaros Zafiriadis, Effimia Koumpia, Pavlos Dionysopoulos, and Vassilis Karagiannis. "Bonding of adhesives to Er:YAG laser-treated dentin." European Journal of Dentistry 06, no. 01 (January 2012): 016–23. http://dx.doi.org/10.1055/s-0039-1698926.
Повний текст джерелаMarimoto, AK, LA Cunha, KCK Yui, MFRL Huhtala, DC Barcellos, A. Prakki, and SEP Gonçalves. "Influence of Nd:YAG Laser on the Bond Strength of Self-etching and Conventional Adhesive Systems to Dental Hard Tissues." Operative Dentistry 38, no. 4 (June 1, 2013): 447–55. http://dx.doi.org/10.2341/11-383-l.
Повний текст джерелаДисертації з теми "Dentin bonding adhesive system"
Sene, Fabio. "Análise da qualidade da interface adesiva dentinária produzida por diferentes sistemas adesivos, aplicados \'in vivo\' e \'in vitro\'." Universidade de São Paulo, 2004. http://www.teses.usp.br/teses/disponiveis/25/25131/tde-21082009-111925/.
Повний текст джерелаThe aim of this research was to analyze in Light Microscopy (LM), micro-Raman Spectroscopy (µR) and Scanning Electron Microscopy (SEM), the dentin-adhesive interface produced by three different bonding systems applied in vivo and in vitro. In in vivo condition patients with the first upper premolars, to be extract for orthodontic reasons, were used. Class I cavities with 0.5mm below the dentin-enamel junction were performed, with carbide bur in high speed. Following, three different bonding systems were applied in accordance with their manufacturer instruction: Single Bond (SB-3M), Clearfil SE Bond (CSEB-KURARAY) and One Up Bond-F (OUBTokuyama), and the cavities restored, incrementally, with composite resin TPH Spectrum (Dentsply). After restoration the teeth were extracted and stored in 0,1% tymol solution. In vitro, the same procedures were performed in extracted upper premolars. Following, the teeth were taken to a cutting machine and cross-sectioned with as diamond saw in specimens with 2mmX2mmx6mm dimensions, being 2 specimens for each tooth. One of the specimen was taken to a hard tissue microtome were 5µm slabs were obtained and stained with Goldner´s Tricrome. The slabs were analyzed in a Light Microscope with 100 times magnification. In this technique, the mineralized dentin is stained green, the collagen is stained red and the bonding system a pale orange. After, the same specimen was used for micro-Raman analysis. The adjacent specimen was dehydrated in ascendant ethanol sequence and analyzed in scanning electron microscopy. The LM results for SB showed the presence of a large area stained red for both conditions, indicating the presence of exposed or non protected collagen by the bonding system. This area was larger in vivo than in vitro. For CSEB this layer war purple stained and consistent along the interface for both situations, indicating, also, collagen available to react with the staining. For OUB this layer was also purple however, in vivo, this layer was thinner and inconsistent than in vitro. In SEM analysis, SB bonding system presented a porous hybrid layer for both situations. In vitro this layer was thicker and regular along the interface and, in vivo, thinner and irregular. Big differences were observed related to the resin tags. In vivo they were thinner and shorter. For CSEB the hybrid layer was thinner when compared with SB however, more homogeneous and compact along the interface for both situations. Big differences were observed related to the resin tags. In vivo, they were significantly in fewer amounts, shorter and thinner. For OUB in vitro, the hybrid layer was thin, however, homogeneous and with long tags. In vivo, the hybrid layer was very thin, almost undetectable. The resin tags were almost non-existent or bended due to poor polymerization of this system. In micro-Raman analysis for SB showed a greater contribution of the bonding system in the first two micrometers of the interface was detected and, in the rest of the interface, there was few contribution of the resin monomers in the collagen protection. For CSEB the interface was thin (1µm), for both conditions, however, with contribution, in the hybridized complex, of the adhesives components, collagen and mineral. For OUB in vitro, the spectras also indicated the presence of a thin interface, among 1µm, but also, with contribution of the bonding components, collagen and mineral. In vivo, the interface could not be detected by the Raman, for being inexistent, or by the fact to be thinner than the Raman resolution (1µm). After all these analysis of the bonding interface, for both conditions, and with these different bonding systems, it can be concluded that: in vivo condition produced a less-quality interface for all the system. CSEB apparently produced a better-quality interface and OUB the worst. The use of these three techniques together allowed a complete analysis, qualitative and quantitative, of the dentin-bonding interface produced by these three bonding systems, for both situations.
Sá, Renata Bacelar Cantanhede de 1981. "Estudo da união dentina-sistemas adesivos que não contém HEMA = avaliação do selamento dentinário, micropermeabilidade e da resistência de união à dentina imediata e à longo prazo = Adhesion study of dentin-HEMA-free adhesive systems : evaluation of dentin sealing, micropermeability and immediately and long-term dentin bond strength." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/287799.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-28T03:49:14Z (GMT). No. of bitstreams: 1 Sa_RenataBacelarCantanhedede_D.pdf: 1663244 bytes, checksum: ddbd6a5d390052ef93aca63cbdf510ab (MD5) Previous issue date: 2015
Resumo: Este estudo avaliou o efeito de agentes cross-linking e a utilização de sistemas adesivos (SA) que não contém o monômero HEMA. No capítulo 1 foram avaliadas a resistência de união (RU) e o selamento dentinário (SD) após 24 horas e 6 meses de armazenamento em água. Para RU, foram avaliados 4 SA: um autocondicionante e um convencional contendo o monômero HEMA (Scotchbond Universal/SU e Prime & Bond Elect/PB), um autocondicionante e um convencional sem HEMA (G-Aenial/GA e All-Bond 3/AB) respectivamente. Cada SA foi subdividido em grupos baseados na biomodificação da dentina: controle (sem aplicação de agentes cross-linking), glutaraldeído 5% e proantocianidina 6,5% (PA). Após a aplicação dos adesivos com ou sem o uso de agentes cross-linking e aplicação do compósito, os dentes foram seccionados para obtenção de espécimes, os quais foram avaliados com o teste de microtração. O agente cross-linking que produziu os melhores resultados (PA) foi selecionado para o estudo de SD. Os espécimes foram preparados da mesma forma como descrito anteriormente. As mensurações de permeabilidade dentinária (PD) foram realizadas com a simulação da pressão pulpar através de uma coluna de água de 140 cm em 5 tempos (PD mínima: P min, PD máxima: P máx, PD após o uso do PA: PPA, PD após aplicação dos SA: PSA e PD após 6 meses: Parmazenado). Para o grupo controle, a mensuração difere na remoção da etapa correspondente a PPA, continuando com PSA e Parmazenado, respectivamente. No capítulo 2 foram avaliadas a RU, SD e micropermeabilidade de 4 SA: um convencional contendo HEMA (Adper Single Bond 2/SB), um adesivo de 3 passos que não contem HEMA no solução adesiva hidrófoba (AB) e dois autocondicionantes sem HEMA (GA e BeautiBond/BB). Os dentes foram preparados da mesma forma descrita no primeiro capítulo. A micropermeabilidade foi avaliada através da infiltração do corante amarelo de lúcifer na camada híbrida. Todas as metodologias foram avaliadas após 24 horas e 1 ano de armazenamento em saliva artificial. As mensurações de SD foram expressas em %. Os dados foram analisados com metodologia de modelos mistos para medidas repetidas para o primeiro capítulo e ANOVA 2 fatores e teste de Tukey (?=0,05). A RU produzida por PB, SU e AB não apresentou diferença entre eles e GA apresentou os menores valores em 24 horas. Todos SA apresentaram maiores RU com a aplicação do agente cross-linking PA em 24 horas, independentemente de possuírem HEMA na composição. Após armazenamento por 6 meses, SU e AB apresentaram redução da RU. PA e SA reduziram a permeabilidade da dentina e da interface dentina-resina, respectivamente. No segundo capítulo, AB apresentou maior RU seguido de SB e dos autocondicionantes (BB e GA) em 24 horas. GA apresentou o menor valor de RU após um ano, pois teve redução com o armazenamento. No SD em 24 horas, SB e AB selaram a dentina como a Pmin, enquanto BB não apresentou a mesma capacidade, porém manteve-se estável por um ano. Na avaliação da micropermeabilidade, ausência do HEMA não influenciou os resultados. Os resultados sugerem que a aplicação apenas do agente cross-linking PA pode produzir o selamento da dentina e aumentar a RU. Na segunda parte do estudo, o adesivo AB mostrou os melhores resultados nas análises de RU, SD e micropermeabilidade
Abstract: This study evaluated the effects of cross-linking agents and adhesive systems (AS) that not contain the monomer HEMA. In the chapter 1 the microtensile bond strength (BS) and dentin sealing (DS) after 24 hours and 6 months of water storage were evaluated. For BS teste, 4 groups AS were evaluated: a self-etch and one total-etch HEMA-containing adhesives (Scotchbond Universal/SU and Prime & Bond Elect/PB), one self-etch and one total-etch HEMA-free adhesives (G-Aenial/GA and All-Bond 3/AB). Each AS was divided into sub-groups based on dentin biomodification: control (no cross-linking agent application), 5% glutaraldehyde and 6.5% proanthocyanidin (PA). After adhesives application with or not cross-linking agent use, teeth were sectioned to obtain specimens, which were evaluated in microtensile bond strength test. The most promising dentin biomodification strategy (PA) was selected for DS study. The specimens were prepared in the same way as previous described. Permeability (PD) measurements study was carried out using a simulated pulpal pressure of 140 cm water column at 5 times of evaluation (minimum PD: Pmin, maximum PD: Pmax, PD after PA: PPA, PD after AS application: PAS and PD after 6 months: Pstored). For the control group, the measurements differ from PPA removal, continuing with PAS and Pstored, respectively. In the chapter 2, BS, DS and micropermeability of 4 AS: one total-etch HEMA-containing (Adper Single Bond 2/SB), one three-step etch-and-rinse adhesive that does not contain HEMA in hydrophobic solution (AB) and two self-etch HEMA-free (GA and BeautiBond/BB). The teeth were prepared in the same way as described in the chapter one. For micropermeability analysis the yellow lucifer was used and detected its penetration into the hybrid layer. All methods were tested after 24 hours and after 1 year of artificial saliva storage. DS measurements were expressed as %. The data were submitted to multiple comparisons using PROC MIXED for chapter one and two-way ANOVA and by Tukey¿s test (?=0.05) for chapter two. The BS of PB, SU and AB did not differ among them and GA showed the lowest values at 24 hours. PA cross-linking agent increased the BS for all at 24 hours, regardless the presence of HEMA. Storage for 6 months significantly decreased the BS for SU and AB. PA and AS decrease the permeability of the dentin and dentin-resin interface, respectively. In the chapter two, AB showed the highest values BS followed by SB and self-etch adhesives (BB and GA) at 24 hours. GA showed the lowest BS after one year because it was reduced. For DS, SB and AB sealed the dentin as Pmin, while BB and did not present the same ability, however kept stable after one year. The micropermeability revealed that the absence of HEMA did not influence the outcomes. Results suggested that PA cross-linking application alone was able to seal the dentin and increase the BS. In the second chapter, AB adhesive showed the best results in BS, DS and micropermeability analyses
Doutorado
Materiais Dentarios
Doutora em Materiais Dentários
2011/11415-1, BEPE 2013/02386-3
FAPESP
Guimarães, Isadora Rabêlo 1985. "Interaction effect between multi-mode adhesive systems and dual/chemical curing resin cements on dentin bonding = O efeito da interação de sistemas adesivos multi-mode e cimentos resinosos de polimerização química e dual na adesão à dentina." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288149.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-27T03:34:21Z (GMT). No. of bitstreams: 1 Guimaraes_IsadoraRabelo_D.pdf: 1408417 bytes, checksum: 663b3f486f91d8f3589f07a988f8ba2c (MD5) Previous issue date: 2015
Resumo: O objetivo deste estudo foi avaliar o efeito da interação de sistemas adesivos multi-mode e cimentos resinosos de polimerização química e dual sobre a superfície da dentina. Quarenta terceiros molares humanos não cariados foram separados em 5 grupos (n=8). Uma superfície plana em dentina foi obtida para cada dente. Blocos de 3,0x12x12 mm de resina composta indireta (Lava Ultimate) foram jateados com partículas óxido de alumínio e cimentados na superfície de dentina, formando os seguintes grupos: I- All Bond Universal fotoativado (AB)/C&B Bond Cement (CB); II- Scotchbond Universal fotoativado (SBU)/RelyXUltimate químico (RXU); III- SBU fotoativado/RXU fotoativado, IV- SBU químico/RXU fotoativado, V- SBU químico /RXU químico. Após a cimentação, os dentes foram mantidos em umidade relativa a 37?C por 24 horas. Os dentes foram seccionados para obter palitos de aproximadamente 0,8 mm². Os espécimes foram posicionados na máquina de ensaio universal EZ-Test para o ensaio de resistência de união com uma velocidade de 0,5 mm/min. Os dados foram estatisticamente analisados por ANOVA um fator e Teste de Fisher's PLSD (?=0,05). Os modos de fratura foram analisados e classificados em microscópio eletrônico de varredura. Para análise das interfaces dentina/adesivo/cimento, cinco espécimes de cada grupo foram corados com Rodamina B a 1% por uma hora e analisados em microscópio confocal de varredura a laser. Nenhuma diferença estatística de resistência da união (MPa) foi observada entre os grupos: I- 59,9 (9,3); II- 57,6 (15,9); III- 63,9 (12,7) e IV- 53,7 (13,9), e todos foram diferentes estatisticamente do grupo V, que apresentou o menor valor de resistência da união 16,2 (6,4). O modo de fratura coesivo foi predominante na interface entre o adesivo e cimento resinoso em todos os grupos. A análise ultraestrutural sugere a interação entre os sistemas adesivos multi-mode e o cimento resinoso na dentina, quando o adesivo ou o cimento resinoso foi fotoativado. A interação adesiva ocorreu entre os adesivos multi-mode e cimentos resinosos, sempre que o adesivo e/ou o cimento resinoso foi fotoativado
Abstract: This study evaluated the dentin surface interaction effect of multi-mode adhesives on bonding to chemical-cured and dual-cured resin cements. Forty non-carious human third molars were divided into five groups (n=8). A flat dentin surface was created for each tooth. Indirect resin composite block 3,0x12x12 mm (Lava Ultimate) were sandblasted with aluminum oxide particles and cemented to the dentin surface following the treatment groups: I- All Bond Universal light-cured/C&B Bond (self-cured cement), II- Scotchbond Universal (SBU) light-cured/RelyX Ultimate (RXU) self-cured, III- SBU light-cured/RXU light-cured, IV - SBU no light-cured/RXU light-cured and V- SBU no light-cured/RXU self-cured. After 24 h, the teeth were sectioned into beans to produce a cross-sectional area of 0.8 mm². Specimens of each group were individually mounted on a jig and placed on a tensile testing universal machine. A tensile force was applied at a 0.5mm/min cross-speed. The bond strength was recorded and failure modes were classified using scanning electron microscopy. In order to observe dentin/adhesive-cement interface, selected beans from each group were stained with 0.1% Rodhamine B for 1 h and analyzed using Confocal Laser Scanning Microscopy. Statistical analysis was performed using ANOVA and Fisher¿s PLSD test (?=0.05). For bond strength (MPa) no statistical difference of was observed among the groups: I - 59.9 (9.3); II- 57.6 (15.9); III - 63.9 (12.7) and IV- 53.7 (13.9). Group V showed statistical lower average value 16.2 (6.4) compared with all others groups. Cohesive failure modes occurred predominately along of adhesive and resin cement to all groups. The ultrastructural observation suggested the dentin surface interaction between multi-mode adhesives and resin cement when the adhesive or resin cement was light-cured. The adhesive interaction occurred between multi-mode adhesive systems and resin cements whenever the adhesive and/or resin cement was light-activated
Doutorado
Materiais Dentarios
Doutora em Materiais Dentários
Soares, Giulliana Panfiglio 1981. "Evaluation of different adhesive systems on the bond strength of a silorane based resin after 24 hours or 6 months of storage = Avaliação de diferentes sistemas adesivos na resistência de união de um compósito a base de silorano, após 24 horas ou 6 meses de armazenamento." [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288867.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-22T02:49:00Z (GMT). No. of bitstreams: 1 Soares_GiullianaPanfiglio_D.pdf: 64597032 bytes, checksum: e11e3cff0a47e90986ae7f73605e5aa2 (MD5) Previous issue date: 2013
Resumo: A manutenção da integridade entre a interface dente e restauração é importante para o sucesso clínico de restaurações adesivas, influenciando significativamente na longevidade das mesmas. Assim, o objetivo deste trabalho in vitro, foi avaliar o efeito de diferentes sistemas adesivos na resistência de união à dentina e ao esmalte de uma resina composta a base de silorano, após 24 horas e 6 meses de armazenamento. Para este estudo, setenta terceiros molares humanos hígidos, recém-extraídos e não restaurados, foram usados em um dos dois testes de resistência de união. Para a resistência à microtração à dentina, vinte e oito terceiros molares humanos, sem raízes, tiveram a superfície oclusal planificada a fim de expor a dentina superficial. Os dentes foram aleatoriamente divididos em 8 grupos experimentais (n=7): Adper Single Bond 2 (3M ESPE); Adper Scotchbond Multiuso (3M ESPE); Adper SE Plus (3M ESPE) e sistema adesivo P90 (3M ESPE), sendo os palitos obtidos de cada grupo divididos entre os testes envelhecidos ou não. Após a aplicação do sistema adesivo relacionado com cada um dos grupos, foi aplicada uma camada do adesivo da resina à base de silorano e fotopolimerizado por 10 segundos. O passo seguinte foi à inserção da resina composta Filtek P90 (3M ESPE) e fotoativação por 40 segundos com aparelho LED de segunda geração, o mesmo utilizado para a fotoativação dos sistemas adesivos. Para a resistência de união ao microcisalhamento ao esmalte, oitenta e quatro fragmentos foram obtidos a partir de superfícies proximais de quarenta e dois terceiros molares humanos (n=7). Os grupos foram os mesmos que os utilizados no ensaio de microtração acrescido de quatro grupos experimentais com condicionamento ácido prévio com ácido fosfórico 35% (3M ESPE) para os grupos que utilizaram os adesivos auto condicionantes, resultando em 12 grupos experimentais. As amostras foram testadas em 24 horas ou após 6 meses de envelhecimento. Os dados foram analisados estatisticamente por meio xii da análise de variância (ANOVA) com medidas repetidas e Teste de Tukey (p = 0,05) Os resultados mostraram que, para o teste de resistência à microtração, não houve diferença estatística significativa entre os grupos, nem para a interação (p > 0,05). No teste de microcisalhamento, o grupo condicionado com ácido fosfórico 35% + Adper SE Plus apresentou a maior resistência de união, no entanto, nenhuma diferença estatística entre o grupo condicionado com ácido fosfórico 35% + Sistema adesivo Silorano (p = 0,051) foi observada. O sistema Adesivo Silorano apresentou a menor resistência de união, sem diferença estatística entre o Adper SE Plus (p = 0,972). Para ambos os testes não houve diferença entre 24 horas e 6 meses (p> 0,05) de armazenamento. Pode concluir-se que os sistemas adesivos apresentaram comportamentos semelhantes na resistência de união à dentina; para o esmalte, o condicionamento ácido prévio aumentou os valores de resistência de união dos adesivos auto-condicionantes, promovendo um padrão de condicionamento que favorece a adesão a este substrato. O armazenamento por 24 horas e 6 meses não foi significativo para a resistência de união ao esmalte ou dentina
Abstract: The maintenance of the bond integrity between tooth and dental restoration is important for the clinical success of adhesive restorations, influencing their durability. Thus, the aim of this in vitro study was to evaluate the effect of different adhesive systems on the microtensile bond strength to dentin and microshear bond strength to enamel of silorane based resin after 24 hours and 6 months of storage. For this study seventy freshly extracted non-carious, unrestored human third molars were assigned to one of two bond strength test. For the microtensile bond strength, twenty-eight third human molars, with no roots, had their oclusal surface flattened in order to expose superficial dentin. Teeth were randomly assigned to 8 experimental groups (n=7): Adper Single Bond 2 (3M ESPE); Adper Scotchbond Multi-Purpose (3M ESPE); Adper SE Plus (3M ESPE) and P90 adhesive system (3M ESPE), the sticks being obtained from each group divided between tests aged or not. After application of the adhesive system related to each group, was applying only the silorane adhesive bond and then light cured for 10 seconds. The next step was the insertion of silorane composite resin Filtek P90 (3M ESPE) and light cured for 40 seconds with second-generation light-emitting diode, the same used for the light cured of the adhesive systems. For the microshear bond strength, eighty four fragments were obtained from proximal surfaces of forty two third human molars. Groups were the same as those used in the microtensile test increasing two more experimental groups with etching previous with phosphoric acid 35% (3M ESPE) for the self etch adhesive systems, resulting in 12 experimental groups (n=7). The samples were tested after 24 hours or after 6 months of aging. The data were statistically analyzed by repeated measure analysis of Variance (ANOVA) and Tukey's test (p=0.05). Results showed that for the microtensile bond strength there was no statistical difference for all groups, neither for interaction (p>0.05). For microshear bond strength, Etching with xiv phosphoric acid 35% + Adper SE Plus presented the highest bond strength, however no statistical difference between Etching with phosphoric acid 35% + Silorane System Adhesive (p=0.051) was observed. Silorane System Adhesive presented the lowest bond strength, without statistical difference from Adper SE Plus (p=0.972). There was no statistical difference between 24 hours and 6 months (p > 0.05). It can be concluded that there was no difference for the dentin bond strength group; for microshear bond strength, acid etching increases the bond strength values of the self-etching adhesive to enamel, promoting a conditioning pattern that favors the adhesion to this substrate. There was no statistical difference between the periods of 24 hours and 6 months of storage for enamel or dentin
Doutorado
Dentística
Doutora em Clínica Odontológica
Barreto, Suelem Chasse 1987. "Efeito da quantidade de primer na adaptação marginal, nanoinfiltração e resistência à união de sistemas adesivos após envelhecimento termomecânico = Effects of primer amount on marginal adaptation, nano leakage and bond strength of adhesive systems after thermomechanical aging." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/289628.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-26T22:01:59Z (GMT). No. of bitstreams: 1 Barreto_SuelemChasse_M.pdf: 116094135 bytes, checksum: 14295d9814cd8a3d1872c717dd154522 (MD5) Previous issue date: 2015
Resumo: O estudo teve como objetivo avaliar a influência da quantidade de primer usada na hibridização do substrato na resistência de união por microtração, nanoinfiltração e adaptação marginal em restaurações com sistemas adesivos e resina composta após envelhecimento termomecânico. Foram selecionados 48 molares hígidos que foram restaurados em uma cavidade tipo classe I pela técnica incremental com sistema adesivo convencional de três passos (Adper Scotchbond Multiuso - 3M ESPE) e sistema autocondicionante de dois passos (Clearfill SE bond - Kuraray). Para o sistema adesivo convencional foi realizado o condicionamento ácido total e para o sistema adesivo autocondicionante, o condicionamento ácido foi seletivo no ângulo cavosuperficial em esmalte. Em seguida, os dentes foram alocados aleatoriamente em 6 grupos resultantes da interação da aplicação de uma quantidade padronizada de 1, 2 ou 3 gotas de primer e sistema adesivo. Todos os dentes foram restaurados com a resina composta microhíbrida Charisma (Heraeus Kulzer). Após o polimento das restaurações, estas foram moldadas com polivinilsiloxano e as réplicas foram obtidas em resina epóxica. Em seguida, os espécimes foram levados à máquina de ciclagem termomecânica ERIOS 37000 (ERIOS, São Paulo, Brasil), na qual realizou-se o envelhecimento artificial da restauração através de 200.000 ciclos com carga de 86 N a uma frequência de 2 Hz associados a ciclos térmicos com a temperatura variando entre 5ºC, 37ºC e 55ºC, a cada 30 segundos. Terminado o envelhecimento, obteve-se novas réplicas que foram levadas ao microscópio eletrônico de varredura (MEV) para análise de fendas em comparação com as imagens iniciais. Em seguida os dentes foram submetidos ao ensaio mecânico de resistência de união à microtração por meio de palitos obtidos da interface vestibular, e, posteriormente, avaliou-se o padrão de fratura usando MEV. Para análise de nanoinfiltração, oito palitos de cada grupo foram separados, aleatoriamente, para se avaliar a infiltração de íons de nitrato de prata em MEV. Após o teste termomecânico, os dados foram submetidos à Análise de Variância dois fatores e teste de Tukey com ?= 0,05. Quando o excesso de primer na camada adesiva foi avaliado, o sistema adesivo convencional de três passos apresentou melhores resultados de resistência à união quando comparado ao sistema adesivo autocondicionante de dois passos (?= 0,0015). A quantidade de gotas influenciou a resistência de união à microtração (?= 0,0057). A nanoinfiltração foi maior quando se utilizou maior quantidade de primer e o envelhecimento termomecânico aumentou a formação de fendas marginais. O uso de primer em excesso não é recomendado pois reduz a resistência de união à microtração e forma uma camada híbrida de baixa qualidade
Abstract: This study aimed to evaluate the effects of the amount of primer used in the tooth substrate hybridization on the microtensile bond strength (?TBs), nanoleakage and marginal sealing in dental restorations with adhesive systems and composite resin after thermomechanical aging. A total of 48 human molars were restored class I cavities with incremental technique with a three-step etchand- rinse adhesive system (Adper Scotchbond Multipurpose, 3M ESPE) and twostep self-etching adhesive system (Clearfill SE Bond, Kuraray), For three-step etch-and-rinse adhesive system used total acid etching and for the two-step selfetching system adhesive only enamel cavosurface was acid etching. Then, the teeth were aleatory alocated in 6 groups resulted the interaction between the factors application of standard quantity of primer (1, 2 or 3 drops) and adhesive systems. Afterward a standardized amount of each primer was applied (1, 2, or 3 drops of primer). All teeth were restored with microhybrid composite resin (Charisma, Heraeus Kulzer). After polishing of restorations, they were molded with polyvinylsiloxane and replicas were obtained with epoxy resin. Then the specimens were taken to thermomechanical cycling machine (model 37000 ERIOS), which carried out the artificial aging of restoration through 200,000 cycles with 86 N load at a frequency of 2 Hz associated with thermal cycling and temperature ranging from 5, 37and 55°C every 30 seconds. After aging, new replicas were obtained and images were taken by scanning electron microscope (SEM) to analyze gaps. These images were compared to the initial ones. Then the teeth were subjected to ?TBs testing through beams obtained from buccal interface, and fracture pattern was evaluated using SEM. For nanoleakage analysis, eight beams of each group were randomly separated to assess infiltration with silver nitrate ions and subsequently evaluated by SEM. After the mechanical test, the data were subjected to statistical analysis using two-way Analysis of Variance and Tukey's test (? = 0.05). When primer excess was evaluated at the adhesive layer, the three-step etch-and-rinse adhesive system showed higher bond strength results x when compared to two-step self-etching adhesive system (? = 0.0015). The primer excess influenced ?TBS (? = 0.0057). Nanoleakage was higher when using larger amount of primer was used. Thermomechanical aging increased the formation of marginal gaps. The use of primer in excess is not recommended, because the excess reduces the ?TBs and creates an unsatisfactory hybrid layer on tooth substrate
Mestrado
Dentística
Mestra em Clínica Odontológica
Stape, Thiago Henrique Scarabello 1984. "Influência do pré-tratamento dentinário com dimetilsulfóxido na resistência de união, exposição de matriz colágena e grau de conversão de sistemas adesivos = Influence of dimethyl sulfoxide-wet bonding technique on dentin bond strength, collagen exposure and monomer conversion of adhesive systems." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/289695.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-27T11:02:43Z (GMT). No. of bitstreams: 1 Stape_ThiagoHenriqueScarabello_D.pdf: 2806642 bytes, checksum: ff8fdbed5d394599068a4bc1d64d36c2 (MD5) Previous issue date: 2015
Resumo: Essa tese avaliou um novo protocolo adesivo, que consiste no pré-tratamento dentinário com dimetilsulfóxido (DMSO) 50%, com o intuito de otimizar a durabilidade de interfaces adesivas produzidas pelos mecanismos de união convencional e autocondicionante envolvendo o substrato dentinário. Para isso, foram realizados dois estudos independentes para avaliar: (i) o efeito do uso do dimetilsufóxido (DMSO) na resistência de união imediata e na exposição de matriz colágena decorrente da hibridização dentinária na interface adesiva; e (ii) para avaliar o efeito do protocolo proposto na conversão monomérica na camada híbrida e na resistência de união após envelhecimento. Terceiros molares hígidos foram coletados e limpos, a face oclusal foi seccionada, expondo uma superfície dentinária de profundidade média, que foi saturada com uma solução aquosa de DMSO 50% (pH 8.2) após o condicionamento ácido para o sistema convencional de três passos (Adper Scothbond Multi-Purpose: 3M ESPE: SBMP) e previamente a aplicação do sistema autocondicionante de dois passos (Clearfil SE Bond: Kuraray; CF) no substrato mineralizado. Nos grupos controles, as amostras não foram tratadas com DMSO. Os segmentos restaurados com resina composta foram seccionados e submetidos ao ensaio de microtração após 24 h à 0,5 mm/min até a fratura (n=12) e no segundo estudo (n=10), após 1 ano e 2 anos. Foi realizada Two-way ANOVA para análise dos dados imediatos e no segundo estudo foi utilizada ANOVA medidas repetidas (proc mixed), ambos seguidos pelo Teste de Tukey (?=0.05). Foi realizado a análise histomorfométrica (n=12) para avaliação da extensão de matriz colágena exposta na interface adesiva por meio de microscopia ótica e coloração de Tricrômica de Masson após 24 h. Esses dados foram submetidos a Two-way ANOVA, seguido do Teste de Tukey (?=0.05). O grau de conversão monomérica (DC) na camada híbrida foi avaliado por espectroscopia micro-raman após 24 h (n=10), sendo submetidos a One-way ANOVA e Teste de Tukey (?=0.05). A interação entre protocolo adesivo e sistema adesivo influenciou significativamente a extensão de matriz colágena exposta (p<0,0001) e resistência de união imediata (p=0,0091). O protocolo adesivo com DMSO reduziu significativamente o grau de exposição de matriz colágena exposta (SBMP: 85,3% e CF: 61,5%), melhorando a qualidade da hibridização dentinária para ambos sistemas adesivos. Não houve influência negativa do DMSO na conversão monomérica do SBMP (p=0.892); já para o CF, houve aumento na conversão monomérica (p=0.033). O pré-tratamento com DMSO aumentou a resistência de união imediata do SBMP (p<0.0001). Considerando as amostras não tratadas, houve uma redução significativa (SBMP: 45,6% e CF: 36,8%) na resistência de união do SBMP (p<0.0001) e CF (p<0.0001) após dois anos de envelhecimento. Independentemente do tipo de adesivo, não houve diferença estatística na resistência de união entre valores imediatos e após 2 dois anos quando o DMSO foi empregado (p>0,05). A análise dos padrões de falha evidenciou uma tendência na redução no número de falhas adesivas após dois anos para as amostras tratadas com DMSO. Portanto, o protocolo adesivo proposto utilizando o DMSO é uma abordagem promissora para reduzir degradação da interface adesiva para os adesivos convencional e autocondicionante testados
Abstract: This work highlights a new bonding concept using 50% dimethyl sulfoxide (DMSO) as a dentin pre-treatment to optimize resin-dentin bonding for both etch-and rinse and self-etch adhesive systems after long-term aging. Two independent studies were performed: (i) to evaluate the effect of dimethyl sulfoxide wet-bonding technique on resin infiltration depths at the bonded interface and dentin bond strength; and (ii) to examine the effect of dentin pre-treatment with DMSO on the degree of conversion and dentin bond strength after long-term aging. Flat dentin surfaces derived from extracted sound human third molars were saturated with 50% DMSO (pH 8.2) after acid etching for a water-based etch-and-rinse adhesive system (Adper Scothbond Multi-Purpose: 3M ESPE; SBMP), and before acid primer application for a 10-MDP self-etch adhesive (Clearfil SE Bond: Kuraray; CF). In control groups, specimens were not treated with DMSO. The restored tooth segments were sectioned and submitted to microtensile bond strength test at 24 h (n=12), 1 year (n=10) and 2 years (n=10) at 0.5 mm/min until specimen fracture. One slab per tooth (n=12) was stained by Masson Trichrome and the extent of exposed collagen matrix at the bonded interface was evaluated using optical microscopy and a histomorphometric software at 24 h. Statistical analysis of the extension of collagen exposure was performed by two-way ANOVA followed by Tukey Test (?=0.05). The degree of conversion (DC) was measured inside the hybrid layer by micro-raman spectroscopy (n=10) at 24 h. DC statistical analysis was performed by One-way ANOVA and Tukey Test (?=0.05). Immediate microtesnile data was statistically analyzed Two-way ANOVA and aged data was analyzed by repeated measurres ANOVA (proc mixed). Post hoc multiple comparisons were performed by Tukey Test (?=0.05). The interaction between "dentin pre-treatment" and "adhesive system" significantly influence the extent of exposed collagen matrix (p<0.0001) and dentin bond strength (p=0.0091). The adhesive protocol with DMSO significantly reduced the extent of exposed collagen matrix (SBMP: 85.3% and CF: 61.5%), improving the quality of dentin hybridization for both adhesive systems. There was no negative influence of DMSO in monomer conversion for SBMP (p=0.892); nevertheless, there was an increase in monomer conversion (p=0.033) for CF. Dentin pretreatment with DMSO increased the immediate bond strength of SBMP (p<0.0001). Considering the untreated samples, there was a significant reduction (SBMP: 45.6% and CF: 36.8%) on the bond strength of SBMP (p<0.0001) and CF (p<0.0001) after two years of aging. Regardless of adhesive type, no significant reduction in bond strength at two years for DMSO-treated samples was observed. Fracture pattern analysis showed a tendency toward reduction in the number of adhesive failures when the DMSO-wet bonding was performed. Therefore, DMSO-wet bonding is a promising approach to reduce resin-dentin bond degradation of etch-and-rinse and self-etch adhesives
Doutorado
Dentística
Doutor em Clínica Odontológica
Ribeiro, Josà Carlos Viana. "Influence of temporary cements on the bond strength of indirect restorations to dentin employing two resinous adhesive systems." Universidade Federal do CearÃ, 2007. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=684.
Повний текст джерелаThe aim of this in vitro study was to evaluate the influence of residual temporary cements on the microtensile bond strength of indirect composite resin build-ups employing two types of adhesive systems. Thirty non-carious human third molars were selected and the occlusal enamel was removed to produce flat dentin surfaces. The surfaces were coated with provisional restorations fixed with either eugenol-containing temporary cement (Temp Bond), or non-eugenol temporary cement (Freegenol). After one week, the provisional restorations and residual cement were removed with a dental probe and one specimen of each group was selected for evaluation by atomic force microscopy to investigate the presence of remnants of temporary cements. For the control groups, no provisional restorations were made. The dentin surfaces were cleaned with pumice and treated either with a total-etch (TE) adhesive system (Adper Single Bond 2) or with a self-etch (SE) adhesive system (Adper Prompt). Composite resin build-ups (Filtek Z250) were fixed to the bonded dentin surfaces using resin luting cement (RelyX ARC). The bonded specimens were then cross-sectioned producing sticks of 0.9 mm2 of adhesive area. Microtensile bond strength testing was perfomed in a universal test machine at a rate of 0.5 mm/min until fracture occurred. Optical microscopic images and scanning electron micrographs of fractured surfaces were obtained and recorded for fractographic analysis. Bond strength values were submitted to analysis of variance (ANOVA) and t-Student tests to detect significant differences between groups. The results showed a significant reduction on microtensile bond strength values when Temp Bond cement was employed in comparison with the control groups either for TE (p = 0.0331) or SE (p = 0.0267) adhesive systems. Total-etch groups showed significantly higher bond strength values than self-etch groups (p < 0.0001). Optical and scanning electron microscopic analysis revealed a majority of mixed fractures (67%). Adhesive failure at dentin-adhesive interface was significantly higher for SE groups than for TE groups (p = 0.0001). Atomic force microscopic images showed that residues of both temporary cements remained on dentin surfaces even after mechanical cleansing and treatment with acids. Bond strengths of total-etch and self-etch adhesive systems were significantly lowered only when eugenol-containing temporary cement was used prior to bonding and cementation procedures.
O presente estudo experimental in vitro se propÃÂs a investigar a influÃÂncia de resÃÂduos de cimentos provisÃÂrios sobre a resistÃÂncia de uniÃÂo de restauraÃÂÃÂes indiretas de resina composta ÃÂ dentina, empregando-se dois sistemas adesivos resinosos, por meio de ensaio mecÃÂnico de microtraÃÂÃÂo. SuperfÃÂcies planas de dentina foram obtidas a partir da remoÃÂÃÂo do esmalte oclusal de 30 (trinta) dentes terceiros molares humanos sem lesÃÂes de cÃÂrie, extraÃÂdos por indicaÃÂÃÂo cirÃÂrgica ou ortodÃÂntica. Os espÃÂcimes foram distribuÃÂdos em 6 (seis) grupos, de acordo com o tipo de cimento provisÃÂrio e o tipo de sistema adesivo empregado. Discos de resina acrÃÂlica foram fixados ÃÂ superfÃÂcie dentinÃÂria dos espÃÂcimes empregando-se o cimento provisÃÂrio com eugenol Temp Bond ou o cimento sem eugenol Freegenol. ApÃÂs 7 (sete) dias em ÃÂgua destilada a 37ÃÂC, as restauraÃÂÃÂes provisÃÂrias e os resÃÂduos de cimento foram removidos com instrumento manual. Nos grupos-controle, nÃÂo foram empregadas restauraÃÂÃÂes provisÃÂrias. As superfÃÂcies dentinÃÂrias foram limpas com pasta de pedra-pomes e ÃÂgua e tratadas de acordo com o sistema adesivo empregado: condicionamento com ÃÂcido fosfÃÂrico a 37% e aplicaÃÂÃÂo do sistema adesivo Adper Single Bond 2 (SB2) ou aplicaÃÂÃÂo do sistema adesivo autocondicionante Adper Prompt (AP). Em seguida, blocos de resina composta (Filtek Z 250) foram fixados ao substrato dentinÃÂrio utilizando-se um cimento resinoso (RelyX ARC). AtravÃÂs de cortes seriados, foram obtidos corpos-de-prova em forma de palitos com ÃÂrea de interface adesiva de aproximadamente 0,9 mm2 que foram submetidos ao ensaio de microtraÃÂÃÂo em mÃÂquina universal de testes com velocidade de 0,5mm/min atÃÂ a ruptura. A resistÃÂncia adesiva foi expressa pela tensÃÂo de ruptura dos corpos-de-prova. Os modos de fratura das interfaces adesivas foram analisados por microscopia ÃÂptica digital e microscopia eletrÃÂnica de varredura. A presenÃÂa de resÃÂduos dos cimentos provisÃÂrios foi investigada por microscopia de forÃÂa atÃÂmica. Os resultados de resistÃÂncia adesiva foram submetidos ÃÂ anÃÂlise de variÃÂncia (ANOVA) de dois critÃÂrios e teste t-Student para detectar diferenÃÂas significativas entre os grupos. Observou-se uma reduÃÂÃÂo estatisticamente significativa da resistÃÂncia adesiva quando o cimento Temp Bond foi empregado em relaÃÂÃÂo aos grupos-controle, tanto com o sistema adesivo SB2 (p = 0,0331) quanto com o sistema AP (p = 0,0267). Os grupos em que o sistema SB2 foi utilizado apresentaram valores de resistÃÂncia adesiva estatisticamente superiores aos grupos com o sistema AP (p< 0,0001), independentemente do emprego ou nÃÂo de cimentos provisÃÂrios. A anÃÂlise dos modos de fratura mostrou uma maior ocorrÃÂncia de fraturas mistas (67%), sendo que nos grupos com o sistema de condicionamento ÃÂcido total a ocorrÃÂncia de fraturas adesivas na interface dentina-adesivo foi estatisticamente menor que nos grupos com o sistema autocondicionante (p = 0,0001). Com base nesses resultados, concluiu-se que resÃÂduos microscÃÂpicos dos dois cimentos provisÃÂrios permaneceram sobre a superfÃÂcie dentinÃÂria mesmo apÃÂs limpeza mecÃÂnica e tratamento com ÃÂcidos. PorÃÂm, apenas o cimento provisÃÂrio contendo eugenol reduziu significativamente a resistÃÂncia de uniÃÂo ÃÂ dentina das restauraÃÂÃÂes indiretas de resina, independentemente do sistema adesivo empregado.
Liang, Hai-chiung, and 梁海瓊. "Micro-push-out bond strength and the modes of failure for a fibre-reinforced resin-post system cemented using three adhesive lutingcements after cyclic loading." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2010. http://hub.hku.hk/bib/B45591106.
Повний текст джерелаMahindre, Prajakta Prakash. "Micro-push-out bond strength and the modes of failure for a fiber-reinforced resin-post system cemented using four adhesive luting cements." Click to view the E-thesis via HKUTO, 2009. http://sunzi.lib.hku.hk/hkuto/record/B43224052.
Повний текст джерелаMahindre, Prajakta Prakash. "Micro-push-out bond strength and the modes of failure for a fiber-reinforced resin-post system cemented using four adhesive lutingcements." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B43224052.
Повний текст джерелаКниги з теми "Dentin bonding adhesive system"
Evans, K. B. Evaluation of a metering, mixing, and dispensing system for mixing polysulfide adhesive: Final report. Brigham City, Utah: Morton Thiokol, Inc., Aerospace Group, 1989.
Знайти повний текст джерелаDavies, George E. A Clinical investigation comparing a composite (Concise, 3M) to two mix one step adhesives (Right On, TP Lab. ; System 1+, Ormco) in direct bonding of bracket attachments. 1986.
Знайти повний текст джерелаЧастини книг з теми "Dentin bonding adhesive system"
von Byern, Janek, Claudia E. Mills, and Patrick Flammang. "Bonding Tactics in Ctenophores — Morphology and Function of the Colloblast System." In Biological Adhesive Systems, 29–40. Vienna: Springer Vienna, 2010. http://dx.doi.org/10.1007/978-3-7091-0286-2_3.
Повний текст джерелаMohammadiFirouz, Reza, Eduardo Pereira, and Joaquim Barros. "Thermo-mechanical Bonding Behaviour of CFRP NSM System Using Cement-Based Adhesive." In Lecture Notes in Civil Engineering, 287–99. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-88166-5_24.
Повний текст джерелаSoejima, Hideki, Noritsugu Nakamura, Toshimichi Ogisu, Hiroshi Wakai, Yoji Okabe, Nobuo Takeda, and Yoshihiro Koshioka. "Development of a Structural Health Monitoring System to Evaluate De-Bonding in Composite Adhesive Structures." In ICAF 2009, Bridging the Gap between Theory and Operational Practice, 1187–97. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-2746-7_66.
Повний текст джерелаMitchell, David A., Laura Mitchell, and Lorna McCaul. "Dental materials." In Oxford Handbook of Clinical Dentistry, 626–65. Oxford University Press, 2014. http://dx.doi.org/10.1093/med/9780199679850.003.0015.
Повний текст джерелаStevens, DDS, Christopher J. "T-Scan Case Finishing Applications in Aesthetic Dentistry Assisted by the iTero Digital Impression System." In Handbook of Research on Computerized Occlusal Analysis Technology Applications in Dental Medicine, 705–43. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-6587-3.ch016.
Повний текст джерела"Dental materials." In Oxford Handbook of Clinical Dentistry, edited by Bethany Rushworth and Anastasios Kanatas, 647–85. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198832171.003.0016.
Повний текст джерелаBanerjee, Avijit, and Timothy F. Watson. "Restorative materials and their relationship to tooth structure." In Pickard's Guide to Minimally Invasive Operative Dentistry. Oxford University Press, 2015. http://dx.doi.org/10.1093/oso/9780198712091.003.0010.
Повний текст джерелаPerdigão, Jorge, and Ana Sezinando. "Enamel and dentin bonding for adhesive restorations." In Non-Metallic Biomaterials for Tooth Repair and Replacement, 45–89. Elsevier, 2013. http://dx.doi.org/10.1533/9780857096432.1.45.
Повний текст джерелаAbedin, Farhana, Brock Roughton, Paulette Spencer, Qiang Ye, and Kyle Camarda. "Computational Molecular Design of Water Compatible Dentin Adhesive System." In 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering, 2081–86. Elsevier, 2015. http://dx.doi.org/10.1016/b978-0-444-63576-1.50041-8.
Повний текст джерелаWoo, Chulsoo, Bin Liang, and Jonghyuk Oh. "Global Trend of Glass Bonding for Appliance Industry Assemblies." In Advanced Functional Materials. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.90515.
Повний текст джерелаТези доповідей конференцій з теми "Dentin bonding adhesive system"
Kunin, A. A., I. E. Yesaulenko, M. Zoibelmann, S. N. Pankova, Yu A. Ippolitov, O. I. Oleinik, T. A. Popova, I. V. Koretskaya, B. R. Shumilovitch, and E. E. Podolskaya. "Low intensity lasers, modern tilling materials and bonding systems influence on mineral metabolism of hard dental tissues." In European Conference on Biomedical Optics. Washington, D.C.: Optica Publishing Group, 2001. http://dx.doi.org/10.1364/ecbo.2001.4433_25.
Повний текст джерелаKoytchev, E., M. Datcheva, and R. Iankov. "Micromechanical testing of the dentin hybrid zone formed by all-in-one adhesive system in sound human dentin." In RECENT DEVELOPMENTS IN NONLINEAR ACOUSTICS: 20th International Symposium on Nonlinear Acoustics including the 2nd International Sonic Boom Forum. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4934291.
Повний текст джерелаZoschke, Kai, Matthias Wegner, Thorsten Fischer, and Klaus-Dieter Lang. "Temporary handling technology by polyimide based adhesive bonding and laser assisted de-bonding." In 2016 6th Electronic System-Integration Technology Conference (ESTC). IEEE, 2016. http://dx.doi.org/10.1109/estc.2016.7764491.
Повний текст джерелаChang, R. J., and C. C. Chen. "Using Microgripper for Adhesive Bonding in Automatic Microassembly System." In 2007 International Conference on Mechatronics and Automation. IEEE, 2007. http://dx.doi.org/10.1109/icma.2007.4303583.
Повний текст джерелаPaproth, A., B. Adolphi, and K. J. Wolter. "Investigation of adhesive bonding on non-noble metal in Electronic Packaging." In 2010 3rd Electronic System-Integration Technology Conference (ESTC). IEEE, 2010. http://dx.doi.org/10.1109/estc.2010.5642832.
Повний текст джерелаNghiem, Giang M., Huyen T. Nguyen, Knut Aasmundtveit, and Helge Kristiansen. "Simulation of adhesive flow during ACF bonding process for display interconnect." In 2016 6th Electronic System-Integration Technology Conference (ESTC). IEEE, 2016. http://dx.doi.org/10.1109/estc.2016.7764488.
Повний текст джерелаBL, Donegá, Zaniboni JF, Basile GF, and Kuga MC. "The influence of the application mode of the adhesive on the adhesive interface of cementing fiber pins." In II INTERNATIONAL SEVEN MULTIDISCIPLINARY CONGRESS. Seven Congress, 2023. http://dx.doi.org/10.56238/homeinternationalanais-105.
Повний текст джерелаZhu, Yunhui, Shenglin Ma, Xin Sun, Qinghu Cui, Xiao Zhong, Yuan Bian, Jing Chen, Min Miao, and Yufeng Jin. "A TSV last integration approach with wafer level pre-patterned adhesive bonding." In 2012 4th Electronic System-Integration Technology Conference (ESTC). IEEE, 2012. http://dx.doi.org/10.1109/estc.2012.6542115.
Повний текст джерелаde Mello, Andrea M. D., Fabiano A. S. Mello, Edmir Matson, Adriana B. Mattos, and Guilerme S. Mello. "Evaluation of the tensile bond strength of an adhesive system self-etching in dentin irradiated with Er:YAG laser." In BiOS 2001 The International Symposium on Biomedical Optics, edited by Peter Rechmann, Daniel Fried, and Thomas Hennig. SPIE, 2001. http://dx.doi.org/10.1117/12.424507.
Повний текст джерела"Hilti Plate Bonding Technique: an Integral System for Structural Repair and Strengthening." In SP-165: Repair and Strengthening of Concrete Members with Adhesive Bonded Plates. American Concrete Institute, 1996. http://dx.doi.org/10.14359/1463.
Повний текст джерела