Добірка наукової літератури з теми "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))":
Subagia, I. D. G. Ary, and Yonjig Kim. "Tensile behavior of hybrid epoxy composite laminate containing carbon and basalt fibers." Science and Engineering of Composite Materials 21, no. 2 (March 1, 2014): 211–17. http://dx.doi.org/10.1515/secm-2013-0003.
Khan, Mohammad K. A., Harri Junaedi, Hassan Alshahrani, Ahmed Wagih, Gilles Lubineau, and Tamer A. Sebaey. "Enhanced Open-Hole Strength and Toughness of Sandwich Carbon-Kevlar Woven Composite Laminates." Polymers 15, no. 10 (May 11, 2023): 2276. http://dx.doi.org/10.3390/polym15102276.
Ismail*, Mohd Fadzli, and Aidah Jumahat. "Impact Properties of Hybrid Fibre Reinforced Polymer Composite Laminates." International Journal of Innovative Technology and Exploring Engineering 9, no. 3 (January 30, 2020): 2763–66. http://dx.doi.org/10.35940/ijitee.c9206.019320.
Sun, Jinru, Xuanjiannan Li, Xiangyu Tian, Jingliang Chen, and Xueling Yao. "Dynamic electrical characteristics of carbon fiber-reinforced polymer composite under low intensity lightning current impulse." Advanced Composites Letters 29 (January 1, 2020): 2633366X2094277. http://dx.doi.org/10.1177/2633366x20942775.
Liu, J. A., Z. Q. Dong, X. Y. Zhu, W. B. Sun, and Z. Q. Huang. "Flexural properties of lightweight carbon fiber/epoxy resin composite sandwiches with different fiber directions." Materials Research Express 9, no. 2 (February 1, 2022): 026506. http://dx.doi.org/10.1088/2053-1591/ac4dc5.
CASAPU, Maria, Michel ARRIGONI, and Ion FUIOREA FUIOREA. "Off-axis response and shear characterization of unidirectional ply-level hybrid carbon-fiber-reinforced polymer materials." INCAS BULLETIN 15, no. 3 (September 4, 2023): 31–46. http://dx.doi.org/10.13111/2066-8201.2023.15.3.3.
Hu, Junfeng, Xutong Zhang, Zhou Chen, Wenkang Guo, Hang Li, and Xi Deng. "Experimental and Numerical Research on Open-Hole Strength and Damage Mechanism of Regularly Arrayed Short Fiber Reinforced Polymer Composite." Polymers 12, no. 7 (July 21, 2020): 1622. http://dx.doi.org/10.3390/polym12071622.
Yousuf, Aquib Bin, Sajjid Hasan Asif, Md Jalal Uddin Rumi, and Kamrul Hasan. "Progressive Failure Analysis of Carbon Fiber Reinforced Polymer Composite with a Circular Notch by Varying Fiber Orientation." IOP Conference Series: Materials Science and Engineering 1305, no. 1 (April 1, 2024): 012019. http://dx.doi.org/10.1088/1757-899x/1305/1/012019.
Manomaisantiphap, Siwat, Vipin Kumar, Takao Okada, and Tomohiro Yokozeki. "Electrically conductive carbon fiber layers as lightning strike protection for non-conductive epoxy-based CFRP substrate." Journal of Composite Materials 54, no. 29 (June 24, 2020): 4547–55. http://dx.doi.org/10.1177/0021998320935946.
Zhong, Yu Cheng, and Sunil Chandrakant Joshi. "Diffusion Characteristics of Moisture in Polymer Composites under Different Hygrothermal Conditions." Advanced Materials Research 849 (November 2013): 69–74. http://dx.doi.org/10.4028/www.scientific.net/amr.849.69.
Дисертації з теми "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))":
Pandolfi, Carlo. "Experimental characterization of carbon-fiber-reinforced polymer laminates." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amslaurea.unibo.it/9777/.
Lee, Tuan Kuan 1976. "Shear strength of reinforced concrete T-beams strengthened using carbon fibre reinforced polymer (CFRP) laminates." Monash University, Dept. of Civil Engineering, 2003. http://arrow.monash.edu.au/hdl/1959.1/6647.
Angelidis, Nikolaos. "Damage sensing in CFRP composites using electrical potential techniques." Thesis, Cranfield University, 2004. http://dspace.lib.cranfield.ac.uk/handle/1826/127.
Deng, Jiangang. "Durability of carbon fiber reinforced polymer (CFRP) repair/strengthening concrete beams." Laramie, Wyo. : University of Wyoming, 2008. http://proquest.umi.com/pqdweb?did=1663060011&sid=2&Fmt=2&clientId=18949&RQT=309&VName=PQD.
Curnutt, Austin. "Research on the mechanics of CFRP composite lap joints." Thesis, Kansas State University, 2017. http://hdl.handle.net/2097/38191.
Department of Architectural Engineering
Donald J. Phillippi
For this thesis, research was performed on CFRP bonded composite lap-joints with one and two continuous laminas through the lap. Composite wraps used to retrofit existing structures use lap joints to maintain their integrity. The use of composites for retrofitting structures has many advantages over traditional methods, such as steel jacketing, and is becoming more widely accepted in the structural engineering industry. While much literature exists documenting the performance of composite wraps as a whole when applied to concrete columns, less information is available on the behavior of the lap-joint of the wrap. Developing a better understanding of how the lap-joint behaves will help researchers further understand composite column wraps. This research sought to determine what affect continuous middle laminas may have on the stiffness of lap joints and whether or not stress concentrations exist in the lap-joint due to a change in stiffness.
Kergosien, Nina. "Instrumentation de plaque composite de type aéronautique pour le contrôle santé intégré." Electronic Thesis or Diss., Ecully, Ecole centrale de Lyon, 2024. http://www.theses.fr/2024ECDL0008.
SHM systems are currently being developed to check the integrity of aircraft composite materials. These systems will help optimize maintenance by enabling real-time monitoring of structural condition, or spot-checking of parts that are difficult to access using conventional NDT methods. Composite materials offer the possibility of integrating a SHM system directly into the material. In this way, the instrumentation is protected from the environment and surface bonding issues are resolved. The aim of this thesis is to determine the effects of integrating piezoelectric transducers into the core of an aeronautical laminated CFRP composite on their Lamb-wave emission and reception abilities, in order to demonstrate the advantages and disadvantages for the design of a defect detection SHM system. Thin PZT transducers proved to be the most suitable ones for integration, as they can withstand the processing conditions of an autoclave-processed composite (7 bar and 180°C). They are also capable of transmitting and receiving guided waves, which are propagating in the plates. Moreover, the integration method was adapted to preserve the integrity of the PZTs and to optimize their ability to transmit waves in a composite. In order to assess the effectiveness of the integration, electromechanical impedance measurements were made a fast checking process. Characterization of qA0 mode wavefield transmitted by embedded PZT was carried out experimentally. Surface-bonded and embedded PZT were excited at frequencies between 30 and 200 kHz, while out-of-plane displacements were measured with a laser vibrometer. The ability of the embedded PZT to detect a simulated magnet-type defect are also studied in pitch-catch tests, and compared with the behavior of surface-bonded PZT to the composite surface. A dynamic finite element modelling study was then conducted to highlight the physical phenomena induced by the integration of a PZT in the composite core. The direction of the plies in contact with the embedded PZT, the depth of integration and the coupling of the PZT with the composite are influencing the ultrasonic transduction mechanism. Furthermore, it appears that the stresses induced by the PZT actuator cannot be simplified by the pin-force model usually used to load a PZT on an isotropic material surface in flaw detection models. These stresses are not radially oriented and depend on the PZT electrode considered, as well as on the wave generation frequencies
Olka, Michael. "FLEXURAL MECHANICAL DURABILITY OF CONCRETE BEAMS STRENGTHENED BY EXTERNALLY BONDED CARBON FIBER REINFORCED POLYMER SHEETS." Master's thesis, University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3120.
M.S.
Department of Civil and Environmental Engineering
Engineering and Computer Science
Civil Engineering MS
Barberio, Francesco. "Nanofibre contenenti grafene per la modifica di compositi laminati: ottimizzazione del processo di elettrofilatura." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/20745/.
Dawood, Mina Magdy Riad. "Fundamental Behavior of Steel-Concrete Composite Beams Strengthened with High Modulus Carbon Fiber Reinforced Polymer (CFRP) Materials." NCSU, 2005. http://www.lib.ncsu.edu/theses/available/etd-06292005-192140/.
Huang, Jia. "Rapid determination of fatigue behaviour for carbon fiber reinforced polymer laminates based on thermodynamic phenomena observed by IR thermography." Thesis, Toulouse 3, 2019. http://www.theses.fr/2019TOU30033.
In order to achieve weight reduction of composite structures and reduce manufacturing and operating costs, fatigue behavior of Carbon Fiber Reinforced Polymer (CFRP) laminates has received more and more attention. The objectives of this thesis are to develop methodologies to evaluate the fatigue behavior of CFRP laminates in a short time based on the analysis of thermodynamic data measured by an infrared camera and to investigate the inherent correlation between energy dissipation and fatigue damage. Three new numerical methods based on statistical analysis for the treatment of the thermal data are firstly proposed to avoid man-made uncertainties in the traditional graphic methods such as Luong's method and Risitano's method. Those proposed methods are all evaluated by the experimental data from literature to determine the fatigue limit with uniqueness. Then, a two-parameter model is proposed to characterize the stiffness degradation of CFRP laminates with the increase of cycle numbers. After the calibration of parameters and the calculation of the normalized failure threshold stiffness, the whole S-N curve can be obtained in a very short time. Thereafter, the relationship between fatigue damage and heat generation is studied. Depending on the different causes, the generated heat is classified into two parts - induced by internal friction and induced by damage accumulation. The total heat generation corresponding to damage appears to be independent of loading amplitude, and this conclusion can also be used to predict the S-N curve with good precision
Книги з теми "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))":
Fawzia, Sabrina. Bond characteristics between steel and carbon fibre reinforced polymer (CFRP) composites. 2007.
Частини книг з теми "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))":
Al-Rousan, Rajai Z., Khairedin M. Abdalla, and Bara’a R. Alnemrawi. "The Behavior of Heat-Damaged RC Beams Reinforced Internally with CFRP Strips." In Lecture Notes in Civil Engineering, 165–74. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-57800-7_15.
Ozkan, Dervis, Mustafa Sabri Gok, and Abdullah Cahit Karaoglanli. "Carbon Fiber Reinforced Polymer (CFRP) Composite Materials, Their Characteristic Properties, Industrial Application Areas and Their Machinability." In Advanced Structured Materials, 235–53. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-39062-4_20.
Lu, Guangchen, Yinhang Ma, Minyang Wu, Boshuo Yang, Liu Liu, and Fujun Yang. "Mechanical Characterization of Laminated Carbon Fiber Reinforced Polymer." In Advances in Transdisciplinary Engineering. IOS Press, 2023. http://dx.doi.org/10.3233/atde230162.
Chen, Quanshi, Yanwei Xu, Wensheng Li, Chao Shen, Shiguang Chen, and Hao Li. "Investigation of the Influence of Delamination Characteristics on the Mechanical Properties of CFRP." In Advances in Transdisciplinary Engineering. IOS Press, 2023. http://dx.doi.org/10.3233/atde230165.
Sahoo, Pradeep Kumar, and Bikash Kumar Pradhan. "FE-BASED FATIGUE ANALYSIS OF UNNOTCHED COMPOSITE LAMINATE USING STIFFNESS DEGRADATION APPROACH." In Futuristic Trends in Mechanical Engineering Volume 3 Book 6, 15–34. Iterative International Publisher, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3bgme6p1ch2.
Acharya, Aniket, Anant Kumar Singh, Aayaam Agarwal, and Vikas Rastogi. "Analysis of Delamination Damage and Eigenvalue Buckling of Lap Joint in CFRP Laminates Using Finite Element Method." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220814.
Al-Abdwais, Ahmed H., Riadh S. Al-Mahaidi, and Adil K. Al-Tamimi. "Bond Strength of NSM CFRP Textile and Concrete Using Modified Cement-Based Adhesive at High Temperature Site Exposure." In Advances in Transdisciplinary Engineering. IOS Press, 2023. http://dx.doi.org/10.3233/atde230760.
Gangu Naidu, Challa, Challa V. V. Ramana, Yarraguntla Srinivasa Rao, Kollabathula Vara Prasada Rao, Dadi Vasudha, Gandi Anusha, and Koppisetty B. Rajeshbabu. "A Concise Review on Carbon Fiber-Reinforced Polymer (CFRP) and their Mechanical Significance Including Industrial Applications." In Carbon Nanotubes - Recent Advances, New Perspectives and Potential Applications [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.109339.
Olofin, IfeOlorun, and Ronggui Liu. "The Effect of Temperature on the Mechanical Performance of Steel and Carbon Fiber Reinforced Polymer (CFRP) Tensegrity System." In Composite Materials [Working Title]. IntechOpen, 2019. http://dx.doi.org/10.5772/intechopen.90010.
Shakouri Mahmoudabadi, Nasim, and Charles V. Camp. "Rapid Analysis of CFRP-Reinforced Concrete Structures Using Artificial Neural Networks." In Advanced Optimization Applications in Engineering, 60–96. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-2161-4.ch004.
Тези доповідей конференцій з теми "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))":
BHAGANAGAR, SIDDHARTH, PIAS KUMAR BISWAS, MANGILAL AGARWAL, and HAMID DALIR. "CELLULOSE NANOFIBERS (CNF) REINFORCED CARBON FIBER/EPOXY MATRIX COMPOSITE WITH HIGHER MECHANICAL PROPERTIES." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36405.
Liping, Zhao, Pang Boon Inn, and Zhong Zhaowei. "Thermal wavefront sensing for defect inspection of carbon fiber reinforced polymer (CFRP) composite laminate." In 2012 Quantitative InfraRed Thermography. QIRT Council, 2012. http://dx.doi.org/10.21611/qirt.2012.377.
Akter, Rizwana, and Oliver J. Myers. "Fabrication of a 3D Bistable Composite." In ASME 2020 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/smasis2020-2365.
LABIK, TIM ,., JONATHAN AWERBUCH, and TEIN-MIN TAN. "FAILURE PREDICTION IN LARGE SCALE COMPOSITE LAMINATES CONTAINING BONDED REPAIRS." In Proceedings for the American Society for Composites-Thirty Eighth Technical Conference. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/asc38/36584.
Yousefpour, Kamran, Wenhua Lin, Yeqing Wang, and Chanyeop Park. "Protection of Carbon Fiber Reinforced Polymer Matrix (CFRP) Composite Laminate Against Lightning Strike Using Nano-Fillers." In 2020 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE, 2020. http://dx.doi.org/10.1109/ceidp49254.2020.9437508.
ANDREOZZI, M. "Effect of carbon nanotube content on the mechanical behaviour of CFRP composite materials." In Italian Manufacturing Association Conference. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902714-41.
Jafarli, Ilgar, and Umesh-Haribhai Vavaliya. "Mechanical behavior of I-beams reinforced by unidirectional carbon fibre, unidirectional glass fiber and carbon fibre laminates." In 22nd International Scientific Conference Engineering for Rural Development. Latvia University of Life Sciences and Technologies, Faculty of Engineering, 2023. http://dx.doi.org/10.22616/erdev.2023.22.tf144.
Kotikalapudi, Sai Tharun, and Raman P. Singh. "Mechanical Strength Degradation of Carbon Fiber Polymer Matrix Composites Exposed to Constant Low-Density Direct Current." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-12259.
Meon, Mohd Suhairil. "Finite Element Analysis of Low-Velocity Impact Carbon Fiber-Reinforced Polymer (CFRP) Composite Laminate Emphasizing on Meshing Technique." In International Conference on Nanoscience and Nanotechnology 2022. Switzerland: Trans Tech Publications Ltd, 2023. http://dx.doi.org/10.4028/p-9hbg70.
Parandoush, Pedram, Timothy Deines, Dong Lin, Hao Zhang, and Chang Ye. "Mechanical Finishing of 3D Printed Continuous Carbon Fiber Reinforced Polymer Composites via CNC Machining." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2972.
Звіти організацій з теми "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))":
Wang, Hao, Milad Salemi, Jiaqi Chen, P. N. Balaguru, Jinhao Liang, and Ning Xie. DTPH56-15H-CAP04L An Inorganic Composite Coating for Pipeline Rehabilitation and Corrosion Protection. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), December 2018. http://dx.doi.org/10.55274/r0011991.