Добірка наукової літератури з теми "Cracking intensity"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Cracking intensity".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Cracking intensity"
Yang, Bin, Qin Shou Huang, Xin Wang Qiu, and Hua Xu. "Dynamic Response Analysis of Stress Intensity Factors of Reflective Cracking in Asphalt Overlay Suffer Wheel Load." Advanced Materials Research 217-218 (March 2011): 187–90. http://dx.doi.org/10.4028/www.scientific.net/amr.217-218.187.
Повний текст джерелаFang, Qiang. "A Comparative Study of Delayed Hydride Cracking in Zr-3.5Sn-0.8Nb-0.8Mo and Zr-2.5Nb." Materials Science Forum 917 (March 2018): 207–11. http://dx.doi.org/10.4028/www.scientific.net/msf.917.207.
Повний текст джерелаSun, Jiamin, Jonas Hensel, Thomas Nitschke-Pagel, and Klaus Dilger. "Influence of Restraint Conditions on Welding Residual Stresses in H-Type Cracking Test Specimens." Materials 12, no. 17 (August 23, 2019): 2700. http://dx.doi.org/10.3390/ma12172700.
Повний текст джерелаSekine, Hideki, and Peter W. R. Beaumont. "Stress-Corrosion Cracking in Unidirectional GFRP Composites." Key Engineering Materials 430 (March 2010): 101–13. http://dx.doi.org/10.4028/www.scientific.net/kem.430.101.
Повний текст джерелаLi, Limin, Zhaoyang Guo, Longfei Ran, and Jiewen Zhang. "Study on Low-Temperature Cracking Performance of Asphalt under Heat and Light Together Conditions." Materials 13, no. 7 (March 27, 2020): 1541. http://dx.doi.org/10.3390/ma13071541.
Повний текст джерелаUzan, Jacob. "Evaluation of Fatigue Cracking." Transportation Research Record: Journal of the Transportation Research Board 1570, no. 1 (January 1997): 89–95. http://dx.doi.org/10.3141/1570-11.
Повний текст джерелаMackay, T. L., and B. J. Alperin. "Stress intensity factors for fatigue cracking in high-strength bolts." Engineering Fracture Mechanics 21, no. 2 (January 1985): 391–97. http://dx.doi.org/10.1016/0013-7944(85)90027-x.
Повний текст джерелаYU, G., B. JIANG, L. QIAO, Y. WANG, and W. CHU. "Threshold stress intensity for hydrogen—Induced cracking of tubular steel." Scripta Materialia 36, no. 12 (June 15, 1997): 1467–70. http://dx.doi.org/10.1016/s1359-6462(97)00037-7.
Повний текст джерелаSura, V., and S. Mahadevan. "Modelling shattered rim cracking in railroad wheels." Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 225, no. 6 (June 1, 2011): 593–604. http://dx.doi.org/10.1177/0954409711403671.
Повний текст джерелаMiyajima, Tatsuya, and Mototsugu Sakai. "The fracture toughness for first matrix cracking of a unidirectionally reinforced carbon/carbon composite material." Journal of Materials Research 6, no. 11 (November 1991): 2312–17. http://dx.doi.org/10.1557/jmr.1991.2312.
Повний текст джерелаДисертації з теми "Cracking intensity"
Sun, Xiaodan. "Residual stresses, cracking and stress intensity factors for Vickers indentations in ceramics." Thesis, University of Oxford, 2015. https://ora.ox.ac.uk/objects/uuid:71f1d3ed-8163-4487-a81e-df09d50710ed.
Повний текст джерелаHassan, Tasnim. "NUMERICAL STUDY OF TRANSIENT RESPONSE OF AN INTERFACE-CRACK IN A TWO LAYERED PLATE (ANTI-PLANE, STRESS INTENSITY FACTOR)." Thesis, The University of Arizona, 1985. http://hdl.handle.net/10150/275474.
Повний текст джерелаMiller, Douglas Dwight. "Stress intensity factors for circumferential part-through cracks from holes in hollow cylinders subjected to tension and bending loads." Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/16055.
Повний текст джерелаPierola, Javier. "Three dimensional stress intensity factor for large arrays of radial internal surface cracks in a cylindrical pressure vessel." FIU Digital Commons, 1993. http://digitalcommons.fiu.edu/etd/2514.
Повний текст джерелаRhymer, Donald William. "Stress Intensity Solutions of Thermally Induced Cracks in a Combustor Liner Hot Spot Using Finite Element Analysis." Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/7515.
Повний текст джерелаMariano, Neide Aparecida. "Corrosão sob tensão de um aço inoxidável austenítico em soluções aquosas contendo cloretos." Universidade de São Paulo, 1997. http://www.teses.usp.br/teses/disponiveis/18/18136/tde-03102017-142025/.
Повний текст джерелаThe present work studies the stress corrosion cracking behavior in austenitic Fe-Cr-Mn-N stainless steel, in as received, solubilized and sensitized conditions, when submited to several chlorides environments. To evalued the stress corrosion cracking susceptibility, DCB (\"Double Cantilcver Beam\") and C(T) (\"Compact- Tension\") specimens, fatigue precracked, side grooved and wedge loaded were used. The environments employed were boiling solution of 45 wt% of MgCl2 at 154ºC, synthetic sea water at room and 100°C temperatures, and a solution with 3,5 wt% of NaCI at room temperature. The susceptibility to stress corrosion cracking has been evaluated in terms of the threshold stress intensity factor, KISCC, and the fracture surface appearance of those specimens whose the crack propagation took place was characterized. The results showed that only the specimens in the as received and sensitized conditions, were suceptible to the stress corrosion cracking effect in the solution with 45 wt% of MgCl2 at the boilling temperature. Also, it has been verified the electrochemical behavior of this steel when submited in the above environments. The results of polarization curves showed that the material presents low corrosion strength, mainly in MgCl2 environments.
Lados, Diana Aida. "Fatigue crack growth mechanisms in Al-Si-Mg alloys." Link to electronic thesis, 2004. http://www.wpi.edu/Pubs/ETD/Available/etd-0204104-125758.
Повний текст джерелаKeywords: Microstructure; Elastic-Plastic Fracture Mechanics; Crack closure; A356; J-integral; Conventionally cast and SSM Al-Si-Mg alloys; Residual stress; Heat treatment; Fatigue crack growth mechanisms; Threshold stress intensity factor; Plastic zone; Paris law; Fracture toughness; Roughness. Includes bibliographical references.
Roux-Langlois, Clément. "Simulation de fissures courbes en trois dimensions avec extraction directe des facteurs d'intensité des contraintes : En vue de l'identification de lois de propagation de fatigue." Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0112/document.
Повний текст джерелаIt is necessary to understand the behavior of structures up to their failure to enhance their design. The mechanisms and phenomena undergoing failure vary according to the considered material and boundary conditions. We consider homogeneous materials for which cracks propagate in a context where behavior nonlinearities are not dominants. These conditions are matched for brittle and quasi-brittle materials and for some fatigue cracks. For the former, the main source of dissipation is the crack propagation which can be seen as the generation of a new free-surface. For the later, there is many applications where, in one loading cycle, the nonlinearities remains confined around the crack tip. The linear elastic fracture mechanics theory is then a pertinent model to approximate the structure behavior. Under such hypotheses, a singularity appears in the crack tip vicinity. The Williams' series expansion is computed from the asymptotic study of plane and anti-plane states. The stress is singular at the crack tip and the order of this singularity is one out of two. The singularity amplitude is quantified by the stress intensity factors (SIF), one for each of the three loading modes. In 3D, the crack shape is potentially complex (front curvature and non-planar crack), and no general asymptotic series expansion exists. In this PhD thesis, the 2D Williams' series in displacements are used and regularized with a finite element evolution along the front. From this 3D definition of the asymptotic fields in the crack tip vicinity, a numerical method for direct estimation of the SIF (DEK-FEM) is extended to 3D. This method is based on domain decomposition, the two domains are bounded in a weak sense on their interface. In the crack tip vicinity, the mechanical fields are approximated by a truncation of the asymptotic series expansion. Therefore, appropriate fields are used to deal with the singularity, and the associated degrees of freedom are directly the asymptotic coefficients. Among these coefficients are the SIF and the T-stresses. To bridge the scales between the structure and the crack front singularity and to increase the numerical efficiency, this method is embedded in a localized X-FEM multigrids approach. The proposed method is shown to provide an accurate evaluation of the SIF and T-stresses evolution. This approach has been developed in combination of an experimental post-processing method (full field displacement measurement through image correlation) based on the same asymptotic series expansion. The 3D images can be obtained for in situ fatigue experiments by X-ray microtomography and reconstruction. The crack geometry and the SIF are then provided by image correlation and regularization based on Williams series expansion. These data can be used for identifying a 3D fatigue crack growth law. The efficiency of the method is illustrated in 2D
Zeghloul, Abderrahim. "Comparaison de la propagation en fatigue des fissures courtes et des fissures longues." Grenoble 2 : ANRT, 1988. http://catalogue.bnf.fr/ark:/12148/cb37619253w.
Повний текст джерелаBrundin, Carl. "Alternative energy concepts for Swedish wastewater treatment plants to meet demands of a sustainable society." Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-146831.
Повний текст джерелаКниги з теми "Cracking intensity"
Pang, H. L. J. A literature review of stress intensity factor solutions fora weld toe crack in a fillet welded joint. East Kilbride: National Engineering Laboratory, 1991.
Знайти повний текст джерелаA back face strain compliance expression for the compact tension specimen. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.
Знайти повний текст джерелаS, Piascik Robert, and Langley Research Center, eds. A back face strain compliance expression for the compact tension specimen. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.
Знайти повний текст джерелаЧастини книг з теми "Cracking intensity"
Saouma, Victor E., and M. Amin Hariri-Ardebili. "Ground Motion Intensity Measures." In Aging, Shaking, and Cracking of Infrastructures, 529–48. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-57434-5_22.
Повний текст джерелаHuang, Qinshou. "Dynamic Response Analysis of Stress Intensity Factor of Reflective Cracking in Asphalt Pavement Addition." In Lecture Notes in Civil Engineering, 373–84. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-5217-3_37.
Повний текст джерелаCasey, Dermot B., James R. Grenfell, and Gordon Airey. "3D Longitudinal and Transverse Cracking and the Influence of Non-Uniform Contact Pressure on the Stress Intensity Factors of these Cracks." In Materials and Infrastructures 1, 365–79. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119318583.ch26.
Повний текст джерелаKim, Young Suk, Sang Bok Ahn, Kang Soo Kim, and Yong Moo Cheong. "Temperature Dependence of Threshold Stress Intensity Factor, KIH in Zr-2.5Nb Alloy and Its Effect on Temperature Limit for Delayed Hydride Cracking." In Experimental Mechanics in Nano and Biotechnology, 919–22. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-415-4.919.
Повний текст джерелаZhou, F., S. Hu, and X. Hu. "Using semi-analytical finite element method to evaluate stress intensity factors in pavement structure." In Pavement Cracking. CRC Press, 2008. http://dx.doi.org/10.1201/9780203882191.ch62.
Повний текст джерелаSankararaman, Shankar, You Ling, and Sankaran Mahadevan. "Fatigue Crack Growth Analysis and Damage Prognosis in Structures." In Emerging Design Solutions in Structural Health Monitoring Systems, 207–33. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-8490-4.ch010.
Повний текст джерела"Cracking and Oxidative Dehydrogenation of Ethane to Ethylene: Process and Intensifi cation Options." In Industrial Catalysis and Separations, 318–59. Apple Academic Press, 2014. http://dx.doi.org/10.1201/b17114-19.
Повний текст джерелаTsybulskyi, Vitalii. "IMPROVEMENT OF CALCULATION METHOD OF ROAD PAVEMENT EMBANKMENT ON THE APPROACHES TO ROAD BRIDGES." In Integration of traditional and innovation processes of development of modern science. Publishing House “Baltija Publishing”, 2020. http://dx.doi.org/10.30525/978-9934-26-021-6-41.
Повний текст джерелаТези доповідей конференцій з теми "Cracking intensity"
Kostrivas, Tasos, Lee Smith, and Mike Gittos. "Sustained Load Cracking of Titanium Alloy Weldments." In ASME 2005 24th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2005. http://dx.doi.org/10.1115/omae2005-67474.
Повний текст джерелаHomrossukon, Samerjit, Sheldon Mostovoy, and Judith A. Todd. "Investigation of Hydrogen Assisted Cracking in Pressure Vessels." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93923.
Повний текст джерелаSano, Hayato, Koji Takahashi, and Kotoji Ando. "Prevention of Stress Corrosion Cracking of SUS304 by Tensile Overload." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25573.
Повний текст джерелаRudland, D., D. J. Shim, and A. Csontos. "Natural Flaw Shape Development Due to Stress Corrosion Cracking." In ASME 2008 Pressure Vessels and Piping Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/pvp2008-61205.
Повний текст джерелаShim, Do-Jun, Fredrick Brust, and Gery Wilkowski. "Accounting for Natural Crack Growth Shapes During Environmental Cracking." In 2012 9th International Pipeline Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ipc2012-90570.
Повний текст джерелаRichards, Mark D., Timothy S. Weeks, J. David McColskey, Bo Wang, and Yong-Yi Wang. "Fatigue Pre-Cracking Curved Wide Plates in Bending." In 2010 8th International Pipeline Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ipc2010-31468.
Повний текст джерелаLam, Poh-Sang, Changmin Cheng, Yuh J. Chao, Robert L. Sindelar, Tina M. Stefek, and James B. Elder. "Stress Corrosion Cracking of Carbon Steel Weldments." In ASME 2005 Pressure Vessels and Piping Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/pvp2005-71327.
Повний текст джерелаTakahashi, Koji, Yuji Miyazaki, Yasuaki Hashikura, and Kotoji Ando. "Improvement of the Threshold Stress Intensity Factor for Stress Corrosion Cracking in SUS316 by Tensile Overload." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25610.
Повний текст джерелаZhang, Yi-liang, Rui-bin Gou, Ji-min Li, Gong-tian Shen, and Jing Wang. "Experimental Study on Critical Derivative of Cracking Magnetic Field Intensity in High Frequency Fatigue Test." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25531.
Повний текст джерелаNibur, K. A., B. P. Somerday, C. San Marchi, and D. K. Balch. "Measurement of Sustained-Load Cracking Thresholds for Steels in Hydrogen Delivery and Storage." In ASME 2008 Pressure Vessels and Piping Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/pvp2008-61298.
Повний текст джерелаЗвіти організацій з теми "Cracking intensity"
FATIGUE PERFORMANCE OF RIB-TO-DECK JOINTS STRENGTHENED WITH INTERNAL WELDING. The Hong Kong Institute of Steel Construction, August 2022. http://dx.doi.org/10.18057/icass2020.p.268.
Повний текст джерела