Статті в журналах з теми "Clay-Based mixtures"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Clay-Based mixtures".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Lu, Zhen, Aimin Sha, and Wentong Wang. "Permeability Evaluation of Clay-quartz Mixtures Based on Low-Field NMR and Fractal Analysis." Applied Sciences 10, no. 5 (February 27, 2020): 1585. http://dx.doi.org/10.3390/app10051585.
Gao, Xiaojing, Qiusheng Wang, and Guowei Ma. "Experimental Investigation on the Erosion Threshold and Rate of Gravel and Silty Clay Mixtures." Transactions of the ASABE 62, no. 4 (2019): 867–75. http://dx.doi.org/10.13031/trans.13290.
Dafalla, Muawia. "Predicting Swell in Clay-Sand Mixtures Used in Liners." Applied Sciences 13, no. 20 (October 11, 2023): 11161. http://dx.doi.org/10.3390/app132011161.
Panchenko, Alexander I., Vitaliy N. Solov’ev, Nikita A. Tretyakov, Alexander D. Chernov, and Ilmir R. Shaykhalov. "Evaluation of thixotropy of clay-gypsum based plaster." Stroitel stvo nauka i obrazovanie [Construction Science and Education], no. 4 (December 31, 2019): 6. http://dx.doi.org/10.22227/2305-5502.2019.4.6.
Alqenaee, Amnah Y., Ali M. Memari, and Maryam Hojati. "TRANSITION FROM TRADITIONAL COB CONSTRUCTION TO 3D PRINTING OF CLAY HOMES." Journal of Green Building 16, no. 4 (September 1, 2021): 3–28. http://dx.doi.org/10.3992/jgb.16.4.3.
Liutyi, R., M. Fyodorov, M. Fesenko, and D. Liuta. "REGULATION OF THE PROPERTIES OF SAND-CLAY MOLDING MIXTURES BY SODIUM PHOSPHATE ADDITIONS." New Materials and Technologies in Metallurgy and Mechanical Engineering, no. 2 (June 20, 2023): 38–45. http://dx.doi.org/10.15588/1607-6885-2023-2-6.
Ni, Jing, Gang-Lai Hao, Jia-Qi Chen, Lei Ma, and Xue-Yu Geng. "The Optimisation Analysis of Sand-Clay Mixtures Stabilised with Xanthan Gum Biopolymers." Sustainability 13, no. 7 (March 26, 2021): 3732. http://dx.doi.org/10.3390/su13073732.
Asamatdinov, Marat, Ekaterina Shokodko, Andrey Ushakov, Igor Bessonov, Sergey Kozlov, and Artem Zhukov. "Composition and rheological characteristics of plaster mixtures." E3S Web of Conferences 97 (2019): 02006. http://dx.doi.org/10.1051/e3sconf/20199702006.
Bensalem, Sara, Mohamed Lyes Kamel KHOUADJIA, Kamel Abdou, Ahmed Abderraouf Belkadi, and Oussama Kessal. "Experimental Evaluation of Workability Compressive Strength and Freeze-Thaw Durability of Concrete Containing Expanded Clay Aggregates." Aceh International Journal of Science and Technology 11, no. 2 (September 5, 2022): 145–54. http://dx.doi.org/10.13170/aijst.11.2.25028.
Asamatdinov, Marat, Аlexey Zhukov, Andrey Medvedev, and Vitaly Mukhametzyanov. "Fire protection systems using clay-gypsum plaster in agriculture." E3S Web of Conferences 175 (2020): 11008. http://dx.doi.org/10.1051/e3sconf/202017511008.
Ibragimov, Marat A., Nelli N. Shishkina, and Elena G. Zinovjeva. "Reinforcement of Elastomers Based on Butadiene Rubbers and their Mixtures with Layered Silicates." Key Engineering Materials 869 (October 2020): 158–62. http://dx.doi.org/10.4028/www.scientific.net/kem.869.158.
Khadzhishalapov, G. N., T. A. Khezhev, A. M. Gadzhiev, R. G. Radjabov, and U. I. Isaeva. "Investigation of the effect of electric heating of expanded clay concrete mixture on the structure and properties of lightweight expanded clay concrete exposed to high temperatures." Herald of Dagestan State Technical University. Technical Sciences 48, no. 4 (February 12, 2022): 187–96. http://dx.doi.org/10.21822/2073-6185-2021-48-4-187-196.
Korolev, V. A., E. N. Samarin, V. A. Panfilov, and I. V. Romanova. "Sorption Properties of Brucite and Brucite-Based Clay Mixtures." Ecology and Industry of Russia 20, no. 1 (January 16, 2016): 18–24. http://dx.doi.org/10.18412/1816-0395-2016-1-18-24.
Akbarimehr, Davood, Alireza Rahai, Abolfazl Eslami, and Moses Karakouzian. "Deformation Characteristics of Rubber Waste Powder–Clay Mixtures." Sustainability 15, no. 16 (August 15, 2023): 12384. http://dx.doi.org/10.3390/su151612384.
Mollins, L. H., D. I. Stewart, and T. W. Cousens. "Predicting the properties of bentonite-sand mixtures." Clay Minerals 31, no. 2 (June 1996): 243–52. http://dx.doi.org/10.1180/claymin.1996.031.2.10.
Dalmacija, Milena, Bozo Dalmacija, Dejan Krcmar, Miljana Prica, Ljiljana Rajic, Srdjan Roncevic, and Olivera Gavrilovic. "Solidification/stabilization of metal polluted sediment of Krivaja river." Chemical Industry 66, no. 4 (2012): 469–78. http://dx.doi.org/10.2298/hemind111031110d.
Asamatdinov, M. O., I. I. Popov, S. P. Chernukhin, and Alexey D. Zhukov. "Modified Gypsum Binder for Plastering Systems." Key Engineering Materials 887 (May 2021): 428–33. http://dx.doi.org/10.4028/www.scientific.net/kem.887.428.
Al Allam, Allam Musbah, Ahmed Suliman B. Ali, Hassan M. Hassan Ali, and Isa Ali Almuhktar. "Effect of Soft Clay on the Volumetric and Mechanical Properties of Hot Mix Asphalt." مجلة الجامعة الأسمرية: العلوم التطبيقية 6, no. 5 (December 31, 2021): 186–202. http://dx.doi.org/10.59743/aujas.v6i5.1085.
Ermilova, Elizaveta, and Zagira Kamalova. "The influence of calcined mixture cooling method on hydration products composition of blended cement stone." E3S Web of Conferences 274 (2021): 04011. http://dx.doi.org/10.1051/e3sconf/202127404011.
Alves, Hugo P. A., Jaquelígia B. Silva, Liszandra F. A. Campos, Sandro M. Torres, Ricardo P. S. Dutra, and Daniel A. Macedo. "Preparation of mullite based ceramics from clay–kaolin waste mixtures." Ceramics International 42, no. 16 (December 2016): 19086–90. http://dx.doi.org/10.1016/j.ceramint.2016.09.068.
Matteson, A., J. P. Tomanic, M. M. Herron, D. F. Allen, and W. E. Kenyon. "NMR Relaxation of Clay/Brine Mixtures." SPE Reservoir Evaluation & Engineering 3, no. 05 (October 1, 2000): 408–13. http://dx.doi.org/10.2118/66185-pa.
Hamidifar, Hossein, and Mohammad Hossein Omid. "Local scour of cohesive beds downstream of a rigid apron." Canadian Journal of Civil Engineering 44, no. 11 (November 2017): 935–44. http://dx.doi.org/10.1139/cjce-2016-0398.
Kidalov, Nikolay A., Anna S. Adamova, and Viktoria V. Smirnova. "Effect of Temperature Calcinations of Clay on Strength of Moulding Mixture." Materials Science Forum 973 (November 2019): 26–29. http://dx.doi.org/10.4028/www.scientific.net/msf.973.26.
Ducasse, Etienne, Karine Adeline, Xavier Briottet, Audrey Hohmann, Anne Bourguignon, and Gilles Grandjean. "Montmorillonite Estimation in Clay–Quartz–Calcite Samples from Laboratory SWIR Imaging Spectroscopy: A Comparative Study of Spectral Preprocessings and Unmixing Methods." Remote Sensing 12, no. 11 (May 27, 2020): 1723. http://dx.doi.org/10.3390/rs12111723.
Brown, Philip J., Lambert B. McCarty, Virgil L. Quisenberry, L. Ray Hubbard, and M. Brad Addy. "Influence of Increasing Fines on Soil Physical Properties of U.S. Golf Association Sand." HortScience 54, no. 11 (November 2019): 2063–66. http://dx.doi.org/10.21273/hortsci14110-19.
Joo, Incheol, and Jongmuk Won. "Influence of Sand Grain Size and Clay Mineralogy on Suffusion of Sand-Clay Mixtures." Journal of the Korean Society of Hazard Mitigation 23, no. 2 (April 30, 2023): 91–99. http://dx.doi.org/10.9798/kosham.2023.23.2.91.
Mousavi, Seyed Sina, Chandrasekhar Bhojaraju, and Claudiane Ouellet-Plamondon. "Clay as a Sustainable Binder for Concrete—A Review." Construction Materials 1, no. 3 (September 29, 2021): 134–68. http://dx.doi.org/10.3390/constrmater1030010.
Konrad, Jean-Marie, and Martin Samson. "Hydraulic conductivity of kaolinite-silt mixtures subjected to closed-system freezing and thaw consolidation." Canadian Geotechnical Journal 37, no. 4 (August 1, 2000): 857–69. http://dx.doi.org/10.1139/t00-003.
Khedidja, Belaidi, Zedjaoui Abdeljalil, Mekerta Belkacem, Bassoud Abdelkader, and Allal Mohamed-Amine. "Evaluation of the Permeability of Clay-Lime Mixtures for Hazardous Waste Insulation Barriers, Case of Southern Algeria (Adrar)." Trends in Sciences 21, no. 7 (May 10, 2024): 7725. http://dx.doi.org/10.48048/tis.2024.7725.
Laaroussi, N., G. Lauriat, M. Garoum, A. Cherki, and Y. Jannot. "Measurement of thermal properties of brick materials based on clay mixtures." Construction and Building Materials 70 (November 2014): 351–61. http://dx.doi.org/10.1016/j.conbuildmat.2014.07.104.
Firstov, A. P., and O. I. Shevchenko. "Core mixture based on modified lignosulfonate." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 79, no. 5 (June 26, 2023): 401–5. http://dx.doi.org/10.32339/0135-5910-2023-5-401-405.
Zhang, Jun Rui, Meng Dan Xu, Georgios E. Christidis, and Chun Hui Zhou. "Clay minerals in drilling fluids: functions and challenges." Clay Minerals 55, no. 1 (March 2020): 1–11. http://dx.doi.org/10.1180/clm.2020.10.
Kohno, Masanori, Yoshitaka Nara, Masaji Kato, and Tsuyoshi Nishimura. "Effects of clay-mineral type and content on the hydraulic conductivity of bentonite–sand mixtures made of Kunigel bentonite from Japan." Clay Minerals 53, no. 4 (December 2018): 721–32. http://dx.doi.org/10.1180/clm.2018.52.
Yin, Kexin, Anne-Laure Fauchille, Khaoula Othmani, Giulio Sciarra, Panagiotis Kotronis, Yannick Benoit, Francois Bertrand, and Samuel Branchu. "Influence of sample preparation on the multi scale structure of sand-clay mixtures." E3S Web of Conferences 92 (2019): 01007. http://dx.doi.org/10.1051/e3sconf/20199201007.
Chen, Chenghao, Shengshui Chen, Shiang Mei, Shaoyang Han, Xian Zhang, and Yi Tang. "An Improved Large-Scale Stress-Controlled Apparatus for Long-Term Seepage Study of Coarse-Grained Cohesive Soils." Sensors 21, no. 18 (September 18, 2021): 6280. http://dx.doi.org/10.3390/s21186280.
Ghorbani, Ali, and Meysam Salimzadehshooiili. "Evaluation of Strength behaviour of Cement-RHA Stabilized and Polypropylene Fiber Reinforced Clay-Sand Mixtures." Civil Engineering Journal 4, no. 11 (November 30, 2018): 2628. http://dx.doi.org/10.28991/cej-03091187.
PETROV, A. M., and S. Y. SHEPTUN. "THE EFFECT OF MAN-MADE MICROFILLERS ON THE STRENGTH OF ADHESION TO THE BASE OF THE SOLUTION OF THE DRY CONSTRUCTION MIXTURE." Bridges and tunnels: Theory, Research, Practice, no. 24 (December 1, 2023): 66–71. http://dx.doi.org/10.15802/bttrp2023/291864.
V.M. Kurduymova, M.U. Uranova, and M.A. Baituganova. "WALL PRODUCTS ON THE BASIS OF STRAW AND ALKALINE BINDERS." Herald of KSUCTA n a N Isanov, no. 2 (June 24, 2019): 303–6. http://dx.doi.org/10.35803/1694-5298.2019.2.303-306.
Widomski, Marcin K., Anna Musz-Pomorska, and Wojciech Franus. "Hydraulic and Swell–Shrink Characteristics of Clay and Recycled Zeolite Mixtures for Liner Construction in Sustainable Waste Landfill." Sustainability 13, no. 13 (June 29, 2021): 7301. http://dx.doi.org/10.3390/su13137301.
La Noce, Michele, Alessandro Lo Faro, and Gaetano Sciuto. "Clay-Based Products Sustainable Development: Some Applications." Sustainability 13, no. 3 (January 28, 2021): 1364. http://dx.doi.org/10.3390/su13031364.
Gökalp, Z. "Engineering characteristics of sand-clay mixtures used for clay cores of earth-fill dams." Clay Minerals 44, no. 3 (September 2009): 319–26. http://dx.doi.org/10.1180/claymin.2009.044.3.319.
Tarvornpanich, Tarnkamol, Guilherme P. Souza, and William E. Lee. "Microstructural Evolution in Clay-Based Ceramics II: Ternary and Quaternary Mixtures of Clay, Flux, and Quartz Filler." Journal of the American Ceramic Society 91, no. 7 (July 2008): 2272–80. http://dx.doi.org/10.1111/j.1551-2916.2008.02394.x.
Okay, Gonca, Phillipe Leroy, Ahmad Ghorbani, Phillipe Cosenza, Christian Camerlynck, Justo Cabrera, Nicolas Florsch, and André Revil. "Spectral induced polarization of clay-sand mixtures: Experiments and modeling." GEOPHYSICS 79, no. 6 (November 1, 2014): E353—E375. http://dx.doi.org/10.1190/geo2013-0347.1.
Nizhegorodov, A. I. "MIXING PROCESSES AND EQUIPMENT. CONSTRUCTION MIXTURES AND MIXTURES FOR MANUFACTURING CONSTRUCTION MATERIALS. LECTURE 9." Spravochnik. Inzhenernyi zhurnal, no. 296 (November 2021): 52–59. http://dx.doi.org/10.14489/hb.2021.11.pp.052-059.
Mesboua, N., K. Benyounes, S. Kennouche, Y. Ammar, A. Benmounah, and H. Kemer. "Calcinated Bentonite as Supplementary Cementitious Materials in Cement-Based Mortar." Journal of Applied Engineering Sciences 11, no. 1 (May 1, 2021): 23–32. http://dx.doi.org/10.2478/jaes-2021-0004.
Galán Arboledas, Rosendo J., Aarón Merino García, and Salvador Bueno. "Lighter Structural Clay Ceramics Manufactured with Marble Cutting Dust and Paperboard Based Packaging Waste." Key Engineering Materials 663 (September 2015): 105–14. http://dx.doi.org/10.4028/www.scientific.net/kem.663.105.
Brito, B. M. A., P. M. Bastos, A. J. A. Gama, J. M. Cartaxo, G. A. Neves, and H. C. Ferreira. "Effect of carboxymethylcellulose on the rheological and filtration properties of bentonite clay samples determined by experimental planning and statistical analysis." Cerâmica 64, no. 370 (June 2018): 254–65. http://dx.doi.org/10.1590/0366-69132018643702332.
Tarvornpanich, Tarnkamol, Guilherme P. Souza, and William E. Lee. "Microstructural Evolution in Clay-Based Ceramics I: Single Components and Binary Mixtures of Clay, Flux, and Quartz Filler." Journal of the American Ceramic Society 91, no. 7 (July 2008): 2264–71. http://dx.doi.org/10.1111/j.1551-2916.2008.02393.x.
Abuzeid, M. A., M. T. Bassuoni, and M. R. Sakr. "Effect of Polymer/Nano-Clay Coatings on the Performance of Concrete with High-Content Supplementary Cementitious Materials under Harsh Exposures." Materials 17, no. 5 (February 23, 2024): 1030. http://dx.doi.org/10.3390/ma17051030.
Húlan, Tomáš, Igor Štubňa, Ján Ondruška, and Anton Trník. "The Influence of Fly Ash on Mechanical Properties of Clay-Based Ceramics." Minerals 10, no. 10 (October 21, 2020): 930. http://dx.doi.org/10.3390/min10100930.