Дисертації з теми "Computers Reliability Testing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-26 дисертацій для дослідження на тему "Computers Reliability Testing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Kamara, Elisha Tingha. "Testing and inverse modelling for solder joint reliability assessment." Thesis, University of Greenwich, 2013. http://gala.gre.ac.uk/11996/.
Повний текст джерелаPowers, Brenda Joy. "A test methodology for reliability assessment of collaborative tools." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2004. http://library.nps.navy.mil/uhtbin/hyperion/04Sep%5FPowers.pdf.
Повний текст джерелаMondal, Subhajit. "Extension of E([theta]) metric for evaluation of reliability." Kansas State University, 2005. http://hdl.handle.net/2097/144.
Повний текст джерелаDepartment of Computing and Information Sciences
David A. Gustafson
The calculation of reliability based on running test cases refers to the probability of the software not generating faulty output consequent to the testing process. The metric used to measure this reliability is referred in terms of E(Θ) value. The concept of E(Θ) gives precise formulae to calculate the probability of failure of software after testing, debug or operational. This report aims at extending the functionalities of E(Θ) into the realm of multiple faults spread across multiple sub-domains. This generalization involves introduction of a new set of formulae for E(Θ) calculation which can account for faults spread over both single as well as multiple sub-domains in a code. The validity of the formulae is verified by matching the obtained theoretical results against the empirical data generated from running a test case simulator. The report further examines the possibility of an upper bound calculation on the derived formulae and its possible ramifications.
Koneru, Narendra. "Quantitative analysis of domain testing effectiveness." [Johnson City, Tenn. : East Tennessee State University], 2001. http://etd-submit.etsu.edu/etd/theses/available/etd-0404101-011933/unrestricted/koneru0427.pdf.
Повний текст джерелаVasudev, R. Sashin, and Ashok Reddy Vanga. "Accuracy of Software Reliability Prediction from Different Approaches." Thesis, Blekinge Tekniska Högskola, Avdelningen för för interaktion och systemdesign, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-1298.
Повний текст джерелаsvra06@student.bth.se
Sekgweleo, Tefo Gordon. "A decision support system framework for testing and evaluating software in organisations." Thesis, Cape Peninsula University of Technology, 2018. http://hdl.handle.net/20.500.11838/2772.
Повний текст джерелаIncreasingly, organisations in South African and across the world rely on software for various reasons, such as competitiveness and sustainability. The software are either developed in-house or purchased from the shelf. Irrespective of how the software was acquired, they do encounter challenges, from implementation to support, and use stages. The challenges sometimes hinder and are prohibitive to processes and activities that the software is intended to enable and support. Majority of the challenges that are encountered with software are attributed to the fact that they were not tested or appropriately tested before implementation. Some of the challenges has been costly to many organisations, particularly in South Africa. As a result, some organisations have been lacking in their efforts toward growth, competitiveness and sustainability. The challenges manifest from the fact that there are no testing tools and methods that can be easily customised for an organisation’s purposes. As a result, some organisations adopt more tools and methods for the same testing purposes, which has not solved the problem, as the challenges continue among South Africa organisations. Based on the challenges as stated above, this study was undertaken. The aim was to develop a decision support system framework, which can be used for software testing by any organisation, owing to its flexibility for customisation. The interpretivist and inductive approaches were employed. The qualitative methods and the case study design approach were applied. Three South African organisations, a private, public and small to medium enterprise (SME) were used as cases in this study. A set of criteria was used to select the organisations. The analysis of the data was guided by two sociotechnical theories, actor network theory (ANT) and diffusion of innovation (DOI). The theories were complementarily applied because of their different focuses. The actor network theory focuses on actors, which are both human and non-human, heterogeneity of networks, and the relationship between the actors within networks. This includes the interactions that happen at different moments as translated within the heterogeneous networks. Thus, ANT was employed to examine and gain better understanding of the factors that influence software testing in organisations. The DOI focuses on how new (fresh) ideas are diffused in an environment, with particular focus on innovation decision process, which constitute five stages: knowledge, persuasion, decision, implementation and confirmation. Findings from the data analysis of the three cases were further interpreted. Based on the interpretation, a decision support system framework was developed. The framework is intended to be of interest to software developers, software project managers and other stakeholders, most importantly, to provide guide to software testers in their tasks of testing software. Thus, this research is intended to be of interest and benefit to organisations and academic through its theoretical, practical and methodological contribution as detailed in the chapter seven (conclusion). In conclusion, even though this research is rigorous, comprehensive and holistic, there are room for future studies. I would like to propose that future research should be in the areas of measurement of software testing. Also, sociotechnical theories like structuration theory and technology acceptance model should be considered in the analysis of such studies.
Rowberry, Hayden Cole. "A Soft-Error Reliability Testing Platform for FPGA-Based Network Systems." BYU ScholarsArchive, 2019. https://scholarsarchive.byu.edu/etd/7739.
Повний текст джерелаShieh, Jung-Sheng. "Some applications of the Bechhofer-Kiefer-Sobel generalized sequential probability ratio test to software reliability testing." Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/28928.
Повний текст джерелаKwok, Wing-hong, and 郭永康. "Streamlined and prioritized hierarchical relations: a technique for improving the effectiveness of theclassification-tree methodology." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B2975107X.
Повний текст джерелаThiraviam, Amar Raja. "Accelerated life testing of subsea equipment under hydrostatic pressure." Doctoral diss., University of Central Florida, 2010. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4525.
Повний текст джерелаID: 029051131; System requirements: World Wide Web browser and PDF reader.; Mode of access: World Wide Web.; Thesis (Ph.D.)--University of Central Florida, 2010.; Includes bibliographical references (p. 165-173).
Ph.D.
Doctorate
Department of Industrial Engineering and Management Systems
Engineering and Computer Science
Classen, Elizabeth Maria. "Investigation of the optimal response scale for personality measurement : computer–based testing / Elizabeth Maria Classen." Thesis, North-West University, 2011. http://hdl.handle.net/10394/6918.
Повний текст джерелаThesis (M.Com. (Industrial Psychology))--North-West University, Potchefstroom Campus, 2012.
Sun, Boya. "PRECISION IMPROVEMENT AND COST REDUCTION FOR DEFECT MINING AND TESTING." Case Western Reserve University School of Graduate Studies / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=case1321827962.
Повний текст джерелаStoddard, Aaron Gerald. "Configuration Scrubbing Architectures for High-Reliability FPGA Systems." BYU ScholarsArchive, 2015. https://scholarsarchive.byu.edu/etd/5704.
Повний текст джерелаShewell, Justin Reed. "Hearing the Difference: A Computer-Based Speech-Perception Diagnostic Tool for Non-Native Speakers of English." Diss., CLICK HERE for online access, 2004. http://contentdm.lib.byu.edu/ETD/image/etd456.pdf.
Повний текст джерелаEllsworth, Kevin M. "Understanding Design Requirements for Building Reliable, Space-Based FPGA MGT Systems Based on Radiation Test Results." BYU ScholarsArchive, 2012. https://scholarsarchive.byu.edu/etd/3159.
Повний текст джерелаHarding, Alexander Stanley. "Single Event Mitigation for Aurora Protocol Based MGT FPGA Designs in Space Environments." BYU ScholarsArchive, 2014. https://scholarsarchive.byu.edu/etd/4117.
Повний текст джерелаHolmberg, Daniel, and Victor Nyberg. "Functional and Security Testing of a Mobile Client-Server Application." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-148710.
Повний текст джерелаBaldwin, Andrew Lockett. "A Fault-Tolerant Alternative to Lockstep Triple Modular Redundancy." PDXScholar, 2012. https://pdxscholar.library.pdx.edu/open_access_etds/331.
Повний текст джерелаPerkins, Andrew Eugene. "Investigation and Prediction of Solder Joint Reliability for Ceramic Area Array Packages under Thermal Cycling, Power Cycling, and Vibration Environments." Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/14518.
Повний текст джерелаBohman, Matthew Kendall. "Compiler-Assisted Software Fault Tolerance for Microcontrollers." BYU ScholarsArchive, 2018. https://scholarsarchive.byu.edu/etd/6724.
Повний текст джерелаMOURA, JOAO A. "Desenvolvimento e construção de sistema automatizados para controle de qualidade na produção de sementes de iodo-125." reponame:Repositório Institucional do IPEN, 2015. http://repositorio.ipen.br:8080/xmlui/handle/123456789/26454.
Повний текст джерелаMade available in DSpace on 2016-07-01T11:08:37Z (GMT). No. of bitstreams: 0
Tese (Doutorado em Tecnologia Nuclear)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
Keller, Andrew Mark. "Using On-Chip Error Detection to Estimate FPGA Design Sensitivity to Configuration Upsets." BYU ScholarsArchive, 2017. https://scholarsarchive.byu.edu/etd/6302.
Повний текст джерелаGruwell, Ammon Bradley. "High-Speed Programmable FPGA Configuration Memory Access Using JTAG." BYU ScholarsArchive, 2017. https://scholarsarchive.byu.edu/etd/6321.
Повний текст джерелаChakraborty, Ashis Kumar. "Software Quality Testing And Remedies." Thesis, 1996. http://etd.iisc.ernet.in/handle/2005/1887.
Повний текст джерела"Coverage-based testing strategies and reliability modeling for fault-tolerant software systems." Thesis, 2006. http://library.cuhk.edu.hk/record=b6074302.
Повний текст джерелаFurthermore, to investigate some "variants" as well as "invariants" of fault-tolerant software, we perform an empirical investigation on evaluating reliability features by a comprehensive comparison between two projects: our project and NASA 4-University project. Based on the same specification for program development, these two projects encounter some common as well as different features. The testing results of two comprehensive operational testing procedures involving hundreds of thousands test cases are collected and compared. Similar as well as dissimilar faults are observed and analyzed, indicating common problems related to the same application in both projects. The small number of coincident failures in the two projects, nevertheless, provide a supportive evidence for N-version programming, while the observed reliability improvement implies some trends in the software development in the past twenty years.
Motivated by the lack of real-world project data for investigation on software testing and fault tolerance techniques together, we conduct a real-world project and engage multiple programming teams to independently develop program versions based on an industry-scale avionics application. Detailed experimentations are conducted to study the nature, source, type, detectability, and effect of faults uncovered in the program versions, and to learn the relationship among these faults and the correlation of their resulting failures. Coverage-based testing as well as mutation testing techniques are adopted to reproduce mutants with real faults, which facilitate the investigation on the effectiveness of data flow coverage, mutation coverage, and fault coverage for design diversity.
Next, we investigate the effect of code coverage on fault detection which is the underlying intuition of coverage-based testing strategies. From our experimental data, we find that code coverage is a moderate indicator for the capability of fault detection on the whole test set. But the effect of code coverage on fault detection varies under different testing profiles. The correlation between the two measures is high with exceptional test cases, but weak in normal testing. Moreover, our study shows that code coverage can be used as a good filter to reduce the size of the effective test set, although it is more evident for exceptional test cases.
Software permeates our modern society, and its complexity and criticality is ever increasing. Thus the capability to tolerate software faults, particularly for critical applications, is evident. While fault-tolerant software is seen as a necessity, it also remains as a controversial technique and there is a lack of conclusive assessment about its effectiveness.
Then, based on the preliminary experimental data, further experimentation and detailed analyses on the correlations among these faults and the relation to their resulting failures are studied. The results are further applied to the current reliability modeling techniques for fault-tolerant software to examine their effectiveness and accuracy.
This thesis aims at providing a quantitative assessment scheme for a comprehensive evaluation of fault-tolerant software including reliability model comparisons and trade-off studies with software testing techniques. First of all, we propose a comprehensive procedure in assessing fault-tolerant software for software reliability engineering, which is composed of four tasks: modeling, experimentation, evaluation and economics. Our ultimate objective is to construct a systematic approach to predicting the achievable reliability based on the software architecture and testing evidences, through an investigation of testing and modeling techniques for fault-tolerant software.
Cai Xia.
"September 2006."
Adviser: Rung Tsong Michael Lyu.
Source: Dissertation Abstracts International, Volume: 68-03, Section: B, page: 1715.
Thesis (Ph.D.)--Chinese University of Hong Kong, 2006.
Includes bibliographical references (p. 165-181).
Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web.
Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web.
Abstracts in English and Chinese.
School code: 1307.
(7039253), Rakesh Kumar. "The Mystery of the Failing Jobs: Insights from Operational Data from Two University-Wide Computing Systems." Thesis, 2019.
Знайти повний текст джерела