Добірка наукової літератури з теми "Clay 3D Printing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Clay 3D Printing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Clay 3D Printing"
Hasiuk, Franciszek, and Chris Harding. "3D Printing Mudrocks: Experiments in Validating Clay as a Build Material for 3D Printing Porous Micromodels." Petrophysics – The SPWLA Journal of Formation Evaluation and Reservoir Description 62, no. 5 (October 1, 2021): 486–99. http://dx.doi.org/10.30632/pjv62n5-2020a4.
Повний текст джерелаAbdallah, Yomna K., and Alberto T. Estévez. "3D-Printed Biodigital Clay Bricks." Biomimetics 6, no. 4 (October 7, 2021): 59. http://dx.doi.org/10.3390/biomimetics6040059.
Повний текст джерелаLeu Alexa, Rebeca, Raluca Ianchis, Diana Savu, Mihaela Temelie, Bogdan Trica, Andrada Serafim, George Mihail Vlasceanu, Elvira Alexandrescu, Silviu Preda, and Horia Iovu. "3D Printing of Alginate-Natural Clay Hydrogel-Based Nanocomposites." Gels 7, no. 4 (November 14, 2021): 211. http://dx.doi.org/10.3390/gels7040211.
Повний текст джерелаAlqenaee, Amnah Y., Ali M. Memari, and Maryam Hojati. "TRANSITION FROM TRADITIONAL COB CONSTRUCTION TO 3D PRINTING OF CLAY HOMES." Journal of Green Building 16, no. 4 (September 1, 2021): 3–28. http://dx.doi.org/10.3992/jgb.16.4.3.
Повний текст джерелаHeng Boon, Koh, Chai Teck Jung, and Song Yi Wei. "Drying Shrinkage Properties and Initial Bonding Strength of 3D Printing Mortar." IOP Conference Series: Earth and Environmental Science 1022, no. 1 (May 1, 2022): 012045. http://dx.doi.org/10.1088/1755-1315/1022/1/012045.
Повний текст джерелаSangiorgio, Valentino, Fabio Parisi, Francesco Fieni, and Nicola Parisi. "The New Boundaries of 3D-Printed Clay Bricks Design: Printability of Complex Internal Geometries." Sustainability 14, no. 2 (January 6, 2022): 598. http://dx.doi.org/10.3390/su14020598.
Повний текст джерелаCoppola, Bartolomeo, Nicola Cappetti, Luciano Di Maio, Paola Scarfato, and Loredana Incarnato. "3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties." Materials 11, no. 10 (October 11, 2018): 1947. http://dx.doi.org/10.3390/ma11101947.
Повний текст джерелаRael, Ronald, and Virginia San Fratello. "Clay Bodies: Crafting the Future with 3D Printing." Architectural Design 87, no. 6 (November 2017): 92–97. http://dx.doi.org/10.1002/ad.2243.
Повний текст джерелаDiegel, Olaf, Andrew Withell, Deon de Beer, Johan Potgieter, and Frazer Noble. "Low-Cost 3D Printing of Controlled Porosity Ceramic Parts." International Journal of Automation Technology 6, no. 5 (September 5, 2012): 618–26. http://dx.doi.org/10.20965/ijat.2012.p0618.
Повний текст джерелаChen, Yu, Shan He, Yu Zhang, Zhi Wan, Oğuzhan Çopuroğlu, and Erik Schlangen. "3D printing of calcined clay-limestone-based cementitious materials." Cement and Concrete Research 149 (November 2021): 106553. http://dx.doi.org/10.1016/j.cemconres.2021.106553.
Повний текст джерелаДисертації з теми "Clay 3D Printing"
Dover, Noam. "EMBRACING THE DIGITAL TO THE HAND MADE : Bridging digital technology with glassblowing moulds crafting methods." Thesis, Konstfack, Keramik & Glas, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:konstfack:diva-5852.
Повний текст джерелаTung, Peng-Hsiu, and 童鵬修. "Applying Robotic Fabrication for the Applications of 3D Clay Printing." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/qs5mrs.
Повний текст джерела淡江大學
建築學系碩士班
107
Clay is one of the earliest material used for human in construction, with the invention of bauxite and kiln technic further push the limit of clay to one of the indispensable material, proven by its product which is traceable from century of times. Following the pace of technology advancement, reinforce concrete largely replace the role of clay in architecture construction today, in the other hand clay processing technic has a downturn and slowly fall into disuse. In recent years three dimensional printing technic developments has allows many materials to go beyond the limit in forming process, opens up the possibility in new exploration. Due to clay’s organic, low environmental impact and sustainable characteristic has once again gain attention in three-dimensional printing in experiment and exploration. The research mainly categorized into three parts: first part would be a study of comparison on current clay printing system, identifying the best fit of system structure to be applied in further studies operating via robotic arm, which includes printing nozzle, clay compartment tubes and printing path composition, finally with actual printing test to find the best module under varies parametric adjustment. The second part tested varies printing forms carry out by robotic arm, including flat horizontal surface filling and curve surface printing; along the process, troubleshoot was taken to identify the error and limitation for improvement. Third part of the research extend the printing test in second part, further develop an actual scale structure for testing to find possible potential in applying into actual construction world. Three-dimensional printing under robotic arm applied the principle of layering formation, this could reverse the convention method of forming that require molds. The six dimensional axial movement of robotic arm provide an agile and precise set out that largely benefits the operational in curves form, making it a large stand in customization processing market needs. As the research mainly focus in clay printing system development, however the knowledge of clay material property much influence the application into the printing system, futures studies that could look deeper into the clay material itself will definitely enhance the system and bring it to the next level.
Golub, Michael. "Characterization of tensile and hardness properties and microstructure of 3D printed bronze metal clay." Thesis, 2017. https://doi.org/10.7912/C2QS8X.
Повний текст джерелаBronze is a popular metal for many important uses. Currently, there are no economical 3D printers that can print Bronze powders. A recent product, Bronze Metal Clay (BMC) has arrived. Additionally, commercial metal 3D printers require laser or electron beam sources, which are expensive and not easily accessible. The objective of this research is to develop a new two-step processing technique to produce 3D printed metallic component. The processing step includes room temperature 3D printing followed by high-temperature sintering. Since no material data exists for this clay, the tensile strength and hardness properties of BMC are compared to wrought counterpart. In this research tests are completed to determine the mechanical properties of Cu89Sn11 Bronze Metal Clay. The author of this thesis compares the physical properties of the same material in two different formats: 3D printed clay and molded clay. Using measured stress-strain curves and derived mechanical properties, including Young's modulus, yield strength, and ultimate tensile strength, the two formats demonstrate inherit differences. The Ultimate tensile strength for molded BMC and 3D-printed specimens sintered at 960 C was 161.94 MPa and 157 MPa, respectively. A 3D printed specimen which was red at 843 C had 104.32 MPa tensile strength. Factory acquired C90700 specimen had an ultimate stress of 209.29 MPa. The Young's modulus for molded BMC and 3D-printed specimens sintered at 960 C was 36.41 GPa and 37.05 GPa, respectively. The 843 C 3D-printed specimen had a modulus of 22.12 GPa. C90700 had the highest modulus of 76.81 GPa. The Yield stress values for molded BMC and 3D-printed specimens sintered at 960 C was 77.81 MPa and 72.82 MPa, respectively. The 3D-printed specimen had 46.44 MPa. C90700 specimen had 115.21 MPa. Hand molded specimens had a Rockwell hardness HRB85, while printed samples had a mean of HRB69. Also, molded samples recorded a higher Young's Modulus of 43 GPa vs. 33 GPa for the printed specimens. Both samples were weaker than the wrought Cu88:8Sn11P0:2 which had a 72 GPa. Cu88:8Sn11P0:2 also was a harder material with an HRC45. The property di erence between 3D printed, molded, and wrought samples was explained by examining their micro structures. It shows that 3D printed sample had more pores than the molded one due to printing process. This study demonstrates the flexibility and feasibility of using 3D printing to produce metallic components, without laser or electron beam source.
Campos, Tatiana Vilaça. "Exploração da utilização de pasta de papel na fabricação aditiva em arquitetura." Master's thesis, 2019. http://hdl.handle.net/1822/59881.
Повний текст джерелаConsiderando uma abordagem transformadora na indústria, as técnicas de fabrico aditivo (FA) transformaram várias áreas ao longo das últimas décadas, como a arquitetura e a engenharia, no que toca à produção de sistemas e revestimentos mais complexos. Estes fatores foram executáveis devido à constante evolução tecnológica, conseguida através da alteração do paradigma do pensamento analógico-digital. O ‘fabrico aditivo’ é um processo de transformação que advém de um desenho digital e rematasse num modelo físico, culminando a capacidade de criação de um modelo tridimensional por meio da adição do próprio material - Aditivo. Denominar este processo de ‘impressão 3D’ ou ‘prototipagem rápida’ é incorreto, uma vez que estes dois termos na realidade são duas vertentes que surgiram do FA. Cada objeto produzido para prototipagem é digitalmente definido pela utilização de softwares Computer Aided Design (CAD), onde, através da geração de um código é possível “fatiar” o objeto para a sua produção. Embora as técnicas de FA possam suscitar surpresas para alguns utilizadores, a sua existência remota à várias décadas, sofrendo assim constantes evoluções transversalmente ao desenvolvimento tecnológico. Quando aplicadas em determinados contextos oferecem elevadas vantagens, maiormente na obtenção de modelos com um elevado rigor e detalhe. A pesquisa de ‘novos’ materiais é possível, se se constatar que ao longo desta investigação, é pretendido aumentar o conhecimento, adquirido até à data, para possíveis misturas compósitas oportunas para utilização em arquitetura. Graças às tecnologias de fabrico aditivo e à integração de processos de modelação tridimensional, a celulose, efetivamente pode ser considerada uma nova possibilidade para a produção de elementos arquitetónicos quando adicionada estrategicamente com determinados materiais. O desenvolvimento de variadas misturas poderá beneficiar o campo tecnológico, mais concretamente a impressão 3D e prototipagem rápida, através da laboração de uma pasta possível de utilizar para a personalização de componentes arquitetónicos, com baixos custos de produção. O principal caso de estudo desta investigação centra-se no desenvolvimento de uma parede modular, que utiliza como base blocos hexagonais regulares. Será desenvolvida com o intuito de compilar todos os resultados obtidos com o estudo da celulose e a possibilidade de união a outros materiais. Toda a parede será engendrada através de razões paramétricas, recorrendo a programas computacionais, fazendo-se variar a geometria de cada bloco segundo parâmetros definidos.
Considering a transformative approach in the industry, additive manufacturing (AM) techniques have been transforming several areas in the past decades, such as architecture and engineering, regarding systems productions and complex coatings. These factors were executable due to the constant technological evolution, achieved through the alteration of the paradigm of analogical-digital thinking. The ‘additive manufacturing’ is a process of transformation that accrues from a digital design and comes into a physical model, culminating the ability to create a three - dimensional model through the addition of the material itself - Additive. To name this process of ‘3D printing’ or ‘rapid prototyping’ is incorrect, since these two terms are actually two strands that arose from the AM. Each object produced for prototyping is digitally defined by the use of Computer Aided Design (CAD) software, where, through the generation of a code, it is possible to “slice” the object for its production. Although the AM techniques can cause surprises for some users, their existence is remote for several decades, thus suffering constant changes across technology development. When applied in certain contexts they might offer high advantages, mainly by obtaining models with high rigor and detail. The research of ‘new’ materials is possible, has it has been verified throughout this investigation, it is intended to increase the knowledge, acquired so far, for possible composite mixtures suitable for architecture use. Thanks to the technologies of additive manufacturing and the integration of three-dimensional modeling processes, cellulose can effectively be considered as a new possibility at the production of architectural elements when added strategically with certain materials. The development of various mixes could benefit the technological field, namely 3D printing and rapid prototyping, by working with a paste that can be used for personal customization in architectural components, regarding low cost production. The main case on this research focuses on the development of a modular wall, which uses regular hexagonal blocks as base. It will be developed with the purpose of compiling all the results obtained with the study of cellulose and the possibility of union with other materials. The entire wall will be generated through parametric reasons, using computational programs, by making the geometry of each block vary according to defined parameters.
Частини книг з теми "Clay 3D Printing"
Pungercar, Vesna, Martino Hutz, and Florian Musso. "3D Print with Salt." In 3D Printing for Construction with Alternative Materials, 91–125. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-09319-7_5.
Повний текст джерелаKo, Minjae, Donghan Shin, Hyunguk Ahn, and Hyungwoo Park. "InFormed Ceramics: Multi-axis Clay 3D Printing on Freeform Molds." In Robotic Fabrication in Architecture, Art and Design 2018, 297–308. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92294-2_23.
Повний текст джерелаAbdallah, Yomna K., Secil Afsar, Alberto T. Estévez, and Oleg Popov. "Remote 3D Printing for the Integration of Clay-based Materials in Sustainable Architectural Fabrication." In Renewable Energy for Mitigating Climate Change, 133–52. New York: CRC Press, 2021. http://dx.doi.org/10.1201/9781003240129-7.
Повний текст джерелаBeigh, Mirza A. B., Venkatesh N. Nerella, Christof Schröfl, and Viktor Mechtcherine. "Studying the Rheological Behavior of Limestone Calcined Clay Cement (LC3) Mixtures in the Context of Extrusion-Based 3D-Printing." In RILEM Bookseries, 229–36. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-2806-4_26.
Повний текст джерелаWang, S., S. Dritsas, P. Morel, and K. Ho. "Clay robotics: A hybrid 3D printing casting process." In Challenges for Technology Innovation: An Agenda for the Future, 83–88. CRC Press, 2017. http://dx.doi.org/10.1201/9781315198101-16.
Повний текст джерелаТези доповідей конференцій з теми "Clay 3D Printing"
Gürsoy, Benay. "From Control to Uncertainty in 3D Printing with Clay." In eCAADe 2018: Computing for a better tomorrow. eCAADe, 2018. http://dx.doi.org/10.52842/conf.ecaade.2018.2.021.
Повний текст джерелаFarrokhsiar, Paniz, and Benay Gursoy. "Robotic Sketching: A Study on Robotic Clay 3D Printing." In Congreso SIGraDi 2020. São Paulo: Editora Blucher, 2020. http://dx.doi.org/10.5151/sigradi2020-43.
Повний текст джерелаCavaliere, Ilaria, Angelo Vito Graziano, and Dario Costantino. "STEREOTOMIC GREEN VAULT: CLAY 3D PRINTING APPLIED TO STEREOTOMY." In DARCH 2022 November - 3rd International Conference on Architecture & Design. International Organization Center of Academic Research, 2022. http://dx.doi.org/10.46529/darch.202234.
Повний текст джерелаBhardwaj, Abhinav, Negar Kalantar, Elmer Molina, Na Zou, and Zhijian Pei. "Extrusion-Based 3D Printing of Porcelain: Feasible Regions." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-3004.
Повний текст джерелаHasiuk, Franciszek, and Chris Harding. "3D PRINTING MUDROCKS: EXPERIMENTS IN VALIDATING THE 3D-PRINTING PROCESS WHEN USING KAOLINITE CLAY AS A BUILD MATERIAL." In Joint 53rd Annual South-Central/53rd North-Central/71st Rocky Mtn GSA Section Meeting - 2019. Geological Society of America, 2019. http://dx.doi.org/10.1130/abs/2019sc-326875.
Повний текст джерелаCoppola, B., N. Cappetti, L. Di Maio, P. Scarfato, and L. Incarnato. "Influence of 3D printing parameters on the properties of PLA/clay nanocomposites." In 9TH INTERNATIONAL CONFERENCE ON “TIMES OF POLYMERS AND COMPOSITES”: From Aerospace to Nanotechnology. Author(s), 2018. http://dx.doi.org/10.1063/1.5045926.
Повний текст джерелаGhosh, Avishek, and Jean-Jacques Favier. "3D Printing of Eco-Friendly Artificial Martian Clay (JMSS-1) for In-Situ Resource Utilization on Mars." In ASME 2022 17th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/msec2022-85353.
Повний текст джерелаAnwar, Chems, Abdeslam Benamara, and Abdelhak Kaci. "Flax Fibers Composite Made up by 3D Printing." In 4th International Conference on Bio-Based Building Materials. Switzerland: Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/www.scientific.net/cta.1.842.
Повний текст джерелаKontovourkis, Odysseas, and George Tryfonos. "Integrating Parametric Design with Robotic Additive Manufacturing for 3D Clay Printing: An Experimental Study." In 34th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction (IAARC), 2018. http://dx.doi.org/10.22260/isarc2018/0128.
Повний текст джерелаClaire Im, Hyeonji, Sulaiman AlOthman, and Jose Luis García del Castillo. "Responsive Spatial Print. Clay 3D printing of spatial lattices using real-time model recalibration." In ACADIA 2018: Re/Calibration: On Imprecision and Infidelity. ACADIA, 2018. http://dx.doi.org/10.52842/conf.acadia.2018.286.
Повний текст джерела