Добірка наукової літератури з теми "Component lifing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Component lifing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Component lifing"
Pickard, A. C. "Component lifing." Materials Science and Technology 3, no. 9 (September 1987): 743–48. http://dx.doi.org/10.1179/mst.1987.3.9.743.
Повний текст джерелаWhitney-Rawls, Ashley, Paul Copp, Jace Carter, and Tarun Goswami. "Comparison of aero engine component lifing methods." Materials Engineering Research 4, no. 1 (2022): 201–22. http://dx.doi.org/10.25082/mer.2022.01.003.
Повний текст джерелаPivovarova, M. V., and I. L. Gladkiy. "Life of gas turbine engine components under corrosive exposure." VESTNIK of Samara University. Aerospace and Mechanical Engineering 18, no. 3 (October 31, 2019): 109–17. http://dx.doi.org/10.18287/2541-7533-2019-18-3-109-117.
Повний текст джерелаKorsunsky, Alexander M., Daniele Dini, and Michael J. Walsh. "Fatigue Crack Growth Rate Analysis in a Titanium Alloy." Key Engineering Materials 385-387 (July 2008): 5–8. http://dx.doi.org/10.4028/www.scientific.net/kem.385-387.5.
Повний текст джерелаBiglari, Farid R., and Kamran M. Nikbin. "Numerical predictions of carburisation and crack evolution using a combined diffusion rate and remaining multi-axial creep ductility damage model." International Journal of Damage Mechanics 26, no. 6 (January 28, 2016): 859–80. http://dx.doi.org/10.1177/1056789516628317.
Повний текст джерелаBusse, Christian, Frans Palmert, Paul Wawrzynek, Björn Sjödin, David Gustafsson, and Daniel Leidermark. "Crystallographic crack propagation rate in single-crystal nickelbase superalloys." MATEC Web of Conferences 165 (2018): 13012. http://dx.doi.org/10.1051/matecconf/201816513012.
Повний текст джерелаBache, Martin R., Christopher D. Newton, John Paul Jones, Stephen Pattison, Louise Gale, Pascual Ian Nicholson, and Eleri Weston. "Advances in Damage Monitoring Techniques for the Detection of Failure in SiCf/SiC Ceramic Matrix Composites." Ceramics 2, no. 2 (May 15, 2019): 347–71. http://dx.doi.org/10.3390/ceramics2020028.
Повний текст джерелаSchwagenscheidt, Markus, and Fabian Völz. "Lifting newforms to vector-valued modular forms for the Weil representation." International Journal of Number Theory 11, no. 07 (October 21, 2015): 2199–219. http://dx.doi.org/10.1142/s1793042115500980.
Повний текст джерелаPonidi, Ponidi, and Ali Makhfud. "Predictive Maintenance Implementation In Reach Stacker Kalmar Type Drd To Reduce Component Failure." R.E.M. (Rekayasa Energi Manufaktur) Jurnal 3, no. 1 (October 11, 2018): 29. http://dx.doi.org/10.21070/r.e.m.v3i1.1538.
Повний текст джерелаSchupp, Sibylle. "Lifting a Butterfly – A Component-Based FFT." Scientific Programming 11, no. 4 (2003): 291–307. http://dx.doi.org/10.1155/2003/918501.
Повний текст джерелаДисертації з теми "Component lifing"
You, Chao. "Fatigue lifing approaches for shot peened turbine components." Thesis, University of Southampton, 2017. https://eprints.soton.ac.uk/415882/.
Повний текст джерелаAbdallah, Zakaria. "Creep lifing methods for components under high temperature creep." Thesis, Swansea University, 2010. https://cronfa.swan.ac.uk/Record/cronfa43065.
Повний текст джерелаMorgans, Christopher. "Defect tolerant lifing of airframe components and the influence of corrosion damage." Thesis, Swansea University, 2007. https://cronfa.swan.ac.uk/Record/cronfa42774.
Повний текст джерелаSouahi, A. "Structural optimization of aircraft lifting surfaces to satisfy flutter requirements." Thesis, Cranfield University, 1986. http://hdl.handle.net/1826/3657.
Повний текст джерелаOzaltun, Hakan. "An Energy Based Fatigue Lifing Method for In-Service Components and Numerical Assessment of U10Mo Alloy Based Fuel Mini Plates." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1309210033.
Повний текст джерелаSheppard, Phillip S. "Sex-Based Differences In Lifting Technique Under Increasing Load Conditions: A Principal Component Analysis." Thesis, 2012. http://hdl.handle.net/1974/7574.
Повний текст джерелаThesis (Master, Kinesiology & Health Studies) -- Queen's University, 2012-10-03 21:10:11.889
SADLER, ERIN. "PRINCIPAL COMPONENT ANALYSES OF JOINT ANGLE CURVES TO EXAMINE LIFTING TECHNIQUE." Thesis, 2010. http://hdl.handle.net/1974/5976.
Повний текст джерелаThesis (Master, Kinesiology & Health Studies) -- Queen's University, 2010-08-18 09:35:19.142
(8741097), Ritwik Bandyopadhyay. "ENSURING FATIGUE PERFORMANCE VIA LOCATION-SPECIFIC LIFING IN AEROSPACE COMPONENTS MADE OF TITANIUM ALLOYS AND NICKEL-BASE SUPERALLOYS." Thesis, 2020.
Знайти повний текст джерелаDesmoulins, Landry. "Modélisation et analyses cinématiques de l'épaule lors de levers de charges en hauteur." Thèse, 2016. http://hdl.handle.net/1866/18528.
Повний текст джерелаAn occupation that requires handling loads combined with large elevation of the arms is associated with the occurrence of shoulders musculoskeletal disorder. The analysis of these joint movements is essential because it helps to quantify the stress applied to the musculoskeletal structures. This thesis provides an innovative model which allows the estimation of the shoulder complex kinematics and used it to analyze the joints kinematics during lifting tasks. It is organized into three sub-objectives. The first aim is the development and validation of a kinematic model the most representative as possible of the shoulder complex anatomy while correcting soft tissue artifacts through the use of global optimization. This model included a scapulothoracic closed loop, which constrains a scapular dot contact to be coincident with thoracic gliding plane modeled by a subject-specific ellipsoid. In the validation process, the reference model used the gold standard for direct measurements of bone movements. In dynamic movements, the closed loop model developed generates barely more kinematic errors that errors obtained for the study of standard movements by existing models. The second aim is to detect and quantify the shoulder articular movements influenced by the combined effects of two risk factors: task height and load weight. The results indicate that many peaks of joint angles are influenced by the interaction of height and weight. According to the different initial and deposits heights when the weight increases, the kinematics changes are substantial, in number and magnitude. The kinematic strategies of participants are more consistent when the weight of load increase for initial height lift at hips level compared to shoulders level, and for a deposit at eye level compared to shoulders. The third aim is to investigate the magnitude and temporality of the maximum peak vertical acceleration of the box. The significant joints movements are characterized with a principal component analysis of joint angle values collected at this instant. In particular, this study highlights that elbow flexion and thoraco-humeral elevation are two correlated invariant joint movements to all lifting tasks whatever the initial and deposit height, and weight of the load. The realism of the developed shoulder model and kinematics analyzes open perspectives in occupational biomechanics and contribute to risk prevention efforts in health and safety.
Une activité professionnelle qui exige de manipuler des charges combinée à de grandes élévations des bras augmente les chances de développer un trouble musculo-squelettique aux épaules. L’analyse de ces mouvements articulaires est essentielle car elle contribue à quantifier les contraintes appliquées aux structures musculo-squelettiques. Cette thèse propose un modèle innovant qui permet l’estimation de la cinématique du complexe de l’épaule, et l’utilise ensuite afin d’analyser la cinématique de levers de charge. Elle s’organise en trois sous-objectifs. Le premier concerne le développement et la validation d’un modèle cinématique le plus représentatif possible de l’anatomie du complexe de l’épaule tout en corrigeant les artéfacts des tissus mous par une optimisation multi-segmentaire. Ce modèle avec une fermeture de boucle scapulo-thoracique, impose à un point de contact scapulaire d’être coïncident au plan de glissement thoracique modélisé par un ellipsoïde mis à l’échelle pour chaque sujet. Le modèle qui a été utilisé comme référence lors des comparaisons du processus de validation bénéficie du « gold standard » de mesures directes des mouvements osseux. Le modèle développé en boucle fermée génère à peine plus d’erreurs cinématiques lors de mouvements dynamiques que les erreurs obtenues par les modèles existants pour l’étude de mouvements standards. Le second identifie et quantifie les mouvements articulaires de l’épaule influencés par la combinaison des effets de deux facteurs de risques : les hauteurs importantes d’agencement de la tâche (hauteurs de saisie et de dépôt) et les masses de charges (6 kg, 12 kg et 18 kg). Les résultats indiquent qu’il existe de nombreux pics d’angles articulaires qui sont influencés par l’interaction des deux effets. Lorsque la masse augmente, les modifications cinématiques sont plus importantes, en nombre et en amplitude, selon les différentes hauteurs de saisies et de dépôts de la charge. Les participants varient peu leur mode opératoire pour une saisie à hauteur des hanches en comparaison des épaules, et pour un dépôt à hauteur des yeux en comparaison aux épaules avec une charge plus lourde. Un troisième s’intéresse au pic maximal d’accélération verticale de la charge dans son intensité et sa temporalité. Basée sur une analyse en composante principale des valeurs d’angles articulaires à cet instant, elle permet de caractériser les mouvements articulaires significatifs. Cette étude met notamment en évidence que la flexion du coude et l’élévation thoraco-humérale sont deux mouvements articulaires corrélés invariants à toutes les tâches de lever en hauteur quelles que soient la hauteur de dépôt et la masse de la charge. Le souci de réalisme du modèle développé et les analyses cinématiques menées ouvrent des perspectives en biomécanique occupationnelle et participent à l’effort de prévention des risques en santé et sécurité.
Книги з теми "Component lifing"
Wanhill, Russell, Simon Barter, and Loris Molent. Fatigue Crack Growth Failure and Lifing Analyses for Metallic Aircraft Structures and Components. Dordrecht: Springer Netherlands, 2019. http://dx.doi.org/10.1007/978-94-024-1675-6.
Повний текст джерелаMurphy, James R. The Martian dust cycle: Investigation of the surface lifting component : final report, interchange # NCC2-5076 (22 July 1994 - 21 July 1996). [Washington, DC: National Aeronautics and Space Administration, 1996.
Знайти повний текст джерелаWanhill, Russell, Simon Barter, and Loris Molent. Fatigue Crack Growth Failure and Lifing Analyses for Metallic Aircraft Structures and Components. Springer, 2019.
Знайти повний текст джерелаReaction time components under resisted and unresisted conditions as a function of gains in strength. 1985.
Знайти повний текст джерелаAdeyanju, Kunle. Reaction time components under resisted and unresisted conditions as a function of gains in strength. 1985.
Знайти повний текст джерелаAdeyanju, Kunle. Reaction time components under resisted and unresisted conditions as a function of gains in strength. 1985.
Знайти повний текст джерелаЧастини книг з теми "Component lifing"
Harrison, G. F., and P. H. Tranter. "Stressing and Lifing Techniques for High Temperature Aeroengine Components." In Mechanical Behaviour of Materials at High Temperature, 327–45. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-1714-9_18.
Повний текст джерелаLonguet, Arnaud, Christian Dumont, and Eric Georges. "Advanced Modeling Tools for Processing and Lifing of Aeroengine Components." In Superalloys 2020, 3–15. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-51834-9_1.
Повний текст джерелаAkyuz, Burak, and Nicholas Steinhoff. "Failures of Cranes and Lifting Equipment." In Analysis and Prevention of Component and Equipment Failures, 415–34. ASM International, 2021. http://dx.doi.org/10.31399/asm.hb.v11a.a0006830.
Повний текст джерелаDu, Wenwen, Xiaofei Xu, and Haroon Rashid. "The Analysis of Key Components Structure of Vehicle Thermal Balance Lifting Platform." In Proceedings of the 2022 International Conference on Smart Manufacturing and Material Processing (SMMP2022). IOS Press, 2022. http://dx.doi.org/10.3233/atde220834.
Повний текст джерелаHeuler, P., J. W. Bergmann, and M. Vormwald. "On Lifing Concepts for Cast High Temperature Components Based on LCF and Fracture Mechanics." In Fatigue '96, 1165–70. Elsevier, 1996. http://dx.doi.org/10.1016/b978-008042268-8/50067-8.
Повний текст джерела"Method for Semantic Annotation and Lifting of Process Models." In Applications and Developments in Semantic Process Mining, 135–67. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-2668-2.ch005.
Повний текст джерелаKnight, Alan. "4. Counter-revolution and Constitutionalism (1913–1914)." In The Mexican Revolution: A Very Short Introduction, 43–54. Oxford University Press, 2016. http://dx.doi.org/10.1093/actrade/9780198745631.003.0004.
Повний текст джерелаТези доповідей конференцій з теми "Component lifing"
Parthasarathy, Girija, and Satyavaraprasad Allumallu. "Reduced Models for Rotating Component Lifing." In ASME Turbo Expo 2004: Power for Land, Sea, and Air. ASMEDC, 2004. http://dx.doi.org/10.1115/gt2004-53993.
Повний текст джерелаCathcart, Henry, Christopher Meyer, Mark Joyce, and Richard Green. "Probabilistic Lifing Methods for Digital Assets." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-16187.
Повний текст джерелаThomsen, Benjamin, Michael Kokkolaras, Tomas Månsson, and Ola Isaksson. "Component Lifing Decisions and Maintenance Strategies in the Context of Aeroengine Product-Service Systems Design." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-46967.
Повний текст джерелаTinga, Tiedo, Wilfried P. J. Visser, Wim B. de Wolf, and Michael J. Broomhead. "Integrated Lifing Analysis Tool for Gas Turbine Components." In ASME Turbo Expo 2000: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/2000-gt-0646.
Повний текст джерелаBrooks, J. W., H. C. Basoalto, R. Sahota, and P. Tranter. "Probabilistic Property Prediction of Aero-Engine Components for Fatigue." In ASME Turbo Expo 2010: Power for Land, Sea, and Air. ASMEDC, 2010. http://dx.doi.org/10.1115/gt2010-22708.
Повний текст джерелаPeng, Caetano. "Non-Linear Aeromechanical Behaviour of Axial Core Compressor Stator Vanes." In ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-27580.
Повний текст джерелаGorelik, Michael, Waled T. Hassan, and Harry Kington. "Role of Quantitative NDE Techniques in Life Management of Gas Turbine Components." In ASME Turbo Expo 2006: Power for Land, Sea, and Air. ASMEDC, 2006. http://dx.doi.org/10.1115/gt2006-91337.
Повний текст джерелаGopinathrao, N., C. Mabilat, S. Alizadeh, D. Jackson, and R. Clarkson. "Conjugate Heat Transfer Study of a Spin Pit Rig: Application to the Lifing of HP Turbine Disc Firtrees." In ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-51294.
Повний текст джерелаMabilat, C., S. Alizadeh, D. Jackson, and R. Clarson. "Conjugate Heat Transfer Study of a Biaxial Rig: Application to the Lifing of HP Turbine Disc Firtrees." In ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-51297.
Повний текст джерелаHasselqvist, Magnus. "TMF Crack Initiation Lifing of Austenitic Carbide Precipitating Alloys." In ASME Turbo Expo 2004: Power for Land, Sea, and Air. ASMEDC, 2004. http://dx.doi.org/10.1115/gt2004-54333.
Повний текст джерела