Добірка наукової літератури з теми "Carbides Thermal properties"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Carbides Thermal properties".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Carbides Thermal properties"
Tarraste, Marek, Jakob Kübarsepp, Arvo Mere, Kristjan Juhani, Märt Kolnes, and Mart Viljus. "Ultrafine Cemented Carbides with Cobalt and Iron Binders Prepared via Reactive In Situ Sintering." Solid State Phenomena 320 (June 30, 2021): 176–80. http://dx.doi.org/10.4028/www.scientific.net/ssp.320.176.
Повний текст джерелаHadi, Aseel, Ahmed Hashim Ah-yasari, and Dalal Hassan. "Fabrication of new ceramics nanocomposites for solar energy storage and release." Bulletin of Electrical Engineering and Informatics 9, no. 1 (February 1, 2020): 83–86. http://dx.doi.org/10.11591/eei.v9i1.1323.
Повний текст джерелаKorobov, Yury, Yulia Khudorozhkova, Holger Hillig, Alexander Vopneruk, Aleksandr Kotelnikov, Sergey Burov, Prabu Balu, Alexey Makarov, and Alexey Chernov. "The Effect of Thickness on the Properties of Laser-Deposited NiBSi-WC Coating on a Cu-Cr-Zr Substrate." Photonics 6, no. 4 (December 13, 2019): 127. http://dx.doi.org/10.3390/photonics6040127.
Повний текст джерелаArizmendi-Morquecho, Ana, Araceli Campa-Castilla, C. Leyva-Porras, Josué Almicar Aguilar Martinez, Gregorio Vargas Gutiérrez, Karla Judith Moreno Bello, and L. López López. "Microstructural Characterization and Wear Properties of Fe-Based Amorphous-Crystalline Coating Deposited by Twin Wire Arc Spraying." Advances in Materials Science and Engineering 2014 (2014): 1–11. http://dx.doi.org/10.1155/2014/836739.
Повний текст джерелаSaydaxmedov, Ravshan, and Kutpnisa Kadirbekova. "Study of the composition and properties of vacuum coatings based on titanium carbide." E3S Web of Conferences 264 (2021): 05023. http://dx.doi.org/10.1051/e3sconf/202126405023.
Повний текст джерелаWyzga, Piotr, Lucyna Jaworska, Piotr Putyra, Marcin Podsiadlo, and Jolanta Cyboron. "Characterization of Metal-Like Carbides-Graphene Composite Prepared by SPS Method." Key Engineering Materials 655 (July 2015): 87–91. http://dx.doi.org/10.4028/www.scientific.net/kem.655.87.
Повний текст джерелаVornberger, Anne, Tobias Picker, Johannes Pötschke, Mathias Herrmann, Berend Denkena, Alexander Krödel, and Alexander Michaelis. "Influence of Cemented Carbide Composition on Cutting Temperatures and Corresponding Hot Hardnesses." Materials 13, no. 20 (October 14, 2020): 4571. http://dx.doi.org/10.3390/ma13204571.
Повний текст джерелаMiura, Seiji, Hélio Goldenstein, Kenji Ohkubo, Hisashi Sato, Yoshimi Watanabe, and Tetsuo Mohri. "Mechanical and Physical Properties of Ni3Al-Based Alloys with Cr Carbides Dispersion." Materials Science Forum 561-565 (October 2007): 439–42. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.439.
Повний текст джерелаQin, Yi Wei, and Sen Kai Lu. "Structural Stability and Electronic Properties of Fe-Doped B13C2: First-Principles Investigation." Advanced Materials Research 652-654 (January 2013): 344–47. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.344.
Повний текст джерелаHozer, Leszek, Yet-Ming Chiang, Svetlana Ivanova, and Isa Bar-On. "Liquid-exchange processing and properties of SiC–Al composites." Journal of Materials Research 12, no. 7 (July 1997): 1785–89. http://dx.doi.org/10.1557/jmr.1997.0246.
Повний текст джерелаДисертації з теми "Carbides Thermal properties"
BOARI, ZOROASTRO de M. "Modelo matematico da influencia da distribuicao de particulas de SiC nas tensoes termicas em compositos de matriz metalica." reponame:Repositório Institucional do IPEN, 2003. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11105.
Повний текст джерелаMade available in DSpace on 2014-10-09T13:57:35Z (GMT). No. of bitstreams: 1 09021.pdf: 10882829 bytes, checksum: e229b5d74e10881ea73228929632ad10 (MD5)
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
RAMBO, CARLOS R. "Sintese e caracterizacao de ceramicas biomorficas." reponame:Repositório Institucional do IPEN, 2001. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10973.
Повний текст джерелаMade available in DSpace on 2014-10-09T14:01:55Z (GMT). No. of bitstreams: 1 07544.pdf: 4718297 bytes, checksum: 4794b7e348101fca1262cbfb437f133b (MD5)
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
Teague, Michael Phillip. "Modeling and measurement of thermal residual stresses and isotope effects on thermo physical properties of ZrB₂-SiC ceramics." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2008. http://scholarsmine.mst.edu/thesis/pdf/MichaelTeague_09007dcc8056387c.pdf.
Повний текст джерелаVita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed August 27, 2008) Includes bibliographical references.
Smrž, Peter. "Odolnost slinutého karbidu vůči vzniku a šíření tepelných trhlin." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230951.
Повний текст джерелаSánchez, Sovero Luis Francisco. "Effect of thermal annealing treatments on the optical and electrical properties of aluminum-doped, amorphous, hydrogenated silicon carbide thin films." Master's thesis, Pontificia Universidad Católica del Perú, 2019. http://hdl.handle.net/20.500.12404/14529.
Повний текст джерелаEn este trabajo de tesis se presenta el estudio las propiedades estructurales y optoelectrónicas de carburo de silicio amorfo hidrogenado dopado con aluminio fabricado mediante pulverización catódica de radio frecuencia. Las muestras se fabricaron usando target de SiC y Al de alta pureza en atmosfera de hidrogeno. Luego las películas fueron calentadas hasta la temperatura de 600°C en un horno de rápido procesamiento térmico. La difracción de rayos X confirma la naturaleza amorfa de las películas. Los espectros de absorción infrarroja muestran los diferentes enlaces hetero-nucleares mientras que la espectroscopia Raman nos muestra los diferentes enlaces hononucleares presentes en la muestra. Se evaluó la evolución de los últimos enlaces con el tratamiento térmico, mostrando un cambio en la estructura del material. Espectroscopía de dispersión de energía de rayos X nos muestra la incorporación de aluminio en la matriz de carburo de silicio amorfo. Los espectros de transmitancia UV-VIS revelan parámetros ópticos tales como energía de Tauc, energía de Iso- absorción, energía de Tauc e índice de refracción. Además, el modelo de fluctuación de bandas desarrollado recientemente nos permite determinar los bordes de movilidad y energía de Urbach. Adicionalmente, el método de Van Der Pauw nos permite determinar el valor de la resistividad eléctrica de la muestra, solo a 600°C, donde se obtuvo un comportamiento óhmico mostrando baja resistividad eléctrica, probablemente debido a un reordenamiento de los átomos inducidos térmicamente. Este reordenamiento estructural se muestra en la variación de la energía de Urbach que está asociada con el aumento de la densidad de enlaces Si-C, debido a la disociación de los enlaces relacionados con el hidrogeno.
Tesis
Lu, Xiao-Gang. "Theoretical modeling of molar volume and thermal expansion." Doctoral thesis, Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-252.
Повний текст джерелаRen, Zhe. "Intrinsic Properties of "Case" and Potential Biomedical Applications." Case Western Reserve University School of Graduate Studies / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=case1554409704895456.
Повний текст джерелаLuo, Huan. "Study of the plasma phenomenon in HiPIMS discharge. : Application to the reactive deposition of tantalum and hafnium carbide nanocomposite coatings and characterization of their physicochemical, structural, mechanical and oxidation resistance propertie." Thesis, Bourgogne Franche-Comté, 2020. http://www.theses.fr/2020UBFCA010.
Повний текст джерелаHigh Power Impulse Magnetron Sputtering technology (HiPIMS) has been developed and considered as an effective method for film preparation. HiPIMS technology allows for much greater flexibility for manipulating film structure and performance, leading to films with unique properties that are often unachievable in the other PVD approaches. However, the underlying plasma mechanism for supporting film growth is currently blurred. Moreover, HiPIMS technology is still stationed in the laboratory, many films with desirable properties have not been explored under HiPIMS framework. In this work, (i) the driven mechanism of high density plasma coherent structure (i.e., spokes) in the HiPIMS discharge and (ii) how the structure and properties of the TaC/a-C:H and HfC/a-C:H films are regulated by HiPIMS were investigated. For the driven mechanism of spokes, based on the dispersion relationship of HiPIMS plasma and the evolution of the coupling between two azimuthal waves, the coupling-induced wave model was proposed. For the TaC/a-C:H and HfC/a-C:H films, the chemical bond states, structure, morphology, mechanical and tribological properties, thermal stability as well as oxidation resistance of the films were investigated. By comparison with DC deposited films, it is demonstrated that HiPIMS technology provides a potential strategy for preparing higher performance TaC/a-C:H and HfC/a-C:H films in terms of hardness, friction coefficient and wear resistance, oxidation resistance and thermal stability by modulating the chemical bonding state and nanocomposite structure of the films through HiPIMS reactive plasma
Hung, Ya-Min, and 洪雅敏. "Investigation on the Thermal Properties of Graphene Oxide/Diamond/Silicon Carbide Composites Using Different Binders." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/gfw9dj.
Повний текст джерела國立清華大學
材料科學工程學系
106
Owing to the advancement of miniaturization of electronic devices, effective thermal management becomes an important issue to keep the devices from overheating. Thus, fabrication of composites with high thermal conductivities attracts much attention to the researcher. In this study, we synthesized graphene oxide (GO) by using the Modified Hummers method and fabricated GO/diamond/silicon carbide/polydimethylsiloxane (GO/D/SiC/PDMS) and GO/D/SiC/flour composites using GO as filler. The thermal conductivities were measured by the laser flash method to better understand how the addition of diamond (D) and SiC of different sizes, the amount of GO, and temperature affected the thermal properties of the composites. The results showed that the addition of diamond and silicon carbide of different sizes could enhance composite density, which is favorable for phonon transport, and thus increased the thermal properties. Besides, the addition of GO played an important role in bridging the particle to form more compact structure, and offer effective and faster pathways for phonon transport. Because of synergistic effects of diamond, SiC and GO, the 100GO/D/SiC/PDMS and 100GO/D/SiC/flour possess the thermal conductivities of 2.560 W/mK and 3.977 W/mK, respectively. However, as the amount of GO increased, the thermal conductivity was decreased due to the formation of GO clusters, and thermal conductivity was decreased from 2.560 W/mK for 100GO/D/SiC/PDMS to 1.211 W/mK for 250GO/D/SiC/PDMS at 25C. Similarly, thermal conductivity was decreased from 3.977 W/mK for 100GO/D/SiC/flour to 1.856 W/mK for 250GO/D/SiC/flour. When temperature increased, the thermal conductivity of 100GO/D/SiC/PDMS and 100GO/D/SiC/flour were increased to 2.990 W/mK and 4.650 W/mK, respectively. Possessing high thermal conductivities at high temperature, the composites were believed to fulfill the requirement for thermal interface materials and promising for heat management.
Книги з теми "Carbides Thermal properties"
Pankratz, L. B. Thermodynamic properties of carbides, nitrides, and other selected substances. [Washington]: United States Dept. of the Interior, Bureau of Mines, 1995.
Знайти повний текст джерелаDobson, M. M. Silicon carbide alloys. Carnforth, Lancashire, England: Parthenon Press, 1986.
Знайти повний текст джерелаDobson, M. M. Silicon carbide alloys. Carnforth, Lancashire: Parthenon Press, 1986.
Знайти повний текст джерелаWahab, Z. Abdul. Thermal and electrical properties of doped silicon carbide based ceramics. Manchester: UMIST, 1993.
Знайти повний текст джерелаHolley, C. E., Malcolm H. Rand, and E. K. Storms. The Chemical Thermodynamics of Actinide Elements and Compounds, Part 6: The Actinidecarbides/Isp424/6 (The Chemical thermodynamics of actinide elements and compounds). Intl Atomic Energy Agency, 1985.
Знайти повний текст джерелаC, Goldsby Jon, DiCarlo James A, and United States. National Aeronautics and Space Administration., eds. Effects of thermal treatment on tensile creep and stress-rupture behavior on Hi-Nicalon SiC fibers. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.
Знайти повний текст джерелаFisher, David. Mechanical Properties of MAX Phases. Materials Research Forum LLC, 2021. http://dx.doi.org/10.21741/9781644901274.
Повний текст джерелаM, Sawko Paul, and Ames Research Center, eds. Thermal degradation study of silicon carbide threads developed for advanced flexible thermal protection systems. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1992.
Знайти повний текст джерелаЧастини книг з теми "Carbides Thermal properties"
Anjos, V., M. J. V. Bell, Elder A. de Vasconcelos, E. F. da Silva Jr., A. A. Andrade, R. W. A. Franco, M. P. P. Castro, I. A. Esquef, and R. T. Faria Jr. "Thermal Lens Technique for the Determination of SiC Thermo-Optical Properties." In Silicon Carbide and Related Materials 2005, 703–6. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-425-1.703.
Повний текст джерелаCabrero, J., F. Audubert, P. Weisbecker, A. Kusiak, and R. Pailler. "Titanium Carbide and Silicon Carbide Thermal Conductivity Under Heavy Ions Irradiation." In Mechanical Properties and Performance of Engineering Ceramics and Composites IV, 205–17. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2009. http://dx.doi.org/10.1002/9780470584262.ch19.
Повний текст джерелаMatocha, Kevin, Chris S. Cowen, Richard Beaupre, and Jesse B. Tucker. "Effect of Reactive-Ion Etching on Thermal Oxide Properties on 4H-SiC." In Silicon Carbide and Related Materials 2005, 983–86. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-425-1.983.
Повний текст джерелаJiménez, J. A., Georg Frommeyer, M. López, N. Candela, and Oscar A. Ruano. "Mechanical Properties of Composite Materials Consisting of M3/2 High Speed Steel Reinforced with Niobium Carbides." In THERMEC 2006, 756–62. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.756.
Повний текст джерелаScafè, E., L. Di Rese, L. Fabbri, G. Dinelli, G. Giusto, and M. Tiengo. "Influence of Processing on Thermal and Elastic Properties in Alumina Silicon Carbide Whisker Composites (+)." In 4th International Symposium on Ceramic Materials and Components for Engines, 773–80. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2882-7_85.
Повний текст джерелаItatani, Kiyoshi, Ian J. Davies, and Hiroshi Suemasu. "Mechanical and Thermal Properties of Silicon Carbide Composites with Chopped Si-Al-C Fiber Addition." In SiAlONs and Non-oxides, 257–60. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908454-00-x.257.
Повний текст джерелаFroment, K., D. Gosset, M. Guéry, B. Kryger, and C. Verdeau. "Neutron irradiation effects in boron carbides: Evolution of microstructure and thermal properties." In Nuclear Materials for Fission Reactors, 185–88. Elsevier, 1992. http://dx.doi.org/10.1016/b978-0-444-89571-4.50027-x.
Повний текст джерелаKumar, Santosh, and Rakesh Kumar. "Recent Advances in Design and Fabrication of Wear Resistant Materials and Coatings." In Handbook of Research on Tribology in Coatings and Surface Treatment, 87–117. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-9683-8.ch005.
Повний текст джерелаMedri, Valentina, Diletta Sciti, and Elena Landi. "Production of UHTC Complex Shapes and Architectures." In MAX Phases and Ultra-High Temperature Ceramics for Extreme Environments, 246–77. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-4066-5.ch008.
Повний текст джерелаSilvestroni, Laura, and Diletta Sciti. "Effect of Transition Metal Silicides on Microstructure and Mechanical Properties of Ultra-High Temperature Ceramics." In MAX Phases and Ultra-High Temperature Ceramics for Extreme Environments, 125–79. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-4066-5.ch005.
Повний текст джерелаТези доповідей конференцій з теми "Carbides Thermal properties"
Türkes, P. R. H., E. T. Swartz, and R. O. Pohl. "Thermal properties of boron and boron carbides." In AIP Conference Proceedings Volume 140. AIP, 1986. http://dx.doi.org/10.1063/1.35611.
Повний текст джерелаVäisänen, M., P. Vuoristo, T. Mäntylä, V. Maunu, P. Lintunen, and P. Lintula. "Microstructure and Properties of TiC-CrNiMo SHS Spray Powder and Thermally Sprayed Coating." In ITSC 2000, edited by Christopher C. Berndt. ASM International, 2000. http://dx.doi.org/10.31399/asm.cp.itsc2000p0429.
Повний текст джерелаRincon Romero, A., A. Lynam, H. Memon, F. Venturi, and T. Hussain. "Development of Thermal Sprayed Silicon Carbide Coatings by an Innovative Suspension/Solution Precursors Approach." In ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0268.
Повний текст джерелаMagnani, M., P. H. Suegama, A. V. Benedetti, N. Espallargas, S. Dosta, and J. M. Guilemany. "The Application of Cr3C2-NiCr Coatings to Improve the Corrosion and Wear Properties of an AA7050 Alloy." In ITSC2008, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. http://dx.doi.org/10.31399/asm.cp.itsc2008p1356.
Повний текст джерелаStavros, A. J. "Surface Changes of Several Thermal Spray Coatings Abraded by a TiO2 Slurry." In ITSC2003, edited by Basil R. Marple and Christian Moreau. ASM International, 2003. http://dx.doi.org/10.31399/asm.cp.itsc2003p0411.
Повний текст джерелаSahu, Shreehard, Bikash Kumar, Siba Sundar Sahoo, Balila Nagamani Jaya, and Dheepa Srinivasan. "Thermal Stability of Additively Manufactured Mar M 509." In 2022 International Additive Manufacturing Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/iam2022-91410.
Повний текст джерелаLyphout, C., K. Sato, S. Houdkova, E. Smazalova, L. Lusvarghi, G. Bolelli, and P. Sassatelli. "Tribological Properties of Hard Metal Coatings Sprayed by High Velocity Air Fuel Process." In ITSC2015, edited by A. Agarwal, G. Bolelli, A. Concustell, Y. C. Lau, A. McDonald, F. L. Toma, E. Turunen, and C. A. Widener. ASM International, 2015. http://dx.doi.org/10.31399/asm.cp.itsc2015p0761.
Повний текст джерелаMelnyk, C., R. Gansert, D. Lajun, B. Weinstein, D. Grant, and M. Watson. "Investigation of Mechanical Properties of Coatings and Bulk Components of Various Grain Sized Tungsten-Carbide-Cobalt Based Materials." In ITSC2011, edited by B. R. Marple, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and A. McDonald. DVS Media GmbH, 2011. http://dx.doi.org/10.31399/asm.cp.itsc2011p0157.
Повний текст джерелаMedyanik, S. N., and N. Vlahopoulos. "Atomistic Simulation Studies of the Effects of Defects on Thermal Properties of Ultra High Temperature Ceramics." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65389.
Повний текст джерелаZimmermann, S., B. Gries, and J. Fischer. "New Health and Environment-Friendly Iron Based Materials Employed as Binders for Carbide Powders used in Thermal Spraying." In ITSC2008, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. http://dx.doi.org/10.31399/asm.cp.itsc2008p0965.
Повний текст джерела