Добірка наукової літератури з теми "Casey Inlier"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Casey Inlier".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Casey Inlier"
Carr, Lidena, Russell Korsch, Wolfgang Preiss, Sandra Menpes, Josef Holzschuh, and Ross Costelloe. "Structural and stratigraphic architecture of Australia's frontier onshore sedimentary basins: the Arckaringa, Officer, Amadeus, and Georgina basins." APPEA Journal 51, no. 2 (2011): 703. http://dx.doi.org/10.1071/aj10083.
Повний текст джерелаHeinz, Jürgen, Wolfgang Fiori, Peter Heusser, and Thomas Ostermann. "Cost Analysis of Integrative Inpatient Treatment Based on DRG Data: The Example of Anthroposophic Medicine." Evidence-Based Complementary and Alternative Medicine 2013 (2013): 1–7. http://dx.doi.org/10.1155/2013/748932.
Повний текст джерелаErguvan, Mustafa, and David MacPhee. "Energy and Exergy Analyses of Tube Banks in Waste Heat Recovery Applications." Energies 11, no. 8 (August 12, 2018): 2094. http://dx.doi.org/10.3390/en11082094.
Повний текст джерелаWilson, Reginald A. "Geochemistry and petrogenesis of Ordovician arc-related mafic volcanic rocks in the Popelogan Inlier, northern New Brunswick." Canadian Journal of Earth Sciences 40, no. 9 (September 1, 2003): 1171–89. http://dx.doi.org/10.1139/e03-034.
Повний текст джерелаKatina, Stanislav. "Detection of non-affine shape outliers for matched-pair shape data." Tatra Mountains Mathematical Publications 51, no. 1 (November 1, 2012): 83–90. http://dx.doi.org/10.2478/v10127-012-0009-9.
Повний текст джерелаGrossi, Massimo. "On the number of critical points of solutions of semilinear elliptic equations." Electronic Research Archive 29, no. 6 (2021): 4215. http://dx.doi.org/10.3934/era.2021080.
Повний текст джерелаLi, Xiaoning, Chuanhai Wang, Gang Chen, Qiang Wang, Zunle Hu, Jinning Wu, Shan Wang, and Xing Fang. "Evaluating Efficiency Improvement of Deep-Cut Curb Inlets for Road-Bioretention Stripes." Water 12, no. 12 (November 30, 2020): 3368. http://dx.doi.org/10.3390/w12123368.
Повний текст джерелаParedes, Jorge Morales, and Félix Humberto Soriano Méndez. "On the Cauchy problems associated to a ZK-KP-type family equations with a transversal fractional dispersion." Discrete & Continuous Dynamical Systems 42, no. 5 (2022): 2257. http://dx.doi.org/10.3934/dcds.2021190.
Повний текст джерелаLampunio, Lisa, Yu Duan, Matthew D. Eaton, and Michael J. Bluck. "Mean Flow, Turbulent Structures, and SPOD Analysis of Thermal Mixing in a T-Junction with Variation of the Inlet Flow Profile." Energies 15, no. 22 (November 10, 2022): 8415. http://dx.doi.org/10.3390/en15228415.
Повний текст джерелаLi, Xiaoning, Xing Fang, Chuanhai Wang, Gang Chen, Shiwei Zheng, and Yue Yu. "Performance Analysis for Road-Bioretention with Three Types of Curb Inlet Using Numerical Model." Water 13, no. 12 (June 11, 2021): 1643. http://dx.doi.org/10.3390/w13121643.
Повний текст джерелаДисертації з теми "Casey Inlier"
Grekin, Jacqueline. "Understanding the community-level impacts of tourism development : the case of Pond Inlet, NWT." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=68096.
Повний текст джерелаThe empirical section of the thesis is based on surveys of several key actors: residents, tourists, and the tourist industry. When combined with a simplified multiplier analysis, the findings indicate that the community's current tourism strategy is largely consistent with local economic objectives and that as a result residents support tourism development. Nevertheless, the results suggest certain weaknesses in the current approach to tourism development. They include: the potential for conflicts to develop between local hunters and wildlife watchers; a failure to link tourism to other sectors of the local economy; and difficulties reaching consumers in the context of a restructured travel industry increasingly dominated by computer technology. I then proceed to provide some policy and planning recommendations. This is followed by a brief evaluation of the theoretical approach adopted. I conclude by outlining some areas for future research.
Condon, Elizabeth Darrow. "Physiological Ecology of the Cultured Hard Clam, Mercenaria mercenaria: A Case Study in Cherrystone Inlet, Virginia." W&M ScholarWorks, 2005. https://scholarworks.wm.edu/etd/1539617838.
Повний текст джерелаКарапузова, Марина Володимирівна, Марина Владимировна Карапузова та Maryna Volodymyrivna Karapuzova. "Гидродинамические особенности конструирования комбинированного подвода центробежного насоса". Thesis, Изд-во СумГУ, 2012. http://essuir.sumdu.edu.ua/handle/123456789/29796.
Повний текст джерелаВ диссертационной работе представлены результаты исследования рабочего процесса в подводящем устройстве центробежного насоса. С учетом гидродинамических особенностей рабочего процесса систематизирован подход к проектированию подводящего устройства центробежного насоса. Предложена математическая модель расчета подводящего устройства, обосновано выделение подвода в отдельный модуль при блочно-модульном проектировании. Основным содержанием работы является анализ структуры течения на участке «выход из подвода – вход в рабочее колесо», изучение влияния момента скорости потока на входе в рабочее колесо на характеристики насоса в целом. Для каждого соотношения геометрических параметров рабочего колеса существует свое значение момента скорости потока на входе в рабочее колесо, при котором создается наиболее равномерная структура потока на входе в рабочее колесо, в результате чего обеспечивается протекание рабочего процесса ЦН с оптимальным КПД. Создать требуемую структуру потока на входе в рабочее колесо предлагается путем применения подвода нового типа – комбинированного подвода. На разработанную конструкцию комбинированного подвода получен декларативный патент Украины на полезную модель. Комбинированный подвод состоит из кольцевой камеры и лопаточного направляющего аппарата. Такая конструкция подвода является технологичной и создает базу для унификации подводящих устройств центробежного насоса. Для обеспечения наиболее эффективного рабочего процесса центробежного насоса проектируется лопаточный направляющий аппарат, который и создает требуемый момент скорости потока на входе в данное рабочее колесо, оставляя при этом неизменной базовую корпусную деталь. Сегодня все чаще при эксплуатации мощных энергоемких насосов на режимах отличных от номинального применяют сменные ротора, которые обеспечивают оптимальную работу насоса на указанных режимах. При этом применяют комбинированные отводы, но не уделяется внимание вопросу создания определенных условий на входе в рабочее колесо. С помощью комбинированного подвода можно решить эту проблему, и с успехом использовать его при проектировании насосов со сменными роторами, что приведет к улучшению ряда эксплуатационных показателей. При выполнении работы применялись методы исследования: аналитический метод, численное исследование течения в подводящем устройстве центробежного насоса и физический эксперимент. Численное моделирование проводилось с использованием программного продукта ANSYS CFX 11.0 с использованием стандартной k-ε модели турбулентности. Расчет течения проводился в стационарной постановке. Рабочая жидкость была принята несжимаемой, режим течения – турбулентный. В качестве граничных условий заданы: на входе – массовый расход, на выходе – статическое давление, на всех твердых поверхностях – условие равенства скорости нулю (условие прилипания). При цитировании документа, используйте ссылку http://essuir.sumdu.edu.ua/handle/123456789/29796
Candidate Paper performs research results of operating process at centrifugal pump suction chamber. Centrifugal pump suction chamber designing has been systematized due to the hydro-mechanical features of operating process. Mathematical (designing) model of suction chamber has been proposed, suction chamber separationas a separate module has been approved for bloke-module designing. The basic content of the Paper is flow structure analyze at the area “outlet of the suction chamber–impeller inlet” and studying influence of the flow velocity moment at impeller inlet on the pump characteristics. Suction chamber of a new type has been developed – combined suction chamber, which allows creating predictable flow structure at impeller inlet. Developed design of the combined suction chamber is protected and confirmed with Declarative Patent of Ukraine for the “Useful Model”. To ensure the most effective impeller operating process we should design vane diffuser, which would create required flow velocity torque at impeller inlets. Designing procedure for suction case of combined type has been developed. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/29796
Thomas, C. M. "Zircon Lu-Hf constraints on recently proposed models for the tectonic assembly of Proterozoic central Australia." Thesis, 2012. http://hdl.handle.net/2440/95490.
Повний текст джерелаThe Arunta region, central Australia, is interpreted to record evidence for the complex evolution and growth of the Australian continent during the Paleoproterozoic and Mesoproterozoic. The Warumpi Province, in the southern Arunta region, has been proposed to be an exotic terrain that has accreted to the more northerly Aileron Province in the North Australian Craton during the ca1640 Ma Liebig Orogeny. The Casey Inlier has been identified to contain the boundary between the Aileron and Warumpi Provinces. U-Pb dating indicates ages of ca1652-1670 Ma granites to be the Warumpi Province and the ca1756-1774 Ma granites to be the Aileron Province. New Lu-Hf zircon analysis undertaken in this study revealed that the source regions of both provinces are isotopically indistinguishable. U-Pb and Lu-Hf analysis of detrital zircon in a quartzite cover sequence provides a maximum depositional age of ca1311 Ma and an isotopic signature that is characteristic of the Musgrave Province. This suggests that the Arunta region was proximal at this time. Field observations indicate a pervasive NNW-SSE strike fabric with east side up shear dated at ca 1730 Ma age, with a later west side up shear fabric attributed to be ca 1140 Ma shear fabric. The data obtained in this study combined within previous evidence for shared histories indicate the Warumpi Province was not exotic to the Aileron Province and it is most unlikely that a suturing event occurred at ca 1640 Ma.
Thesis (B.Sc.(Hons)) -- University of Adelaide, School of Earth and Environmental Sciences, 2012
Concejo, Ana Vila. "Sediment dynamics and tidal inlet relocation in mixed-energy settings: the case of Ancão inlet (Algarve - Portugal)." Doctoral thesis, 2003. http://hdl.handle.net/10400.1/1931.
Повний текст джерелаThe main aim of this thesis is to study the sedimentary dynamics of mixed energy tidal inlets on different time scales (from hours to decades) as well as to analyse inlet relocation as a coastal management tool. The field studies were carried out in the Ria Formosa, a multi-inlet barrier island system located in southern Portugal. Long Term Studies: The four natural inlets of the Ria Formosa were studied for the period between the 1940’s and 1996. Inlet width and position of the inlet channel were determined using a series of vertical aerial photos and charts. The objective was to determine the association between inlet migration patterns and different hydrodynamic conditions, major storms and engineering interventions. Results indicate that natural inlet opening and evolution were mainly affected by three factors: (a) the existence of sub-embayments (western and eastern) inside the system, (b) exposure to wave energy, and (c) inlet efficiency. Two distinctive eastward migration patterns were found by analysing the correlation coefficient (r) between inlet width evolution and inlet migration and by the comparison of the shape of the curves fitted to the inlet migration behaviour. Typical migration of the high-energy flank is characterised by an initial stage of readjustment, with low migration rates, followed by a stage of high eastward migration rates, up to a limiting position. Inlet width remains reasonably constant during the entire migration cycle, thus the correlation between inlet width and position is very low. Typical inlets on the low-energy flank are formed by barrier breaching during major storms and produce, initially, very wide inlets. Eastward inlet migration on the low-energy flank follows a natural logarithmic curve where channel migration is accompanied by strong constructional processes on the updrift barrier. Due to subsequent inlet width reductions, the correlation between inlet width and position is significant. Medium Term Studies: A monitoring program, including the acquisition of a series of topo-bathymetric surveys and oblique aerial photos, has been carried out at Anc˜ao Inlet since its artificial opening in June 1997. The results (morphologic and volumetric) were analysed with relation to the prevailing oceanographic conditions. This allowed the development of a conceptual evolutionary model for the natural evolution of artificially opened inlets with 4 stages: Stage 1 is the artificially opened inlet; Stage 2 represents the inlet after reaching dynamic equilibrium for the channel and while it is developing the deltas; Stage 3 is the mature migrating inlet; and Stage PS (Post-Storm) is the inlet situation after high-energy conditions. Transition between stages 1 to 3 is a continuous process with intermediate sub-stages. Transition to Stage PS is a discrete phenomenon, caused by high-energy events, after which the inlet continuously changes back to the previous stage. Short Term Studies: Three sediment transport studies using tracers were performed at Anc˜ao Inlet. The objectives of the experiments were to determine and understand the sediment transport pathways and magnitudes on the updrift margin of an inlet. In order to apply the traditionally used Space Integration Methodology to the tracer experiments, some adaptations had to be made. The division of the study area into morphologically defined sectors was found to be a key factor for the applicability of tracers in such a complex area. Therefore, 4 sectors were defined: Sector A representing the straight part of the updrift beach; Sector B being the upper area of the swash platform; Sector C being the lower area of the swash platform; and Sector D representing the inner parts of the inlet margin. The integrated study of all data (wind, waves, currents, tracer distribution and topographic evolution) led to the determination of the sediment pathways. Three tidal stages (TS), associated with distinctive sediment transport patterns, were found to occur at the inlet margin during each tidal cycle: TS1 implies flooding currents, and thus, transport towards the inside of the inlet area, both on the swash platform and the inner parts of the inlet area; during TS2 flooding currents transporting sediments towards the inlet occur on the swash platform whilst the interaction of the flooding currents with the flood delta produces the development of an anticlockwise internal gyre (IG) that results in ebbing currents occurring in the inner inlet margin; TS3 implies ebbing transport both in the inner margin and the swash platform. Evidence of the existence of a clockwise external gyre (EG) on the swash platform was found. A semi-quantitative conceptual model was developed in order to explain the sediment transport pathways and magnitudes that a known mass of sediment would follow after arriving at the swash platform. It was found that the areas with the largest sediment accumulation were Sector B and C, whilst almost no sediment was retained in Sector D which underwent strong erosive processes. According to the model only 48% of the initial mass of sediments are still in the system after two tidal cycles. It is hypothesised that sediment losses are due to sediment transport towards the ebb delta and to sediment by-passing occurring from the ebb delta to the downdrift beach through swash bar processes. The herein defined conceptual model represents a useful tool that could be applied to other tidal inlets under similar conditions, facilitating sediment budget studies around tidal inlets. Inlet Relocation Assessment: Two inlets were relocated in the Ria Formosa and were the subject of a monitoring program that included the acquisition of quantitative (topo-bathymetric surveys) data. The data obtained from the monitoring program were analysed together with the wave climate and then compared with historical information on the natural inlets, in order to assess the degree of success of the relocation actions. One of the relocations studied, Anc˜ao Inlet, was considered to be successful even though an initial unexpected behaviour produced some material damage to property. On the contrary, the relocation of Fuzeta Inlet, did not have the expected results and the new inlet was effected by the same problems as the old one. It was found that the most important factor for a relocation action to succeed is the correct choice of the location of the opening. A theoretical procedure to enhance the possibilities of relocation success is suggested: (1) Hydrodynamic studies are needed in order to determine if the present conditions are similar to the historical ones. (2) The position for the inlet opening is chosen according to the hydrodynamic conditions but there are other factors to be taken into account, i.e., the historical migration paths and typical inlet width of the natural inlet; the hydrodynamics of the backbarrier; the morphology of the backbarrier and, for multi-inlet barrier island systems, the proximity to adjacent inlets. (3) Once the position is chosen, environmental impact studies should be made in order to assess the risk of the relocation for the ecosystems of the area. Only if the environmental impact studies are favourable, should a relocation action be performed.
European Marine Sicience and Technology Program
Fundação para a Ciência e Tecnologia
Song, Gang, and 宋崗. "DESIGN ANALYSIS OF AN IRR CASE WITH ELLIPTIC AIR-INLET PORTS." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/85637516178967393785.
Повний текст джерела淡江大學
機械工程研究所
81
This paper is concerned with the stress concentration problem of the integral rocket ramjet (IRR) with four ellipticair-inlet ports. The problem can be simplified by the analysisof the stress distribution around the holes in a cylindricalpressure vessel with elliptic cutouts. In this paper, the problems are solved by the FiniteElement Method. First, we use the four nodes bilinear plane-stress ele- ment to solve the plane-stress problem considering a cylindrical vessel with infinite radius. Next, we use fournodes bilinear shell element to analyze the stress condition of the cylindrical vessel with one elliptic cutout, and compare the solution with Sanders solutions based on the perturbation method. Finally, we analyze the stress condition around the holes of an IRR case with four elliptic cutouts. In this study, the results of stress analysis can be pro- vided an useful guide to design the IRR case with reinforcement and sealing protection near the inletports.
Amado, Pedro Miguel de Sousa Vinagre. "Salt marsh response to changing hydrodynamics: the case of Ancão Inlet migration (Ria Formosa coastal lagoon)." Master's thesis, 2019. http://hdl.handle.net/10400.1/13895.
Повний текст джерелаTendo em conta a economia e ecologia dos sapais de maré, é de extrema importância melhorar os conhecimentos sobre os processos físicos envolvidos na sua evolução, bem como o conhecimento acerca dos seus limites físicos e interações existentes com as fontes sedimentares presentes no sistema. A área de estudo deste trabalho localiza se em frente a uma barra de maré, Barra do Ancão, localizada no sector oeste do sistema de ilhas barreira Ria Formosa, Portugal. Foi utilizada uma serie temporal de 67 anos de fotografias aéreas e ortofotomapas, entre 1947 e 2014, para inferir a evolução sedimentar do sapal (progressão ou regressão) em relação à migração natural da barra do Ancão e à sua relocação em 1997. Os seguintes ambientes foram mapeados: sapal de maré, planície de maré, bancos arenosos nos canais e delta de enchente da barra. A análise de resultados incluiu a análise da variabilidade horizontal destes ambientes ao longo do tempo. No geral observou-se um crescimento na área do sapal ao longo do tempo, influenciado pela migração da barra. Os diferentes estágios de migração da barra, e consequente proximidade à barra, são fatores limitantes para o crescimento do sapal em estudo. Verificou se que os bancos arenosos no canal e o delta de enchente da barra são as principais sumidores sedimentares para o crescimento da planície de maré. A contribuição da barra para o crescimento da planície de maré é mais significativa quando a barra começa a aproximar-se da sua fase de encerramento. Este aumento na planície de mare, por sua vez, leva ao aumento da área de sapal.
Would also like to acknowledge the providing of the aerial photographs obtained from the framework of the EVREST project (PTDC/MAR-EST/1031/2014), funded by FCT (Fundação para a Ciência e a Tecnologia).
Skala, Aurora Anne. "Heiltsuk and Wuikinuxv rock art: applying DStretch to reveal a layered landscape, a case study on the Central Coast, British Columbia, Canada." Thesis, 2015. http://hdl.handle.net/1828/6455.
Повний текст джерелаGraduate
0324
Книги з теми "Casey Inlier"
Allen-Chabot, Amy M., Suzanne Curtis, and Alma Blake. Inlet Isles: A Hospital Foodservice Case Study. Prentice Hall, 2002.
Знайти повний текст джерелаInlet Isles: A Hospital Foodservice Case Study. Prentice Hall, 2002.
Знайти повний текст джерелаW, Stewart Emil, Toney Michael L, Pacific Environmental Services, and United States. Environmental Protection Agency. Office of Air Quality Planning and Standards, eds. Manual and continuous emissions testing, kiln no. 1 scrubber inlet and stack, National Lime & Stone Company, Carey, Ohio. Research Triangle Park, NC: U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards, 2000.
Знайти повний текст джерелаManual and continuous emissions testing, kiln no. 1 scrubber inlet and stack, National Lime & Stone Company, Carey, Ohio: Final report. Research Triangle Park, NC: U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards, 2000.
Знайти повний текст джерелаRez, Peter. Electrical Power Generation: Fossil Fuels. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198802297.003.0004.
Повний текст джерелаЧастини книг з теми "Casey Inlier"
Rohani, Atooshe. "Inlet Ventricular Septal Defect (VSD)." In Clinical Cases in Cardiology, 197–200. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-16618-2_48.
Повний текст джерелаThanh Tung, Tran, Nguyen Quang Chien, and Do Xuan Tinh. "Sand-Spit Evolution and Inlet Dynamics Derived from Satellite Images: A Case Study for Tien Chau Inlet, Vietnam." In Lecture Notes in Civil Engineering, 287–93. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0053-1_36.
Повний текст джерелаNgouani, M. M. Siewe, Yong Kang Chen, R. Day, and O. David-West. "Low-Speed Aerodynamic Analysis Using Four Different Turbulent Models of Solver of a Wind Turbine Shroud." In Springer Proceedings in Energy, 149–54. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-63916-7_19.
Повний текст джерелаDo, Anh T. K., Vasiliki E. Kralli, Sierd De Vries, Viet T. Nguyen, and Marcel J. F. Stive. "Morphodynamics of a Seasonal Inlet: A Case Study Using Remote Sensing and Numerical Modelling for Cua Dai Inlet, Central Vietnam." In APAC 2019, 417–25. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0291-0_58.
Повний текст джерелаLeonhard, Martin. "Case Study Gallus Labelfire 340: Guiding Question to Choose a Hybrid Inline Label Converting System." In Handbook of Industrial Inkjet Printing, 731–36. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2017. http://dx.doi.org/10.1002/9783527687169.ch42.
Повний текст джерелаGonzález-Gorbeña, Eduardo, André Pacheco, Theocharis A. Plomaritis, Óscar Ferreira, Cláudia Sequeira, and Theo Moura. "Surrogate-Based Optimization of Tidal Turbine Arrays: A Case Study for the Faro-Olhão Inlet." In Lecture Notes in Computer Science, 548–61. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22744-9_43.
Повний текст джерелаLee, Christine U., and James F. Glockner. "Case 13.11." In Mayo Clinic Body MRI Case Review, edited by Christine U. Lee and James F. Glockner, 634–35. Oxford University Press, 2014. http://dx.doi.org/10.1093/med/9780199915705.003.0335.
Повний текст джерелаSonsuz, Abdullah, and Oguz Kagan Bakkaloglu. "Biomarkers in Liver Disease." In Biomarkers in Medicine, 490–521. BENTHAM SCIENCE PUBLISHERS, 2022. http://dx.doi.org/10.2174/9789815040463122010020.
Повний текст джерелаMassaro, Alessandro, Nicola Contuzzi, and Angelo Galiano. "Intelligent Processes in Automated Production Involving Industry 4.0 Technologies and Artificial Intelligence." In Research Anthology on Cross-Industry Challenges of Industry 4.0, 634–55. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-8548-1.ch033.
Повний текст джерелаMassaro, Alessandro, Nicola Contuzzi, and Angelo Galiano. "Intelligent Processes in Automated Production Involving Industry 4.0 Technologies and Artificial Intelligence." In Advanced Robotics and Intelligent Automation in Manufacturing, 97–122. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-1382-8.ch004.
Повний текст джерелаТези доповідей конференцій з теми "Casey Inlier"
Ashouri, Amir H., Mostafa Elhoushi, Yuzhe Hua, Xiang Wang, Muhammad Asif Manzoor, Bryan Chan, and Yaoqing Gao. "Work-in-Progress: MLGOPerf: An ML Guided Inliner to Optimize Performance." In 2022 International Conference on Compilers, Architecture, and Synthesis for Embedded Systems (CASES). IEEE, 2022. http://dx.doi.org/10.1109/cases55004.2022.00008.
Повний текст джерелаCox, Christopher, Chunlei Liang, and Michael Plesniak. "Spectral Difference Solution of Incompressible Flow Over an Inline Tube Bundle With Oscillating Cylinder." In ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78122.
Повний текст джерелаZhang, D. J., Q. W. Wang, M. Zeng, L. Q. Luo, F. Wu, and Z. P. Feng. "CFD Optimization of Gas Inlet Configuration for 100kW Microturbine Recuperator." In ASME Turbo Expo 2006: Power for Land, Sea, and Air. ASMEDC, 2006. http://dx.doi.org/10.1115/gt2006-90256.
Повний текст джерелаKong, Yuting, and Dong Ni. "A practical yield prediction approach using inline defect metrology data for system-on-chip integrated circuits." In 2017 13th IEEE Conference on Automation Science and Engineering (CASE 2017). IEEE, 2017. http://dx.doi.org/10.1109/coase.2017.8256193.
Повний текст джерелаBen-Asher, Yosi, Nidal Faour, and Ofer Shinaar. "Mutual Inlining: An Inlining Algorithm to Reduce the Executable Size." In 11th International Conference on Embedded Systems and Applications (EMSA 2022). Academy and Industry Research Collaboration Center (AIRCC), 2022. http://dx.doi.org/10.5121/csit.2022.120601.
Повний текст джерелаKiptoo, Dennis K., Nina Stark, Ali Albatal, and Cagdas Bilici. "Uppermost Subaqueous Soil Variability in Front of the Situk River Inlet, Alaska, from Portable Free Fall Penetrometer." In Eighth International Conference on Case Histories in Geotechnical Engineering. Reston, VA: American Society of Civil Engineers, 2019. http://dx.doi.org/10.1061/9780784482131.008.
Повний текст джерелаPIERRO, THOMAS, MORJANA SIGNORIN, and JOAO DOBROCHINSKI. "INLET MANAGEMENT STRATEGIES WITH CASE STUDIES FROM FLORIDA." In International Conference on Coastal Sediments 2019. WORLD SCIENTIFIC, 2019. http://dx.doi.org/10.1142/9789811204487_0173.
Повний текст джерелаYan, Jiandong, Tianyu Pan, Wenqian Wu, and Qiushi Li. "Experimental Investigation Of Circumferential Inlet Distortion On Partial Surge Type Stall Inception In A Transonic Axial Compressor." In GPPS Xi'an21. GPPS, 2022. http://dx.doi.org/10.33737/gpps21-tc-287.
Повний текст джерелаLee, Hyungyu, Jungsoo Lee, Sangwook Kim, Jinsoo Cho, and Donghwa Kim. "Pre-Swirl System Design Including Inlet Duct Shape by Using CFD Analysis." In ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/gt2018-76323.
Повний текст джерелаAmes, Forrest E., Pierre A. Barbot, and Chao Wang. "Effects of Aeroderivative Combustor Turbulence on Endwall Heat Transfer Distributions Acquired in a Linear Vane Cascade." In ASME Turbo Expo 2002: Power for Land, Sea, and Air. ASMEDC, 2002. http://dx.doi.org/10.1115/gt2002-30525.
Повний текст джерелаЗвіти організацій з теми "Casey Inlier"
Beck, Tanya, and Ping Wang. Morphodynamics of barrier-inlet systems in the context of regional sediment management, with case studies from West-Central Florida, USA. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/41984.
Повний текст джерелаFoti, D. J., H. W. Randolph, G. T. Geiger, D. T. Verebelyi, and L. A. Wooten. Four foot septifoil cooling experiment unrestricted inlet/outlet case. Office of Scientific and Technical Information (OSTI), February 1992. http://dx.doi.org/10.2172/10176381.
Повний текст джерелаHamm, L. L. APT Blanket System Loss-of-Coolant Accident Based on Initial Conceptual Design - Case 5: External RHR Break Near Inlet Header. Office of Scientific and Technical Information (OSTI), October 1998. http://dx.doi.org/10.2172/4890.
Повний текст джерелаHamm, L. L. APT Blanket System Loss-of-Coolant Accident (LOCA) Based on Initial Conceptual Design - Case 1: External HR Break Near Inlet Header. Office of Scientific and Technical Information (OSTI), October 1998. http://dx.doi.org/10.2172/4916.
Повний текст джерелаHamm, L. L. APT Blanket System Loss-of-Coolant Accident (LOCA) Based on Initial Conceptual Design - Case 4: External Pressurizer Surge Line Break Near Inlet Header. Office of Scientific and Technical Information (OSTI), October 1998. http://dx.doi.org/10.2172/4914.
Повний текст джерела