Дисертації з теми "Combined power plant"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Combined power plant".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Rosso, Stefano. "Power Plant Operation Optimization Economic dispatch of combined cycle power plants." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264350.
Повний текст джерелаNär elproduktionen från förnybara källor ökar krävs högre flexibilitet av fossil bränsleproduktion för att hantera fluktuationerna från sol- och vindkraft. Detta resulterar i kortare driftscykler och brantare ramper för turbinerna och mer osäkerhet för operatörerna. Detta avhandlingsarbete tillämpar matematisk optimering och statistisk inlärning för att förbättra det ekonomiska utnyttjandet av en kombicykel i ett kraftverk som består av två separata block med två gasturbiner och en ångturbin. Målet är att minimera bränsleförbrukningen hos gasturbinerna samtidigt som man tar hänsyn till en serie av villkor relaterade till efterfrågan som anläggningen står inför, kraftproduktionsbegränsningar etc. Detta uppnås genom skapandet av en matematisk modell för anläggningen som reglerar hur anläggningen kan fungera. Modellen är sedan optimerad för minsta möjliga bränsleförbrukning. Maskinteknik har använts på sensor data från själva anläggningen för att realistiskt simulera turbinernas beteende. In och utdata kurvor har erhållits för kraftproduktion och avgasvärmeproduktion med hjälp av ordinary least squares (OLS) med månads data och med en tio minuters samplingshastighet. Modellen är korsvaliderad och bevisad statistiskt giltig. Optimeringsproblemet formuleras genom en generaliserad disjunktiv programmering i form av ett mixed-integer linear problem (MILP) och löses med hjälp av en Branch-and-Bound algoritm. Resultatet från modellen är en veckas värden, med femton minuters intervall, totalt i två månader. Lägre bränsleförbrukning uppnås med hjälp av optimeringsmodellen, med en vecka minskad bränsleförbrukning i intervallet 2-4%. En känslighetsanalys och en korrelationsmatris används för att visa efterfrågan och den maximala tillgängliga kapaciteten som kritiska parametrar. Resultaten visar att de mest effektiva maskinerna (alternativt de med högsta tillgängliga kapacitet) bör drivas med maximal belastning medan de fortfarande strävar efter ett effektivt utnyttjande av avgaserna.
Bengtsson, Sara. "Modelling of a Power System in a Combined Cycle Power Plant." Thesis, Uppsala universitet, Elektricitetslära, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-149318.
Повний текст джерелаHassan, Mohamed Elhafiz. "Power Plant Operation Optimization : Unit Commitment of Combined Cycle Power Plants Using Machine Learning and MILP." Thesis, mohamed-ahmed@siemens.com, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-395304.
Повний текст джерелаZheng, J. "Combined pinch and exergy analysis for commercial power plant design." Thesis, University of Manchester, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532908.
Повний текст джерелаQur'an, Omar Ali Sammour. "Design criteria and performance of steam turbines in a CPP plant for electrical power generation." Thesis, University of Hertfordshire, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.247306.
Повний текст джерелаBergström, Jarl, and Conny Franzon. "Thermo-economic optimization of a combined heat and power plant in Sweden : A case study at Lidköping power plant." Thesis, Blekinge Tekniska Högskola, Institutionen för industriell ekonomi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-20766.
Повний текст джерелаAl-Hamdan, Qusai Zuhair Mohammed. "Design criteria and performance of gas turbines in a combined power and power (CPP) plant for electrical power generation." Thesis, University of Hertfordshire, 2002. http://hdl.handle.net/2299/14041.
Повний текст джерелаBhatt, Dhruv. "Economic Dispatch of the Combined Cycle Power Plant Using Machine Learning." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-266110.
Повний текст джерелаKombicykelkraftverk spelar en nyckelroll i det moderna elsystemet pågrund av den låga investeringskostnaden, den korta tiden för att byggaett nytta kraftverk och hög flexibilitet jämfört med andra kraftverk.Elproduktionssystemen förändras i takt med en allt större andel förnybarelproduktion. Det som en gång var ett tydligt definierat flödefrån produktion via transmission till distribution ändrar nu karaktärtill fluktuerande, distribuerad generering. På grund av variationernai elproduktion från förnybara energikällor finns ett ökat behov avatt kombicykelkraftverk varierar sin elproduktion för att upprätthållabalansen mellan produktion och konsumtion i systemet. Kombicykelkraftverkbehöver startas och stoppas oftare. Detta medför mer stresspå gasturbinen och som ett resultat påverkas underhållsintervallerna.Syftet med detta examensarbete är att utveckla en algoritm för korttidsplaneringav ett kombicykelkraftverk där även driften på lång siktbeaktas. Begränsningarna på lång sikt utgår från underhållsintervallenför gasturbinerna. Dessa långsiktiga begränsningar definieras som antaletekvivalenta drifttimmar och ekvivalenta driftcykler för det aktuellakraftverket. Kombikraftverket drivs på den öppna elmarknaden.Det består av två SGT-800 GT och en SST-600 ångturbin. Det främstamålet med examensarbetet är att maximera den totala vinsten förkraftverket. Ett sekundärt mål är att utveckla metamodeller för attskatta använda ekvivalenta drifttimmar och ekvivalenta driftcyklerunder planeringsperioden.Siemens Industrial Turbo-machinery AB (SIT AB) har installeratsensorer som samlar in data från gasturbinerna. Maskininlärningsteknikerhar tillämpats på sensordata för att konstruera kurvor för attuppskatta värmetillförseln och avgasvärme. Resultaten visar en potentiellbesparing i bränsleförbrukningen om de sammanlagda ekvivalentadrifttimmarna och de sammanlagda ekvivalenta driftcyklernabegränsas under planeringsperioden. Det framhålls dock också att detfinns viktiga förbättringar som behövs innan korttidsplaneringsalgoritmenkan kommersialiseras.
Yevalkar, Amol. "Integrated Combined Heat and Power Plant with Borehole Thermal Energy Storage." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-266787.
Повний текст джерелаLänder som Sverige, som upplever temperaturer under 0 𝑜C, har ett högt värmebehov under vintrarna. Värmebehovet i Sverige tillgodoses genom fjärrvärme, elvärme, värmepumpar och pannor eldade med biobränsle. Fossila bränslen står för cirka 5 % av värmemarknaden. Sverige letar för närvarande efter alternativa lösningar för att ersätta de fossila bränslena. En av lösningarna som studeras är att ha värmelagring i borrhål (Borehole Thermal Energy Storage, BTES) som kan lagra överskottsvärmen som produceras från en kraftvärmeanläggning under sommaren. I tidigare studier utvecklades en dynamisk modell av ett BTES-system som var begränsat till ett specifikt fall. För att utforma BTES-system även för andra fall, utvecklades en generisk modell. Denna generiska dimensioneringsmodell för stabiliseringsstatus är flexibel och kan användas för att bestämma storleken på BTES när det gäller antalet borrhål, borrhålsdjup etc. enligt användarens krav. Några nyckelresultat för olika ingångsparametrar från den nyutvecklade statiska dimensioneringsmodellen och den befintliga dynamiska modellen jämfördes för flera simuleringar för att validera den nya statiska modellen. Resultaten för ett referensfall på 240 m borrhålsdjup och 0,8 kg/s massflödeshastighet i borrhålslingan presenterades. Dessutom utfördes en känslighetsanalys genom att variera borrhålens djup och massflödeshastigheten i borrhålslingan. Det visade sig att både nettonuvärdet (net present value, NPV) för hela systemet efter 20 år och BTES-effektiviteten var högre för lägre borrhåldjup och högre massflödeshastighet i borrhålsslingan.
Bouzguenda, Mounir. "Study of the combined cycle power plant as a generation expansion alternative." Thesis, Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/101165.
Повний текст джерелаM.S.
Horkeby, Kristofer. "Simulation of Heat Recovery Steam Generator in a Combined Cycle Power Plant." Thesis, Linköpings universitet, Institutionen för systemteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-75836.
Повний текст джерелаSmith, P. J. "Predicting hot corrosion rates under coal fired combined cycle power plant conditions." Thesis, Cranfield University, 1994. http://dspace.lib.cranfield.ac.uk/handle/1826/10512.
Повний текст джерелаYilmaz, Oguz. "Participation Of Combined Cycle Power Plants To Power System Frequency Control: Modeling And Application." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12607228/index.pdf.
Повний текст джерелаs grid and studies related to its improvement had been a great concern, so is the reason that main subject of my thesis became as &ldquo
Power System Frequency Control&rdquo
. Apart from system-wide global control action (secondary control)
load control loops at power plants, reserve power and its provision even at the minimum capacity generation stage, (primary control) are the fundamental concerns of this subject. The adjustment of proper amount of reserve at the power plants, and correct system response to any kind of disturbance, in the overall, are measured by the quality of the frequency behaviour of the system. A simulator that will simulate a dynamic gas turbine and its control system model, together with a combined cycle power plant load controller is the outcome of this thesis.
Safyel, Zerrin. "Enhancement Of The Bottoming Cycle In A Gas/steam Combined Cycle Power Plant." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/2/12605896/index.pdf.
Повний текст джерелаfor a single steam power cycle, effect of main cycle parameters on cycle performance are analyzed based on first law of thermodynamics. Also, case of existence of a reheater section in a steam cycle is evaluated. For a given gas turbine cycle, three different bottoming cycle configurations are chosen and parametric analysis are carried out based on energy analysis to see the effects of main cycle parameters on cycle performance. These are single pressure cycle, single pressure cycle with supplementary firing and dual pressure cycle. Also, effect of adding a single reheat to single pressure HRSG is evaluated. In single pressure cycle, HRSG generates steam at one pressure level. In dual pressure cycle, HRSG generates steam at two different pressure levels. i.e. high pressure and low pressure. In single pressure cycle with supplementary firing excess oxygen in exhaust gas is fired before entering HRSG by additional fuel input. So, temperature of exhaust gas entering the HRSG rises. Second law analysis is performed to able to see exergy distribution throughout the bottoming plant
furthermore second law efficiency values are obtained for single and dual pressure bottoming cycle configurations as well as basic steam power cycle with and without reheat. It is shown that maximum lost work due to irreversibility is in HRSG for a bottoming cycle in a single pressure gas / steam combined power plant and in boiler for a steam cycle alone. Comparing this with the single pressure cycle shows how the dual pressure cycle makes better use of the exhaust gas in the HRSG that dual pressure combined cycle has highest efficiency values and lost work due to irreversibility in -most significant component- HRSG can be lowered. And also it is shown that by extending the idea of reheat the moisture content is reduced and improvement in the performance is possible for high main steam pressures. Another observation is that supplementary firing increases the steam turbine output compared to the cycle without supplementary firing. The efficiency rises slightly for HP steam pressures higher than 14 MPa at HRSG exit, because the increased steam production also results in increased mass flows removing more energy from the exhaust gas.
Safyel, Zerrin Supervisor :. Yeşin Tülay. "Enhancement of the bottoming cycle in a gas/steam combined cycle power plant." Ankara : METU, 2005. http://etd.lib.metu.edu.tr/upload/2/12605896/index.pd.
Повний текст джерелаWiesner, Emma. "Optimization and energy efficiency measures in modified combined heat and power plant processes : A case study of changed processes in Mälarenergi power plant." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-324389.
Повний текст джерелаEU:s energieffektiviserings direktiv ställer hårda krav på företag i medlemsländerna att kartlägga och analysera energiförbrukning för att identifiera åtgärder för att öka effektivitet. Utöver detta så har Sverige ambitiösa mål om ökad energieffektivitet i samtliga sektorer. Att effektivisera energiproduktionsanläggningar för att hitta effektiviseringspotential är därför aktuellt för svenska energiproducenter. Mälarenergi är ett av de energiföretag som arbetar aktivt med att kartlägga och minska sin energiförbrukning. Studien har därför genomförts för att granska panna 5 i Västerås kraftvärmeverk, för att undersöka hur energieffektiviseringsåtgärder kan identifieras i kraftvärmeprocesser där driftförutsättningar och processer har förändrats. Panna 5 har flertalet gemensamma processer med en äldre panna i anläggningen, panna 4, vars drift har upphört och pannan ska läggas ner. Driftförhållandena i de tidigare gemensamma systemen för kondensat, matarvatten, kylning och olja har därför förändrats och massflöden i systemen minskat kraftigt. De förändrade förhållandena och massflödena påverkar kapacitetsbehovet i systemen, effektiviteten i flertalet komponenter samt de tekniska kraven som ställs på panna 5. Den största förändringen i systemet är de minskade massflödena. Flödet i kondensatsystemet har minskat från ca 100 kg/s till 45 kg/s. Samma förändring i matarvattensystemet då panna 4 kopplas bort, är från 160 kg/s till 50 kg/s. Studien visar att det finns energieffektiviseringspotential i att byta ut pumpar vars pumpdrift har påverkats kraftigt, upphöra med drift av pumpar utan frekvensstyrning, installera frekvensstyrning på pumpar där flöden varierar samt förenkla och ta bort överflödiga processer som inte nyttjas vid de nya förhållandena. Processerna kan också optimeras genom att investera i en ny direktvärmare bättre lämpad för panna 5, dock är lönsamhetskalkylen för denna svag och ytterligare bedömning krävs. Resultatet visar även att då turbinen till panna 5 är uttjänt och nedmonteras så kan processerna kring panna 5 förenklas ytterligare och optimeras så pass att 745 MWh el för drift av pannan kan sparas varje år. Generellt kan det konstaterats att även förvärmare, matarvattentank och värmeväxlare är överdimensionerade när flödet i systemet minskar, kostnads-och energibesparingen för att byta ut dessa komponenter är dock negativa, eftersom komponenterna själva inte förbrukar någon energi. Att ha för stora kapaciteter i värmeväxlare bör snarare ses som en möjlighet, att kartlägga kapacitetsbehovet underlättar dock underhållsplanering i systemet. Den generella metoden som användes i studien bygger på modellen att först kartlägga de genomförda förändringarna i systemen, fastställa funktionskraven i det nya systemet och därefter analyserna skillnaderna mellan de fastställda funktionskraven och den befintliga tekniken. Optimeringspotential kan därefter identifieras där dessa två skiljer sig till stor del. Därefter utvärderas optimeringsåtgärden genom kvantitativ analys och investeringskalkylering.
Carls, Fredrik. "Evaluation of machine learning methods for anomaly detection in combined heat and power plant." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-255006.
Повний текст джерелаI hopp om att öka identifieringsgraden av störningar i kraftvärmepannor och därigenom minska oplanerat underhåll konstrueras och evalueras tre maskininlärningsmodeller.Algoritmerna; k-Nearest Neighbor, One-Class Support Vector Machine, och Autoencoder har bevisad framgång inom forskning av anomalidetektion, men är relativt outforskade för industriella applikationer som denna på grund av svårigheten att samla in icke-artificiell uppmärkt data inom området.Grundversionerna av k-Nearest Neighbor och Auto-encoder presterade nästan likvärdigt. Dock var Auto-encoder-modellen lite bättre och nådde ett AUPRC-värde av 0.966 respektive 0.615 på träningsoch testperioden. Inget tillräckligt bra resultat nåddes med One-Class Support Vector Machine. Auto-encoder-modellen gjordes mer sofistikerad för att se hur mycket prestandan kunde ökas. Det visade sig att AUPRC-värdet kunde ökas till 0.987 respektive 0.801 under träningsoch testperioden. Dessutom lyckades modellen identifiera och generera ett larm vardera för alla incidenter under testperioden. Slutsatsen är att ML framgångsrikt kan användas för att identifiera störningar iett tidigare skede och därigenom potentiellt kringgå i annat fall dyra oplanerade underhåll. Emellertid finns det fortfarande mycket utrymme för förbättringar av modellen samt inom insamlingen av data.
Wasantakorn, Aran. "Efficient power generation by integrating a MSW incinerator with a combined cycle gas turbine plant." Thesis, University of Sheffield, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.369938.
Повний текст джерелаGarcía, José Angel. "Development and validation of a combined heat and power plant model for integration in DYESOPT." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264265.
Повний текст джерелаBiliyok, Chechet. "Study of power plant with carbon dioxide capture ability through modelling and simulation." Thesis, Cranfield University, 2013. http://dspace.lib.cranfield.ac.uk/handle/1826/12111.
Повний текст джерелаMantilla, Gutierrez Weimar. "Towards Flexible Power Generation Short-term Optimization of a Combined Cycle Power Plant Integrated with an Inlet Air Conditioning Unit." Thesis, KTH, Energiteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-263904.
Повний текст джерелаElproducerande kombikraftverk (CCGT) förväntas förbättra sin flexibilitet för att kunna bidra till stabilisering av elnätet i framtida scenarier med ökande andel variabla, förnybara energikällor. Av de diverse metoder som finns att tillgå för att förbättra ett kraftverks prestanda, erbjuder en inluftsbehandlingsenhet både fördelar med kraftförbättring samt minskning av “minimun environmental load”; genom att med hjälp av kall termisk energilagring och en värmepump kontrollera gasens inluftstemperatur till gasturbinen. I den här uppsatsen undersöks hur en sådan inluftsbehandlingsenhet påverkar prestandan hos en kraftproduktionsfokuserad CCGT när en optimerad driftsstrategi introduceras. För att bestämma kraftverkets elproduktion vid varje timme och det korrekta driftläget för luftbehandlingsenheten (för att uppnå tidigare nämnda eftersökta fördelar) formulerades ett linjärt optimeringsproblem med syfte att maximera kraftverkets driftsförtjänst under ett 24-timmars tidsspann. För att bedöma den föreslagna inluftsbehandlingsenhetens inverkan under den optimerade driftsstrategin genomfördes simuleringar av ett referenskraftverk med och utan nämnda enhet, varpå en jämförelse med avseende på teknisk prestanda och ekonomi genomfördes. Vidare genomfördes en fallstudie där storlek på diverse utrustning varierades för att kunna identifiera trender i kraftverksprestanda baserat på dessa parametrar; slutligen genomfördes en känslighetsanalys rörande hur luftbehandlingsenheten och kontrollstrategin reagerar vid olika marknader.. Resultaten indikerar att en inluftsbehandlingsenhet tillsammans med en optimerad driftsstrategi ökar kraftverkets driftsvinning genom en ökad variation i kraftuttag över peak och off-peak timmar. För fallstudien i norra Italien fanns att ett kraftverk med integrerad luftbehandlingsenhet är mer lönsamt sett till nuvärdesanalys. Gällande teknisk prestanda visade resultaten att enheten minskar den minsta miljöbelastningen med 1,34 % när delbelastningsdrift fordras, och att det kan öka nettokraftuttag med 0,17% årligen. Sammanfattningsvis presenterar denna studie fördelarna med ett driftsoptimerat kraftverk kopplat till en ny lösning för att öka flexibilitet hos CCGT:er.
Gonzalez, Diaz Abigail. "Sequential supplementary firing in natural gas combined cycle plants with carbon capture for enhanced oil recovery." Thesis, University of Edinburgh, 2016. http://hdl.handle.net/1842/20483.
Повний текст джерелаJayasinghe, Prabodha. "Development of a tool for simulating performance of sub systems of a combined cycle power plant." Thesis, KTH, Energiteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-99164.
Повний текст джерелаBellingham, Christopher Grant. "The clean development mechanism potential of a combined heat and power plant in Stellenbosch, South Africa." Master's thesis, University of Cape Town, 2007. http://hdl.handle.net/11427/5556.
Повний текст джерелаLin, TsungPo. "An adaptive modeling and simulation environment for combined-cycle data reconciliation and degradation estimation." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24819.
Повний текст джерелаCommittee Chair: Dimitri Mavris; Committee Member: Erwing Calleros; Committee Member: Hongmei Chen; Committee Member: Mark Waters; Committee Member: Vitali Volovoi.
Agha, Mujtaba Hassan. "Integrated management of energy and production : scheduling of batch process and Combined Heat & Power (CHP) plant." Thesis, Toulouse, INPT, 2009. http://www.theses.fr/2009INPT050G/document.
Повний текст джерелаThe issue of energy has emerged as one of the greatest challenges facing the mankind. The search is on for finding alternative sources of energy that will replace fossil fuels as the primary source of energy. However, for the foreseeable future, fossil fuels will remain the main source of energy. Therefore, it is of paramount importance to devise methodologies for more rational use of energy in all walks of human life. In the industrial perspective, the deployment of site utility system (generally CHP plants) provides a great potential source for energy savings. However, the management of such type of industrial units is traditionally carried out using sequential three step approach: scheduling of the production plant, estimation of the utility needs of production plant and finally scheduling of the site utility system. In this kind of approach, all the focus is placed on the production plant and the utility system is treated as its subsidiary. To improve the decision-making process, this thesis proposes an integrated approach which addresses this imbalance by carrying out simultaneous and coherent scheduling of batch production plant and site utility system. The proposed methodology relies on discrete time modeling and uses Mixed Integer Linear Programming (MILP). Moreover, to permit an efficient and generic formulation of various kinds of industrial problems, a new scheduling framework called Extended Resource Task Network (ERTN) has been developed. The ERTN framework (an extension of existing RTN framework) allows for accurate representation and scheduling of any type of production plant and any type of site utility system. The results show that the integrated approach leads to better synchronization between production plant and site utility system. Thereby, the integrated approach leads to significant reduction in energy costs and decrease in harmful gas emissions
Nuutinen, Antti, and Giovanni Graziano. "Towards Flexible Cogeneration: Techno-economic Optimization of Advanced Combined Cycle Combined Heat and Power Plants integrated with Heat Pumps and Thermal Energy Storage." Thesis, KTH, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-235820.
Повний текст джерелаBydén, William, and David Fridlund. "Carbon Negative Heat and Power with Biochar Production : An Economic Analysis of a Combined Pyrolysis and CHP plant." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-279608.
Повний текст джерелаDen fjärde november 2016 trädde Parisavtalet i kraft vilket uppgav att länder över hela världen ska sträva efter att begränsa den globala temperaturökningen till 1,5 grader Celsius. I enlighet med detta mål har FN:s mellanstatliga klimatpanel, IPCC, specificerat att koldioxidavlägsnande åtgärder, såsom kolinlagring genom produktion av biokol, är nödvändigt. Biokol är ett fast och poröst material, rikt på kol, som produceras när biomassa genomgår en process som kallas pyrolys. Om biokol blandas ner i jord kan det binda kol i hundratals eller tusentals år samtidigt som det fungerar som jordförbättrare. När biomassa pyrolyseras produceras också en pyrolysgas som kan användas för att generera värme och elektricitet. Det här examensarbetet undersöker om det kan vara ekonomiskt genomförbart att bygga och driva en anläggning, benämnd en kombinerad pyrolys- och kraftvärmeanläggning, som kombinerar biokolsproduktion med värme- och elproduktion för att avlägsna koldioxid från atmosfären. Resultaten från arbetet visar att det kan vara ekonomiskt genomförbart att bygga och driva en kombinerad pyrolys- och kraftvärmeanläggning. Den ekonomiska genomförbarheten påverkas dock i hög grad av priset på biokol som jordförbättringsprodukt. Marknaden för biokol är dessutom outvecklad vilket gör att priset för biokol osäkert. En annan faktor som i hög grad skulle kunna påverka den ekonomiska genomförbarheten för anläggningen är andelen kol i biokol som kan anses vara lagrad. En högre andel innebär att betydligt mer statligt stöd kan ges för att finansiera anläggningen samt att potentiella intäkter från kolkrediter kan öka. Kapitalkostnaderna för att bygga anläggningen är också en faktor med hög osäkerhet som har stor effekt på den ekonomiska genomförbarheten. Från detta examensarbete dras slutsatsen att mer forskning kring biokolsmarknaden samt kring kapitalkostnaderna för att bygga anläggningen behövs. Detta behövs för att ytterligare fastställa den ekonomiska genomförbarheten hos en sådan anläggning för att avlägsna koldioxid från atmosfären.
Malmberg, Malin. "Transient modeling of a high temperature borehole thermal energy storage coupled with a combined heat and power plant." Thesis, KTH, Tillämpad termodynamik och kylteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-226160.
Повний текст джерелаKoppling av högtemperatur-borrhålslager (HT-BTES) med befintliga kraftvärmeverk (CHP) är ett lovande tillvägagångssätt för att öka energieffektiviteten i fjärrvärmesystem genom återvinning spillvärme. Denna lösning diskuteras för närvarande i Sverige av Tekniska Verken i Linköping AB, för att lagra spillvärme från kraftvärmeproduktion sommartid i en HT-BTES och utnyttja denna under effekttoppar på vintern. Detta skulle öka flexibiliteten mellan energiförsörjning och efterfrågan i en av deras anläggningar, Gärstadverket. Den tillgängliga framledningstemperaturen under laddning av borrhålslagret är ca 95 ℃. Det finns dock fortfarande begränsad erfarenhet av HT-BTES med bara några få installationer i drift över hela världen. Syftet med detta masterexamensarbete har varit att utvärdera en potentiell systemkonfigurationskonfiguration för effektiv utvinning och lagring av spillvärme från Gärstadverkets kraftvärmeverk kopplat till ett HT-BTES. Data från tidigare drift av kraftvärmeverket och en befintlig TRNSYS-modell, utvecklad hos KTH och Bengt Dahlgren AB baserat på den välkända DST-metoden (Duct Ground Heat Storage Model), användes som utgångspunkt för utvecklingen av en ny, mer komplett modell som inkluderar en värmepumpsmodell. Värmepumpsmodellen utvecklades utifrån data från en värmepumpstillverkare för ett icke-standardiserat 50 MW värmepumpsystem, med R717 som kylmedium. Som ett ytterligare mål har designparametrar och erfarenheter från drift av redan befintliga HT-BTES installationer sammanställts och analyserats. BTES-designen varierades genom simuleringar med olika antal borrhål och borrhålsdjup. Systemet simulerades fortsatt med två olika borrhålsvärmeväxlare (BHE): dubbla U-rör och koaxiala BHE. Baserat på resultaten hittades tre optimerade BTES-geometrier: 1 400 borrhål med dubbla U-rörs BHE och 300 m borrhålsdjup, 1 300 borrhål med koaxiala BHE och 300 m borrhålsdjup samt en design med 1 500 borrhål med dubbla U-rör och ett borrhålsdjup på 275 m – alla tre konfigurationer med ett borrhålsavstånd på 5 m och borrhålsloopar med tre borrhål kopplade i serie. De tre BTES-geometrierna visade liknande resultat med potential att lagra cirka 107 GWh / år och att extrahera runt 93 GWh / år med användning av en värmepump. Den resulterande urladdningstemperaturen från borrhålslagret varierar mellan 40-60 °C och upp till 70 °C i början av urladdningsperioden under det tionde simuleringsåret. Vidare studie krävs dock för att undersöka tillgängligheten av koaxiala BHE på marknaden som kan fungera med de höga temperaturerna i borrhålslagret.
Luo, Xiaobo. "Process modelling, simulation and optimisation of natural gas combined cycle power plant integrated with carbon capture, compression and transport." Thesis, University of Hull, 2016. http://hydra.hull.ac.uk/resources/hull:14005.
Повний текст джерелаHan, Song. "Retrofitting CHP Plant and Optimization of Regional Energy System." Licentiate thesis, Mälardalens högskola, Akademin för hållbar samhälls- och teknikutveckling, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-13185.
Повний текст джерелаREMOWE, CSC
Bughazem, Mohamed. "Performance enhancement of the single shaft combined cycle gas turbine power plant by intake air cooling using an absorption chiller." Thesis, University of Newcastle Upon Tyne, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.613447.
Повний текст джерелаKarkulahti, Linnéa, and Monika Mizgalewicz. "Optimization of a Combined Heat and Power Plant for the Future Electricity Market : A case study conducted at Söderenergi AB." Thesis, KTH, Energiteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-271708.
Повний текст джерелаSveriges energisystem är i förändring där avvecklingen av kärnkraft och ökad implementering av vindkraft är i fokus. Konsekvenserna av dessa förändringar kommer påverka elmarknaden och därmed elproducenterna, bland dem kraftvärmeverk. Detta examensarbete utvärderar energisystemet i Sverige 2025 med fokus på elmarknaden. Arbetet undersöker också hur ett kraftvärmeverk kan prestera i framtiden baserat på förändringar i elpriset. Sex olika scenarios har utvecklats där elpriset har modifierats baserat på analysen av vind- och kärnkraftsutvecklingen i Sverige och dess påverkan på elpriset. Ytterligare skapas en modell av ett kraftvärmeverk och ett fjärrvärmenät i BoFiT. Scenarierna implementeras i modellen och resultat extraheras och analyseras baserat på värmeproduktion, val av driftläge, körordning i systemet samt ekonomisk prestanda. Resultaten visar främst att volatiliteten i elpriset ökar till 2025. Låga elpristimmar (<100SEK/MWh) visar sig inträffa under hela året medan höga elpristimmar(>640 SEK/MWh) dominerar under vintern - säsongen där efterfrågan på värme är som högst. Resultaten visar att det förväntade elpriset kräver högre reglering av det modellerade kraftvärmeverket och att anläggningen idag är anpassad för att hantera framförallt höga elpriser men inte låga elpriser. Även fjärrvärmenätet i sig påverkas av volatilitet i elpriserna och mer frekventa och större variationer observeras i körordningen. Detta antyder att elpriserna i framtiden måste följas mer aktivt och att en strategi, som möjliggör snabb reglering för anpassning av elpriserna, måste utvecklas. Kommunikation och samarbete mellan parterna i fjärrvärmesystemet kommer därmed vara av hög betydelse.
Krüger, Jan. "Models for the location decision for a combined cycle power plant : basic principles for solving the decision problem of the choice of location for a feasibility study of gas-fired power plants." Doctoral thesis, Universitat Politècnica de Catalunya, 2015. http://hdl.handle.net/10803/326467.
Повний текст джерелаLa presente tesis trata sobre las bases para la solución del problema de decisión de la selección del emplazamiento para un estudio de viabilidad de las plantas eléctricas de gas, basado en declaraciones realistas y prácticas, bajo un enfoque de negocio. El análisis de las diferentes teorías y la investigación de criterios de decisión relevantes ha ilustrado la amplia gama de factores específicos del lugar y los criterios que han de ser tenidos en cuenta. Sobre la base de los proyectos existentes, en los que se analizaron las teorías de selección de sitio para diversas industrias, el presente proyecto de investigación establece una nueva base para un enfoque específico en el área de generación de electricidad en centrales eléctricas de gas. Para las plantas eléctricas a gas, la AIE prevé un aumento importante de capacidades, y señala que las energías renovables y la energía nuclear cuenta con más de la mitad de toda la nueva capacidad añadida en todo el mundo hasta el año 2040. Debido a los bajos costos de inversión por kW de potencia instalada, el alto factor de eficiencia, las bajas emisiones de CO2 y los tiempos de construcción relativamente cortos, un gran número de plantas usando gas ya están en construcción en Europa. Una gran cantidad de países se han centrando en la licuefacción del gas natural (GNL) desde hace varios años. Las propiedades físicas de GNL facilitar su transporte en barcos a los puertos de destino, donde el gas natural se evapora a su estado gaseoso. El GNL ofrece una alternativa práctica para el transporte de gas a través de gasoductos y una posibilidad de poner la estructura de adquisición sobre una base más amplia. Esto, a su vez, dará lugar a nuevas alternativas para la elección de los sitios. Proyectos como el oleoducto del Báltico o el proyecto Nabuko ofrecen la perspectiva de una mayor seguridad del suministro. El estudio considera el impacto de las medidas para garantizar el suministro como la generación descentralizada y el uso de energías renovables para la generación de energía. Las metas de expansión de la UE de 15 países de 2004 y los valores de cada país miembro de la UE dio lugar a un valor objetivo indicativo de alrededor del 20% de la cuota de las energías renovables en el consumo bruto de electricidad de la UE-25 en 2010. La puesta en práctica política individuales en cada uno de 25 países de la UE, es uno de los criterios para la selección de sitios para proyectos de plantas de energía en Europa. La importancia del comercio internacional de electricidad para el mercado eléctrico liberalizado en Europa se destaca en el trabajo, además de la promoción de la competencia a escala europea en la generación de electricidad, el aumento de la utilización eficiente de las capacidades existentes en la flota de la planta de energía, y la expansión de las capacidades de transferencia de energía transfronterizos entre los estados europeos. Una buena cooperación de todos los participantes es esencial en el mercado de la energía, para el desarrollo de una flota de plantas de energía eficiente en Europa y, por último, para el éxito de cada empresa en particular. El método de encuesta utilizada, de diseño propio ha demostrado su eficacia en el presente estudio. La extensión del cálculo de la inversión cuantitativa por un proceso de evaluación y decisión cualitativa refinada y la introducción de un análisis de la utilidad modificado con razón tiene su lugar en este paradigma. Sobre la base del material empírico, se realizó una caracterización detallada de la ponderación de los criterios del sitio. Como resultado de esto se encontró que la decisión del sitio es un proceso multipersonal, en el que el comportamiento de la racionalidad subjetiva o restringida de los jugadores implicados no permite una conclusión definitiva, pero sólo proporciona una conclusión de tendencias, planteando la solución como juicios colectivos en lugar de individuales. Cambios futuros, pueden obligar a optimizar el trabajo.
ÖHMAN, AXEL. "Green hydrogen production at Igelsta CHP plant : A techno-economic assessment conducted at Söderenergi AB." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299434.
Повний текст джерелаEnergiomställningen som äger rum i olika delar av världen kommer att ha många effekter på de nuvarande energisystemen eftersom en ökande mängd väderberoende kraftproduktion installeras varje år. I Sverige, precis som många andra länder, kommer detta att medföra både utmaningar och möjligheter för dagens energiproducenter. Utmaningar som kan uppstå tillsammans med en alltmer fluktuerande elproduktion inkluderar både kraftunderskott vid vissa tider och regioner men också timmar av överproduktion som kan få elpriserna att sjunka avsevärt. Sådana utmaningar måste mötas av både planerbar kraftproduktion och dynamisk konsumtion. Omvänt kan aktörer som är beredda att anpassa sig till det nya klimatet genom att implementera ny teknik eller innovativa affärsmodeller dra nytta av övergången till ett helt förnybart energisystem. Denna rapport utvärderar den tekno-ekonomiska potentialen för produktion av grön vätgas vid ett kraftvärmeverk med målet att ge beslutsstöd till en fjärrvärme- och elproducent i Sverige. Det var i företagets intresse att undersöka hur vätgasproduktion kan bidra till att sänka produktionskostnaden för fjärrvärme samt bidra till att minska växthusgaser. I projektet utvärderades två separata affärsmodeller: Power-to-gas och Power-to-power baserat på teknisk och ekonomisk prestanda samt miljöpåverkan. För att kunna göra detta utvecklades en matematisk modell i Python av kraftvärmeverket och vätgassystemen som optimerar driften baserat på kostnader. Affärsmodellerna simulerades sedan för två olika års elpriser för att undersöka modellens prestanda i olika typer av elmarknader. De viktigaste slutsatserna i studien visar att Power-to-gas redan kan vara lönsamt till ett vätgaspris på 40 SEK per kg, vilket är det förväntade marknadspriset på grön vätgas for transportsektorn. Efterfrågan är idag begränsad men förväntas växa snabbt inom en snar framtid, särskilt inom tung transport. En annan begränsande faktor för vätgasproduktion visade sig vara tillgången på lagringsutrymme, eftersom vätgas även vid tryck upp till 200 bar kräver stora volymer. Power-to-power för frekvensreglering visade sig inte vara ekonomiskt försvarbart, eftersom intäkterna för att tillhandahålla nättjänster inte kunde uppväga de höga investeringskostnaderna under några av de simulerade åren. Detta resulterade i en hög LCOE på över 3000 SEK per MWh, vilket främst berodde på Power-to-power-systemets låga utnyttjandegrad. Slutligen kan det sägas att grön vätgas har stor potential att ersätta fossila bränslen i sektorer som är svåra att elektrifiera, exempelvis tunga vägtransporter eller sjöfart. Därför kan storskalig grön vätgasproduktion hjälpa till att dekarbonisera många av samhällets fossiltunga segment. Genom att dessutom fungera som balansering har väteproduktion i en Power-to-gas-process potential att bli en viktig del av ett system med stor andel förnybar energi.
Errey, Olivia Claire. "Variable capture levels of carbon dioxide from natural gas combined cycle power plant with integrated post-combustion capture in low carbon electricity markets." Thesis, University of Edinburgh, 2018. http://hdl.handle.net/1842/33240.
Повний текст джерелаvon, Hepperger Florian. "Implementation of water electrolysis in Växjö´s combined heat and power plant and the use of excess heat : A techno-economic analysis." Thesis, Linnéuniversitetet, Institutionen för byggd miljö och energiteknik (BET), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-105276.
Повний текст джерелаLindström, Viktor. "Undersökning och riskbedömning av lågtemperaturkorrosion i ett kraftvärmeverk : Investigation and risk assessment of low temperature corrosion in a combined heat and power plant." Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-121629.
Повний текст джерелаJanošťák, František. "Modely toků v síti pro odpadové hospodářství." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254439.
Повний текст джерелаFogdal, Hanna, and Adrian Baars. "Utilization of Forest Residue through Combined Heat and Power or Biorefinery for Applications in the Swedish Transportation Sector : a comparison in efficiency, emissions, economics and end usage." Thesis, KTH, Kraft- och värmeteknologi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-215767.
Повний текст джерелаSverige har som mål att skapa en fossiloberoende fordonsflotta till år 2030. Två vägar som pekats ut för att nå målet är att öka användningen av eldrivna fordon eller att producera mer biobränsle. Båda alternativen kan drivas av skogsavfall, en råvara som det finns gott om i Sverige. Elektricitet kan produceras av skogsavfallet i ett kraftvärmeverk, och biobränsle i ett bioraffinaderi genom användning av förgasning och Fischer-Tropschmetoden. I Stockholms län skulle båda systemen dessutom kunna producera värme till Stockholms fjärrvärmesystem. Det är dock viktigt att använda skogsavfallet på ett resurseffektivt sätt. Därför undersöker detta arbete effektiviteten av de två olika systemen tillsammans med en analys av växthusgasutsläpp och ekonomiska förutsättningar. För att kunna utvärdera effektiviteten och klimatpåverkan av de två olika systemen utfördes en ”skog-till-hjul”-analys där produkten undersöktes från ursprunget, till drivandet av ett fordon. För att utföra studien definierades fyra funktionella enheter. De funktionella enheterna var: körsträcka med bil mätt i kilometer, kWh fjärrvärmeproduktion, CO2 ekvivalenter av växthusgasutsläpp och MWh skogsavfall. Studien visade att systemet där skogsavfallet används i ett kraftvärmeverk för att producera elektricitet och ladda elbilar hade bättre resultat i de två första funktionella enheterna. Systemet producerade nästan dubbelt så lång körsträcka och mer än dubbelt så mycket fjärrvärme som systemet där skogsavfallet används i ett bioraffinaderi och biobränslet används i dieselbilar. Studien visade även att båda system kan bidra till att sänka växthusgasutsläppen från transportsektorn. Lönsamheten att investera i ett kraftvärmeverk eller bioraffinaderi beräknades med nuvärdesmetoden. Studien visade att de förväntade framtida energipriserna är för låga för att investeringarna ska bli lönsamma. Kraftvärmeanläggningen hade ett nuvärde på -1.6 miljarder kronor, och bioraffinaderiet ett nuvärde på -4.6 miljarder kronor. Dessutom ansågs investeringen i ett bioraffinaderi vara en hög risk på grund av den höga investeringskostnaden och att tekniken idag inte är kommersialiserad. Det finns även en rad andra barriär för att genomföra de två olika systemen, dessa barriärer har studerats kvalitativt i arbetet.
Wellmann, Johannes [Verfasser], Frank [Akademischer Betreuer] Behrendt, Frank [Gutachter] Behrendt, and Christoph [Gutachter] Nytsch-Geusen. "Conceptual design of a concentrating solar power plant for a combined electricity and water supply of the city El Gouna / Johannes Wellmann ; Gutachter: Frank Behrendt, Christoph Nytsch-Geusen ; Betreuer: Frank Behrendt." Berlin : Technische Universität Berlin, 2015. http://d-nb.info/1156177367/34.
Повний текст джерелаDlouhá, Kristýna. "Návrh HRSG kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401508.
Повний текст джерелаDembinskas, Donatas. "Kogeneracinės jėgainės elektrotechninė dalis." Bachelor's thesis, Lithuanian Academic Libraries Network (LABT), 2011. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2011~D_20110804_093038-46733.
Повний текст джерелаCogeneration technologically advanced of heat and electricity production. It is particularly relevant for Lithuania, because there exists a strong need for heat production, the restructuring of heat and electricity networks, is changing its legal framework, the development of market relations. Undergraduate work is designed combined heat and power plant. Cogeneration plant will be used for alternative fuel: biogas which derived from the landfill. However, in order to improve the efficiency of cogeneration landfill gas is mixed with natural gas in certain proportion. Combined heat and power plant is designed according to the Republic of Lithuania laws and regulations. Heat comes from cogeneration emissions into the atmosphere in summer. It was found that in order to increase the heat recovery efficiency, not only in winter but in summer, for example to be equipped with heated vegetable production complexes.
Магєра, Арина Юріївна. "Система газоочищення енергетичного блоку Дарницької ТЕЦ-4 у м. Київ". Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/41710.
Повний текст джерелаGraduation project of first (Bachelor) level of higher education on the theme: «Gas-cleaning system of Darnytskd CHP-4 power units in the Kyiv»: explanatory note for 74 p., 11 figures, 13 tables, 16 bibliographic names; 2 add,; drawings – 4 arcs. f. A1. The purpose of the project is to reconstruct the CHP gas cleaning system with the replacement of existing wet ash traps with a Venturi pipe with high-efficiency electrostatic precipitators. The analysis of ecological indicators of operation of the object is carried out. Features of operation of the energy facility and positive characteristics after reconstruction are given. Methods for cleaning flue gases from sulfur are presented and described, and several options for cleaning flue gases from harmful components and especially from nitrogen oxides NOx are considered. Using regulatory materials, design documentation and passport data of the TP-15 power steam boiler, calculations of technological characteristics of the electrostatic precipitator for different types of coal burned in the boiler are given. According to the results of calculations, a comparison of the characteristics of flue gas cleaning with an electrostatic precipitator for different types of coal with design fuel was performed. The main measures and tools for organizational and technical support of labor protection have been developed. The drawings show sections of the gas cleaning unit (electrostatic precipitator) and the assembly and technological schemes of the boiler ash removal system.
Дипломный проект первого (бакалаврского) уровня высшего образования на тему: «Система газоочистки энергетического блоку Дарницкой ТЕЦ-4 в г. Киев»: пояснительная записка на 74 с., 11 рис., 13 табл., 16 библиографических наименований; 2 прилож.; чертежей – 4 л. ф. А1. Цель проекта – реконструкция системы газоочистки ТЕЦ с заменой существующих мокрых золоуловителей с трубой Вентури на высокоэффективные электрофильтры. Проведен анализ экологических показателей эксплуатации объекта. Приведенные особенности эксплуатации энергообъекта и положительные характеристики после реконструкции. Приведенные и описаны методы очистки дымовых газов от серы, и рассмотрены несколько вариантов очистки дымовых газов от вредных компонентов и особенно от оксидов азота NOx. Используя нормативные материалы, проектную документацию и паспортные данные энергетического парового котла ТП-15, приведены расчеты технологических характеристик электрофильтра для различных видов угля, сжигаемого в котле. По результатам расчетов выполнено сравнение характеристик очистки дымовых газов электрофильтром для различных видов угля с проектным топливом. Разработаны основные мероприятия и средства по организационно-техническому обеспечению охраны труда. На чертежах приведены газоочистительная установка (электрофильтр) и монтажно-технологическая схема системы золоудаления котла.
Öström, Daniel. "Styrning av värmepanna med PLC : Från relästyrning till digital styrning." Thesis, Mittuniversitetet, Avdelningen för elektronikkonstruktion, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-31091.
Повний текст джерелаAt the municipality-owned energy company Sala Heby Energi AB work is underway to convert the control of a heating-pan from relay control and analog monitoring to digital control with PLC. Within the framework of this degree project, three specific parts of this conversion are studied: a theoretical study aimed at mapping the pros and cons of the conversion, an examination of the possibility of improving individual control functions in conjunction with the conversion and the establishment of a schematic diagram or overview of the heat boiler that will serve as a basis for its implementation in the SCADA-system of the combined power and heating plant. An advantage of relay control is that it can be cost-effective to handle individual simple control tasks. However, overall and in particular for controlling major more complex processes the benefits of digital control is large. This in terms of cost-effectiveness for larger systems, possibilities for more efficient alarm management and the ability to log operational data. Two individual functions are studied: control of the heating pans damper in relation to the steam pressure and fuel management control. To adjust the height of the damper, two control options are compared using Simulink simulations. Conventional PID control is com-pared to a self-configured fuzzy controller. Much due to a poorly substantiated modelling of the process, the fuzzy regulator's possible benefits to the PID regulator can not be determined. Future studies of the fuzzy regulator could potentially change this circumstance. Furthermore, the control of functions for the fuel management are discussed, mainly authorship of drivers who will fill fuel to the fuel storage. In order for them to have access to the fuel management functions when the combined power and heating plant is unmanned, a key switch solution is proposed to activate the control functions. Finally, a new digital overview picture is produced for the system of the heating pan. This contains minor up-dates and adjustments compared to two overview images depicted on the old control cabinets.
Třináctý, Jiří. "Parní turbína pro fosilní elektrárnu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231811.
Повний текст джерелаDogan, Osman Tufan. "Performance Of Combined Cycle Power Plants With External Combustion." Thesis, METU, 2003. http://etd.lib.metu.edu.tr/upload/1223288/index.pdf.
Повний текст джерелаRajasekeran, Sangeetha. "Enabling Grid Integration of Combined Heat and Power Plants." Thesis, Virginia Tech, 2020. http://hdl.handle.net/10919/99730.
Повний текст джерелаMaster of Science
Combined Heat and Power is a generation technology which uses a single fuel source to produce two useful outputs - electric power and thermal energy - by capturing and reusing the exhaust steam by-product. These generating units have much higher efficiencies than conventional power plants, lower fuel emissions and have been a popular choice among several industries and commercial buildings with a need for uninterrupted heat and power. With increasing calls for climate action and large scale deployment of renewable based energy generation sources, there is a higher need for reliable base-line generation which can handle the fluctuations and uncertainty of such renewables. This need can be met by CHP units owing to their geographic distribution and their high operating duration. CHPs also provide a myriad of other benefits for the grid operators and environmental benefits, compared to the conventional generators. However, unfavorable and inconsistent regulatory procedures have discouraged these facility owners from actively engaging in providing grid services. Therefore, it is imperative to look into some of the existing policies and understand where the changes and incentives need to be made. In this work, we look into methods that can ease CHP integration from a technological and an economic point of view, with the aim of encouraging grid operators and CHP owners to be more active participants.
Kandamby, Naminda Harisinghe. "Mathematical modelling of gasifier fuelled gas turbine combustors." Thesis, Imperial College London, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267305.
Повний текст джерелаOlofsson, Emelie. "Lokal provtagning och analys på rökgaskondensat för driftövervakning av tungmetallrening med jonbytarmassor." Thesis, Uppsala universitet, Luft-, vatten- och landskapslära, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-414340.
Повний текст джерелаIn heating and combined heat and power plants, different types of fuels are burned to produce electricity and district heating. During the combustion flue gases containing pollutants, such as heavy metals, are formed from the flue. The plants have requirements for low emissions, both from the flue gases and the wastewater. The flue gases are purified by various techniques and a common technique is flue gas condensation. During the flue gas condensation, a liquid called flue gas condensate, is formed, which partly contains heavy metals from the flue. The flue gas condensate must be cleaned before it can leave the plant. A step in the purification of the flue gas condensate is usually heavy metal ion-exchanger. The ion-exchange mass in the heavy metal ion-exchange columns needs to be changed approximately twice per operating season as it no longer has room to bind more heavy metals. This is an expensive cost for the heating and combined heat and power plants that they want to minimize. This study investigated whether local sampling and analysis at a cogeneration plant of a number selected heavy metals in flue gas condensate is a good method for optimizing the purifications step with heavy metal ion-exchangers. And if this can ensure that the environmental requirements for the heavy metals in the purified flue gas condensate are met. Optimization means that the full capacity of the ion-exchange masses is utilized, i.e. that the exchange of ion-exchange masses can be reduced without risking unauthorized levels of heavy metals in the purified flue gas condensate as a result of the ion exchange masses being used for too long. The time needed for local sampling and analysis was also documented. At present, analyzes are done at accredited laboratories where it takes over two weeks to get the result and during that time much can be changes at the plant. A verification of the result of the study was also made against the result of an accredited laboratory. In this study, local analysis was made with the measuring instrument FREEDD which is based on quartz crystal microbalance (QCM-technology). Other options for local sampling and analysis have not been investigated. The result showed that, in the present, it is difficult to optimize the purification step with ion-exchange masses and check emissions of heavy metals with the purified flue gas condensate. To obtain reliable result, corrections to the measuring instrument and test points need to be made. The time that needs to be set aside for sampling and analysis depends on the metal, as the time for sample preparation varies. But if it can enable the plants to use the ion-exchange masses longer and gain control of the emissions of heavy metals with the purified flue gas condensate, it can be profitable to save that time.