Статті в журналах: "DEMANDING TECHNOLOGY"

1

Koppel, Ross. "Demanding Utility From Health Information Technology." Annals of Internal Medicine 158, no. 11 (June 4, 2013): 845. http://dx.doi.org/10.7326/0003-4819-158-11-201306040-00012.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Coe, Scott, Andrew Ott, and Donna Pratt. "Demanding Standards." IEEE Power and Energy Magazine 8, no. 3 (May 2010): 55–59. http://dx.doi.org/10.1109/mpe.2010.936350.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Jóźwiak, Lech. "Embedded Computing Technology for Highly-demanding Cyber-physical Systems." IFAC-PapersOnLine 48, no. 4 (2015): 19–30. http://dx.doi.org/10.1016/j.ifacol.2015.07.002.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Zhou, Changyu, and Jinxuan Cao. "Green Processing Technology of Meat and Meat Products." Foods 12, no. 12 (June 13, 2023): 2356. http://dx.doi.org/10.3390/foods12122356.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Bowman, Nicholas David. "Editorial: Video Games as Demanding Technologies." Media and Communication 7, no. 4 (December 20, 2019): 144–48. http://dx.doi.org/10.17645/mac.v7i4.2684.

Повний текст джерела

Анотація:

From the middle-20th century to today, video games have grown from an idiosyncratic interest of computer programmers and engineers to a globally dominant form of media entertainment. Advances in technology and creativity have combined to present players with interactive experience that vary in their cognitive, emotional, physical, and social complexity. That video games constitute co-authored experiences—dialogues between the player and the system—is at least one explanation for their appeal, but this co-authorship brings with it an enhanced set of requirements for the player’s attention. For this thematic issue, researchers were invited to debate and examine the cognitive, emotional, physical, and social demands of video games; their work (as well as the impetus for this work) is summarized below.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Andrich, Renzo, and Serenella Besio. "Being informed, demanding and responsible consumers of assistive technology: an educational issue." Disability and Rehabilitation 24, no. 1-3 (January 2002): 152–59. http://dx.doi.org/10.1080/09638280110064778.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Paravidino, Monica, Jarle Holt, Diego Romano, Neetu Singh, Isabel W. C. E. Arends, Adriaan J. Minnaard, Romano V. A. Orru, Francesco Molinari, and Ulf Hanefeld. "Microbial-catalysed resolution of sterically demanding cyanohydrins." Journal of Molecular Catalysis B: Enzymatic 63, no. 1-2 (April 2010): 87–92. http://dx.doi.org/10.1016/j.molcatb.2009.12.014.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Schmitz, Maria-Luisa, Chiara Antonietti, Tessa Consoli, Alberto Cattaneo, Philipp Gonon, and Dominik Petko. "Transformational leadership for technology integration in schools: Empowering teachers to use technology in a more demanding way." Computers & Education 204 (October 2023): 104880. http://dx.doi.org/10.1016/j.compedu.2023.104880.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Brewer, Roger. "High Reliability Electronics for Demanding Aircraft Applications – An Overview." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2016, HiTEC (January 1, 2016): 000011–17. http://dx.doi.org/10.4071/2016-hitec-11.

Повний текст джерела

Анотація:

Abstract The primary form of generated power on any typical aircraft (Tactical, Airlift, Commercial) requires conversion in multiple different forms (voltage levels, aircraft compliant frequency) and at various power levels to meet the total needs of the vehicle. DC:AC Power Conversion (Inverters), AC-DC Generator (conditioning) electronics, AC-AC frequency conditioning and DC:DC Power Conversion are all forms of conversion within the power system (primary, secondary tiers) typical of any aircraft. Additionally, within the power distribution network often solid state power switches in later generation aircraft and fighters are used to control and manage power (control power ramp-up for example) to loads and isolate electrical faults. The conditioning, conversion and control of this power with high reliability devices can often occur in more extreme environments (high temperatures, high vibration and confined spaces) and can present challenging issues for aerospace and specifically aircraft. Weight objectives can further add to the challenges. This paper will discuss, at largely a level based on acquired and compiled lessons learned, some of the aforementioned challenges including the susceptibility to both electrically and mechanically induced failure modes in power devices encountered in aircraft. The paper will also discuss the notion that while Wide Band Gap (WBG) technology may be the right answer in some/many applications, it may not be the answer in achieving high reliability given a specific combination of application and operating conditions. Reliability issues can be focused around: a) packaging optimization, b) manufacturing tolerances and c) selecting the right vendor to do the job. Further, the ability to receive adequate forms of cooling from the aircraft (if not otherwise constrained and if cooling margins permit) to power electronics will also be discussed as an obvious and significant driver in maintaining high reliability and integrity in more demanding (and higher power) applications. Trade assessments that can occur with specific generator electronics will be discussed at a non-specific, and generalized, level. The main body of the paper will be concluded with a discussion on the potential application of WBG technology in a variety of applications mentioned for aircraft while pointing out unique aspects that may be relevant in the future adoption of this technology. Finally, a conclusion will be provided reiterating various points throughout the paper and areas of potential follow-on activity.

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Foley, Gregory D., Heba Bakr Khoshaim, Maha Alsaeed, and S. Nihan Er. "Professional development in statistics, technology, and cognitively demanding tasks: classroom implementation and obstacles." International Journal of Mathematical Education in Science and Technology 43, no. 2 (March 15, 2012): 177–96. http://dx.doi.org/10.1080/0020739x.2011.592616.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Maciejewska, K., A. Bednarkiewicz, and L. Marciniak. "NIR luminescence lifetime nanothermometry based on phonon assisted Yb3+–Nd3+ energy transfer." Nanoscale Advances 3, no. 17 (2021): 4918–25. http://dx.doi.org/10.1039/d1na00285f.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Jeong, Kyung-So, Su-Hyun Lee, and Eon-Hwa Lee. "Lingual Orthodontic Camouflage Treatment of Skeletal Class II Adult Demanding Orthognathic Surgery." Clinical Journal of Korean Association of Orthodontists 11, no. 4 (December 31, 2021): 290–301. http://dx.doi.org/10.33777/cjkao.2021.11.4.290.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Qian, Da Xing, and Hou Tian Zhang. "Prestressed Anchor Cable and Concrete Bored Pile Combined Support Technology." Applied Mechanics and Materials 204-208 (October 2012): 97–100. http://dx.doi.org/10.4028/www.scientific.net/amm.204-208.97.

Повний текст джерела

Анотація:

This article through the analysis of prestressed anchor cable and concrete pouring pile in support of their respective characteristics of the force, in a number of supporting more challenging and demanding conditions, the prestressed anchor and bored concrete pile combined support method, play to their respective support advantage to gain better engineering effect. This paper describes the support principle and key procedure.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Kumar Srivastava, Ashish. "A Survey of High Demanding Recent and Future Technologies in Terms of Wireless Communication." Journal of Futuristic Sciences and Applications 4, no. 1 (2021): 68–75. http://dx.doi.org/10.51976/jfsa.412110.

Повний текст джерела

Анотація:

A way of sharing knowledge via open space or Wi-Fi medium, wireless technology has a significant impact on the process in development. This essay introduces wireless technology while also attempting to concentrate on a few of the latest findings hotspots. After comparing the wireless and wired, this has been discovered that a wired connection seems to be more dependable than a wirelessly one. A wireless connection, meanwhile, is accessible and simple to set up. Furthermore, a thorough discussion of wireless communication development was included. According to research, it has been shown that by increasing the generation, the speed of the technology is also upgraded which is quite good. It has been noticed that gadget power utilization rises according to data growth. In addition, the writers examined a number of technological advances that are beneficial for wireless technology.

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Kil, Sang Cheol, and Hwan Tae Kim. "Welding Technology of Lightweight Alloys." Materials Science Forum 580-582 (June 2008): 75–80. http://dx.doi.org/10.4028/www.scientific.net/msf.580-582.75.

Повний текст джерела

Анотація:

The trend of the welding technology of lightweight alloys such as aluminum alloy and magnesium alloy has been studied. The lightweight alloys in the automobile, high-speed light aircraft and modern aerospace industry can reduce vehicle weight, while stringently demanding the high quality and efficienct welding techniques, to produce the best weldments. Among the production technologies, welding plays an important role in the fabrication of lightweight vehicle structure. This has led to an increasing attention towards the use of modern welding technology such as laser beam welding process, ultrasonic welding process, friction stir welding technology and laser hybrid welding technology, etc. This paper covers the recent technical trends of welding technologies of lightweight alloys including the COMPENDEX DB analysis of welding metallurgy, welding process, and welding fabrications.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Garrou, Philip. "3D IC Technology: the Perfect Storm." International Symposium on Microelectronics 2010, no. 1 (January 1, 2010): 000001–6. http://dx.doi.org/10.4071/isom-2010-ta1-paper1.

Повний текст джерела

Анотація:

IC technology, which has traditionally been dominated by dimensional scaling, is facing several technical and economic hurdles as it moves forward. Low K insulation has not been able to meet performance projections, copper traces are becoming more and more resistive, clock rates have been constrained due to thermal issues and multicore processors are demanding major increases in bandwidth and decreases in latency. Economic constraints will also begin limiting the number of IC companies able to develop leading-edge IC designs. Moving past 45 nm digital CMOS scaling will no longer guarantee lower cost and higher performance. All of these issues have crated a “perfect storm scenario” for the widespread adoption of 3D IC technology.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Vink, P., F. van Eijnatten, J. Goossenaerts, G. Grote, J. Stahre, and R. van der Berg. "Making Technology Work in Intelligent Manufacturing by Participative Simulation." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 44, no. 12 (July 2000): 2–571. http://dx.doi.org/10.1177/154193120004401234.

Повний текст джерела

Анотація:

Nowadays it is essential to anticipate on fast changes in production due to turbulent and demanding markets. The manufacturing workforce, e.g. specialized staff, management and production personnel, plays a crucial role in this process. Therefore, the EU-project ‘PSIM’ is started. PSIM is Participative Simulation environment for Integral (i.e., involving logistics, technology and human factors) Manufacturing enterprise renewal. Its long-term goal is to enable participative improvement in assembly operations, supported by advanced simulation software. This paper is an abstract of the project description.

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Chu, Yong Li, and Yong Li Chen. "Research of Zero-Cross Modulation Technology." Applied Mechanics and Materials 40-41 (November 2010): 473–77. http://dx.doi.org/10.4028/www.scientific.net/amm.40-41.473.

Повний текст джерела

Анотація:

The zero-cross modulation technology is a communication technology for distribution network, different from the traditional distribution network power line carrier communication technology. Its basic principle is to use the TWACS of the power frequency voltage fundamental wave to realize the signal transmission, and the modulation signal frequency is low It can be long-distance communication across the transformer. The data reliability and data through rate are high. It has broad application prospects in real-time communication less demanding situations. This paper first introduces the principle of the zero-cross modulation technology, and then details the generation and the identification of the voltage modulation signal. Practice shows that the transmission success rate of zero-cross modulation signal is up to100%. Meet the actual needs.

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Zhou, Jian, Li Jun Li, Yong Lin Yan, Wen Xiu Zhou, and Ke Cheng. "Research of Manufacturing Battery-Grade Co₃O₄ of Octahedron-Shape." Advanced Materials Research 239-242 (May 2011): 3082–85. http://dx.doi.org/10.4028/www.scientific.net/amr.239-242.3082.

Повний текст джерела

Анотація:

For getting higher quality and octahedron shape product Co3O4, the article studies precursor baked temperature, baked temperature route, baked condition affecting on apparent density, then points out obtaining octahedron shape Co3O4 technology. Test shows if the practice is accorded to the technology strictly, demanding standard Co3O4 can be obtained.

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Fassi, Irene, and Francesco Modica. "Editorial for the Special Issue on Micro-Electro Discharge Machining: Principles, Recent Advancements and Applications, Volume II." Micromachines 14, no. 1 (December 23, 2022): 29. http://dx.doi.org/10.3390/mi14010029.

Повний текст джерела

Анотація:

The second volume of the Special Issue on “Micro-Electro Discharge Machining: Principles, Recent Advancements and Applications” confirms the growing interest in the micro-EDM technology as a suitable and efficient technology for machining novel, multi-material components, with demanding requirements in terms of precision, accuracy and productivity [...]

Стилі APA, Harvard, Vancouver, ISO та ін.

21

BAHL, INDER J. "MONOLITHIC MICROWAVE INTEGRATED CIRCUITS BASED ON GaAs MESFET TECHNOLOGY." International Journal of High Speed Electronics and Systems 06, no. 01 (March 1995): 91–124. http://dx.doi.org/10.1142/s0129156495000031.

Повний текст джерела

Анотація:

Advanced military microwave systems are demanding increased integration, reliability, radiation hardness, compact size and lower cost when produced in large volume, whereas the microwave commercial market, including wireless communications, mandates low cost circuits. Monolithic Microwave Integrated Circuit (MMIC) technology provides an economically viable approach to meeting these needs. In this paper the design considerations for several types of MMICs and their performance status are presented. Multi-function integrated circuits that advance the MMIC technology are described, including integrated microwave/digital functions and a highly integrated transceiver at C-band.

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Cong, Chenhao, Xinlin Li, Wei Xiao, Junru Li, Mingliang Jin, Se Hyun Kim, and Pengfei Zhang. "Electrohydrodynamic printing for demanding devices: A review of processing and applications." Nanotechnology Reviews 11, no. 1 (January 1, 2022): 3305–34. http://dx.doi.org/10.1515/ntrev-2022-0498.

Повний текст джерела

Анотація:

Abstract Electrohydrodynamic (EHD) printing is a cutting-edge micro/nano manufacturing technology for flexible substrates. Generally, EHD printing uses an electric field to drive droplet jet printing, which has characteristics of low cost, simple structure, and high precision. According to the research status of EHD printing at home and abroad, this article mainly focuses on the processing and applications of demanding devices by EHD printing, as well as the influence of associated-processing parameters, with regard to the breakthrough of different kinds of electronic inks developed in recent 5 years. Upon the understanding of the challenges and opportunities from the point of view of engineering applications, optimization strategies for ink selection are put forward for driving EHD printing in various fields of transistors, sensors, biomedicine, and electroluminescent devices.

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Green, M. B., and J. Upton. "Constructed reed beds: appropriate technology for small communities." Water Science and Technology 32, no. 3 (August 1, 1995): 339–48. http://dx.doi.org/10.2166/wst.1995.0156.

Повний текст джерела

Анотація:

Reed bed treatment is put in the context of a major water company’s need to provide reliable, high quality, effluents from small sewage treatment works whilst seeking to minimise running costs. Design and operational information is given for reed bed applications in Severn Trent Water. Performance details are provided for application to secondary, tertiary and storm overflow treatment. The results give particular confidence in the system’s ability to deliver very high quality effluents when used for tertiary treatment, the company’s biggest application. Reed beds work well against less demanding criteria for secondary treatment at small sites and show great promise for storm overflow treatment.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Burrill, Larry D., Barry S. Munro, Mark S. O'Hare, and Koichi Baba. "Strategizing and Executing the Implementation and Utilization of Zone Technology at Philadelphia Naval Shipyard." Journal of Ship Production 6, no. 03 (August 1, 1990): 164–74. http://dx.doi.org/10.5957/jsp.1990.6.3.164.

Повний текст джерела

Анотація:

The strategy in the development and implementation of zone technology at Philadelphia Naval Shipyard (PNS) is discussed. Frank disclosure of the valuable lessons learned and current status is also presented. Equally important is what the future has in store for zone technology at PNSY, which is also described. This paper provides a candid presentation of the experiences in the implementation of zone technology in a demanding repair environment.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Rowe, W. B. "Advances in Hydrostatic and Hybrid Bearing Technology." Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science 203, no. 4 (July 1989): 225–42. http://dx.doi.org/10.1243/pime_proc_1989_203_110_02.

Повний текст джерела

Анотація:

This review outlines the highpoints in the development of hydrostatic and hybrid bearing technology from early plane and cylindrical designs to the wide range of configurations now utilized. The last 20 years have seen increasing sophistication of software for bearing analysis accompanied by application of hybrid bearings to more demanding situations, involving high loads, high speeds and high accuracy. The emphasis in this review is on advances in the realization of the distinctive characteristics of this important group of bearings and on the selection of the design approach for different situations. Applications discussed range from measuring and machine tools to aerospace and heavy power generation equipment. Aspects covered include load coefficients, film stiffness, flow control, hydro-dynamic effects and dynamic behaviour.

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Živković, Slađana. "The ESP Technology-Supported Learning Environment." European Journal of Social Sciences Education and Research 6, no. 1 (April 30, 2016): 154. http://dx.doi.org/10.26417/ejser.v6i1.p154-162.

Повний текст джерела

Анотація:

This paper discusses the implementation of computers and the Internet technology in the learning environment within the ESP context. Designing and implementing digital technology in the teaching and learning process is one of the most demanding tasks. The use of technologies in the ESP classroom enables students to be active and collaborative, which contributes to improving learning achievements and increasing learning outcomes. The ultimate goal is to improve the quality of learning experiences, as well as to produce a highly social and authentic, supportive and productive learning environment that allows students the construction of relevant knowledge. The study examines students’ perceptions towards the implementation of digital technologies in the classroom. The results of the research show that students have very positive attitudes towards computers and the Internet technologies and their integration in the ESP learning environment.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Vikhreva, G. M., and O. P. Fedotova. "TRANSFORMATION OF THE TERRITORIAL EDUCATIONAL SPACE AS A FACTOR OF PERFECTING THE SCIENTIFIC LIBRARY ACTIVITY." Proceedings of SPSTL SB RAS, no. 4 (January 19, 2020): 45–49. http://dx.doi.org/10.20913/2618-7515-2019-4-45-49.

Повний текст джерела

Анотація:

On the example of SPSTL SB RAS, the authors illustrate how transformation of educational value basis affects ideology and technology of library activity, demanding modernization of its contents in the sphere of actual educational environmental construction.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Wang, Guang Hua, and Hui Zheng. "Application of Disaster Recovery Technology in Power Grid Dispatching Automation System." Advanced Materials Research 468-471 (February 2012): 55–59. http://dx.doi.org/10.4028/www.scientific.net/amr.468-471.55.

Повний текст джерела

Анотація:

With the increasing expansion and complexity of the power system structure, the operational reliability of the power grid dispatching automation system has become increasingly demanding. The data’s rapid growth and requirements of high availability and security stimulate the development of the disaster recovery technology which has become a key factor of IT infrastructure. This article describes the disaster recovery technology in details from the measure index and level classification of disaster recovery, and analyzes its implementation process and importance by taking the disaster recovery in the power grid dispatching automation system as an example.

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Wagner, Abraham R., and Paul Finkelman. "Security, Privacy, and Technology Development." Texas A&M Law Review 2, no. 4 (January 2015): 597–633. http://dx.doi.org/10.37419/lr.v2.i4.2.

Повний текст джерела

Анотація:

The evolution of modern communications and information technology sparked a revolution of unprecedented proportions, bringing about an explosion in terms of users and capabilities, as well as increasing demands for both security and privacy. To meet these security demands, new technologies are evolving that can in fact provide a secure and protected environment. At the same time, however, the technology-development path is being increasingly impacted by two other major dynamics: the legal environment and user expectations with respect to privacy. Within the past four years in particular, several major court decisions as well as the official release of documents and illicit “leaks” have drawn enormous attention to what privacy protections must be afforded to various types of data and communications. Users, increasingly aware of intrusions into their data and communications—ranging from intelligence services to hackers and criminals—are demanding greater levels of protection. While technological approaches to greater privacy are possible, they are not costfree— particularly in terms of the computational overhead and other constraints imposed on new systems.

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Janů, Přemysl, and Barbora Odvárková. "An intelligent barrier using ultrasonic technology." Journal of Electrical Engineering 73, no. 5 (September 1, 2022): 343–49. http://dx.doi.org/10.2478/jee-2022-0046.

Повний текст джерела

Анотація:

Abstract The article is devoted to the complete design of an intelligent barrier that uses piezoelectric ceramic transducers as transmitter of an acoustic signal and as a receiver. There is a relatively rich device base on the market for these transducers. These transducers are also not economically demanding. The barrier is composed of three identical bars. A continues wave rectangular signal generation is used for excitation of the converters on the transmitting side. The receiving side is more complex. A signal from the receiving transducer is first analog pre-processed and converted to logical values of 0 or 1. Subsequently, these signals are processed in a microcontroller system, evaluated and a possible alarm of a presence of an intruder is signaled using a display, a light-emitting diode and a piezoelectric siren. The display also shows the number of alarms. Some intelligence is added to the system by classifying a potential intruder. The functionality of the system is verified in a detail and discussed.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Valora, Gabriele, Carmela Bonaccorso, Alessio Cesaretti, Cosimo G. Fortuna, Anna Spalletti, and Fausto Elisei. "Metal complexes with sterically demanding phenanthroline ligands: A combined spectroscopic study." Dyes and Pigments 187 (March 2021): 109150. http://dx.doi.org/10.1016/j.dyepig.2021.109150.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Akhtar, Zia. "Forfeiture of leases, waiver of the right of entry and mixed use property in English law." European Property Law Journal 11, no. 1-2 (November 1, 2022): 62–72. http://dx.doi.org/10.1515/eplj-2022-0002.

Повний текст джерела

Анотація:

Abstract Forfeiture is a contractual right under the lease which is a right preserved under Section 24 (2) of the Landlord and Tenant Act 1954. Landlords need to be careful when demanding or accepting rent when they become aware of a breach of a term. If a landlord wants to forfeit as a result of a breach (and they have the right to forfeit as is provided for in their lease) and there is rent due, they should not demand or accept rent accruing beyond the date they become aware of the breach, as this would likely amount to a waiver. Under section 146 notice under the Law of Property Act (LPA) 1925 to indicate an intention to forfeit the lease the landlords need to be careful when demanding or accepting rent when they become aware of a breach of a term. This article will consider the process of forfeiture in English law and the consequences of waiver by the landlord of breach of term in the lease.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Tong, Xin, Xiaolin Yang, and Xiao Ma. "Discussion on the Intelligent Design of Ultra-Low Energy Consumption Passive Buildings." Frontiers Research of Architecture and Engineering 2, no. 2 (June 4, 2019): 20. http://dx.doi.org/10.30564/frae.v2i2.681.

Повний текст джерела

Анотація:

With the continuous development of science and technology and the gradual improvement of modern building technology, people pay more and more attention to the introduction of advanced technology in architectural design, such as the application of intelligent technology. With the increasingly severe environmental situation, people are increasingly demanding the environmental performance and green performance of buildings. The establishment of ultra-low energy consumption passive buildings has become one of the key construction contents of construction projects. This paper mainly analyzes the design points and architectural forms of related buildings from the perspective of intelligent control.

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Li, Dongjian(Don), and Vasisht Venkatesh. "RECENT ADVANCES IN TITANIUM TECHNOLOGY IN THE UNITED STATES." MATEC Web of Conferences 321 (2020): 01007. http://dx.doi.org/10.1051/matecconf/202032101007.

Повний текст джерела

Анотація:

Substantial progress has continued in the US since the last (13th) World Titanium Conference with regards to titanium technology, products, processing, computational modeling tools and applications. Titanium components produced by additive manufacturing have been qualified and achieved production applications in commercial and military aircraft hardware. New high-performance titanium alloys have been developed for higher temperature service and applications requiring more demanding static and dynamic properties. Current production processes for titanium have been optimized, and new processes have been developed to further reduce cost and improve product quality. Titanium suppliers, OEM’s, government labs and academia are working closely together to address fundamental industry-wide issues. Computer modeling is now used extensively in industrial and research facilities to accelerate the pace and success of these developments.

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Tajboš, J., and T. Lukáč. "New technique and technology of industrial splitting of stacked wood – log-splitter WS 800." Research in Agricultural Engineering 51, No. 1 (February 7, 2012): 20–27. http://dx.doi.org/10.17221/4897-rae.

Повний текст джерела

Анотація:

Wood splitting, manual as well as mechanized one is a heavy work. It follows from the fact that usually the wood of the least quality, knot wood with scroll fibres, directed for less valuable assortments from the point of view of the price. Present technique on the contrary is relatively price demanding, requesting besides 2–4 members of operating personnel also adequate concentration of wood mass for the reason of the complete process economic efficiency. We submit in this paper technology analysis of the splitter WS 800 performance with the original concept for the wood manipulation and splitting process as well. Essential advantages of the mentioned splitter comparing with the stationary equipments are operational and interoperational wood manipulation, physical effort and operating personnel elimination, while the efficiency and work safety is increasing.

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Jang, Joo Hwan, Nam Yong Jee, and Seung Yup Roh. "A Comparison on the Productivity of Lightweight Concrete Wall Method and RC Bearing Wall Method." Advanced Materials Research 374-377 (October 2011): 1342–46. http://dx.doi.org/10.4028/www.scientific.net/amr.374-377.1342.

Повний текст джерела

Анотація:

It was the much more variation through the development of technology of housing construction and the change of life cycle of occupation and it is the same to construct the apartment. In early age to adopt the apartment, the rahmen method was main course but the RC bearing wall method is the main course nowhere. However, the RC bearing wall method was the course to increase a wet method and to increase a wet method was a longer a construction duration & input an abundant labor and it is the actual condition to drop a qualification for increasing the unit cost of construction & oncoming age of a skilled worker & a skill falling. So, it is going to be higher the demanding of dry wall method to be changeable throughout being the higher of social demanding on the long-life housing of demanding recently. Therefore, in this study, it would compare & analyze the productivity of lightweight concrete dry wall method (LDWM) and the RC bearing wall method (BWM).

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Meyer, Andreas, and Hans-Jürgen Zimmermann. "Applications of Fuzzy Technology in Business Intelligence." International Journal of Computers Communications & Control 6, no. 3 (September 1, 2011): 428. http://dx.doi.org/10.15837/ijccc.2011.3.2128.

Повний текст джерела

Анотація:

Fuzzy Set Theory has been developed during the last decades to a demanding mathematical theory. There exist more than 50,000 publications in this area by now. Unluckily the number of reports on applications of fuzzy technology has become very scarce. The reasons for that are manifold: Real applications are normally not single-method-applications but rather complex combinations of different techniques, which are not suited for a publication in a journal. Sometimes considerations of competition my play a role, and sometimes the theoretical core of an application is not suited for publication. In this paper we shall focus on applications of fuzzy technology on real problems in business management. Two versions of fuzzy technology will be used: Fuzzy Knowledge based systems and fuzzy clustering. It is assumed that the reader is familiar with basic fuzzy set theory and the goal of the paper is, to show that the potential of applying fuzzy technology in management is still very large and hardly exploited so far.

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Andrews, Gavin P. "Advances in solid dosage form manufacturing technology." Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 365, no. 1861 (September 13, 2007): 2935–49. http://dx.doi.org/10.1098/rsta.2007.0014.

Повний текст джерела

Анотація:

Currently, the pharmaceutical and healthcare industries are moving through a period of unparalleled change. Major multinational pharmaceutical companies are restructuring, consolidating, merging and more importantly critically assessing their competitiveness to ensure constant growth in an ever-more demanding market where the cost of developing novel products is continuously increasing. The pharmaceutical manufacturing processes currently in existence for the production of solid oral dosage forms are associated with significant disadvantages and in many instances provide many processing problems. Therefore, it is well accepted that there is an increasing need for alternative processes to dramatically improve powder processing, and more importantly to ensure that acceptable, reproducible solid dosage forms can be manufactured. Consequently, pharmaceutical companies are beginning to invest in innovative processes capable of producing solid dosage forms that better meet the needs of the patient while providing efficient manufacturing operations. This article discusses two emerging solid dosage form manufacturing technologies, namely hot-melt extrusion and fluidized hot-melt granulation.

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Van Schoors, Rani, Jan Elen, Annelies Raes, and Fien Depaepe. "Tinkering the Teacher–Technology Nexus: The Case of Teacher- and Technology-Driven Personalisation." Education Sciences 13, no. 4 (March 28, 2023): 349. http://dx.doi.org/10.3390/educsci13040349.

Повний текст джерела

Анотація:

Teacher-driven personalisation can be challenging to facilitate, especially in large heterogeneous classes and during demanding courses. Because of the growing digitalisation, more possibilities arise towards technology-driven personalisation. Nonetheless, little is known about how teachers interact with or implement digital personalised learning (DPL) tools in the classroom. This study explores two research questions: (RQ1) what personalisation strategies are enacted by teachers while implementing a DPL-tool for programming? and (RQ2) how does the teacher–technology interaction take shape? A qualitative multiple case study was established, comprising four cases (two pairs of co-teachers and two teachers who teach individually) implementing a DPL-track for programming in first grade of secondary education (12-to-14-year-old students). Within-case and cross-case analyses of interviews and observations revealed that, although the technology-driven personalisation remained unchanged over the cases, teachers used different personalisation strategies while enacting the DPL-track. Subsequently, various forms of the teacher–technology relationship were observed. Based on the findings, (1) a teacher–technology interaction continuum and (2) a new concept, i.e., ‘the teacher–technology nexus’, are presented as they can be of value for the elaboration of theory on the implementation of DPL-tools in real life classrooms.

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Blicharski, Tomasz, Katarzyna Swiader, Anna Serefko, Sylwia Kulczycka-Mamona, Michal Kolodziejczyk, and Aleksandra Szopa. "Challenges in technology of bilayer and multi-layer tablets: a mini-review." Current Issues in Pharmacy and Medical Sciences 32, no. 4 (December 1, 2019): 229–35. http://dx.doi.org/10.2478/cipms-2019-0039.

Повний текст джерела

Анотація:

Abstract Bilayer and multi-layer tablets are enjoying growing popularity among original drug and generic product manufacturers. Multi-layer tablets have many key benefits compared to classic immediate-release tablets. The use of such solid oral dosage forms simplifies dosing regimens in combination therapy, and thus improves patient compliance. However, the technology of multilayer tablets is demanding and requires precise choice of excipients and production parameters with regard to each technological step. The main benefits of multi-layer tablets, certain aspects of their production and the challenges encountered during the compression process are reviewed in this paper.

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Currie, Janet, Henrik Kleven, and Esmée Zwiers. "Technology and Big Data Are Changing Economics: Mining Text to Track Methods." AEA Papers and Proceedings 110 (May 1, 2020): 42–48. http://dx.doi.org/10.1257/pandp.20201058.

Повний текст джерела

Анотація:

The last 40 years have seen huge innovations in computing and in the availability of data. Data derived from millions of administrative records or by using (as we do) new methods of data generation such as text mining are now common. New data often requires new methods, which in turn can inspire new data collection. If history is any guide, some methods will stick and others will prove to be a flash in the pan. However, the larger trends toward demanding greater credibility and transparency from researchers in applied economics and a 'collage' approach to assembling evidence will likely continue.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Zhou, Jian, Xing Hua Li, Li Jun Li, Dong Cheng Zhou, and Ke Cheng. "Study of Manufacturing Battery-Grade Co₃O₄ of Sphere-Shape." Advanced Materials Research 197-198 (February 2011): 444–47. http://dx.doi.org/10.4028/www.scientific.net/amr.197-198.444.

Повний текст джерела

Анотація:

For getting higher quality and sphere shape product Co3O4.The article studies precursor baked temperature,baked time, baked temperature route, Baked condition affecting on dapparent, then points out obtaining sphere shape Co3O4technology. Test shows if the practice is accorded to the technology strictly,demanding standard Co3O4can be obtained.

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Valsaraj, Vani. "Vehicle Speed Information." Volume 5 - 2020, Issue 9 - September 5, no. 9 (October 2, 2020): 867–68. http://dx.doi.org/10.38124/ijisrt20sep649.

Повний текст джерела

Анотація:

Road accidents have been very common in the present world with prime cause being careless driving. It is very necessary to identify the careless driver. However, with the advancement in the technology, different governing bodies are demanding some sort of computerized technology to control the driving speed of drivers. At this scenario, we are proposing system to detect vehicle speed been driven the given maximum speed of vehicles the respective roads or highway limits.

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Qian, Ying, Hong Liang, and Wen Tao Wang. "Application of WebGIS Technology in Hazardous Waste Management System." Applied Mechanics and Materials 768 (June 2015): 693–97. http://dx.doi.org/10.4028/www.scientific.net/amm.768.693.

Повний текст джерела

Анотація:

With the growth of industry, hazardous waste discharged from industrial production process increases with time goes by. Due to the lack of technics and experiences in managing and dealing with hazardous waste, the method for dealing with hazardous waste in our country remains in a low level. This paper aims at the demanding requirements of information management of hazardous waste disposal center in Kunming City, designed and developed a comprehensive information platform based on the basic hazardous waste data in and around Kunming City, integrated with WebGIS and spatial database technology to realize the digitalized and visualized management to the hazardous waste. This paper firstly elaborates structural design of the whole system. Then it introduces the functional and spatial database design. In the end, this paper demonstrated some of the results of this system.

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Nunes, João Pedro, and Joao F. Silva. "Production of Thermoplastic Matrix Towpregs for Highly Demanding and Cost-Effective Commercial Applications." Materials Science Forum 730-732 (November 2012): 1030–35. http://dx.doi.org/10.4028/www.scientific.net/msf.730-732.1030.

Повний текст джерела

Анотація:

This work reviews the work made in last years to produce thermoplastic matrix towpregs to highly demanding and more cost-effective commercial applications using a powder coating technology developed in Portugal by Minho and Porto Universities. Different thermoplastic matrices and continuous fibre reinforcements were used in the towpregs produced for highly demanding markets (e.g., carbon fibre reinforced PrimospireÒ towpreg) and for more commercial applications (e.g., glass fibre reinforced polypropylene and polyvinyl chloride towpregs). The relevant processing parameters, such as, fibre pull-speed and furnace temperature were varied to determine their influence on the polymer mass fraction obtained in the studied raw materials. Several technologies were also developed and used (compression moulding, pultrusion and filament winding) to process composite parts with adequate properties for the envisaged markets at compatible production rates. The obtained results lead us to conclude that the studied thermoplastic matrix towpregs and their processed composite parts have very interesting conditions for being applied both in highly advanced and cost-effective markets.

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Pyrhönen, J., O. Pyrhönen, M. Niemelä, J. Luukko, J. Kaukonen, and P. Pohjalainen. "Direct torque control of synchronous motor drives for dynamically demanding applications." European Transactions on Electrical Power 10, no. 5 (September 7, 2007): 297–304. http://dx.doi.org/10.1002/etep.4450100505.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Reid, Louise, and Katherine Ellsworth-Krebs. "Demanding expectations: Exploring the experience of distributed heat generation in Europe." Energy Research & Social Science 71 (January 2021): 101821. http://dx.doi.org/10.1016/j.erss.2020.101821.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Xu, Tian Wei, Yong Feng Deng, and Chun Guang Lin. "Analysis on Garden Irrigation for the Recycling and Use of Reclaimed Water." Applied Mechanics and Materials 484-485 (January 2014): 479–83. http://dx.doi.org/10.4028/www.scientific.net/amm.484-485.479.

Повний текст джерела

Анотація:

The lack of water resource is the resource and environmental problem of various countries in the current international environment face, and a better way to solve the shortage of water resource is to adopt the reclaimed water for civil irrigation. But the development of science and technology in China started late, it leads to that our country doesnt have deep experience in the use of the reclaimed water application technology, thus, the development and requirements of this technology in the domestic world are very urgent and demanding. In this paper, the author makes a detailed technology requirement explanation for the technology requirement level of supervision, technology, technics and management aspect on wastewater reuse technology.

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Sourkounis, Constantinos, and Pavlos Tourou. "Grid Code Requirements for Wind Power Integration in Europe." Conference Papers in Energy 2013 (June 4, 2013): 1–9. http://dx.doi.org/10.1155/2013/437674.

Повний текст джерела

Анотація:

As the capacity of wind power continues to increase globally, stricter requirements regarding grid connection of wind generators are introduced by system operators. The development of wind turbine technology is inevitably affected by the new grid codes, and wind power plants are expected to support the grid and provide ancillary services much like conventional power plants. The most demanding regulations are found in Europe where wind penetration levels are higher. This paper presents the main aspects of current grid code requirements for the integration of wind power in European countries and suggests performance characteristics in order to satisfy the most demanding requirements. The dynamic behavior of wind turbines with doubly fed induction generators is investigated and a solution for low voltage ride through compliance is presented.

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Ding, Xue Feng. "The Study of Substation Automation and Control Systems." Applied Mechanics and Materials 203 (October 2012): 167–70. http://dx.doi.org/10.4028/www.scientific.net/amm.203.167.

Повний текст джерела

Анотація:

The power system expansion and improvement of the level of modernization, especially in computer control technology to improve the reliability of the substation control and protection systems security line of economy and availability have become increasingly demanding, with the automation technology computer technology and development of communication technologies, substation automation technology have developed rapidly, many designed by the new principles of the new concept of integrated substation automation system put into operation, to demonstrate its strong vitality, but also to promote the integrated substation automation technology to the rapid diffusion and application, and to become power industry to implement one of the key technological advances.

Стилі APA, Harvard, Vancouver, ISO та ін.

Статті в журналах з теми "DEMANDING TECHNOLOGY"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями