Добірка наукової літератури з теми "Cooling of coils"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Cooling of coils".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Cooling of coils"
Theerakulpisut, S., and S. Priprem. "Modeling cooling coils." International Communications in Heat and Mass Transfer 25, no. 1 (January 1998): 127–37. http://dx.doi.org/10.1016/s0735-1933(97)00144-9.
Повний текст джерелаLi, Haijun, Tianxiang Li, Chaofei Li, Zhaodong Wang, and Guodong Wang. "Improvement of Longitudinal Performance Uniformity of Hot-Rolled Coils for Cold-Rolled DP980 Steel." Metals 10, no. 3 (March 17, 2020): 382. http://dx.doi.org/10.3390/met10030382.
Повний текст джерелаMo, Chun Li, Qiang Li, Xu Ming Guo, and Hao Wang. "Numerical Simulation the Temperature Field of the Multi-Coil Batch during Annealing Process in Bell-Type Furnace." Advanced Materials Research 538-541 (June 2012): 637–41. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.637.
Повний текст джерелаSedlacek, Dieter, and Berenika Hausnerova. "Cooling Aluminium Coils by Outdoor Air." Manufacturing Technology 19, no. 5 (October 1, 2019): 848–54. http://dx.doi.org/10.21062/ujep/383.2019/a/1213-2489/mt/19/5/848.
Повний текст джерелаKotsubo, Vincent, and Robert D. Black. "5508613 Apparatus for cooling NMR coils." Magnetic Resonance Imaging 14, no. 9 (January 1996): XI. http://dx.doi.org/10.1016/s0730-725x(97)87363-8.
Повний текст джерелаMirth, David, and Satish Ramadhyani. "Performance of Chilled-Water Cooling Coils." HVAC&R Research 1, no. 2 (April 1, 1995): 160–71. http://dx.doi.org/10.1080/10789669.1995.10391316.
Повний текст джерелаGuo and Ye. "Numerical and Experimental Study on a High-Power Cold Achieving Process of a Coil-Plate Ice-Storage System." Energies 12, no. 21 (October 25, 2019): 4085. http://dx.doi.org/10.3390/en12214085.
Повний текст джерелаKanimozhi, B., Amit Tanaji Shinde, Ashutosh Kumar, and Alok Kumar. "Formation of Bio-Fuel from Waste Plastic Scrap." Applied Mechanics and Materials 766-767 (June 2015): 551–56. http://dx.doi.org/10.4028/www.scientific.net/amm.766-767.551.
Повний текст джерелаMei, V. C. "Heat Pump Ground Coil Analysis With Thermal Interference." Journal of Solar Energy Engineering 110, no. 2 (May 1, 1988): 67–73. http://dx.doi.org/10.1115/1.3268247.
Повний текст джерелаBROWN, DAVID A., and YOUNG L. BAE. "Titanium Cooling Coils for Surface Ship Applications." Naval Engineers Journal 102, no. 3 (May 1990): 162–71. http://dx.doi.org/10.1111/j.1559-3584.1990.tb02642.x.
Повний текст джерелаДисертації з теми "Cooling of coils"
Silveira, Ronan Gobbi da. "Análise térmica de sistema de refrigeração direta em fermentadores cilindrocônicos /." Bauru : [s.n], 2009. http://hdl.handle.net/11449/91713.
Повний текст джерелаBanca: Augusto Ronchi Junior
Banca: Waldemar Gastoni Venturini Filho
Resumo: A fermentação alcólica, processo central da indústria cervejeira é um processo que libera uma grande quantidade de calor. Sendo assim, os recipientes de fermentação devem estar equipados com instalações de refrigeração para o correto controle da temperatura. A presente pesquisa tem como objetivo a análise da troca de calor de fermentadores cilindrocônicos dotados de sistema de refrigeração direta através de serpentina meia-cana. Para a consecução desse objetivo foi necessária a elaboração de um roteiro de cálculo seguro baseado em equações e experiências encontradas em renomadas literaturas. A análise dos resultados encontrados foi realizada a partir dos valores obtidos através do programa de cálculo atualmente utilizado em uma das maiores empresas fornecedoras deste tipo de equipamento para o mercado cervejeiro, a Dedini Indústrias de Base. Constatou-se que os valores obtidos pelo roteiro apresentado na presente dissertação foram maiores do que os calculados no programa, concluindo-se que as diferenças e dificuldades de resfriamento encontradas em equipamentos semelhantes fornecidos a clientes distintos podem ter origem na quantidade de refrigerante. As estimativas para o coeficiente global de transferência de calor independem do roteiro de cálculo seguido, pois há uma variação máxima de 3,5 % nos resultados para o cálculo deste. O mesmo é verificado para as vazões mássicas de amônia requerida, onde esta variação é ainda menor (cerca de 3,0%)
Abstract: Alcoholic fermentation, brewery industry's central process that liberates a great amount of heat. Therefore, the fermentation containers should be equipped with cooling installations for correct temperature control. The present research aims to analyze the heat exchange in cylindroconical fermenters endowed with a halp-pipe coil direct cooling system. To achieve this objective, the elaboration of a sate calculation route based on equations and experiences found in renowned references was necessary. The validation of the results was accomplished from the values obtained through the calculation program now used in one the largest supplying companies of this kind of equipment for the brewer market, Dedini indústrias de Base. It was verified that the flow of ammonia for the cooling system obtained by the itinerary introduced in the present article was larger than the one calculated in the program, and it can be concluded that the differences and cooling difficulties found in similar equipments supplied to different customers can have origin in the amount of ammonia used in the cooling system. The values for the overal heat transfer coefficient do not depend on the calculation itinerary followed, because there is a maximum variation of 3.5% in the results for the calculation of the coeffiecient. The same is verified for the mass flows of requested ammonia, where this variation is still smaller (about 3.0%)
Mestre
Silveira, Ronan Gobbi da [UNESP]. "Análise térmica de sistema de refrigeração direta em fermentadores cilindrocônicos." Universidade Estadual Paulista (UNESP), 2009. http://hdl.handle.net/11449/91713.
Повний текст джерелаCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
A fermentação alcólica, processo central da indústria cervejeira é um processo que libera uma grande quantidade de calor. Sendo assim, os recipientes de fermentação devem estar equipados com instalações de refrigeração para o correto controle da temperatura. A presente pesquisa tem como objetivo a análise da troca de calor de fermentadores cilindrocônicos dotados de sistema de refrigeração direta através de serpentina meia-cana. Para a consecução desse objetivo foi necessária a elaboração de um roteiro de cálculo seguro baseado em equações e experiências encontradas em renomadas literaturas. A análise dos resultados encontrados foi realizada a partir dos valores obtidos através do programa de cálculo atualmente utilizado em uma das maiores empresas fornecedoras deste tipo de equipamento para o mercado cervejeiro, a Dedini Indústrias de Base. Constatou-se que os valores obtidos pelo roteiro apresentado na presente dissertação foram maiores do que os calculados no programa, concluindo-se que as diferenças e dificuldades de resfriamento encontradas em equipamentos semelhantes fornecidos a clientes distintos podem ter origem na quantidade de refrigerante. As estimativas para o coeficiente global de transferência de calor independem do roteiro de cálculo seguido, pois há uma variação máxima de 3,5 % nos resultados para o cálculo deste. O mesmo é verificado para as vazões mássicas de amônia requerida, onde esta variação é ainda menor (cerca de 3,0%)
Alcoholic fermentation, brewery industry's central process that liberates a great amount of heat. Therefore, the fermentation containers should be equipped with cooling installations for correct temperature control. The present research aims to analyze the heat exchange in cylindroconical fermenters endowed with a halp-pipe coil direct cooling system. To achieve this objective, the elaboration of a sate calculation route based on equations and experiences found in renowned references was necessary. The validation of the results was accomplished from the values obtained through the calculation program now used in one the largest supplying companies of this kind of equipment for the brewer market, Dedini indústrias de Base. It was verified that the flow of ammonia for the cooling system obtained by the itinerary introduced in the present article was larger than the one calculated in the program, and it can be concluded that the differences and cooling difficulties found in similar equipments supplied to different customers can have origin in the amount of ammonia used in the cooling system. The values for the overal heat transfer coefficient do not depend on the calculation itinerary followed, because there is a maximum variation of 3.5% in the results for the calculation of the coeffiecient. The same is verified for the mass flows of requested ammonia, where this variation is still smaller (about 3.0%)
Korolija, Ivan. "Heating, ventilating and air-conditioning system energy demand coupling with building loads for office buildings." Thesis, De Montfort University, 2011. http://hdl.handle.net/2086/5501.
Повний текст джерелаKojima, Hiroki, Xin Chen, Naoki Hayakawa, Fumihiro Endo, and Hitoshi Okubo. "Dynamic Thermal Characteristics of HTS Coil for Conduction-Cooled SMES." IEEE, 2009. http://hdl.handle.net/2237/13940.
Повний текст джерела葉啓明 and Kai-ming Ip. "Dynamic response of a cooling and dehumidifying coil to variations in air flow rate." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1997. http://hub.hku.hk/bib/B31215361.
Повний текст джерелаDeng, Shi-Ming. "Modelling and control of an air conditioning system with emphasis on cooling coil behaviour." Thesis, London South Bank University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303912.
Повний текст джерелаIp, Kai-ming. "Dynamic response of a cooling and dehumidifying coil to variations in air flow rate /." Hong Kong : University of Hong Kong, 1997. http://sunzi.lib.hku.hk/hkuto/record.jsp?B19832369.
Повний текст джерелаVašulka, Tomáš. "Studie chladicího systému budovy s ohledem na klimatickou změnu v ČR." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442847.
Повний текст джерелаUnger, Oskar. "Fjärrkyla i Sundsvall : Optimering av framledningskurva för akviferbaserad fjärrkyla." Thesis, Mittuniversitetet, Institutionen för kemiteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-36587.
Повний текст джерелаOn behalf of Sundsvall Energi AB, FVB Sverige AB has initiated a preliminary study on the establishment of a district cooling system in Sundsvall. The main source for the cooling will be cool water drawn from the aquifer and a compressor chiller. The main purpose of this project has both been to provide the optimal supply temperature of the cooling network at different outdoor temperatures, and to find out to what extent the cool water from the aquifer can be used by itself as the cooling source. The project was initially focused on examining the climate and cooling demand in Sundsvall. The cooling demand was examined on the basis of six existing buildings that uses freshwater district cooling, and different types of climatesystems were then examined to ascertain what their requirements for the supply temperature are. Cooling coil batteries were found to be the component that requires the lowest supply temperature; therefore, the cooling power calculations were relied on them. The outcome of the cooling coil battery calculations was presumed to correspond to the cooling power of the network itself. By comparing the cooling power of the coil batteries at different supply temperatures and the cooling demand at different outdoor temperatures the main supply temperature for the district cooling network took shape. The aquifer is expected to maintain a temperature of approximately 7°C to 9°C, but in this project the temperature is set to exactly 9°C. On those premises the supply temperature of the cooling network could be set to 11°C for most of the year, but with a reduction of the supply temperature at outdoor temperatures around 21°C. Subsequently the supply temperature is reduced to 6°C at the outdoor temperature 25°C. Via the supply temperature curve, the aquifer cooling coverage ratio could be assessed. The result shows that if the supply temperature is raised between 0,5°C and 1,0°C in the distribution network the compressor chiller will have to be in operation for 159 hours per year. If instead the supply temperature is raised 1,5°C or 2,0°C, the compressor chiller must be in operation for 233 hours and 325 hours, respectively. In summary, all the goals and targets of the project have been completed.
Rakkimuthu, Sathyaprabha. "Improved Thermoregulation Of Brain Temperature Using Phase Change Material-Mediated Head Cooling System." University of Cincinnati / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1613750048541054.
Повний текст джерелаКниги з теми "Cooling of coils"
American Society of Heating, Refrigerating and Air-Conditioning Engineers. Method of testing forced circulation air cooling and air heating coils. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., 2000.
Знайти повний текст джерелаEpstein, Charles M. TMS stimulation coils. Edited by Charles M. Epstein, Eric M. Wassermann, and Ulf Ziemann. Oxford University Press, 2012. http://dx.doi.org/10.1093/oxfordhb/9780198568926.013.0004.
Повний текст джерела"Astromag" coil cooling study. Madsion, Wis: Applied Superconductivity Center, University of Wiscosin-Madsion, 1990.
Знайти повний текст джерелаW, Van Sciver Steven, and Goddard Space Flight Center, eds. "Astromag" coil cooling study. Madsion, Wis: Applied Superconductivity Center, University of Wiscosin-Madsion, 1990.
Знайти повний текст джерелаParker, Philip M. The 2007-2012 World Outlook for Air Conditioning-And Refrigeration-Type Central System Volatile Refrigerant Cooling Finned Coils. ICON Group International, Inc., 2006.
Знайти повний текст джерелаThe 2006-2011 World Outlook for Air Conditioning-And Refrigeration-Type Central System Volatile Refrigerant Cooling Finned Coils. Icon Group International, Inc., 2005.
Знайти повний текст джерелаMethod of Testing Forced Circulation Air Cooling and Air Heating Coils (A S H R a E Standards, 33-2000). Amer Society of Heating, 2000.
Знайти повний текст джерелаParker, Philip M. The 2007-2012 World Outlook for Air Conditioning-And Refrigeration-Type Central System Standard Water Cooling and Heating and Cleanable Tube Water Finned Coils. ICON Group International, Inc., 2006.
Знайти повний текст джерелаThe 2006-2011 World Outlook for Air Conditioning-And Refrigeration-Type Central System Standard Water Cooling and Heating and Cleanable Tube Water Finned Coils. Icon Group International, Inc., 2005.
Знайти повний текст джерелаZinn, S., and S. L. Semiatin. Elements of Induction Heating. ASM International, 1988. http://dx.doi.org/10.31399/asm.tb.eihdca.9781627083416.
Повний текст джерелаЧастини книг з теми "Cooling of coils"
Vakiloroaya, Vahid, and Jafar Madadnia. "Cooling Coil Design Improvement for HVAC Energy Savings and Comfort Enhancement." In Sustainability in Energy and Buildings, 965–74. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36645-1_85.
Повний текст джерелаHerd, K. G., R. A. Ackermann, and P. S. Thompson. "A Gaseous-Helium Cooling System for a High-Tc Superconducting Coil." In Advances in Cryogenic Engineering, 277–81. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4757-9047-4_32.
Повний текст джерелаLvovsky, Yury M., Gary W. Neeley, Wei Tong, Kenneth E. Grut, and Timothy A. Antaya. "Effect of Incorporating Cooling Channels into the Coil Support Structure of the TPX Toroidal Field Magnet." In A Cryogenic Engineering Conference Publication, 449–56. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0373-2_58.
Повний текст джерела"Heat Exchangers and Cooling Coils." In Principles of Heating, Ventilation and Air Conditioning with Worked Examples, 265–338. WORLD SCIENTIFIC, 2015. http://dx.doi.org/10.1142/9789814667777_0007.
Повний текст джерелаKhamis, M., and M. Hassab. "Thermal Design of Cooling and Dehumidifying Coils." In Heat Exchangers - Basics Design Applications. InTech, 2012. http://dx.doi.org/10.5772/32536.
Повний текст джерела"Leaks in Copper Tubing From Cooling Coils of a Large Air-Conditioning Unit." In Handbook of Case Histories in Failure Analysis, 204–6. ASM International, 1993. http://dx.doi.org/10.31399/asm.fach.v02.c9001338.
Повний текст джерелаZahn, G. R., J. L. Duchateau, W. H. Fietz, B. Gravil, R. Heller, F. Millet, S. Nicollet, and P. Chesny. "Design of a Cooling System for the Cold Test of the Iter TF Coils before Installation." In Proceedings of the Twentieth International Cryogenic Engineering Conference (ICEC20), 87–90. Elsevier, 2005. http://dx.doi.org/10.1016/b978-008044559-5/50021-1.
Повний текст джерела"Auxiliary Equipment for Induction Heating." In Elements of Induction Heating, 77–84. ASM International, 1988. http://dx.doi.org/10.31399/asm.tb.eihdca.t65220077.
Повний текст джерела"Multiobjective Programming for Waste Heat Recovery of an Industrial Gas Turbine." In Multi-Objective Optimization of Industrial Power Generation Systems, 110–47. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-1710-9.ch003.
Повний текст джерелаSanada, Y., T. Hamajima, M. Shibui, M. Naganuma, M. Shimada, O. Osaki, T. Fujioka, et al. "DEVELOPMENT OF A FORCED-COOLING CABLE-IN-CONDUIT SUPERCONDUCTING COIL (DPC-TJ)." In Proceedings of the Twelfth International Cryogenic Engineering Conference Southampton, UK, 12–15 July 1988, 789–93. Elsevier, 1988. http://dx.doi.org/10.1016/b978-0-408-01259-1.50152-2.
Повний текст джерелаТези доповідей конференцій з теми "Cooling of coils"
Smith, Graham D. J. "Theoretical Modeling for Impingement Cooling of Large Scale Coils of Aluminium." In ASME 2009 Heat Transfer Summer Conference collocated with the InterPACK09 and 3rd Energy Sustainability Conferences. ASMEDC, 2009. http://dx.doi.org/10.1115/ht2009-88161.
Повний текст джерелаGu, Yongjian. "Analysis of Air Cooling and Dehumidification Process Through Cooling Coils." In 5-6th Thermal and Fluids Engineering Conference (TFEC). Connecticut: Begellhouse, 2021. http://dx.doi.org/10.1615/tfec2021.edu.036169.
Повний текст джерелаArora, C. P., and P. V. Ramachandran. "COMPUTER - AIDED DESIGN OF DIRECT EXPANSION COOLING COILS." In International Heat Transfer Conference 8. Connecticut: Begellhouse, 1986. http://dx.doi.org/10.1615/ihtc8.4550.
Повний текст джерелаHamaguchi, S., S. Imagawa, T. Obana, N. Yanagi, S. Moriuchi, H. Sekiguchi, K. Oba, et al. "PERFORMANCE OF UPGRADED COOLING SYSTEM FOR LHD HELICAL COILS." In ADVANCES IN CRYOGENIC ENGINEERING: Transactions of the Cryogenic Engineering Conference - CEC, Vol. 52. AIP, 2008. http://dx.doi.org/10.1063/1.2908543.
Повний текст джерелаWornyoh, E. Y. A., D. K. Patel, and L. D. Schuessler. "An In Situ Mechanism for the Optimal Cooling of Oil-Lubricated Rolling Element Bearings and Planetary Gear Systems." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64614.
Повний текст джерелаYu, Hao, Xingliang Zhang, Wei Zhang, and Guofeng Hao. "The Airflow Analysis for CAP1400 Control Rod Drive Mechanisms Cooling System." In 2017 25th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/icone25-66192.
Повний текст джерелаTun, Maung Naing Naing, and Nilufer Egrican. "FRTCOILS: A General Purpose Simulation Software for Design and Prediction of Thermal and Hydraulic Performance of Finned-Tube Compact Heat Exchangers." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-41409.
Повний текст джерелаZamzam, Montaser M., and Abdalla M. Al-Amiri. "A Novel Free-Cooling Scheme for Combustion Turbine Inlet Air Cooling." In ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-27621.
Повний текст джерелаLiu, Li, and Xiangdong Wang. "Robust controller design for regulating outlet air temperature of cooling coils." In 2016 Chinese Control and Decision Conference (CCDC). IEEE, 2016. http://dx.doi.org/10.1109/ccdc.2016.7531049.
Повний текст джерелаSmith, Elliot, Fabio Freschi, Maurizio Repetto, and Stuart Crozier. "Synthesis of the cooling pathways optimal layout for MRI gradient coils." In 2016 IEEE Conference on Electromagnetic Field Computation (CEFC). IEEE, 2016. http://dx.doi.org/10.1109/cefc.2016.7816260.
Повний текст джерелаЗвіти організацій з теми "Cooling of coils"
Shirey, III, Don B. TEST PLAN FOR MONITORING COOLING COILS IN A LABORATORY SETTING. Office of Scientific and Technical Information (OSTI), April 2002. http://dx.doi.org/10.2172/794172.
Повний текст джерелаWiersma, B. J. Measurement of the ductile to brittle transition temperature for waste tank cooling coils. Office of Scientific and Technical Information (OSTI), September 1992. http://dx.doi.org/10.2172/10138772.
Повний текст джерелаMickalonis, J. I. Evaluation of Cargo Leak Seal Product for use in Tank 30 Cooling Coils. Office of Scientific and Technical Information (OSTI), June 2001. http://dx.doi.org/10.2172/781736.
Повний текст джерелаWiersma, B. J. Measurement of the ductile to brittle transition temperature for waste tank cooling coils. Office of Scientific and Technical Information (OSTI), September 1992. http://dx.doi.org/10.2172/6893714.
Повний текст джерелаHansen, E., and A. Alex Cozzi. CLOSURE OF HLW TANKS PHASE 2 FULL SCALE COOLING COILS GROUT FILL DEMONSTATIONS. Office of Scientific and Technical Information (OSTI), June 2008. http://dx.doi.org/10.2172/933166.
Повний текст джерелаDworjanyn, L. O. Waste Tank cooling coil leakage calculations. Office of Scientific and Technical Information (OSTI), December 1991. http://dx.doi.org/10.2172/10106343.
Повний текст джерелаDworjanyn, L. O. Waste Tank cooling coil leakage calculations. Office of Scientific and Technical Information (OSTI), December 1991. http://dx.doi.org/10.2172/6745393.
Повний текст джерелаHsu, T. C. Replacement inhibitors for tank farm cooling coil systems. Office of Scientific and Technical Information (OSTI), March 1995. http://dx.doi.org/10.2172/106444.
Повний текст джерелаHarbour, J., V. Vickie Williams, and E. Erich Hansen. CLOSURE OF HLW TANKS FORMULATION FOR A COOLING COIL GROUT. Office of Scientific and Technical Information (OSTI), May 2008. http://dx.doi.org/10.2172/934522.
Повний текст джерелаJohnson, K. I., O. D. Mullen, M. R. Powell, D. S. Daly, and D. W. Engel. Development and testing of the cooling coil cleaning end effector. Office of Scientific and Technical Information (OSTI), September 1997. http://dx.doi.org/10.2172/650177.
Повний текст джерела