Статті в журналах з теми "Constrained cutting"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Constrained cutting".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Lu, Zhenguo, Hongbin Wang, Qingliang Zeng, Zhiwen Wang, Lirong Wan, and Changjiang Li. "Research on Cutting Performance of Conical Pick Cutting Rock Plate with One Side Constrain and Three Sides Free." Science Progress 105, no. 1 (January 2022): 003685042210791. http://dx.doi.org/10.1177/00368504221079191.
Повний текст джерелаLiu, Gang, Ming Chen, Peng Nan Li, Qing Zhen Bi, and Bao Cai Guo. "Multi-Constrained Analysis of Metal Cutting and its Application." Key Engineering Materials 589-590 (October 2013): 38–44. http://dx.doi.org/10.4028/www.scientific.net/kem.589-590.38.
Повний текст джерелаPetrushin, S. I., and R. Kh Gubaidulina. "Chip Formation in Constrained Cutting." Russian Engineering Research 38, no. 8 (August 2018): 645–50. http://dx.doi.org/10.3103/s1068798x18080117.
Повний текст джерелаPetrushin, S. I., and A. V. Proskokov. "Theory and geometry of constrained cutting." Russian Engineering Research 29, no. 11 (November 2009): 1132–39. http://dx.doi.org/10.3103/s1068798x09110136.
Повний текст джерелаJuyong Zhang, Jianmin Zheng, and Jianfei Cai. "Interactive Mesh Cutting Using Constrained Random Walks." IEEE Transactions on Visualization and Computer Graphics 17, no. 3 (March 2011): 357–67. http://dx.doi.org/10.1109/tvcg.2010.57.
Повний текст джерелаHifi, Mhand, and Rym M'Hallah. "Approximate algorithms for constrained circular cutting problems." Computers & Operations Research 31, no. 5 (April 2004): 675–94. http://dx.doi.org/10.1016/s0305-0548(03)00020-0.
Повний текст джерелаHough, C. L., and Y. Chang. "Constrained Cutting Rate-Tool Life Characteristic Curve, Part 1: Theory and General Case." Journal of Manufacturing Science and Engineering 120, no. 1 (February 1, 1998): 156–59. http://dx.doi.org/10.1115/1.2830092.
Повний текст джерелаCui, Yue, Guo Hua Qin, and Hai Chao Ye. "Advanced Iterative Approach to Locating Point Layout for Computer Aided Fixture Design." Applied Mechanics and Materials 148-149 (December 2011): 403–8. http://dx.doi.org/10.4028/www.scientific.net/amm.148-149.403.
Повний текст джерелаKim, Jinhak, Mohit Tawarmalani, and Jean-Philippe P. Richard. "On cutting planes for cardinality-constrained linear programs." Mathematical Programming 178, no. 1-2 (June 6, 2018): 417–48. http://dx.doi.org/10.1007/s10107-018-1306-0.
Повний текст джерелаParada Daza, Víctor, Arlindo Gómes de Alvarenga, and José de Diego. "Exact solutions for constrained two-dimensional cutting problems." European Journal of Operational Research 84, no. 3 (August 1995): 633–44. http://dx.doi.org/10.1016/0377-2217(95)00028-o.
Повний текст джерелаPetrushin, S. I., and A. V. Proskokov. "Theory of constrained cutting: Calculating the stress-strain state in the cutting zone." Russian Engineering Research 30, no. 2 (February 2010): 133–37. http://dx.doi.org/10.3103/s1068798x10020085.
Повний текст джерелаHirsh, Bruce R. "The WTO Bananas Decision: Cutting Through the Thicket." Leiden Journal of International Law 11, no. 2 (June 1998): 201–27. http://dx.doi.org/10.1017/s0922156598000168.
Повний текст джерелаO’Connor, Kristian M., Sarika K. Monteiro, and Ian A. Hoelker. "Comparison of Selected Lateral Cutting Activities Used to Assess ACL Injury Risk." Journal of Applied Biomechanics 25, no. 1 (February 2009): 9–21. http://dx.doi.org/10.1123/jab.25.1.9.
Повний текст джерелаShishlyannikov, Dmitriy, and Ivan Zvonarev. "Investigation of the Destruction Process of Potash Ore with a Single Cutter Using Promising Cross Cutting Pattern." Applied Sciences 11, no. 1 (January 5, 2021): 464. http://dx.doi.org/10.3390/app11010464.
Повний текст джерелаZhang, Jinfeng, Hao Wang, Yongsheng Ren, Chao Feng, and Chunjin Zhang. "Chatter and Stability Analysis of the Slender Composite Boring Bar with Constrained Damping Layer." Applied Sciences 10, no. 13 (June 30, 2020): 4537. http://dx.doi.org/10.3390/app10134537.
Повний текст джерелаMa, Yan, and Chun Mei Yang. "The Cutting Optimization of the CNC Bothway Panel Saw under the Technology Constraint." Advanced Materials Research 308-310 (August 2011): 908–13. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.908.
Повний текст джерелаWeintraub, Andrés, and Jorge Vera. "A Cutting Plane Approach for Chance Constrained Linear Programs." Operations Research 39, no. 5 (October 1991): 776–85. http://dx.doi.org/10.1287/opre.39.5.776.
Повний текст джерелаCui, Y., and Q. Chen. "Simple heuristic for the constrained two-dimensional cutting problem." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226, no. 3 (October 24, 2011): 565–72. http://dx.doi.org/10.1177/0954405411421996.
Повний текст джерелаCardozo, C., W. van Ackooij, and L. Capely. "Cutting plane approaches for frequency constrained economic dispatch problems." Electric Power Systems Research 156 (March 2018): 54–63. http://dx.doi.org/10.1016/j.epsr.2017.11.001.
Повний текст джерелаZhe Sun, Zengke Zhang, Huangang Wang, and Min Jiang. "Cutting Plane Method for Continuously Constrained Kernel-Based Regression." IEEE Transactions on Neural Networks 21, no. 2 (February 2010): 238–47. http://dx.doi.org/10.1109/tnn.2009.2035804.
Повний текст джерелаBeliakov, Gleb. "Cutting angle method – a tool for constrained global optimization." Optimization Methods and Software 19, no. 2 (April 2004): 137–51. http://dx.doi.org/10.1080/10556780410001647177.
Повний текст джерелаCui, Yaodong. "Fast heuristic for constrained homogenous T-shape cutting patterns." Applied Mathematical Modelling 36, no. 8 (August 2012): 3696–711. http://dx.doi.org/10.1016/j.apm.2011.11.005.
Повний текст джерелаChen, Yuanyan. "A recursive algorithm for constrained two-dimensional cutting problems." Computational Optimization and Applications 41, no. 3 (October 26, 2007): 337–48. http://dx.doi.org/10.1007/s10589-007-9103-3.
Повний текст джерелаDemassey, Sophie, Christian Artigues, and Philippe Michelon. "Constraint-Propagation-Based Cutting Planes: An Application to the Resource-Constrained Project Scheduling Problem." INFORMS Journal on Computing 17, no. 1 (February 2005): 52–65. http://dx.doi.org/10.1287/ijoc.1030.0043.
Повний текст джерелаStrenkowski, J. S., and S. M. Athavale. "A Partially Constrained Eulerian Orthogonal Cutting Model for Chip Control Tools." Journal of Manufacturing Science and Engineering 119, no. 4B (November 1, 1997): 681–88. http://dx.doi.org/10.1115/1.2836809.
Повний текст джерелаZhang, Chuanwei, Feiyan Han, and Wu Zhang. "A cutting sequence optimization method based on tabu search algorithm for complex parts machining." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, no. 3 (January 23, 2018): 745–55. http://dx.doi.org/10.1177/0954405417752527.
Повний текст джерелаGomez, Michael, and Tony Schmitz. "Stability Evaluation for a Damped, Constrained-Motion Cutting Force Dynamometer." Journal of Manufacturing and Materials Processing 6, no. 1 (February 10, 2022): 23. http://dx.doi.org/10.3390/jmmp6010023.
Повний текст джерелаWang, Yi-Chi, Ming-Jun Wang, and Sung-Chi Lin. "Selection of cutting conditions for power constrained parallel machine scheduling." Robotics and Computer-Integrated Manufacturing 43 (February 2017): 105–10. http://dx.doi.org/10.1016/j.rcim.2015.10.010.
Повний текст джерелаBeasley, J. E. "A population heuristic for constrained two-dimensional non-guillotine cutting." European Journal of Operational Research 156, no. 3 (August 2004): 601–27. http://dx.doi.org/10.1016/s0377-2217(03)00139-5.
Повний текст джерелаParada, Víctor, Mauricio Sepúlveda, Mauricio Solar, and Arlindo Gómes. "Solution for the constrained guillotine cutting problem by simulated annealing." Computers & Operations Research 25, no. 1 (January 1998): 37–47. http://dx.doi.org/10.1016/s0305-0548(98)80006-3.
Повний текст джерелаHifi, Mhand, Rym M'Hallah, and Toufik Saadi. "Algorithms for the Constrained Two-Staged Two-Dimensional Cutting Problem." INFORMS Journal on Computing 20, no. 2 (May 2008): 212–21. http://dx.doi.org/10.1287/ijoc.1070.0233.
Повний текст джерелаGhandforoush, Parviz, and John J. Daniels. "A Heuristic Algorithm for the Guillotine Constrained Cutting Stock Problem." ORSA Journal on Computing 4, no. 3 (August 1992): 351–56. http://dx.doi.org/10.1287/ijoc.4.3.351.
Повний текст джерелаAmaral, Andre R. S., and Mike Wright. "Efficient Algorithm for the Constrained Two‐dimensional Cutting Stock Problem." International Transactions in Operational Research 8, no. 1 (January 2001): 3–13. http://dx.doi.org/10.1111/1475-3995.00002.
Повний текст джерелаCui, Yaodong, and Baixiong Huang. "Heuristic for constrained T-shape cutting patterns of rectangular pieces." Computers & Operations Research 39, no. 12 (December 2012): 3031–39. http://dx.doi.org/10.1016/j.cor.2012.03.001.
Повний текст джерелаXu, Ke, Jiarui Wang, Chih-Hsing Chu, and Kai Tang. "Cutting force and machine kinematics constrained cutter location planning for five-axis flank milling of ruled surfaces." Journal of Computational Design and Engineering 4, no. 3 (February 27, 2017): 203–17. http://dx.doi.org/10.1016/j.jcde.2017.02.003.
Повний текст джерелаBonţiu Pop, Alina Bianca, and Mircea Lobonţiu. "The Influence of Feed per Tooth Variation on Surface Roughness of 7136 Aluminum Alloy in End Milling." Applied Mechanics and Materials 808 (November 2015): 34–39. http://dx.doi.org/10.4028/www.scientific.net/amm.808.34.
Повний текст джерелаHough, C. L., and Y. Chang. "Constrained Cutting Rate-Tool Life Characteristic Curve, Part 2: Convex Programs." Journal of Manufacturing Science and Engineering 120, no. 1 (February 1, 1998): 160–65. http://dx.doi.org/10.1115/1.2830093.
Повний текст джерелаKorlos, Apostolos, and Theodoros I. Kosmanis. "Optimal Solution of Multi-Pass Turning Processes by Means of the Differential Evolutionary Algorithm for Constraint Problems." Applied Mechanics and Materials 809-810 (November 2015): 165–70. http://dx.doi.org/10.4028/www.scientific.net/amm.809-810.165.
Повний текст джерелаDaniels, John J., and Parviz Ghandforoush. "An Improved Algorithm for the Non-Guillotine-Constrained Cutting-Stock Problem." Journal of the Operational Research Society 41, no. 2 (February 1990): 141. http://dx.doi.org/10.2307/2583733.
Повний текст джерелаKobayashi, Ken, Yuichi Takano, and Kazuhide Nakata. "Bilevel cutting-plane algorithm for cardinality-constrained mean-CVaR portfolio optimization." Journal of Global Optimization 81, no. 2 (July 8, 2021): 493–528. http://dx.doi.org/10.1007/s10898-021-01048-5.
Повний текст джерелаViswanathan, K. V., and A. Bagchi. "Best-First Search Methods for Constrained Two-Dimensional Cutting Stock Problems." Operations Research 41, no. 4 (August 1993): 768–76. http://dx.doi.org/10.1287/opre.41.4.768.
Повний текст джерелаCui, Yaodong, and Baixiong Huang. "A heuristic for constrained T-shape cutting patterns of circular items." Engineering Optimization 43, no. 8 (August 2011): 867–77. http://dx.doi.org/10.1080/0305215x.2010.522708.
Повний текст джерелаDaniels, John J., and Parviz Ghandforoush. "An Improved Algorithm for the Non-Guillotine-Constrained Cutting-Stock Problem." Journal of the Operational Research Society 41, no. 2 (February 1990): 141–49. http://dx.doi.org/10.1057/jors.1990.22.
Повний текст джерелаHifi, Mhand, and Rym M'Hallah. "An Exact Algorithm for Constrained Two-Dimensional Two-Staged Cutting Problems." Operations Research 53, no. 1 (February 2005): 140–50. http://dx.doi.org/10.1287/opre.1040.0154.
Повний текст джерелаHifi, Mhand, and Toufik Saadi. "A cooperative algorithm for constrained two-staged two-dimensional cutting problems." International Journal of Operational Research 9, no. 1 (2010): 104. http://dx.doi.org/10.1504/ijor.2010.034363.
Повний текст джерелаAlvarez-Valdes, R., F. Parreño, and J. M. Tamarit. "A GRASP algorithm for constrained two-dimensional non-guillotine cutting problems." Journal of the Operational Research Society 56, no. 4 (April 2005): 414–25. http://dx.doi.org/10.1057/palgrave.jors.2601829.
Повний текст джерелаHifi, Mhand, Stephane Negre, Rachid Ouafi, and Toufik Saadi. "A parallel algorithm for constrained two-staged two-dimensional cutting problems." Computers & Industrial Engineering 62, no. 1 (February 2012): 177–89. http://dx.doi.org/10.1016/j.cie.2011.09.005.
Повний текст джерелаHifi, Mhand, and Rym M’Hallah. "Strip generation algorithms for constrained two-dimensional two-staged cutting problems." European Journal of Operational Research 172, no. 2 (July 2006): 515–27. http://dx.doi.org/10.1016/j.ejor.2004.10.020.
Повний текст джерелаVelasco, André Soares, and Eduardo Uchoa. "Improved state space relaxation for constrained two-dimensional guillotine cutting problems." European Journal of Operational Research 272, no. 1 (January 2019): 106–20. http://dx.doi.org/10.1016/j.ejor.2018.06.016.
Повний текст джерелаAraujo, Janniele A. S., Haroldo G. Santos, Bernard Gendron, Sanjay Dominik Jena, Samuel S. Brito, and Danilo S. Souza. "Strong bounds for resource constrained project scheduling: Preprocessing and cutting planes." Computers & Operations Research 113 (January 2020): 104782. http://dx.doi.org/10.1016/j.cor.2019.104782.
Повний текст джерела