Добірка наукової літератури з теми "Carbon fibre (CF)"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Carbon fibre (CF)".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Carbon fibre (CF)"
Li, Nan, Xiuxiu Yang, Feng Bao, Yunxing Pan, Chenghao Wang, Bo Chen, Lishuai Zong, Chengde Liu, Jinyan Wang, and Xigao Jian. "Improved Mechanical Properties of Copoly(Phthalazinone Ether Sulphone)s Composites Reinforced by Multiscale Carbon Fibre/Graphene Oxide Reinforcements: A Step Closer to Industrial Production." Polymers 11, no. 2 (February 1, 2019): 237. http://dx.doi.org/10.3390/polym11020237.
Повний текст джерелаLi, J. "Interfacial features of polyamide 6 composites filled with oxidation modified carbon fibres." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 223, no. 9 (May 22, 2009): 2135–41. http://dx.doi.org/10.1243/09544062jmes1402.
Повний текст джерелаZhang, Qiangjun, Yong C. Wang, Constantinos Soutis, Colin G. Bailey, and Yuan Hu. "Fire Safety Assessment of Epoxy Composites Reinforced by Carbon Fibre and Graphene." Applied Composite Materials 27, no. 5 (July 14, 2020): 619–39. http://dx.doi.org/10.1007/s10443-020-09824-4.
Повний текст джерелаHofmann, Marcel, Dirk Wenzel, Bernd Gulich, Heike Illing-Günther, and Daisy Nestler. "Development of Nonwoven Preforms Made of Pure Recycled Carbon Fibres (rCF) for Applications of Composite Materials." Key Engineering Materials 742 (July 2017): 555–61. http://dx.doi.org/10.4028/www.scientific.net/kem.742.555.
Повний текст джерелаKovačević, Stana, Snježana Brnada, Ivana Schwarz, and Ana Kiš. "Bicomponent Carbon Fibre within Woven Fabric for Protective Clothing." Polymers 12, no. 12 (November 27, 2020): 2824. http://dx.doi.org/10.3390/polym12122824.
Повний текст джерелаHao, Siqi, Lizhe He, Jiaqi Liu, Yuhao Liu, Chris Rudd, and Xiaoling Liu. "Recovery of Carbon Fibre from Waste Prepreg via Microwave Pyrolysis." Polymers 13, no. 8 (April 10, 2021): 1231. http://dx.doi.org/10.3390/polym13081231.
Повний текст джерелаMudhukrishnan, M., P. Hariharan, and S. K. Malhotra. "Characterization of Glass Fibre/Carbon Fibre Hybrid Thermoplastics Composite Laminates Fabricated by Film Stacking Method." Applied Mechanics and Materials 787 (August 2015): 518–22. http://dx.doi.org/10.4028/www.scientific.net/amm.787.518.
Повний текст джерелаAgarwal, Jyoti, Smita Mohanty, and Sanjay K. Nayak. "Polypropylene hybrid composites: Effect of reinforcement of sisal and carbon fibre on mechanical, thermal and morphological properties." Journal of Polymer Engineering 41, no. 6 (April 20, 2021): 431–41. http://dx.doi.org/10.1515/polyeng-2019-0355.
Повний текст джерелаTanaka, Kazuto, Daiki Kugimoto, and Tsutao Katayama. "Effects of Temperature on the Fibre Matrix Interfacial Shear Strength of Carbon Nanotube Grafted Carbon Fibre Reinforced Heat Resistant Resin." Key Engineering Materials 827 (December 2019): 488–92. http://dx.doi.org/10.4028/www.scientific.net/kem.827.488.
Повний текст джерелаZhang, Haiming, Junzong Feng, Liangjun Li, Yonggang Jiang, and Jian Feng. "Preparation of a carbon fibre-reinforced carbon aerogel and its application as a high-temperature thermal insulator." RSC Advances 12, no. 22 (2022): 13783–91. http://dx.doi.org/10.1039/d2ra00276k.
Повний текст джерелаДисертації з теми "Carbon fibre (CF)"
Bin, Junid Ramli. "Multiscale carbon fibre composites with epoxy-graphite nanoplatelet matrices." Thesis, University of Manchester, 2017. https://www.research.manchester.ac.uk/portal/en/theses/multiscale-carbon-fibre-composites-with-epoxygraphite-nanoplatelet-matrices(332f171a-d7a8-4346-90c1-fa08e42b058b).html.
Повний текст джерелаSwarbrick, Arthur L. "Understanding the impact of coatings on the friction performance of carbon fibre ceramic composite brakes." Thesis, Loughborough University, 2013. https://dspace.lboro.ac.uk/2134/15055.
Повний текст джерелаWang, Yuan. "Friction surface development and its structure on carbon fibre reinforced silicon carbide disc." Thesis, Loughborough University, 2011. https://dspace.lboro.ac.uk/2134/10003.
Повний текст джерелаZhang, Qiuhong. "Carbon Nanotubes on Carbon Fibers: Synthesis, Structures and Properties." Dayton, Ohio : University of Dayton, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1272515887.
Повний текст джерелаTitle from PDF t.p. (viewed 06/23/10). Advisor: Liming Dai. Includes bibliographical references (p. 136-162). Available online via the OhioLINK ETD Center.
André, Natália Manente. "Friction spot joining of aluminum alloy 2024-t3 and carbon-fiber-reinforced polyphenylene sulfide composite laminate with additional pps film interlayer." Universidade Federal de São Carlos, 2015. https://repositorio.ufscar.br/handle/ufscar/8275.
Повний текст джерелаApproved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-11-08T18:38:42Z (GMT) No. of bitstreams: 1 DissNMA.pdf: 5169564 bytes, checksum: 024c06d911b0aca7d5ad498353cc25ef (MD5)
Approved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-11-08T18:38:48Z (GMT) No. of bitstreams: 1 DissNMA.pdf: 5169564 bytes, checksum: 024c06d911b0aca7d5ad498353cc25ef (MD5)
Made available in DSpace on 2016-11-08T18:38:54Z (GMT). No. of bitstreams: 1 DissNMA.pdf: 5169564 bytes, checksum: 024c06d911b0aca7d5ad498353cc25ef (MD5) Previous issue date: 2015-11-30
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Friction Spot Joining (FSpJ) is a prize-winning joining technique for hybrid metal-polymer composite structures. This master thesis was devised to investigate the feasibility of FSpJ of metal-composite structures with additional film interlayer. Friction spot joints of aluminum alloy 2024-T3 and carbon-fiberreinforced polyphenylene sulfide laminate composite with additional PPS film interlayer were successfully produced. The highest peak temperature achieved during the joining process was 417°C. DSC analysis demonstrated that the degree of crystallinity decreased for the composite (from 22% to 12%) and increased for the PPS film (from 7% to 27%) after joining. TGA analysis indicated that no extensive thermo-mechanical degradation induced by the joining process occurred. The main bonding mechanisms of FSp joint were identified as macro- and micro-mechanical interlocking, as well as adhesion forces. The process-related microstructural effects were evaluated and correlated to the local mechanical performance of the joining parts through micro and nanohardness. Further, mechanical grinding, sandblasting and plasma activation surface pre-treatments were performed on the composite part to enhance the adhesion between the joining parts. The generated surface features due to the surface pre-treatments were correlated to the mechanical performance of the joints. Sandblasted specimens showed the best mechanical performance among the surface pre-treatments used in this work. The lap shear strength of joints with interlayer (2703 ± 114 N up to 3069 ± 166 N) was up to 55% higher than the corresponding joints without film. The fatigue life of the joints with interlayer was 4 times longer in comparison with those without interlayer; superior fatigue strength was also observed. The durability of the joints was evaluated through hydrothermal accelerated aging; the maximum reduction in initial strength was 12.4% for 28 days of aging. Finally, the failure mechanisms of the joints were discussed, demonstrating a mixture of adhesivecohesive failure mode.
A União Pontual por Fricção (FSpJ) é uma técnica internacionalmente premiada para união de estruturas híbridas metal-compósito polimérico. Esta dissertação de mestrado investigou a viabilidade técnica da produção de juntas metal-compósito com filme polimérico intermediário através do FSpJ. Juntas de alumínio 2024-T3 e laminado compósito de poli(sulfeto de fenileno) (PPS) reforçado com fibras de carbono com filme intermediário de PPS foram produzidas com sucesso. A máxima temperatura processual identificada foi de 417°C. Análises de DSC demonstraram decréscimo no grau de cristalinidade do compósito (de 22% para 12%) e acréscimo no caso do filme intermediário (de 7% para 27%) depois de submetidos ao processo de união. Análises de TGA não identificaram evidências de ocorrência de degradação termomecânica dos componentes poliméricos das juntas induzida pelo FSpJ. Os principais mecanismos de união identificados na interface das juntas foram macro- e micro-ancoramento mecânico, além de forças adesivas. As mudanças microestruturais induzidas pelo processo de união foram investigadas e correlacionadas com o desempenho mecânico local dos componentes da junta através de medidas de micro e nanodureza. Pré-tratamentos superficiais de lixamento, jateamento de areia e ativação por plasma foram realizados no componente compósito a fim de aprimorar a adesão entre os componentes a serem unidos. As superfícies pré-tratadas foram caracterizadas e suas propriedades foram correlacionadas com a resistência mecânica das juntas correspondentes. As amostras jateadas produziram juntas com a melhor resistência mecânica entre os pré-tratamentos superficiais investigados neste estudo. A resistência ao cisalhamento das juntas com filme (2703 ± 114 N até 3069 ± 166 N) apresentou-se até 55% superior à resistência das respectivas juntas sem filme. A vida em fadiga das juntas com filme apresentou-se cerca de 4 vezes mais longa em comparação às juntas sem filme. A durabilidade das juntas foi investigada através de envelhecimento hidrotérmico acelerado, sendo que a máxima redução em resistência ao cisalhamento foi de 12,4% para 28 dias de envelhecimento. Finalmente, os mecanismos de falha das juntas foram discutidos, demonstrando a predominância do modo coesivo de falha.
Esteves, João Victor Almeida. "União pontual por fricção (“friction spot joining”) de alumínio 6181-T4 com compósito laminado de poli(sulfeto de fenileno) e fibra de carbono (CF-PPS)." Universidade Federal de São Carlos, 2015. https://repositorio.ufscar.br/handle/ufscar/7345.
Повний текст джерелаApproved for entry into archive by Ronildo Prado (ronisp@ufscar.br) on 2016-09-21T18:13:46Z (GMT) No. of bitstreams: 1 DissJVAE.pdf: 4217973 bytes, checksum: 5bff49bb1884d56f5cb1d7e47edfd24f (MD5)
Approved for entry into archive by Ronildo Prado (ronisp@ufscar.br) on 2016-09-21T18:13:57Z (GMT) No. of bitstreams: 1 DissJVAE.pdf: 4217973 bytes, checksum: 5bff49bb1884d56f5cb1d7e47edfd24f (MD5)
Made available in DSpace on 2016-09-21T18:23:53Z (GMT). No. of bitstreams: 1 DissJVAE.pdf: 4217973 bytes, checksum: 5bff49bb1884d56f5cb1d7e47edfd24f (MD5) Previous issue date: 2015-02-26
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
The friction spot joining (FSpJ) emerges as an alternative and innovative technique for producing polymer-metal hybrid structures. This technique was developed and patented by HZG / Germany in 2012. The process uses a combination of tools that by friction generates heat leading to the formation of a polymer layer through the interface and mechanical interlocking between the joints partners. Previous studies have demonstrated the technical feasibility of producing hybrid joints by FSpJ, however, no studies have demonstrated the influence of the process parameters on the joints properties. This study aimed to produce hybrid joints of 6181-T4 aluminum alloy and carbon fiber reinforced poly(phenylene sulfide) laminate composite (CF-PPS) by FSpJ and investigate the influence of process and aluminum surface treatment on the structure and the mechanical strength of these joints. The proper combination of these parameters resulted in hybrid joints with single lap shear force of up to 1861 N (29 MPa) and 3522 N (55 MPa) for double lap joints. This level of shear strength is similar or superior to others metal / polymeric composite joints produced by conventional joining techniques, demonstrating the potential of the FSpJ. The rotational speed (RS) was the parameter with the greatest influence on the shear strength of the joints, followed by the joining time (JT), tool plunge depth (PD) and joining force (JF). Joints that had predominantly cohesive fracture showed higher shear strength. Joints that were cooled at lower rates showed higher joint shear strength, regardless the heat input, due to lower residual stress at the interface of these joints. Through simple aluminum surface treatment (griding followed by acid pickling) it was possible to achieve an increasing up to 160% in the shear strength of the joints.
A união pontual por fricção (“Friction Spot Joining – FSpJ”) desponta como uma técnica alternativa e inovadora para produzir estruturas híbridas metal-polímero. Esta técnica foi desenvolvida e patenteada pela HZG / Alemanha em 2012. O processo utiliza uma combinação de ferramentas que através da fricção sobre o metal gera calor levando a formação de camada polimérica na interface e de travamento mecânico entre as chapas. Estudos anteriores demonstraram a viabilidade técnica para produção de juntas híbridas, porém, não há estudos demonstrando efetivamente a influência dos parâmetros de união nas propriedades das juntas. Este estudo teve como objetivo produzir juntas híbridas de alumínio 6181-T4 e compósito laminado de poli(sulfeto de fenileno) e fibra de carbono (CF-PPS) por FSpJ, e investigar a influência de parâmetros de processo e tratamento superficial do alumínio sobre a estrutura e a resistência mecânica dessas juntas. A combinação apropriada desses parâmetros resultou em juntas híbridas com força máxima em cisalhamento de até 1861 N (29 MPa) na geometria junta pontual sobreposta simples e de 3522 N (55 MPa) na geometria de junta sobreposta dupla. Esse nível de resistência mecânica é similar ou superior ao de outras juntas metal-compósito polimérico produzidas por técnicas convencionais de união, demonstrando o potencial da técnica FSpJ. A velocidade rotacional (VR) foi o parâmetro com maior influência na resistência ao cisalhamento das juntas, seguida pelo tempo de união (TU), profundidade de penetração (PP) e força de união (FU). As juntas com falha predominantemente coesiva apresentaram resistência ao cisalhamento superior. Foi verificado que juntas produzidas em menores taxas de resfriamento apresentam maior desempenho mecânico, independentemente do aporte térmico utilizado, devido a menor tensão residual na interface dessas juntas. Através de tratamentos superficiais simples no alumínio (lixamento seguido de decapagem ácida) foi possível alcançar aumento de até 160% na resistência ao cisalhamento das juntas.
Liu, Yu. "Etude d'interface entre matrice polymère et renforts à base de carbone, à l'aide d'observations multiéchelles et multimodales en microscopie électronique." Thesis, Université Paris-Saclay (ComUE), 2017. http://www.theses.fr/2017SACLC059/document.
Повний текст джерелаThis thesis aims to investigate the multiscale (nano-, micro-, and macro-scopic) behavior of the composites based on a fine investigation using the most modern techniques, to understand the interfaces and to quantify them. Two series of reinforcements on a micrometer scale, carbon fibers (CFs) and graphene-based materials, were studied here. To improve the interactions between these nanofillers and the surrounding polymer matrix, two major routes were used in this thesis: the oxidation of the fillers and the grafting of carbon nanotubes on their surface.The study itself was conducted on a microscopic scale on the interfacial strength between CFs and the epoxy matrix, with tensile tests carried out in-situ in the chamber of a double-column FIB-SEM microscope (scanning electron microscope coupled to a focused ion beam). The ion beam was used to mill a thin bond-shaped tensile specimen of composite containing both an epoxy and a CF part. Thetensile stress field was applied using the nanomanipulator and the test was observed both via the ionic and the electronic columns (with two different angles of view) to estimate the strain field, hence the interfacial strength when the failure is observed. A similar experiment was led on a composite with GNPs.Finally, the transmission electron microscopy (TEM) study of the interface region between the epoxy and the graphene-based nanofillers revealed the existence of an interphase and allowed to measure its thickness and give an indication of its nature. For this purpose, an EELS (electron energy-loss spectroscopy) analysis was carried out, making it possible to measure the density of the sample very locally (probe size of the order of a tenth of a nanometer) across or parallelly to an interface. A scenario on the chemical bonding modes between the two media as a function of the surface treatment used makes it possible to explain the nature of the observed interphases
Частини книг з теми "Carbon fibre (CF)"
García-Arrieta, Sonia, Essi Sarlin, Amaia De La Calle, Antonello Dimiccoli, Laura Saviano, and Cristina Elizetxea. "Thermal Demanufacturing Processes for Long Fibers Recovery." In Systemic Circular Economy Solutions for Fiber Reinforced Composites, 81–97. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_5.
Повний текст джерелаKempe, G., H. Krauss, and G. Korger-Roth. "Adhesion and Welding of Continuous Carbon-Fiber Reinforced Polyether Etherketone (CF-PEEK/APC2)." In Developments in the Science and Technology of Composite Materials, 105–12. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0787-4_12.
Повний текст джерелаCopani, Giacomo, Maryam Mirpourian, Nikoletta Trivyza, Athanasios Rentizelas, Winifred Ijomah, Sarah Oswald, and Stefan Siegl. "New Business Models and Logistical Considerations for Composites Re-use." In Systemic Circular Economy Solutions for Fiber Reinforced Composites, 385–415. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_19.
Повний текст джерела"CF – Carbon Fiber." In Encyclopedia of Tribology, 346. Boston, MA: Springer US, 2013. http://dx.doi.org/10.1007/978-0-387-92897-5_100173.
Повний текст джерелаGe, Jia, Wei Tan, Giuseppe Catalanotti, Brian G. Falzon, John McClelland, Colm Higgins, Yan Jin, and Dan Sun. "Understanding Chip Formation in Orthogonal Cutting of Aeronautical Thermoplastic CF/PEKK Composites Based on Finite Element Method." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220584.
Повний текст джерелаde Jesús Pellegrini Cervantes, Manuel, Margarita Rodríguez Rodriguez, Susana Paola Arredondo Rea, Ramón Corral Higuera, and Carlos Paulino Barrios Durstewitz. "Recycled Conductive Mortar." In Masonry for Sustainable Construction [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.109000.
Повний текст джерелаJoon, Seema, and S. K. Dhawan. "EMI Shielding Properties of Conducting Poly (aniline-co-o-toluidine)-CF-Novolac Composites." In Smart Materials Design for Electromagnetic Interference Shielding Applications, 411–38. BENTHAM SCIENCE PUBLISHERS, 2022. http://dx.doi.org/10.2174/9789815036428122010012.
Повний текст джерелаKumar, Rakesh, and S. K. Dhawan. "Fabrication and Microwave Shielding Properties of Free-Standing Conducting Polymer-Carbon Fiber Thin Sheets." In Smart Materials Design for Electromagnetic Interference Shielding Applications, 355–410. BENTHAM SCIENCE PUBLISHERS, 2022. http://dx.doi.org/10.2174/9789815036428122010011.
Повний текст джерелаRubans, S. R., R. Raja, Sabitha Jannet, N. Venkateshwaran, S. Gurusideswar, and Naresh Kakur. "Effects of Infill Speed and Heat Treatment on Mechanical Properties of Carbon Fiber Reinforced Polyethylene Terephthalate Glycol (CF-PETG) Composites." In Reference Module in Materials Science and Materials Engineering. Elsevier, 2022. http://dx.doi.org/10.1016/b978-0-12-820352-1.00255-8.
Повний текст джерелаТези доповідей конференцій з теми "Carbon fibre (CF)"
Alexandrescu, Laurentia, Mihai Georgescu, Maria Sönmez, Anton Ficai, Roxana Trusca, and Ioana Lavinia Ardelean. "Polyamide/Polyethylene/Carbon Fibre Polymer Nanocomposites." In The 9th International Conference on Advanced Materials and Systems. INCDTP - Leather and Footwear Research Institute (ICPI), Bucharest, Romania, 2022. http://dx.doi.org/10.24264/icams-2022.i.2.
Повний текст джерелаVENKATACHALAM,, VINOTHINI, JON BINNER, THOMAS REIMER, BUCKARD ESSER, STEFANO MUNGIGUERRA, and RAFFAELE SAVINO. "PROCESSING OF ULTRA-HIGH TEMPERATURE CERAMIC MATRIX COMPOSITES (UHTCMCS) THROUGH RF ENHANCED CHEMICAL VAPOUR INFILTRATION (RF-CVI)." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35775.
Повний текст джерелаKumar, Kundan, C. Jariwala, R. Pillai, N. Chauhan, and P. M. Raole. "Preparation & characterization of SiO2 interface layer by dip coating technique on carbon fibre for Cf/SiC composites." In ADVANCED MATERIALS AND RADIATION PHYSICS (AMRP-2015): 4th National Conference on Advanced Materials and Radiation Physics. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4929204.
Повний текст джерелаZhou, Uuanxin, Ying Wang, Yuanming Xia, and Shaik Jeelani. "Dynamic Tensile Properties of Carbon Fiber and Carbon Fiber Reinforced Aluminum." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-15732.
Повний текст джерелаYuuki, Hisakura, Kitahara Kenichi, Sugihara Makoto, Imajo Akihiko, and Hamada Hiroyuki. "Mechanical Properties of GF/CF Hybrid ABS Composite by DFFIM." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-66280.
Повний текст джерелаGill, Amaninder Singh, Darian Visotsky, Laine Mears, and Joshua D. Summers. "Cost Estimation Model for PAN Based Carbon Fiber Manufacturing Process." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8724.
Повний текст джерелаYOUNG, DEVIN, BRITANNIA VONDRASEK, and MICHAEL CZABAJ. "INVESTIGATION OF MECHANICAL PROPERTIES OF COMPOSITES-BASED SHEET LAMINATION ADDITIVE MANUFACTURING PROCESS." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36463.
Повний текст джерелаZHANG, DANDAN, XINGKANG SHE, YIPENG HE, WESLEY A. CHAPKIN,, VI T. BREGMAN, RUMIN WANG, and ALAN TAUB. "BRIDGING OF CARBON FIBERS IN CF/EPOXY COMPOSITES USING ELECTROSTATICALLY INDUCED CNT ALIGNMENT." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35765.
Повний текст джерелаYao, Riwu, Jianfeng Shi, and Jinyang Zheng. "Mechanical Enhancement and Strain Sensing of Electrofusion Joint With Carbon-Fiber-Reinforced Polyethylene." In ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/pvp2019-93347.
Повний текст джерелаZhou, Chongyao, Zhiming Huang, Yongtian Kang, Dagang Zhang, Naiquan Ye, and Svein Sævik. "The Study of a New Concept of Flexible Pipe With Carbon Fiber/Epoxy Reinforced Inner Sheath." In ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/omae2017-61069.
Повний текст джерела