Добірка наукової літератури з теми "Cross-coupled compensator"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Cross-coupled compensator".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Cross-coupled compensator"
Liu, Ya Qiu, Qu Wu, Wei Peng Jing, and Liang Kuan Zhu. "Cross-Coupled Synchronized Control for Bi-Cylinder Servo System." Applied Mechanics and Materials 44-47 (December 2010): 1646–50. http://dx.doi.org/10.4028/www.scientific.net/amm.44-47.1646.
Повний текст джерелаEl-Khatib, Z., L. MacEachern, and S. A. Mahmoud. "Highly-linear CMOS cross-coupled compensator transconductor with enhanced tunability." Electronics Letters 46, no. 24 (2010): 1597. http://dx.doi.org/10.1049/el.2010.2332.
Повний текст джерелаSchindlbeck, Christopher, Christian Pape, and Eduard Reithmeier. "Multi-DOF compensation of piezoelectric actuators with recursive databases." at - Automatisierungstechnik 66, no. 8 (August 28, 2018): 656–64. http://dx.doi.org/10.1515/auto-2017-0136.
Повний текст джерелаSu, Ke-Han, and Ming-Yang Cheng. "Contouring accuracy improvement using cross-coupled control and position error compensator." International Journal of Machine Tools and Manufacture 48, no. 12-13 (October 2008): 1444–53. http://dx.doi.org/10.1016/j.ijmachtools.2008.04.008.
Повний текст джерелаSu, Ke Han, Ming Yang Cheng, and Yu Chen Chang. "Contouring Performance Improvement of Biaxial Motion Control Systems Using Friction and Disturbance Compensation." Advanced Materials Research 579 (October 2012): 287–96. http://dx.doi.org/10.4028/www.scientific.net/amr.579.287.
Повний текст джерелаBenderskiy, B. Ya, and A. A. Chernova. "The influence of the charge shape on heat exchange of a recessed nozzle." Journal of Physics: Conference Series 2057, no. 1 (October 1, 2021): 012013. http://dx.doi.org/10.1088/1742-6596/2057/1/012013.
Повний текст джерелаZhang, Xiuyun, Zhiqiang Wang, and Tao Liu. "Anti-Disturbance Integrated Position Synchronous Control of a Dual Permanent Magnet Synchronous Motor System." Energies 15, no. 18 (September 13, 2022): 6697. http://dx.doi.org/10.3390/en15186697.
Повний текст джерелаAhmad, Irfan, Amro Emad Awad Ali та Yasser Bin Salamah. "MIMO Hμ Feedback Controller With Feedforward Compensator for Scanning Tunneling Microscope Having 3D Cross-Coupled Piezoelectric Actuator". IEEE Access 9 (2021): 153750–66. http://dx.doi.org/10.1109/access.2021.3127575.
Повний текст джерелаKulkarni, P. K., and K. Srinivasan. "Optimal Contouring Control of Multi-Axial Feed Drive Servomechanisms." Journal of Engineering for Industry 111, no. 2 (May 1, 1989): 140–48. http://dx.doi.org/10.1115/1.3188743.
Повний текст джерелаSmith, R. D., W. F. Weldon, and A. E. Traver. "Aerodynamic Loading and Magnetic Bearing Controller Robustness Using a Gain-Scheduled Kalman Filter." Journal of Engineering for Gas Turbines and Power 118, no. 4 (October 1, 1996): 836–42. http://dx.doi.org/10.1115/1.2817003.
Повний текст джерелаДисертації з теми "Cross-coupled compensator"
Lai, Xing-Yong, and 賴興勇. "Contour Error Compensation of Two-Axis Motion Control Systems by Using Cross-Coupled and Adaptive Control." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/50612566545033483437.
Повний текст джерела中華大學
電機工程學系碩士班
91
The contour error is one of the most important specifications of a machine that has synchronous motion of multiple axes. To improve the tracking error of each axis is a sufficient way to reduce the contour error. The small tracking error, however, is usually done by high gain that is not practically. For reducing contour error of synchronous motion, the match of the dynamic characteristics, including nonlinear properties such as friction and backlash, of all axes is the essential issue. In this study, the plant to be controlled is a X-Y table, powered by servomotors, and the MRAC is used firstly to match the linear portion of dynamic characteristics of two axes. Moreover, the cross-coupled control scheme is utilized for further improvement of contour error. The computer simulations and experiments are presented to verify the usefulness of the algorithm. The results of experiments show that the contour error is reduced.
Chih, Chiang-Feng, and 江峰誌. "Contour error compensation of two-axis motion control system by using cross-coupled with PID control." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/47766237833031068499.
Повний текст джерелаChen, Wei-Chang, and 陳蔚強. "Optimization of Parameters for CNC Machine Tracking Control with Cross-coupled Pre-compensation Method Using Genetic Algorithm." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/26740168952660518801.
Повний текст джерела國立交通大學
工學院碩士在職專班精密與自動化工程學程
93
ABSTRACT Genetic algorithm is used as a tool to find the optimal gains for contour control of biaxial CNC machine tools in this work. In the past, this was usually done by trial and error, which became difficult and inefficient when the system became large and complicated. The addressed contour control schemes for CNC machine tools include conventional tracking system (Uncoupled system, US) , Cross-coupled biaxial control (CCS), and Cross-coupled pre-compensation control (CCPM ). The successful implementation of genetic algorithm in sequential determination of system gains for the addressed control schemes showed that the genetic algorithm is applicable to the dynamic system in a manner of system gains configuration.
Частини книг з теми "Cross-coupled compensator"
El-Khatib, Ziad, Leonard MacEachern, and Samy A. Mahmoud. "Linearized CMOS Distributed Bidirectional Amplifier with Cross-Coupled Compensator." In Distributed CMOS Bidirectional Amplifiers, 71–94. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-0272-5_5.
Повний текст джерела"Contouring-Error Reduction by Combination of Tracking-Error Compensation and Cross- Coupled Control." In ESSE 2017, 565–74. De Gruyter, 2017. http://dx.doi.org/10.1515/9783110540048-057.
Повний текст джерелаТези доповідей конференцій з теми "Cross-coupled compensator"
Kim, Daehyeon, Youngjin Kim, Jimin Park, Hyeongrae Kim, Juyeon Kim, and Dongho Oh. "Individual Drive Cross-Coupled Control System to Compensate for Measurement Error for Roll-to-Roll Contact Pressure Uniformization." In ASME 2021 30th Conference on Information Storage and Processing Systems. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/isps2021-64689.
Повний текст джерелаBarton, Kira, David Hoelzle, Andrew Alleyne, and Amy Wagoner Johnson. "Cross Coupled Iterative Learning Control of Dissimilar Dynamical Systems." In ASME 2009 Dynamic Systems and Control Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/dscc2009-2727.
Повний текст джерелаHorvath, Roland, George T. Flowers, and Jerry Fausz. "Passive Balancing for Rotor Systems Using Pendulum Balancers." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84194.
Повний текст джерелаLau, Ming Wai, Cheuk Ho Hung, Ka Nang Leung, and Wang Ling Goh. "Cross-coupled Gm-boosting technique for two-stage miller-compensated amplifier." In 2016 IEEE International Conference on Electron Devices and Solid-State Circuits (EDSSC). IEEE, 2016. http://dx.doi.org/10.1109/edssc.2016.7785293.
Повний текст джерелаWang Limei and Li Mo. "Cross-coupled control of direct drive XY table based on position compensation." In 2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering (CMCE 2010). IEEE, 2010. http://dx.doi.org/10.1109/cmce.2010.5610136.
Повний текст джерелаGao, Li. "Friction compensation-based cross-coupled synchronous control method for multiple servo motors." In RICAI 2022: 2022 4th International Conference on Robotics, Intelligent Control and Artificial Intelligence. New York, NY, USA: ACM, 2022. http://dx.doi.org/10.1145/3584376.3584450.
Повний текст джерелаMa, Jian-Wei, De-Ning Song, Zhen-Yuan Jia, Ning Zhang, Guo-Qing Hu, and Wei-Wei Su. "Adaptive Pre-Compensation of the Contouring Error for High-Precision Parametric Curved Contour Following." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71284.
Повний текст джерелаJos Prakash, A. V., Babita R. Jose, and Jimson Mathew. "A Novel Excess Sturdy-MASH-Loop-Delay Compensated Cross-Coupled Sigma-Delta Modulator." In 2016 29th International Conference on VLSI Design and 2016 15th International Conference on Embedded Systems (VLSID). IEEE, 2016. http://dx.doi.org/10.1109/vlsid.2016.59.
Повний текст джерелаKuo, Wei-Liang, Wei-Che Tsai, Hao-Lun Huang, and Ming-Yang Cheng. "Improvement of Contour Following Control Using Cross Coupled Control and Adaptive Disturbance Compensation." In International Conference of Control, Dynamic Systems, and Robotics. Avestia Publishing, 2016. http://dx.doi.org/10.11159/cdsr16.114.
Повний текст джерелаXia, Peng, Guanghui Zhang, Jingming Zhao, and Zhansheng Liu. "Investigations on Rotordynamic Characteristics of a Floating Ring Seal Considering Structural Elasticity." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-63891.
Повний текст джерела