Статті в журналах з теми "Cu2SnS3 Films"

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Cu2SnS3 Films.

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Cu2SnS3 Films".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Reddy, Tippasani Srinivasa, and M. C. Santhosh Kumar. "Influence of Substrate Temperature on Structural and Optical Properties of Co-Evaporated Cu<sub>2</sub>SnS<sub>3</sub>/ITO Thin Films." Materials Science Forum 1048 (January 4, 2022): 189–97. http://dx.doi.org/10.4028/www.scientific.net/msf.1048.189.

Повний текст джерела
Анотація:
In this study report the structural and optical properties of Copper Tin Sulfide (Cu2SnS3) thin films on indium tin oxide (ITO) substrate using co-evaporation technique. High purity of copper, tin and sulfur were taken as source materials to deposit Cu2SnS3 (CTS) thin films at different substrate temperatures (200-350 °C). Further, the effect of different substrate temperature on the crystallographic, morphological and optical properties of CTS thin films was investigated. The deposited CTS thin films shows tetragonal phase with preferential orientation along (112) plane confirmed by X-ray diffraction. Micro-Raman studies reveled the formation of CTS thin films. The surface morphology, average grain size and rms values of the deposited films are examined by Scanning electron spectroscopy (SEM) and Atomic Force Microscopy (AFM). The Energy dispersive spectroscopy (EDS) shows the presence of copper, tin and sulfur with a nearly stoichiometric ratio. The optical band gap (1.76-1.63 eV) and absorption coefficient (~105 cm-1) of the films was calculated by using UV-Vis-NIR spectroscopy. The values of refractive index, extinction coefficient and permittivity of the deposited films were calculated from the optical transmittance data.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Dias, Sandra, and S. B. Krupanidhi. "Temperature dependent electrical behaviour of Cu2SnS3 films." AIP Advances 4, no. 3 (March 2014): 037121. http://dx.doi.org/10.1063/1.4869639.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Kuku, Titilayo A., and Olaosebikan A. Fakolujo. "Photovoltaic characteristics of thin films of Cu2SnS3." Solar Energy Materials 16, no. 1-3 (August 1987): 199–204. http://dx.doi.org/10.1016/0165-1633(87)90019-0.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Berg, Dominik M., Rabie Djemour, Levent Gütay, Susanne Siebentritt, Phillip J. Dale, Xavier Fontane, Victor Izquierdo-Roca, and Alejandro Pérez-Rodriguez. "Raman analysis of monoclinic Cu2SnS3 thin films." Applied Physics Letters 100, no. 19 (May 7, 2012): 192103. http://dx.doi.org/10.1063/1.4712623.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Ghediya, Prashant R., Tapas K. Chaudhuri, Vidur Raj, Dhaval Vankhade, Hark Hoe Tan, and Chennupati Jagadish. "Electrical Properties of Compact Drop-Casted Cu2SnS3 Films." Journal of Electronic Materials 49, no. 11 (August 14, 2020): 6403–9. http://dx.doi.org/10.1007/s11664-020-08380-8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Bayazıt, Tuğba, Mehmet Ali Olgar, Tayfur Küçükömeroğlu, Emin Bacaksız, and Murat Tomakin. "Growth and characterization of Cu2SnS3 (CTS), Cu2SnSe3 (CTSe), and Cu2Sn(S,Se)3 (CTSSe) thin films using dip-coated Cu–Sn precursor." Journal of Materials Science: Materials in Electronics 30, no. 13 (June 3, 2019): 12612–18. http://dx.doi.org/10.1007/s10854-019-01622-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Bouaziz, M., M. Amlouk, and S. Belgacem. "Structural and optical properties of Cu2SnS3 sprayed thin films." Thin Solid Films 517, no. 7 (February 2009): 2527–30. http://dx.doi.org/10.1016/j.tsf.2008.11.039.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Naji, Iqbal S. "Impact of thickness and heat treatment on some physical properties of thin Cu2SnS3 films." Iraqi Journal of Physics (IJP) 14, no. 30 (February 3, 2019): 120–28. http://dx.doi.org/10.30723/ijp.v14i30.207.

Повний текст джерела
Анотація:
Copper tin sulfide (Cu2SnS3) thin films have been grown on glasssubstrate with different thicknesses (500, 750 and 1000) nm by flashthermal evaporation method after prepare its alloy from theirelements with high purity. The as-deposited films were annealed at473 K for 1h. Compositional analysis was done using Energydispersive spectroscopy (EDS). The microstructure of CTS powderexamined by SEM and found that the large crystal grains are shownclearly in images. XRD investigation revealed that the alloy waspolycrystalline nature and has cubic structure with preferredorientation along (111) plane, while as deposited films of differentthickness have amorphous structure and converted to polycrystallinewith annealing temperature for high thickness. AFM measurementsshowed that the grain size of the films was increasing by annealing.The ultraviolet- visible absorption spectrum measurement indicatedthat the films have a direct energy band gap. Eg decrease withthickness and increase with annealing.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Tiwari, Devendra, Tristan Koehler, Reiner Klenk, and David J. Fermin. "Solution processed single-phase Cu2SnS3 films: structure and photovoltaic performance." Sustainable Energy & Fuels 1, no. 4 (2017): 899–906. http://dx.doi.org/10.1039/c7se00150a.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Zaretskaya, E. P., V. F. Gremenok, V. A. Ivanov, A. V. Stanchik, O. M. Borodavchenko, D. V. Zhyhulin, S. Özçelik, and N. Akçay. "Phase Composition, Microstructure, and Optical Properties of Cu2SnS3 Thin Films." Journal of Applied Spectroscopy 87, no. 3 (July 2020): 488–94. http://dx.doi.org/10.1007/s10812-020-01028-9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
11

Puzer, D. B., I. Nkrumah, F. K. Ampong, M. Paal, E. A. Botchway, R. K. Nkum, and F. Boakye. "Copper-tin-sulphide (CTS) thin films, obtained by a two-electrode electrochemical deposition of metal precursors, followed by soft annealing and sulfurization." Chalcogenide Letters 18, no. 8 (August 2021): 481–91. http://dx.doi.org/10.15251/cl.2021.188.481.

Повний текст джерела
Анотація:
CTS thin films have been prepared by soft annealing and sulfurization of electrodeposited Cu-Sn precursors. The stacked elemental layer approach was used to deposit the elemental precursors on an ITO substrate using a two-electrode electrochemical cell, with graphite plate as the counter electrode. The stacked metallic layer was then soft annealed in an Argon atmosphere at 350 °C and subsequently, sulfurized at different temperatures of 500 0C and 550 0C for one hour to form CTS films. The films have been characterized by a variety of techniques. From the XRD analysis, the CTS thin films obtained at a sulfurization temperature of 500 oC showed the coexistence of SnS, Cubic-Cu2Sn3S7 and hexagonal-Cu4S16Sn7 phases. The majority phase was clearly identified as cubic-Cu2SnS3, with (111) preferential orientation. For the films sulfurized at 550 oC, the pattern of prominent peaks showed the presence of the Hexagonal-Cu4S16Sn7 phase of CTS with preferred orientation along the (202) plane. There were relatively fewer low intensity peaks assigned to the secondary phases, indicating an improvement in CTS purity at the higher sulfurization temperature. SEM images of the CTS films show a compact, homogenous morphology, with densely packed grains. The films sulfurized at 550 oC, showed better homogeneity. EDAX spectra of the sulfurized alloy precursors were consistent with the formation of CTS. The film obtained at the lower sulfurization temperature had two band gaps as a consequence of the mixture of phases present in the sample. The film obtained at the higher sulfurization temperature had an energy band gap of 1.5 eV, which falls within the range of values reported in literature. The present work provides a new synthesis route for the electrodeposition of CTS thin film for device applications.
Стилі APA, Harvard, Vancouver, ISO та ін.
12

Rahaman, Sabina, M. Anantha Sunil, Monoj Kumar Singha, and Kaustab Ghosh. "Studies of ultrasonically sprayed Cu2SnS3 thin films by varying Sn concentration." Materials Today: Proceedings 43 (2021): 3938–41. http://dx.doi.org/10.1016/j.matpr.2021.02.657.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
13

Dias, Sandra, and S. B. Krupanidhi. "Solution processed Cu2SnS3 thin films for visible and infrared photodetector applications." AIP Advances 6, no. 2 (February 2016): 025217. http://dx.doi.org/10.1063/1.4942775.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
14

Ghediya, Prashant R., Tapas K. Chaudhuri, Vidur Raj, Dipankar Chugh, Kaushal Vora, Li Li, Hark Hoe Tan, and Chennupati Jagadish. "Direct-coated Cu2SnS3 films from molecular solution inks for solar photovoltaics." Materials Science in Semiconductor Processing 88 (December 2018): 120–26. http://dx.doi.org/10.1016/j.mssp.2018.07.041.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
15

Bouaziz, M., J. Ouerfelli, S. K. Srivastava, J. C. Bernède, and M. Amlouk. "Growth of Cu2SnS3 thin films by solid reaction under sulphur atmosphere." Vacuum 85, no. 8 (February 2011): 783–86. http://dx.doi.org/10.1016/j.vacuum.2010.10.001.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
16

Xu, Bin, Yun Zhao, Aimin Sun, Yan Li, Wen Li, and Xiuxun Han. "Direct solution coating of pure-phase Cu2SnS3 thin films without sulfurization." Journal of Materials Science: Materials in Electronics 28, no. 4 (November 8, 2016): 3481–86. http://dx.doi.org/10.1007/s10854-016-5946-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
17

Patel, Biren, Indrajit Mukhopadhyay, and Abhijit Ray. "Inexpensive Cu2SnS3 grown by room-temperature aqueous bath electrodeposition for thin film solar cells." International Journal of Modern Physics B 32, no. 19 (July 18, 2018): 1840071. http://dx.doi.org/10.1142/s0217979218400714.

Повний текст джерела
Анотація:
We report the growth of Cu2SnS3 (CTS) thin films on F-doped SnO2 (FTO) glass substrates at room-temperature by low-cost electrodeposition technique using an aqueous medium without the evolution of hydrogen. Electrolyte concentration and deposition potential were optimized under the limits of water hydrolysis. As-deposited films are post-annealed in the presence of the sulphur flakes to establish the stoichiometry. The annealed films were found to contain high phase purity and favorable optical properties to be useful for the photovoltaic applications. Optical data reveal that the CTS films have direct optical bandgap of 1.25 eV with an absorption coefficient of the order of 104 cm[Formula: see text]. A photovoltaic cell architecture of Glass/FTO (back contact)/CTS/CdS/Al:ZnO/Al (front contact) exhibited an open circuit voltage of 28 mV, a short circuit current density of 8.4 [Formula: see text]A/cm2 and the fill factor of 25%. The absorber thickness optimization and the use of Mo-coated glass as a back contact improve the solar cell parameters. A further study in this aspect is under way.
Стилі APA, Harvard, Vancouver, ISO та ін.
18

Guo, Yuxiao, Xingtian Yin, Yawei Yang, and Wenxiu Que. "Construction of ZnO/Cu2SnS3 nanorod array films for enhanced photoelectrochemical and photocatalytic activity." RSC Advances 6, no. 106 (2016): 104041–48. http://dx.doi.org/10.1039/c6ra22674d.

Повний текст джерела
Анотація:
ZnO nanorod array films grown on fluorine-doped tin oxide glass substrates were homogeneously coated with visible light responsive Cu2SnS3 nanoparticles through a controllable one-step electrodeposition process.
Стилі APA, Harvard, Vancouver, ISO та ін.
19

Chalapathi, U., B. Poornaprakash, and Si-Hyun Park. "Antimony induced crystal growth for large-grained Cu2SnS3 thin films for photovoltaics." Journal of Power Sources 426 (June 2019): 84–92. http://dx.doi.org/10.1016/j.jpowsour.2019.04.013.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
20

Hadi, Zaid L., Mohammed Sh Essa, and Bahaa T. Chiad. "Ternary Cu2SnS3 Thin Films Deposited by Fully Controlled System of Spray Pyrolysis." Journal of Physics: Conference Series 1234 (July 2019): 012041. http://dx.doi.org/10.1088/1742-6596/1234/1/012041.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
21

Tiwari, Devendra, Tapas K. Chaudhuri, T. Shripathi, U. Deshpande, and V. G. Sathe. "Structural and optical properties of layer-by-layer solution deposited Cu2SnS3 films." Journal of Materials Science: Materials in Electronics 25, no. 9 (June 11, 2014): 3687–94. http://dx.doi.org/10.1007/s10854-014-2076-y.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
22

Minnam Reddy, Vasudeva Reddy, Mohan Reddy Pallavolu, Phaneendra Reddy Guddeti, Sreedevi Gedi, Kishore Kumar Yarragudi Bathal Reddy, Babu Pejjai, Woo Kyoung Kim, Thulasi Ramakrishna Reddy Kotte, and Chinho Park. "Review on Cu2SnS3, Cu3SnS4, and Cu4SnS4 thin films and their photovoltaic performance." Journal of Industrial and Engineering Chemistry 76 (August 2019): 39–74. http://dx.doi.org/10.1016/j.jiec.2019.03.035.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
23

Olgar, M. A., B. M. Başol, M. Tomakin, and E. Bacaksız. "Phase transformation in Cu2SnS3 (CTS) thin films through pre-treatment in sulfur atmosphere." Journal of Materials Science: Materials in Electronics 32, no. 8 (March 15, 2021): 10018–27. http://dx.doi.org/10.1007/s10854-021-05660-9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
24

Raadik, T., M. Grossberg, J. Krustok, M. Kauk-Kuusik, A. Crovetto, R. Bolt Ettlinger, O. Hansen, and J. Schou. "Temperature dependent photoreflectance study of Cu2SnS3 thin films produced by pulsed laser deposition." Applied Physics Letters 110, no. 26 (June 26, 2017): 261105. http://dx.doi.org/10.1063/1.4990657.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
25

Chalapathi, U., B. Poornaprakash, and Si-Hyun Park. "Growth and properties of co-evaporated Cu2SnS3 thin films for solar cell applications." Vacuum 131 (September 2016): 22–27. http://dx.doi.org/10.1016/j.vacuum.2016.05.028.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
26

Srinivasa Reddy, T., R. Amiruddin, and M. C. Santhosh Kumar. "Deposition and characterization of Cu2SnS3 thin films by co-evaporation for photovoltaic application." Solar Energy Materials and Solar Cells 143 (December 2015): 128–34. http://dx.doi.org/10.1016/j.solmat.2015.06.049.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
27

Ashebir, Getinet Y., Chao Dong, Junwei Chen, Wangwei Chen, Rong Liu, Qiuyuan Zhao, Zhiyang Wan, and Mingtai Wang. "Solution-processed extremely thin films of Cu2SnS3 nanoparticles for planar heterojunction solar cells." Journal of Physics D: Applied Physics 53, no. 11 (January 2, 2020): 115101. http://dx.doi.org/10.1088/1361-6463/ab5ee5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
28

Magdy, Wafaa, Ayaka Kanai, F. A. Mahmoud, E. T. El Shenawy, S. A. Khairy, H. H. Hassan, and Mutsumi Sugiyama. "Effect of rapid thermal annealing on sprayed Cu2SnS3 thin films for solar-cell application." Japanese Journal of Applied Physics 59, no. 10 (September 25, 2020): 105503. http://dx.doi.org/10.35848/1347-4065/abb7f1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
29

Kanai, Ayaka, and Mutsumi Sugiyama. "Emission properties of intrinsic and extrinsic defects in Cu2SnS3 thin films and solar cells." Japanese Journal of Applied Physics 60, no. 1 (December 18, 2020): 015504. http://dx.doi.org/10.35848/1347-4065/abcf06.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
30

Orletskii, I. G., M. N. Solovan, F. Pinna, G. Cicero, P. D. Mar’yanchuk, E. V. Maistruk, and E. Tresso. "Structural, optical, and electrical properties of Cu2SnS3 thin films produced by sol gel method." Physics of the Solid State 59, no. 4 (April 2017): 801–7. http://dx.doi.org/10.1134/s1063783417040163.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
31

Tanaka, Kunihiko, Mao Kowata, Fumitaka Yoshihisa, Shinya Imai, and Wataru Yamazaki. "Preparation of monoclinic Cu2SnS3 thin films by fine channel mist chemical vapor deposition method." Thin Solid Films 697 (March 2020): 137820. http://dx.doi.org/10.1016/j.tsf.2020.137820.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
32

Guddeti, Phaneendra Reddy, Sreedevi Gedi, and K. T. Ramakrishna Reddy. "Sulfurization temperature dependent physical properties of Cu2SnS3 films grown by a two-stage process." Materials Science in Semiconductor Processing 86 (November 2018): 164–72. http://dx.doi.org/10.1016/j.mssp.2018.06.021.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
33

Shelke, Harshad D., Abhishek C. Lokhande, Vanita S. Raut, Amar M. Patil, Jin H. Kim, and Chandrakant D. Lokhande. "Facile synthesis of Cu2SnS3 thin films grown by SILAR method: effect of film thickness." Journal of Materials Science: Materials in Electronics 28, no. 11 (March 19, 2017): 7912–21. http://dx.doi.org/10.1007/s10854-017-6492-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
34

Wang, Yaguang, Jianmin Li, Cong Xue, Yan Zhang, Guoshun Jiang, Weifeng Liu, and Changfei Zhu. "Fabrication of Cu2SnS3 thin films by ethanol-ammonium solution process by doctor-blade technique." Electronic Materials Letters 13, no. 6 (June 24, 2017): 478–82. http://dx.doi.org/10.1007/s13391-017-6244-0.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
35

Zhang, Haitao, Meng Xie, Shu Zhang, and Yong Xiang. "Fabrication of highly crystallized Cu2SnS3 thin films through sulfurization of Sn-rich metallic precursors." Journal of Alloys and Compounds 602 (July 2014): 199–203. http://dx.doi.org/10.1016/j.jallcom.2014.03.014.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
36

XU Xin, 徐. 信., 王书荣 WANG Shu-rong, 陆熠磊 LU Yi-lei, 杨. 帅. YANG Shuai, 李耀斌 LI Yao-bin, 唐. 臻. TANG Zhen, and 杨洪斌 YANG Hong-bin. "Fabrication of Cu2SnS3 Thin Films Solar Cells by Magnetron Sputtering Sn and CuS Targets." Chinese Journal of Luminescence 39, no. 11 (2018): 1557–64. http://dx.doi.org/10.3788/fgxb20183911.1557.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
37

Shelke, H. D., A. C. Lokhande, J. H. Kim, and C. D. Lokhande. "Photoelectrochemical (PEC) studies on Cu2SnS3 (CTS) thin films deposited by chemical bath deposition method." Journal of Colloid and Interface Science 506 (November 2017): 144–53. http://dx.doi.org/10.1016/j.jcis.2017.07.032.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
38

Ruan, Chengzhi, Jiahua Tao, Chengyun Zhu, and Chen Chen. "Effect of potassium doping for ultrasonic sprayed Cu2SnS3 thin films for solar cell application." Journal of Materials Science: Materials in Electronics 29, no. 15 (June 6, 2018): 12824–29. http://dx.doi.org/10.1007/s10854-018-9401-9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
39

Kahraman, Süleyman, Mateja Podlogar, Slavko Bernik, and Hüsnü Salih Güder. "Facile Synthesis of Cu2ZnSnS4 Photovoltaic Absorber Thin Films via Sulfurization of Cu2SnS3/ZnS Layers." Metallurgical and Materials Transactions A 45, no. 4 (January 14, 2014): 2326–34. http://dx.doi.org/10.1007/s11661-013-2164-2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
40

Igarashi, Yuki, Takuya Tomono, Kunihiko Tanaka, and Katsuhiko Moriya. "Preparation of Cu2SnS3 thin film by sol-gel dip coating." Japanese Journal of Applied Physics 61, SB (January 17, 2022): SB1002. http://dx.doi.org/10.35848/1347-4065/ac2e7b.

Повний текст джерела
Анотація:
Abstract Cu2SnS3 (CTS), an environmentally friendly semiconductor material that has little impact on the human body, was developed as an alternative material to silicon-based solar cells, which are currently the mainstream product in the solar cell market. In this study, by adopting the sol-gel dip coating method, a CTS thin film was produced at low cost without using a vacuum process for use as a solar cell light absorption layer. CTS thin films were prepared while varying the annealing temperature and the amount of α-cyclodextrin added, and the results were compared by different evaluation methods. In addition, the samples to which α-cyclodextrin was added showed peaks due to CTS at (112) and (220) in all the samples. The crystallinity was not found to depend on the amount of α-cyclodextrin added.
Стилі APA, Harvard, Vancouver, ISO та ін.
41

Nguyen, Hong T. T., V. S. Zakhvalinskii, Thao T. Pham, N. T. Dang, Tuan V. Vu, E. A. Pilyuk, and G. V. Rodriguez. "Structural properties and variable-range hopping conductivity of Cu2SnS3." Materials Research Express 6, no. 5 (February 27, 2019): 055915. http://dx.doi.org/10.1088/2053-1591/ab0775.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
42

Sozak, Işil Merve Songür, Uğur Yorulmaz, Ferhunde Atay, and Idris Akyüz. "The effect of sulphur amount in sulphurization stage on secondary phases in Cu2SnS3(CTS) films." Current Applied Physics 26 (June 2021): 64–71. http://dx.doi.org/10.1016/j.cap.2021.03.009.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
43

Kim, Yongshin, In-Hwan Choi, and Soon Yong Park. "Characterization of Cu2SnS3 thin films prepared by sulfurization of co-evaporated Cu–SnS precursor layers." Thin Solid Films 666 (November 2018): 61–65. http://dx.doi.org/10.1016/j.tsf.2018.09.035.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
44

Jayasree, Y., U. Chalapathi, and V. Sundara Raja. "Growth of Cu2SnS3 thin films by a two-stage process: structural, microstructural and optical properties." Journal of Materials Science: Materials in Electronics 26, no. 8 (May 19, 2015): 5946–51. http://dx.doi.org/10.1007/s10854-015-3166-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
45

Mohamed, A. M. A., Rasha Afify, Walaa A. E. Omar, Paul C. Okonkwo, and M. Boshta. "Influence of deposition temperature and time on the optical behavior of sprayed Cu2SnS3 thin films." Emergent Materials 3, no. 1 (February 2020): 15–24. http://dx.doi.org/10.1007/s42247-020-00075-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
46

Wang, Weihuang, Huiling Cai, Guilin Chen, Binwen Chen, Liquan Yao, Jiabin Dong, Xuxi Yu, Shuiyuan Chen, and Zhigao Huang. "Preparation of Sn loss-free Cu2SnS3 thin films by an oxide route for solar cell." Journal of Alloys and Compounds 742 (April 2018): 860–67. http://dx.doi.org/10.1016/j.jallcom.2018.01.391.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
47

Heidariramsheh, Maryam, Sevan Gharabeiki, Seyed Mohammad Mahdavi, and Nima Taghavinia. "Optoelectrical and structural characterization of Cu2SnS3 thin films grown via spray pyrolysis using stable molecular ink." Solar Energy 224 (August 2021): 218–29. http://dx.doi.org/10.1016/j.solener.2021.05.088.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
48

Jia, Zhen, Qinmiao Chen, Jin Chen, Tingting Wang, Zhenqing Li, and Xiaoming Dou. "The photovoltaic properties of novel narrow band gap Cu2SnS3 films prepared by a spray pyrolysis method." RSC Advances 5, no. 37 (2015): 28885–91. http://dx.doi.org/10.1039/c5ra01610j.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
49

Patel, Biren, Ranjan K. Pati, Indrajit Mukhopadhyay, and Abhijit Ray. "Effect of vacuum and sulphur annealing on the structural properties of spray deposited Cu2SnS3 thin films." Vacuum 158 (December 2018): 263–70. http://dx.doi.org/10.1016/j.vacuum.2018.10.015.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
50

Chalapathi, U., Y. Jayasree, S. Uthanna, and V. Sundara Raja. "Effect of annealing on the structural, microstructural and optical properties of co-evaporated Cu2SnS3 thin films." Vacuum 117 (July 2015): 121–26. http://dx.doi.org/10.1016/j.vacuum.2015.04.006.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії