Дисертації з теми "Concrete construction – Mathematical models"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Concrete construction – Mathematical models".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Hon, Alan 1976. "Compressive membrane action in reinforced concrete beam-and-slab bridge decks." Monash University, Dept. of Civil Engineering, 2003. http://arrow.monash.edu.au/hdl/1959.1/5629.
Повний текст джерелаLiu, Chi-hong, and 廖志航. "Time-dependent behaviour of concrete structures with special referenceto podium and frame structures." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B38674245.
Повний текст джерелаLam, Wai-yin, and 林慧賢. "Plate-reinforced composite coupling beams: experimental and numerical studies." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B37311797.
Повний текст джерелаNg, Pui-lam, and 吳沛林. "Constitutive modelling and finite element analysis of reinforced concrete structures." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B3897566X.
Повний текст джерелаChoi, Joonho. "Concurrent fire dynamic models and thermomechanical analysis of steel and concrete structures." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26679.
Повний текст джерелаThölken, Denise. "Efeito da rigidez de pilar parede no comportamento sísmico de edifício de concreto armado." Universidade Tecnológica Federal do Paraná, 2013. http://repositorio.utfpr.edu.br/jspui/handle/1/962.
Повний текст джерелаThe aim of this work is to study the stiffness effect of wall columns on structural behavior of reinforced concrete buildings subjected to seismic action. The premises of the Brazilian standard ABNT NBR14521:2006 were considered, which presents criteria for earthquake resistant design of structures. The linear analysis employed the methods of the Brazilian standard - equivalent static load method, response spectrum analysis and time history method - were applied to buildings with two types of structural systems, namely concrete frame and dual system concrete frame and wall columns. The results were analyzed in edge frames structures in the longitudinal and transverse directions, comparing the displacement of each floor and shear, bending moment and axial forces on the bases of the columns. A comparison was made between the three methods applied and the structural systems analyzed.
Destrebecq, Jean-François. "Modele d'endommagement d'elements de structures en beton soumis a des sollicitations de fatigue." Clermont-Ferrand 2, 1987. http://www.theses.fr/1987CLF21070.
Повний текст джерелаWares, Arsalan Jones Graham A. Cottrill James F. "Middle school students' construction of mathematical models." Normal, Ill. Illinois State University, 2001. http://wwwlib.umi.com/cr/ilstu/fullcit?p3064487.
Повний текст джерелаTitle from title page screen, viewed March 30, 2006. Dissertation Committee: Graham A. Jones, James Cottrill (co-chairs), Linnea Sennott. Includes bibliographical references (leaves 107-111) and abstract. Also available in print.
Khadka, Chandra. "PENALIZED REGRESSION MODELS FOR CONCRETE STRENGTH ESTIMATION." OpenSIUC, 2021. https://opensiuc.lib.siu.edu/theses/2818.
Повний текст джерелаKeenan, David Wayne 1955. "BLOCK PLAN CONSTRUCTION FROM A DELTAHEDRON-BASED ADJACENCY GRAPH." Thesis, The University of Arizona, 1986. http://hdl.handle.net/10150/292025.
Повний текст джерелаOzturk, Hande Isik. "Parametric Study On Selected Mathematical Models For Dynamic Creep Behavior Of Asphalt Concrete." Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/12609023/index.pdf.
Повний текст джерелаFerdjani, Aissam. "Behaviour of concrete under generalized biaxial loadings." Thesis, McGill University, 1987. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63762.
Повний текст джерелаTucker, Gayle. "Mathematical modelling in neurophysiology : neuronal geometry in the construction of neuronal models." Thesis, University of Oxford, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.414405.
Повний текст джерелаWilliams, Robert C. "The Development of Mathematical Models for Preliminary Prediction of Highway Construction Duration." Diss., Virginia Tech, 2008. http://hdl.handle.net/10919/29483.
Повний текст джерелаPh. D.
Ranasinghe, Kulatilaka Arthanayake Malik Kumar. "Quantification of risks during feasibility analysis for capital projects." Thesis, University of British Columbia, 1986. http://hdl.handle.net/2429/26730.
Повний текст джерелаApplied Science, Faculty of
Civil Engineering, Department of
Graduate
Chen, Zebin. "Framework-based model construction with AOP assistance /." Connect to title online (ProQuest), 2008. http://proquest.umi.com/pqdweb?did=1588418351&sid=1&Fmt=2&clientId=11238&RQT=309&VName=PQD.
Повний текст джерелаTypescript. Includes vita and abstract. Includes bibliographical references (leaves 123-127). Also available online in ProQuest, free to University of Oregon users.
Amidon, Bruce Douglas. "An economic analysis of counterfeit threaded fasteners in the construction industry." Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA231492.
Повний текст джерелаThesis Advisor(s): Carrick, Paul M. Second Reader: Gates, William R. "June 1990." Description based on signature page on October 16, 2009. DTIC Descriptor(s): Mathematical models, industries, problem solving, screw threads, engineering, fastenings, game theory, force(mechanics), economic analysis, construction DTIC Indicator(s): Threaded fasteners, fasteners, game theory, theses Author(s) subject terms: Threaded fasteners; substandard fasteners; game theory Includes bibliographical references (p. 50-51). Also available online.
Lanzas, Lourdes Eneida 1962. "A parametric study on the behavior of slender reinforced concrete frames." Thesis, The University of Arizona, 1989. http://hdl.handle.net/10150/276945.
Повний текст джерелаMalone, Brett. "Multidisciplinary optimization in aircraft design using analysis technology models." Thesis, This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-10102009-020042/.
Повний текст джерелаGonzalez, Julian Santiago Sr. "Using Fuzzy Mathematical Models for construction project scheduling with time, cost and material restrictions." Ohio University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1180987976.
Повний текст джерелаChen, Xi, and 陈曦. "On construction and control of probabilistic Boolean networks." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2012. http://hub.hku.hk/bib/B48329605.
Повний текст джерелаpublished_or_final_version
Mathematics
Doctoral
Doctor of Philosophy
Phaobunjong, Kan. "Parametric cost estimating model for conceptual cost estimating of building construction projects." Thesis, Full text (PDF) from UMI/Dissertation Abstracts International, 2002. http://wwwlib.umi.com/cr/utexas/fullcit?p3086790.
Повний текст джерелаChan, Ka-ho Enoch, and 陳家灝. "Experimental and numerical studies of concrete beams prestressed with unbonded tendons." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2008. http://hub.hku.hk/bib/B40988004.
Повний текст джерелаYousuf, Saif. "Structural Low Cement Content (LCC) Concrete: An Eco-friendly Alternative for Construction Industry." Thesis, Université d'Ottawa / University of Ottawa, 2018. http://hdl.handle.net/10393/37590.
Повний текст джерелаKilic, Mustafa Hakan. "Three-dimensional micromechanical models for the nonlinear analysis of pultruded composite structures." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/20735.
Повний текст джерелаChang, Min-Yung. "Active vibration control of composite structures." Diss., This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-09162005-115021/.
Повний текст джерелаMirjalili, Vahid. "Modelling the structural efficiency of cross-sections in limited torsion stiffness design." Thesis, McGill University, 2006. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=99780.
Повний текст джерелаRecently introduced for bending stiffness design, shape transformers are presented in this thesis for optimizing the design of shafts in torsion. Shape transformers are geometric parameters defined to classify shapes and to model structural efficiency. The study of shape transformers are centered on concept selection in structural design. These factors are used to formulate indices of material and shape selection for minimum mass design. An advantage of the method of shape transformers is that the contribution of the shape can be decoupled from the contribution of the size of a cross-section. This feature gives the designer insight into the effects that scaling, shape, as well as material have on the overall structural performance.
Similar to the index for bending, the performance index for torsion stiffness design is a function of the relative scaling of two cross-sections. The thesis examines analytically and graphically the impact of scaling on the torsional efficiency of alternative cross-sections. The resulting maps assist the selection of the best material and shape for cross-sections subjected to dimensional constraints. It is shown that shape transformers for torsion, unlike those for bending, are generally function of the scaling direction.
The efficiency maps ease the visual contrast among the efficiency of open-walled cross-sections and that of close-walled cross-sections. As expected, the maps show the relative inefficiency of the former compared to the latter. They can also set the validity range of thin- and thick-walled theory in torsion stiffness design. The analytical results are validated with the numerical data obtained from ANSYS to guarantee the consistency of the models. The thesis concludes with three case studies that demonstrate the method.
Tsang, Yick-tat, and 曾億達. "Modelling and forecasting the general financial performance of listed construction firms in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/198814.
Повний текст джерелаpublished_or_final_version
Civil Engineering
Doctoral
Doctor of Philosophy
Bairrão, Rogério. "Modèle de comportement à la ruine des structures constituées de poutres en béton armé : prise en compte des phénomènes d'endommagement et de plasticité." Paris 6, 1986. http://www.theses.fr/1986PA066014.
Повний текст джерелаRamachandran, Selvaraj. "Hypoid gear optimization." PDXScholar, 1992. https://pdxscholar.library.pdx.edu/open_access_etds/4419.
Повний текст джерела繆泉明 and Quanming Miao. "Effect of submerged vertical structures on ship waves." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B3025176X.
Повний текст джерелаLaw, Gordon Ki-Wai. "Decision support system for construction cycle design." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/26715.
Повний текст джерелаApplied Science, Faculty of
Civil Engineering, Department of
Graduate
Zhang, Mingyang 1981. "Macromodeling and simulation of linear components characterized by measured parameters." Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=112589.
Повний текст джерелаMa, Ho-yin, and 馬浩然. "Competitive tendering in construction: a study of some theoretical bidding models and their application in thelocal construction industry." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1987. http://hub.hku.hk/bib/B31262314.
Повний текст джерелаWu, Ching-Tang. "Construction of Brownian Motions in Enlarged Filtrations and Their Role in Mathematical Models of Insider Trading." Doctoral thesis, Humboldt-Universität zu Berlin, Mathematisch-Naturwissenschaftliche Fakultät II, 1999. http://dx.doi.org/10.18452/14364.
Повний текст джерелаIn this thesis, we study Gaussian processes generated by certain linear transformations of two Gaussian martingales. This class of transformations is motivated by nancial equilibrium models with heterogeneous information. In Chapter 2 we derive the canonical decomposition of such processes, which are constructed in an enlarged ltration, as semimartingales in their own ltration. The resulting drift is described in terms of Volterra kernels. In particular we characterize those processes which are Brownian motions in their own ltration. In Chapter 3 we construct new orthogonal decompositions of Brownian ltrations. In Chapters 4 to 6 we are concerned with applications of our characterization results in the context of mathematical models of insider trading. We analyze extensions of the nancial equilibrium model of Kyle [42] and Back [7] where the Gaussian martingale describing the insider information is specified in various ways. In particular we discuss the structure of insider strategies which remain inconspicuous in the sense that the resulting cumulative demand is again a Brownian motion.
Lee, Chun-Sho. "A process simulation model for the manufacture of composite laminates from fiber-reinforced, polyimide matrix prepreg materials." Diss., Virginia Tech, 1993. http://hdl.handle.net/10919/40298.
Повний текст джерелаPh. D.
Hove, Darlington. "Finite element analysis of a composite sandwich beam subjected to a four point bend." Thesis, Nelson Mandela Metropolitan University, 2011. http://hdl.handle.net/10948/1465.
Повний текст джерелаMason, Brian H. "Analysis and design of composite curved frames." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-06102009-063304/.
Повний текст джерелаCarey, Mara L. "An enhanced integrated-circuit implementation of muscular contraction." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/15507.
Повний текст джерелаLe, Riche Rodolphe. "Optimization of composite structures by genetic algorithms." Diss., This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-06062008-164513/.
Повний текст джерелаAhmed, Hasim Abdalla Obaid. "Construction and analysis of efficient numerical methods to solve Mathematical models of TB and HIV co-infection." Thesis, University of the Western Cape, 2011. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_3704_1325661141.
Повний текст джерелаHolgado, Alejo J. "Construction and study of mathematical models firmly based on neurophysiological data to investigate Parkinson's disease and epilepsy." Thesis, University of Bristol, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.540899.
Повний текст джерелаChen, Jou-Jun Robert. "Load and resistance factor design of shallow foundations for bridges." Thesis, Virginia Tech, 1989. http://hdl.handle.net/10919/44627.
Повний текст джерелаLoad Factor Design (LFD), adopted by AASHTO in the mid-1970, is currently used for bridge superstructure design. However, the AASHTO specifications do not have any LFD provisions for foundations. In this study, a LFD format for the design of shallow foundations for bridges is developed.
Design equations for reliability analysis are formulated. Uncertainties in design parameters for ultimate and serviceability limit states are evaluated. A random field model is employed to investigate the combined inherent spatial variability and systematic error for serviceability limit state. Advanced first order second moment method is then used to compute reliability indices inherent in the current AASHTO specifications. Reliability indices for ultimate and serviceability limit states with different safety factors and dead to live load ratios are investigated. Reliability indices for ultimate limit state are found to be in the range of 2.3 to 3.4, for safety factors between 2 and 3. This is shown to be in good agreement with Meyerhof's conclusion (1970). Reliability indices for serviceability limit state are found to be in the range of 0.43 to 1.40, for ratios of allowable to actual settlement between 1.0 to 2.0. This appears to be in good agreement with what may be expected. Performance factors are then determined using target reliability indices selected on the basis of existing risk levels.
Master of Science
Qin, Hong. "Construction of uniform designs and usefulness of uniformity in fractional factorial designs." HKBU Institutional Repository, 2002. http://repository.hkbu.edu.hk/etd_ra/456.
Повний текст джерелаYang, Dong-Shan. "Deformation-based seismic design models for waterfront structures." Thesis, online access from Digital Dissertation Consortium access full-text, 1999. http://libweb.cityu.edu.hk/cgi-bin/er/db/ddcdiss.pl?9933214.
Повний текст джерелаRamoneda, Igor M. "Force modeling in surface grinding based on the wheel topography analysis." Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/18845.
Повний текст джерелаKlostermeier, Christian. "Investigation into the capability of large eddy simulation for turbomachinery design." Thesis, University of Cambridge, 2008. https://www.repository.cam.ac.uk/handle/1810/252106.
Повний текст джерелаSnyman, M. F. "Numerical modelling of an offshore pipeline laid from a barge." Master's thesis, University of Cape Town, 1989. http://hdl.handle.net/11427/21804.
Повний текст джерелаThis thesis addresses some of the issues involved in using numerical methods to simulate the laying of an offshore pipeline, the objective being to contribute to the expertise of the South African offshore technology. Of particular interest is the prediction of the stresses in the pipe during such an event. The thesis concentrates on the use and suitability of the finite element method to simulate the important aspects of the pipelaying problem. ABAQUS, a nonlinear general purpose finite element code, was chosen as numerical tool, and nonlinear effects such as geometry and drag, as well as contact and lift-off at the boundaries, are included in the models. The analysis is performed in two parts: in the static analysis the displaced equilibrium position of the pipeline under self weight, buoyancy and barge tension is sought, whilst the response due to wave action and barge motion is of interest in the dynamic analysis. Numerical experiments show the suitability of ABAQUS to model the behaviour of slender structures under both static loads and dynamic excitations.
Cornelissen, Belinda m. "Pre-service mathematics teachers’ engagement with the evaluation and construction of alternative mathematical models for the same phenomena." University of Western Cape, 2020. http://hdl.handle.net/11394/8172.
Повний текст джерелаThe overarching purpose of this research study was to ascertain the deliberations preservice mathematics teachers engage with when they construct alternative mathematical models for social phenomena. The study is situated within the mathematical competencies and, in particular, on the evaluation competency with the possibility of developing alternative models flowing from the evaluation. Twenty fourth-year pre-service mathematics teachers participated in the completion of three different mathematical modelling tasks on which the analysis was based. The data collected was analysed qualitatively. The researcher exploited a thematic analysis design to investigate how pre-service mathematics teachers build alternative models.
Hendrickson, Eric B. "Morphologically simplified conductance based neuron models: principles of construction and use in parameter optimization." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/33905.
Повний текст джерела