Добірка наукової літератури з теми "Daylight metric"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Daylight metric".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Daylight metric"
Dogan, T., and YC Park. "Testing the residential daylight score: Comparing climate-based daylighting metrics for 2444 individual dwelling units in temperate climates." Lighting Research & Technology 52, no. 8 (June 17, 2020): 991–1008. http://dx.doi.org/10.1177/1477153520924838.
Повний текст джерелаGábrová, Lenka. "Comparison between Dynamic and Static Metrics for Daylight Evaluation in the Case of Obstructed Buildings." Applied Mechanics and Materials 861 (December 2016): 477–84. http://dx.doi.org/10.4028/www.scientific.net/amm.861.477.
Повний текст джерелаLee, Jaewook, and Mohamed Boubekri. "INTRODUCTION OF NEW DAYLIGHTING METRICS FOR HEALTH, WELLBEING, AND FEASIBILITY: A STUDY OF THE INDOOR BUILDING ENVIRONMENT." Journal of Green Building 17, no. 1 (January 1, 2022): 105–26. http://dx.doi.org/10.3992/1943-4618.17.1.105.
Повний текст джерелаLee, Jaewook, and Mohamed Boubekri. "INTRODUCTION OF NEW DAYLIGHTING METRICS FOR HEALTH, WELLBEING, AND FEASIBILITY: A STUDY OF THE INDOOR BUILDING ENVIRONMENT." Journal of Green Building 17, no. 1 (January 1, 2022): 105–26. http://dx.doi.org/10.3992/jgb.17.1.105.
Повний текст джерелаKeskin, Zeynep, Yunhao Chen, and Steve Fotios. "Daylight And Seating Preference In Open-Plan Library Spaces." International Journal of Sustainable Lighting 17 (June 2, 2017): 12–20. http://dx.doi.org/10.26607/ijsl.v17i0.12.
Повний текст джерелаBoubekri, Mohamed, and Jaewook Lee. "A COMPARISON OF FOUR DAYLIGHTING METRICS IN ASSESSING THE DAYLIGHTING PERFORMANCE OF THREE SHADING SYSTEMS." Journal of Green Building 12, no. 3 (September 2017): 39–53. http://dx.doi.org/10.3992/1943-4618.12.3.39.
Повний текст джерелаRuiz, Alejandro, Miguel Ángel Campano, Ignacio Acosta, and Óscar Luque. "Partial Daylight Autonomy (DAp): A New Lighting Dynamic Metric to Optimize the Design of Windows for Seasonal Use Spaces." Applied Sciences 11, no. 17 (September 4, 2021): 8228. http://dx.doi.org/10.3390/app11178228.
Повний текст джерелаWienold, J., T. Iwata, M. Sarey Khanie, E. Erell, E. Kaftan, RG Rodriguez, JA Yamin Garreton, et al. "Cross-validation and robustness of daylight glare metrics." Lighting Research & Technology 51, no. 7 (March 14, 2019): 983–1013. http://dx.doi.org/10.1177/1477153519826003.
Повний текст джерелаDogan, T., and YC Park. "A critical review of daylighting metrics for residential architecture and a new metric for cold and temperate climates." Lighting Research & Technology 51, no. 2 (February 1, 2018): 206–30. http://dx.doi.org/10.1177/1477153518755561.
Повний текст джерелаHraška, Jozef. "Nonvisual aspects of daylight in the built environment." IOP Conference Series: Materials Science and Engineering 1252, no. 1 (September 1, 2022): 012063. http://dx.doi.org/10.1088/1757-899x/1252/1/012063.
Повний текст джерелаДисертації з теми "Daylight metric"
Khairy, Al Madhoon Nada. "Improving Daylight Qualities in Medelhavsmuseet." Thesis, KTH, Ljusdesign, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-280071.
Повний текст джерелаBrembilla, Eleonora. "Applicability of climate-based daylight modelling." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/28239.
Повний текст джерелаRahimzadeh, Shahab Din. "Use of parametric modelling and climate-based metrics for the efficient design of daylight strategies in buildings with complex geometries." Thesis, Queensland University of Technology, 2015. https://eprints.qut.edu.au/83236/4/Shahab_Rahimzadeh_Thesis.pdf.
Повний текст джерелаRice, Edward Oren. "Daylight in façade renewal : using new metrics to inform the retrofitting of aging modern-ear façade types." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/35496.
Повний текст джерелаIncludes bibliographical references (leaves 75-78).
New methods for quantifying daylight are increasingly accessible to designers and planners. While these methods have enabled new building facades to better balance the admission of daylight with the maintenance of thermal control, they have generally not been applied to the existing building stock. This project uses these new methods of quantifying daylight to inform the renewal of aging facades on the MIT campus. The goal is to demonstrate how daylight analysis can inform the retrofitting process of prevalent modern-era facade types in need of renewal. The work shows how using these metrics in evaluating light access, facade type, and an array of retrofit measures in campus planning is helpful in understanding how intervention might enhance the use of daylight.
by Edward O. Rice.
S.M.
Jakubiec, John Alstan. "The use of visual comfort metrics in the design of daylit spaces." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/91295.
Повний текст джерелаThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 137-144).
It is desirable to design buildings with natural daylight and views to the outside, which can maximize passive solar heating, minimize electric lighting use and contribute to feelings of wellbeing and awareness. Unfortunately, the presence of daylight is not always a positive one. Excessive brightness, strong contrast or intense reflections from daylight can cause visual discomfort or the inability to perform tasks. Typically, the total amount of luminous flux incident upon a surface per unit area - illuminance - present is used to predict visual discomfort due to questions about the benefit and validity of luminance-based analysis measures that are more related to the way the human visual system perceives light. This thesis aims to advance the understanding and usefulness of visual comfort prediction to the point that it can become commonly used in architectural design processes. One method through which this is achieved is by testing the ability of visual comfort analysis to resolve subjective occupant comfort. It was found that of existing discomfort glare metrics, daylight glare probability (DGP) was the most likely to perform well in a variety of daylight conditions and space types. Furthermore, a long-term simulation and survey study found that between 53.7% and 70.1% of an occupant's visual satisfaction could be resolved by analyzing DGP, the presence of direct sunlight and predicted monitor contrast ratio. This choice of metrics was reinforced by a separate laboratory study, which found that 74.4% of subjective comfort could be resolved and identified new subjective luminance thresholds that identify likely discomfort. A new adaptive visual comfort model, the 'adaptive zone,' is proposed in this thesis to deal with spatiality and view in visual discomfort analysis. Finally, ways of applying these verified and new measures in design processes are tackled in this work by producing new temporal maps, spatial discomfort analysis, and plan-based mappings of visual satisfaction.
by John Alstan Jakubiec.
Ph. D. in Architecture: Building Technology
Borodinova, Baiba. "Inner yard building occupant’s perception versus the computer simulated metrics of daylight : Field study and simulation-based analysis of inner yard building." Thesis, KTH, Ljusdesign, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-233840.
Повний текст джерелаLundgren, Marja. "Performance in the Swedish Building Code : An Inquiry into the Consequences for Architectural Design of the Formulation and Assessment of Performance Requirements." Licentiate thesis, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-257892.
Повний текст джерелаLicentiatavhandlingen undersöker hur funktionsbaserade byggregler påverkar arkitekturförutsättningar i Sverige. Ett av målen med funktionskrav i byggregler är att uppmuntra till innovation och frihet i valet av byggnadsutformning (design), lösningar och metoder (Foliente 2000; Sigge 2017, 181-187; prop. 1985, 100). De tvådelade syftet med avhandlingen är dels att undersöka om gällande svenska byggregler är formulerade så att det frihetsutrymme som funktionsregler är avsedda att skapa i praktiken även omfattar arkitekturutformning med hänsyn till byggnadsvolym, form, program (planlösningar), fasader och andra arkitekturaspekter, dels att undersöka av vilka professioner och hur funktionskrav utvärderas under designprocessen. De funktionskrav som undersöks har en bas i byggnadsfysiska förklaringsmodeller. Analysen sker utifrån perspektivet att frihet i arkitekturlösningar ska möjliggöras. Undersökningen görs genom två fallstudier i två artiklar och efterföljande diskussioner i avhandlingens kappa. I den första artikeln analyseras funktionskravet på energiprestanda i Boverkets byggregler (BBR) utifrån hur kravformuleringen påverkar arkitektur och energianvändning. Energiprestandakravet i BBR är en nationell tolkning av EU-direktivet om energiprestanda (EU 2010; 2018). Den andra artikeln studerar hur funktionskrav kan utvärderas disciplinärt. Den har jag skrivit tillsammans med Malin Alenius, min doktorand- och Whitekollega. Avhandlingen består av två artiklar och en kappa. Kappan är indelad i fem huvudsakliga delar, där den inledande delen redogör för syfte, forskningsfrågor och metod. Den innehåller även en forskningsöversikt som behandlar internationell forskning om funktionsbaserade byggregler, forskning om relationen mellan energi och arkitektur samt arkitekturforskning om byggnadsfysik och arkitektur. Därefter följer de båda artiklarna med tillhörande diskussioner. I den fjärde och avslutande diskussionsdelen i kappan, ”Juxtaposition”, sammanförs de teman som tagits upp i artiklarna i en övergripande diskussion. Därefter följer konklusion på engelska och denna svenska sammanfattning. De båda artiklarna relaterar till den övergång som under de senaste femtio åren i Sverige har skett från byggregler som föreskriver på vilket sätt samhällets krav i planering- och byggande ska uppfyllas till byggregler som föreskriver den funktion som den slutliga byggnaden ska uppvisa. Drivkrafterna i denna transformation har sedan sent 1960-tal varit att rationalisera byggandet, ekonomisera fastighetsutveckling och att stödja en snabbare teknisk utveckling (Sigge 2017, 71; SOU 1974, 202-203). I propositionen till plan- och bygglagen 1987 uttryckte regeringen att de föreskrifter som styr byggande så långt som möjligt bör formuleras som funktionskrav (prop. 1985, 100). Friheten att utforma lösningar nämns ofta som en grundläggande egenskap i funktionskravsbyggregler (Foliente 2000; Meacham et al 2005). I den första artikeln är syftet att undersöka huruvida de funktionskrav i Boverkets byggregler (BBR) som är utformade efter byggnadsfysiska förklaringsmodeller styr eller inte styr arkitekturlösningar. Detta görs i den första artikeln genom analysen av energiprestandakravet i BBR. Artikeln utgår ifrån tre frågeställningar av vilka den första tar sin utgångspunkt i att Boverket 2004 definierade funktionskrav som krav på en egenskap hos byggnad eller del därav och som ska uttryckas i termer som inte begränsar valet av utformning, material och metoder (Boverket 2004, 42). Den andra två frågeställningarna handlar dels om hur den svenska tolkningen styr energianvändning och dels om hur BBR skulle skrivas för att uppfylla direktivet utan att begränsa valet av utformning eller påverka arkitekturkvalitet och inomhusmiljö negativt. I artikeln konstateras att formuleringen av systemgränserna för energiprestanda i BBR, som beskriver vad som ska beräknas och mätas, omfattar byggnadens energianvändning, inklusive fastighetsel och driftsbelysning (med driftsbelysning avses här belysning till trapphus och driftsutrymmen), men inte verksamhetens el- och belysningsbehov. Den svenska tolkningen styr byggnadsutformning och energianvändning på ett sätt som jag menar skiljer sig från energiprestandadirektivets inriktning (EU 2010). Diskussionen som följer på artikeln i avhandlingen visar att energiprestandadirektivet efter dess uppdatering 2018 lägger en ännu tyngre emfas på dagsljus i lokaler än i det tidigare direktivet från 2010 (EU 2010; 2018), varför den kritik som riktades i artikel I med avseende på att energiprestandakravet i BBR inte omfattar dagsljus och belysning för verksamheten är fortsatt aktuell. Artikeln illustrerar hur delikat uppgiften är att formulera funktionskrav utifrån ambitionen att funktionskrav ska ge frihet att utforma lösningar (Boverket 2004, 42). Artikeln och den efterföljande diskussionen visar även att formuleringarna av funktionskraven för energi respektive dagsljus i BBR skapar motstridiga grundförutsättningar för att uppnå kraven, vilket innebär att kraven konkurrerar med varandra. Risken med sådana konkurrerande funktionskrav i BBR är att de skapar hinder i projekt att uppnå de samhällskrav som plan- och bygglag och plan- och byggförordning anger. Artikel I och efterföljande diskussion visar på behovet av analyser av funktionskrav inför regelskrivning utifrån dess formkonsekvenser med avseende på utformning av volymer, fasader, planer, sektioner om inte friheten att utforma arkitekturlösningar ska begränsas eller leda till att konkurrerande funktionskrav. Utifrån frågeställningen om frihet i avseende på arkitekturlösningar i funktionskravsbaserade byggregler analyseras därtill i diskussionen som följer på artikel I formuleringarna av energikraven i BBR med motsvarande avsnitt i komparation med danska och tyska byggregler så som de såg ut 2016. I jämförelsen mellan tre länders olika tolkningar av energiprestandakravet framgår att de styr utformning olika. Med grund i den jämförelsens analys diskuterar jag att tidigare forskningsrön, om att abstrakt funktionskrav ger större lösningsfrihet (Foliente 2000), inte nödvändigtvis gäller i avseende på frihet för arkitekturlösningar. I avhandlingens forskningsöversikt och diskussionen som följer på artikel I framgår att funktionskravs konsekvenser för arkitekturutformning är ett underutforskat område. Den övergång från mer lösningsföreskrivande till funktionskravsbaserade byggregler som skett i Sverige under det senaste halvseklet har även skett i ett många andra länder internationellt (Meacham 2016, 477). I EU introducerades 1989 ett EU-direktiv om byggprodukter och deras fria rörlighet, där ett antal av byggnaders väsentliga egenskaper som byggprodukter ska uppfylla definierades (EU 1989), vilket är i linje med funktionskrav. Dessa definitioner har sedan införlivats i svensk lagstiftning (Sveriges riksdag 1994; 2010). I avhandlingen analyseras och diskuteras hur den historiska övergången till funktionskravsbaserade byggregler har påverkats inte endast av politiska beslut, utan även av utvecklingen inom ingenjörs- och arkitekturprofessionerna. Tidigare byggregler bestod vanligtvis av geometriska regler eller beskrivna lösningar, som i sin tur byggde på den samlade kunskapen från många discipliner inom projektering och byggande, medan funktionskraven innebar en övergång från rumsliga till abstrakta naturvetenskapliga, ofta matematiska och byggnadsfysiska, modeller som preciserade samhällskraven. I diskussionen till artikel I fördjupas den historiska beskrivningen av hur principerna för regelutformning av funktionskrav har utvecklats från 1967 till 2018 och hur denna utveckling i allt högre grad lett till att arkitekturteknik allt mer delats in i arkitektur respektive teknik. I de första metodbeskrivningarna 1970 i Sverige av hur funktionskravsbaserade byggregler kan formuleras, angav forskaren Jens Knocke som utvecklade principer för en funktionsanalytisk byggnorm, att dessa endast gällde för den ”tekniska” funktionsanalysen. Därmed avsågs krav som styrde materialval och konstruktiv utformning medan så kallade icke tekniska frågor som arkitektur, som konstnärliga och programaspekter, inte behandlades (Knocke 1970, 15, sammanfattning). I den proposition som föregick lagen 1994 (där de väsentliga egenskaperna för byggnadsverk införlivades från EU-direktivet om byggprodukter) skilde regeringen mellan generella krav, som går att kontrollera objektivt och placerades i lagen om tekniska egenskapskrav, och krav som behöver värderas och bedömas lokalt med hänsyn till omgivningen och lokala politiska krav (prop. 1993). Diskussionen utifrån artikel I påvisar att funktionskravsbyggregler kan och har av regeringen uppfattats som objektiva, utan behov av tolkning i de fall dessa kan beräknas och är uttryckta kvantitativt. Artikeln och diskussionen visar samtidigt att bestämningen av ramarna för funktionskraven, exempelvis systemgränser för energiberäkningen och formuleringar av respektive funktionskrav, innehåller avvägningar som i sig omfattar och påverkar utformningsbeslut och det lösningsutrymme som följer. I artikeln visas att formuleringarna av funktionskravet för energiprestanda leder till negativa konsekvenser för friheten i utformning av arkitekturlösningar. Jag argumenterar för att konsekvensanalyser behöver genomföras vid regelgivning av funktionskrav i BBR av flera skäl, bland annat för att undvika att onödiga restriktioner i utformning skapas och för att enskilda funktionskrav inte ska krocka i BBR eller leda till konflikter mellan olika krav i de olika regelhierarkierna BBR och PBL. Detta gäller särskilt mellan funktionskrav i BBR och krav där i PBL där hänsyn i arkitekturutformningen krävs till plats och omgivning (2 kap. 6 § 1 och 8 kap. 1 § 2). Jag argumenterar även för att Boverkets egen definition från 2004, om att funktionskrav ska formuleras så att de inte begränsar valet av utformning, material och metoder, är relevant för byggregelverket och för att nå formuleringar av funktionskrav som uppfyller denna behövs formanalyser av funktionskrav tillämpas inför Boverkets regelgivning. I artikel II och dess efterföljande diskussion behandlas hur kvantitativa funktionskrav utvärderas och utvärderingsformens relation till de professioner som är involverade i designprocessen. Artikeln, som är skriven tillsammans med Malin Alenius som är doktorand vid KTH och kollega vid White, är genomförd i form av aktionsforskning där ett utställningsrum om dagsljus och en konferensartikel om dagsljus analyseras och diskuteras ur ett kunskapsperspektiv med fokus på arkitekturdisciplinen och arkitekturprofessionen. Artikeln innehåller dels en analys av en tidigare genomförd utställning, som Alenius och jag ansvarade för och som vi genomförde tillsammans med kollegor vid White, dels en jämförande analys av valda representationstekniker och av dagsljusfaktorresultaten i utställningen med en större numerisk studie av funktionskravet för dagsljus. Den numeriska studien har genomförts av forskaren och docenten Marie-Claude Dubois och doktoranden Iason Bournas vid institutionen för arkitektur och byggd miljö vid Lunds Universitet. Resultaten har publicerats i en gemensam konferensartikel som återfinns i Appendix I (Bournas et al 2017). Metoden för urvalet av byggnader utvecklades av mig och Alenius. Både utställningen och den numeriska studien undersökte hur hur hög grad dagens funktionskrav, som i ett allmänt råd till föreskriften anger en dagsljusfaktornivå, uppnås i flerfamiljshus byggda under 1900-talet. I utställningen undersöktes fem byggnader uppförda mellan 1917 till 2016 i relation till såväl dagsljuskravet som solljuskravet (Boverket 2018 c). Dagsljuskravet beräknades och solljusförutsättningarna har undersökts genom skuggstudier. Dagsljus och solljus har även studerats utifrån ett upplevelseperspektiv i en film med sekvenser för varje vardagsrum om 6 sekunder per timma över ett dygn. De fem byggnadernas utformning har även beskrivits i relation till den vid uppförandet rådande lagstiftningen om dagsljus. Till den numeriska studien gjordes ett större urval relaterat till tidsepok och byggnadstakt för respektive tidsepok och i den numeriska studien genomfördes avancerade dagsljusberäkningar av Bournas (2017, 2019) som även undersökte olika former av dagsljusindikatorer (Bournas och Dubois 2018). Även om utställningen och den numeriska studien har olika fokus och olika publiker är de intressanta att jämföra ur ett disciplinärt perspektiv med avseende på hur kvantitativa funktionskrav kan utvärderas och i relation till hur utvärderingsformen samverkar med designprocessen i dess olika skeden. Tyngdpunkten i artikel II ligger på hur arkitekters förståelse för funktionskravets kvantitativa precisering i allmänt råd (dagsljusfaktorn) inverkar på arkitekturutformningen. Den övergripande forskningsfrågan som behandlas i artikel II och den tillhörande diskussionen är: Vilken kunskap behövs för att utvärdera funktionskrav formulerade efter byggnadsfysiska modeller, så att de bidrar till snarare än begränsar arkitekturutformning, byggnadernas program, uttryck och kreativitet och innovation? I relation till denna fråga illustrerar artikeln vikten av arkitektens egna metoder i utvärderingen av byggnadsfysiskt beskrivna funktionskrav. Genom den geometriska redovisningen i utställningen av de fem byggnaderna tydliggörs att grunderna för dagsljusfaktorn ligger i geometri och att arkitektens vanliga ritmetoder med fördel kan samverka med geometriska analyser av dagsljus, som no-skyline och avskärmningsvinklar, särskilt i tidiga skeden av planprocessen. Även tidigare forskning har pekat på vikten av att arkitekter ges möjlighet att utvärdera dagsljuset i relation till arkitekturutformningen utan att i varje läge behöver beräkna densamma (Lewis 2017, 1172). I jämförelsen mellan utställningsmaterialet och redovisningen av den numeriska studien framgår att för dagsljustillgången är avskärmningsfaktorn den avgörande faktorn, redovisade genom en tvådimensionell avskärmningsfaktor i utställningen och en tredimensionell avskärmningsfaktor i konferensartikeln. I jämförelsen av utfallet i dagsljusfaktor mellan olika decennier är resultatet samstämmigt, vilket illustreras i den numeriska studien genom större urval och i utställningen genom det partikulära i de presenterade fem fallen. I den efterföljande diskussionen till artikel II i kappan diskuteras relationen mellan generell kunskap, utifrån teori och instrumentella fallstudier, och partikulär kunskap, kopplad till specifika fall och kontextbeskrivningar (Johansson 2000; 2003; Flyvbjerg 2006; Kirkeby 2009). Utställningen syftade i sig till att sammanföra två olika disciplinära metoder, nämligen arkitekturmetoder och ingenjörs- och byggnadsfysiska metoder, för att beskriva dagsljus. Övergången från byggregler som uttryckte på vilket sätt samhällskraven skulle uppnås till funktionsbaserade byggregler har inneburit att regler (som i fallet med dagsljus) tidigare formulerade som geometriska och rumsliga förhållanden kom att formuleras i numerära storheter, vilka för plan- och arkitektkompetensen framstår som abstrakta, för att inte säga osynliga. I den tidigare lagstiftningen uttrycktes krav för dagsljus genom bestämda geometriska sektioner (1874 till 1930) eller krav på en parametrisk relation där hushöjden skulle motsvara avståndet till närliggande byggnader (1930-1960). I och med de funktionsbaserade byggreglerna introducerades istället dagsljusfaktorn som anger en procentsats av utvändigt ljus som når en mätpunkt i bostadsrummet, vilken kräver beräkning. Sättet att utvärdera om kravet är uppfyllt har med andra ord gått från en ritningsbaserad kontroll till en matematisk beräkning, som idag ofta utförs av personer med specialistkompetens. Det innebär att förutsättningarna för att uppnå kravet på dagsljus inte alltid är transparenta för planeraren eller arkitekten. I diskussionen lyfts att det finns en risk med att lägga ut delar av utvärderingen på andra professioner utan kunskapsåterföring då det i kan bidra till en minskad helhetssyn i designprocessen. Alenius och jag menar att fallstudier, som i likhet med de fem fall som undersöktes i utställningen, där det partikulära tillsammans med en undersökande fråga är en produktiv väg för att utveckla kunskap som är relevant för arkitekturpraktiken. Fallstudier, där byggnader analyseras individuellt kan sägas vara typisk för arkitekturkompetensen (Johansson 2000; 2003). Detta särskilt för att stödja kunskapsuppbyggnaden hos arkitekter genom många fall. Begreppet repertoar har beskrivits som när en mängd empiriska fallstudier samlas i praktikerns minne och aktiveras under designprocessens lösningssökande faser (Jansson 1995, 52-53). Vi menar att ett mer systematiskt användande av fallstudier behövs för att bygga en repertoar som belyser ämnen som påverkar arkitektens vardag, som exempelvis dagsljus, hållbarhet och byggregler. Sammanfattningsvis argumenterar Alenius och jag för att i diskutioner av funktionskrav bör inte arkitekturmetoder, som fallstudier och repertoar, hamna i bakgrunden till förmån för en mer generell kunskapsuppbyggnad som har sin grund i naturvetenskapliga modeller som exempelvis de byggnadsfysiska förklaringsmodellerna. Funktionskravens frihetsramar tolkas i hög grad idag genom generell teori och instrumentella fallstudier. Här finns en risk att den underliggand frågeställningen för den generella teorin är för begränsande utifrån ett gestaltningsperspektiv. Det är av vikt att arkitekter medverkar i utvecklingen av frågeställningarna och ramarna för de teorier som utvecklas, så att ett tillräckligt antal typologier, rumstyper, program och fasadutformningar undersöks om resulaten ska generalisera förutsättningarna för desamma. Samtidigt finns en begränsning i vad som kan undersökas på detta sätt. I kappan utvecklas diskussionen kring varför båda dessa former av kunskapsinhämtning har sin plats i designprocessen och att det är av största vikt, särskilt i relation till funktionsbaserade byggregler, att inte låta den generella kunskapen dominera utan att hitta en balans mellan generell och partikulär kunskap från specifika fall. Det finns ven förutsättningar för att arkitektens verktyg i högre grad kan användas för att både utvärdera de kvantitativa krav som ställs i BBR och för att skapa en större förståelse för dem. En ökad integration av utvärdering av byggnadsfysiska funktionskrav genom arkitektens traditionella verktyg skapar även större möjligheter för en designprocess som behandlar funktionskrav och samtidigt tar in de aspekter av utformning som inte kan kvantifieras. Sammanfattningsvis visar artikel II att ett noggrant urval av fallstudier som presenteras i sin ursprungliga kontext och komplexitet kan ge arkitekten kunskap om byggnadsfysiska arkitekturförutsättningar som komplement till den vägledning som generell teori kan ge. På grund av kvantifiering och avancerade beräkningsverktyg har dagsljuskraven i svenska byggregler på senare år kommit att bli en vardag för arkitekter. Dagsljuskraven i sig, och dess utvärderingar, ger dock inte nödvändigtvis ny kunskap till arkitekten om inte en erfarenhetsåterföring i relation till dessa systematiseras och relateras till skissprocessen, särskilt med avseende på tidiga skeden. Ett sådant exempel finns redovisat i appendix II där generell teori från forskning gav en kunskapsgrund i form av tumregler för ett tävlingsarbete. Även om erfarenhetsåterföring ökar kring beräkningar återstår ett behov för arkitekturpraktiken att utveckla kunskap som placerar de individuella funktionskraven i designuppgiften och designkunnandet som helhet, vilket kopplar till tidigare argument för behov avkunnande som ackumuleras genom en repertoar baserad på det partikulära och som är grundad i arkitektens egna verktyg och då särskilt fallstudien. I fallet med dagsljus behöver den kvantitativa utvärderingen sättas i relation till kvalitativa aspekter av dagsljus som traditionellt har utvecklats som ett kunnande hos arkitekten genom betraktande av byggnader och rum under verkliga dagsljusförhållanden. Till de två artiklarna och dess diskussioner läggs ytterligare ett perspektiv genom den avslutande diskussionen (”Juxtaposition”) om en möjlig väg till en forskningsdiskurs om byggnadsfysik ur ett arkitekturperspektiv. Inledningsvis diskuteras förutsättningarna för ett samtal mellan designprofessioner utifrån tre konceptioner av kunskap (Downton 2003, 62-63). Den kunskap som erövras genom att praktisera (”knowing-how”), den teoretiska kunskapen om principerna (”knowing-that”) och den orienterande kunskapen (”knowing-of”) (Downton 2003, 62-63). Arkitekter är ofta tränade i grunderna och principerna för konstruktion (”knowing-that” och ”knowing-of”) men sällan, särskilt i Sverige, tränade i att utföra konstruktionsberäkningar (”knowing-how”). Att arkitekter är tränade i ”knowing-that” och ”knowing-of” om konstruktion hävdar jag skapar bättre förutsättningar för samverkan mellan arkitekter och konstruktörer än om så inte varit fallet. Det skiljer sig från hur det förhåller sig med energi, dagsljus och andra funktionskrav som har utvecklats ur byggnadsfysiska förklaringsmodeller och relationen mellan arkitekter och energi- och installationsingenjörer. Här saknar arkitekterna, inte minst de svenska, ofta kunskap om principerna (”knowing-that” och ”knowing-of”). Jag argumenterar för att en sådan kunskap skulle skapa bättre förutsättningar för arkitekten i sin verksamhetsutövning och samverkan med andra discipliner. I Sverige utbildas arkitekter i konstruktion men inte i byggnadsfysik. Samtidigt har arkitekturforskning, även den internationella, under lång tid visat ett intresse för arkitekturteknik utifrån konstruktion men i mycket lägre grad för byggnadsfysik. En fråga för den avslutande diskussionen är varifrån kan en forskningsdiskurs utvecklas som utifrån ett arkitekturperspektiv stödjer en diskussion om energi, byggnadsfysik och arkitektur? Inte minst idag när samhället står inför den stora utmaningen att hantera och minimera växthuseffekten, vilket byggregler adresserar och inskärper i kraftfulla krav, är designkunskap om byggnadsfysik viktig för arkitekter. Jag argumenterar för att det behövs en diskussion om arkitekturteknik som sammanför kunskaper om arkitektur och teknik och som motverkar den förenklade uppdelning som finns i dagens byggregler (PBL 8 kap. 1§ och 4§) och påverkar dagens praktiska utövning. En produktiv jämförelse menar jag finns i den situation som arkitekturpraktiken och arkitekturforskningens befann sig i vid mitten av 1800-talet då nya material krävde nya förhållningssätt till arkitekturteknik och arkitekturuttryck. Under 1800-talet utvecklades en diskurs om tektonik för att diskutera relationen mellan material, konstruktion och arkitekturuttryck (Schwarzer 1993; Wolf 1996; Wallenstein 2004, 17-33; Mallgrave 2009). Ett svar på nyss nämnda fråga som jag ger i den avslutande diskussionen är att utveckla en arkitekturdiskussion inom arkitekturpraktik och arkitekturforskning om begreppet tektonik kring byggnadsfysik och uttryck i likhet med den riktning som idag är dominerande inom tektonik kring konstruktion och uttryck. Sammanfattningsvis visar avhandlingens två delar och avslutande diskussion på ett behov av en arkitekturdiskussion om tektonik och en ökad forskningsinsats i relation till byggnadsfysik och de förklaringsmodeller och indikatorer som används i funktionskrav i byggregler. Detta för att synliggöra den relation mellan arkitektur och byggnadsfysik och andra naturvetenskapliga aspekter (exempelvis byggnadsinstallationer och ventilation som ligger utanför denna avhandling) som idag verkar vara bortglömd, såväl i formuleringarna och utvärderingarna av byggregler som hos arkitektpraktik och forskning. Jag hävdar att det är nödvändigt att utifrån arkitekturprofessionens egna verktyg, såsom fallstudier av det partikulära, skapa en relation mellan teori och arkitekturutformningsmöjligheter, det vill säga skapa en kunskapsutveckling kring byggnadsfysik för att ta vara på den innovationsfrihet som funktionskravsregelverk utlovar. Arkitekter behöver även engagera sig i hur byggregler formuleras och i relation till Boverket så att formaspekter inte styrs oavsiktligt och i konflikt med plan- och bygglagens intentioner om volym, form, färg och materialverkan (PBL 2 kap. 6§ och 8 kap. 1§2).
QC 20190913
Частини книг з теми "Daylight metric"
Parry, C. M. "Quality — The Crucial Metric in Daylight Design." In 1989 2nd European Conference on Architecture, 9–11. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-017-0556-1_3.
Повний текст джерелаPereverdieva, Ksenia, Michael Emmerich, André Deutz, Tessa Ezendam, Thomas Bäck, and Hèrm Hofmeyer. "The Prism-Net Search Space Representation for Multi-objective Building Spatial Design." In Lecture Notes in Computer Science, 476–89. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-27250-9_34.
Повний текст джерелаRockcastle, Siobhan, and Marilyne Andersen. "Defining New Metrics for Contrast and Variability." In Annual Dynamics of Daylight Variability and Contrast, 37–51. London: Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5233-0_4.
Повний текст джерелаRockcastle, Siobhan, and Marilyne Andersen. "Application of New Metrics to Abstract Spatial Models." In Annual Dynamics of Daylight Variability and Contrast, 53–68. London: Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5233-0_5.
Повний текст джерелаRockcastle, Siobhan, and Marilyne Andersen. "Application of New Metrics to Detailed Case Studies." In Annual Dynamics of Daylight Variability and Contrast, 69–80. London: Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5233-0_6.
Повний текст джерелаSood, Neetu, Indu Saini, Tarannum Awasthi, Milin Kaur Saini, Parul Bhoriwal, and Tanveer Kaur. "Fog Removal Algorithms for Real-Time Video Footage in Smart Cities for Safe Driving." In Practice, Progress, and Proficiency in Sustainability, 55–86. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-8085-0.ch003.
Повний текст джерелаТези доповідей конференцій з теми "Daylight metric"
Ershov, Sergey Valentinovich, Vadim Gennadjevich Sokolov, Alexey Gennadievich Voloboy, and Vladimir Alexandrovich Galaktionov. "Effective Simulation of Spatial Daylight Autonomy and Annual Sunlight Exposure." In 32nd International Conference on Computer Graphics and Vision. Keldysh Institute of Applied Mathematics, 2022. http://dx.doi.org/10.20948/graphicon-2022-64-72.
Повний текст джерелаAzzahra, Iva Rofiatun Nisa, Fransisca Viviyanti, and Rizki A. Mangkuto. "Prediction of climate-based daylight metrics by simulating monthly median illuminance." In ADVANCED INDUSTRIAL TECHNOLOGY IN ENGINEERING PHYSICS. Author(s), 2019. http://dx.doi.org/10.1063/1.5095333.
Повний текст джерелаQuek, Geraldine, Jan Wienold, and Marilyne Andersen. "USER EVALUATIONS OF CONTRAST-DOMINANT DISCOMFORT GLARE IN DIM DAYLIT SCENARIOS: PRELIMINARY FINDINGS." In CIE 2021 Conference. International Commission on Illumination, CIE, 2021. http://dx.doi.org/10.25039/x48.2021.op22.
Повний текст джерелаManav, B., and E. Kaymaz. "ANALYSES ON OCCUPANT PATTERNS AND ENERGY CONSUMPTION IN RESIDENTIAL BUILDINGS INCLUDING THE COVID-19 PANDEMIC." In CIE 2021 Conference. International Commission on Illumination, CIE, 2021. http://dx.doi.org/10.25039/x48.2021.op34.
Повний текст джерелаMentens, A., G. H. Scheir, Y. Ghysel, F. Descamps, J. Lataire, and V. A. Jacobs. "OPTIMIZING CAMERA PLACEMENT FOR A LUMINANCE-BASED SHADING CONTROL SYSTEM." In CIE 2021 Conference. International Commission on Illumination, CIE, 2021. http://dx.doi.org/10.25039/x48.2021.po39.
Повний текст джерелаAlstan Jakubiec, J., Christoph F. Reinhart, and Kevin Van Den Wymelenberg. "Towards An Integrated Framework for Predicting Visual Comfort Conditions from Luminance-Based Metrics in Perimeter Daylit Spaces." In 2015 Building Simulation Conference. IBPSA, 2015. http://dx.doi.org/10.26868/25222708.2015.2106.
Повний текст джерелаViula, Raquel, and Truus Hordijk. "TESTING THE PREDICTIVE POWER OF VISUAL DISCOMFORT FROM GLARE METRICS IN THE NEAR-WINDOW AND NEAR-WALL ZONES OF THE DAYLIT CLASSROOM ENVIRONMENT." In Proceedings of the 29th Quadrennial Session of the CIE. International Commission on Illumination, CIE, 2019. http://dx.doi.org/10.25039/x46.2019.op40.
Повний текст джерела