Дисертації з теми "CPFE"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "CPFE".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Djakovitch, Laurent. "L'activation des arènes par le greffon CpFe+ : synthèse d'arbres moléculaires réservoirs polyélectroniques." Bordeaux 1, 1995. http://www.theses.fr/1995BOR10515.
Повний текст джерелаRabaa, Hassan. "Etude theorique de l'activation de liaisons sigma par des entites organometalliques mononucleaires et structure electronique de complexes cpfe(arene)." Rennes 1, 1987. http://www.theses.fr/1987REN10063.
Повний текст джерелаRabaa, Hassan. "Etude théorique de l'activation de liaisons o par des entités organométalliques mononucléaires et structure électronique de complexes CpFe (arène)." Grenoble 2 : ANRT, 1987. http://catalogue.bnf.fr/ark:/12148/cb37609076s.
Повний текст джерелаPurushottam, Raj Purohit Ravi Raj Purohit. "Understanding mechanical size effects in metallic microwires : synergy between experiment and simulation." Thesis, Poitiers, 2018. http://www.theses.fr/2018POIT2290/document.
Повний текст джерелаPolycrystalline metallic microwires produced by cold-drawing exhibit significant mechanical strength that make them ideal candidates for reinforcement of composites. Previous studies on polycrystalline pure nickel wires have indicated a significant size dependence of their yield and tensile strength as well as their ductility. The aim of this study is to understand these size effects by in-situ X-ray diffraction (XRD) analysis and crystal plasticity finite element (CPFE) simulations. In-situ monotonous and cyclic tensile tests under synchrotron radiation were carried on microwires with diameters ranging from 100 to 40 µm. The commercially obtained 100µm as-drawn wires exhibit a core-shell architecture with <111> fiber texture dominant in core and heterogeneous dual fiber texture <111> and <100> in the shell. Reduction of specimen size by electropolishing leads to wires having a homogeneous microstructure, whereas reduction of specimen size by further cold drawing leads to wires with a sharper texture while retaining the core-shell architecture.The yield and tensile strength of the electropolished wires increase with decreasing diameter, whereas the ductility decrease with decreasing diameter. In the case of cold-drawn wires, the yield and tensile strength, and also the ductility was observed to increase with decreasing diameter. The XRD analysis indicates successive yielding of grain families under iso-strain condition. The gradient in the texture of the microwire was seen to activate deformation mechanisms which are not seen for microwires with homogeneous texture. To understand the influence of different microstructural parameters, and notably the influence of crystallographic texture, 3D representative microstructure was generated and CPFE simulations were carried out. The simulated average behavior of different grain families (<111>, <100>) agrees well with the experimental results. The CPFE simulations indicate heterogeneity in stress field across the microstructure in the presence of a gradient in crystallographic texture.We show that the microstructure engineering of micro-texture components (single- or dual-texture) and their spatial spread (homogenous or architectured) can be used as design guidelines for obtaining optimal microstructure in accordance with desired set of mechanical properties
Cristea, Emilian, and Hassan Gelle Khalif. "Critical success factors of potential CPFR implementations : Two manufacturing case studies in Sweden based on a pre-CPFR stage from the perspective of a buyer – seller relationship." Thesis, Internationella Handelshögskolan, Högskolan i Jönköping, IHH, Centre of Logistics and Supply Chain Management (CeLS), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-39767.
Повний текст джерелаQuintero, Eduardo, and Zhilin Li. "Importance of CPFR implementation in SME : Discovering the need and insights of CPFR as a supply chain strategy." Thesis, Högskolan i Gävle, Avdelningen för Industriell utveckling, IT och Samhällsbyggnad, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-13223.
Повний текст джерелаQuispe, Munarriz Katia. "“FACTORES PREDICTORES DE COLEDOCOLITIASIS EN PACIENTES SOMETIDOS A COLANGIOGRAFÍA RETRÓGRADA ENDOSCÓPICA EN EL HOSPITAL LUIS SAENZ-PNP”." Bachelor's thesis, Universidad Ricardo Palma, 2016. http://cybertesis.urp.edu.pe/handle/urp/744.
Повний текст джерелаDueñas, Nicolau María Belén. "ISO 9001 en el CPCE de Mendoza." Bachelor's thesis, Universidad Nacional de Cuyo. Facultad de Ciencias Económicas, 2015. http://bdigital.uncu.edu.ar/7512.
Повний текст джерелаFil: Dueñas Nicolau, María Belén. Universidad Nacional de Cuyo. Facultad de Ciencias Económicas.
Wu, Shiyi. "Corba version of Concordia Parallel Programming Environment (CPPE)." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0003/MQ59356.pdf.
Повний текст джерелаAhuja, Irene. "Computerized Provider Order Entry (CPOE) using Systems Engineering." Digital Commons at Loyola Marymount University and Loyola Law School, 2013. https://digitalcommons.lmu.edu/etd/342.
Повний текст джерелаStoll, Robert G. "Collaborative Planning Forecasting Replenishment (CPFR): Successful Implementation Attributes." Cleveland State University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=csu1292517604.
Повний текст джерелаLeandro, Neto Benedito. "Solitons de Yamabe e métricas CPE." reponame:Repositório Institucional da UnB, 2015. http://dx.doi.org/10.26512/2015.11.T.19359.
Повний текст джерелаSubmitted by Patrícia Nunes da Silva (patricia@bce.unb.br) on 2016-01-26T14:54:49Z No. of bitstreams: 1 2015_BeneditoLeandroNeto_Parcial.pdf: 248614 bytes, checksum: aa0e94e4558b4314ccdb73a1bce22eaf (MD5)
Approved for entry into archive by Marília Freitas(marilia@bce.unb.br) on 2016-01-26T14:55:51Z (GMT) No. of bitstreams: 1 2015_BeneditoLeandroNeto_Parcial.pdf: 248614 bytes, checksum: aa0e94e4558b4314ccdb73a1bce22eaf (MD5)
Made available in DSpace on 2016-01-26T14:55:51Z (GMT). No. of bitstreams: 1 2015_BeneditoLeandroNeto_Parcial.pdf: 248614 bytes, checksum: aa0e94e4558b4314ccdb73a1bce22eaf (MD5)
Provamos que (anti)self dual solitons gradientes (quasi) Yamabe com curvatura seccional positiva são rotacionais simétricos. Além disso, mostramos que, (anti)self dual solitons gradientes de Yamabe tem uma estrutura de produto torcido muito particular desde que a função potencial não tenha pontos críticos. Consideramos solitons gradientes de Yamabe conformes a espaços pseudo-Euclidianos n-dimensionais. Caracterizamos todos os solitons que são invariantes pela ação de um grupo de translação (n-1)-dimensional e obtemos os solitons tipo estável. Como aplicação, obtemos um exemplo de soliton gradiente de Yamabe estável completo, conforme a um espaço Lorentziano. Investigamos também os pontos críticos do funcional curvatura escalar total restrito a um espaço de métricas com curvatura escalar constante e volume unitátio que denotamos por métricas CPE. Foi conjecturado nos anos 1980 que toda métrica CPE é, necessariamente, Einstein. Provamos que métricas CPE, no caso de dimensão quatro, com tensor W+ harmônico são isométricas à esfera S4 dada uma condição integral. No caso n-dimensional, provamos uma condição necessária e suficiente sobre a norma do gradiente da função potencial para que a métrica CPE seja Einstein.
We prove that an (anti)self dual quasi Yamabe gradient soliton with positive sectional curvature is rotationally symmetric. We also prove that four dimensional (anti) self dual gradient Yamabe soliton has a special warped product structure provided that the potential function has no critical points. We consider gradient Yamabe solitons, conformal to an n-dimensional pseudo-Euclidean space. We characterize all such solitons which are invariant under the action of an (n-1)-dimensional translation group and we obtain the steady solitons. Applications provide an explicit example of a complete steady gradient Yamabe soliton, conformal to the Lorentzian space. We also investigate the critical points of the total scalar curvature functional restricted to space of metrics with constant scalar curvature of unitary volume, for simplicity CPE metrics. It was conjectured in the 1980's that every CPE metric must be Einstein. We prove that a 4-dimensional CPE metric with harmonic tensor W+ must be isometric to a round sphere S4 provided an integral condition is satisfied. We also give a necessary and sufficient condition on the norm of the gradient of the potential function for a CPE metric to be Einstein.
Segura, Mejía María de Fátima, and Cerón José Amado Vázquez. "“Uso de Midazolam y Fentanilo requerido para obtener sedoanalgesia adecuada en la realización de colangiopancreatografía retrógrada endoscópica en pacientes del Centro Médico Lic. Adolfo López Mateos del 07 de marzo del 2012 al 07 de septiembre del 2012.”." Tesis de Licenciatura, Medicina-Quimica, 2013. http://ri.uaemex.mx/handle/123456789/14220.
Повний текст джерелаSachidanandam, Sivanarulselvan. "Why Physicians Do Or Do not Use Computerized Physician Order Entry Systems: Applying the Technology Acceptance Model." Connect to this title online, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=bgsu1151258487.
Повний текст джерелаLe, Guenic Sarah. "Dehydration in aqueous media." Thesis, Compiègne, 2015. http://www.theses.fr/2015COMP2238/document.
Повний текст джерелаThe 1990s have witnessed the development of Green Chemistry with the first researches on the subject and the introduction of the Twelve Principles. Since then, the number of scientific works on Green Chemistry has continuously grown. This PhD work focus on the development of dehydration methods to form high added value molecules by using the Twelve Principles of Green Chemistry as a guiding framework. Two target molecules were selected: (i) phenylacetaldehyde, obtained by the dehydration 1-phenylethane-1,2-diol, which is used in perfume compositions, for the preparation of pharmaceuticals, insecticides, etc., or as a chemical intermediate; and (ii) furfural, formed thanks to the triple dehydration of D-xylose (the main sugar unit of hemicellulose), which can be used as a selective solvent or as a platform molecule to produce a wide range of high-value chemicals. The optimisation of green production processes was focused on several key points: solvents (water and the eco-friendly CPME), activation method (microwave irradiation and continuous flow) and catalysis (metal chlorides and ion-exchange resin)
Borges, Wagner Luis. "Uma análise na implantação do CPFR em empresas de varejo." Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/18/18156/tde-02052012-114021/.
Повний текст джерелаThe management of the supply chain, its complexities and challenges related to the interaction between the links, which are usually formed by companies from different cultures and structures, bring challenges to the interaction of these links. Some initiatives in supply chain management with collaboration concepts are used, with the purpose of providing greater interaction along the supply chain. One such initiative called CPFR, we propose a design in collaborative planning, forecasting and replenishment, and has been adopted between retailers and suppliers. Their results, its advantages, its processes and barriers to its implementation through a methodology adopted by VICS® are exposed, however, little has been evidenced in these studies the relationship in terms of maturity required to deploy a collaborative activity in the retail supply chain. The collaboration may require efforts that can be made in addition to structural issues within an organization. This work aims to propose a collaborative evaluation of these aspects in the implementation of CPFR. For this, the theme and design CPFR collaboration in the supply chain have been reviewed and were used multi-use cases where CPFR has been deployed in Brazilian retail. The results of these case studies point to the most difficult aspects of collaboration required in the implementation of CPFR or during her than structural or technological aspects. Thus, the understanding of these aspects in use with the collaborative methodology based on the model of VICS® or any other employee, shows that the understanding of the collaborative aspects when deploying CPFR in retail businesses is an important support the deployment process.
Guéninchault, Nicolas. "Étude expérimentale et numérique des premiers stades de la plasticité dans un polycrystal CFC par topotomographie aux rayons X et CPFEM." Thesis, Paris Sciences et Lettres (ComUE), 2017. http://www.theses.fr/2017PSLEM026/document.
Повний текст джерелаUnderstanding the intimate details of plastic deformation in polycrystalline materials is an important issue to improve material design and ultimately produce safer structural parts with less impact on the environment. This understanding is presently limited by our ability to observe both the microstructure of the material and the deformation processes in three dimensions (3D) at small length scales and inform mechanical simulations with physical deformation mechanisms of the crystal lattice. Considerable progress has been made in the last decade with surface observation (eg EBSD coupled to digital image correlation) which led to numerous studies combining experimental observations and simulations from the surface microstructure. However, an accurate comparison without knowing the underlying microstructure remain challenging. In this work, we propose a new methodology which allows a quantitative comparison between the observation of deformation mechanisms, the evolution of the grain lattice curvature and the simulated mechanical fields.For that purpose, a mechanical stress rig dedicated for synchrotron 4D diffraction imaging experiments has been designed, and used to deform an Aluminium-Lithium specimen under tension. The 3D grain map has been obtained by diffraction contrast tomography analysis, and a cluster of three grains within the bulk has been selected to be the region of interest of the 4D observation by X-ray topotomography. The appearance and evolution of 3D crystalline defects as a function of the applied load has been observed to be located along well defined crystallographic planes. All three grains showed plastic activity on along two different set of planes, which is not always coherent with a macroscopic Schmid Factor analysis. The change of the amplitude and the orientation of the average grain curvature has been measured with an unprecedented level of detail by means of 3D rocking curve analysis.In parallel, crystal plasticity finite element (CPFE) simulations have been carried using the 3D grain map measured experimentally. Tension loading was applied to reproduce the experiment numerically and compare the plastic activity on a grain by grain basis. The slip system activity predicted by the model matches in most cases the observed two slip system scenario. A mathematical framework to predict the local Bragg angle based on the stretch and rotation of the crystal lattice by the elastic strain tensor was derived. Post-processing the intragranular strains fields from the CPFE results allowed to simulate 3D rocking curves, showing excellent agreement with the experimental measurements. This result confirms that in situ X-ray topotomography is a promising tool to study the early stage of polycrystal plasticity within the bulk of millimetric material specimens
Dowell, Simon J. "A functional analysis of yeast CPF1 and comparison with mammalian USF." Thesis, University of Oxford, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303647.
Повний текст джерелаRasheed, Bilal. "A novel targeted DNA insertion system using Cpf1 and Himar transposase." Thesis, Rasheed, Bilal (2022) A novel targeted DNA insertion system using Cpf1 and Himar transposase. Honours thesis, Murdoch University, 2022. https://researchrepository.murdoch.edu.au/id/eprint/66118/.
Повний текст джерелаO'Sullivan, Harrison. "CRIPTIC-12a: A novel CRISPR Programmable Transposon Insertion system using Cas12a (Cpf1)." Thesis, O'Sullivan, Harrison (2020) CRIPTIC-12a: A novel CRISPR Programmable Transposon Insertion system using Cas12a (Cpf1). Honours thesis, Murdoch University, 2020. https://researchrepository.murdoch.edu.au/id/eprint/63541/.
Повний текст джерелаKent, Nicholas A. "Chromatin modulation in Saccharomyces cerevisiae by Centromere and Promoter Factor 1." Thesis, University of Oxford, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.359458.
Повний текст джерелаFazal, Mohammed. "Understanding the microstructural efects in a large grain cast nickel-based superalloy." Thesis, University of Manchester, 2018. https://www.research.manchester.ac.uk/portal/en/theses/understanding-the-microstructural-efects-in-a-large-grain-cast-nickelbased-superalloy(a6255d81-ba70-48ed-a5bc-917ae1e95fb4).html.
Повний текст джерелаLenoir, Chloe. "EVALUATING THE VALIDITY AND RELIABILITY OF PSYCHOLOGICAL FLEXIBILITY MEASURES IN CHILDREN AND ADULTS." OpenSIUC, 2020. https://opensiuc.lib.siu.edu/theses/2777.
Повний текст джерелаRondinelli, Simone Franco. "A exploração da lambreta, Lucina pectinata (Bivalvia, Mollusca), nos manguezais de Garapuá – Baixo Sul da Bahia, Brasil." reponame:Repositório Institucional da UFBA, 2013. http://www.repositorio.ufba.br/ri/handle/ri/12657.
Повний текст джерелаApproved for entry into archive by Alda Lima da Silva(sivalda@ufba.br) on 2013-08-20T20:57:10Z (GMT) No. of bitstreams: 1 Dissertacao_Simone Franco Rondinelli.pdf: 1108660 bytes, checksum: b44c0207b461bcd48341159bdf12f82d (MD5)
Made available in DSpace on 2013-08-20T20:57:10Z (GMT). No. of bitstreams: 1 Dissertacao_Simone Franco Rondinelli.pdf: 1108660 bytes, checksum: b44c0207b461bcd48341159bdf12f82d (MD5)
Fapesb
Recursos pesqueiros constituem importante fonte de renda e proteína indispensáveis à subsistência de populações tradicionais da zona costeira. Na Vila de Garapuá - BA, a lambreta, Lucina pectinata, é o principal recurso explorado nos manguezais. O presente estudo teve como objetivo testar se em áreas menos exploradas, os indivíduos de L. pectinata teriam maiores densidades e maiores comprimentos, e se houve diminuição entre cpues anuais. Foram realizadas amostragens mensais em dois habitats (canais e quizangas) em seis áreas de manguezal através de quadrados aleatórios. Os resultados indicaram que áreas mais próximas apresentaram densidades significativamente menores do que áreas mais afastadas. As densidades foram significativamente maiores nas quizangas, indicando que os indivíduos são mais facilmente capturados nos canais e/ou que os indivíduos ocorrem naturalmente em maiores densidades nas quizangas. Houve um aumento significativo na cpue mensal de lambreta, de 18,2 (2001) para 19,3 dz./marisqueira/dia (2007), indicando que este estoque parece não estar sendo sobre-explorado. Todavia, as marisqueiras mais antigas relatam uma queda em sua captura diária, uma vez que esta espécie vem sendo explorada comercialmente há mais de 30 anos. Dessa maneira, a diferença de densidade entre áreas próximas e distantes à vila pode ser um efeito da exploração constante ao longo dos anos.
Salvador (BA)
Carter, Henry M. "Relationship Between Hospital Performance Measures and 30-Day Readmission Rates." ScholarWorks, 2016. https://scholarworks.waldenu.edu/dissertations/2958.
Повний текст джерелаEliscovich, Carolina. "Spindle-Localized CPE-Mediated Translation Controls Mediotic Chromosome Segregation." Doctoral thesis, Universitat Pompeu Fabra, 2008. http://hdl.handle.net/10803/7123.
Повний текст джерелаEn este trabajo que derivó en mi tesis doctoral, hemos demostrado que la activación traduccional localizada en el huso mitótico de mRNAs regulados por CPEB que codifican para proteinas con una conocida función en aspectos estructurales del ciclo celular como la formación del huso mitótico y la segregación cromosómica, es esencial para completar la primera división meiótica y para la correcta segregación cromosómica en oocitos de Xenopus.
Straube, Laurentia. "Import von ESBL und Carbapenemase bildenden Enterobaceriaceae durch Reisende nach Deutschland." Doctoral thesis, Universitätsbibliothek Leipzig, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-223778.
Повний текст джерелаNissom, Peter Morin. "A structural and functional analysis of CPF1, a bHLHZIP protein of Saccharomyces cerevisiae." Thesis, University of Oxford, 1998. http://ora.ox.ac.uk/objects/uuid:93828daa-84e6-419b-ac80-1b86108a414f.
Повний текст джерелаCOURI, VICTOR BARROS. "ANALYSIS AND PERSPECTIVES FROM EMPIRICAL STUDIES IN COLLABORATIVE PLANNING, FORECASTING AND REPLENISHMENT (CPFR)." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2017. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=31966@1.
Повний текст джерелаCONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
A prática do Planejamento, Previsão e Reabastecimento Colaborativo (em inglês, Collaborative Planning, Forecasting and Replenishment – CPFR) é um tema recente de integração de cadeias de suprimento que tem sido amplamente abordado na literatura acadêmica. O CPFR é considerado, para muitos pesquisadores, uma iniciativa mais completa e avançada que outros métodos de colaboração na cadeia, sendo, em alguns casos, uma extensão ou aprimoramento dos mesmos. O amadurecimento do tema é representado pela existência de revisões sistemáticas na literatura. Contudo, por ser o CPFR ainda um tema recente com acentuado crescimento de estudos na literatura, esta dissertação tem como objetivo realizar uma atualização destas revisões sistemáticas para verificar novos avanços no assunto, se lacunas ressaltadas já foram pelo menos parcialmente endereçadas e se tendências estão se consolidando. Mais ainda, em função da dificuldade de se implementar o CPFR na prática, um enfoque maior na análise dos estudos empíricos existentes com o objetivo de ir além de resultados parciais e particulares oferecidos na literatura é contemplado nesta dissertação, expandindo assim o escopo das revisões existentes com o foco específico em estudos empíricos. A dissertação apresenta seus resultados guiados em um framework de síntese para integração de cadeias focado em CPFR, tendo como base os passos para a condução de uma pesquisa empírica em gerência de operações, os blocos conceituais do CPFR e a contribuição dos estudos empíricos. Uma agenda para pesquisas futuras finaliza a dissertação.
The practice of Collaborative Planning, Forecasting and Replenishment (CPFR) is a recent topic of supply chain integration that has been extensively covered in academic literature. The CPFR is considered by several researchers a more complete and advanced initiative than other methods of collaboration in the chain, being in some cases an extension or improvement of them. The maturation of the theme is represented by the existence of systematic reviews in the literature. However, since CPFR is still a recent topic with a strong growth of studies in the literature, this dissertation aims to carry out an update of these systematic reviews in order to verify new advances in the subject, if highlighted gaps have been at least partially addressed, and also if trends have been consolidating. Moreover, due to the difficulty of implementing CPFR in practice, a greater focus on the analysis of existing empirical studies with the objective of going beyond partial and particular results offered in the literature is contemplated in this dissertation, thus expanding the scope of the existing reviews with specific focus on empirical studies. The dissertation presents its results guided by a synthesis framework for supply chain integration focused on CPFR, based on the steps for conducting an empirical research in operations management, the conceptual building blocks for CPFR and the contribution of the empirical studies. An agenda for future research concludes the dissertation.
Hoffstatter, John Arthur. "Preconceived Physician Attitude Toward Computerized Physician Order Entry (CPOE): Implications for Successful Implementation." UNF Digital Commons, 2004. http://digitalcommons.unf.edu/etd/240.
Повний текст джерелаRitter, Fernando Gomes. "Proposta para implementação de CPFR em empresa produtora de adesivos e seus clientes." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2003. http://hdl.handle.net/10183/2410.
Повний текст джерелаPereira, Julia Myriam de Almeida. "A atividade pesqueira na represa do Lobo-Broa (Itirapina, Brotas-SP): caracterização e composição da captura." Universidade de São Paulo, 2005. http://www.teses.usp.br/teses/disponiveis/18/18139/tde-15012006-113300/.
Повний текст джерелаIn 2002 the total production of fish in the world was 133,0 million tons. In Brazil, the total volume of fish was of 822,2 thousand tons, with 26,5% coming from freshwater fisheries. The Lobo-Broa reservoir (Itirapina, Brotas, SP; 22°15'S, 47°49'W), can have the sustainability of their fishing resources changed due to the proximity of cities as São Carlos and Itirapina. The general objective of this work was to study the sporting fisheries and their fishing gears, to do experimental fisheries and to study the compositions of the captures of both studies. The work was presented in eight chapters: (1) presentation, (2) socioeconomic characterization of the sporting fishermen, (3) description of the captures of the sporting fisheries, (4) description of the captures of the experimental fisheries, (5) statistical analyses on the both fisheries, (6) preliminary survey of the selectivity of the gillnets used in the experimental fisheries, (7) handling of fishing resources in reservoirs and (8) final considerations and recommendations. Among September and November of 2004 it was applied 38 questionnaires for socioeconomic evaluation of the sporting fishermen and these indicated that the fisheries are practiced mainly by men whose standard of living resembles each other to the population average of the country. Among September of 2002 to September of 2004, 1027 interviews were did on the captures in the three main places of sporting fisheries (praia, píer and horto florestal). The sporting fisheries are practiced with simple fishing rod and with reel, mainly in horto florestal, place that presented larger captures and where was concentrated the largest fishing effort. The capture is composed of Ciclídeos (cará, Geophagus brasiliensis, tilápia do Nilo, Oreochromis niloticus, tilápia do Congo, Tilapia rendalli and tucunaré Cichla monoculus), mainly, although the reservoir has not elevated fishing productivity. The seasonal variation and the bait use were not shown statistically significant. For fish fauna composition evaluation of the reservoir, seven experimental fisheries were accomplished between November of 2002 and September of 2004 in three places (horto/Itaqueri, meio and barragem), using gillnets. The species that had larger relative captures were the cará and the lambari rabo amarelo (Astyanax altiparanae) and the area with larger relative captures was the horto/Itaqueri. The seasonal variation and the daytime-nighttime variation were not statistically significant. It was detected the factors and the covariates statistically significant (P<0,05) on the captures of the studies above, being tested two models of analysis of covariance with three factors (3 way ANCOVA). The selectivity of the gillnets study for each species, for mesh size showed that the nets were selective for the lambari rabo amarelo, lambari rabo vermelho (Astyanax scabripinnis paranae), sagüiru (Cyphocharax modesta) and cará. For species as tuvira (Gymnotus carapo), cascudo (Hypostomus sp) and mandi (Pimelodella cf gracilis) this fishing gear was not selective. It was believed that the sporting fisheries should be motivated aiming the increment of the tourism in the area and increase of the fishing productivity of the reservoir. A larger understanding of the fishermen is urgent so that the bait stop being used, once this practice doesn't increase the captures and contributed to the eutrofication process in the reservoir
Spadoni, Alberto. "Confronto tra tecniche di clearance plasmatica nella sepsi." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2012. http://amslaurea.unibo.it/3524/.
Повний текст джерелаBrunk, Katja H. "Essays on consumer perceived ethicality (CPE) of companies and brands." Doctoral thesis, Universite Libre de Bruxelles, 2010. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/210027.
Повний текст джерела
Doctorat en Sciences économiques et de gestion
info:eu-repo/semantics/nonPublished
Hack, Beate. "Evaluierung der CPF-Technologie hinsichtlich der Mikroverkapselung von leichtflüchtigen Substanzen." kostenfrei, 2008. http://mediatum2.ub.tum.de/doc/633094/633094.pdf.
Повний текст джерелаPaccola, José Angelo. "Tarifas horosazonais no Brasil = perspectivas de inovações metodológicas e estudo de caso na CPFL." [s.n.], 2007. http://repositorio.unicamp.br/jspui/handle/REPOSIP/263075.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica
Made available in DSpace on 2018-08-19T02:38:12Z (GMT). No. of bitstreams: 1 Paccola_JoseAngelo_M.pdf: 1894026 bytes, checksum: 35049932286f9b2cae4ab204843bfb40 (MD5) Previous issue date: 2007
Resumo: Durante as últimas décadas, têm-se introduzido poucas modificações no setor elétrico brasileiro no que se refere às novas modalidades de tarifas para os consumidores finais. As mudanças mais radicais foram implantadas no início da década de oitenta com a introdução das tarifas horosazonais verde e azul. O objetivo desta dissertação é testar as possibilidades de se formular novas tarifas horosazonais no País, através de uma análise crítica da aplicação destas no Brasil e no mundo, e a realização de um estudo de caso envolvendo pesquisas de campo, entrevistas e medições em consumidores industriais atendidos na categoria tarifária A4. A análise da experiência nacional aborda a implantação e o desenvolvimento das tarifas horosazonais - verde, azul e amarela - e tarifas de fornecimento interruptível no País por meio de um histórico completo dos fatos mais importantes, ocorridos desde 1957 até 2006, e de uma avaliação dos resultados a que se chegou com a implantação destas tarifas. Na análise da experiência internacional, examinaram-se os casos de França, Canadá, Estados Unidos e Portugal. O estudo de caso envolveu três pesquisas de campo. A primeira delas teve como objetivo escolher os segmentos industriais com maior potencial para a modulação de carga. Com a segunda pesquisa, conseguiu-se conhecer melhor os consumidores dos segmentos de calçados e de móveis, em termos de perfil de demanda e de detalhes de seus processos produtivos, visando estabelecer, com mais segurança, suas possibilidades de modulação de carga. A terceira pesquisa de campo permitiu o levantamento dos dados técnicos e econômicos, necessários para se fazer simulações e uma avaliação quantitativa dos impactos econômicos decorrentes de um terceiro posto tarifário para estes consumidores, na madrugada. As análises custo/benefício, realizadas no estudo de caso, levaram em conta tanto a ótica do consumidor como a da concessionária. Os resultados das simulações realizadas mostraram que os custos com mão-de-obra chegam a ser 35 vezes maiores do que aqueles com a fatura de eletricidade nestes segmentos industriais. Isto desestimula um possível deslocamento de parte da produção para o período noturno, por conta do adicional noturno no custo da mão-de-obra, mesmo com tarifas de energia elétrica muito baixas neste período
Abstract: During the last decades, the Brazilian electric sector has introduced little changes in tariffs for end-use consumers. The most radical changes were implanted at the beginning of the eighties, with the introduction of a seasonal tariff structure called green and blue. The objective of this work is to test some possibilities to formulate a new seasonal tariff in Brazil, through a critical analysis of these tariffs in Brazil and in other countries. This was made through field researches, interviews and the measuring of some industrial consumers. The national experience analysis includes the implementation and development of the seasonal tariffs - green, blue and yellow -, the supply curtailable rate and a complete historical of the more important facts occurred since 1957 up to 2006, together with an evaluation of the impacts in the implementation of these tariffs. In the analysis of the international experience, it was examined tariffs in France, Canada, United States and Portugal. The case study involved three researches on the field. The first one was to choose the industrial segments with larger potential for load modulation. The second research explored both footwear and furniture industries in terms of theirs demand profile and productive processes, with the objective of establishing their load modulation change possibilities more accurately. The third field research obtained the necessary technical and economical data, to work with simulations in a quantitative analysis of the economic impacts of a third tariff position during night time. The cost-benefit analysis considered both consumers and Utility's point of views. The results of the simulations has shown that the cost of labor is sometimes 35 times higher than electricity bills in the footwear and furniture industries, rendering useless a possible load modulation change during the night. Furthermore, during night time the cost of labor increases
Mestrado
Planejamento de Sistemas Energeticos
Mestre em Planejamento de Sistemas Energéticos
McIntyre, Christopher. "CPFD Modeling of a Novel Internally Circulating Bubbling Fluidized Bed for Chemical Looping Combustion." Thesis, Université d'Ottawa / University of Ottawa, 2021. http://hdl.handle.net/10393/42054.
Повний текст джерелаTariq, Javid, and Sohail Sajid. "Robust Home Care Access Network." Thesis, Halmstad University, School of Information Science, Computer and Electrical Engineering (IDE), 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-2616.
Повний текст джерелаCritical networks e.g. telecare services, telemonitoring, are implemented to provide the information security and reliability that the end user desires, especially during an emergency. Unlike business carrier systems that are planned for the general public’s use, critical communication systems are designed particularly for public protection and other serious communication situations. Availability and reliability of such networks is highly desirable. The following thesis works to compare and analyze a variety of communication access technologies to find out the best primary means of data transportation for health critical services and model reliable communication link by using redundancy. This study also provides an efficient failover mechanism to implement redundant links. This strategy is intended to provide the reliable communication and to protect the established communication link.
Honniball, Peter Daniel. "The influence of temperature upon the deformation of alpha zirconium." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/the-influence-of-temperature-upon-the-deformation-of-alpha-zirconium(ea5d6180-0730-492f-89ab-04c6938398f1).html.
Повний текст джерелаWu, Sung-hua, and 吳松樺. "Synthesis of [CpFe(CO)]4-C60 Complexes by Prato Reaction." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/13667968936994327618.
Повний текст джерелаNiccolai, Gerald Peter. "I. Fenske-Hall molecular orbital studies of [CpM(CO)n]₂ complexes the interplay of metal-metal bonding and bridging and semibridging ligands : II. The photolytic dehydrogenation of the diiron alkylidene complex, [CpFe(CO)]₂([mu]-CO)([mu]-CHCH₂CH₂CH₂CH₃) /." 1992. http://catalog.hathitrust.org/api/volumes/oclc/31370805.html.
Повний текст джерела陳志強. "The replenishment model of CPFR." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/q68hxa.
Повний текст джерела國立政治大學
資訊管理研究所
96
CPFR (Collaborative Planning, Forecasting, and Replenishment) is one of the applications of collaborative business. The stressed concept is the cooperation process of sellers and buyers on the supply chain in order to increase the handling efficiency. In the future, the industries would compete on the whole supply chains behind products—only the industry that is capable of making accurate predictions according to the constantly changing market and reacts immediately has the chance of winning. Being able to control the inventory and supply effectively would be one of the key factors leading to an industry’s success. The replenishment model of CPFR is to fill out the order according to the sales prediction, order prediction, inventory strategy, and supply information. The precision of the replenishment model could affect both suppliers and customers. The former can distribute products properly and meet the different demands from the upcoming orders so as to reduce inventory; the latter are able to revise the inventory strategy and amount of order according to the order prediction. A few research papers aimed at the replenishment model, though, most still focus on the management issues like the process framework of CPFR and the implementation benefit. Hence, establishing both an information system that coordinates customer demand with suppliers and a collaborative replenishment model that increases the accuracy of predictions is fairly important. The phase of replenishment, as the subject of this study, will approach on parameters the collaborative replenishment model needs to input and combine evolution strategies with tabu search to establish a replenishment model under the process of CPFR.
Lai, Chih-Wei, and 賴志偉. "Process Modeling for CPFR System." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/7eya76.
Повний текст джерела國立臺北科技大學
機電整合研究所
95
In the competitive environment of global supply chain at this present, in order to satisfy more and more demands and expectations from customers, enterprises face many pressures such as cost reduction, short lead-time, quality promotion, and global operation management…etc. But enterprises can’t resolve this pressure by their own; instead, it shall be achieved by the collaboration and integration of overall business entities of supply chain based on the same targets. The VICS committee has published the standards for Collaborative Planning, Forecasting and Replenishment (CPFR), and CPFR has the revolutionary influence on supply chain. However, according to the relevant research and investigation, the applications of CPFR in Taiwan are not prevalent yet currently. Most of enterprises still have the issue of forecast and replenishment with their business entities, and can not reduce cost and shorten lead time effectively. The major cause is enterprises haven’t implemented a CPFR system to link and coordinate overall business entities of supply chain. According to this, this research are based on the enterprise’s demands on CPFR system and literatures review, and use seven-stages development methodology which are including define objectives, process modeling, data modeling, apply business rules, UI interface design, coding and testing. Then focus on the key stages of define objectives and process modeling, and provide a collaborative process modeling that is suitable for overall business entities of supply chain (including four organizations: global operation, subsidiary, factory and buyer). Hopefully, the process modeling will help who are planning to implement a CPFR system. Besides, in order to promote the service capability of orders with multiple deliveries, the process modeling in this research integrate the technology of real-time CTP to shorten lead time and reduce cost based on the well operation of capacity and inventory.
Tinková, Veronika. "Stanovení aminoanthrachinonu na CPE." Master's thesis, 2007. http://www.nusl.cz/ntk/nusl-380581.
Повний текст джерелаChen, Chang Chih, and 陳長志. "Construct the Key Operation Mechanism in CPFR." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/84714044556412567231.
Повний текст джерела國立高雄應用科技大學
工業工程與管理系碩士班
93
VICS association proposed the Collaborative Planning, Forecasting and Replenishment (CPFR ) model in 1998, it is one of the latest and important ways in the supply chain collaboration management field. Through the nine steps of the CPFR that will lead the forecasting in the collaborative supply chain to be more promissory, and let the replenishment be more efficient. In order to let CPFR be carried out smoothly, this research set the development cycle of the Key performance index, develops the information sharing mechanism of the across organization, and constructs collaborative management by exception mechanism model. Through the three core operation mechanisms constructed in this research that can help enterprises when inject into CPFR to be depend on operation procedure followed, in order to let enterprises succeed while carrying out the CPFR. A shaft bearing company is considered as case study, through the case company to verify the three core operation mechanisms in CPFR which constructed in this research are able to be carried out. Besides, this research can provide the case company to understand the implementation structure and procedure of the whole CPFR even more. At the same time , according to the detail operation procedure of three core operation mechanisms which constructed in this research could to remedy and strengthen stipulating in KPI of case company, could help the case company to choice the information sharing partners in the supply chain and remedy the deficiency of the handling exception mechanism. In general, the three core operation mechanisms lead the case company to execute the CPFR going smoothly, and make it obtain success.
張怡筠. "Key Factors of Rolling Forecast on CPFR." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/02021556096823071648.
Повний текст джерелаYang, Cheng-Wei, and 楊政威. "CPFR Chain Process in Multi-Channel Retailing." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/98649757369068642692.
Повний текст джерела明志科技大學
工程管理研究所
93
The enterprises are facing globe competition due to the development of information technology and internet. There are two directions for enterprises to keep the competition. For company operation, the enterprises focus on product quality, cost, and operation improvement. For market side, the enterprises try to expend marketing channel and collaboration with other company in order to growth up market share. The Supply Chain Management (SCM) is more and more important for company operation. The CPFR (VICS, 1998) are widely discussion in Supply Chain Management. The CPFR significant improve the sales forecast and reduce the stock have been proved in many cases. When the enterprises expend the marketing channel, it will have different lead time, quantity of lots, operation types by different customer and channels. The enterprises usually have low profit because of high stock for uncertain environment. As the previous research, this research is discussing the CPFR help to improve the sales forecasts and stock when the company expends new channels. In this research, it is a case study for a company which possesses multi-channel and operation process. The study develops a sales forecast model base on CPFR model. Result suggests that this sales model improves sales forecast. Besides, if the CPFR are used in whole supply chain members, the supply chain has become to CPFR Chain, and will improve the sales forecast and reduce the stock of whole supply chain. This cases study can be a reference for further research.
Lin, Shih-Wen, and 林仕文. "Automating CPFR''s replenishment mechanism with BPEL4WS." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/96766301657306252211.
Повний текст джерела國立臺北大學
資訊管理研究所
91
The popular supply chain management solution — Collaborative Planning, Forcasting, and Replenshment (CPFR) has been provided by many vendors. However, the current CPFR solutions are usually an ad hoc approach in nature by utilizing middleware to connect disparate ERP systems. These solutions neither employ a unified descriptive framework to facilitate portability and understanding, nor did the solution is amenable to popular information infrastructure. To amend the insufficiencies of current solutions, we use a popular business process modeling language — BPEL4WS to model the CPFR. We have successfully build the prototype using BPEL4WS to demonstrate the feasibililties.
Yan-Liang, Liu, and 劉延良. "Performance Analysis of Store-level CPFR Implementation." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/49236995988362206966.
Повний текст джерела南台科技大學
企業管理系
97
In a multi-class supply chain structure, all levels become less attracted by the market reaction because of the information inconsistency between the upper and lower levels. This situation often makes the increasing of inventory and not only expend a lot of costs but also affects the acquisition of profits. CPFR is a collaborative planning, forecasting and replenishment systems, and it mainly promote the trading partner relationship between retailer and supplier by sharing information. CPFR also create an environment that meets the need of consumers by providing an operating flow that integrates both side of supply and demand. This study focuses on store-level CPFR which means individual retailer coordinates with supplier. The researcher established three different CPFR operation and simulation models to analyze the CPFR performance under different models and the effect of various factors. This helps companies to choose the most suitable CPFR model for them when trying to practice it. The factors mentioned above include demand type, inventory policies, lead time and the producing capacity of supplier. With the experimental design of this study, the data collected by simulation was analyzed by ANOVA. The result revealed that there were significant differences between three workflows. Model A is non-CPRF which shows the lowest inventory costs and shortage cost but the highest total system cost, so it makes the worst performance on supply chain. The more influential factors of model A are demand type, lead time and the producing capacity of supplier. Model B is a DC-level CPFR which shows the highest inventory cost and the second highest total system cost, so it makes the second best performance on supply chain. Model C is a store-level CPFR which shows the lowest ordering cost and total system cost, so it makes the best performance on supply chain among the three operating flows. The more influential factors of model B and model C are demand type and the producing capacity of supplier. Keyword: Store-level CPFR、Simulation、CPFR
Tsao, Hui-hua, and 曹慧華. "CPFR CASE STUDY FOR CONTACT IMAGE SENSOR." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/88196914922423770769.
Повний текст джерела東吳大學
企業管理學系
97
In the fast-changing industry enviroment, enterprises have paid a lot of money to invest new technology and new market to gain their own competition advantage. But the new technology progressing and material cost rasing make enterprises faced more difficult business competition. Therefore, the various strategic alliance and cooperation are established. This research is to make the in-depth case analysis for three MFP makers how to cooperate with CIS suppliers and enhance their operational agility by CPFR (Collaborative Planning, Forecasting,and Replenishment ) with information sharing。 We can investigate and survey their individual cooperating result. Usually, the data of order forecasting exists uncertainly and vagueness which forced CIS suppliers to adjust their productin plan to catch the tight delivery, and the replenishment system of JIT and VMI caused the high inventory and low material cycling rate. Therefore, Rolling Forecasting has become a well-known and criticial solution. The research reveals some valuable sugestions are the best model of the order forecasting is to implement“VMI + Rolling Forecasting” system. It is helpful to decrease the high inventory & transportation cost to improve the supply chain performace. This model also can be a reference case for other industries.