Добірка наукової літератури з теми "Carbon composites Effect of high temperatures on"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Carbon composites Effect of high temperatures on".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Carbon composites Effect of high temperatures on"
Huang, E. Wen, Chung Kai Chang, Wen Jay Lee, Soo Yeol Lee, Jun Wei Qiao, and Chung Hao Chen. "Thermal-Effect Study on a Carbon-Carbon Composite Using Synchrotron X-Ray Measurements & Molecular Dynamics Simulation." Materials Science Forum 777 (February 2014): 35–39. http://dx.doi.org/10.4028/www.scientific.net/msf.777.35.
Повний текст джерелаCao, Sheng Hu, Zhi Shen Wu, and Feng Li. "Effects of Temperature on Tensile Strength of Carbon Fiber and Carbon/Epoxy Composite Sheets." Advanced Materials Research 476-478 (February 2012): 778–84. http://dx.doi.org/10.4028/www.scientific.net/amr.476-478.778.
Повний текст джерелаAbbas, Imran, Yanxiang Wang, Hassan Elahi, Muhammad Ali Siddiqui, Mudaser Ullah, and Faisal Qayyum. "Effect of MoSi2-Si3N4/SiC Multi-Layer Coating on the Oxidation Resistance of Carbon/Carbon Composites above 1770 K." Journal of Composites Science 4, no. 3 (July 3, 2020): 86. http://dx.doi.org/10.3390/jcs4030086.
Повний текст джерелаIorfida, Antonio, Sebastiano Candamano, Fortunato Crea, Luciano Ombres, Salvatore Verre, and Piero de Fazio. "Bond Behaviour of FRCM Composites: Effects of High Temperature." Key Engineering Materials 817 (August 2019): 161–66. http://dx.doi.org/10.4028/www.scientific.net/kem.817.161.
Повний текст джерелаLeng, Ling, Xin You, Jianhong Yi, Caiju Li, Yichun Liu, Taofang Zeng, and Dong Fang. "In-Situ Preparation of High-Performance CNS/Cu Composites with Molten Salt Route." Nano 16, no. 05 (April 29, 2021): 2150056. http://dx.doi.org/10.1142/s1793292021500569.
Повний текст джерелаYang, Baifeng, Zhufeng Yue, Xiaoliang Geng, Peiyan Wang, Jian Gan, and Baohua Liao. "Effects of space environment temperature on the mechanical properties of carbon fiber/bismaleimide composites laminates." Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 232, no. 1 (November 5, 2017): 3–16. http://dx.doi.org/10.1177/0954410017740382.
Повний текст джерелаHaincová, Eliška, and Pavlína Hájková. "Effect of Boric Acid Content in Aluminosilicate Matrix on Mechanical Properties of Carbon Prepreg Composites." Materials 13, no. 23 (November 27, 2020): 5409. http://dx.doi.org/10.3390/ma13235409.
Повний текст джерелаJohnston, Joel P., J. Michael Pereira, Charles R. Ruggeri, and Gary D. Roberts. "High-speed infrared thermal imaging during ballistic impact of triaxially braided composites." Journal of Composite Materials 52, no. 25 (March 19, 2018): 3549–62. http://dx.doi.org/10.1177/0021998318765290.
Повний текст джерелаRahaman, M., Tapan Kumar Chaki, and D. Khastgir. "Temperature Dependent Electrical Properties of Conductive Composites (Behavior at Cryogenic Temperature and High Temperatures)." Advanced Materials Research 123-125 (August 2010): 447–50. http://dx.doi.org/10.4028/www.scientific.net/amr.123-125.447.
Повний текст джерелаZhong, Wen, Siqiang Chen, and Zhe Tong. "High-Temperature Tribological Behavior of HDPE Composites Reinforced by Short Carbon Fiber under Water-Lubricated Conditions." Materials 15, no. 13 (June 27, 2022): 4508. http://dx.doi.org/10.3390/ma15134508.
Повний текст джерелаДисертації з теми "Carbon composites Effect of high temperatures on"
Makhar, Sandeep P. "Mechanical properties of SU-8 and carbon nanotubes reinforced SU-8 from room temperature to high temperatures." Diss., Online access via UMI:, 2006.
Знайти повний текст джерелаDurkin, Craig Raymond. "Low-Cost Continuous Production of Carbon Fiber-Reinforced Aluminum Composites." Thesis, Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19857.
Повний текст джерелаRussell-Stevens, Mark. "The effect of thermal cycling on the mechanical and thermal properties of ultra-high modulus carbon fibre reinforced magnesium composites." Thesis, University of Oxford, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.418475.
Повний текст джерелаLiu, Chun-Fu, and 劉俊甫. "Effect of peroxides on the positive temperature coefficient behaviors of high density polyethylene/carbon black composites." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/36988758380329773832.
Повний текст джерела大同大學
材料工程學系(所)
92
Abstract In this investigation, the effect of particle size of HDPE, carbon black content, plasma treatment, 60Co ��-ray irradiate dose, different initiators and content on the positive temperature coefficient(PTC) behavior and negative temperature coefficient(NTC) behavior of high density polyethylene/carbon black(HDPE/CB) composites were studied. On the other hand, the surface morphology observations and dynamic mechanical properties of HDPE/CB composite were also studied. The low temperature (T< 120°C) resistance of composites decreased with decreasing the size of PE and using plasma to treat polyethylene. The cross-linking density of composite could be increased by using plasma to treat PE. In comparison with the initiators, AIBN, BPO and DCP, DCP has a superior efficiency on restraint NTC effect occurred. In this investigation, the composition which possessed the 7.8 order of PTC intensity was PHDPE(40W,3min)/CB(35wt%)/DCP(2phr) without using 60Coγ-ray to irradiate. The NTC effect of composites could be eliminated by adding initiator, plasma treatment and 60Co ��-ray irradiation.
Walls, Joshua C. "High temperature compression testing of an advanced carbon-carbon composite in an oxidating atmosphere /." 2002. http://www.library.umaine.edu/theses/theses.asp?Cmd=abstract&ID=MEE2002-006.
Повний текст джерелаLu, Chih-Yuan, and 呂志遠. "Effect of Plasma Treatment on PTC and NTC Behaviors of High Density Polyethylene/Carbon Black Composites." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/48169010162333622368.
Повний текст джерела大同大學
材料工程研究所
90
In this investigation, the effect of carbon black content, plasma treatment, cross-linking agent content, -ray radiation dose, and heat treatment on the positive temperature coefficient (PTC) and negative temperature coefficient (NTC) of high density polyethylene/carbon black (HDPE/CB) composites were studied. On the other hand, the dynamic mechanical properties of HDPE/CB composite were also studied. In this study, 35 wt % of CB content was the percolation threshold concentration. The HDPE pre-treated with plasma (40W, 3min) possessed the best PTC intensity. It was found that the PTC intensity and NTC effect of plasma treated HDPE (PHDPE)/carbon black were decreased with increasing cross-linking agent content. As adding 1 phr of cross-linking agent into PHDPE/CB composite, the PTC intensity was increased and the negative temperature coefficient (NTC) effect was decreased. To remove NTC effect completely, the radiation dose for PHDPE/CB (30 wt %) takes 5 M-ray, PHDPE/CB (35 wt %) takes 10 M-ray and PHDPE/CB (40 wt %) takes 20 M-ray. As HDPE was pretreated by plasma, the radiation dose and NTC effective of composites could be improved. Heat treatment could be used to improve the electrical reproducibility of PHDPE/CB composites. On the other hand, the reproducibility of resistance at room temperature of composite also could be improved by using plasma to pre-treated HDPE.
Chen, Hung-Ling, and 陳虹伶. "Effect of Plasma Treatment and dditives on PTC and NTC Behavior of High Density Polyethylene/Carbon black composites." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/18921530275862582084.
Повний текст джерела大同大學
材料工程學系(所)
92
In this investigation, the effect of carbon black content, plasma treatment, 60Co γ-ray irradiate dose and additives on the positive temperature coefficient(PTC) behavior and negative temperature coefficient(NTC) behavior of high density polyethylene/carbon black(HDPE/CB) composites were studied. On the other hand, the surface morphology observations, the fracture surface morphology observations and the dynamic mechanical properties of HDPE/CB composite were also studied. It was found that the plasma pretreated was slightly decreased the NTC effect. On the other hand, adding dicumyl peroxide(DCP) and irradiation by 60Coγ-ray irradiation were good methods for increasing the PTC intensity. Used the dynamic mechanical analysis were processed the same result. In this investigation, the composites of PHDPE(40W.30min)/CB(40wt%)/DCP(2phr)/5M-rad possessed 7 order of PTC intensity. After 10 times thermal cycle measurement the reproducibility of PHDPE(40W.30min)/CB(40wt%)/ DCP(2phr)/5M-rad was very good. PHDPE(40W.30min)/CB(40wt%)/ DCP(2phr)/10M-rad possessed 8 order of PTC intensity. These two composites could be used PTC element under economical consideration.
Ramalall, Dawlall Shahil. "The relationship between the metal dusting mechanism and the synthesis of carbon nanofilaments using toluene and a nickel based alloy." Thesis, 2016. http://hdl.handle.net/10539/21729.
Повний текст джерелаMetal dusting (MD) is a severe type of corrosion that occurs mainly in petrochemical industries. The occurrence of MD is mainly due to syngas attacking Fe-, Ni- and Co-based alloys at elevated temperatures. More recently, literature has shown that apart from syngas, liquid hydrocarbon sources have been causing problems on platformer units in refineries. In the first part of this study a highly corrosion resistant Ni-based alloy (Hastelloy C276), in its polished form, was subjected to MD conditions at 800 °C using a liquid hydrocarbon (toluene) and helium (carrier gas) for 1 h. Exposure to these conditions revealed the formation of carbon nanofilaments and graphite layers which were confirmed by laser Raman spectroscopy, scanning electron microscopy (SEM) and electron probe microanalysis (EPMA). Burning off the carbon nanofilaments and the graphite layers in laboratory air for 1 h at 800 °C revealed that pits were formed on the Hastelloy C276. These same pits were not evident when Hastelloy C276 was exposed to either the carrier gas (helium) or laboratory air alone. Besides MD being a continuous problem in industry, this mechanism has been shown to be beneficial in the synthesis of carbon nanofilaments viz., carbon nanofibers (CNTs) and nanotubes (CNFs). In the second part of this study, unpolished Hastelloy C276 blocks (as opposed to polished blocks) were used to synthesize carbon nanofilaments. This was done as prior studies had shown that carbon nanofilaments were produced with better quality and greater yields this way. Here the flow rate (80, 160 and 240 mL/min) and reaction duration (10, 15, 30, 45, 60, 120 and 240 min) were studied using toluene (a liquid hydrocarbon). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to assess the quality and quantity of the carbon nanofilaments synthesized. Besides the formation of carbon nanofilaments, a less important material known as graphite particle structures (GPSs) were also synthesized. These studies collectively showed that MD had taken place on the surface of Hastelloy C276 when exposed to toluene at 800 °C.
TG2016
Книги з теми "Carbon composites Effect of high temperatures on"
Thermomechanics of composites under high temperatures. Dordrecht: Kluwer Academic Publishers, 1999.
Знайти повний текст джерелаE, Tuttle M., and United States. National Aeronautics and Space Administration., eds. An investigation of the thermoviscoplastic behavior of a metal matrix composite at elevated temperatures. [Washington, DC: National Aeronautics and Space Administration, 1992.
Знайти повний текст джерелаauthor, Tang Chun'an, ed. Shui ni ji fu he cai liao gao wen lie hua yu sun shang: Thermal Deterioration and Damage of Cement-based Composites at Elevated Temperatures. Beijing: Ke xue chu ban she, 2012.
Знайти повний текст джерелаD, Janoff Dwight, Royals William T, Gunaji Mohan V, and International Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres (7th : 1995 : Denver, Colo.), eds. Flammability and sensitivity of materials in oxygen-enriched atmospheres. Philadelphia, PA: American Society for Testing and Materials, 1995.
Знайти повний текст джерелаAn investigation of the thermoviscoplastic behavior of a metal matrix composite at elevated temperatures. [Washington, DC: National Aeronautics and Space Administration, 1992.
Знайти повний текст джерелаE, Tuttle M., and United States. National Aeronautics and Space Administration., eds. An investigation of the thermoviscoplastic behavior of a metal matrix composite at elevated temperatures. [Washington, DC: National Aeronautics and Space Administration, 1992.
Знайти повний текст джерелаAn investigation of the thermoviscoplastic behavior of a metal matrix composite at elevated temperatures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.
Знайти повний текст джерелаFlammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres (ASTM Data Series,). American Society for Testing & Materials, 1997.
Знайти повний текст джерелаManson, S. S., and G. R. Halford. Fatigue and Durability of Metals at High Temperatures. ASM International, 2009. http://dx.doi.org/10.31399/asm.tb.fdmht.9781627083430.
Повний текст джерелаЧастини книг з теми "Carbon composites Effect of high temperatures on"
Reddy, C. Venkateshwar, Ch Joseph S. Raju, P. Ramesh Babu, and R. Ramnarayanan. "Effect of Benzoxazine on Epoxy Based Carbon Fabric Reinforced Composites for High Strength Applications." In Proceedings of International Conference on Intelligent Manufacturing and Automation, 353–67. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-2490-1_32.
Повний текст джерелаGebril, Mohamed A., Mohammad S. Aldlemey, and Abdessalam F. Kablan. "Effect of Austenization Temperatures and Times on Hardness, Microstructure and Corrosion Rate of High Carbon Steel." In Advanced Structured Materials, 421–28. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-07383-5_30.
Повний текст джерелаZhao, Xiao Jin, Wei Qin, and Ben Li Wang. "Effect of Ozone Treatment on the Interfacial Properties of High Modulus Carbon Fiber/Epoxy Composites." In Materials Science Forum, 1547–50. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-432-4.1547.
Повний текст джерелаBob, Corneliu, Sorin Dan, Catalin Badea, Aurelian Gruin, and Liana Iures. "Strengthening of the Frame Structure at the Timisoreana Brewery, Romania." In Case Studies of Rehabilitation, Repair, Retrofitting, and Strengthening of Structures, 57–80. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2010. http://dx.doi.org/10.2749/sed012.057.
Повний текст джерелаShuxin, Bai, Tong Yonggang, Ye Yicong, and Zhang Hong. "Reactive Melt Infiltration of Carbon Fiber Reinforced Ceramic Composites for Ultra-High Temperature Applications." In MAX Phases and Ultra-High Temperature Ceramics for Extreme Environments, 323–53. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-4066-5.ch011.
Повний текст джерелаRangaraj, Lingappa, Canchi Divakar, and Vikram Jayaram. "Processing of Ultra-High Temperature Ceramics for Hostile Environments." In MAX Phases and Ultra-High Temperature Ceramics for Extreme Environments, 100–124. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-4066-5.ch004.
Повний текст джерелаLi, Jianliang, Dangsheng Xiong, Yongkun Qin, and Rajnesh Tyagi. "Tribological Behavior of Ni-Based Self-Lubricating Composites at Elevated Temperatures." In Processing Techniques and Tribological Behavior of Composite Materials, 72–106. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-7530-8.ch003.
Повний текст джерелаSaito, Yahachi, and Koji Asaka. "Raman Features of Linear-Carbon-Chain and Multiwall Carbon Nanotube Composites." In Recent Developments in Atomic Force Microscopy and Raman Spectroscopy for Materials Characterization [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.99465.
Повний текст джерелаSilvestroni, Laura, and Diletta Sciti. "Effect of Transition Metal Silicides on Microstructure and Mechanical Properties of Ultra-High Temperature Ceramics." In MAX Phases and Ultra-High Temperature Ceramics for Extreme Environments, 125–79. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-4066-5.ch005.
Повний текст джерелаZhang, Weigang, Changming Xie, Min Ge, and Xi Wei. "C/C-ZrB2-ZrC-SiC Composites Derived from Polymeric Precursor Infiltration and Pyrolysis Part I." In MAX Phases and Ultra-High Temperature Ceramics for Extreme Environments, 413–34. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-4066-5.ch013.
Повний текст джерелаТези доповідей конференцій з теми "Carbon composites Effect of high temperatures on"
Patrick, Melanie, and Messiha Saad. "3D Examination of the Thermal Properties of Carbon-Carbon Composites." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-40146.
Повний текст джерелаKonduri, Teja G. K., and Olesya I. Zhupanska. "Overall Temperature-Dependent Elastic Properties of Carbon Fiber Polymer Matrix Composites at High Temperatures." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24344.
Повний текст джерелаGhose, Sayata, Kent A. Watson, Holly A. Elliott, Dennis C. Working, Jim M. Criss, Kenneth L. Dudley, Emilie J. Siochi, and John W. Connell. "Fabrication and Characterization of High Temperature Resin/Carbon Nanofiller Composites." In ASME 2006 Multifunctional Nanocomposites International Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/mn2006-17016.
Повний текст джерелаZantout, Alan, and Olesya I. Zhupanska. "Electrical Characterization of Carbon Fiber Polymer Matrix Composites." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10423.
Повний текст джерелаAkderya, Tarkan, Nesrin Horzum Polat, and Buket Okutan Baba. "The Effect of Acidic Environment on Bending Behaviour of Glass-Carbon/Epoxy Based Hybrid Composites." In 6th International Students Science Congress. Izmir International Guest Student Association, 2022. http://dx.doi.org/10.52460/issc.2022.038.
Повний текст джерелаPanakarajupally, Ragav P., Joseph Elrassi, K. Manigandan, Yogesh P. Singh, and Gregory N. Morscher. "Monitoring Damage in Non-Oxide Composites at High Temperatures Using Carbon-Containing CVD SiC Monofilament Fibers As Embedded Electrical Resistance Sensors." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-15937.
Повний текст джерелаKotikalapudi, Sai Tharun, and Raman P. Singh. "Mechanical Strength Degradation of Carbon Fiber Polymer Matrix Composites Exposed to Constant Low-Density Direct Current." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-12259.
Повний текст джерелаHuang, C. Y., C. S. Tsai, Alberto D’Amore, Domenico Acierno, and Luigi Grassia. "EFFECT OF PLASMA TREATMENT AND CROSS-LINKING ON THE OVER VOLTAGE POSITIVE TEMPERATURE COEFFICIENT OF HIGH DENSITY POLYETHYLENE∕CARBON BLACK∕MAGNESIUM HYDROXIDE NANO COMPOSITES." In IV INTERNATIONAL CONFERENCE TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2008. http://dx.doi.org/10.1063/1.2989023.
Повний текст джерелаTehrani, Mehran, Ayoub Y. Boroujeni, Ramez Hajj, and Marwan Al-Haik. "Mechanical Characterization of a Hybrid Carbon Nanotube/Carbon Fiber Reinforced Composite." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62251.
Повний текст джерелаPITTMAN, EMILY, STYLIANOS KOUMLIS, and LESLIE LAMBERSON. "DYNAMIC FACTURE OF HYDROTHERMALLY DEGRADED CARBON-EPOXY COMPOSITES." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35805.
Повний текст джерелаЗвіти організацій з теми "Carbon composites Effect of high temperatures on"
Bryant, C. A., S. A. Wilks, and C. W. Keevil. Survival of SARS-CoV-2 on the surfaces of food and food packaging materials. Food Standards Agency, November 2022. http://dx.doi.org/10.46756/sci.fsa.kww583.
Повний текст джерела