Добірка наукової літератури з теми "Catalyst warm-up"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Catalyst warm-up".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Catalyst warm-up"
Umehara, K. "HC reduction system for cold start and warm-up phases — Improvement of catalyst warm-up by retarded ignition." JSAE Review 18, no. 1 (January 1997): 67–68. http://dx.doi.org/10.1016/s0389-4304(96)00056-2.
Повний текст джерелаKhalilikhah, O., and M. Shalchian. "Modelling and Fuzzy-Threshold Control of SI Engine for Emission Reduction during Cold Start Phase." International Journal of Automotive and Mechanical Engineering 16, no. 4 (December 30, 2019): 7225–42. http://dx.doi.org/10.15282/ijame.16.4.2019.05.0539.
Повний текст джерелаBenjamin, S. F., and C. A. Roberts. "Automotive catalyst warm-up to light-off by pulsating engine exhaust." International Journal of Engine Research 5, no. 2 (April 2004): 125–47. http://dx.doi.org/10.1243/146808704773564541.
Повний текст джерелаBenjamin, S. F., and C. A. Roberts. "Warm up of automotive catalyst substrates: Comparison of measurements with predictions." International Communications in Heat and Mass Transfer 25, no. 1 (January 1998): 19–32. http://dx.doi.org/10.1016/s0735-1933(97)00134-6.
Повний текст джерелаJeong, S.-J., and W.-S. Kim. "A new strategy for improving the warm-up performance of a light-off auto-catalyst for reducing cold-start emissions." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 215, no. 11 (November 1, 2001): 1179–96. http://dx.doi.org/10.1243/0954407011528725.
Повний текст джерелаBenjamin, S. F., and C. A. Roberts. "Catalyst warm-up to light-off by pulsating engine exhaust: Two-dimensional studies." International Journal of Engine Research 5, no. 3 (June 2004): 257–80. http://dx.doi.org/10.1243/1468087041549607.
Повний текст джерелаBenjamin, S. F., and C. A. Roberts. "Modelling warm-up of an automotive catalyst substrate using the equivalent continuum approach." International Journal of Vehicle Design 22, no. 3/4 (1999): 253. http://dx.doi.org/10.1504/ijvd.1999.001868.
Повний текст джерелаJungKim, Chan, Sank Wook-Han, Ki Hyun Kim, Moo Yeon Lee, and Gee Soo Lee. "Effects of the exhaust gas heat recovery system with a plate heat exchanger on the warm-up performance characteristics of the gasoline engine." International Journal of Engineering & Technology 7, no. 2.12 (April 3, 2018): 136. http://dx.doi.org/10.14419/ijet.v7i2.12.11110.
Повний текст джерелаBenjamin, S. F., and C. A. Roberts. "Warm up of an automotive catalyst substrate by pulsating flow: a single channel modelling approach." International Journal of Heat and Fluid Flow 21, no. 6 (December 2000): 717–26. http://dx.doi.org/10.1016/s0142-727x(00)00025-4.
Повний текст джерелаMerkisz, Jerzy, Jacek Pielecha, and Monika Andrych-Zalewska. "Influence of the Length of a Catalyst-Coated Glow Plug on Exhaust Emissions." Energies 13, no. 24 (December 11, 2020): 6557. http://dx.doi.org/10.3390/en13246557.
Повний текст джерелаДисертації з теми "Catalyst warm-up"
Hambarek, Djamel Eddine. "Développement d'une méthodologie d'essais dynamiques appliquée à la mise au point moteur." Electronic Thesis or Diss., Ecole centrale de Nantes, 2023. http://www.theses.fr/2023ECDN0035.
Повний текст джерелаThe work of this thesis responds to the context of the evolution of engine depollution norms together with the increase of the clientrequirements. It proposes a complete methodology of engine calibration considering dynamic effects with the aim of an efficient control in terms of emissions and performances. The method is divided into four steps: the dynamic design of experiments generating a set of RDE (Real Driving Emissions) cycles and dynamic variations of engine parameters using low discrepancy sequences: test results are used to train a dynamical model using LSTM neural network to predict output dynamic variations(CO, HC, NOx, Exhaust flow and temperature). The trained model is used in an optimization loop to calibrate the engine parameters using a genetic algorithm. The catalyst warm-up phase is the chosen phase for the development of the method. It is the phase occuring from engine start until the catalyst is the most efficient. It is indeed the phase with the most important emissions which is coherent with the aim of the engine calibration. The results showed noticeable improvements of CO, HC and Nox reduction compared to the steady state (baseline) method
Cedeño, Alejandro. "Sintering of a Pt/Al₂O₃ automotive exhaust oxidation catalyst effect on converter "warm-up" performance /." 1989. http://catalog.hathitrust.org/api/volumes/oclc/20051839.html.
Повний текст джерелаTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 183-192).
Тези доповідей конференцій з теми "Catalyst warm-up"
Ball, Douglas J. "Distribution of Warm-Up and Underfloor Catalyst Volumes." In International Fuels & Lubricants Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1992. http://dx.doi.org/10.4271/922338.
Повний текст джерелаLepreux, Olivier, Yann Creff, and Nicolas Petit. "Warm-up strategy for a Diesel Oxidation Catalyst." In 2009 European Control Conference (ECC). IEEE, 2009. http://dx.doi.org/10.23919/ecc.2009.7074995.
Повний текст джерелаCedrone, Kevin, and Wai K. Cheng. "Using Valve Timing and Exhaust Back Pressure to Improve Catalyst Warm-Up Time." In SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2013. http://dx.doi.org/10.4271/2013-01-2656.
Повний текст джерелаBall, Douglas J. "A Warm-Up - Underfloor Converter Parametric Study: Effects of Catalyst Technology on Emission Performance." In 1996 SAE International Fall Fuels and Lubricants Meeting and Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1996. http://dx.doi.org/10.4271/961905.
Повний текст джерелаSalehi, Rasoul, and Anna G. Stefanopoulou. "Optimal Exhaust Valve Opening Control for Fast Aftertreatment Warm Up in Diesel Engines." In ASME 2018 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/dscc2018-9178.
Повний текст джерелаJeong, Soo-Jin, and Woo-Seung Kim. "Three-Dimensional Numerical Study on the Use of Warm-up Catalyst to Improve Light-Off Performance." In SAE 2000 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-0207.
Повний текст джерелаKarkanis, Anastasios N., Pantelis N. Botsaris, and Panagiotis D. Sparis. "A Catalyst Surface Control Automation System for Emission Reduction During Cold Start." In ASME 2004 Internal Combustion Engine Division Fall Technical Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/icef2004-0865.
Повний текст джерелаRavikumar, Avinash, Ankur Bhatt, Brian Gainey, and Benjamin Lawler. "GT-Suite Modeling of Thermal Barrier Coatings in a Multi-Cylinder Turbocharged DISI Engine for Catalyst Light-Off Delay Improvement." In Energy & Propulsion Conference & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2023. http://dx.doi.org/10.4271/2023-01-1602.
Повний текст джерелаSanketi, Pannag R., J. Karl Hedrick, and Tomoyuki Kaga. "A Simplified Catalytic Converter Model for Automotive Coldstart Control Applications." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80696.
Повний текст джерелаHAMBAREK, Djamel Eddine, Jean-François PETIOT, Pascal Chesse, and Eric WATEL. "Towards a Complete Engine Calibration Methodology: Dynamic Design of Experiments (DDoE), Application to Catalyst Warm-Up Phase." In 15th International Conference on Engines & Vehicles. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2021. http://dx.doi.org/10.4271/2021-24-0028.
Повний текст джерела