Статті в журналах: "Carbon tape"

1

Newport, Dave. "Editorial: Carbon Neutrality and Athletic Tape." Sustainability: The Journal of Record 2, no. 4 (August 2009): 193. http://dx.doi.org/10.1089/sus.2009.9862.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Lyu, Xiuqi, Jun Takahashi, Yi Wan, and Isamu Ohsawa. "Determination of transverse flexural and shear moduli of chopped carbon fiber tape-reinforced thermoplastic by vibration." Journal of Composite Materials 52, no. 3 (April 28, 2017): 395–404. http://dx.doi.org/10.1177/0021998317707815.

Повний текст джерела

Анотація:

Chopped carbon fiber tape-reinforced thermoplastic material is specifically developed for the high-volume production of lightweight automobiles. With excellent design processability and flexibility, the carbon fiber tape-reinforced thermoplastic material is manufactured by compressing large amounts of randomly oriented, pre-impregnated unidirectional tapes in a plane. Therefore, the carbon fiber tape-reinforced thermoplastic material presents transversely isotropic properties. Transverse shear effect along the thickness direction of carbon fiber tape-reinforced thermoplastic beam has a distinct influence on its flexural deformation. Accordingly, the Timoshenko beam theory combined with vibration frequencies was proposed to determine the set of transverse flexural and shear moduli. Meanwhile, the transverse flexural and shear moduli of carbon fiber tape-reinforced thermoplastic beam were finally determined by fitting all the first seven measured and calculated eigenfrequencies with the least squares criterion. In addition, the suggested thickness to length ratio for the 3-point bending test and Euler–Bernoulli model was given.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Rimmel, Oliver, David May, Christian Goergen, Artur Poeppel, and Peter Mitschang. "Development and validation of recycled carbon fiber-based binder tapes for automated tape laying processes." Journal of Composite Materials 53, no. 23 (December 24, 2018): 3257–68. http://dx.doi.org/10.1177/0021998318820422.

Повний текст джерела

Анотація:

The current growth in use of fiber reinforced polymer composites causes a strongly increasing amount of waste. Current approaches for fiber reinforced polymer composites recycling usually not exploit the potential of endless fibers as they are shortened during recycling and will not be properly aligned in the final product. Considering this, the present work aimed at the development of a recycling process for long recycled carbon fibers, where fiber length is preserved and load-related fiber orientation is possible. The starting point for the presented work was so-called slivers, which are long bundles of fibers resulting from a carding process that has been applied to fiber scrap. The main focus of this work was on the development of a binder mesh application rig that processes the sliver to a binder tape, processable in an automated tape laying process, which in turn required modifications to adapt to the novel tape. The functionality of the binder tape manufacturing process was validated with long recycled carbon fibers slivers with linear density of 4 g/m and fiber lengths between 70 and 120 mm. With the binder tape preform manufactured this way, two alternative routes for composite manufacturing were tested. First, the amount of binder was set so high that direct thermoplastic pressing of the preforms was possible. Second, the amount of binder was minimized, and the preforms were infiltrated with a thermoset resin system via resin transfer molding. While the thermoplastic route showed very deficient fiber–matrix adhesion, with the thermoset route, ≈68% of stiffness and ≈31% of strength of virgin fiber-based composites could be achieved in fiber direction in a unidirectional lay-up.

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Rubio-Marcos, F., M. Chicharro, E. Bermejo, M. Moreno, A. Zapardiel, and M. Villegas. "Electrodos de carbono autosoportados obtenidos por colado en cinta." Boletín de la Sociedad Española de Cerámica y Vidrio 45, no. 3 (June 30, 2006): 207–11. http://dx.doi.org/10.3989/cyv.2006.v45.i3.307.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Tanabe, Daiki, Naoki NAKATA, and Kazuaki NISHIYABU. "Auto Tape Layup of Carbon Fiber Reinforced Thermoplastic Prepreg Tape using Near Infrared Heating." Proceedings of Mechanical Engineering Congress, Japan 2017 (2017): J0440304. http://dx.doi.org/10.1299/jsmemecj.2017.j0440304.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Akonda, MH, M. Stefanova, P. Potluri, and DU Shah. "Mechanical properties of recycled carbon fibre/polyester thermoplastic tape composites." Journal of Composite Materials 51, no. 18 (October 6, 2016): 2655–63. http://dx.doi.org/10.1177/0021998316672091.

Повний текст джерела

Анотація:

The increasing use of high-value carbon fibre in composites is linked with increasing waste generation: from dry fibre and prepreg offcuts during manufacturing to end-of-life parts. In this work, a novel thermoplastic tape was produced from 60 wt.% manufacturing waste carbon fibres (60 mm long) and 40 wt.% polyester fibres using a thermal consolidation technique. The thin (0.2 mm) and narrow (20 mm wide) tapes were then used to fabricate laminated composite panels in two 0/90 tape architectures: cross-ply and woven ply. Various mechanical properties, including tensile, flexural, compression and impact were evaluated. It was found that cross-ply performed better than woven ply laminates, with failure in the latter materials typically initiating at the tape interlacement points.

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Nakada, Masayuki, Yasushi Miyano, Yoko Morisawa, Takeharu Isaki, Taiki Hirano, and Kiyoshi Uzawa. "Statistical life prediction of unidirectional carbon fiber/polypropylene tape under creep tension load." Journal of Reinforced Plastics and Composites 39, no. 7-8 (January 16, 2020): 278–84. http://dx.doi.org/10.1177/0731684419900319.

Повний текст джерела

Анотація:

Recently, a carbon fiber/polypropylene unidirectional sheet has been developed by Mitsui Chemicals, Inc. from a new polyolefin-based sizing agent for carbon fiber. Its effective polypropylene modification brings good compatibility with polypropylene to improve the fiber matrix adhesion. This study examines the prediction of the statistical lifetime of this developed carbon fiber/polypropylene unidirectional sheet under creep tension loading. First, a tensile test method for static and creep strengths at elevated temperatures was developed for carbon fiber/polypropylene unidirectional tape cut from a carbon fiber/polypropylene unidirectional sheet. Second, the static tensile strengths of carbon fiber/polypropylene tape were measured statistically at various constant temperatures under a constant strain rate. The statistical creep failure times under tension loading for carbon fiber/polypropylene tape were predicted at a constant temperature by substituting the statistical static strengths into the formulation based on the matrix resin viscoelasticity. Third, the validity of the predicted results was clarified by comparison with the creep failure times measured statistically using creep tests for carbon fiber/polypropylene tape. Finally, the relation between the failure probability and creep failure times for carbon fiber/polypropylene unidirectional tape at various loads and temperature conditions was discussed.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

OHCHI, Yukikazu, Kenji KUKWAHARA, and Mikio MURAI. "Lubricant of ME Tape with Carbon Protective Layer." Journal of the Magnetics Society of Japan 21, S_2_PMRC_97_2 (1997): S2_99–102. http://dx.doi.org/10.3379/jmsjmag.21.s2_99.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

NAKANO, Nobuo, Ken SUGATA, Kunio NAGASHIMA, and Minori KAMAYA. "Development of a monitoring tape for carbon monoxide." Bunseki kagaku 43, no. 2 (1994): 177–80. http://dx.doi.org/10.2116/bunsekikagaku.43.177.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Mochida, Isao, Seong-ho Yoon, and Yozo Korai. "Preparation of Mesophase Pitch-Based Thin Carbon Tape." Chemistry Letters 21, no. 7 (July 1992): 1111–14. http://dx.doi.org/10.1246/cl.1992.1111.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Deng, H., R. Zhang, E. Bilotti, J. Loos, and T. Peijs. "Conductive polymer tape containing highly oriented carbon nanofillers." Journal of Applied Polymer Science 113, no. 2 (July 15, 2009): 742–51. http://dx.doi.org/10.1002/app.29624.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Nelyub, V. A., S. Yu Fedorov, and G. V. Malysheva. "Investigation of structure and properties of elemental carbon fibers with metal coating." Materials Science, no. 1 (January 2021): 7–11. http://dx.doi.org/10.31044/1684-579x-2021-0-1-7-11.

Повний текст джерела

Анотація:

Four types of metal coatings made of stainless steel, silver, titanium and copper were deposited on the surface of unidirectional carbon tape by the magnetron sputtering technology. The experimental evaluation results of strength of elemental carbon fibers with the metal coatings and strength of carbon-filled plastics based on them during the interlaminar displacement are presented. When producing the carbon-filled plastics an epoxy binder and the vacuum infusion technology were used. It has been found out that all the used metal coatings lead to an increase in strength of the carbon-filled plastics during the interlaminar displacement. The carbon tape with the stainless steel coating has the highest strength increase (by 50%). However, during long-term storage, the coating effectiveness of the metalized carbon tapes decreases.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Reichert, Olaf, Larisa Ausheyks, Stephan Baz, Joerg Hehl, and Götz T. Gresser. "Innovative rC Staple Fiber Tapes - New Potentials for CF Recyclates in CFRP through Highly Oriented Carbon Staple Fiber Structures." Key Engineering Materials 809 (June 2019): 509–14. http://dx.doi.org/10.4028/www.scientific.net/kem.809.509.

Повний текст джерела

Анотація:

Increasing waste streams of carbon fibers (CF) and carbon fiber reinforced plastics (CFRP) lead to increasing need for recycling and to growing amounts of recycled carbon fibers. A main issue in current research for carbon fiber recycling is the reuse of regained fibers. Carbon staple fibers such as recycled fibers hold big potential for mechanical properties of lightweight parts, if used properly. Applying recycled CF (rCF) as milled reinforcement fibers or as nonwoven in carbon fiber reinforced plastic leads to a poor yield of mechanical proper due to low fiber orientation, limitations in fiber volume content or due to short fiber length. The rC staple fiber tape presents a more efficient approach. Recycled carbon fibers are blended with 50 wt. % thermoplastic nylon 6 fibers and processed through a roller card to a sliver, which is a linear fibrous intermediate. The sliver is continuously drawn, formed, heated and consolidated to the thermoplastic rC staple fiber tape. The tape is similar to common carbon fiber tapes or to continuous tows but has different positive properties, such as high fiber orientation, homogeneous blend of fiber and matrix and suitability for deep drawing.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Prakash, Chander, Alokesh Pramanik, Animesh K. Basak, Yu Dong, Sujan Debnath, Subramaniam Shankar, Sunpreet Singh, Linda Yongling Wu, and Hongyu Y. Zheng. "Investigating the Efficacy of Adhesive Tape for Drilling Carbon Fibre Reinforced Polymers." Materials 14, no. 7 (March 30, 2021): 1699. http://dx.doi.org/10.3390/ma14071699.

Повний текст джерела

Анотація:

In the present research work, an effort has been made to explore the potential of using the adhesive tapes while drilling CFRPs. The input parameters, such as drill bit diameter, point angle, Scotch tape layers, spindle speed, and feed rate have been studied in response to thrust force, torque, circularity, diameter error, surface roughness, and delamination occurring during drilling. It has been found that the increase in point angle increased the delamination, while increase in Scotch tape layers reduced delamination. The surface roughness decreased with the increase in drill diameter and point angle, while it increased with the speed, feed rate, and tape layer. The best low roughness was obtained at 6 mm diameter, 130° point angle, 0.11 mm/rev feed rate, and 2250 rpm speed at three layers of Scotch tape. The circularity error initially increased with drill bit diameter and point angle, but then decreased sharply with further increase in the drill bit diameter. Further, the circularity error has non-linear behavior with the speed, feed rate, and tape layer. Low circularity error has been obtained at 4 mm diameter, 118° point angle, 0.1 mm/rev feed rate, and 2500 RPM speed at three layers of Scotch tape. The low diameter error has been obtained at 6 mm diameter, 130° point angle, 0.12 mm/rev feed rate, and 2500 rpm speed at three layer Scotch tape. From the optical micro-graphs of drilled holes, it has been found that the point angle is one of the most effective process parameters that significantly affects the delamination mechanism, followed by Scotch tape layers as compared to other parameters such as drill bit diameter, spindle speed, and feed rate.

Стилі APA, Harvard, Vancouver, ISO та ін.

15

S. Tucker, Dennis, Xin Wang, Kelly Stano, Philip D. Bradford, Mike Allen, Mohan Sanghadasa, and Yuntian Zhu. "Robust Aligned Carbon Nanotube Tape with Excellent Piezoelectric Properties." Recent Progress in Space Technology (Formerly: Recent Patents on Space Technology) 4, no. 2 (May 13, 2015): 110–18. http://dx.doi.org/10.2174/2210687105666150415231906.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Yang, Ting, Zhaohui Joey Yang, Mithun Singla, Gangbing Song, and Qiang Li. "Experimental Study on Carbon Fiber Tape–Based Deicing Technology." Journal of Cold Regions Engineering 26, no. 2 (June 2012): 55–70. http://dx.doi.org/10.1061/(asce)cr.1943-5495.0000038.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Spiridonova, S. I., Yu N. Mel'nikov, L. S. Petrina, and A. Ya Batuev. "Recycling of used lubricants in a carbon-tape shop." Metallurgist 31, no. 3 (March 1987): 65–66. http://dx.doi.org/10.1007/bf00748480.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Wood, D. C., G. J. Appleby-Thomas, P. J. Hazell, and N. R. Barnes. "Shock propagation in a tape wrapped carbon fibre composite." Composites Part A: Applied Science and Manufacturing 43, no. 9 (September 2012): 1555–60. http://dx.doi.org/10.1016/j.compositesa.2012.04.013.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Bartůněk, Vilém, Ladislav Varadzin, and Jan Zavřel. "Carbon tape microsampling for non-destructive analyses of artefacts." Archaeological and Anthropological Sciences 10, no. 8 (June 8, 2017): 2173–77. http://dx.doi.org/10.1007/s12520-017-0512-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Wan, Yi, Hirofumi Suganuma, and Jun Takahashi. "Effects of fabrication processes and tape thickness on tensile properties of chopped carbon fiber tape reinforced thermoplastics." Composites Communications 22 (December 2020): 100434. http://dx.doi.org/10.1016/j.coco.2020.100434.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Neluyb, Vladimir A., Galina V. Malysheva, and Ivan A. Komarov. "New Technologies for Producing Multifunctional Reinforced Carbon Plastics." Materials Science Forum 1037 (July 6, 2021): 196–202. http://dx.doi.org/10.4028/www.scientific.net/msf.1037.196.

Повний текст джерела

Анотація:

In this article we investigated properties of elementary carbon fibers after their activation and subsequent deposition of thin layers of metal coatings on their surface. For deposition we used copper, titanium and stainless steel. We investigated influence of various technologies of preliminary processing of the fiber surface on the value of the adhesion strength of the metal coating to the carbon tape and on the mechanical properties of elementary fibers. We established that the strength of carbon plastics at interlayer shear increases by 10-30% when using carbon tapes and fabrics with a metal coating.

Стилі APA, Harvard, Vancouver, ISO та ін.

22

SHINOHARA, Kouichi, Hideki YOSHIDA, Toshiaki KUNIEDA, and Mikio MURAI. "On The Durability Of Carbon-Coated Metal-Evaporated Video Tape." Journal of the Magnetics Society of Japan 18, S_1_PMRC_94_1 (1994): S1_299–302. http://dx.doi.org/10.3379/jmsjmag.18.s1_299.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

SEKI, Hiroshi, Hideyuki UEDA, Kenji KUWAHARA, Masaru ODAGIRI, and Toshiaki KUNIEDA. "Carbon Protective Layer of Metal Evaporated Tape for Digital VCR." Journal of the Magnetics Society of Japan 18, S_1_PMRC_94_1 (1994): S1_541–544. http://dx.doi.org/10.3379/jmsjmag.18.s1_541.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Singla, Mithun, Christiana Chang, Gangbing Song, Zhaohui Yang, and Xiaoxuan Ge. "Automatic Controls for the Carbon Fiber Tape-Based Deicing Technology." Journal of Cold Regions Engineering 28, no. 1 (March 2014): 04013001. http://dx.doi.org/10.1061/(asce)cr.1943-5495.0000063.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Bhushan, B., B. K. Gupta, R. Sundaram, S. Dey, S. Anders, A. Anders, I. G. Brown, and P. D. Reader. "Development of hard carbon coatings for thin-film tape heads." IEEE Transactions on Magnetics 31, no. 6 (1995): 2976–78. http://dx.doi.org/10.1109/20.490208.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Aripin, Asep Bustanil, Takashi Yamamoto, Makoto Nishi, and Kunio Hayakawa. "Electromagnetic shielding property of laminated carbon fiber tape reinforced thermoplastics." Polymer-Plastics Technology and Materials 59, no. 12 (March 13, 2020): 1308–16. http://dx.doi.org/10.1080/25740881.2020.1738472.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Makeev, Andrew, Guillaume Seon, and Edward Lee. "Failure Predictions for Carbon/Epoxy Tape Laminates with Wavy Plies." Journal of Composite Materials 44, no. 1 (September 15, 2009): 95–112. http://dx.doi.org/10.1177/0021998309345352.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Nelyub, V. A., B. L. Gorberg, M. V. Grishin, S. Yu Sarvadii, B. R. Shub, A. A. Berlin, and G. V. Malysheva. "Properties and Technology of Applying Metal Coatings to Carbon Tape." Fibre Chemistry 50, no. 6 (March 15, 2019): 524–27. http://dx.doi.org/10.1007/s10692-019-10022-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Huang, Tingting, Hongsheng Cui, Dafa Yang, Xiangjun Kong, and Jinxin Lin. "Continuous dyeing processes for zipper tape in supercritical carbon dioxide." Journal of Cleaner Production 158 (August 2017): 95–100. http://dx.doi.org/10.1016/j.jclepro.2017.04.167.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Mochida, I., Seong Ho Yoon, and Y. Korai. "Preparation and structure of mesophase pitch-based thin carbon tape." Journal of Materials Science 28, no. 8 (January 1, 1993): 2135–40. http://dx.doi.org/10.1007/bf00367574.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Jiang, Feng, Lin Qi, Guojun Song, and Hua-Zhong Yu. "Carbon tape-assisted electrodeposition and characterization of arrayed micro-/nanostructures." Electrochimica Acta 380 (June 2021): 138192. http://dx.doi.org/10.1016/j.electacta.2021.138192.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Yang, Wenshu, Claudio Badini, Laura Fuso, Sara Biamino, Matteo Pavese, Claudia Bolivar, and Paolo Fino. "Preparation and prospective application of short carbon fiber/SiC multilayer composites by tape casting." World Journal of Engineering 8, no. 4 (December 1, 2011): 331–34. http://dx.doi.org/10.1260/1708-5284.8.4.331.

Повний текст джерела

Анотація:

Silicon carbide multilayer composites containing short carbon fibers (Csf/SiC) were prepared by tape casting and pressureless sintering. The C fibers were dispersed with dispersants into a solvent mixture firstly and then mixed with SiC slurry to make green Csf/SiC tapes. Triton X100 was found to be the best dispersant for Toho Tenax HTC124 fibers. Fibers resulted homogeneously distributed in the tape and tended to align fairly well along the tape casting direction. The addition of short C fibers hindered the shrinkage in the plane containing the fibers during sintering. The resulting microstructure of the composite materials was investigated. This kind of composite layers could be integrated in a thermal protection system (TPS) structure, since the outer dense SiC layers can provide excellent oxidation resistance and good heat conductivity in the plane, while Csf/SiC layers in the middle of the multilayer architecture could grant low thermal conductivity through the TPS thickness.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Nelyub, V. A. "Influence study of copper and zinc coatings on properties of carbon fibers and composites based on them." All the Materials. Encyclopedic Reference Book, no. 10 (October 2020): 26–31. http://dx.doi.org/10.31044/1994-6260-2020-0-10-26-31.

Повний текст джерела

Анотація:

Two types of metallic coatings (copper and zinc) were deposited on the surface of a unidirectional carbon tape by the method of magnetron sputtering. Results of experimental evaluation of strength of elementary carbon fibers with these metallic coatings and carbon-reinforced plastics based on them are presented. It has been found that the copper coating increases strength of the fibers and the carbon-reinforced plastics in case of the interlaminar displacement. The zinc coating decreases strength of the fibers and composites based on them. Parameters of the carbon fibers with metallic coatings after long-term storage of metallized carbon tapes are presented.

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Noh, Kim, and Kim. "Comparative Performance of Four Electrodes for Measuring the Electromechanical Response of Self-Damage Detecting Concrete under Tensile Load." Sensors 19, no. 17 (August 21, 2019): 3645. http://dx.doi.org/10.3390/s19173645.

Повний текст джерела

Анотація:

Self-damage or/and stress-sensing concrete is a promising area of research for measuring the electromechanical response of structural materials using more robust sensors. However, the copper and silver paste sensors widely used in such applications can be expensive and have detrimental effects on the load carrying capacity and durability of the structural systems upon which they are installed. Accordingly, this study compared the performance of four electrode types—conventional copper tape with silver paste (CS), copper film with type 1 carbon tape (CC1), copper film with type 2 carbon tape (CC2), and copper wire and film with type 2 carbon tape (WC2)—to develop an economical and practical electrode for measuring the electromechanical response of self-damage-detecting concrete. The CC1 electrode exhibited comparable performance to the CS electrode in measuring the electromechanical response of self-damage-detecting concrete, despite requiring a longer polarization time (80 s) than the CS electrode (25 s). The CS electrode exhibited a higher damage-sensing capacity (GF2), whereas the CC1 electrode exhibited a higher strain-sensing capacity (GF1), as well as good damage-sensing capacity. Therefore, the CC1 electrode using copper film with type 1 carbon tape was determined to be the best alternative to the conventional CS electrode.

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Grechushkina, D. E., and V. A. Nelyub. "Kinetics study of spreading processes of epoxy binders on carbon cloth surface with metal coating." Repair, Reconditioning, Modernization, no. 3 (March 2021): 34–38. http://dx.doi.org/10.31044/1684-2561-2021-0-3-34-38.

Повний текст джерела

Анотація:

The results of experimental studies of kinetics of spreading processes of epoxy binders on the surface of a carbon (cloth) tape depending on a reinforcement pattern are presented. A copper coating of 100 nm thickness was deposited on reinforced materials by magnetron sputtering. It has been found out that a metal coating on the surface of a carbon tape and cloth leads to a considerable increase in the rate of spreading processes only for the laying-out pattern 0°, when binder movement in capillaries is provided. The deposition of a copper coating on the surface of the carbon tape and cloth has considerably the bigger influence on kinetics of the spreading processes, increasing it by 35%.

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Kwon, Young Jin, and Young Bae Han. "Fabrication of the Anode Supported Solid Oxide Fuel Cells by Tape-Casting Process and Infiltration Method." Key Engineering Materials 783 (October 2018): 79–87. http://dx.doi.org/10.4028/www.scientific.net/kem.783.79.

Повний текст джерела

Анотація:

The hydrogen is promising energy carrier due to its high energy density, convenient transportation, eternal sources in the earth and cleanness. Solid oxide fuel cells (SOFCs) have not been commercialized yet even though it has been studied for decades. The issues about solid oxide fuel cells are manufacturing process and electrochemical performance. Tape-casting process has an advantage of cost reduction for mass production. it is reported that infiltration improves electrochemical performance of SOFCs by enhancing the three phase boundary (TPB) and porosity. To fabricate the electrode with porous scaffold structure for infiltration, pore formers were added in the tape-casting slurry. In this study, four types of mixtures of several pore formers such as carbon black, graphite, poly methyl methacrylate and glassy carbon were estimated. Micro structure of each type is investigated through scanning electron microscope (SEM). The thickness of the unit cell manufactured by tape-casting is in the range of 200 - 250 μm. The fabricated unit cell with carbon black and glassy carbon shows the open circuit voltage 1.07 V at 800°C. As a result of the study, mixed ratio of pore formers was researched for Solid Oxide Fuel Cells manufacturing process applied by tape-casting and infiltration method.

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Anoshkin, Aleksandr N., Pavel V. Pisarev, and Yulia S. Kirova. "Numerical modeling of automated tape placement process of unidirectional thermoplastic." MATEC Web of Conferences 224 (2018): 01080. http://dx.doi.org/10.1051/matecconf/201822401080.

Повний текст джерела

Анотація:

Within the framework of the present work, studies are being carried out to select the tooling material for the automated placement of the thermoplastic prepreg. A mathematical model of the heating of the tooling and a thermoplastic prepreg tape with an automated placement of the prepreg on the mandrel is developed. In the framework of numerical experiments, two rigs made of steel and carbon fiber were considered. Based on the results of numerical experiments, the temperature field distributions in the laid out part and in the tooling were obtained. The analysis of the obtained results revealed that when using metal tools, a considerable heat removal from the heated layers of the thermoplastic is observed, which can significantly influence the crystallization process of the thermoplastic. Also on the carbon-fiber tooling, the laser warming spot is more localized than in the metallic one. On the basis of the data obtained, the linear deformation of the rigging was calculated, it was found that the maximum deformations in the steel tooling are three times higher than the maximum deformations in the carbon fiber. It is determined that when using metal equipment, a significant heat removal from the heated layers of the thermoplastic is observed.

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Clancy, Gearóid, Daniël Peeters, Ronan M. O'Higgins, and Paul M. Weaver. "In-line variable spreading of carbon fibre/thermoplastic pre-preg tapes for application in automatic tape placement." Materials & Design 194 (September 2020): 108967. http://dx.doi.org/10.1016/j.matdes.2020.108967.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Dietz, Marianne E., Libby A. Stern, Andria Hobbs Mehltretter, Ashley Parish, Velvet McLasky, and Roman Aranda. "Forensic utility of carbon isotope ratio variations in PVC tape backings." Science & Justice 52, no. 1 (March 2012): 25–32. http://dx.doi.org/10.1016/j.scijus.2011.05.003.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Lee, Sang Won, Wonseok Lee, Dongtak Lee, Yeseong Choi, Woong Kim, Jinsung Park, Jeong Hoon Lee, Gyudo Lee, and Dae Sung Yoon. "A simple and disposable carbon adhesive tape-based NO2 gas sensor." Sensors and Actuators B: Chemical 266 (August 2018): 485–92. http://dx.doi.org/10.1016/j.snb.2018.03.161.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Arifin, Nor, Tim Button, and Robert Steinberger-Wilckens. "Carbon-Tolerant Ni/ScCeSZ via Aqueous Tape Casting for IT- SOFCs." ECS Transactions 78, no. 1 (May 30, 2017): 1417–25. http://dx.doi.org/10.1149/07801.1417ecst.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Maeno, Yohei, and Yoshikazu Nakayama. "Experimental Investigation of Adhesive Behavior in Carbon Nanotube Based Gecko Tape." Journal of Adhesion 88, no. 3 (March 2012): 243–52. http://dx.doi.org/10.1080/00218464.2012.655177.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Endo, Katsumi, Junko Ishikawa, Osamu Yoshida, and Noriyuki Kitaori. "The Application of a Carbon Protective Layer to Metal Evaporated Tape." Japanese Journal of Applied Physics 35, Part 1, No. 6A (June 15, 1996): 3565–68. http://dx.doi.org/10.1143/jjap.35.3565.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Michaeli, W., C. Hopmann, and R. Schöldgen. "Analytical Methodology for Evaluating Tape Laid Carbon Fibre Reinforced Pa12 Components." International Polymer Science and Technology 39, no. 4 (April 2012): 1–9. http://dx.doi.org/10.1177/0307174x1203900401.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Yamashita, Shinichiro, Yuto Nakashima, Jun Takahashi, Kazumasa Kawabe, and Tetsuhiko Murakami. "Volume resistivity of ultra-thin chopped carbon fiber tape reinforced thermoplastics." Composites Part A: Applied Science and Manufacturing 90 (November 2016): 598–605. http://dx.doi.org/10.1016/j.compositesa.2016.08.027.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Grove, S. M. "Thermal modelling of tape laying with continuous carbon fibre-reinforced thermoplastic." Composites 19, no. 5 (September 1988): 367–75. http://dx.doi.org/10.1016/0010-4361(88)90124-3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Grouve, W. J. B., L. L. Warnet, B. Rietman, H. A. Visser, and R. Akkerman. "Optimization of the tape placement process parameters for carbon–PPS composites." Composites Part A: Applied Science and Manufacturing 50 (July 2013): 44–53. http://dx.doi.org/10.1016/j.compositesa.2013.03.003.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Zhang, W., and E. E. Hellstrom. "The influence of carbon on melt processing Ag sheathed Bi2Sr2CaCu2O8 tape." Physica C: Superconductivity 234, no. 1-2 (December 1994): 137–45. http://dx.doi.org/10.1016/0921-4534(94)90065-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Ivanov, D. K., K. G. Ivanov, and O. N. Uryupin. "Tape Thermoelectric Generator Based on Carbon Fiber with p-n-Junctions." Fibre Chemistry 53, no. 3 (September 2021): 199–200. http://dx.doi.org/10.1007/s10692-021-10267-1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Ohashi, Kazuhito, Y. Sumimoto, Y. Fujita, Hiroyuki Hasegawa, and Shinya Tsukamoto. "The Possibility of Dressless Restoration of Grindactivity in Dry Grinding of Carbon." Key Engineering Materials 389-390 (September 2008): 356–61. http://dx.doi.org/10.4028/www.scientific.net/kem.389-390.356.

Повний текст джерела

Анотація:

The grinding performance of wheel remarkably decreases by the loading of wheel surface in dry grinding of hard carbon parts. In this report, we propose the removal method of loaded carbon chips in which an adhesive tape is removed with carbon chips after putting on a loaded wheel surface by an elastic roller with the setting load . The removal characteristics are experimentally investigated by analyzing the projecting height of abrasive grains, removal force of adhesive tape and so on. The removal method results in the enough projecting height of abrasive grain.

Стилі APA, Harvard, Vancouver, ISO та ін.

Статті в журналах з теми "Carbon tape"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями