Добірка наукової літератури з теми "Carbide plate"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Carbide plate".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Carbide plate"
Kong, Xiang Hua, Shuai Wang, Yan Hui Sun, Jian Liang Zhang, Xiang Li, Fa Cang Wang, and Jian Lin Geng. "Analysis of Carbide Precipitates in API X80 Medium-Thickness Plate." Advanced Materials Research 146-147 (October 2010): 301–5. http://dx.doi.org/10.4028/www.scientific.net/amr.146-147.301.
Повний текст джерелаPodhorná, Božena, Irena Andršová, Jana Dobrovská, Vlastimil Vodárek, and Karel Hrbáček. "Structure Stability of Ni-Base and Co-Base Alloys." Materials Science Forum 782 (April 2014): 431–36. http://dx.doi.org/10.4028/www.scientific.net/msf.782.431.
Повний текст джерелаOlena, Soroka, Rodichev Iuriy, Vorontsov Borys, and Protasov Roman. "Structural Strength of Cemented Carbides." Strojnícky časopis - Journal of Mechanical Engineering 71, no. 2 (November 1, 2021): 291–98. http://dx.doi.org/10.2478/scjme-2021-0035.
Повний текст джерелаGao, Zhi Guo, Hua Wang, Yan Qing Feng, and Yi Sheng Zhao. "Steel-Bonded Cemented Carbide Cladding Prepared by Technological Combination of Powder Explosive Compaction and Liquid Sintering." Advanced Materials Research 308-310 (August 2011): 947–52. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.947.
Повний текст джерелаRasoolpoor, M., R. Ansari, and MK Hassanzadeh-Aghdam. "Dynamic behavior of particulate metal matrix nanocomposite plates under low velocity impact." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234, no. 1 (September 17, 2019): 180–95. http://dx.doi.org/10.1177/0954406219875781.
Повний текст джерелаJeong, H. W., I. S. Kim, S. M. Seo, Y. S. Yoo, B. G. Choi, and C. Y. Jo. "Characterization of an anomaly in the crystallographic orientation of plate-like carbides precipitated in a wrought Ni-base superalloy." Journal of Applied Crystallography 45, no. 4 (July 14, 2012): 719–25. http://dx.doi.org/10.1107/s002188981202599x.
Повний текст джерелаSheleg, V. K., A. N. Jigalov, and D. D. Bogdan. "Study on Effect of Aerodynamic Sound Hardening for Wear of Coated Carbide Metal Plates." Science & Technique 19, no. 4 (August 5, 2020): 271–79. http://dx.doi.org/10.21122/2227-1031-2020-19-4-271-279.
Повний текст джерелаUeda, Keiji, Nobuyuki Ishikawa, and Yasuhiro Murota. "Influence of Matrix Structure and Hard Carbide on Abrasive Resistance of Steel Plates." Materials Science Forum 706-709 (January 2012): 2342–47. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.2342.
Повний текст джерелаBishutin, Sergey, and Sergey Alehin. "Technological mode choice for silicon carbide plate diamond abrasion." Science intensive technologies in mechanical engineering 2020, no. 12 (December 31, 2020): 3–6. http://dx.doi.org/10.30987/2223-4608-2020-12-3-6.
Повний текст джерелаKorobov, Yury, Yulia Khudorozhkova, Holger Hillig, Alexander Vopneruk, Aleksandr Kotelnikov, Sergey Burov, Prabu Balu, Alexey Makarov, and Alexey Chernov. "The Effect of Thickness on the Properties of Laser-Deposited NiBSi-WC Coating on a Cu-Cr-Zr Substrate." Photonics 6, no. 4 (December 13, 2019): 127. http://dx.doi.org/10.3390/photonics6040127.
Повний текст джерелаДисертації з теми "Carbide plate"
Barnes, Andrew Charles. "Characterization of High-Aspect Ratio, Thin Film Silicon Carbide Diaphragms Using Multimode, Resonance Frequency Analysis." Case Western Reserve University School of Graduate Studies / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=case1414844482.
Повний текст джерелаЧміль, Роман Євгенович. "Свердло з напайною твердосплавною пластиною". Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/26719.
Повний текст джерелаThe forms of the cutting parts of the spiral drills, which are used in modern mechanical engineering, are considered. The changes of the front, rear angles and the thickness of the cutting layer, for drills with a radius shape of the cutting part and the drill with an angle with the apex along the cutting edge. It is established that the drill with a radius shape of the cutting part with a radius at an apex of 8 mm has the most favorable geometric parameters. A technological tool for manufacturing a drill with optimization of its production has been developed. A startup project of the idea of this drill was developed
Martin, Samuel R. "Experimental Characterization of the Effect of Microstructure on the Dynamic Behavior of SiC." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5024.
Повний текст джерелаLeray, Cedric. "Etude du comportement thermique et thermomécanique des récepteurs solaires sous haut flux radiatif." Thesis, Perpignan, 2017. http://www.theses.fr/2017PERP0003/document.
Повний текст джерелаFor the future, using thermodynamical solar power plant seems to be a good solution to ensure electrical production. Solar tower plants are able to produce electricity in significant amount, are environmentally friendly and economically competitive. One way to increase the yield of these plants is using high efficiency thermodynamical cycles, like combined cycle. That requires to providing a working fluid at high temperature and high pressure (10bar and 1000°C at least). This PHD thesis presents the works performed to develop and enhance a concept of modular plate solar ceramic absorber that can ensure the required air production. We chose the silicon carbide as material due to its resistance to high temperatures and oxidation problems. The drawback is ceramic modules are weak to traction stresses. The study focuses on the knowledge and the control of this phenomenon. This work combines the developments of numerical tools and experimental studies performed at Thémis power plant (Targassonne, 66, FRANCE). The numerical method permits simulations to predict the thermal behavior and the mechanical behavior of a solar module absorber. It allows the reduction of the mechanical stresses undergone by solar receiver and the prediction of its performances. This methodology was tested using experimental results
Таран, Євгеній Сергійович. "Оправка розточна збірна". Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2019. https://ela.kpi.ua/handle/123456789/31456.
Повний текст джерелаThe purpose of the diploma project is the design of the mandrel of the blade assembly, which is used for the treatment of internal and external cylindrical surfaces, drilling a hole, rolling the grooves and triming the ends. This tool is equipped with replaceable carbide plates, which are securely mounted in the tool casing. The structure of the tools for processing various types of surfaces was also analyzed, a working drawing and a 3D model of the tool were created, a production technology was developed and cutting patterns were calculated, a technological device for milling the landing surfaces under a solid alloy plate was selected and calculated, the control program for the CNC machine and visualization of the processing process are presented.
Brun, François. "Modélisation du fonctionnement de la plante Arabidopsis thaliana dans différents contextes de disponibilité en N du sol : impact sur l'architecture racinaire." Paris 11, 2006. http://www.theses.fr/2006PA112256.
Повний текст джерелаA nitrogen limitation causes important effects on the development and the growth of the plant that presents an adaptative response under such conditions. The plasticity of the root system is an essential element of this response. The objective of this study was to analyze the response of the root system to a nitrogen limitation by trying to take into account the whole plant functioning. We chose a modelling approach to simulate the whole plant functioning in Arabidopsis thaliana with a detailed description of the morphogenetic processes of the root system under contrasted nitrogen conditions. Experiments were carried out under cross conditions carbon and nitrogen nutritions to specify these effects on the root system architecture and to collect data for our modelling approach of the whole plant. Most of our study is on one genotype, the ecotype Wassilewskija (Ws-0), and proposes an analysis framework for future studies on genetic variability
Larue, Camille. "Impact de nanoparticules de TiO2 et de nanotubes de carbone sur les végétaux." Phd thesis, AgroParisTech, 2011. http://pastel.archives-ouvertes.fr/pastel-00765312.
Повний текст джерелаPellan, Maxime. "Développement des joints de grain et des joints de phase dans les carbures cémentés WC-CO." Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAI121/document.
Повний текст джерелаWC-Co cemented carbide is a two phase system constituted of a cobalt based binder matrix embedding hard tungsten carbide grains. This material is especially used in fields such as metal cutting or mining, where high mechanical properties are required. Therefore, the microstructure is a key parameter to control to optimize the mechanical properties of the alloy.This work aims at understanding the mechanisms of grain boundary and phase boundary development during sintering, and how they may influence the final microstructure. The effect of the binder content, carbon content and sintering time was especially investigated.Electron BackScattered Diffraction characterization was chosen to conduct this study. First because the precise separation of grains in the resulting images makes possible automation of the measurements, and thus allows a statistical analysis of several microstructural parameters (as grain size, contiguity) on numerous samples. Secondly because orientation data collected by this way make possible the analysis of grain boundary and phase boundary texture. To this end, an automated method was developed for analysis of grain boundaries and estimation of remarkable boundary planes fraction from 2D EBSD measurements.The study of contiguity shows that it does not depend on sintering time or carbon content in the binder, but essentially of the carbide grain volume fraction. This result implies that impingement is the first order parameter in the evolution of contiguity. Grains appear to grow faster and in a larger extent in samples with a carbon rich binder, as well as in high binder content samples. Abnormal grain growth seems to be favored by high binder content in carbon rich samples. All grain boundaries were characterized by a couple of rotation axis and misorientation angle. Three particular rotation axes were identified: [101 ̅0], [21 ̅1 ̅0] and [0001]. They represent around 30% of the total grain boundary surface area. In addition, specific rotations were found to be particularly abundant in the microstructure: [101 ̅0]/90°, [21 ̅1 ̅0] / (48°- 60°- 90°) and [0001]/90°.A study of their geometry suggests that their stability would be due to a particularly coherent boundary plane. A statistical analysis shows that most grain boundaries and phase boundaries have a habit plane parallel to a basal or prismatic plane (about 70% of the total grain boundary surface area and 50% of the total phase boundary area. Finally, a scenario is proposed for the microstructure development model during sintering of cemented carbides on the basis of the results
Kohler, Caroline. "Fonctionnement des communautés végétales et stocks de carbone en prairies bas-normandes." Caen, 2015. http://www.theses.fr/2015CAEN2073.
Повний текст джерелаGrasslands are recognized for their high potential to mitigate the increase in atmospheric CO2 concentrations through carbon (C) storage in soils. At the interface between the soil and the atmosphere, plant communities constitute a key component driving C inputs and C outputs in the ecosystem. This work aims to determine the impact of the functional composition of plant communities on C stocks and C distribution in grasslands, and to assess the underlying mechanisms. We studied in situ the C stocks in the plant-soil system of seven grasslands in an experimental farm in Normandy, and characterized the functional composition of the plant communities. This study shows that the functioning of plant communities affects soil C stocks. The LDMC (leaf dry matter content) community-weighted mean trait, proved to be the best indicator of soil C stocks. Overall, the results highlight the importance of the grassland age: the oldest and least productive grasslands have a higher soil C stock than the most recent and productive ones. The oldest grasslands are also characterized by a high root C amount, which is positively correlated with the soil organic C stock. The positive correlation between the stubble carbohydrate contents and the soluble soil C contents in spring suggests an impact of root carbohydrate exudation on the quality of soil organic matter and soil microbes C. Overall, our results highlight the need for a compromise between forage production and soil C storage
Razakamanarivo, Ramarson Herintsitohaina. "Potentialités de stockage du carbone dans le système plante-sol des plantations d'eucalyptus des hautes terres malgaches." Montpellier SupAgro, 2009. http://www.theses.fr/2009NSAM0028.
Повний текст джерелаКниги з теми "Carbide plate"
P, Bansal Narottam, and NASA Glenn Research Center, eds. In-plane and interlaminar shear strength of a unidirectional hi-nicalon fiber-reinforced celsian matrix composite. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.
Знайти повний текст джерелаP, Bansal Narottam, and NASA Glenn Research Center, eds. In-plane and interlaminar shear strength of a unidirectional hi-nicalon fiber-reinforced celsian matrix composite. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.
Знайти повний текст джерелаP, Bansal Narottam, and NASA Glenn Research Center, eds. In-plane and interlaminar shear strength of a unidirectional hi-nicalon fiber-reinforced celsian matrix composite. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.
Знайти повний текст джерелаP, Bansal Narottam, and NASA Glenn Research Center, eds. In-plane and interlaminar shear strength of a unidirectional hi-nicalon fiber-reinforced celsian matrix composite. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.
Знайти повний текст джерелаParker, Philip M. The World Market for Unmounted Tool Plates, Sticks, and Tips of Sintered Metal Carbides or Cermets: A 2007 Global Trade Perspective. ICON Group International, Inc., 2006.
Знайти повний текст джерелаParker, Philip M. The 2007 Import and Export Market for Unmounted Tool Plates, Sticks, and Tips of Sintered Metal Carbides or Cermets in China. ICON Group International, Inc., 2006.
Знайти повний текст джерелаThe World Market for Unmounted Tool Plates, Sticks, and Tips of Sintered Metal Carbides or Cermets: A 2004 Global Trade Perspective. Icon Group International, Inc., 2005.
Знайти повний текст джерелаЧастини книг з теми "Carbide plate"
Brezeanu, M., M. Badila, G. Brezeanu, F. Udrea, C. Boianceanu, G. Amaratunga, and K. Zekentes. "Theoretical Study of an Effective Field Plate Termination for SiC Devices Based on High-k Dielectrics." In Silicon Carbide and Related Materials 2005, 1087–90. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-425-1.1087.
Повний текст джерелаKumta, A., E. Rusli, and Chin Che Tin. "Design and Analysis of a Dual-Step Field-Plate Terminated 4H-SiC Schottky Diode Using SiO2/High-K Dielectric Stack." In Silicon Carbide and Related Materials 2005, 1171–74. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-425-1.1171.
Повний текст джерелаZuanetti, Bryan, Tianxue Wang, and Vikas Prakash. "Dynamic Failure of Pure Tungsten Carbide Under Simultaneous Compression and Shear Plate Impact Loading." In Dynamic Behavior of Materials, Volume 1, 163–70. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30021-0_28.
Повний текст джерелаJayaraj, Jayamani, Jae Ho Han, Sang Whan Park, Ki Bae Kim, and Eric Fleury. "Potential of Cr2AlC Ternary Carbide as Material for Bipolar Plate in PEMFC." In Solid State Phenomena, 927–30. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/3-908451-31-0.927.
Повний текст джерелаStarke, Ulrich. "Non-Basal Plane SiC Surfaces: Anisotropic Structures and Low-Dimensional Electron Systems." In Silicon Carbide, 375–94. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2011. http://dx.doi.org/10.1002/9783527629053.ch15.
Повний текст джерелаEpelbaum, Boris M., Octavian Filip, and Albrecht Winnacker. "Bulk and Epitaxial Growth of Micropipe-Free Silicon Carbide on Basal and Rhombohedral Plane Seeds." In Silicon Carbide, 33–61. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2011. http://dx.doi.org/10.1002/9783527629053.ch2.
Повний текст джерелаZhang, Ze Hong, and Tangali S. Sudarshan. "Growth of Low Basal Plane Dislocation Density SiC Epitaxial Layers." In Silicon Carbide and Related Materials 2005, 243–46. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-425-1.243.
Повний текст джерелаZhang, Ze Hong, A. E. Grekov, Priyamvada Sadagopan, S. I. Maximenko, and Tangali S. Sudarshan. "Performance of Silicon Carbide PiN Diodes Fabricated on Basal Plane Dislocation-Free Epilayers." In Silicon Carbide and Related Materials 2005, 371–74. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-425-1.371.
Повний текст джерелаAgarwal, Anant, Sumi Krishnaswami, James Richmond, Craig Capell, Sei Hyung Ryu, John Palmour, Bruce Geil, Dimos Katsis, Charles J. Scozzie, and Robert E. Stahlbush. "Influence of Basal Plane Dislocation Induced Stacking Faults on the Current Gain in SiC BJTs." In Silicon Carbide and Related Materials 2005, 1409–12. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-425-1.1409.
Повний текст джерелаZhang, Ze Hong, A. Shrivastava, and Tangali S. Sudarshan. "Why Are Only Some Basal Plane Dislocations Converted to Threading Edge Dislocations During SiC Epitaxy?" In Silicon Carbide and Related Materials 2005, 419–22. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-425-1.419.
Повний текст джерелаТези доповідей конференцій з теми "Carbide plate"
Holmquist, T. J., and T. J. Vogler. "The response of silicon carbide and boron carbide subjected to shock-release-reshock plate-impact experiments." In DYMAT 2009 - 9th International Conferences on the Mechanical and Physical Behaviour of Materials under Dynamic Loading. Les Ulis, France: EDP Sciences, 2009. http://dx.doi.org/10.1051/dymat/2009016.
Повний текст джерелаBishutin, Sergey, and Sergey Alehin. "TRIBOLOGICAL ASPECTS OF DIAMOND-ABRASIVE PROCESSING OF SILICON CARBIDE PLATES." In PROBLEMS OF APPLIED MECHANICS. Bryansk State Technical University, 2020. http://dx.doi.org/10.30987/conferencearticle_5fd1ed047fb069.67714622.
Повний текст джерелаGlaeser, Thorsten, Axel Demmer, and Fritz Klocke. "Liquid-Phase Sintering of Tungsten Carbide-Cobalt by Laser Radiation." In ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2008. http://dx.doi.org/10.1115/esda2008-59534.
Повний текст джерелаYatsko, D. S., I. G. Zhevtun, D. S. Pivovarov, and O. V. Dudko. "Investigation for interaction of laser radiation with a titanium plate on adding of titanium carbide powder." In HIGH-ENERGY PROCESSES IN CONDENSED MATTER (HEPCM 2019): Proceedings of the XXVI Conference on High-Energy Processes in Condensed Matter, dedicated to the 150th anniversary of the birth of S.A. Chaplygin. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5117455.
Повний текст джерелаSathish, T., D. Bala Subramanian, R. Saravanan, and V. Dhinakaran. "Experimental investigation of temperature variation on flat plate collector by using silicon carbide as a nanofluid." In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0024965.
Повний текст джерелаTonge, Andrew L., and Brian E. Schuster. "The Role of Inclusions in the Failure of Boron Carbide Subjected to Impact Loading." In 2019 15th Hypervelocity Impact Symposium. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/hvis2019-056.
Повний текст джерелаBeal, Aaron, Dave Dae-Wook Kim, Kyung-Hee Park, and Patrick Kwon. "A Comparative Study of Carbide Tools in Drilling of CFRP and CFRP-Ti Stacks." In ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50114.
Повний текст джерелаNandhakumar, S., P. P. Sethusundaram, and G. N. Ganeshan. "Numerical analysis of composite layered ballistic plate made of boron carbide, titanium diboride and ultra high molecular weight polyethylene." In INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND MACHINING 2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5117967.
Повний текст джерелаBhunia, Avijit, and Chung-Lung Chen. "Closed Loop Impingement Cooling System for High Power Density Electronic Devices." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33729.
Повний текст джерелаSalem, Jonathan A., Noel N. Nemeth, Lynn M. Powers, and Sung R. Choi. "Reliability Analysis of Uniaxially Ground Brittle Materials." In ASME 1995 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/95-gt-031.
Повний текст джерелаЗвіти організацій з теми "Carbide plate"
Triola, Christopher, Candace Joggerst, Ching-Fong Chen, Timothy Foley, and David Jablonski. Simulations of Sweeping Wave Propagation in a Boron Carbide Plate. Office of Scientific and Technical Information (OSTI), November 2020. http://dx.doi.org/10.2172/1711337.
Повний текст джерела