Статті в журналах: "CO2-based technology"

1

Gao, Shiwang, Dongfang Guo, Hongguang Jin, Sheng Li, Jinyi Wang, and Shiqing Wang. "Potassium Carbonate Slurry-Based CO2 Capture Technology." Energy & Fuels 29, no. 10 (September 29, 2015): 6656–63. http://dx.doi.org/10.1021/acs.energyfuels.5b01421.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Zhumagaliyeva, А., V. Gargiulo, F. Raganat, Ye Doszhanov, and M. Alfe. "Carbon based nanocomposite material for CO2 capture technology." Горение и Плазмохимия 17, no. 1 (June 5, 2019): 9–13. http://dx.doi.org/10.18321/cpc283.

Повний текст джерела

Анотація:

Carbon capture and sequestration contains a group of technologies keeping thedifferentiation of CO2 from large industrial and energy related sources, transport toa storage location and long-term isolation from the atmosphere. Previous studiesof CO2 adsorption on low-cost iron metal oxide surfaces strongly encourage thepossible use of metal oxide as sorbents, but the tendency of magnetite particles toagglomerate causes a lowering of CO2 sorption capacity. This work investigates theadsorption behavior of CO2 on composite materials prepared coating a low-costcarbonized rice husk (cRH), commercial carbon black (CB) with magnetite fineparticles. The CO2 capture capacity of composites and based on rice husk materialswas evaluated the basis of the breakthrough times measured at atmosphericpressure and room temperature in a lab-scale fixed bed micro-reactor. To thisaim the reactor has been firstly operated for CO2 adsorption data with obtainedsamples.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Wang, Xiaolin, Shufan Yang, Hai Zhang, Xingguang Xu, Colin D. Wood, and Wojciech Lipiński. "Amine infused hydrogel-based CO2 gas storage technology for CO2 hydrate-based cold thermal energy storage." Journal of CO2 Utilization 53 (November 2021): 101705. http://dx.doi.org/10.1016/j.jcou.2021.101705.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Архипов, В. Н., А. А. Анкудинов, А. А. Мочалова, С. А. Ященко, and Г. В. Улыбышев. "CCUS technology from theory to practice." Нефтяная провинция 1, no. 4(36) (December 30, 2023): 166–76. http://dx.doi.org/10.25689/np.2023.4.166-176.

Повний текст джерела

Анотація:

В статье описан подход к комплексной оценке технологии закачки CO2 в нефтяной низкопроницаемый пласт с целью повышения нефтеотдачи, подразумевающий: набор лабораторных экспериментов, включающий тест на тонкой трубке, Swell и VIT тесты, а также комплекс потоковых исследований на керне; формирование предпосылок для композиционной гидродинамической модели с адаптацией на результаты лабораторных исследований; подбор оптимальной программы опытно-промышленных работ и стратегии промышленной эксплуатации месторождения с закачкой CO2 на основе технико-экономической оценки. The paper discusses comprehensive assessment of CO2-EOR method based on CO2 injection into a low-permeability reservoir to enhance oil recovery. It involves a number of laboratory experiments, including slim-tube test, swell and VIT tests, as well as a suite of core flow studies; generation of prerequisites for a compositional reservoir simulation model with history matching using laboratory test results; selection of optimum pilot project program and commercial field development strategy with application of CO2-EOR technology based on feasibility study.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Espatolero, Sergio, and Luis M. Romeo. "Optimization of Oxygen-based CFBC Technology with CO2 Capture." Energy Procedia 114 (July 2017): 581–88. http://dx.doi.org/10.1016/j.egypro.2017.03.1200.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Liu, Xiaolei, Caifang Wu, and Kai Zhao. "Feasibility and Applicability Analysis of CO2-ECBM Technology Based on CO2–H2O–Coal Interactions." Energy & Fuels 31, no. 9 (August 30, 2017): 9268–74. http://dx.doi.org/10.1021/acs.energyfuels.7b01663.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Liu, Yudong, Guizhou Ren, Honghong Shen, Gang Liu, and Fangqin Li. "Technology of CO2 capture and storage." E3S Web of Conferences 118 (2019): 01046. http://dx.doi.org/10.1051/e3sconf/201911801046.

Повний текст джерела

Анотація:

This paper studies carbon capture and storage based on carbon emission. There are three main technical routes for CO2 emission reduction: pre-combustion capture, oxygen-rich combustion, and post-combustion capture; CO2 separation technology mainly includes: chemical absorption method, solid adsorption method, membrane separation method. CO2 capture needs to be transported to a special place for storage, which can be generally divided into geological storage, marine storage and chemical storage. Future carbon capture research will focus on cost savings and energy savings.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Yang, Zhibin, Ze Lei, Ben Ge, Xingyu Xiong, Yiqian Jin, Kui Jiao, Fanglin Chen, and Suping Peng. "Development of catalytic combustion and CO2 capture and conversion technology." International Journal of Coal Science & Technology 8, no. 3 (June 2021): 377–82. http://dx.doi.org/10.1007/s40789-021-00444-2.

Повний текст джерела

Анотація:

AbstractChanges are needed to improve the efficiency and lower the CO2 emissions of traditional coal-fired power generation, which is the main source of global CO2 emissions. The integrated gasification fuel cell (IGFC) process, which combines coal gasification and high-temperature fuel cells, was proposed in 2017 to improve the efficiency of coal-based power generation and reduce CO2 emissions. Supported by the National Key R&D Program of China, the IGFC for near-zero CO2 emissions program was enacted with the goal of achieving near-zero CO2 emissions based on (1) catalytic combustion of the flue gas from solid oxide fuel cell (SOFC) stacks and (2) CO2 conversion using solid oxide electrolysis cells (SOECs). In this work, we investigated a kW-level catalytic combustion burner and SOEC stack, evaluated the electrochemical performance of the SOEC stack in H2O electrolysis and H2O/CO2 co-electrolysis, and established a multi-scale and multi-physical coupling simulation model of SOFCs and SOECs. The process developed in this work paves the way for the demonstration and deployment of IGFC technology in the future.

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Ignatusha, Pavlo, Haiqing Lin, Noe Kapuscinsky, Ludmila Scoles, Weiguo Ma, Bussaraporn Patarachao, and Naiying Du. "Membrane Separation Technology in Direct Air Capture." Membranes 14, no. 2 (January 24, 2024): 30. http://dx.doi.org/10.3390/membranes14020030.

Повний текст джерела

Анотація:

Direct air capture (DAC) is an emerging negative CO2 emission technology that aims to introduce a feasible method for CO2 capture from the atmosphere. Unlike carbon capture from point sources, which deals with flue gas at high CO2 concentrations, carbon capture directly from the atmosphere has proved difficult due to the low CO2 concentration in ambient air. Current DAC technologies mainly consider sorbent-based systems; however, membrane technology can be considered a promising DAC approach since it provides several advantages, e.g., lower energy and operational costs, less environmental footprint, and more potential for small-scale ubiquitous installations. Several recent advancements in validating the feasibility of highly permeable gas separation membrane fabrication and system design show that membrane-based direct air capture (m-DAC) could be a complementary approach to sorbent-based DAC, e.g., as part of a hybrid system design that incorporates other DAC technologies (e.g., solvent or sorbent-based DAC). In this article, the ongoing research and DAC application attempts via membrane separation have been reviewed. The reported membrane materials that could potentially be used for m-DAC are summarized. In addition, the future direction of m-DAC development is discussed, which could provide perspective and encourage new researchers’ further work in the field of m-DAC.

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Bardeau, Tiphaine, Raphaelle Savoire, Maud Cansell, and Pascale Subra-Paternault. "Recovery of oils from press cakes by CO2-based technology." OCL 22, no. 4 (May 1, 2015): D403. http://dx.doi.org/10.1051/ocl/2015004.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Gao, Lu, Ying Zang, Guangwu Zhao, Hengnian Qi, Qizhe Tang, Qingshan Liu, and Liangquan Jia. "Research on the Seed Respiration CO2 Detection System Based on TDLAS Technology." International Journal of Optics 2023 (March 22, 2023): 1–13. http://dx.doi.org/10.1155/2023/8017726.

Повний текст джерела

Анотація:

The traditional detection method of CO2 concentration in seed respiration has defects such as low detection accuracy, low detection efficiency, and inability to monitor in real time. In order to solve these problems, we report a seed respiration CO2 detection system based on wavelength modulation spectroscopy (WMS) techniques in tunable diode laser absorption spectroscopy (TDLAS). This system uses a 2004 nm distributed feedback (DFB) laser as the light source, and a double-layer seed respiration device (about 1.5 L) is designed based on Herriott cell with an effective optical path of about 21 meters. Then, the second harmonic (2f) signal is extracted by the wavelength modulation method for CO2 concentration inversion. When the ambient temperature and pressure changes greatly, the corrected 2f signal is used for CO2 concentration inversion to improve the accuracy. A series of verification and comparison experiments have proved that the seed respiration CO2 detection system has the advantages of strong stability, high sampling frequency, and high detection accuracy. Finally, we used the developed system to measure the respiration intensity and respiration rate of 1 g corn seeds. The respiration intensity curves and respiration rate change details show that the seed respiration CO2 detection system is more suitable for a small amount of seeds than nondispersive infrared (NDIR) CO2 sensor and gas chromatography in real-time monitoring of the breathing process.

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Xing, Yi, Zhiliang Ma, Wei Su, Qunhui Wang, Xiaona Wang, and Hui Zhang. "Analysis of Research Status of CO2 Conversion Technology Based on Bibliometrics." Catalysts 10, no. 4 (March 30, 2020): 370. http://dx.doi.org/10.3390/catal10040370.

Повний текст джерела

Анотація:

The concentration of carbon dioxide in the air has risen sharply due to the use of fossil fuels, causing environmental problems such as the greenhouse effect, which seriously threatens humans’ living environment. Reducing carbon dioxide emissions while addressing energy shortages requires the conversion of CO2 into high added-value products. In this paper, the status of CO2 conversion research in the past ten years is analyzed using the bibliometric method; the influence of countries and institutions, journal article statistics and other aspects are statistically analyzed, and the research status of carbon dioxide catalytic conversion is briefly introduced. Finally, according to the analysis results and the existing problems of CO2 catalytic conversion research, the future development direction of CO2 catalytic conversion research is prospected.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Pratiwi, Vibianti Dwi, Renanto Renanto, Juwari Juwari, Ali Altway, and Rendra Panca Anugraha. "COST ANALYSIS OF THE PERFORMANCE OF CO2 SEPARATION WITH VARIOUS CO2 CONCENTRATIONS FROM GAS WELLS." Journal of Chemical Technology and Metallurgy 59, no. 4 (July 5, 2024): 935–44. http://dx.doi.org/10.59957/jctm.v59.i4.2024.24.

Повний текст джерела

Анотація:

The technical and economic challenges are enormous in developing gas wells with a high CO2 content (> 50 mol %), such as the East Natuna gas field, which has 71 mol % (86 mass %). Carbon capture technology in gas wells with high CO2 content is studied to find a more economical one. In this study, the technology for capturing high concentrations of CO2 is varied from gas wells, Controlled Freeze Zone (CFZ), and cryogenic distillation which will be analyzed based on cost. Variations in the CO2 content of gas wells are 75 %, 80 %, 85 %, 90 %, and 95 % in mass fraction simulated using Aspen Plus V.11.0. Based on this research, CFZ technology and cryogenic distillation can obtain purity up to 99 % and recovery above 78 %. However, the total annual cost (annual capital and operating costs) of CFZ technology is lower than cryogenic distillation technology, so CFZ technology is suitable for capturing CO2 in gas wells with high CO2 content.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Liu, Tianqi. "Hydrate-Based Carbon Dioxide Capture Technology in the Ocean: Research Advances and Challenges." Advances in Engineering Technology Research 8, no. 1 (November 15, 2023): 601. http://dx.doi.org/10.56028/aetr.8.1.601.2023.

Повний текст джерела

Анотація:

The urgent need for emission reduction due to climate change has spurred the development of carbon capture and storage (CCS) technologies, with carbon dioxide (CO2) hydrates emerging as a promising option due to their high storage capacity and cost-effectiveness. This paper provides an overview of the characteristics and formation mechanisms of CO2 hydrates, along with an exploration of mechanical and chemical methods to enhance CO2 hydrate formation. Thermodynamic additives are beneficial for reducing the formation pressure of CO2 hydrate, while mechanical methods and kinetic promoters play a positive role in improving kinetic parameters, especially when both are combined. To investigate the effectiveness of kinetic and thermodynamic promoters, this study explores the impact of various promoters on induction time, formation rate, phase equilibrium, and gas consumption. Additionally, the existing challenges of CO2 hydrate are discussed, and the future research directions are proposed. Based on this study, the hydrate method of CO2 capture technology is expected to assume a crucial role in marine carbon capture technology.

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Lou, Di Ming, Si Li Qian, Zhi Yuan Hu, and Pi Qiang Tan. "On-Road Gaseous Emission Characteristics of the Bus Based on DOC + CDPF Technology." Advanced Materials Research 726-731 (August 2013): 2234–40. http://dx.doi.org/10.4028/www.scientific.net/amr.726-731.2234.

Повний текст джерела

Анотація:

In this paper, an experimental investigation was conducted using Vehicle Emission Testing System to study on-road gaseous emissions (CO, THC, NOX, CO2) characteristics based on diesel oxidation catalyst (DOC) and catalyzed diesel particulate filter (CDPF) technology. The results show that after the implementation of DOC + CDPF device, CO, THC emissions are significantly reduced, while the NOX, CO2 emissions remain almost the same. Under steady conditions, the reduction percentages of CO, THC, NOX, CO2 emission factors are 56.0%, 66.0%, 18.3%, 17.5%, respectively. Under transient operation conditions, the reduction percentages of CO, THC, NOX, CO2 emission factors are found to be 43.2%, 65.9%, 13.7%, 10.9%, respectively. Addition to the THC emission factor, the emission factors of CO, NOX and CO2 in transient operation conditions are higher than steady conditions.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Manovic, Vasilije, and Edward Anthony. "Improvement of CaO-based sorbent performance for CO2 looping cycles." Thermal Science 13, no. 1 (2009): 89–104. http://dx.doi.org/10.2298/tsci0901089m.

Повний текст джерела

Анотація:

This paper presents research on CO2 capture by lime-based looping cycles. This is a new and promising technology that may help in mitigation of global warming and climate change caused primarily by the use of fossil fuels. The intensity of the anticipated changes urgently requires solutions such as the developing technologies for CO2 capture, especially those based on CaO looping cycles. This technology is at the pilot plant demonstration stage and there are still significant challenges that require solutions. The technology is based on a dual fluidized bed reactor which contains a carbonator - a unit for CO2 capture, and a calciner - a unit for CaO regeneration. The major technology components are well known from other technologies and easily applicable. However, even though CaO is a very good candidate as a solid CO2 carrier, its performance in a practical system still has significant limitations. Thus, research on CaO performance is critical and this paper discusses some of the more important problems and potential solutions that are being examined at CETC-O.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Roth, Elliot A., Sushant Agarwal, and Rakesh K. Gupta. "Nanoclay-Based Solid Sorbents for CO2 Capture." Energy & Fuels 27, no. 8 (March 29, 2013): 4129–36. http://dx.doi.org/10.1021/ef302017m.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Jiang, Kaiqi, Hai Yu, Jianglong Yu, and Kangkang Li. "Advancement of ammonia-based post-combustion CO2 capture technology: Process modifications." Fuel Processing Technology 210 (December 2020): 106544. http://dx.doi.org/10.1016/j.fuproc.2020.106544.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Yang, Mingjun, Yongchen Song, Lanlan Jiang, Yuechao Zhao, Xuke Ruan, Yi Zhang, and Shanrong Wang. "Hydrate-based technology for CO2 capture from fossil fuel power plants." Applied Energy 116 (March 2014): 26–40. http://dx.doi.org/10.1016/j.apenergy.2013.11.031.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

McLarnon, Christopher R., and Joanna L. Duncan. "Testing of Ammonia Based CO2 Capture with Multi-Pollutant Control Technology." Energy Procedia 1, no. 1 (February 2009): 1027–34. http://dx.doi.org/10.1016/j.egypro.2009.01.136.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Jiang, Guodong, Qinglin Huang, Saeed Danaei Kenarsari, Xin Hu, Armistead G. Russell, Maohong Fan, and Xiaodong Shen. "A new mesoporous amine-TiO2 based pre-combustion CO2 capture technology." Applied Energy 147 (June 2015): 214–23. http://dx.doi.org/10.1016/j.apenergy.2015.01.081.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Zhang, Siyuan, Chen Liang, Zhiping Zhu, and Ruifang Cui. "Experimental Study on the Thermal Reduction of CO2 by Activated Solid Carbon-Based Fuels." Energies 17, no. 9 (May 1, 2024): 2164. http://dx.doi.org/10.3390/en17092164.

Повний текст джерела

Анотація:

For achieving CO2 thermal reduction, a technology combining solid carbon activation and high-temperature CO2 reduction was proposed, named as activated-reduction technology. In this study, this technology is realized by using a circulating fluidized bed and downdraft reactor. Reduced agent parameters (O2/C and CO2 concentration) greatly affect the reduction effect of CO2. In addition, the effect of the activation process on different carbon-based materials can help to broaden the range of carbon-based materials used for CO2 reduction, which is also an important issue. The following three points have been studied through experiments: (1) the influence of the characteristics of the reduced agent (CO2 concentration and O2/C) on CO2 reduction; (2) the performance of different chars in CO2 reduction; and (3) the activation effect of solid carbon. The activation process can develop the pore structure of coal gasification char and transform it into activated char with higher reactivity. The CO concentration in the tail gas is a crucial factor limiting the effectiveness of CO2 reduction, with an experimentally determined upper limit of around 55% at 1200 °C. If CO concentration is far from the upper limit, temperature becomes the significant influencing factor. When the reduced agent O2/C is 0.18, the highest net CO2 reduction of 0.021 Nm3/kg is achieved at 60% CO2 concentration. When the reduced agent CO2 concentration is 50%, the highest net CO2 reduction of 0.065 Nm3/kg is achieved at 0.22 O2/C. Compared with CPGC, YHGC has higher reactivity and is more suitable for CO2 reduction. The activation process helps to reduce the differences between raw materials.

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Lu, Yanjun, Jinxuan Han, Manping Yang, Xingyu Chen, Hongjian Zhu, and Zhaozhong Yang. "Molecular simulation of supercritical CO2 extracting organic matter from coal based on the technology of CO2-ECBM." Energy 266 (March 2023): 126393. http://dx.doi.org/10.1016/j.energy.2022.126393.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Ho, Quyen Bao Thuy, and Akira Suzuki. "TECHNOLOGY OF MUSHROOM CULTIVATION." Vietnam Journal of Science and Technology 57, no. 3 (June 4, 2019): 265. http://dx.doi.org/10.15625/2525-2518/57/3/12954.

Повний текст джерела

Анотація:

Mushroom cultivation has been developed by two ways, i. e., one based on cultivation by wood-log and another based on cultivation by non-wood-log. Non-wood-log cultivation would be categorized into two aspects. Mushroom cultivation under non-aseptic condition, i. e., one characterized by the processes of fermentation (composting) and casing, and another characterized by using sterilized media followed by cultivation process associated with strict control of environmental factors such as light, temperature, humidity, and CO2 concentration.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Feng, Da-Ming, Ying Sun, Zhao-Qing Liu, Yun-Pei Zhu, and Tian-Yi Ma. "Designing Nanostructured Metal-Based CO2 Reduction Electrocatalysts." Journal of Nanoscience and Nanotechnology 19, no. 6 (June 1, 2019): 3079–96. http://dx.doi.org/10.1166/jnn.2019.16648.

Повний текст джерела

Анотація:

Capture and conversion of CO2 into value-added chemicals and fuels is one of the most sought-after hot points at the scientific frontier. Driven by renewable energy derived electricity, the heterogeneous electrocatalyic CO2 reduction has attracted intensive interests because of the easy manipulation and high-energy-density fuels supply. Metals with general abundance and robust ability for activating CO2 have been adopted as the core-atom for developing advanced CO2 reduction electrocatalysts. As the dramatic development of nano-technology, the nanostructured metal-based materials become promising candidates for various catalytic systems. In this Review article, a general introduction and principles applied in CO2 electroreduction are summarized and discussed. Then the proposed reaction pathways of the CO2 reduction were classified and elaborated depending on the products. The state of the art advances related to the nanostructured metallic electrocatalysts are addressed as well. At last, the remaining challenges and further prospects for the construction of new nanostructured electrocatalysts for CO2 reduction and improvement of existing ones have been presented.

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Yang, Haoran, Mian Wei, Baodong Wang, Leqi Wang, Qiuyan Chen, Chang Su, Yongcheng Feng, Xing Wang, and Ke Li. "Research on the Influence of a Magnesium-Based Carbon Dioxide Battery System on CO2 Storage Performance." Processes 12, no. 9 (September 4, 2024): 1896. http://dx.doi.org/10.3390/pr12091896.

Повний текст джерела

Анотація:

At present, the energy consumption and carbon emissions of maritime transportation have raised concerns about environmental issues. A potential way to reduce carbon emissions from vessels is the use of chemical-based carbon capture and storage (CCS) technology. However, this technology faces challenges such as high energy consumption, large space occupation, and high processing costs. Therefore, the development of a technology with low energy consumption and compact CO2 storage is crucial to promote the advancement of CCS technology. This paper introduces a magnesium CO2 battery system that converts CO2 into new energy, in the form of hydrogen, while storing CO2. By preparing highly efficient catalytic electrodes and testing the electrolyte and CO2 flow rate on the battery performance, the optimal process parameters were determined to be Pd/CeO2-oct for the electrodes, a 0.5 mol/L NaOH solution for the electrolyte, and a CO2 flow rate of 1 L/h. The battery system demonstrated high cycling stability and conversion efficiency at a current density of 8 mA·cm−2, with a stable cycling time of 600 min (20 cycles), a cathode hydrogen production of 10.135 mL, and a Faraday efficiency of 97.03%.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Hamid, Hira, Khurram Jawad, Rizwana Hayat, Shoaib Ghulam, and Shahzad Hussain. "Financial Inclusion, Technology Innovation and CO2 Emissions: International Evidence." Qlantic Journal of Social Sciences and Humanities 5, no. 3 (September 30, 2024): 222–33. http://dx.doi.org/10.55737/qjssh.587103550.

Повний текст джерела

Анотація:

This research examines the elaborate association between FI, CO2 emissions, and the moderating role of technological innovation across 83 countries. The study, which includes the years 2003 to 2022, uses data from the WDI to investigate the dynamics and consequences of these interrelated factors. The major goal is to determine the influence of FI on CO2 emissions, taking into consideration the moderating role of technical progress. Through principal component analysis, the study seeks to understand the underlying mechanisms driving these associations by employing various statistical approaches such as correlation analysis and Driscoll-Kraay standard errors. Initial data show a significant link between FI and CO2 emissions, but the degree of the association varies by nation. Furthermore, technological innovation has been shown to have a significant moderating effect, increasing the effect of FI on CO2 emissions. Based on these findings, the research suggests policies that make use of the associations between FI and technological innovation in order to promote sustainable development. Overall, this study advances our consideration of the complex relationship between FI, CO2 emissions, and technological innovation, providing significant insights for policymakers and stakeholders working for environmental sustainability and economic inclusiveness.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Chassé, Melissa, Raktim Sen, Alain Goeppert, G. K. Surya Prakash, and Neil Vasdev. "Polyamine based solid CO2 adsorbents for [11C]CO2 purification and radiosynthesis." Journal of CO2 Utilization 64 (October 2022): 102137. http://dx.doi.org/10.1016/j.jcou.2022.102137.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Ishaq, Haris, and Curran Crawford. "CO2‑based alternative fuel production to support development of CO2 capture, utilization and storage." Fuel 331 (January 2023): 125684. http://dx.doi.org/10.1016/j.fuel.2022.125684.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Monni, Noemi, Eduardo Andres-Garcia, Katia Caamaño, Víctor García-López, Juan Modesto Clemente-Juan, Mónica Giménez-Marqués, Mariangela Oggianu, et al. "A thermally/chemically robust and easily regenerable anilato-based ultramicroporous 3D MOF for CO₂ uptake and separation." Journal of Materials Chemistry A 9, no. 44 (2021): 25189–95. http://dx.doi.org/10.1039/d1ta07436a.

Повний текст джерела

Анотація:

A novel anilato-based 3D ultramicroporous MOF is reported, displaying a significant balance of high CO2 separation from CO2:N2 and CO2:CH4 gas mixtures, high thermal stability and high regenerability, a challenge in the separation technology industry.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Murthy, Pradeep S., Weibin Liang, Yijiao Jiang, and Jun Huang. "Cu-Based Nanocatalysts for CO2 Hydrogenation to Methanol." Energy & Fuels 35, no. 10 (May 5, 2021): 8558–84. http://dx.doi.org/10.1021/acs.energyfuels.1c00625.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Metrikaitytė Gudelė, Gustė, and Jūratė Sužiedelytė Visockienė. "APPLICATION OF REMOTE SENSING FOR MONITORING CARBON FARMING: A REVIEW." Mokslas - Lietuvos ateitis 15 (August 21, 2023): 1–6. http://dx.doi.org/10.3846/mla.2023.19396.

Повний текст джерела

Анотація:

This research article presents an overview of the role of carbon farming in mitigating climate change by sequestering carbon in soil and vegetation. The article highlights the potential of remote sensing technology for monitoring carbon farming practices and CO2 absorption. Carbon farming practices, such as conservation tillage, cover cropping, crop rotation, and agroforestry, are discussed. The article explains the application of remote sensing technology, including satellite-based remote sensing, aerial photography, and ground-based sensors, in monitoring changes in carbon sequestration and CO2 absorption. The article concludes that remote sensing technology provides a powerful tool for monitoring carbon farming and CO2 absorption and is likely to become even more effective in the future as technology continues to advance.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Huang, Yuan Sheng, and Jie Xu. "Research on Carbon Emission Measurement of Electricity Sector Based on Scenario Analysis Method." Applied Mechanics and Materials 367 (August 2013): 327–32. http://dx.doi.org/10.4028/www.scientific.net/amm.367.327.

Повний текст джерела

Анотація:

Delivering a low-carboneconomy puts ourselves on a path to cut CO2 emission, which is the maincontributor to global warming. Developing low-carbon technology in electricityindustry will play an important role in future since electricity always beingthe biggest emission source. This paper analysis electricity carbon emissions usedscenario analysis method in Baoding, forecasts power load based on economictargets and energy efficiency targets, and analysis CO2 emissions by coal powernew technology application scenarios, and then ,carried out some suggestions onthe electricity sector’s CO2 emission reduction work used the analysis results.

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Zhang Zhiyan, 张志研, 牛奔 Niu Ben, 高文焱 Gao Wenyan, 侯玮 Hou Wei, and 林学春 Lin Xuechun. "Splicing Technology of Fiber Large Diameter End-Cap Based on CO2 Laser." Chinese Journal of Lasers 41, no. 7 (2014): 0703001. http://dx.doi.org/10.3788/cjl201441.0703001.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Ruiz, Claudia, Luis Rincón, Ricardo R. Contreras, Claudio Sidney, and Jorge Almarza. "Sustainable and Negative Carbon Footprint Solid-Based NaOH Technology for CO2 Capture." ACS Sustainable Chemistry & Engineering 8, no. 51 (December 16, 2020): 19003–12. http://dx.doi.org/10.1021/acssuschemeng.0c07093.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Yang, Mingjun, Yongchen Song, Lanlan Jiang, Yu Liu, and Xiaojing Wang. "Behaviour of hydrate-based technology for H2/CO2 separation in glass beads." Separation and Purification Technology 141 (February 2015): 170–78. http://dx.doi.org/10.1016/j.seppur.2014.11.019.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Nakamura, Shiko, Yasuro Yamanaka, Toshiya Matsuyama, Shinya Okuno, and Hiroshi Sato. "IHI s Amine-Based CO2 Capture Technology for Coal Fired Power Plant." Energy Procedia 37 (2013): 1897–903. http://dx.doi.org/10.1016/j.egypro.2013.06.070.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Carpenter, Chris. "Technology Focus: Drilling and Completion Fluids (November 2024)." Journal of Petroleum Technology 76, no. 11 (November 1, 2024): 72–73. http://dx.doi.org/10.2118/1124-0072-jpt.

Повний текст джерела

Анотація:

This year’s primary selections for the Drilling and Completion Fluids Technology Focus reflect now-well-established industrywide emphases on machine learning (ML), automation, and the achievement of successful drilling of CO2 storage wells. Enhanced methods of modeling and monitoring allow time and cost savings while surpassing safety goals and furthering efforts to optimize CO2 storage. Paper OTC 35433 discusses a study centered on accurate gel-strength estimation. The authors leverage ML techniques, particularly the use of artificial neural networks, to develop predictive models for forecasting the gel strength of synthetic oil-based mud systems at both 10-second and 10-minute intervals, surpassing the precision and speed of techniques based on traditional rotational viscometers. In a similar vein, paper SPE 216322 seeks to bypass traditional manual methods of monitoring drilling fluids, its authors describing a novel online system that measures 10 key parameters continuously. They write that the system has been field-trialed across 200 wells with results that highlight the system’s reliability, with continuous operation for over 125 days. Finally, paper SPE 217711 involves evaluating the effects of an influx of CO2 into drilling fluids, a key task in the drilling of CO2 storage wells. Concentrating on oil-based drilling fluid, the presented study describes the development and integration of models for properties of drilling-fluid/CO2 mixtures into an existing software suite. Recommended-reading papers include an investigation of the use of microwave power in recovering oil from contaminated drill cuttings, reduction of the carbon footprint of drilling fluids, and sedimentation behavior of particles in fibrous sweep fluids. As always, the long-sighted ambition of such research, and the skill applied in its pursuit, reflects the commitment to excellence embodied by the authors of technical papers presented at SPE conferences. Recommended additional reading at OnePetro: www.onepetro.org. SPE 217140 Microwave-Assisted Technique for Oil Recovery From Oily Sludge Shale Drilled Cuttings by A. Agi, Universiti Malaysia Pahang, et al. OTC 34667 Successful Decarbonization of Drilling Fluids by Using Highly Efficient Technology and Reduced Chemical Usage, Logistics, and Casing Sections by Gerardo Jardinez, Pemex, et al. SPE 218631 Application of Machine-Learning Method for Modeling Settling Behavior of a Spherical Particle in Fibrous Drilling Fluids by R.M. Elgaddafi, Australian University, et al.

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Irani, Milad, Mahsa Mehrara, Parisa Mojaver, and Ata Chitsaz. "Post-combustion emission control of a gas turbine cooperated solar assisted CO2 based-reforming utilizing CO2 capture technology." Journal of CO2 Utilization 56 (February 2022): 101847. http://dx.doi.org/10.1016/j.jcou.2021.101847.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Li, Qiaoyun, Zhengfu Ning, Shuhong Wu, Baohua Wang, Qiang Li, and Hua Li. "A Multiphase and Multicomponent Model and Numerical Simulation Technology for CO2 Flooding and Storage." Energies 17, no. 13 (June 30, 2024): 3222. http://dx.doi.org/10.3390/en17133222.

Повний текст джерела

Анотація:

In recent years, CO2 flooding has become an important technical measure for oil and gas field enterprises to further improve oil and gas recovery and achieve the goal of “dual carbon”. It is also one of the concrete application forms of CCUS. Numerical simulation based on CO2-EOR plays an indispensable role in the study of the mechanism of CO2 flooding and buried percolation, allowing for technical indicators to be selected and EOR/EGR prediction to be improved for reservoir engineers. This paper discusses the numerical simulation techniques related to CO2 flooding and storage, including mathematical models and solving algorithms. A multiphase and multicomponent mathematical model is developed to describe the flow mechanism of hydrocarbon components–CO2–water underground and to simulate the phase diagram of the components. The two-phase P-T flash calculation with SSI (+DEM) and the Newton method is adopted to obtain the gas–liquid phase equilibrium parameters. The extreme value judgment of the TPD function is used to form the phase stability test and miscibility identification model. A tailor-made multistage preconditioner is built to solve the linear equation of the strong-coupled, multiphase, multicomponent reservoir simulation, which includes the variables of pressure, saturation, and composition. The multistage preconditioner improves the computational efficiency significantly. A numerical simulation of CO2 injection in a carbonate reservoir in the Middle East shows that it is effective for researching the recovery factor and storage quantity of CO2 flooding based on the above numerical simulation techniques.

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Tamilarasan, Saravana Kumar, Jobel Jose, Vignesh Boopalan, Fei Chen, Senthil Kumar Arumugam, Jishnu Chandran Ramachandran, Rajesh Kanna Parthasarathy, Dawid Taler, Tomasz Sobota, and Jan Taler. "Recent Developments in Supercritical CO2-Based Sustainable Power Generation Technologies." Energies 17, no. 16 (August 13, 2024): 4019. http://dx.doi.org/10.3390/en17164019.

Повний текст джерела

Анотація:

Global warming and environmental pollution from greenhouse gas emissions are hitting an all-time high consistently year after year. In 2022, energy-related emissions accounted for 87% of the overall global emissions. The fossil fuel-based conventional power systems also need timely upgrades to improve their cycle efficiency and reduce their impact on the environment. Supercritical CO2 systems and cycles are gaining attention because of their higher efficiencies and their compatibility with varied energy sources. The present work is a detailed overview of the recent developments in supercritical CO2-based power generation technologies. The supercritical CO2-based Brayton and Rankine power cycles and their improvisations in industrial applications are also discussed in detail. The advances in heat exchanger technology for supercritical CO2 systems are another focus of the study. The energy, exergy, and economical (3E) analysis is carried out on various supercritical CO2 power cycles reported in the literature and the data are concisely and intuitively presented. The review concludes by listing the identified directions for future technology development and areas of immediate research interest. A roadmap is proposed for easing the commercialization of supercritical CO2 technologies to immediately address the growing challenges and concerns arising from energy-related emissions.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Wang, Fangtian, and Jinghong Yan. "CO2 Storage and Geothermal Extraction Technology for Deep Coal Mine." Sustainability 14, no. 19 (September 28, 2022): 12322. http://dx.doi.org/10.3390/su141912322.

Повний текст джерела

Анотація:

This paper aims at reducing greenhouse gas emissions, which contributes to carbon neutrality, and, at the same time, preventing mine heat disasters and extracting highly mineralized (HM) mine water, so as to realize the synergy between CO2 storage (CS) and geothermal extraction and utilization (GEU) in a high temperature (HT) goaf. With this purpose, an innovative CS-GEU technology for HT and HM water in deep mine is proposed, based on the mechanism of water-rock-CO2 effect (WRCE) and the principle of GEU in the mine. This technology uses GEU to offset the costs of CO2 storage and refrigeration in HT mine. A general scheme for a synergistic system of CS and GEU in the goaf is designed. The feasibility of CS-GEU technology in the deep goaf is demonstrated from the views of CS and GEU in the goaf and the principles of a synergistic system. It is clarified that the CO2 migration-storage evolution and the multi-field coupling principle in the goaf are the key scientific issues in realizing the synergic operation of CS and GEU. It proposes the key techniques involved in this process: CO2 capture and CO2 transportation, layout and support of drill holes and high-pressure (HP) pipelines, and HP sealing in the goaf. The research results provide new ideas for CS and GEU of HT and HM mine water in deep mine.

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Yatagai, Kohei, Yuto Shishido, Ryota Gemma, Torben Boll, Haru-Hisa Uchida, and Kazuya Oguri. "Mechanochemical CO2 methanation over LaNi-based alloys." International Journal of Hydrogen Energy 45, no. 8 (February 2020): 5264–75. http://dx.doi.org/10.1016/j.ijhydene.2019.07.055.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Oribayo, O., A. K. Bashorun, and O. A. George. "A TECHNICAL AND ECONOMIC COMPARISON OF CO2 REMOVAL TECHNOLOGIES IN AMMONIA PRODUCTION PLANTS." Open Journal of Engineering Science (ISSN: 2734-2115) 4, no. 2 (December 31, 2023): 74–88. http://dx.doi.org/10.52417/ojes.v4i2.530.

Повний текст джерела

Анотація:

The utilization of natural gas as a primary feedstock in ammonia production has resulted in significant carbon dioxide (CO2) emissions, raising environmental concerns. Consequently, several technologies have been developed to capture and remove carbon dioxide. In this study, a comparison was conducted between two CO2 removal technologies (Amine and Benfield) in an Ammonia production plant. The evaluation was performed using rate-based modelling techniques in Aspen Plus software. A base case simulation was built and validated using figures obtained from various literature studies. Optimization and sensitivity analyses were conducted to determine optimal operating conditions. The optimized parameters were used to perform an economic analysis of both technologies based on the energy consumption, solvent regeneration efficiency, and CO2 removal efficiency. The results obtained from the comparison showed that the amine technology was more economical than the Benfield technology in terms of cost and plant efficiency. The economic analysis revealed that the amine technology had a lower Net Present value, and a shorter payback period compared to the Benfield technology. Overall, this study provides insight into the economic and operational considerations of CO2 removal technologies in ammonia production plants and recommends the use of amine technology as the preferred technology for CO2 removal in ammonia production plants.

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Ouyang, Chao, and Hsiao Wei Chen. "Value Chain Analysis for Microalgae-Based CO₂ Capture: A Case Study." Advanced Materials Research 1079-1080 (December 2014): 558–61. http://dx.doi.org/10.4028/www.scientific.net/amr.1079-1080.558.

Повний текст джерела

Анотація:

This primary goal of this study is to facilitate robust strategic decision- making regarding current and future deployment of microalgae-based CO2 capture technology. Based on Porter’s value-chain theory, a chain of activities that are common to all businesses are divided into primary and support activities. This study then attempts designs a microalgae-based CO2 capture value-chain model. This model shows that value drivers of microalgae-based CO2 capture, benefit markedly economic development. According to this value-chain model, one can choose a suitable strategy that to increases economic value. The microalgae-based CO2 capture value chain is a practical task in the development of microalgae-based CO2 capture technologies for thermal power plants. This value- chain model will guide investments and inform deployment decisions for microalgae-based CO2 capture technologies.

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Vadillo, José Manuel, Guillermo Díaz-Sainz, Lucía Gómez-Coma, Aurora Garea, and Angel Irabien. "Chemical and Physical Ionic Liquids in CO2 Capture System Using Membrane Vacuum Regeneration." Membranes 12, no. 8 (August 15, 2022): 785. http://dx.doi.org/10.3390/membranes12080785.

Повний текст джерела

Анотація:

Carbon Capture Utilization and Storage technologies are essential mitigation options to reach net-zero CO2 emissions. However, this challenge requires the development of sustainable and economic separation technologies. This work presents a novel CO2 capture technology strategy based on non-dispersive CO2 absorption and membrane vacuum regeneration (MVR) technology, and employs two imidazolium ionic liquids (ILs), [emim][Ac] and [emim][MS], with different behavior to absorb CO2. Continuous absorption–desorption experiments were carried out using polypropylene hollow fiber membrane contactors. The results show the highest desorption behavior in the case of [emim][Ac], with a MVR performance efficiency of 92% at 313 K and vacuum pressure of 0.04 bar. On the other hand, the IL [emim][MS] reached an efficiency of 83% under the same conditions. The MVR technology could increase the overall CO2 capture performance by up to 61% for [emim][Ac] and 21% for [emim][MS], which represents an increase of 26% and 9%, respectively. Moreover, adding 30%vol. demonstrates that the process was only favorable by using the physical IL. The results presented here indicate the interest in membrane vacuum regeneration technology based on chemical ILs, but further techno-economic evaluation is needed to ensure the competitiveness of this novel CO2 desorption approach for large-scale application.

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Kojčinović, Aleksa, Blaž Likozar, and Miha Grilc. "Sustainable CO2 Fixation onto Bio-Based Aromatics." Sustainability 15, no. 23 (November 26, 2023): 16321. http://dx.doi.org/10.3390/su152316321.

Повний текст джерела

Анотація:

Carboxylation reactions using carbon dioxide (CO2) as a reactant to produce new C-C bonds represent one of the most promising routes in carbon capture and utilization practices, which yield higher-atom and energy-efficient products. Kolbe–Schmitt-type reactions represent the carboxylation of aromatic compounds to their carboxylic acid derivatives. This study was the first and only to systematically investigate, thoroughly explain preparation procedures, and minutely describe the analytical methods of Kolbe–Schmitt and Marasse carboxylation of phenol. Most importantly, this study provides guidelines for the utilization of state-of-the-art technology in this century-old yet not sufficiently described reaction system. Kolbe–Schmitt carboxylation of phenol was found to be possible using sodium hydroxide (NaOH), potassium hydroxide (KOH), and sodium carbonate (Na2CO3), while the Marasse method was active only with potassium carbonate (K2CO3) as a reactant. The formation of metal phenoxide is the rate-determining step, which, however, could be more efficiently prepared under reflux. A new, simple, and repeatable HPLC method was described to identify and quantify all possible products of mono- and dicarboxylated phenols. It was found that all procedures result in the highest selectivity for salicylic acid (SA), followed by minor amounts of 4-hydroxybenzoic acid (4HBA) and 4-hydroxyisophthalic acid (4HiPh).

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Świerczek, Konrad, Hailei Zhao, Zijia Zhang, and Zhihong Du. "MIEC-type ceramic membranes for the oxygen separation technology." E3S Web of Conferences 108 (2019): 01021. http://dx.doi.org/10.1051/e3sconf/201910801021.

Повний текст джерела

Анотація:

Mixed ionic-electronic conducting ceramic membrane-based oxygen separation technology attracts great attention as a promising alternative for oxygen production. The oxygen-transport membranes should not only exhibit a high oxygen flux but also show good stability under CO2-containing atmospheres. Therefore, designing and optimization, as well as practical application of membrane materials with good CO2 stability is a challenge. In this work, apart from discussion of literature data, authors’ own results are provided, which are focused on materia - related issues, including development of electrode materials exhibiting high ionic and electronic conductivities.

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Małek, Ewelina, Tadeusz Niezgoda, and Danuta Miedzińska. "Development of Porosity Measurement Method Based on Modern Microscopic Techniques." Solid State Phenomena 240 (August 2015): 87–93. http://dx.doi.org/10.4028/www.scientific.net/ssp.240.87.

Повний текст джерела

Анотація:

The aim of the research, presented in the paper, is to show and to assess the porosity structure in accordance to the dimensions of carbon dioxide particle. The characteristic surface morphology of the sample and the visualisation of the coal porous structure have been obtained using the atomic force microscope (AFM). The presented study of the coal microstructure is a part of the concepts of the project which aim is to develop the guidelines for design of the innovative technology of shale gas recovery with the use of liquid CO2. The technology will be based on Military University of Technology invention which considers gaseous hydrocarbons recovery from at least two levels of lateral wellbores with the use of supercritical CO2, what will result with wellbore productivity increase, because CO2 will cause desorption of CH4 from the porous structure of shale rock and the thermodynamic transformation of CO2 in the reservoir will help the rock fracturing. The heat energy added for the fracturing process will be taken from the surrounding rock mass.

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Brunetti, Adele, and Enrica Fontananova. "CO2 Conversion by Membrane Reactors." Journal of Nanoscience and Nanotechnology 19, no. 6 (June 1, 2019): 3124–34. http://dx.doi.org/10.1166/jnn.2019.16649.

Повний текст джерела

Анотація:

Membrane reactors technology represents a promising tool for the CO2 capture and reuse by conversion to valuable products. After a preliminary presentation of the fundamentals of this technology, a critical overview of the last achievements and new perspectives in the CO2 conversion by membrane reactors is given, highlighting the still existing limitations for large scale applications. Among the low temperature (≤100 °C) membrane reactor for CO2 conversion, electrochemical membrane reactors and photocatalytic reactors, represent the two mainly pursued systems and they were discussed starting from selected case studies. Dry reforming of methane and CO2 hydrogenation to methanol were selected as interesting examples of high temperature (>100 °C) membrane based conversion of CO2 to energy bearing products.

Стилі APA, Harvard, Vancouver, ISO та ін.

Статті в журналах з теми "CO2-based technology"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями