Добірка наукової літератури з теми "Controlled rolling"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Controlled rolling".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Controlled rolling"
Kvackaj,, T., J. Zrnik,, V. Vrchovinsky,, and P. Wangyao,. "Controlled Rolling of Hastelloy-N." High Temperature Materials and Processes 21, no. 6 (April 2002): 351–60. http://dx.doi.org/10.1515/htmp.2002.21.6.351.
Повний текст джерелаLi, Zhuang, Di Wu, and Ming Fu Shao. "Controlled Rolling and Controlled Cooling Technology of Fe-C-Mn-Si Multiphase Steel." Applied Mechanics and Materials 377 (August 2013): 107–11. http://dx.doi.org/10.4028/www.scientific.net/amm.377.107.
Повний текст джерелаFeng, Guang Hong, Hong Liang Zhang, and Jian Wen Fan. "Numerical Simulation of Controlled Rolling of Thick Slab." Applied Mechanics and Materials 487 (January 2014): 522–26. http://dx.doi.org/10.4028/www.scientific.net/amm.487.522.
Повний текст джерелаMa, Jin Hong, Xiao Han Yao, Bin Tao, and Shuo Li. "Controlled Residual Stress Research of H-Beam." Advanced Materials Research 898 (February 2014): 237–40. http://dx.doi.org/10.4028/www.scientific.net/amr.898.237.
Повний текст джерелаXiong, Tao, Yi Xiao, Shi Sen Wang, Han Xiong Dong, and De Fa Li. "Effects of Controlled Rolling and Controlled Cooling on the Mechanical Properties of 550MPa Grade Engineering Mechanism Steel." Advanced Materials Research 602-604 (December 2012): 337–41. http://dx.doi.org/10.4028/www.scientific.net/amr.602-604.337.
Повний текст джерелаLi, Gui Yan, Bao Chun Zhao, Zao Fu Pang, Yong Hao Liu, and Hui Xia Ma. "Research on Simulating of Controlled Rolling and Controlled Cooling Process for Mo Micro-Alloy Steel." Materials Science Forum 575-578 (April 2008): 595–99. http://dx.doi.org/10.4028/www.scientific.net/msf.575-578.595.
Повний текст джерелаPussegoda, L. N., P. D. Hodgson, and J. J. Jonas. "Design of dynamic recrystallisation controlled rolling schedules for seamless tube rolling." Materials Science and Technology 8, no. 1 (January 1992): 63–71. http://dx.doi.org/10.1179/026708392790169821.
Повний текст джерелаHuo, Wen Feng, Xian Lei Hu, Bing Xing Wang, and Xiang Hua Liu. "Numerical Simulation of Intermediate Cooling Temperature Field in Controlled Rolling." Advanced Materials Research 148-149 (October 2010): 359–62. http://dx.doi.org/10.4028/www.scientific.net/amr.148-149.359.
Повний текст джерелаWang, Bing, Dong Dong Liu, Zhong Qi Dong, Yang Song, and Yan Jun Meng. "Controlled Rolling and Cooling Process of Spring Steel 65Mn." Applied Mechanics and Materials 713-715 (January 2015): 2624–26. http://dx.doi.org/10.4028/www.scientific.net/amm.713-715.2624.
Повний текст джерелаHaliyo, D. Sinan, Fabien Dionnet, and Stéphane Regnier. "Controlled rolling of microobjects for autonomous manipulation." Journal of Micromechatronics 3, no. 2 (June 1, 2006): 75–101. http://dx.doi.org/10.1163/156856306777544943.
Повний текст джерелаДисертації з теми "Controlled rolling"
Wang, Kai. "A study of HSLA steels microalloyed with vanadium and titanium during simulated controlled rollling [i.e. rolling] cycles." Thesis, University of Canterbury. Mechanical Engineering, 2003. http://hdl.handle.net/10092/7521.
Повний текст джерелаPatel, Jitendra Kumar. "The controlled hot-rolling of HSLA steels to optimise properties." Thesis, Swansea University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.547855.
Повний текст джерелаBozgeyikli, Evren C. "Introducing Rolling Axis Into Motion Controlled Gameplay As A New Degree Of Freedom Using Microsoft Kinect." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614606/index.pdf.
Повний текст джерелаVishal, Vaibhaw 1978. "Plastic buckling in gas transmission line-pipes, cold formed from thermo-mechanically-controlled rolling of low-allow steel plates." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/40359.
Повний текст джерелаIncludes bibliographical references (leaves 157-164).
The need for energy infrastructure has led to transportation of gases over long distances. The strength-grade of pipeline steels used for transportation of gases has been increasing to reduce the cost of the overall pipeline system. Along with higher strength, adequate fracture toughness and resistance to plastic buckling are required of pipes installed in earthquake- or frost-prone regions. To get higher strength with adequate deformability in low-alloy pipeline steels, plates for pipes are typically made today by thermo-mechanically-controlled rolling processes, which introduce strong crystallographic texture and anisotropy in the pipes. The plates are then cold-formed into pipes, which introduces further anisotropy and residual stresses in the pipe. In the current work, effects of various steps of the pipe manufacturing process, such as rolling, cold forming, etc., on residual stress, hardening moduli, plastic anisotropy, and eventually, to the buckling resistance of the pipe, are studied. Effects of various types of geometric perturbation on plastic buckling response of pipes are also studied.
(cont.) Due to the crystallographic texture and cold-forming, crystal plasticity-based constitutive models instead of Mises plasticity-based constitutive models may be better suited to model the pipe. In the current work, crystal plasticity-based material models are used to predict the buckling response of pipes. Results show that the buckling strain in uniaxial compression, predicted using a crystal plasticity-based model, is - 20% less than the one predicted using an "equivalent" Mises plasticity-based model, for a pipe with d/t ratio of 51. Further results show that variation in material properties and residual stresses caused by cold forming reduces the buckling strain by - 30%, for a pipe with d/t ratio of 51.
by Vaibhaw Vishal.
Ph.D.
Liu, Jingrong. "Design and Analysis of Intelligent Fuzzy Tension Controllers for Rolling Mills." Thesis, University of Waterloo, 2002. http://hdl.handle.net/10012/848.
Повний текст джерелаIngelstrand, Kristina, and Rebecka Klasson. "Business controllern : Digitaliseringens influenser på rollen." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-23991.
Повний текст джерелаDenna studie syftar till att undersöka och bedöma hur business controllerns roll och arbetsuppgifter influeras av digitaliseringen. Studien ska ge teoretiker och praktiker en större insikt kring vilka krav, kompetenser, erfarenheter, arbetsuppgifter och förväntningar som faller på controllern i en digital värld. Controllerns huvudsakliga arbetsuppgift är i grunden analys, kommunikation, rapportering, hantering av data samt prognostisering. Det finns potentiella hjälpmedel för att detta ska genomföras effektivt. Vi är mitt uppe i en digital revolution. Detta för med sig förändringar och det kräver viljan av anpassning och utveckling. För att lyckas driva en verksamhet krävs planering, strategi och kvalificerad personal. Det kräver att kunskap finns men också rätt förutsättningar på arbetsplatsen för att uträtta arbetet. I och med de analytiska och tekniska verktyg som idag finns tillgängliga, kan controllers bli en ovärderlig resurs om dessa kan bemästra verktygen och lära sig att tolka och förstå den information som IT-system kan tillgodose. Studien grundar sig på teori kring digitalisering, controllerns roll samt rollteori. Empiri har samlats in genom 50 platsannonser samt fem intervjuer. Genom granskning av empiri och teori samt en analys kring detta material kunde förståelse skapas kring hur controllerns roll och arbetsuppgifter influeras av digitalisering. Specifikt i vilken utsträckning controllern använder sig av digitala verktyg och vilken efterfrågan företag har på controllers digitala kompetenser och erfarenheter. Det ges även en insikt i vilken roll samt vilka förväntningar som faller på controllern i en digital värld. Slutsatsen av denna studie är att controllers använder sig av digitala verktyg i bred utsträckning. Vilket i sin tur ställer krav på digitala erfarenheter och kompetenser. Den digital revolutionen kan anses vara ett faktum vilket för med sig ett krav på att controllern ska beakta och följa med i den digitala utvecklingen och förändringen. I platsannonserna påvisas tydlig tendens att digital erfarenhet och kompetens är en stor del av det som efterfrågas från företag. Trotts den höga efterfrågan på digital kompetens visar granskningen av platsannonser att företag fortfarande enbart efterfrågar en person med ekonomisk utbildning. Rollen som controller har gått från att vara en “styrekonom” och revisor till att rollen nu befinner sig i ett gränsland mellan IT och ekonomi. Vilket för med sig att rollen nu kan anses vara något av en hybrid. Dock visar empirin i denna studie att detta ännu inte ses helt i praktiken.
Johannesson, Lisa, and Emma Persson. "Controllerrollen : en ökad förståelse för rollen inom stora svenska företag." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-14398.
Повний текст джерелаThe role of a controller has existed within organizations since the beginning of the 20thcentury, but it has developed substantially over time. The controller initially had an accountant role and now they have an increasingly business oriented and analytical function within business organizations. In the 1930s, this drastic change of function in the role occurred by the Controllers Institute of America (CIA), which resulted in the controller getting a more analytical role. Within companies in Sweden and across Europe, the controller concept developed in the 1970s. However, the role of a controller still lacks a clear definition and the content in the role varies substantially across different business organizations. There are also many different types of controllers, which increases the role variation. The objective of this study is to increase the knowledge of the role of a controller; by studying which tasks and expertises that are included in the profession, the differences between companies and whether there is a difference between how the controller himself/herself and the others within the organizations define the role of a controller. The study is conducted with a qualitative study with an abductive approach. The empirics are collected via semi structured interviews with both controllers and related roles. The study was conducted by means of ten interviews across five different companies, of which seven interviews with controllers and three interviews with related roles. The controllers were categorized as three different types of controllers based on their duties and responsibilities; the analysts with elements of accountants, the accountant with elements of analysts and the mix of analyst, educator and coach. A noticeable difference in the role was noted between companies depending on their size and how their reporting is designed, but no major differences depending on industry. Finally, we concluded that the interviewed controllers and the related individuals largely agreed on controller role content in general as well as within each respective company.
Wadström, Samuel, and Erik Engstrand. "Ekonomistyrning utan budget : Controllern och budgetering i kontrast till Beyond budgeting." Thesis, Linköpings universitet, Företagsekonomi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-166716.
Повний текст джерелаBackground: Conventional budgeting has endured a lot of criticism in the last decades as many argue it is not suitable for today's agile and globalized market. Several organizations have taken the step to abandon conventional budgeting and the movement, or philosophy, regarding this matter is known as Beyond Budgeting (BB). The core principle of this philosophy are an organizational structure where a higher degree of responsibility and trust is placed on the operative sections of the organization. By doing this a much higher degree of liberty is granted to partners in the organization, but it raises questions regarding agent theory and organizational control. The traditional role of the controller has been to function as a tool for upper management to exercise control and counteract the moral hazard of agency theory. The question then is how this role is affected by a much less strict form of control, and which factors can be seen to affect the role as well as which factors that have already affected it. Purpose: The purpose of the study is to examine the role of the controller and how budgeting of modern organizations are handled as well as how the accurate the critique aimed at budgeting is, as it is described by the philosophy of BB. Furthermore, the study aims to examine to which degree the subject organizations has implemented or embraced the principles of BB. Method: The study is built on semi-structured interviews with a total of six participants, based in several organizations, which have acted as the empirical data. This data has been transcribed and analyzed in accordance with the studies’ deductive approach upon which our studied theories have been applied. The analysis has been based on a thematic analysis where the goal has been to find common themes and categories. Conclusion: The study has found that controllers today have a high degree of control regarding how they choose to perform their work, which has been found to be primarily analytical and forward-looking in nature. Some of the controllers consider themselves to have a decision-making role, and while their work is primarily done alone, they have a wide array of contacts. The role can to a degree be described as a business partner, but the study has found large differences among participants in this regard. Among the participants it was most common to use a conventional budget, set by upper management where local business units have limited influence. This budget was complemented with forecasts. The study also found that among the participant’s organizations, some of the critique towards conventional budgeting was accurate to a certain degree. In addition, we found that aspects of BB had been implemented.
Wallin, Victor, and Niklas Wentzel. "Vem är controllern? : En kvalitativ studie om controllern i rollen som styrorienterad och traditionell ekonomichef." Thesis, Högskolan i Halmstad, Sektionen för ekonomi och teknik (SET), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-15501.
Повний текст джерелаAbstract There are many definitions of what the profession controller imply, which indicates that the profession is difficult to define. The purpose of this study is to describe the controller's job role in medium-sized manufacturing companies within the private sector and if the controller’s role focuses more on controlling-oriented tasks or more on traditional business tasks. Therefore we enunciated the following framing of question: Is today’s controller in manufacturing companies more controlling-oriented or more a traditional chief financial officer? We chose to conduct a qualitative study because it enables a deeper understanding and then we chose a deductive approach where we went from theory to empiricism. In our theoretical framework we described various characteristics, skills, roles and ways of working as part of the controller's profession. Our empirical study involved personal interviews with five controllers, which were supplemented by a survey where the respondents ranked their tasks in relation to time. The result shows that we can’t demonstrate that the controller works with more controlling-oriented tasks or more with traditional business tasks, but we believe that the controller works with both controlling-oriented- and traditional business tasks. Keywords: Controller, Role, Chief financial officer, Controlling-oriented
Ferreira, Henrique Cezar. "Geração de referências para as malhas de controle de um laminador de tiras a frio." Universidade de São Paulo, 2004. http://www.teses.usp.br/teses/disponiveis/3/3139/tde-10122004-004129/.
Повний текст джерелаSetup generation systems for cold mill control loops have provided rolling mill operation with high levels of quality and productivity. In case of malfunctioning in the process unit responsible to execute the setup generation system, the normal procedure for the operation of the mill is interrupted, being necessary the use of an emergency operation mode. This work develops an alternative system for references generation which aims to replace the current emergency operation mode based on pre-calculated, not continuous, setup tables for the rolling mill. The developed references generation system, like the normal system used during mill operation, is composed by a cost function which evaluated the mill quality and productivity operation level which a set of references may propose. The cost function is minimized using the Nelder and Mead simplex method and the process variables involved in the cost function are evaluated by a cold rolling mill model composed only by algebraic equations, while the normal operation system uses a classical model, made up by integrals and algebraic equations. Comparing the existing main setup system to the developed reference system it was observed that, despite its simplicity, less accuracy and less robustness, references calculated using this system were accurate enough to achieve better results than the one emergency table mode has provided.
Книги з теми "Controlled rolling"
Khan, Akhlaque Ahmed. Modelling of the recrystallization-stop temperature in a Nb steel during controlled rolling and hot direct rolling. Manchester: University of Manchester, 1993.
Знайти повний текст джерелаAlligator blood: The spectacular rise and fall of the high-rolling whiz-kid who controlled online poker's billions. London: Simon & Schuster, 2013.
Знайти повний текст джерелаW, Smith John. Biomechanically induced and controller coupled oscillations experienced on the F-16XL aircraft during rolling maneuvers. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1996.
Знайти повний текст джерелаW, Smith John. Biomechanically induced and controller coupled oscillations experienced on the F-16XL aircraft during rolling maneuvers. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1996.
Знайти повний текст джерелаSandler, Corey. Official Sega Genesis and Game Gear strategies, 3RD Edition. New York: Bantam Books, 1992.
Знайти повний текст джерелаTom, Badgett, ed. Official Sega Genesis and Game Gear strategies, 2ND Edition. Toronto: Bantam Books, 1991.
Знайти повний текст джерелаCanada. Energy, Mines and Resources Canada. and Manitoba. Dept. of Energy and Mines., eds. Computer controlled energy management system, Rolling River School Division #39. [Ottawa]: Energy, Mines and Resources Canada, 1985.
Знайти повний текст джерелаCONTROLLED HEAT STRAIGHTENING FOR THE ROLLING STOCK STRUCTURES TO RESTORE THEIR SERVICEABILITY. Hlučín: Anisiia Tomanek OSVČ, 2018. http://dx.doi.org/10.47451/book2021-09-01.
Повний текст джерелаUnited States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., ed. Wind-tunnel investigation at supersonic speeds of a remote-controlled canard missile with a free-rolling-tail brake torque system. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.
Знайти повний текст джерелаWind-tunnel investigation at supersonic speeds of a remote-controlled canard missile with a free-rolling-tail brake torque system. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.
Знайти повний текст джерелаЧастини книг з теми "Controlled rolling"
Lenard, J. G. "State-of-The-Art of Controlled Rolling." In Modelling Hot Deformation of Steels, 1–18. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-52515-5_1.
Повний текст джерелаQiao, Shifan, Ping Xu, Xiao Sun, and Ziyong Cai. "Experimental Study on High Rockfill Embankment Filling Quality Controlled by Rolling-Dynamic Compaction Technology." In Lecture Notes in Civil Engineering, 723–38. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-2349-6_46.
Повний текст джерелаRuan, Shipeng, Aimin Zhao, Lijun Wang, Guangjie Han, and Peng Zhang. "Effect of Controlled Rolling and Cooling on Microstructure and Properties of Cold Heading Steel Containing Boron and Titanium." In Lecture Notes in Mechanical Engineering, 361–66. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0107-0_34.
Повний текст джерелаWasiwitono, Unggul, Latifah Nurahmi, Ari Kurniawan Saputra, and Bambang Pramujati. "Robust H∞ Controller with Parametric Uncertainties for Anti-Rolling Gyro System." In Lecture Notes in Mechanical Engineering, 385–93. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-0867-5_46.
Повний текст джерелаSteinle, Claus, Heike Bruch, and Thomas Michels. "Controller-Rollen: Anforderungsprofile, Persönlichkeit und Selbstverständnis — Ein empirisches Schlaglicht." In Zukunftsgerichtetes Controlling, 443–68. Wiesbaden: Gabler Verlag, 1998. http://dx.doi.org/10.1007/978-3-322-89031-3_25.
Повний текст джерелаSteinle, Claus, Heike Bruch, and Thomas Michels. "Controller-Rollen: Anforderungsprofile, Persönlichkeit und Selbstverständnis - Ein empirisches Schlaglicht." In Zukunftsgerichtetes Controlling, 381–406. Wiesbaden: Gabler Verlag, 1996. http://dx.doi.org/10.1007/978-3-322-87516-7_22.
Повний текст джерелаRuicheng, Zhang, and Li Guide. "Design of Active Disturbance Rejection Controller for the Rolling Mill Automatic Position Control Stopping System." In Advances in Intelligent and Soft Computing, 395–403. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-25185-6_51.
Повний текст джерелаRuicheng, Zhang, and Chen Zhikun. "Design of Active Disturbance Rejection Controller for Main Drive System of Rolling Mill with Uncertainty Parameters." In Advances in Intelligent and Soft Computing, 385–94. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-25185-6_50.
Повний текст джерелаGlushchenko, Anton I., and Vladislav A. Petrov. "On Comparative Evaluation of Effectiveness of Neural Network and Fuzzy Logic Based Adjusters of Speed Controller for Rolling Mill Drive." In Advances in Neural Computation, Machine Learning, and Cognitive Research II, 144–50. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-01328-8_15.
Повний текст джерела"Application to Thermomechanical Controlled Processing." In Rod and Bar Rolling, 371–405. CRC Press, 2004. http://dx.doi.org/10.1201/9781482276695-9.
Повний текст джерелаТези доповідей конференцій з теми "Controlled rolling"
Dax, F. R., T. Foust, H. Jones, and N. Fredericksen. "Controlled Temperature Shape Rolling of Alloy 718." In Superalloys. TMS, 1991. http://dx.doi.org/10.7449/1991/superalloys_1991_133_145.
Повний текст джерелаRibeiro e Silva, Sergio, Guillermo Vásquez, C. Guedes Soares, and Adolfo Marón. "The Stabilizing Effects of U-Tanks as Passive and Controlled Anti-Rolling Devices." In ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/omae2012-83501.
Повний текст джерелаBeck, H. P., and D. Turschner. "Parameter estimation for state controlled rolling-mill motors using evolutionary algorithms." In 6th International Workshop on Advanced Motion Control. Proceedings. IEEE, 2000. http://dx.doi.org/10.1109/amc.2000.862903.
Повний текст джерелаZhang, Songtao, Lihua Liang, Xiaoliang Sheng, and Na Wang. "Parameters optimization of controlled anti-rolling tank based on multi-objective optimal method." In 2012 IEEE International Conference on Automation and Logistics (ICAL). IEEE, 2012. http://dx.doi.org/10.1109/ical.2012.6308197.
Повний текст джерелаGrames, Clayton L., Jordan D. Tanner, Brian D. Jensen, Spencer P. Magleby, John Ryan Steger, and Larry L. Howell. "A Meso-Scale Rolling-Contact Gripping Mechanism for Robotic Surgery." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-46516.
Повний текст джерелаSoler, Nicolas, Rolf Isermann, and Frank Feldmann. "A Practical Approach for the Design of Thickness and Tension Controllers in Multi-Stand Cold Rolling Mills." In ASME 2008 Dynamic Systems and Control Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/dscc2008-2129.
Повний текст джерелаMishchenko, V., S. Shejko, and G. Sukhomlin. "Formation of Polygonized Structures and Nuclear Recrystallization under Controlled Rolling of Low-Carbon Steels." In MS&T19. TMS, 2019. http://dx.doi.org/10.7449/2019mst/2019/mst_2019_1427_1431.
Повний текст джерелаMishchenko, V., S. Shejko, and G. Sukhomlin. "Formation of Polygonized Structures and Nuclear Recrystallization under Controlled Rolling of Low-Carbon Steels." In MS&T19. TMS, 2019. http://dx.doi.org/10.7449/2019/mst_2019_1427_1431.
Повний текст джерелаDei, Michele, Jordi Sacristan, Eloi Marigo, Mohanraj Soundara, Lluis Teres, and Francisco Serra-Graells. "A 10-bit linearity current-controlled ring oscillator with rolling regulation for smart sensing." In 2017 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE, 2017. http://dx.doi.org/10.1109/iscas.2017.8050228.
Повний текст джерелаKhaki, Daavood Mirahmadi, Amir Abedi, Francisco Chinesta, Yvan Chastel, and Mohamed El Mansori. "Effect of Controlled Hot Rolling Parameters on Microstructure of a Nb-Microalloyed Steel Sheet." In INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT2010). AIP, 2011. http://dx.doi.org/10.1063/1.3552530.
Повний текст джерела