Книги з теми "Buildings Thermal properties Testing"

Krause, Henryk. Podstawy temperaturowej diagnostyki izolacyjności cieplnej przegród budowlanych. Gliwice: Politechnika Śląska, 1993.

I͡Alyshev, F. Kh. Opticheskie metody kontroli͡a zdaniĭ i sooruzheniĭ: Kontrolʹ kachestva teplozashchity. Leningrad: Stroĭizdat, Leningradskoe otd-nie, 1988.

Baverstock, G. F. The effect of thermal mass of a structure in energy efficient commercial (air conditioned) buildings. Perth, W.A: Minerals and Energy Research Institute of Western Australia, 1994.

Karagiozis, Achilles N. Analysis of the hygrothermal behavior of residential high-rise building components. [Ottawa]: The Corporation, 1997.

Wróbel, Alina. Termografia w pomiarach inwentaryzacyjnych obiektów budowlanych. Kraków: Wydawnictwa AGH, 2010.

Hwang, Yunho. Testing of refrigerant mixtures in residential heat pumps. Washington, D.C: The Office, 1995.

Issa, Mohsen A. Evaluation of Washington Hydraulic Fracture Test (SHRP) for D-cracking aggregate: Final report. Edwardsville, Ill.]: Illinois Transportation Research Center, Illinois Dept. of Transportation, 1999.

1954-, Rubio Antonio, ed. Thermal testing of integrated circuits. Boston: Kluwer Academic Publishers, 2002.

Thermal analysis of materials. New York: Marcel Dekker, 1994.

V, Kononovich I͡U. Teplovoĭ rezhim zdaniĭ massovoĭ zastroĭki. Moskva: Stroĭizdat, 1986.

Oettinger, Frank F. Thermal resistance measurements. Gaithersburg, MD: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1990.

Oettinger, Frank F. Thermal resistance measurements. Gaithersburg, MD: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1990.

Hughes, D. F. Insulation of farm buildings. Alnwick, Northumberland: Ministry of Agriculture, Fisheries andFood, 1986.

A, Tabunschikov I͡U. Mathematical models of thermal conditions in buildings. Boca Raton: CRC Press, 1992.

Fanchiotti, A. Guida alla strumentazione per l'edilizia dimostrativa. [Roma]: Comitato nazionale per la ricerca e per lo sviluppo dell'energia nucleare e delle energie alternative, 1989.

Horn, Thomas J. A technique for transient thermal testing of thick structures. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1997.

M, Steen, and Lohr R. D, eds. Ultra high temperature mechanical testing. Cambridge: Woodhead, 1995.

Andreica, Horia A. Termoizolații neconvenționale. Cluj-Napoca: Editura U.T. Pres, 1996.

Jenkins, Michael G., Edgar Lara-Curzio, and Stephen T. Gonczy. Mechanical, thermal, and environmental testing and performance of ceramic composites and components. West Conshohocken, PA: ASTM, 2000.

Kanarchuk, Vadim Evgenʹevich. Beskontaktnai͡a︡ teplovai͡a︡ diagnostika mashin. Moskva: "Mashinostroenie", 1987.

McKeen, Laurence W. The effect of creep and other time related factors on plastics and elastomers. 2nd ed. Norwich, N.Y: W. Andrew, 2009.

The effect of temperature and other factors on plastics and elastomers. 2nd ed. Norwich, NY: Plastics Design Library/William Andrew, 2008.

American, Society of Heating Refrigerating and Air-Conditioning Engineers. Method of testing liquid-chilling packages. Atlanta, Ga: American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1995.

M, Hart J. A practical guide to infra-red thermography for building surveys. Watford: Building Research Establishment, 1991.

Koczyk, Halina. Analiza stanów termicznych budynków na potrzeby ogrzewań energooszczędnych. Poznań: Wydawn. Politechniki Poznańskiej, 1990.

M, Crean G., Locatelli M, McGilp J, and European Materials Research Society, eds. Acoustic, thermal wave, and optical characterization of materials: Proceedings of Symposium C on Acoustic, Thermal Wave, and Optical Characterization of Materials of the 1989 E-MRS Conference, Strasbourg, France, 30 May-2 June 1989. Amsterdam: North-Holland, 1990.

Humphreys, Michael A. (Michael Alexander), 1936- and Roaf Susan, eds. Adaptive thermal comfort: Principles and practice. Abingdon, Oxon [England]: Earthscan, 2012.

T, Muneer, ed. Windows in buildings: Thermal, acoustic, visual, and solar performance. Oxford: Architectural Press, 2000.

McCartney, John Scott. Thermoactive foundations for sustainable buildings. New York: ASME Press, 2015.

National Heat Transfer Conference (23rd 1985 Denver, Colo.). Heat transfer in buildings and structures: Presented at the 23rd National Heat Transfer Conference, Denver, Colorado, August 4-7, 1985. New York, N.Y. (345 E. 47th St., New York 10017): American Society of Mechanical Engineers, 1985.

National Heat Transfer Conference (24th 1987 Pittsburgh, Pa.). Heat transfer in buildings and structures: Presented at the 24th National Heat Transfer Conference and Exhibition, Pittsburgh, Pennsylvania, August 9-12, 1987. New York, N.Y. (345 E. 47th St., New York 10017): American Society of Mechanical Engineers, 1987.

Energii︠a︡ v sgradnata obvivka. Sofii︠a︡: Akademichno izdatelstvo "Prof. Marin Drinov", 2011.

ASHRAE/DOE/BTECC Conference (1992 Clearwater Beach, Fla.). Thermal performance of the exterior envelopes of buildings V: Proceedings of the ASHRAE/DOE/BTECC Conference, December 7-10, 1992, Clearwater Beach, Florida. Atlanta, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1992.

Lennart, Sjöberg, Hallberg Rolf O, and Statens råd för byggnadsforskning (Sweden), eds. Leaching of rock fractures: Laboratory and field tests for borehole heat stores. Stockholm, Sweden: Swedish Council for Building Research, 1988.

Kubičár, L̕udovít. Rýchla metóda merania základných termofyzikálnych parametrov. Bratislava: Veda, 1988.

McCabe, M. E. Interim procedure to measure the thermal performance of window systems: M.E. McCabe, W.P. Goss. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1987.

Smith, Dane. Materials testing on the DC-X and DC-XA. [Moffet Field, Calif: NASA Ames Research Center], 1997.

Limited, Enermodal Engineering. Window and door thermal performance requirements in Canadian building codes. Ottawa: Dept. of Natural Resources Canada, CANMET, Efficiency & Alternative Energy Technology Branch, Energy Efficiency Division, 1994.

A, Humphreys M., and Building Research Establishment, eds. Trends in thermal comfort research. Watford: Building Research Establishment, 1994.

Menard, Kevin P. Dynamic Mechanical Analysis. London: Taylor and Francis, 2008.

Thermal certification tests of Orbiter Thermal Protection System tiles coated with KSC coating slurries. Houston, Texas: National Aeronautics and Space Administration, Lyndon B. Johnson Space Center, 1993.

Reiterman, Pavel, Eva Vejmelková, and Jan Zatloukal. Mechanical, Thermal and Hygric Properties of Buildings Materials. Trans Tech Publications, Limited, 2014.

Wix, J. Dynamic Thermal Modelling. Hyperion Books, 1987.

Jeffrey, Wix, and Building Services Research and Information Association. Computer Centre., eds. Dynamic thermal modelling. Lutterworth, UK: Ambient Press, 1987.

Green, Don W., and G. Paul Willhite. Enhanced Oil Recovery. Society of Petroleum EngineersRichardson, Texas, USA, 2018. http://dx.doi.org/10.2118/9781613994948.

Struktura i prochnostʹ materialov v shirokom diapazone temperatur. Moskva: Mezhdunar. t͡s︡entr nauch. i tekhn. informat͡s︡ii, In-t mashinovedenii͡a︡ im. A.A. Blagonravova AN SSSR, 1991.

Thermal Analysis Of Plastics: Theory and Practice. Hanser Gardner Publications, 2004.

Ehrenstein, Gottfried Wilhelm, Gabriela Riedel, and Pia Trawiel. Thermal Analysis of Plastics: Theory and Practice. Hanser GmbH & Company, Carl, 2004.

Nicol, Fergus, Susan Roaf, and Michael Humphreys. Adaptive Thermal Comfort: The Designer's Guide to Adaptive Thermal Comfort. Taylor & Francis Group, 2019.

Humphreys, M., F. Nicol, S. Roaf, and O. Sykes. Standards for Thermal Comfort. Taylor & Francis Group, 2019.