Статті в журналах з теми "Composites de ciment – Surfaces"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Composites de ciment – Surfaces".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
CHOUGNET, Alice. "Matériaux composites ciment/polymère." Revue Européenne de Génie Civil 10, no. 8 (September 2006): 998. http://dx.doi.org/10.1080/17747120.2006.9692879.
Maciel, Lucas Campagnaro, Amanda Pádua Proeza, Hélyda Coelho Guimarães Balbino, Marcela Moráo Corteletti, Ricardo Huver De Jesus, and Laís Regiane da Silva Concílio. "Influence of Surface Treatment and Resin Cements on the Bond Strength between the Y-TZP Zirconia and Composite Resin Interface." Journal of Health Sciences 21, no. 5 (December 20, 2019): 477–82. http://dx.doi.org/10.17921/2447-8938.2019v21n5p477-482.
Houget, V., J. Ambroise, and J. Pera. "Propriétés mécaniques de composites ciment-fibres organiques." Materials and Structures 28, no. 4 (May 1995): 220–29. http://dx.doi.org/10.1007/bf02473252.
Juarez, Cesar, Gerardo Fajardo, and Pedro Valdez. "Caractérisation microstructurale des fibres naturelles pour des matériaux composites à base de ciment." Canadian Journal of Civil Engineering 36, no. 3 (March 2009): 449–62. http://dx.doi.org/10.1139/l09-009.
Bilba, Ketty, and Marie-Ange Arsène. "Etude de matériaux composites fibres de dictame/ciment." Revue des composites et des matériaux avancés 17, no. 3 (December 21, 2007): 327–50. http://dx.doi.org/10.3166/rcma.17.327-350.
Serifou, Mamery Adama, Obre Sery Paul Jolissaint, Bleh Raoul Kouassi, and Emeruwa Edjikémé. "Analyse physico-mécanique d’un composite paille de riz/ciment." Matériaux & Techniques 108, no. 2 (2020): 208. http://dx.doi.org/10.1051/mattech/2020024.
Puiatti, Daniel, Michel Lino, Pierre Cochet, and Stéphane Bonelli. "Barrages en Sol Cimenté : présentation du nouveau Bulletin 195 de la CIGB." Revue Française de Géotechnique, no. 178 (2024): 9. http://dx.doi.org/10.1051/geotech/2024012.
Chadfeau, Calypso, Sayed Hashim Mohseni, Safiullah Omary, Vincent Steiner, Essia Belhaj, Christophe Fond, and Françoise Feugeas. "Influence d’un bioadjuvant sur l’adhésion du ciment sur parois coffrantes et évaluation de l’effet de la rugosité des parois coffrantes." Matériaux & Techniques 108, no. 3 (2020): 301. http://dx.doi.org/10.1051/mattech/2020031.
Rippe, MP, R. Amaral, FS Oliveira, PF Cesar, R. Scotti, LF Valandro, and MA Bottino. "Evaluation of Tensile Retention of Y-TZP Crowns Cemented on Resin Composite Cores: Effect of the Cement and Y-TZP Surface Conditioning." Operative Dentistry 40, no. 1 (January 1, 2015): E1—E10. http://dx.doi.org/10.2341/13-310-l.
Patouillard, Sébastien, Lucile Saussaye, Alain Le Kouby, and Loïc Gervais. "Écrans d’étanchéité dans les levées de la Loire : retour d’expérience sur 10 ans de « deep soil mixing »." Revue Française de Géotechnique, no. 178 (2024): 8. http://dx.doi.org/10.1051/geotech/2024011.
Bachiorrini, A., and M. Murat. "Evolution microstructurale des composites du systeme ciment alumineux-granulat calcaire. I. Mode de propagation de la fissure." Cement and Concrete Research 17, no. 2 (March 1987): 242–48. http://dx.doi.org/10.1016/0008-8846(87)90107-4.
Gladunova, O. I., Yu E. Fedorova, O. V. Astashkina, and A. A. Lysenko. "Composites with Hydrophobic Surfaces." Fibre Chemistry 47, no. 4 (November 2015): 317–19. http://dx.doi.org/10.1007/s10692-016-9686-5.
Bachiorrini, A., and M. Murat. "Evolution microstructurale des composites du systeme ciment alumineux-granulat calcaire. II. Influence sur la porosite et les resistances mecaniques." Cement and Concrete Research 17, no. 3 (May 1987): 397–403. http://dx.doi.org/10.1016/0008-8846(87)90003-2.
KOUTOUS, Ahmed, Guillaume LACOMBE, and Ali HAMMANI. "Les « notfias » du Maroc : une technique ancestrale de collecte et stockage des eaux pluviales." Techniques Sciences Méthodes 7-8 (August 21, 2023): 87–95. http://dx.doi.org/10.36904/tsm/202307087.
French, M. A., and G. Pritchard. "The fracture surfaces of hybrid fibre composites." Composites Science and Technology 47, no. 3 (January 1993): 217–23. http://dx.doi.org/10.1016/0266-3538(93)90030-k.
Kuang, Da, Liye Xu, Lei Liu, Wenbin Hu, and Yating Wu. "Graphene–nickel composites." Applied Surface Science 273 (May 2013): 484–90. http://dx.doi.org/10.1016/j.apsusc.2013.02.066.
Luo, S. Y., and Y. S. Liao. "Observations on Fracture Surfaces of Sintered Diamond Composites." Key Engineering Materials 108-110 (July 1995): 449–50. http://dx.doi.org/10.4028/www.scientific.net/kem.108-110.449.
Nosonovsky, Michael, Vahid Hejazi, Aniedi E. Nyong, and Pradeep K. Rohatgi. "Metal Matrix Composites for Sustainable Lotus-Effect Surfaces." Langmuir 27, no. 23 (December 6, 2011): 14419–24. http://dx.doi.org/10.1021/la201656y.
Lees, W. A. "Bonding of composites: large structures and unprepared surfaces." Construction and Building Materials 5, no. 4 (December 1991): 177–87. http://dx.doi.org/10.1016/0950-0618(91)90046-n.
Friedrich, K., R. Reinicke, and Z. Zhang. "Wear of polymer composites." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 216, no. 6 (June 1, 2002): 415–26. http://dx.doi.org/10.1243/135065002762355334.
Friedrich, Klaus, and Jens Schuster. "Polymer Matrix Composites." Tribology International 29, no. 1 (February 1996): 91. http://dx.doi.org/10.1016/0301-679x(96)90013-4.
Bokobza, Liliane. "Elastomeric composites. I. Silicone composites." Journal of Applied Polymer Science 93, no. 5 (2004): 2095–104. http://dx.doi.org/10.1002/app.20684.
Karapanagiotis, Ioannis, and Panagiotis Manoudis. "Superhydrophobic surfaces." Journal of the Mechanical Behaviour of Materials 21, no. 1-2 (November 1, 2012): 21–32. http://dx.doi.org/10.1515/jmbm-2012-0022.
Tarodiya, Rahul, and Avi Levy. "Erosion of polymers and polymer composites surfaces by particles." Advanced Powder Technology 32, no. 8 (August 2021): 3149–59. http://dx.doi.org/10.1016/j.apt.2021.07.005.
Salman, K. D., and Z. M. Razlan. "Polyamide Nanofibers Reinforced Titanium Nanoparticles Composites for hydrophobic surfaces." IOP Conference Series: Materials Science and Engineering 429 (November 9, 2018): 012003. http://dx.doi.org/10.1088/1757-899x/429/1/012003.
Syromyatnikova, A., M. Safonova, and A. Fedotov. "A research of the working surfaces of abrasive composites." World Journal of Engineering 9, no. 2 (June 2012): 147–50. http://dx.doi.org/10.1260/1708-5284.9.2.147.
Chou, C.-T., U. Gaur, and B. Miller. "Evaluation of Fracture Surfaces in Carbon Fiber/Epoxy Composites." Journal of Adhesion 40, no. 2-4 (May 1993): 245–56. http://dx.doi.org/10.1080/00218469308031287.
Rout, J., M. Misra, A. K. Mohanty, S. K. Nayak, and S. S. Tripathy. "SEM Observations of the Fractured Surfaces of Coir Composites." Journal of Reinforced Plastics and Composites 22, no. 12 (August 2003): 1083–100. http://dx.doi.org/10.1177/0731684403027377.
Sgriccia, N., M. C. Hawley, and M. Misra. "Characterization of natural fiber surfaces and natural fiber composites." Composites Part A: Applied Science and Manufacturing 39, no. 10 (October 2008): 1632–37. http://dx.doi.org/10.1016/j.compositesa.2008.07.007.
Azizi, Reza, Christian F. Niordson, and Brian Nyvang Legarth. "Size-effects on yield surfaces for micro reinforced composites." International Journal of Plasticity 27, no. 11 (November 2011): 1817–32. http://dx.doi.org/10.1016/j.ijplas.2011.05.006.
Song, Hyon Min, Peide D. Ye, and Albena Ivanisevic. "Elastomeric Nanoparticle Composites Covalently Bound to Al2O3/GaAs Surfaces." Langmuir 23, no. 18 (August 2007): 9472–80. http://dx.doi.org/10.1021/la700979r.
Vidholdová, Zuzana, Ján Iždinský, Ladislav Reinprecht, and Jana Krokošová. "Activity of Bacteria and Moulds on Surfaces of Commercial Wooden Composites." Materials Science Forum 818 (May 2015): 190–93. http://dx.doi.org/10.4028/www.scientific.net/msf.818.190.
Xiao, Peng, and Zhi Kang Fan. "Vacuum Breakdown Behavior of CuWCr Composites." Materials Science Forum 569 (January 2008): 125–28. http://dx.doi.org/10.4028/www.scientific.net/msf.569.125.
Chang, Shou-Yi, Chia-Jung Hsu, Cher-Hao Hsu, and Su-Jien Lin. "Investigation on the arc erosion behavior of new silver matrix composites: Part I. Reinforced by particles." Journal of Materials Research 18, no. 4 (April 2003): 804–16. http://dx.doi.org/10.1557/jmr.2003.0111.
Evon, Philippe. "Special Issue “Natural Fiber Based Composites”." Coatings 11, no. 9 (August 27, 2021): 1031. http://dx.doi.org/10.3390/coatings11091031.
Guicciardi, Stefano, Laura Silvestroni, Cesare Melandri, Diletta Sciti, and Giuseppe Pezzotti. "Nanoindentation characterisation of HfC-based composites." International Journal of Surface Science and Engineering 1, no. 2/3 (2007): 198. http://dx.doi.org/10.1504/ijsurfse.2007.015025.
Belo, Samuel, Francisca Sousa-Cardoso, Rita Teixeira-Santos, Luciana C. Gomes, Rita Vieira, Jelmer Sjollema, Olívia S. G. P. Soares, and Filipe J. Mergulhão. "Production and Characterization of Graphene Oxide Surfaces against Uropathogens." Coatings 13, no. 8 (July 28, 2023): 1324. http://dx.doi.org/10.3390/coatings13081324.
Di, Ming Wei, and Yang Liu. "Stability and Ageing of Plasma Treated Wood/Polyethylene Composites Surfaces." Advanced Materials Research 150-151 (October 2010): 829–33. http://dx.doi.org/10.4028/www.scientific.net/amr.150-151.829.
Calame, Jeffrey, and Morag Garven. "Dielectric permittivity simulations of layered composites with rough interfacial surfaces." IEEE Transactions on Dielectrics and Electrical Insulation 14, no. 2 (April 2007): 287–95. http://dx.doi.org/10.1109/tdei.2007.344605.
Cao, Zheng, Yanchao Hu, Ying Lu, Yinglin Xiong, An Zhou, Cheng Zhang, Dun Wu, and Chunlin Liu. "Laser-induced blackening on surfaces of thermoplastic polyurethane/BiOCl composites." Polymer Degradation and Stability 141 (July 2017): 33–40. http://dx.doi.org/10.1016/j.polymdegradstab.2017.05.004.
Miguez Suarez, João Carlos, Fernanda M. B. Coutinho, and Thaís H. Sydenstricker. "SEM studies of tensile fracture surfaces of polypropylene—sawdust composites." Polymer Testing 22, no. 7 (October 2003): 819–24. http://dx.doi.org/10.1016/s0142-9418(03)00017-5.
Gadalla, A. M., and N. F. Petrofes. "SURFACES OF ADVANCED CERAMIC COMPOSITES FORMED BY ELECTRICAL DISCHARGE MACHINING." Materials and Manufacturing Processes 5, no. 2 (January 1990): 253–71. http://dx.doi.org/10.1080/10426919008953246.
Dinu, Cerasela Zoica, Guangyu Zhu, Shyam Sundhar Bale, Gaurav Anand, Philippa J. Reeder, Karl Sanford, Gregg Whited, Ravi S. Kane, and Jonathan S. Dordick. "Enzyme-Based Nanoscale Composites for Use as Active Decontamination Surfaces." Advanced Functional Materials 20, no. 3 (February 8, 2010): 392–98. http://dx.doi.org/10.1002/adfm.200901388.
Watazu, Akira, Kay Teraoka, Hirofumi Kido, Kenzo Morinaga, Kae Okamatsu, Yoshiyuki Nagashima, Masaro Matsuura, and Naobumi Saito. "Formation of Titanium Oxide/Titanium/Plastic Composites." Key Engineering Materials 361-363 (November 2007): 487–90. http://dx.doi.org/10.4028/www.scientific.net/kem.361-363.487.
Абразумов, В. В., and Б. Л. Спирин. "Features of mechanical processing of wood composites." Informacionno-technologicheskij vestnik, no. 2(28) (June 17, 2021): 148–55. http://dx.doi.org/10.21499/2409-1650-2021-28-2-148-155.
Wang, Da Zhen, Pei Feng Feng, and Ling You. "Effect of Reinforcements on the Ultraprecision Performance of SiC Reinforced Aluminium Matrix Composites." Advanced Materials Research 154-155 (October 2010): 1342–47. http://dx.doi.org/10.4028/www.scientific.net/amr.154-155.1342.
Jyothi, Ms A. Lalitha, Stanley Ebenezer Nitla, Yakobu Gaddepalli, Prabhash K, Veerendra G, and Durga Prasad M. "Hydrophobic Coating on Metal Matrix Composites." International Journal for Research in Applied Science and Engineering Technology 12, no. 5 (May 31, 2024): 5260–67. http://dx.doi.org/10.22214/ijraset.2024.62802.
Dikova, Tsanka, Jordan Maximov, Vladimir Todorov, Georgi Georgiev, and Vladimir Panov. "Optimization of Photopolymerization Process of Dental Composites." Processes 9, no. 5 (April 28, 2021): 779. http://dx.doi.org/10.3390/pr9050779.
Thiagarajan, C., R. Sivaramakrishnan, and S. Somasundaram3. "Cylindrical grinding of Al/SiC metal matrix composites." Material Science Research India 7, no. 2 (February 8, 2010): 425–33. http://dx.doi.org/10.13005/msri/070212.
Gun’ko, V. M., V. M. Bogatyrov, O. I. Oranska, L. I. Borysenko, J. Skubiszewska-Zięba, A. Książek, and R. Leboda. "Structural features of ZnxOy/nanosilica composites." Applied Surface Science 276 (July 2013): 802–9. http://dx.doi.org/10.1016/j.apsusc.2013.04.002.