Увійти

Готові списки джерел за темами / Conoscopic holography / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Conoscopic holography.

Статті в журналах з теми "Conoscopic holography"

Автор: Grafiati

Опубліковано: 11 березня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Conoscopic holography".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Sirat, Gabriel, and Demetri Psaltis. "Conoscopic holography." Optics Letters 10, no. 1 (January 1, 1985): 4. http://dx.doi.org/10.1364/ol.10.000004.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Sirat, Gabriel Y. "Conoscopic holography II Rigorous derivation." Journal of the Optical Society of America A 9, no. 1 (January 1, 1992): 84. http://dx.doi.org/10.1364/josaa.9.000084.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Malet, Y., and G. Y. Sirat. "Conoscopic holography application: multipurpose rangefinders." Journal of Optics 29, no. 3 (June 1998): 183–87. http://dx.doi.org/10.1088/0150-536x/29/3/015.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Kim, Soo-Gil, and MyungSook Ko. "A study on the Theoretical Resolution of Conoscopic Holography." Journal of the Korean Institute of Illuminating and Electrical Installation Engineers 28, no. 8 (August 31, 2014): 1–5. http://dx.doi.org/10.5207/jieie.2014.28.8.001.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Mugnier, Laurent M., Gabriel Y. Sirat, and Didier Charlot. "Conoscopic holography: two-dimensional numerical reconstructions." Optics Letters 18, no. 1 (January 1, 1993): 66. http://dx.doi.org/10.1364/ol.18.000066.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Kim, Soo-Gil. "Phase Error Analysis of Modified Conoscopic Holography." Journal of the Korean Institute of Illuminating and Electrical Installation Engineers 31, no. 10 (October 31, 2017): 9–15. http://dx.doi.org/10.5207/jieie.2017.31.10.009.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Álvarez, Ignacio, Jose Enguita, María Frade, Jorge Marina, and Guillermo Ojea. "On-Line Metrology with Conoscopic Holography: Beyond Triangulation." Sensors 9, no. 9 (September 4, 2009): 7021–37. http://dx.doi.org/10.3390/s90907021.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Kim, Soo-Gil. "Resolution of the Modified Conoscopic Holography Considering Birefringence." Journal of the Korean Institute of Illuminating and Electrical Installation Engineers 35, no. 7 (July 31, 2021): 6–13. http://dx.doi.org/10.5207/jieie.2021.35.7.006.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Mugnier, L. M., and G. Y. Sirat. "On-axis conoscopic holography without a conjugate image." Optics Letters 17, no. 4 (February 15, 1992): 294. http://dx.doi.org/10.1364/ol.17.000294.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Sirat, Gabriel Y. "Conoscopic holography I Basic principles and physical basis." Journal of the Optical Society of America A 9, no. 1 (January 1, 1992): 70. http://dx.doi.org/10.1364/josaa.9.000070.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Kim, Soo-Gil. "Basic Study on Resolution of the Modified Conoscopic Holography." Journal of the Korean Institute of Illuminating and Electrical Installation Engineers 35, no. 6 (June 30, 2021): 1–8. http://dx.doi.org/10.5207/jieie.2021.35.6.001.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Mugnier, Laurent M. "Conoscopic holography: toward three-dimensional reconstructions of opaque objects." Applied Optics 34, no. 8 (March 10, 1995): 1363. http://dx.doi.org/10.1364/ao.34.001363.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Zapico, P., D. Blanco, C. Cuervo, G. Valiño, and J. C. Rico. "Cutting-tool wear characterization by means of conoscopic holography." Procedia Manufacturing 13 (2017): 13–20. http://dx.doi.org/10.1016/j.promfg.2017.09.003.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Schirripa Spagnolo, Giuseppe, Lorenzo Cozzella, and Carla Simonetti. "Linear conoscopic holography as aid for forensic handwriting expert." Optik 124, no. 15 (August 2013): 2155–60. http://dx.doi.org/10.1016/j.ijleo.2012.06.097.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Sancho, L. F., J. Diaz, and I. Alvarez. "Application of conoscopic holography to control the melt stirring." Revue de Métallurgie 103, no. 3 (March 2006): 121–30. http://dx.doi.org/10.1051/metal:2006117.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Zapico, P., H. Patiño, P. Fernández, G. Valiño, and J. C. Rico. "Conoscopic holography systematic error processing by means of gaussian filters." Procedia Manufacturing 13 (2017): 426–33. http://dx.doi.org/10.1016/j.promfg.2017.09.040.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Zapico, P., P. Fernández, D. Blanco, G. Valiño, and J. C. Rico. "A Comparison between Discrete and Continuous Scanning with Conoscopic Holography." Procedia Engineering 132 (2015): 840–47. http://dx.doi.org/10.1016/j.proeng.2015.12.568.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Blanco, D., G. Valiño, P. Fernández, J. C. Rico, and S. Palomo. "Influence of Roughness on Conoscopic Holography Digitizing of DIN34CrMo4 Surfaces." Procedia Engineering 63 (2013): 472–80. http://dx.doi.org/10.1016/j.proeng.2013.08.259.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Ren, Shu Yan, Yong Gang Yang, and Hai Long Duan. "Research of Zero Calibration in Conoscopic Holography Measurement Based on Image." Applied Mechanics and Materials 303-306 (February 2013): 386–89. http://dx.doi.org/10.4028/www.scientific.net/amm.303-306.386.

Повний текст джерела

Анотація:

Non-contact measurement based on conoscopic holography is a kind of interferometry with common path, so it is not influenced much by other factors such as vibration. But the measurement result is affected by the uniformity of the crystal, which is analyzed in this paper, and corresponding method of adjustment based on image is discussed. And B-splines function is used to calculate zero position in measurement image, which is fitted over the patch image in the neighborhood of gray extreme points of the stripes, which is important to reduce the repeatability error, optimize design, and improve the accuracy of system.

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Kim, Soo-Gil. "Removal of bias and conjugate image using the modified conoscopic holography." Journal of the Korean Institute of Illuminating and Electrical Installation Engineers 29, no. 12 (December 31, 2015): 22–27. http://dx.doi.org/10.5207/jieie.2015.29.12.022.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Zapico, Pablo, Gonzalo Valiño, J. Carlos Rico, Víctor M. Meana, and Pedro Fernández. "On-machine non-contact roughness verification system based on Conoscopic holography." Precision Engineering 73 (January 2022): 115–27. http://dx.doi.org/10.1016/j.precisioneng.2021.09.004.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Zapico, P., P. Fernández, J. C. Rico, G. Valiño, and H. Patiño. "Extrinsic calibration of a conoscopic holography system integrated in a CMM." Precision Engineering 52 (April 2018): 484–93. http://dx.doi.org/10.1016/j.precisioneng.2017.12.007.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Enguita, Jose´ M. "Denoising of conoscopic holography fringe patterns with orientational filters: a comparative study." Optical Engineering 44, no. 3 (March 1, 2005): 035603. http://dx.doi.org/10.1117/1.1872972.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Enguita, José Maria. "Conoscopic holography-based long-standoff profilometer for surface inspection in adverse environment." Optical Engineering 45, no. 7 (July 1, 2006): 073602. http://dx.doi.org/10.1117/1.2219097.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Peña, F., A. Fernández, P. Zapico, G. Valiño, and J. C. Rico. "Conoscopic Holography feasibility for form error in-situ monitoring in Additive Manufacturing." IFAC-PapersOnLine 55, no. 10 (2022): 1031–36. http://dx.doi.org/10.1016/j.ifacol.2022.09.520.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Ren, Shuyan, Yonggang Yang, Hailong Duan, and Jing Li. "Design and uncertainty analysis of non-contact measurement system based on conoscopic holography." JOURNAL OF ELECTRONIC MEASUREMENT AND INSTRUMENT 24, no. 7 (August 3, 2010): 616–20. http://dx.doi.org/10.3724/sp.j.1187.2010.00616.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Bentz, Robert M., and Stephen F. Balshi. "Complete Oral Rehabilitation With Implants Using CAD/CAM Technology, Stereolithography, and Conoscopic Holography." Implant Dentistry 21, no. 1 (February 2012): 8–12. http://dx.doi.org/10.1097/id.0b013e318243a1aa.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Fei, Zhigen, Kaichuang Wang, Hui Wang, and Yanqiu Xiao. "The inner-cone angle measurement of aero-engine nozzle based on conoscopic holography." Optik 169 (September 2018): 416–23. http://dx.doi.org/10.1016/j.ijleo.2018.05.062.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Spagnolo, Giuseppe Schirripa, Carla Simonetti, and Lorenzo Cozzella. "Superposed strokes analysis by conoscopic holography as an aid for a handwriting expert." Journal of Optics A: Pure and Applied Optics 6, no. 9 (August 10, 2004): 869–74. http://dx.doi.org/10.1088/1464-4258/6/9/009.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Liu, Jiang Sheng, and Juan Qian. "Problem Analysis of Conoprobe in Gear Measurement Application." Key Engineering Materials 572 (September 2013): 347–50. http://dx.doi.org/10.4028/www.scientific.net/kem.572.347.

Повний текст джерела

Анотація:

Conoprobe is used for non-contact measurement utilizing conoscopic holography technology, which has characteristics of high measurement precision and large measuring angle range. However, the conoprobe performs inaccurate and instable in gear measurement applications. To verify its accuracy, an experiment setup is built using high performance coordinate measuring machine (CMM) to measure surfaces of gaugeblocks that have similar material as gear workpieces. Compared the collected data from the CMM with the conoprobe values, those problems mentioned above are validated. In this study it can be stated that measuring accuracy of conoprobe drops dramatically when measuring bright metal surfaces, and even its measuring error could be more than dozens of microns when the measurement is in large angle, therefore it is completely not fit for precision measurement applications.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Enguita, José María. "Improving signal processing performance on a conoscopic holography-based profilometer with phase-shifting interferometry algorithms." Optical Engineering 46, no. 9 (September 1, 2007): 093605. http://dx.doi.org/10.1117/1.2786862.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Álvarez, Ignacio. "On-line submicron profile measurements from safe distances with conoscopic holography: feasibility and potential problems." Optical Engineering 47, no. 2 (February 1, 2008): 023602. http://dx.doi.org/10.1117/1.2844713.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Simpson, Amber L., Kay Sun, Thomas S. Pheiffer, D. Caleb Rucker, Allen K. Sills, Reid C. Thompson, and Michael I. Miga. "Evaluation of Conoscopic Holography for Estimating Tumor Resection Cavities in Model-Based Image-Guided Neurosurgery." IEEE Transactions on Biomedical Engineering 61, no. 6 (June 2014): 1833–43. http://dx.doi.org/10.1109/tbme.2014.2308299.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Daffara, Claudia, and Sara Mazzocato. "Surface Metrology Based on Scanning Conoscopic Holography for In Situ and In-Process Monitoring of Microtexture in Paintings." Sensors 22, no. 17 (September 2, 2022): 6637. http://dx.doi.org/10.3390/s22176637.

Повний текст джерела

Анотація:

In the field of engineering, surface metrology is a valuable tool codified by international standards that enables the quantitative study of small-scale surface features. However, it is not recognized as a resource in the field of cultural heritage. Motivated by this fact, in this work, we demonstrate the use and the usefulness of surface metrology based on scanning conoscopic holography for monitoring treatments on the Venetian masterpiece by Tintoretto St. Martial in Glory with the Saints Peter and Paul. We carried out in situ and in-process monitoring of the painting microtexture during an experimental, innovative laser–chemical treatment, and we performed a statistical analysis based on ISO areal field parameters. A wide and in-band roughness analysis through the complementary use of amplitude, spatial, and hybrid parameters confirmed the noninvasive nature of the whole treatment on the painting surface topography, giving us the chance to review and critically discuss the use of these parameters in a real case in heritage science.

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Guo, Yanyan, Xiangqian Che, Xiangli Meng, and Li Bian. "A Globe Calibration Method for Optical Multisensor in 3D Complex Surface Measurement System." Journal of Sensors 2022 (May 23, 2022): 1–11. http://dx.doi.org/10.1155/2022/8989768.

Повний текст джерела

Анотація:

There are few existing omnipotent sensors that handle a complex surface inspection task in an accurate and effective way. The prevailing solution is integrating multiple sensors and taking advantage of their strengths. One key task is the extrinsic parameter calibration (global calibration) of the multiple sensors before measurement. This paper proposes a method of optimal extrinsic calibration for a structured light sensor (SLS) and conoscopic holography sensor (CHS). In adopting this method, a common planar calibration board is placed with different poses in front of the multisensory system, and the extrinsic calibration problem is solved through a three-dimensional reconstruction of the calibration board and using geometric constraints of the views from the SLS and CHS. This calibration method, which uses only the plane calibration board, is simple. Physical experiments demonstrate that the proposed method is robust and accurate in the calibration of multiple inhomogeneous optical sensors for the measurement of a complex surface.

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Mazzocato, Sara, Giacomo Marchioro, and Claudia Daffara. "Feasibility and performance analysis in 3D printing of artworks using laser scanning microprofilometry." ACTA IMEKO 11, no. 1 (March 31, 2022): 7. http://dx.doi.org/10.21014/acta_imeko.v11i1.1098.

Повний текст джерела

Анотація:

<p class="Abstract">We investigated optical scanning microprofilometry and conoscopic holography sensors as nondestructive testing and evaluation tools in archeology for obtaining an accurate 3D printed reproduction of the data. The modular microprofilometer prototype allows a versatile acquisition of different materials and shapes producing a high-quality dataset that enables surface modelling at micrometric scales from which a "scientific" replica can be obtained through 3D printing technologies. As exemplar case study, an archeological amphora was acquired and 3D printed. In order to test the feasibility and the performance of the whole process chain from the acquisition to the reproduction, we propose a statistical multiscale analysis of the surface signal of object and replica based on metrological parameters. This approach allows to demonstrate that the accuracy of the 3D printing process preserves the range of spatial wavelengths that characterizes the surface features of interest within the technology capabilities. This work extends the usefulness of the replicas from museum exposition to scientific applications.</p>

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Valiño, Gonzalo, Pablo Zapico, Pedro Fernández, J. Carlos Rico, Sabino Mateos, and David Blanco. "Measurement and correction of the slope angle of flat surfaces digitized by a conoscopic holography system." Precision Engineering 46 (October 2016): 369–76. http://dx.doi.org/10.1016/j.precisioneng.2016.06.006.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Brudfors, Mikael, Verónica García-Vázquez, Begoña Sesé-Lucio, Eugenio Marinetto, Manuel Desco, and Javier Pascau. "ConoSurf: Open-source 3D scanning system based on a conoscopic holography device for acquiring surgical surfaces." International Journal of Medical Robotics and Computer Assisted Surgery 13, no. 3 (November 21, 2016): e1788. http://dx.doi.org/10.1002/rcs.1788.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Blanco, David, Gonzalo Valiño, Pedro Fernández, J. Carlos Rico, and Sabino Mateos. "Influence of part material and sensor adjustment on the quality of digitised point-clouds using conoscopic holography." Precision Engineering 42 (October 2015): 42–52. http://dx.doi.org/10.1016/j.precisioneng.2015.03.008.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Valiño, G., J. C. Rico, P. Fernández, B. J. Álvarez, and Y. Fernández. "Capability of conoscopic holography for digitizing and measuring of layer thickness on PLA parts built by FFF." Procedia Manufacturing 41 (2019): 129–36. http://dx.doi.org/10.1016/j.promfg.2019.07.038.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

He, Wantao, Kai Zhong, Zhongwei Li, Xianglin Meng, Xu Cheng, Xingjian Liu, and Yusheng Shi. "Accurate calibration method for blade 3D shape metrology system integrated by fringe projection profilometry and conoscopic holography." Optics and Lasers in Engineering 110 (November 2018): 253–61. http://dx.doi.org/10.1016/j.optlaseng.2018.06.012.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Patiño, H., P. Zapico, J. C. Rico, P. Fernández, and G. Valiño. "A Gaussian filtering method to reduce directionality on high-density point clouds digitized by a conoscopic holography sensor." Precision Engineering 54 (October 2018): 91–98. http://dx.doi.org/10.1016/j.precisioneng.2018.05.005.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Mazzocato, Sara, and Claudia Daffara. "Experiencing the Untouchable: A Method for Scientific Exploration and Haptic Fruition of Artworks Microsurface Based on Optical Scanning Profilometry." Sensors 21, no. 13 (June 24, 2021): 4311. http://dx.doi.org/10.3390/s21134311.

Повний текст джерела

Анотація:

The experience of an object derives not only from the sight but also from the touch: a tactile exploration can reveal the smallest information trapped within the surface up to our tactile detective threshold. Starting from the importance of this observation in the case of works of art, this research demonstrates the use of conoscopic holography sensors for high-quality acquisition of the surface of artworks (up to the micro-scale) suitable also to 3D printing. The purpose is twofold, allowing for the tactile use of the artwork, which is otherwise impossible, for visually impaired people and for new use in regard to scientific information purposes. In detail, the workflow to obtain a 3D printed replica of multiscale and polychrome artworks suitable for the haptic fruition is validated, but the potential of the tool as an innovative resource for scientific visualization of the microsurface of the artwork for conservation issues is also demonstrated. The validation was performed on notable Italian masterpieces, such as Donatello’s “Death Cristh” bronze relief in Padua and the Tintoretto painting “St. Martial in Glory with the Saints Peter and Paul” in Venice.

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Zapico, Pablo, Héctor Patiño, Gonzalo Valiño, Pedro Fernández, and J. Carlos Rico. "CNC centralized control for digitizing freeform surfaces by means of a conoscopic holography sensor integrated in a machining centre." Precision Engineering 55 (January 2019): 474–83. http://dx.doi.org/10.1016/j.precisioneng.2018.11.001.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Giganto, Sara, Susana Martínez-Pellitero, Eduardo Cuesta, Víctor M. Meana, and Joaquín Barreiro. "Analysis of Modern Optical Inspection Systems for Parts Manufactured by Selective Laser Melting." Sensors 20, no. 11 (June 4, 2020): 3202. http://dx.doi.org/10.3390/s20113202.

Повний текст джерела

Анотація:

Metal additive manufacturing (AM) allows obtaining functional parts with the possibility of optimizing them topologically without affecting system performance. This is of great interest for sectors such as aerospace, automotive, and medical–surgical. However, from a metrological point of view, the high requirements applied in these sectors constitute a challenge for inspecting these types of parts. Non-contact inspection has gained great relevance due to the rapid verification of AM parts. Optical measurement systems (OMSs) are being increasingly adopted for geometric dimensioning and tolerancing (GD&T) verification within the context of Industry 4.0. In this paper, the suitability (advantages and limitations) of five different OMSs (based on laser triangulation, conoscopic holography, and structured light techniques) for GD&T verification of parts manufactured by selective laser melting (SLM) is analyzed. For this purpose, a specific testing part was designed and SLM-manufactured in 17-4PH stainless steel. Once the part was measured by contact (obtaining the reference GD&T values), it was optically measured. The scanning results allow comparing the OMSs in terms of their inspection speed as well as dimensional and geometrical accuracy. As a result, two portable systems (handheld laser triangulation and structured blue-light scanners) were identified as the most accurate optical techniques for scanning SLM parts.

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Rico, J. Carlos, Gonzalo Valiño, Pedro Fernández, Pablo Zapico, David Blanco, and Sabino Mateos. "Adjustment recommendations of a conoscopic holography sensor for a reliable scanning of surfaces with roughness grades obtained by different processes." Precision Engineering 42 (October 2015): 335–45. http://dx.doi.org/10.1016/j.precisioneng.2015.04.011.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Valiño, G., J. C. Rico, P. Zapico, P. Fernández, and S. Mateos. "Influence of Surface Location within Depth of Field on Measuring by a Conoscopic Holography Sensor Integrated in a Machining Centre." Procedia Engineering 132 (2015): 832–39. http://dx.doi.org/10.1016/j.proeng.2015.12.567.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Callai, Sergio Copetti, Manuel De Rose, Piergiorgio Tataranni, Christina Makoundou, Cesare Sangiorgi, and Rosolino Vaiana. "Microsurfacing Pavement Solutions with Alternative Aggregates and Binders: A Full Surface Texture Characterization." Coatings 12, no. 12 (December 6, 2022): 1905. http://dx.doi.org/10.3390/coatings12121905.

Повний текст джерела

Анотація:

The road surface texture is responsible for controlling several quality/safety road indicators, such as friction, noise, and fuel consumption. Road texture can be classified into different wavelengths, and it is dependent on the material used in the paving solution. With the aim of evaluating and characterizing the surface texture of a microsurfacing road pavement, six microsurfacing samples were made in the laboratory with both traditional materials (basaltic aggregates and bituminous emulsion) and with innovative materials from recycling procedures (crumb rubber (CR) and artificial engineered aggregate (AEA)). The characterization was performed through the use of a conoscopic holography profilometer with high precision and post-processing of the profiles detected through consolidated algorithms (ISO standards). We found that the aggregate type plays a very important role in the pavement texture. The binder agent seems to be highly important, but more studies regarding this are necessary. The use of crumb rubber as an aggregate proved to be feasible, and the texture parameters that were obtained were in accordance with the benchmark ones. In addition, the study shows that the use of artificial engineered aggregates does not impair the surface texture. Finally, the use of the texture parameters defined by the ISO standards, together with a statistical analysis, could be useful for defining the surface texture characteristics of microsurfacing.

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Valiño, Gonzalo, J. Carlos Rico, Pablo Zapico, and Pedro Fernández. "Influence of scanning strategies on measuring and surface digitising by means of a conoscopic holography sensor integrated in a machining centre." International Journal of Mechatronics and Manufacturing Systems 10, no. 2 (2017): 167. http://dx.doi.org/10.1504/ijmms.2017.084815.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Fernández, Pedro, J. Carlos Rico, Pablo Zapico, and Gonzalo Valiño. "Influence of scanning strategies on measuring and surface digitising by means of a conoscopic holography sensor integrated in a machining centre." International Journal of Mechatronics and Manufacturing Systems 10, no. 2 (2017): 167. http://dx.doi.org/10.1504/ijmms.2017.10005772.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!