Дисертації з теми "Corrosion effects"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Corrosion effects".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Ostrofsky, David. "Effects of corrosion on steel reinforcement." [Tampa, Fla.] : University of South Florida, 2007. http://purl.fcla.edu/usf/dc/et/SFE0002258.
Повний текст джерелаUpchurch, Marian. "The Effects of Chlorine on Boiler Corrosion." TopSCHOLAR®, 1994. http://digitalcommons.wku.edu/theses/954.
Повний текст джерелаLiu, Xiaodong. "Effects of stress on intergranular corrosion and intergranular stress corrosion cracking in AA2024-T3." Columbus, Ohio : Ohio State University, 2005. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1133313637.
Повний текст джерелаStanish, Kyle David. "Corrosion effects on bond strength in reinforced concrete." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp04/mq29397.pdf.
Повний текст джерелаGowda, Sunil. "MULTI-SCALE EFFECTS OF CORROSION ON STEEL STRUCTURES." University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1469007207.
Повний текст джерелаNamahoot, Jutatip. "Effects of deformations on corrosion of Al-Mn alloys." Thesis, University of Birmingham, 2005. http://etheses.bham.ac.uk//id/eprint/108/.
Повний текст джерелаKao, Tsu-Mu 1958. "Incorporating flow-accelerated corrosion effects into probabilistic risk assessment." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9402.
Повний текст джерелаBakare, Mayowa Sunday. "The effects of microstructural modifications on corrosion resistance of metallic corrosion resistant materials Inconel 625 and FeCrMoCB." Thesis, University of Nottingham, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.546474.
Повний текст джерелаMalka, Ramakrishna. "Erosion Corrosion and Synergistic Effects in Disturbed Liquid-Particle Flow." Ohio University / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1125603562.
Повний текст джерелаStone, Erica. "EFFECTS OF ORTHOPHOSPHATE CORROSION INHIBITOR IN BLENDED WATER QUALITY ENVIRONMENTS." Doctoral diss., University of Central Florida, 2008. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/2961.
Повний текст джерелаPh.D.
Department of Civil and Environmental Engineering
Engineering and Computer Science
Environmental Engineering PhD
Forslund, Mattias. "Micro-galvanic effects and corrosion inhibition of copper-zinc alloys." Doctoral thesis, KTH, Yt- och korrosionsvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-151189.
Повний текст джерелаMed utvecklingen av och tillgången till lokala analysmetoder som kan ge information med en lateral upplösning på mindre än en mikrometer har det blivit möjligt att analysera lokala korrosionsegenskaper hos industriellt viktiga metalliska material och relatera dessa egenskaper till mikrostrukturen hos samma material. I doktorsavhandlingen har denna möjlighet utnyttjats för koppar-zinkprover, dels som industriella mässingslegeringar dels som mikro-mönstrade koppar-zinkprover, som exponerats för utspädda kloridlösningar samt för en atmosfär som kan efterlikna den atmosfäriska korrosionen inomhus. Det huvudsakliga målet har varit att undersöka dels mikro-galvaniska korrosionseffekter som orsakas av heterogeniteter på koppar-zinkytorna dels korrosionsförmågan hos självorganiserande monolager av oktadekantiol (ODT, CH3(CH2)17SH) vid adsorption på dessa heterogena ytor. På så vis har den lokala kemin, ytkemin och elektrokemin kunnat klarläggas i närvaro av galvaniska effekter, och dess betydelse har undersökts för korrosionsprocessens initiering, propagering, terminering och inhibering. Ett brett spektrum av lokala analysmetoder har utnyttjats. De innefattar ljusoptisk mikroskopi (ex situ och in situ), elektrokemiska metoder, svepelektronmikroskopi med energidispersiv röntgen-spektroskopi, atomkraftsmikroskopi för mikro-kartering och Voltapotentialmätningar samt konfokal Raman-spektroskopi. Dessutom har infrarödreflektions absorptionsspektroskopi (in situ) och vibrationssummafrekvens spektroskopi (engelska: vibrational sum frequency generation) använts. När en mässingslegering exponerades för 1 mM NaCl observerades en selektiv utlösning av zink med karakteristiskt utseende som växte radiellt från icke-metalliska inneslutningar för att bilda cirkulärt formade korrosionsområden. Formen och termineringen av denna korrosionsprocess bestäms av tillgången på kloridjoner. När ett monolager av ODT adsorberades på mässingslegeringen hämmades tillgången av kloridjoner på mässingsytan och den radiella korrosionsprocessen stannade upp. Istället iakttogs en fördröjd bildning av s.k. filiform korrosion. Vid exponering av mikro-mönstrade koppar-zinkprover för befuktad luft med låga tillsatser av myrsyra inducerades mikro-galvaniska effekter i gränsen mellan koppar och zink som accelererade utlösningen av zink i den adsorberade fuktfilmen på provet, under samtidig utfällning av zinkformat. De mikro-galvaniska effekterna resulterade inte bara i förhöjda korrosionshastigheter jämfört med de på ren zink, utan även i andra faser hos bildade korrosionsprodukter. På de mikro-mönstrade koppar-zinkproverna bildades kristallint zinkoxid och zinkformat, under det att amorft zinkoxid och zinkhydroxyformat bildades på ren zink. Mikrogalvaniska effekter observerades även i den tvåfasiga mässingslegeringen Cu40Zn (Cu med 40 vikt-% Zn) orsakade av kontakten mellan den mer zinkrika beta-fasen och den omgivande alfa-fasen med lägre zinkhalt. Appliceringen av ett självorganiserat monolager av ODT för korrosionsinhibering av ren zink och koppar-zinkprover har också undersöks. In situ infrarödreflektions absorptionsspektroskopi visade att adsorberat ODT initialt hämmade bildningen av zinkformat på ren zink och på de mikro-mönstrade koppar-zinkproverna. Med tiden minskade ODTs korrosionsinhiberings-förmåga på grund av att ODTs vidhäftning lokalt försvann. De mikro-galvaniska effekter som därigenom uppstod resulterade i bildandet av zinkformat som med tiden blev snabbare på de ODT-belagda proverna än på motsvarande prover utan ODT. När ODT applicerades på den enfasiga mässingslegeringen Cu20Zn resulterade detta i en korrosionsinhibering som var jämförbar med den på ren koppar, en metall på vilken ODT tidigare visat mycket bra korrosionsskydd. På den tvåfasiga mässingslegeringen Cu40Zn ledde lokala galvaniska effekter till en mindre effektiv korrosions-inhibering och en rikligare mängd korrosionsprodukter än på Cu20Zn. Baserat på vibrationssummafrekvens spektroskopi behöll ODT-lagret dess välordnade struktur under hela exponeringen på både Cu20Zn och Cu40Zn. ODTs korrosionsinhibering tillskrivs främst transport-hämningen av korrosionsstimulatorer (O2, H2O och HCOOH) till mässingsytan och antyder att ODT kan fungera som en temporär korrosionsinhibitor för mässing i milda inomhusmiljöer.
QC 20140915
Batt, Joanna Mary. "The biological effects of titanium corrosion products on gingival epithelium." Thesis, University of Birmingham, 2017. http://etheses.bham.ac.uk//id/eprint/7810/.
Повний текст джерелаZhang, Yan. "Relative Effects of Water Chemistry on Aspects of Iron Corrosion." Thesis, Virginia Tech, 2005. http://hdl.handle.net/10919/35501.
Повний текст джерелаMaster of Science
Jauseau, Nicolas. "Multiphase Flow Effects on Naphthenic Acid Corrosion of Carbon Steel." Ohio University / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1354149810.
Повний текст джерелаLewis, Jeremy D. "The Effects of Corrosion on Reinforced Concrete with Fiber Addition." University of Akron / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=akron1355171708.
Повний текст джерелаLiang, Dong. "Environmental and Alloying Effects on Corrosion of Metals and Alloys." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1243995273.
Повний текст джерелаGriffin, Allian Sophia. "Corrosion in New Construction:Elevated Copper, Effects of Orthophosphate Inhibitors, and Flux Initiated Microbial Growth." Thesis, Virginia Tech, 2010. http://hdl.handle.net/10919/76951.
Повний текст джерелаMaster of Science
Sapiro, David O. "The Effects of Alloy Chemistry on Localized Corrosion of Austenitic Stainless Steels." Research Showcase @ CMU, 2017. http://repository.cmu.edu/dissertations/1087.
Повний текст джерелаHill, Lisa. "On the effects of special boundary geometries on intergranular corrosion and grain boundary evolution in aluminium." Thesis, Swansea University, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.678451.
Повний текст джерелаZarouni, Ismael. "Effects of admixtures on chloride-induced corrosion of steel in concrete." Thesis, University of Leeds, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.438568.
Повний текст джерелаBogen, Daniel J. "Effects of Manufacturing Defects on the Corrosion of Additively Manufactured AlSi10Mg." Youngstown State University / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1596641889374996.
Повний текст джерелаWang, Hua. "Effects Of Microbial Attachment And Biofilm Formation On Microbiologically Influenced Corrosion." University of Akron / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=akron1396543805.
Повний текст джерелаAbdulwahhab, Yousuf. "Investigations of Corrosion Effects at High Temperatures and High Pressure Conditions." Thesis, Curtin University, 2020. http://hdl.handle.net/20.500.11937/84146.
Повний текст джерелаKang, Chiun-Chia. "Moisture and stress effects on fretting between steel and polyimide coatings." Diss., This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-06062008-171727/.
Повний текст джерелаMiller, Jason. "Devitrification Effects on the Structure and Corrosion of an Fe-based Bulk Metallic Glass." Cleveland, Ohio : Case Western Reserve University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=case1252371978.
Повний текст джерелаTitle from PDF (viewed on 2010-01-28) Department of Materials Science and Engineering Includes abstract Includes bibliographical references and appendices Available online via the OhioLINK ETD Center
Linder, Jenny. "Alcoholate corrosion of aluminium in ethanol blends -the effects of water content, surface treatments, temperature, time and pressure." Thesis, KTH, Skolan för kemivetenskap (CHE), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-145856.
Повний текст джерелаMitre, Cirlei Igreja do Nascimento. "Efeitos de um campo magnético aplicado na corrosão de cobre monitorado in situ por RMN." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/75/75135/tde-04082017-151644/.
Повний текст джерелаIn this Masters dissertation the corrosion of metallic copper samples was monitored in situ and ex situ by time domain nuclear magnetic resonance (TD-NMR). The reaction was performed in an aqueous solution containing HCl (1 mol L-1), where Cu2+ ions were the corrosion products. A benchtop NMR spectrometer was used to monitor the reaction through the correlation between the transverse relaxation times (T2), acquired with the CPMG pulse sequence, and the concentration of Cu2+ in the solution. The reactions were studied using copper plaques and cylinders in the presence and absence of a magnetic field and in the presence and absence of an applied potential. These experiments were performed to study the effect of the magnetic forces which affect reactions with and without an applied potential. The coupling experiments between TD-NMR and electrochemistry (EC-NMR) were performed using a copper plaque as a working electrode, a platinum wire in a spiral shape as a counter electrode and a Ag/AgCl KCl 3 mol L-1 reference electrode. Experiments in which no potential was applied were performed by inserting the copper sample in an HCl aqueous solution. Results showed that the magnetic field didn’t alter the corrosion process when a 1V potential was applied but it did inhibit the corrosion of copper when no potential was applied. These results lead to the hypothesis that, in the reaction with an applied potential, the Lorentz force was minimized by the forces created by the magnetic field and the concentration gradient of the paramagnetic species (Cu2+). In the case of corrosion experiments without an applied potential a possibility is that the forces created by the concentration gradient force copper ions to stay on the interface copper/solution, which hinders the reaction. The effect of the magnetic field on the surface of the copper cylinder at the end of the corrosion process was also analysed by scanning electron microscopy and atomic force microscopy while the concentration of Cu2+ in the solution was measured by UV-vis spectroscopy and flame atomic absorption spectrometry.
Curbo, Jason Wayne. "A preliminary investigation of the effects of environmentally assisted cracking on natural gas transmission pipelines." Thesis, Texas A&M University, 2005. http://hdl.handle.net/1969.1/2357.
Повний текст джерелаHuang, Lei. "Investigation of Environmental Effects on Intrinsic and Galvanic Corrosion of Mild Steel Weldment." Ohio University / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1338567512.
Повний текст джерелаQiu, Ping. "Quantified In Situ Analysis of Initial Atmospheric Corrosion : Surface heterogeneity, galvanic effects and corrosion product distribution on zinc, brass and Galvalume." Doctoral thesis, KTH, Korrosionslära, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-34096.
Повний текст джерелаQC 20110607
Carvalho, Maria Leonor. "Corrosion of copper alloys in natural seawater : effects of hydrodynamics and pH." Thesis, Paris 6, 2014. http://www.theses.fr/2014PA066304/document.
Повний текст джерелаThis thesis was carried out in the frame of the BIOCOR ITN European project, in close collaboration with the industrial partner RSE S.p.A. (Italy). Copper alloys commonly used in cooling systems of power plants may be affected by biocorrosion induced by biofilm formation. The main objective of this work was to study the corrosion behavior of 70Cu-30Ni alloy and aluminum brass in seawater environments, under real industrial conditions (field experiments) and in laboratory. The influence of different parameters, such as the solution (filtered natural seawater (FNSW) vs artificial seawater (ASW)), the concentration of biomolecules (biomolecules naturally present in seawater vs a model protein, the bovine serum albumin (BSA)), hydrodynamics (static conditions, under flow and stirring, rotating ring electrode (RRE)) and pH (8.0, 6.0 and 3.7), was evaluated. In field, the overall corrosion behavior and antifouling treatments were monitored using electrochemical (corrosion potential Ecorr vs time, LPR), gravimetric (weight losses) and genetic techniques. In lab, electrochemical measurements (Ecorr vs time, polarization curves, EIS), performed during the very first steps of oxide layers formation (1 h immersion time), were combined to surface analysis by XPS and ToF-SIMS. From field experiments, microbiological and molecular analysis of biofilms formed on both copper alloys in natural seawater indicates the presence of Marinobacter, Alteromonas and Pseudomonas bacterial species. From lab experiments, models are proposed to analyze impedance data obtained at Ecorr. In the case of 70Cu-30Ni, the HF loop illustrates mainly the anodic charge transfer (diameter equal to Rta); whereas the LF loop is related to the anodic mass transport and partial blocking effect by CuCl. In the case of Al brass, the single experimental loop illustrates both anodic charge transfer and anodic mass transport. Similar electrochemical behavior and surface chemical composition of 70Cu-30Ni alloy are obtained in static ASW and FNSW, due to the low biomolecule concentration in FNSW. Compared to 70Cu-30Ni in static ASW without biomolecules, for which a thick duplex oxide layer (outer redeposited Cu2O layer and inner oxidized nickel layer) is shown, the presence of BSA leads to a mixed Cu and Ni oxide layer with a lower thickness; the results also show a slow-down of the anodic reaction and a small corrosion inhibition effect in the presence of BSA. Under flow and stirring, a very thin mixed Cu and Ni oxide layer is obtained. For both alloys in FNSW, the corrosion current icorr estimated from Rta is independent of the rotation speed of the RRE, due to compensated potential and mass transport effects. For 70Cu-30Ni in static FNSW, the anodic reaction is slown down at acidic pH (kinetic effect). For Al brass, there is a corrosion inhibition effect at acidic pH, and the more acidic the pH, the slower the anodic reaction. In the case of 70Cu-30Ni alloy, the oxide layer thickness increases with decreasing pH, whereas for Al brass it is independent of the pH. The chemical composition of the oxide layer seems to have an effect on the amount of adsorbed proteins and the calculated organic layer equivalent thickness is very low (few Å for 70Cu-30Ni and 1 Å for Al brass)
Sapiro, David O. "The Effects of Alloy Chemistry on Localized Corrosion of Austenitic Stainless Steels." Thesis, Carnegie Mellon University, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10639516.
Повний текст джерелаThis study investigated localized corrosion behavior of austenitic stainless steels under stressed and unstressed conditions, as well as corrosion of metallic thin films. While austenitic stainless steels are widely used in corrosive environments, they are vulnerable to pitting and stress corrosion cracking (SCC), particularly in chloride-containing environments. The corrosion resistance of austenitic stainless steels is closely tied to the alloying elements chromium, nickel, and molybdenum. Polarization curves were measured for five commercially available austenitic stainless steels of varying chromium, nickel, and molybdenum content in 3.5 wt.% and 25 wt.% NaCl solutions. The alloys were also tested in tension at slow strain rates in air and in a chloride environment under different polarization conditions to explore the relationship between the extent of pitting corrosion and SCC over a range of alloy content and environment. The influence of alloy composition on corrosion resistance was found to be consistent with the pitting resistance equivalent number (PREN) under some conditions, but there were also conditions under which the model did not hold for certain commercial alloy compositions. Monotonic loading was used to generate SCC in in 300 series stainless steels, and it was possible to control the failure mode through adjusting environmental and polarization conditions. Metallic thin film systems of thickness 10-200 nm are being investigated for use as corrosion sensors and protective coatings, however the corrosion properties of ferrous thin films have not been widely studied. The effects of film thickness and substrate conductivity were examined using potentiodynamic polarization and scanning vibrating electrode technique (SVET) on iron thin films. Thicker films undergo more corrosion than thinner films in the same environment, though the corrosion mechanism is the same. Conductive substrates encourage general corrosion, similar to that of bulk iron, while insulating substrates supported only localized corrosion.
Williamson, Joanne. "The influence of concrete cover properties on the effects of reinforcement corrosion." Thesis, University of Birmingham, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.496284.
Повний текст джерелаChevrot, Thierry. "Pressure effects on the hot-salt stress-corrosion cracking of titanium alloys." Thesis, Cranfield University, 1994. http://dspace.lib.cranfield.ac.uk/handle/1826/7745.
Повний текст джерелаLi, Wei. "Mechanical Effects of Flow on CO2 Corrosion Inhibition of Carbon Steel Pipelines." Ohio University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1461751721.
Повний текст джерелаTheron, Gavin De Vos. "Effects of reinforcement corrosion on the structural performance of reinforced concrete beams." Master's thesis, University of Cape Town, 1994. http://hdl.handle.net/11427/18238.
Повний текст джерелаMhaede, Saad Mansour Hamed. "Corrosion performance of high strength aluminum alloys-effects of mechanical surface treatments." Clausthal-Zellerfeld Papierflieger, 2008. http://d-nb.info/996419667/04.
Повний текст джерелаGaydos, Peter Andrew. "The effects of load and humidity on friction and life of polymeric coatings used to prevent fretting corrosion." Thesis, Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/53123.
Повний текст джерелаMaster of Science
Hazzaa, M. I. "Synergistic effects in the inhibition by chromate-containing mixtures of the corrosion of mild steel." Thesis, University of Manchester, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.380533.
Повний текст джерелаKashyap, Anusha Venkitachalam. "Effects of water chemistry, temperature, gaseous cavitation & phosphate inhibitors on concrete corrosion." Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/35788.
Повний текст джерелаConcrete corrosion has serious societal and economic impacts and is an important concern in a utilityâ s overall corrosion control strategy. Though concrete based pipes and linings are only restricted to the distribution mains, they still make up a large percentage of the drinking water infrastructure at about 17% of its total length. An improved understanding of the corrosion mechanisms involved steps that can be taken to mitigate concrete corrosion are very important. This study examined the role of phosphate chemicals, water chemistry, temperature and gaseous cavitation on the degradation of cement-based pipes and linings. It also provides information for utilities to make informed decisions regarding the use, effectiveness, and application of phosphate corrosion inhibitors relative to concrete corrosion control.
Under low alkalinity and low pH conditions, considered to be highly aggressive in the literature, we noticed very substantial corrosion of concrete in laboratory experiments. At high pH and high alkalinity conditions, the buildup of scale (e.g., calcium carbonate) on the inside of the pipe is the major concern. The addition of phosphate inhibitors strongly influenced both concrete corrosion and scaling. At low alkalinity the addition of zinc orthophosphate or polyphosphate reduced corrosion of concrete. The addition of orthophosphate under low alkalinity conditions increased aluminum leaching and could push aluminum concentrations above the EPA SMCL threshold. At high alkalinity conditions the addition of orthophosphate is highly effective at reducing scaling, and aluminum leaching was not a concern.
The presence of high concentrations of magnesium and silicon could form magnesium aluminum oxyhydroxides and magnesium silicates which could act as a protective scale on the concrete surface. However, this precipitate forms only at pH values above 9.5. The effectiveness of this protective scale in reducing corrosion of concrete was not established unambiguously in this research. Temperature plays a key role in corrosion of concrete. Calcite solubility increases at lower temperatures however at higher temperatures corrosion of concrete increases, which implies that corrosion of concrete is not driven by calcite solubility. At higher alkalinities scaling of concrete is higher at lower temperatures. This indicates that calcite solubility controls scaling of concrete at higher alkalinities. Tests with gaseous cavitation indicate that corrosion of concrete does not increase in the presence of gaseous cavitation. Vaporous cavitation is more detrimental to concrete than gaseous cavitation.
Master of Science
Yang, Qi. "Effects of hydrogen on passivity and corrosion related behavior of austenitic stainless steels." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0010/NQ59701.pdf.
Повний текст джерелаGuo, Yanling [Verfasser]. "The Effects of Minor Constituents on Corrosion of Zirconia by Steel / Yanling Guo." Aachen : Shaker, 2005. http://d-nb.info/1186587954/34.
Повний текст джерелаWasserstrom, Lauren W. "Uptake of Lead by Iron Corrosion Scales: Effects of Iron Mineralogy and Orthophosphate." University of Cincinnati / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1396524188.
Повний текст джерелаCohen, Laura Jane Rachel. "Some effects of hydrogen on duplex stainless steels." Thesis, University of Cambridge, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.292256.
Повний текст джерелаPorr, William C. "Specimen size effects in slow strain-rate testing." Thesis, Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/53153.
Повний текст джерелаMaster of Science
Wang, Kai Yuan. "Effects of metallurgical variables on the cavitation erosion behaviour of wrought austenitic stainless steel." Thesis, University of Macau, 2017. http://umaclib3.umac.mo/record=b3691143.
Повний текст джерелаLi, Jing Hui. "Effects of metallurgical variables on the cavitation erosion behaviour of AISI 304 austenitic stainless steel." Thesis, University of Macau, 2017. http://umaclib3.umac.mo/record=b3691682.
Повний текст джерелаLim, Chwee-Teck. "Effects of compliance and friction on elastic-plastic impact." Thesis, University of Cambridge, 1996. https://www.repository.cam.ac.uk/handle/1810/273133.
Повний текст джерелаXie, Tieling. "Electrochemical corrosion effects of ethanol based fuel on general aviation aircraft fuel system components." Diss., Mississippi State : Mississippi State University, 2004. http://library.msstate.edu/etd/show.asp?etd=etd-11072004-122317.
Повний текст джерелаTalukdar, Sudip. "The effects of global climate change on carbonation induced corrosion of reinforced concrete structures." Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/44259.
Повний текст джерела