Добірка наукової літератури з теми "Carbon deposition resistance"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Carbon deposition resistance".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Carbon deposition resistance"
Shi, Yu, Shiwei Wang, Yiming Li, Fan Yang, Hongbo Yu, Yuting Chu, Tong Li, and Hongfeng Yin. "Improving Anti-Coking Properties of Ni/Al2O3 Catalysts via Synergistic Effect of Metallic Nickel and Nickel Phosphides in Dry Methane Reforming." Materials 15, no. 9 (April 22, 2022): 3044. http://dx.doi.org/10.3390/ma15093044.
Повний текст джерелаQingliang, Shen, Li Hejun, Zhao Fengling, Song Qiang, and Fu Qiangang. "Electrophoretic deposition of carbon nanotubes for improved ablation resistance of carbon/carbon composites." Corrosion Science 132 (March 2018): 204–13. http://dx.doi.org/10.1016/j.corsci.2018.01.001.
Повний текст джерелаTanaka, Kazuto, Takanobu Nishikawa, Kazuhiro Aoto, and Tsutao Katayama. "Effect of Carbon Nanotube Deposition Time to the Surface of Carbon Fibres on Flexural Strength of Resistance Welded Carbon Fibre Reinforced Thermoplastics Using Carbon Nanotube Grafted Carbon Fibre as Heating Element." Journal of Composites Science 3, no. 1 (January 12, 2019): 9. http://dx.doi.org/10.3390/jcs3010009.
Повний текст джерелаXu, Xian Feng, Ling Sheng Zeng, Tian Ouyang, and Ling Zhi Chai. "Carbon Felt Properties of Pyrolytic Carbon Felt Direct Thermal CVD." Materials Science Forum 852 (April 2016): 1371–75. http://dx.doi.org/10.4028/www.scientific.net/msf.852.1371.
Повний текст джерелаBannov, Alexander G., Ondřej Jašek, Jan Prášek, Jiří Buršík, and Lenka Zajíčková. "Enhanced Ammonia Adsorption on Directly Deposited Nanofibrous Carbon Films." Journal of Sensors 2018 (September 17, 2018): 1–14. http://dx.doi.org/10.1155/2018/7497619.
Повний текст джерелаChae, Hyang Hoon, Bo-Hye Kim, Kap Seung Yang, and Hee-Gweon Woo. "Boric Oxide Deposition on Carbon Nanofibers for Oxidation Resistance." Journal of Nanoscience and Nanotechnology 13, no. 8 (August 1, 2013): 5645–48. http://dx.doi.org/10.1166/jnn.2013.7065.
Повний текст джерелаKalenik, Jerzy, Konrad Kielbasinski, Piotr Firek, Elżbieta Czerwosz, and Jan Szmidt. "Thermal properties of modified carbon films." Circuit World 42, no. 1 (February 1, 2016): 37–41. http://dx.doi.org/10.1108/cw-10-2015-0055.
Повний текст джерелаZeng, Yan, Ayano Kimura, Peipei Zhang, Jiaming Liang, Jiaqi Fan, Liwei Xiao, Chengwei Wang, Guohui Yang, Xiaobo Peng, and Noritatsu Tsubaki. "Resistance against Carbon Deposition via Controlling Spatial Distance of Catalytic Components in Methane Dehydroaromatization." Catalysts 11, no. 2 (January 21, 2021): 148. http://dx.doi.org/10.3390/catal11020148.
Повний текст джерелаLU, J. W., W. L. WANG, K. J. LIAO, and B. Y. WAN. "STRAIN-INDUCED RESISTANCE CHANGES OF CARBON NANOTUBE FILMS." International Journal of Modern Physics B 19, no. 01n03 (January 30, 2005): 627–29. http://dx.doi.org/10.1142/s0217979205029183.
Повний текст джерелаHannula, Pyry-Mikko, Minttu Junnila, Dawid Janas, Jari Aromaa, Olof Forsén, and Mari Lundström. "Carbon Nanotube Fiber Pretreatments for Electrodeposition of Copper." Advances in Materials Science and Engineering 2018 (2018): 1–8. http://dx.doi.org/10.1155/2018/3071913.
Повний текст джерелаДисертації з теми "Carbon deposition resistance"
Rykaczewski, Konrad. "Electron beam induced deposition (EBID) of carbon interface between carbon nanotube interconnect and metal electrode." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/31773.
Повний текст джерелаCommittee Chair: Dr. Andrei G. Fedorov; Committee Member: Dr. Azad Naeemi; Committee Member: Dr. Suresh Sitaraman; Committee Member: Dr. Vladimir V. Tsukruk; Committee Member: Dr. Yogendra Joshi. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Oliphant, Clive Justin. "Filament carburization during the hot-wire chemical vapour deposition of carbon nanotubes." Thesis, University of the Western Cape, 2008. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_7060_1263948958.
Повний текст джерелаFiedler, Holger. "Preparation and characterization of Carbon Nanotube based vertical interconnections for integrated circuits: Preparation and characterization of Carbon Nanotube based verticalinterconnections for integrated circuits." Doctoral thesis, Universitätsverlag der Technischen Universität Chemnitz, 2013. https://monarch.qucosa.de/id/qucosa%3A20091.
Повний текст джерелаDie kontinuierliche Miniaturisierung der charakteristischen Abmessungen in hochintegrierten Schaltungen (ULSI) verursacht einen Anstieg des Widerstandes im Zuleitungssystem aufgrund der erhöhten Streuung von Elektronen an Seitenwänden und Korngrenzen in der Cu-Technologie, wodurch die Verzögerungszeit des Zuleitungssystems ansteigt. Die herausragenden Eigenschaften von Kohlenstoffnanoröhren (CNT), wie eine große mittlere freie Weglänge, hohe thermische Leitfähigkeit und eine starke Resistenz gegenüber Elektromigration machen diese zu einem idealen Kandidaten, um Cu in zukünftigen Technologiegenerationen zu ersetzen. Die vorliegende Arbeit beschreibt die Herstellung und daraus resultierenden Eigenschaften von Zwischenebenenkontakten (Vias) basierend auf CNTs. Alle verwendeten Prozessierungsschritte sind kompatibel mit der Herstellung von hochintegrierten Schaltkreisen und eine Schnittstelle zwischen den CNT Vias und einer Cu-Metallisierung ist vorhanden. Insbesondere das Verfahren zur Evaluierung von CNT Vias wurde durch den Einsatz verschiedener Methoden verbessert. Insbesondere soll hervorgehoben werden, dass durch die Messung des Widerstandes eines einzelnen CNTs, bei bekannter CNT Dichte, der Via Widerstand sehr genau vorausgesagt werden kann. Dies ermöglicht eine systematische Untersuchung des Einflusses der verschiedenen Prozessschritte und der darin verwendeten Materialien auf den Via Widerstand. Der niedrigste Kontaktwiderstand wird für Karbidformierende Metalle erreicht, solange Oxidationsprozesse ausgeschlossen werden können. Obwohl Metallnitride einen höheren Kontaktwiderstand aufweisen, sind diese für die Unterseitenmetallisierung zu empfehlen, da dadurch die Oxidation der leitfähigen Schicht minimiert wird. Insgesamt kann eine Reihenfolge beginnend mit dem niedrigsten zum höchsten Kontaktwiderstand aufgestellt werden: Ta < Ti < TaN < TiN « TiO2 « Ta2O5 Desweiteren wurde der Einfluss von Verfahren nach dem CNTWachstum wie die chemischmechanische Planarisierung, eine HF Behandlung und einer Temperaturbehandlung evaluiert, sowie deren Einfluss auf die elektrischen Parameter des Vias untersucht. Die Leitfähigkeit der integrierten CNTs und die daraus resultierenden elektrischen Transporteigenschaften in Abhängigkeit der CNT Qualität und Länge werden besprochen. Ebenso wird die starke Korrelation zwischen dem Temperaturkoeffizienten des elektrischen Widerstandes und des Ausgangswiderstandes der CNT basierten Vias bei Raumtemperatur diskutiert.
ANTUNES, RENATO A. "Caracterização do comportamento frente à corrosão de um aço inoxidável austenítico para aplicações biomédicas com revestimentos PVD de TiN, TiCN e DLC." reponame:Repositório Institucional do IPEN, 2006. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11493.
Повний текст джерелаMade available in DSpace on 2014-10-09T14:02:35Z (GMT). No. of bitstreams: 0
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
Fiedler, Holger. "Preparation and characterization of Carbon Nanotube based vertical interconnections for integrated circuits." Doctoral thesis, Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-149474.
Повний текст джерелаDie kontinuierliche Miniaturisierung der charakteristischen Abmessungen in hochintegrierten Schaltungen (ULSI) verursacht einen Anstieg des Widerstandes im Zuleitungssystem aufgrund der erhöhten Streuung von Elektronen an Seitenwänden und Korngrenzen in der Cu-Technologie, wodurch die Verzögerungszeit des Zuleitungssystems ansteigt. Die herausragenden Eigenschaften von Kohlenstoffnanoröhren (CNT), wie eine große mittlere freie Weglänge, hohe thermische Leitfähigkeit und eine starke Resistenz gegenüber Elektromigration machen diese zu einem idealen Kandidaten, um Cu in zukünftigen Technologiegenerationen zu ersetzen. Die vorliegende Arbeit beschreibt die Herstellung und daraus resultierenden Eigenschaften von Zwischenebenenkontakten (Vias) basierend auf CNTs. Alle verwendeten Prozessierungsschritte sind kompatibel mit der Herstellung von hochintegrierten Schaltkreisen und eine Schnittstelle zwischen den CNT Vias und einer Cu-Metallisierung ist vorhanden. Insbesondere das Verfahren zur Evaluierung von CNT Vias wurde durch den Einsatz verschiedener Methoden verbessert. Insbesondere soll hervorgehoben werden, dass durch die Messung des Widerstandes eines einzelnen CNTs, bei bekannter CNT Dichte, der Via Widerstand sehr genau vorausgesagt werden kann. Dies ermöglicht eine systematische Untersuchung des Einflusses der verschiedenen Prozessschritte und der darin verwendeten Materialien auf den Via Widerstand. Der niedrigste Kontaktwiderstand wird für Karbidformierende Metalle erreicht, solange Oxidationsprozesse ausgeschlossen werden können. Obwohl Metallnitride einen höheren Kontaktwiderstand aufweisen, sind diese für die Unterseitenmetallisierung zu empfehlen, da dadurch die Oxidation der leitfähigen Schicht minimiert wird. Insgesamt kann eine Reihenfolge beginnend mit dem niedrigsten zum höchsten Kontaktwiderstand aufgestellt werden: Ta < Ti < TaN < TiN « TiO2 « Ta2O5 Desweiteren wurde der Einfluss von Verfahren nach dem CNTWachstum wie die chemischmechanische Planarisierung, eine HF Behandlung und einer Temperaturbehandlung evaluiert, sowie deren Einfluss auf die elektrischen Parameter des Vias untersucht. Die Leitfähigkeit der integrierten CNTs und die daraus resultierenden elektrischen Transporteigenschaften in Abhängigkeit der CNT Qualität und Länge werden besprochen. Ebenso wird die starke Korrelation zwischen dem Temperaturkoeffizienten des elektrischen Widerstandes und des Ausgangswiderstandes der CNT basierten Vias bei Raumtemperatur diskutiert
Löffler, Markus. "Nanomanipulation and In-situ Transport Measurements on Carbon Nanotubes." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-33242.
Повний текст джерелаMit dem Aufkommen von Mikroelektronik und mikromechanischen Systemen wurden die Vorteile miniaturisierter Geräte augenscheinlich. Mit der Entdeckung von Kohlenstoff-Nanoröhren durch Iijima 1991 wurde ein Material gefunden, welches überlegene Eigenschaften wie hohe Festigkeit, exzellente elektrische und Wärmeleitfähigkeit zeigt, während es zeitgleich leicht und flexibel ist. Diese Eigentschaften können durch eine Änderung der spezifischen atomaren Anordnung in der Nanoröhrenhülle beeinflusst werden. Der erste Teil dieser Dissertationsschrift behandelt einen neuartigen Syntheseansatz, welche die bekannten Syntheserouten der chemischen Gasphasenabscheidung und Laserablation kombiniert. Die Ergebnisse bezüglich des Durchmessers und der Ausbeute lassen sich gut mit einem etablierten Modell der Nukleation und des Wachstums von Kohlenstoff-Nanoröhren beschreiben - sie erweitern es, indem sie einen größeren Parameterraum berücksichtigen. Des Weiteren wurde konventionelle Laserablation benutzt, um C-13 angereicherte Kohlenstoff-Nanoröhren herzustellen, deren Durchmesser nicht nur von den üblichen Parametern, sondern auch vom C-13 Anteil abhängt. Diese Abhängigkeit geht mit der veränderten thermischen Leitfähigkeit von Isotopenmischungen einher. Die Manipulation von Kohlenstoff-Nanoröhren in einem Transmission-Elektronenmikroskop formt den zweiten Teil der Dissertationschrift. Mit Hilfe eines in-situ Manipulators wurden vielfältige Experimente durchgeführt, um die mechanischen und elektrischen Eigenschaften der Kohlenstoff-Nanoröhren zu bestimmen. Zweipunktmessungen des Widerstands einzelner Nanoröhren und die Beobachtung des Versagens einzelner Kohlenstoffschichten erlaubte die Bestimmung der Stromtragfähigkeit einzelner Hüllen. Mit Hilfe eines elektrischen Stromes konnte eine Nanoröhre durch die veränderung der Struktur in ihren elektrischen Eigenschaften verändert werden. Unter Verwendung dauerhaften oder gepulsten Gleichstroms konnte die Eisen- oder Zementit-Füllung der Kohlenstoff-Nanoröhren in eine polaritätsabhängige Richtung bewegt werden. Die Füllung wurde dabei durch die Wände der Nanoröhre geführt. Abhängig von Strom, Form der Nanoröhre und Zusammensetzung der Füllung ließen sich verschiedene Bereiche des Materialtransports identifizieren, u.a. das Umarbeiten einiger innerer Kohlenstoffschichten. Ein hoher Strom hingegen bewirkt eine Umarbeitung der kompletten Nanoröhre und strominduziertes Wachstum von Kohlenstoff-Nanostrukturen mit veränderter Morphologie. Mit Hilfe der gewonnenen Resultate wurde ein Transportmodell entwickelt, welches den Impulstransfer von Elektronen an Füllungsatome sowie einen festen Füllungskern während des Transports diskutiert. Messungen der mechanischen Eigenschaften, welche mit Hilfe von resonanter oder nicht-resonanter elektrischer Anregung von Schwingungen im Transmissions-Elektronenmikroskop durchgeführt wurden bilden den Abschluss der Arbeit. Durch die Beobachtungen konnten mit einem modifizierten Euler-Bernoulli-Balkenmodell wichtige mechanische Eigenschaften bestimmt werden
Choi, Song Ho. "Development of SOFC anodes resistant to sulfur poisoning and carbon deposition." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/26601.
Повний текст джерелаCommittee Chair: Meilin Liu; Committee Member: Arun Gokhale; Committee Member: Christoper Summers; Committee Member: Preet Singh; Committee Member: Tom Fuller. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Steinhorst, Maximilian, Maurizio Giorgio, Slavcho Topalski, and Teja Roch. "Investigation of carbon-based coatings on austenitic stainless steel for bipolar plates in proton exchange membrane fuel cells, produced by cathodic arc deposition." 2019. https://monarch.qucosa.de/id/qucosa%3A36197.
Повний текст джерелаLöffler, Markus. "Nanomanipulation and In-situ Transport Measurements on Carbon Nanotubes." Doctoral thesis, 2009. https://tud.qucosa.de/id/qucosa%3A25282.
Повний текст джерелаMit dem Aufkommen von Mikroelektronik und mikromechanischen Systemen wurden die Vorteile miniaturisierter Geräte augenscheinlich. Mit der Entdeckung von Kohlenstoff-Nanoröhren durch Iijima 1991 wurde ein Material gefunden, welches überlegene Eigenschaften wie hohe Festigkeit, exzellente elektrische und Wärmeleitfähigkeit zeigt, während es zeitgleich leicht und flexibel ist. Diese Eigentschaften können durch eine Änderung der spezifischen atomaren Anordnung in der Nanoröhrenhülle beeinflusst werden. Der erste Teil dieser Dissertationsschrift behandelt einen neuartigen Syntheseansatz, welche die bekannten Syntheserouten der chemischen Gasphasenabscheidung und Laserablation kombiniert. Die Ergebnisse bezüglich des Durchmessers und der Ausbeute lassen sich gut mit einem etablierten Modell der Nukleation und des Wachstums von Kohlenstoff-Nanoröhren beschreiben - sie erweitern es, indem sie einen größeren Parameterraum berücksichtigen. Des Weiteren wurde konventionelle Laserablation benutzt, um C-13 angereicherte Kohlenstoff-Nanoröhren herzustellen, deren Durchmesser nicht nur von den üblichen Parametern, sondern auch vom C-13 Anteil abhängt. Diese Abhängigkeit geht mit der veränderten thermischen Leitfähigkeit von Isotopenmischungen einher. Die Manipulation von Kohlenstoff-Nanoröhren in einem Transmission-Elektronenmikroskop formt den zweiten Teil der Dissertationschrift. Mit Hilfe eines in-situ Manipulators wurden vielfältige Experimente durchgeführt, um die mechanischen und elektrischen Eigenschaften der Kohlenstoff-Nanoröhren zu bestimmen. Zweipunktmessungen des Widerstands einzelner Nanoröhren und die Beobachtung des Versagens einzelner Kohlenstoffschichten erlaubte die Bestimmung der Stromtragfähigkeit einzelner Hüllen. Mit Hilfe eines elektrischen Stromes konnte eine Nanoröhre durch die veränderung der Struktur in ihren elektrischen Eigenschaften verändert werden. Unter Verwendung dauerhaften oder gepulsten Gleichstroms konnte die Eisen- oder Zementit-Füllung der Kohlenstoff-Nanoröhren in eine polaritätsabhängige Richtung bewegt werden. Die Füllung wurde dabei durch die Wände der Nanoröhre geführt. Abhängig von Strom, Form der Nanoröhre und Zusammensetzung der Füllung ließen sich verschiedene Bereiche des Materialtransports identifizieren, u.a. das Umarbeiten einiger innerer Kohlenstoffschichten. Ein hoher Strom hingegen bewirkt eine Umarbeitung der kompletten Nanoröhre und strominduziertes Wachstum von Kohlenstoff-Nanostrukturen mit veränderter Morphologie. Mit Hilfe der gewonnenen Resultate wurde ein Transportmodell entwickelt, welches den Impulstransfer von Elektronen an Füllungsatome sowie einen festen Füllungskern während des Transports diskutiert. Messungen der mechanischen Eigenschaften, welche mit Hilfe von resonanter oder nicht-resonanter elektrischer Anregung von Schwingungen im Transmissions-Elektronenmikroskop durchgeführt wurden bilden den Abschluss der Arbeit. Durch die Beobachtungen konnten mit einem modifizierten Euler-Bernoulli-Balkenmodell wichtige mechanische Eigenschaften bestimmt werden.
Книги з теми "Carbon deposition resistance"
Miyoshi, Kazuhisa. Diamond and diamondlike carbon as wear-resistant, self-lubricating coatings for silicon nitride. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.
Знайти повний текст джерелаMiyoshi, Kazuhisa. Friction and wear properties of as-deposited and carbon ion-implanted diamond films. Cleveland, Ohio: Lewis Research Center, 1994.
Знайти повний текст джерелаMiyoshi, Kazuhisa. Friction and wear properties of as-deposited and carbon ion-implanted diamond films. [Washington, D.C: National Aeronautics and Space Administration, 1996.
Знайти повний текст джерелаMiyoshi, Kazuhisa. Friction and wear of ion-beam-deposited diamondlike carbon on chemical-vapor-deposited, fine-grain diamond. [Washington, D.C: National Aeronautics and Space Administration, 1996.
Знайти повний текст джерелаMiyoshi, Kazuhisa. Friction and wear of ion-beam-deposited diamondlike carbon on chemical-vapor-deposited, fine-grain diamond. [Washington, D.C: National Aeronautics and Space Administration, 1996.
Знайти повний текст джерелаMiyoshi, Kazuhisa. Friction and wear of ion-beam-deposited diamondlike carbon on chemical-vapor-deposited, fine-grain diamond. [Washington, D.C: National Aeronautics and Space Administration, 1996.
Знайти повний текст джерелаMiyoshi, Kazuhisa. Friction and wear of ion-beam-deposited diamondlike carbon on chemical-vapor-deposited, fine-grain diamond. [Washington, D.C: National Aeronautics and Space Administration, 1996.
Знайти повний текст джерелаMiyoshi, Kazuhisa. Surface design and engineering toward wear-resistant, self-lubricant diamond films and coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.
Знайти повний текст джерелаMiyoshi, Kazuhisa. Surface design and engineering toward wear-resistant, self-lubricant diamond films and coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.
Знайти повний текст джерелаUnited States. National Aeronautics and Space Administration., ed. Diamond and diamondlike carbon as wear-resistant, self-lubricating coatings for silicon nitride. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.
Знайти повний текст джерелаЧастини книг з теми "Carbon deposition resistance"
Chang, Shih-Hsien, Chih-Chung Chang, and Cheng Liang. "Improving the Surface Hardness and Wear Resistance of S45C Carbon Steel Via Various Heat Treatments and pH Values of Electroless Ni-P Deposition." In Recent Trends in Nanotechnology and Materials Science, 1–13. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-04516-0_1.
Повний текст джерелаDomingues, Beatriz, Joana M. Silva, Ivo M. Aroso, Estêvão Lima, Alexandre A. Barros, and Rui L. Reis. "Coatings for Urinary Stents: Current State and Future Directions." In Urinary Stents, 209–23. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04484-7_18.
Повний текст джерелаAzadi, Mahboobeh. "Deposition of TiN, TiC, and DLC Coatings by PACVD." In Production, Properties, and Applications of High Temperature Coatings, 381–402. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-4194-3.ch014.
Повний текст джерелаSingh, Aniket, Aman Shukla, Aryan Singh, Aman Deep Singh, and Pawan Kumar Arora. "Review on Process Parameters of FDM and Their Impact on Tensile Strength and Wear Resistance of Additive Manufacturing Specimen." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220753.
Повний текст джерелаScheiffarth, Jakob H., Brian J. Wagner, Karl Brennfleck, and Wolf Huettner. "Increasing high temperature oxidation and corrosion resistance of graphite and carbon-fiber-reinforced carbon by deposition of a low pressure chemically vapor-deposited silicon carbide coating." In Metallurgical Coatings and Thin Films 1992, 13–18. Elsevier, 1992. http://dx.doi.org/10.1016/b978-0-444-89900-2.50009-9.
Повний текст джерелаMilone, Margherita, and Teerin Liewluck. "Progressive Weakness and Rash." In Mayo Clinic Cases in Neuroimmunology, edited by Andrew McKeon, B. Mark Keegan, and W. Oliver Tobin, 154–56. Oxford University Press, 2021. http://dx.doi.org/10.1093/med/9780197583425.003.0050.
Повний текст джерелаAmirtharaj Mosas, Kamalan Kirubaharan, Dinesh Kumar Devarajan, Subhenjit Hazra, and Gobi Saravanan Kaliaraj. "Recent Advancements in Wear-Resistant Coatings Prepared by PVD Methods." In Handbook of Research on Tribology in Coatings and Surface Treatment, 174–95. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-9683-8.ch008.
Повний текст джерелаTinker, Peter B., and Peter Nye. "Microbiological Modification of the Rhizosphere." In Solute Movement in the Rhizosphere. Oxford University Press, 2000. http://dx.doi.org/10.1093/oso/9780195124927.003.0012.
Повний текст джерелаТези доповідей конференцій з теми "Carbon deposition resistance"
Yu, Choongho, Li Shi, Alan M. Cassell, Brett A. Cruden, Quoc Ngo, and Jun Li. "Thermal Contact Resistance and Thermal Conductivity of a Carbon Nanofiber." In ASME 2005 Summer Heat Transfer Conference collocated with the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems. ASMEDC, 2005. http://dx.doi.org/10.1115/ht2005-72320.
Повний текст джерелаTANAKA, KAZUTO, KAZUHIRO AOTO, and TSUTAO KATAYAMA. "EFFECTS OF CARBON NANOTUBE DEPOSITION TIME TO CARBON FIBER ON TENSILE LAP-SHEAR STRENGTH OF RESISTANCE WELDED CFRTP." In MATERIALS CHARACTERISATION 2017. Southampton UK: WIT Press, 2017. http://dx.doi.org/10.2495/mc170321.
Повний текст джерелаÖzmen, Yılmaz. "Tribological Behavior of Carbon Based Materials." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-50233.
Повний текст джерелаDallaire, S. "Erosion and Abrasion Resistance of Fe2B-Based Arc-Sprayed Coatings and Weld Overlays Containing Chromium and Carbon." In ITSC 2012, edited by R. S. Lima, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, A. McDonald, and F. L. Toma. ASM International, 2012. http://dx.doi.org/10.31399/asm.cp.itsc2012p0788.
Повний текст джерелаTong, Tao, Yang Zhao, Lance Delzeit, Ali Kashani, and Arun Majumdar. "Multiwalled Carbon Nanotube/Nanofiber Arrays as Conductive and Dry Adhesive Interface Materials." In ASME 2004 3rd Integrated Nanosystems Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/nano2004-46013.
Повний текст джерелаWhite, Richard L., Bing K. Yen, Jan-Ulrich Thiele, Hans-Herman Schneider, James H. Rogers, and Bernd Jacoby. "Comparison of Energetic Carbon Deposition Processes for Use As Ultra-Thin Disk Overcoats." In STLE/ASME 2001 International Joint Tribology Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/trib-nano2001-109.
Повний текст джерелаVoss, Sterling, Bret Mecham, Lucy Bowden, Jacquelyn Monroe, Anton E. Bowden, and Brian D. Jensen. "316L Stainless Steel Sensitization in Carbon Nanotube CVD Growth for Bacterial Resistance." In ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22391.
Повний текст джерелаSojoudi, Hossein, Fernando Reiter, and Samuel Graham. "Transparent Electrodes From Graphene/Single Wall Carbon Nanotube Composites." In ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ipack2013-73158.
Повний текст джерелаKawakami, Hiroshi, Masato Ohnishi, Ken Suzuki, and Hideo Miura. "Highly Sensitive 2D Strain Sensor Using Carbon Nanotube." In ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ipack2013-73156.
Повний текст джерелаRothman, M. F. "Oxidation Resistance of Gas Turbine Combustion Materials." In ASME 1985 International Gas Turbine Conference and Exhibit. American Society of Mechanical Engineers, 1985. http://dx.doi.org/10.1115/85-gt-10.
Повний текст джерела