Добірка наукової літератури з теми "Co-fired ceramics"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Co-fired ceramics".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Co-fired ceramics"
Mercke, William L., Thomas Dziubla, Richard E. Eitel, and Kimberly Anderson. "Biocompatibility Evaluation of Human Umbilical Vein Endothelial Cells Directly onto Low-Temperature Co-fired Ceramic Materials for Microfluidic Applications." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2012, CICMT (September 1, 2012): 000549–56. http://dx.doi.org/10.4071/cicmt-2012-tha11.
Повний текст джерелаMajer, Zdeněk, Kateřina Štegnerová, Pavel Hutař, Martin Pletz, Raul Bermejo, and Luboš Náhlík. "Residual Lifetime Determination of Low Temperature Co-Fired Ceramics." Key Engineering Materials 713 (September 2016): 266–69. http://dx.doi.org/10.4028/www.scientific.net/kem.713.266.
Повний текст джерелаWang, Rui, Ji Zhou, Hongjie Zhao, Bo Li, and Longtu Li. "Oxyfluoride glass-silica ceramic composite for low temperature co-fired ceramics." Journal of the European Ceramic Society 28, no. 15 (November 2008): 2877–81. http://dx.doi.org/10.1016/j.jeurceramsoc.2008.05.010.
Повний текст джерелаZhang, Wenli, and Richard E. Eitel. "Sintering Behavior, Properties, and Applications of Co-Fired Piezoelectric/Low Temperature Co-Fired Ceramic (PZT-SKN/LTCC) Multilayer Ceramics." International Journal of Applied Ceramic Technology 10, no. 2 (February 6, 2012): 354–64. http://dx.doi.org/10.1111/j.1744-7402.2011.02747.x.
Повний текст джерелаMakarovič, Kostja, Darko Belavič, Barbara Malič, Andreja Benčan, Franci Kovač, and Janez Holc. "Small ozone generator fabricated from low-temperature co-fired ceramics." Microelectronics International 38, no. 1 (January 12, 2021): 1–5. http://dx.doi.org/10.1108/mi-07-2020-0043.
Повний текст джерелаZhang, Yong Gang, and Xiao Gang Wu. "Dielectric Properties and Microstructure of BaO-Nd2O3-Bi2O3-TiO2 Microwave Ceramics with Li2O-B2O3-SiO2." Advanced Materials Research 906 (April 2014): 12–17. http://dx.doi.org/10.4028/www.scientific.net/amr.906.12.
Повний текст джерелаMurata, Takaki, Satoshi Ohga, and Yasutaka Sugimoto. "Development of a Novel Low Temperature Co-Fired Ceramics System Composed of Two Different Co-Firable Low Temperature Co-Fired Ceramics Materials." Japanese Journal of Applied Physics 45, no. 9B (September 22, 2006): 7401–4. http://dx.doi.org/10.1143/jjap.45.7401.
Повний текст джерелаMohanram, Aravind, Sang-Ho Lee, Gary L. Messing, and David J. Green. "Constrained Sintering of Low-Temperature Co-Fired Ceramics." Journal of the American Ceramic Society 89, no. 6 (June 2006): 1923–29. http://dx.doi.org/10.1111/j.1551-2916.2006.01079.x.
Повний текст джерелаChu, Xiang Cheng, Li Dan Ding, Xiang Yu Meng, and Long Tu Li. "Vibration and Temperature Measuring Experiments on Multilayer Piezoelectric Actuator." Advanced Materials Research 177 (December 2010): 306–9. http://dx.doi.org/10.4028/www.scientific.net/amr.177.306.
Повний текст джерелаMalecha, Karol. "Integration of Optoelectronic Components with LTCC (Low Temperature Co-Fired Ceramic) Microfluidic Structure." Metrology and Measurement Systems 18, no. 4 (January 1, 2011): 713–22. http://dx.doi.org/10.2478/v10178-011-0067-3.
Повний текст джерелаДисертації з теми "Co-fired ceramics"
Lim, Hui Fern Michele. "Low Temperature Co-fired Ceramics Technology for Power Magnetics Integration." Diss., Virginia Tech, 2008. http://hdl.handle.net/10919/30156.
Повний текст джерелаPh. D.
Shafique, Muhammad Farhan. "Laser Prototyping of Low Temperature Co-fired Ceramics for System-In-Package Applications." Thesis, University of Leeds, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.521480.
Повний текст джерелаBhutani, Akanksha [Verfasser]. "Low Temperature Co-fired Ceramics for System-in-Package Applications at 122 GHz / Akanksha Bhutani." Karlsruhe : KIT Scientific Publishing, 2019. http://d-nb.info/1196294542/34.
Повний текст джерелаZhang, Wenli. "HIGH PERFORMANCE PIEZOELECTRIC MATERIALS AND DEVICES FOR MULTILAYER LOW TEMPERATURE CO-FIRED CERAMIC BASED MICROFLUIDIC SYSTEMS." UKnowledge, 2011. http://uknowledge.uky.edu/gradschool_diss/200.
Повний текст джерелаLuo, Jin. "The Development and Biocompatibility of Low Temperature Co-Fired Ceramic (LTCC) for Microfluidic and Biosensor Applications." UKnowledge, 2014. http://uknowledge.uky.edu/cme_etds/30.
Повний текст джерелаAhyoune, Saiyd. "Heterogeneous Integration of RF and Microwave Systems Using Multi-layer Low-Temperature Co-fired Ceramics Technology." Doctoral thesis, Universitat de Barcelona, 2017. http://hdl.handle.net/10803/459117.
Повний текст джерелаEl objetivo de este trabajo es el desarrollo de una metodología de modelado para el análisis rápido, pero sin comprometer la precisión de la solución, de componentes pasivos no radiativos de RF en substratos multicapa. El método se basa en el algoritmo numérico cuasi-estático de los elementos parciales de circuito equivalente (PEEC). Éste puede ser incorporado en simuladores de circuitos; por tanto, los modelos ya están disponibles en la entrada de esquemático de forma transparente para el diseñador de circuitos. Utilizando este marco, la escalabilidad del modelo se mejora en términos de la geometría, la definición del corte tecnológico, las propiedades del material, la topología del componente y las condiciones de contorno electro-magnéticas. Esta disertación comienza mostrando las motivaciones que han llevado a su desarrollo y la capacidad real del método de resolución obtenido. A partir de aquí, se realiza la descripción de todo el desarrollo del marco numérico que se divide en tres partes que están interrelacionadas. En primer lugar, la formulación PEEC se adapta según el comportamiento electromagnético real del componente. Vale la pena subrayar que en esta formulación se utiliza una perspectiva diferente a la habitual y que está relacionada con el principio de los trabajos virtuales de d’Alembert. La segunda parte trata de cómo se evalúan los elementos parciales y constituye el núcleo principal del algoritmo. Se lleva a cabo utilizando soluciones analíticas de la función de Green (GF) del sustrato en el dominio espacial. Los elementos parciales, que forman la malla numérica del modelo, se ensamblan en la matriz del sistema siguiendo un procedimiento de análisis nodal modificado (MNA). En la última parte, se discute la importancia de la malla sobre la precisión de la solución y se propone un generador de malla basado en la física del componente y no sólo en la descripción de la geometría. Como aplicación práctica de la metodología, se realiza la generación de una biblioteca de componentes pasivos RF para sustratos multicapa.
Mercke, William L. "Diagnosis of Systemic Inflammation Using Transendothelial Electrical Resistance and Low-Temperature Co-fired Ceramic Materials." UKnowledge, 2013. http://uknowledge.uky.edu/cme_etds/21.
Повний текст джерелаBhutani, Akanksha [Verfasser], and T. [Akademischer Betreuer] Zwick. "Low Temperature Co-fired Ceramics for System-in-Package Applications at 122 GHz / Akanksha Bhutani ; Betreuer: T. Zwick." Karlsruhe : KIT-Bibliothek, 2019. http://d-nb.info/119312719X/34.
Повний текст джерелаGilham, David Joel. "Packaging of a High Power Density Point of Load Converter." Thesis, Virginia Tech, 2013. http://hdl.handle.net/10919/19325.
Повний текст джерелаOne issue with current converters is the large volume of the passive components. Increasing the switching frequency to the megahertz range is one way to reduce to volume of these components. The other way is to fundamentally change the way these inductors are designed. This work will explore the use of low temperature co-fired ceramic (LTCC) tapes in the magnetic design to allow a low profile planar inductor to be used as a substrate. LTCC tapes have excellent properties in the 1-10 MHz range that allow for a high permeability, low loss solution. These tapes are co-fired with a silver paste as the conductor. This paper looks at ways to reduce dc resistance in the inductor design through packaging methods which in turn allow for higher current operation and better heavy load efficiency. Fundamental limits for LTCC technologies are pushed past their limits during this work. This work also explores fabrication of LTCC inductors using two theoretical ideas: vertical flux and lateral flux. Issues are presented and methods are conceived for both types of designs. The lateral flux inductor gives much better inductance density which results in a much thinner design.
It is found that the active devices must be shielded from the magnetic substrate interference so active layer designs are discussed. Alumina and Aluminum Nitride substrates are used to form a complete 3D integration scheme that gives excellent thermal management even in natural convection. This work discusses the use of a stacked power technique which embeds the devices in the substrate to give double sided cooling capabilities. This fabrication goes away from traditional photoresist and solder-masking techniques and simplifies the entire process so that it can be transferred to industry. Time consuming sputtering and electroplating processes are removed and replaced by a direct bonded copper substrate which can have up to 8 mil thick copper layers allowing for even greater thermal capability in the substrate. The result is small footprint and volume with a power density 3X greater than any commercial product with comparable output currents. A two phase coupled inductor version using stacked power is also presented to achieve even higher power density.
As better device technologies come to the marketplace, higher power density designs can be achieved. This paper will introduce a 3D integration design that includes the use of Gallium Nitride devices. Gallium Nitride is rapidly becoming the popular device for high frequency designs due to its high electron mobility properties compared to silicon. This allows for lower switching losses and thus better thermal characteristics at high frequency. The knowledge learned from the stacked power processes gives insight into creating a small footprint, high current ceramic substrate design. A 3D integrated design is presented using GaN devices along with a lateral flux inductor. Shielded and Non-Shielded power loop designs are compared to show the effect on overall converter efficiency. Thermal designs and comparisons to PCB are made using thermal imaging. The result is a footprint reduction of 40% from previous designs and power densities reaching close to 900W/in3.
Master of Science
Li, Qiang. "Low-Profile Magnetic Integration for High-Frequency Point-of-Load Converter." Diss., Virginia Tech, 2011. http://hdl.handle.net/10919/28637.
Повний текст джерелаPh. D.
Частини книг з теми "Co-fired ceramics"
Rabe, Torsten, Markus Eberstein, and Wolfgang A. Schiller. "Low Temperature Co-Fired Ceramics (LTCC) - Design and Characterization of Interfaces." In Ceramic Transactions Series, 173–78. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118144145.ch27.
Повний текст джерелаBermejo, Raul, Peter Supancic, Clemens Krautgasser, and Robert Danzer. "Evaluation of Subcritical Crack Growth in Low Temperature Co-Fired Ceramics." In Mechanical Properties and Performance of Engineering Ceramics and Composites VIII, 161–72. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118807514.ch17.
Повний текст джерелаGeyer, Richard G., Liang Chai, Aziz Shaikh, and Vern Stygar. "Microwave Properties of Low-Temperature Co-Fired Ceramic Systems." In Ceramic Transactions Series, 261–85. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118380802.ch25.
Повний текст джерелаSawhill, Howard T. "Materials Compatibility and Co-Sintering Aspects in Low Temperature Co-Fired Ceramic Packages." In Cofire Technology: Ceramic Engineering and Science Proceedings, Volume 9, Issue 11/12, 1603–17. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470310519.ch5.
Повний текст джерелаMattox, Douglas M., Stephen R. Gurkovich, John A. Olenick, and Keith M. Mason. "Low Dielectric Constant, Alumina-Compatible, Co-Fired Multilayer Substrate." In Cofire Technology: Ceramic Engineering and Science Proceedings, Volume 9, Issue 11/12, 1567–78. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470310519.ch2.
Повний текст джерелаVerma, K. K. "Advantages of Co-Fired Multilayer over Thick Film Technology." In Cofire Technology: Ceramic Engineering and Science Proceedings, Volume 9, Issue 11/12, 1618–28. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470310519.ch6.
Повний текст джерелаNair, K. M., M. F. McCombs, K. E. Souders, J. M. Parisi, K. H. Hang, D. M. Nair, and S. C. Beers. "DuPontTM Green TapeTM 9K7 Low Temperature Co-fired Ceramic (LTCC) Low Loss Dielectric System for High Frequency Microwave Applications." In Ceramic Transactions Series, 213–29. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470930915.ch20.
Повний текст джерелаBirol, Hansu, Thomas Maeder, Caroline Jacq, Giancarlo Corradini, Marc Boers, Sigfrid Straessler, and Peter Ryser. "Structuration and Fabrication of Sensors Based on LTCC (Low Temperature Co-Fired Ceramic) Technology." In Key Engineering Materials, 1849–52. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.1849.
Повний текст джерелаRane, Vivek, Varsha Chaware, Shrikant Kulkarni, Siddharth Duttagupta, and Girish Phatak. "Materials for Embedded Capacitors, Inductors, Nonreciprocal Devices, and Solid Oxide Fuel Cells in Low Temperature Co-fired Ceramic." In Springer Tracts in Mechanical Engineering, 285–301. New Delhi: Springer India, 2014. http://dx.doi.org/10.1007/978-81-322-1913-2_17.
Повний текст джерелаBirol, Hansu, Thomas Maeder, and Peter Ryser. "Modification of Thick-Film Conductors Used in IP Technology for Reduction of Warpage during Co-Firing of LTCC (Low Temperature Co-Fired Ceramic) Modules." In Key Engineering Materials, 746–49. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.746.
Повний текст джерелаТези доповідей конференцій з теми "Co-fired ceramics"
van Dijk, Raymond, Gijs van der Bent, Mohamed Ashari, and Mark McKay. "Circulator integrated in low temperature co-fired ceramics technology." In 2014 44th European Microwave Conference (EuMC). IEEE, 2014. http://dx.doi.org/10.1109/eumc.2014.6986744.
Повний текст джерелаvan Dijk, Raymond, Gijs van der Bent, Mohamed Ashari, and Mark McKay. "Circulator integrated in low temperature co-fired ceramics technology." In 2014 9th European Microwave Integrated Circuits Conference (EuMIC). IEEE, 2014. http://dx.doi.org/10.1109/eumic.2014.6997928.
Повний текст джерелаMoilanen, Ville, Kari Kautio, Pentti Karioja, Raimo Rikola, Jarmo Lehtomaa, and Jouko Malinen. "Low temperature co-fired ceramics on optoelectronic sensors integration." In International Congress on Optics and Optoelectronics, edited by Francesco Baldini, Jiri Homola, Robert A. Lieberman, and Miroslav Miler. SPIE, 2007. http://dx.doi.org/10.1117/12.724158.
Повний текст джерелаStekovic, Michal, and Josef Sandera. "Fabrication of electrochemical sensor in Low Temperature Co-fired Ceramics." In 2014 37th ISSE International Spring Seminar in Electronics Technology (ISSE). IEEE, 2014. http://dx.doi.org/10.1109/isse.2014.6887567.
Повний текст джерелаQassym, L., V. Laur, R. Lebourgcois, and P. Queffelec. "Ferrimagnetic garnets for Low Temperature Co-fired Ceramics microwave circulators." In 2018 IEEE/MTT-S International Microwave Symposium - IMS 2018. IEEE, 2018. http://dx.doi.org/10.1109/mwsym.2018.8439250.
Повний текст джерелаOchi, Atsuhiko, Hikaru Setsuda, Kazuki Komiya, and Yoko Takeuchi. "Development of Micro Pixel Chamber using Low Temperature Co-fired Ceramics." In 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, 2019. http://dx.doi.org/10.1109/nss/mic42101.2019.9059907.
Повний текст джерелаLu, A. G., and T. Qiu. "Sintering and dielectric properties of CaO-B2O3-SiO2 low temperature co-fired ceramics." In 2008 International Conference on Microwave and Millimeter Wave Technology (ICMMT). IEEE, 2008. http://dx.doi.org/10.1109/icmmt.2008.4540394.
Повний текст джерелаParker, Norbert, Nicolas Ryon, Lilia Qassym, Richard Lebourgeois, Gerard Cibien, Camilla Karnfelt, Vincent Laur, Vincent Castel, and Rose-Marie Sauvage. "Ku-Band Microstrip Junction Circulators Manufactured using Low Temperature Co-fired Ceramics Technology." In 2022 Asia-Pacific Microwave Conference (APMC). IEEE, 2022. http://dx.doi.org/10.23919/apmc55665.2022.10000006.
Повний текст джерелаElelimy, A. M., and A. G. Sobih. "Multilayer tri-band BPF embedded in low temperature co-fired ceramics for modern wireless applications." In 2014 31st National Radio Science Conference (NRSC). IEEE, 2014. http://dx.doi.org/10.1109/nrsc.2014.6835086.
Повний текст джерелаKaneko, Takuya, Shogo Takagi, Risa Matsubara, and Yasushi Horii. "A compact Mobius ring bandpass filter embedded in low-temperature co-fired ceramics (LTCC) substrate." In 2012 Asia Pacific Microwave Conference (APMC). IEEE, 2012. http://dx.doi.org/10.1109/apmc.2012.6421649.
Повний текст джерелаЗвіти організацій з теми "Co-fired ceramics"
Moll, Amy J., Judi Steciak, and Donald G. Plumlee. Micro-Propulsion Devices in Low Temperature Co-Fired Ceramics. Fort Belvoir, VA: Defense Technical Information Center, February 2009. http://dx.doi.org/10.21236/ada495405.
Повний текст джерелаUribe, Fernando R., Alice C. Kilgo, John Mark Grazier, Paul Thomas Vianco, Gary L. Zender, Paul Frank Hlava, and Jerome Andrew Rejent. An analysis of the pull strength behaviors of fine-pitch, flip chip solder interconnections using a Au-Pt-Pd thick film conductor on Low-Temperature, Co-fired Ceramic (LTCC) substrates. Office of Scientific and Technical Information (OSTI), September 2008. http://dx.doi.org/10.2172/942186.
Повний текст джерелаUribe, Fernando, Paul Thomas Vianco, and Gary L. Zender. Pull strength evaluation of Sn-Pb solder joints made to Au-Pt-Pd and Au thick film structures on low-temperature co-fired ceramic -final report for the MC4652 crypto-coded switch (W80). Office of Scientific and Technical Information (OSTI), June 2006. http://dx.doi.org/10.2172/887252.
Повний текст джерела