Добірка наукової літератури з теми "Cooling energy need"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Cooling energy need".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Cooling energy need"
Jurík, Dušan, and Ivan Chmúrny. "Influence of Facade Colour on Yearly Energy Need." Advanced Materials Research 855 (December 2013): 57–61. http://dx.doi.org/10.4028/www.scientific.net/amr.855.57.
Повний текст джерелаChmúrny, Ivan. "Influence of External Surface Resistance and Thermal Insulation Level on Energy Need for Cooling." Applied Mechanics and Materials 824 (January 2016): 445–52. http://dx.doi.org/10.4028/www.scientific.net/amm.824.445.
Повний текст джерелаChiesa, Giacomo, Andrea Acquaviva, Mario Grosso, Lorenzo Bottaccioli, Maurizio Floridia, Edoardo Pristeri, and Edoardo Sanna. "Parametric Optimization of Window-to-Wall Ratio for Passive Buildings Adopting A Scripting Methodology to Dynamic-Energy Simulation." Sustainability 11, no. 11 (May 31, 2019): 3078. http://dx.doi.org/10.3390/su11113078.
Повний текст джерелаCharani Shandiz, Saeid, Alice Denarie, Gabriele Cassetti, Marco Calderoni, Antoine Frein, and Mario Motta. "A Simplified Methodology for Existing Tertiary Buildings’ Cooling Energy Need Estimation at District Level: A Feasibility Study of a District Cooling System in Marrakech." Energies 12, no. 5 (March 12, 2019): 944. http://dx.doi.org/10.3390/en12050944.
Повний текст джерелаHuttunen, Jari, Olli Salmela, Topi Volkov, and Eva Pongrácz. "Reducing the Cooling Energy Consumption of Telecom Sites by Liquid Cooling." Proceedings 58, no. 1 (September 11, 2020): 19. http://dx.doi.org/10.3390/wef-06908.
Повний текст джерелаParoutoglou, Evdoxia, Alireza Afshari, Niels Chr Bergsøe, Peter Fojan, and Göran Hultmark. "A PCM based cooling system for office buildings: a state of the art review." E3S Web of Conferences 111 (2019): 01026. http://dx.doi.org/10.1051/e3sconf/201911101026.
Повний текст джерелаBurd, S. W., and T. W. Simon. "Turbulence Spectra and Length Scales Measured in Film Coolant Flows Emerging From Discrete Holes." Journal of Turbomachinery 121, no. 3 (July 1, 1999): 551–57. http://dx.doi.org/10.1115/1.2841350.
Повний текст джерелаHightower, Mike. "Energy Meets Water." Mechanical Engineering 133, no. 07 (July 1, 2011): 34–39. http://dx.doi.org/10.1115/1.2011-jul-2.
Повний текст джерелаPapatsounis, Adamantios G., Pantelis N. Botsaris, and Stefanos Katsavounis. "Thermal/Cooling Energy on Local Energy Communities: A Critical Review." Energies 15, no. 3 (February 2, 2022): 1117. http://dx.doi.org/10.3390/en15031117.
Повний текст джерелаKelliher, Warren C., and W. Gene Maddox. "X-Ray Fluorescence Analysis of Alloy and Stainless Steels Using a Mercuric Iodide Detector*." Advances in X-ray Analysis 31 (1987): 439–44. http://dx.doi.org/10.1154/s0376030800022278.
Повний текст джерелаДисертації з теми "Cooling energy need"
TONIOLO, JACOPO. "Physical Inspection metering and evaluation of HVAC systems efficiency in tertiary buildings." Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2574739.
Повний текст джерелаAntonucci, Domenico Fernando. "Il metodo di calcolo quasi-stazionario del fabbisogno energetico di raffrescamento in Italia." Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3423416.
Повний текст джерелаLe norme nazionali vigenti per la determinazione della prestazione energetica degli edifici, sono le quattro parti della serie delle UNI TS 11300, che forniscono le procedure di calcolo per la determinazione dell’energia termica e primaria e per l’utilizzo delle energie rinnovabili per la climatizzazione estiva ed invernale, nonché per la produzione di acqua calda sanitaria. Nella UNI TS 11300-1:2008. “Prestazioni energetiche degli edifici - Parte 1: Determinazione del fabbisogno di energia termica per la climatizzazione estiva ed invernale”, e nel documento CTI 010200043. DRAFT , “Revisione della specifica tecnica UNI/TS 11300-1”, del 20/03/2012, il calcolo del fabbisogno di energia termica in modalità di raffrescamento, viene effettuato mediante il metodo mensile quasi-stazionario, in cui il fattore di utilizzazione delle dispersioni, consente di tenere conto degli effetti dinamici. La letteratura che riguarda la prestazione energetica degli edifici, annovera tra gli ultimi lavori, numerosi scritti inerenti il confronto dei metodi di simulazione dinamica, ed altrettanti elaborati che mirano a verificare le ipotesi fondamentali dei metodi semplificati per la determinazione del fabbisogno di energia termica in modalità di raffrescamento. Nel presente lavoro, una esposizione classica delle teorie e degli studi che si sono avvicendati, si trova nel capitolo IV. Contemporaneamente, ha avuto un notevole impulso la Building simulation, di cui si sono evidenziati ( capitolo V ) i fondamenti e la modellazione energetica dell’ambiente confinato mediante il bilancio sull’aria, di massa e di energia, indicando i termini e le equazioni fondamentali. L’ ambito specifico di riferimento è quello delle procedure di validazione, nel senso e nei termini del capitolo VII, del metodo di calcolo mensile del fabbisogno termico per raffrescamento, attraverso il fattore di utilizzazione delle dispersioni. Partendo dall’analisi dei valori calcolati con il software adottato nelle linee guida per la certificazione energetica degli edifici sul territorio nazionale, e analizzando in dettaglio la procedura di calcolo delle norme nazionali ed europee ai fini della determinazione del fabbisogno di energia termica per il raffrescamento, nonché il significato e la determinazione dei parametri dinamici, ci si é inseriti nel solco della validazione, andando a valutare le effettive condizioni di temperatura interna, che sono alla base del significato attribuito al fattore di utilizzazione delle dispersioni per il calcolo dell’energia termica, che é necessaria per mantenere all’interno di una zona termica delle prefissate condizioni di temperatura. La zona termica considerata nelle simulazioni è quella della UNI EN 15265:2008, “Calcolo del fabbisogno di energia per il riscaldamento e il raffrescamento degli ambienti mediante metodi dinamici” , e le condizioni di prova sono il “Test 1” e il “Test 4” della medesima norma, che è stata adoperata nel procedimento di validazione del metodo mensile della UNI EN ISO 13790 : 2008, “Calcolo del fabbisogno di energia per il riscaldamento e il raffrescamento”. Le condizioni meteoclimatiche , sono quelle attualmente disponibili, fornite dal Comitato Termotecnico Italiano nella bozza della UNI 10349 : 2012, “ Riscaldamento e raffrescamento degli edifici. Dati climatici”, opportunamente elaborate con il codice TRNSYS ed ulteriormente sviluppate per renderle compatibili con il codice scelto per effettuare le simulazioni dinamiche , Energy Plus , perché si è rilevata una notevole differenza ( capitolo VI ) con i dati climatici forniti dal Ministero dell’ Energia statunitense ( Department of Energy , DOE ), che per l’ ITALIA sono sostanzialmente basati sui dati “ G. De Giorgio ”, con cui, finora, si conducono le simulazioni dinamiche. I risultati ottenuti, riguardo le condizioni di temperatura interna, non giustificano l’adozione del coefficiente di utilizzazione delle dispersioni, perché il valore di temperatura interna non presenta le variazioni che porterebbero a calcolare uno scambio termico superiore a quello che realmente si realizza, facendo riferimento al valore della temperatura di regolazione. Un alto aspetto importante, da tenere in considerazione nelle valutazioni energetiche di cui si tratta, è quello della congruenza dei dati climatici posti a base dei calcoli. A tal fine, utilizzando l’approccio “ black box ” , presente nella UNI EN ISO 13790: 2008, relativamente ai primi due calcoli in esso elencati, si sono confrontati i fabbisogni di energia termica in modalità di raffrescamento, per una zona termica di tipo residenziale, simulata nelle condizioni dei dati climatici “ G. De Giorgio” , e nelle condizioni, indicate come “ Anno tipo CTI “ , mettendo in evidenza le notevoli differenze riscontrate per ogni località e le particolarità osservate. I risultati ottenuti studiando la temperatura operativa, nel capitolo VII, hanno ulteriormente confermato l’idea di determinare e confrontare i vari termini che entrano nel bilancio termico mensile, per identificare le criticità e successivamente ricercare i parametri fondamentali su cui poter fare le elaborazioni necessarie per ottenere un adeguato accordo tra i valori di fabbisogno energetico ricavati con un metodo di simulazione dinamica e quelli ricavati con un metodo di calcolo stazionario o semi-stazionario. A tal proposito, per una zona termica di tipo residenziale, e per undici contesti meteo climatici nazionali, opportunamente scelti per rappresentare le usuali condizioni meteoclimatiche nazionali, si sono determinati i termini di scambio e i termini che derivano dagli apporti, calcolati con un metodo di simulazione dinamica, e con un metodo quasi stazionario, sul quale però non è stato possibile apportare le correzioni che impongono i nuovi dati climatici, ottenendo, pertanto, risultati di natura orientativa. Questi, comunque, rappresentano il primo passo nel campo della ricerca che si deve compiere, e che nelle simulazioni dinamiche, utilizza, i nuovi valori di temperatura esterna, umidità relativa, irradiazione e velocità del vento che sono stati elaborati per identificare l’anno tipo dei capoluoghi delle province nazionali. Un ulteriore aspetto importante è quello legato alla determinazione dei fabbisogni energetici per la valutazione degli edifici. Nel capitolo II si riporta il contributo fornito nell’ambito della revisione delle UNI TS 11300-1 e 11300-2, ( draft ) “Determinazione del fabbisogno di energia primaria e dei rendimenti per la climatizzazione invernale e per la produzione di acqua calda sanitaria, per la ventilazione e per l’illuminazione”, che ha messo in evidenza una modalità più corretta per la valutazione della quota parte di fabbisogno di energia primaria dovuta alla ventilazione, attraverso una appropriata valutazione del fabbisogno di energia termica.
Cortez, Ana Cristina da Silva. "Estratégias construtivas pasivas para a conceção de edifícios residenciais não dependentes de sistemas ativos de arrefecimento." Master's thesis, 2016. http://hdl.handle.net/1822/49581.
Повний текст джерелаOs edifícios são responsáveis por uma parte importante do consumo de energia em Portugal, sendo por isso necessário dar especial atenção às medidas de melhoramento da sua eficiência energética. As condições de conforto e bem-estar dos ocupantes são muitas vezes atingidas apenas com o recurso a sistemas mecânicos de climatização, tendo por isso o desempenho térmico dos edifícios de uma relevância significativa no consumo de energia dos edifícios. Devido às alterações climáticas, as temperaturas tendem a sofrer um significativo aumento, o que poderá corresponder a verões mais quentes e longos e consequentemente a maiores gastos de energia para arrefecimento ambiente. O presente estudo visa avaliar a influência de algumas medidas passivas de utilização corrente, tais como a variação do coeficiente de transmissão térmica na cobertura, paredes exteriores e pavimentos e a introdução e dimensionamento de elementos de sombreamento no desempenho energético dos edifícios na estação de arrefecimento, de forma a quantificar as necessidades energéticas de arrefecimento e procurar a eliminação das mesmas. O presente trabalho utiliza um mecanismo de avaliação dos riscos de sobreaquecimento existente do regulamento nacional relativo ao desempenho energético dos edifícios (REH), nomeadamente o fator de utilização de ganhos, que pode variar entre 0 e 1 no arrefecimento, e que toma o valor de 0 sempre que o fator de utilização de ganhos seja superior ao respetivo fator de referência. Esta situação representa as condições em que o risco de sobreaquecimento se encontra minimizado, sendo dispensável a utilização de sistemas ativos para arrefecimento. Posto isto, pretende-se indicar estratégias construtivas para as diferentes zonas climáticas para que seja possível identificar as medidas que maior potencial apresentam para a eliminação da energia de arrefecimento nos edifícios.
Buildings are responsible for an important part of the energy consumption in Portugal, therefore it is necessary to give special attention to energy efficiency improvements. The comfort conditions and welfare of the occupants, many times, are only fulfilled with resource to active systems, and because of that, the thermal performance of the buildings have a huge relevance in the building’s energy consumption. Due to climate changes, the temperatures tend to suffer a significant increase which will correspond to hotter and longer summers, and consequently to a bigger energy consumption for cooling purposes. The present study evaluates the influence of certain parameters such as the increase or decrease of the thermal transmission coefficient on the roof, external walls, pavement or the introduction and dimensioning of shading devices on the thermal performance of the buildings during the cooling season, quantifying the cooling energy needs and potential to eliminate the need of cooling active systems. The present work uses a mechanism for the evaluation of risks of the overheating that exists in the national regulation related to the energy performance of the buildings (REH), namely the gain usage factor which can vary between 0 and 1 in the cooling season, assuming the 0 value every time the gain usage factor is superior to the reference factor. This represents conditions in which the risk of overheating is minimized, making the use of active cooling systems unnecessary. Hereupon this, it is intended to indicate the constructive strategies for the different climate zones so that it is possible to identify the measures which present the higher potential for eliminating the building’s cooling energy.
Sousa, Liliana Armanda Cortês de. "Estudo paramétrico de otimização de sistemas de climatização para edifícios residenciais." Master's thesis, 2015. http://hdl.handle.net/10316/38690.
Повний текст джерелаAtualmente, o paradigma energético traduz-se num aumento constante da procura de energia elétrica e também por um constante aumento da fatura energética que leva a que se tornasse urgente a necessidade de adotar medidas eficazes para a redução destes custos, no sentido de promover a racionalização da energia e a utilização sustentável das diferentes formas de energia. Na Europa, os edifícios residenciais representam uma grande fatia da energia consumida, assim sendo, é nestes edifícios que se torna pertinente intervir. Por vezes, pequenas mudanças podem contribuir significativamente para o aumento da poupança e da eficiência energética. A implementação de sistemas de climatização, nos últimos anos, têm aumentado nos edifícios residenciais com o intuito de melhorar as condições de conforto térmico do edifício. Neste âmbito, a presente dissertação pretende estudar a influência de certos parâmetros na otimização de sistemas de climatização. O dimensionamento de sistemas de climatização é feito, regra geral e especialmente no setor residencial, de forma expedita, conduzindo a um sobredimensionamento dos sistemas. Neste sentido, é necessário ter um conhecimento mais próximo da realidade das potências de aquecimento e de arrefecimento a adquirir num determinado edifício residencial, reconhece-se a importância de ter ferramentas que permitam aos projetistas obter um dimensionamento mais realista e em tempo útil. Este estudo consiste na avaliação das potências de climatização que permitirá efetuar um dimensionamento adequado dos sistemas de climatização a instalar, verificando a influência da localização do edifício, a zona climática em que se insere, a sua orientação, a área de cada espaço a climatizar e as características construtivas do edifício. Para isso, foram elaboradas diversas simulações dinâmicas com o recurso ao programa EnergyPlus integrado no DesignBuilder, conjugando todos estes parâmetros em estudo
Currently, the energy paradigm is reflected in a steady increase in electricity demand and also by a steady increase in the energy bill that leads to become an urgent need to take effective measures to reduce these costs, in order to promote the rationalization energy and the sustainable use of different forms of energy. In Europe, residential buildings account for a large slice of energy consumed, therefore, it is in these buildings that is pertinent to intervene. Sometimes small changes can significantly contribute to increased savings and energy efficiency. Implementation of HVAC systems, in recent years, have increased in residential buildings in order to improve the thermal comfort of the building. In this context, the present work aims to study the influence of certain parameters in HVAC systems optimization. The HVAC system design is done generally and especially in the residential sector, expeditiously, leading to oversizing of the systems. Thus, it is necessary to have a closer knowledge of the reality of the heating and cooling powers to acquire on a particular residential building, it is recognized the importance of having tools that enable designers to get a more realistic and in good time. This study consists of the evaluation of HVAC powers that will allow make a proper sizing of HVAC systems to be installed by checking the influence of the building location, the climate zone in which it operates, its orientation, the area of each room to be conditioned and constructive characteristics of the building. For this, we have been prepared various dynamics simulations with the use of integrated EnergyPlus program DesignBuilder, combining all these parameters under study.
Книги з теми "Cooling energy need"
Office, General Accounting. Nuclear health and safety: Need for improved responsiveness to problems at DOE sites : report to congressional requesters. Washington, D.C: The Office, 1990.
Знайти повний текст джерелаOffice, General Accounting. Nuclear health and safety: Radiation exposures for some cloud-sampling personnel need to be reexamined : report to the chairman, Committee on Veterans Affairs, U.S. Senate. [Washington, D.C.]: GAO, 1987.
Знайти повний текст джерелаC, Landa Henry, and Landa Henry C, eds. The Solar energy handbook: A practical engineering approach to the application of solar energy to the needs of man and the environment : including sections on terrestrial cooling, wind power, calculations and computer programs. 6th ed. Wauwatosa, WI: Film Instruction Co. of America, 2005.
Знайти повний текст джерелаThe Solar energy handbook: A practical engineering approach to the application of solar energy to the needs of man and environment : including sections on terrestrial cooling & wind power, calculations and computer programs. 6th ed. Wauwatosa, WI: Film Instruction Company of America, 2006.
Знайти повний текст джерелаЧастини книг з теми "Cooling energy need"
Sethuramalingam, Ramamoorthy, and Abhishek Asthana. "Design Improvement of Water-Cooled Data Centres Using Computational Fluid Dynamics." In Springer Proceedings in Energy, 105–13. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-63916-7_14.
Повний текст джерелаAltevogt, H. G., and S. van Egmond. "Super Efficient Cooling Needs Effective Policies." In Energy Efficiency in Household Appliances, 523–29. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-60020-3_59.
Повний текст джерелаChiesa, Giacomo, Francesca Fasano, and Paolo Grasso. "Thermal Comfort and Climatic Potential of Ventilative Cooling in Italian Climates." In Innovative Renewable Energy, 423–49. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04714-5_18.
Повний текст джерелаTenente, Marcos, Carla Henriques, Álvaro Gomes, Patrícia Pereira da Silva, and António Trigo. "Multiple Impacts of Energy Efficiency Technologies in Portugal." In Springer Proceedings in Political Science and International Relations, 131–46. Cham: Springer Nature Switzerland, 2022. http://dx.doi.org/10.1007/978-3-031-18161-0_9.
Повний текст джерелаBoussafi, Abdellah, and Najat Ouaaline. "Assessment of Heating and Cooling Energy Needs in Residential Buildings in Settat, Morocco." In Internet of Everything and Big Data, 43–48. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003038412-5.
Повний текст джерелаFox, Michael H. "Nuclear Waste." In Why We Need Nuclear Power. Oxford University Press, 2014. http://dx.doi.org/10.1093/oso/9780199344574.003.0016.
Повний текст джерелаBiloria, Nimish, and Nastaran Abdollahzadeh. "Energy-Efficient Retrofit Measures to Achieve Nearly Zero Energy Buildings." In Zero-Energy Buildings [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.101845.
Повний текст джерелаChin, Jushan, and Jin Dang. "New Generation Aero Combustor." In Renewable Energy - Technologies and Applications. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.93916.
Повний текст джерелаMardamutu, Kanahavalli, Vasaki Ponnusamy, and Noor Zaman. "Green Energy in Data Centers." In Advances in Environmental Engineering and Green Technologies, 234–49. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-4666-9792-8.ch012.
Повний текст джерелаdel Ama Gonzalo, Fernando, Belen Moreno, Matthew Griffin, and Juan Antonio Hernandez Ramos. "Contribution of Water Flow Glazing to Net-Zero Energy Buildings." In Practice, Progress, and Proficiency in Sustainability, 21–48. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-7023-4.ch002.
Повний текст джерелаТези доповідей конференцій з теми "Cooling energy need"
Schmidt, Marvin, Andreas Schütze, and Stefan Seelecke. "Cooling Efficiencies of a NiTi-Based Cooling Process." In ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/smasis2013-3249.
Повний текст джерелаWong, Kaufui V., and James Johnston. "Cooling Systems for Power Plants in an Energy-Water Nexus Era." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64920.
Повний текст джерелаJochum, Michael, Gokulakrishnan Murugesan, Kelly Kissock, and Kevin Hallinan. "Low Exergy Heating and Cooling in Residential Buildings." In ASME 2011 5th International Conference on Energy Sustainability. ASMEDC, 2011. http://dx.doi.org/10.1115/es2011-54671.
Повний текст джерелаHeydari, Ali. "Thermodynamics Energy Efficiency Analysis and Thermal Modeling of Data Center Cooling Using Open and Closed-Loop Cooling Systems." In ASME 2007 InterPACK Conference collocated with the ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ipack2007-33848.
Повний текст джерелаSubbuswamy, Ganesh, Xianchang Li, and Kunal Gharat. "Numerical Study of Aerodynamic Performance of Film Cooling With Backward Injection Holes." In ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ht2013-17803.
Повний текст джерелаFa¨lt, Martin, and Ron Zevenhoven. "Radiative Cooling in Northern Europe Using a Roof Window." In ASME 2010 4th International Conference on Energy Sustainability. ASMEDC, 2010. http://dx.doi.org/10.1115/es2010-90192.
Повний текст джерелаZhang, Yili, Sean Kissick, and Hailei Wang. "Dynamic Modeling and Simulation of Home Cooling System With Supercooling-Based Ice Energy Storage." In ASME 2019 Power Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/power2019-1926.
Повний текст джерелаHanly, K., R. Grimes, and P. Walsh. "The Effects of Reynolds Number on the Aerodynamic Performance of Geometrically Similar Fans." In ASME 2008 Fluids Engineering Division Summer Meeting collocated with the Heat Transfer, Energy Sustainability, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/fedsm2008-55149.
Повний текст джерелаWhite, Thomas M. "A New Air Compressor Cooling System for the Pinellas County Resource Recovery Facility." In 12th Annual North American Waste-to-Energy Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/nawtec12-2220.
Повний текст джерелаRobinson, Brian S., and M. Keith Sharp. "Space Cooling Potentials for Ambient Energy Sources Across the US." In ASME 2011 5th International Conference on Energy Sustainability. ASMEDC, 2011. http://dx.doi.org/10.1115/es2011-54419.
Повний текст джерелаЗвіти організацій з теми "Cooling energy need"
Kim, Jeong Won, and Sungjin Kim. International Agreements and Global Initiatives for Low-Carbon Cooling. Asian Development Bank Institute, October 2022. http://dx.doi.org/10.56506/rpae4386.
Повний текст джерелаWagner, Anna, Jon Maakestad, Edward Yarmak, and Thomas Douglas. Artificial ground freezing using solar-powered thermosyphons. Engineer Research and Development Center (U.S.), November 2021. http://dx.doi.org/10.21079/11681/42421.
Повний текст джерелаJohra, Hicham. Performance overview of caloric heat pumps: magnetocaloric, elastocaloric, electrocaloric and barocaloric systems. Department of the Built Environment, Aalborg University, January 2022. http://dx.doi.org/10.54337/aau467469997.
Повний текст джерелаPullammanappallil, Pratap, Haim Kalman, and Jennifer Curtis. Investigation of particulate flow behavior in a continuous, high solids, leach-bed biogasification system. United States Department of Agriculture, January 2015. http://dx.doi.org/10.32747/2015.7600038.bard.
Повний текст джерела