Дисертації з теми "Building performance gap"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-18 дисертацій для дослідження на тему "Building performance gap".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Sun, Yuming. "Closing the building energy performance gap by improving our predictions." Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/52285.
Повний текст джерелаWang, Yijia. "HVAC operation uncertainty in energy performance gap." Thesis, Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/53858.
Повний текст джерелаEriksson, Linnea. "The impact of calculation methods on the gap between predicted and actual energy performance of buildings : Using a thermal simulation model of a building." Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-33225.
Повний текст джерелаByggnadssektorn är ansvarig för nästan en fjärdedel av de totala globala koldioxidutsläppen. Viljan att minska utsläppen kan ses i de allt striktare riktlinjer som sätts över hela världen. För att reducera utsläppen finns det två sätt: bygga nya energieffektiva byggnader eller ombyggnation av nuvarande byggnader. Livslängden på nuvarande byggnadsbestånd innebär att de största besparingarna innan 2030 kommer att ske inom ombyggnationer. För detta krävs tillförlitliga verktyg, och i nuläget finns det ett gap mellan byggnaders förutspådda och verkliga energiprestanda. I denna examensuppsatts kommer beräkningsmetodens inflytande över detta gap att undersökas. En byggnad på RMIT:s campus i Melbourne, Australien, som kommer att undergå en ombyggnation som designats av Siemens har använts. En termisk simuleringsmodell av byggnaden skapades och avstämdes mot den verkliga byggnaden, och jämfördes mot uppmätta värden av byggnadens energiprestanda. Ombyggnationerna var sedan implementerade och skillnaden mellan den förutspådda prestandan av byggnaden, genom den omfattande simuleringsmodellen och den enklare beräkningsmetoden som användes av Siemens, jämfördes. Genom att analysera gapet mellan de olika beräkningsmetoderna kunde slutsatser dras angående hur de kan bidra till gapet i energiprestanda. Slutsatserna från arbetet är att simuleringsmodellen ger en bra bild av energianvändningen av byggnaden, med hänsyn till informationen som varit tillänglig. Byggnadens totala uppmätta elektricitetsanvändning är speciellt väl överrensstämmande med simuleringsmodellens resultat både i den årliga användningen, ca 4 % skillnad från uppmätta värden, och variationen över ett år. Den totala användningen av naturgas enligt simuleringsmodellen är under de uppmätta värdena med en skillnad på ca 40 %, men med en god överrensstämmelse med den årliga variationen. Användningen av elektricitet i modellen är relativt stabil, användningen av naturgas är känslig för direkta ändringar till uppvärmningssystemet. Inputparametrarna som har störst inverkan på elanvändningen är interna, energiproducerande och konsumerande, enheters användningsprofil (PC, personer, ljus m.m.), el konsumtion, och latenta samt sensibla värme. Siemens beräkningsmetod bidrar till gapet mellan förutspådda och verkliga energiprestanda genom brist på samverkan mellan de olika delarna i ombyggnationen. Ombyggnationen som innebär uppgradering av byggnadens belysning innebär exempelvis märkbara skillnader i byggnadens uppvärmnings- och kylsystem. Användningen av endast en period i skapandet av regressionsmodeller för att förutspå vattenkokarnas och kylarnas användning leder även till en missledande framtida energiproduktion. Styrkan i simuleringsmodellen är möjligheten till samverkan mellan olika ombyggnationer påverkan på varandra samt möjligheten till scenarioanalys.
Doylend, Nicholas. "Evaluating building energy performance : a lifecycle risk management methodology." Thesis, Loughborough University, 2015. https://dspace.lboro.ac.uk/2134/18022.
Повний текст джерелаWhite, Jennifer A. "An investigation into the parameters that contribute to the gap between the designed and as-built thermal performance of British housing." Thesis, University of Nottingham, 2014. http://eprints.nottingham.ac.uk/14408/.
Повний текст джерелаLane, Anna-Lena. "Building-related renewable electricity production with storage and energy-efficient buildings : Exploring barriers, drivers and quality assurance." Licentiate thesis, Högskolan i Gävle, Energisystem och byggnadsteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-33402.
Повний текст джерелаFör att uppnå klimatmålen är det nödvändigt att minska den ohållbara användningen av fossila bränslen. Ett sätt är att öka användning av förnybar energi genom att kombinera solel med batterilager. Ett annat sätt är att öka medvetenheten om energianvändningen med dess negativa påverkan på miljön och uppfylla energikraven för nya byggnader bättre. Eftersom byggnader har lång livslängd ger onödigt hög energianvändning påverkan under lång tid. Hinder, drivkrafter och andra icke energirelaterade fördelar med att investera i batterilager till solel har undersökts i en enkätstudie bland svenska lantbruk. Det kom in 100 svar från lantbrukare som har solel, vilket motsvarar en svarsfrekvens på 59 %. Den viktigaste drivkraften för att investera i batterilager till solelanläggningen är en högre egenanvändning av el. Detta visade sig också vara högst prioriterat av elnätsägare för att minska behovet av kostsamma investeringar i elnätet. Den största icke energirelaterade fördelen med batterilager är större oberoende av elnätet. En kvalitetsäkringsmetod för byggprocessen har utvecklats och beskrivits. Syftet med metoden, som kallas ByggaE, är att minska skillnaden mellan verklig energianvändning och energikrav i nya byggnader. Metoden bygger på två huvudprocesser med aktiviteter. Beställarens huvudprocess är att formulera krav och metoder att kontrollera och följa upp dessa krav. De andra aktörernas huvudprocess är att identifiera, hantera och följa upp risker eller kritiska moment som kan påverka energianvändningen. Dokument som stödjer aktiviteterna lagras i en digital mappstruktur. Det är viktigt med realistiska antaganden och uppföljning som relaterar till dessa antaganden för att fler lönsamma energieffektiviseringsåtgärder ska bli genomförda och för att de energiprestanda som krävs eller förväntas ska bli uppfyllda.
Chu, Anne-Mareike. "Understanding the performance gap : an evaluation of the energy efficiency of three high-performance buildings in British Columbia." Thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/57734.
Повний текст джерелаScience, Faculty of
Resources, Environment and Sustainability (IRES), Institute for
Graduate
Gaspar, i. Fàbregas Kàtia. "Impact assessment of the façades' actual state on the energy performance gap of residential buildings." Doctoral thesis, Universitat Politècnica de Catalunya, 2018. http://hdl.handle.net/10803/669241.
Повний текст джерелаReduir la diferència entre el rendiment energètic previst i real dels edificis és necessari per tal d’augmentar el rendiment energètic dels edificis existents i assolir els objectius sobre eficiència energètica de la Unió Europea en el “Marc sobre clima i energia per al 2030”. La construcció és considerada el sector amb més potencial d'estalvi energètic. Concretament, el condicionament tèrmic dels edificis mitjançant calefacció té un potencial d'estalvi energètic considerable. La transmitància tèrmica és el paràmetre fonamental per caracteritzar les pèrdues de calor a través de les envolvents de l’edifici. Tanmateix, diversos investigadors han demostrat que les hipòtesis sobre la pèrdua de calor dels edificis abans i després d’una rehabilitació no són correctes. En aquest sentit, es fa necessari realitzar mesures in situ amb elevada precisió per proporcionar informació sobre la transmitància tèrmica real de les façanes. El propòsit d’aquesta tesi és contribuir a reduir la bretxa del rendiment energètic en els edificis residencials. Per això, l'objectiu d'aquesta dissertació és millorar la precisió en la realització de mesures in situ de la transmitància tèrmica real de les façanes dels edificis residencials existents usant el mètode estandarditzat del mesurador de flux de calor (HFM), per assegurar l'èxit en la presa de decisions durant els processos de renovació energètica dels edificis existents i confirmar estratègies d'eficiència energètica per a nous edificis de consum d’energia quasi nul. L'anàlisi dels paràmetres d’assaig per a la mesura in situ de la transmitància tèrmica no està totalment especificada en l'estàndard ISO utilitzat extensivament. Pel que fa als procediments de càlcul, el mètode que s’utilitza de forma més àmplia pels investigadors és el mètode de mitjanes. Poques iniciatives utilitzen el mètode dinàmic degut a la seva complexitat. La investigació avalua les implicacions d'utilitzar els diferents mètodes de càlcul estandarditzats per verificar quin s’ajusta millor als valors teòrics de referència. A més, es fomenta i facilita la usabilitat del mètode dinàmic estandarditzat mitjançant un procediment de càlcul, definint un full de càlcul programat accessible per als professionals. La dissertació proposa un sistema de classificació de façanes per facilitar la selecció de façanes per a la seva posterior anàlisi del rendiment tèrmic de les façanes del sector de l'habitatge. La classificació de façanes d'edificis residencials existents es basa en la caracterització de la part opaca de les façanes. La dissertació continua explorant els límits dels requisits per a la utilització del mètode HFM per a refinar les condicions d’assaig en les façanes amb baixa transmitància tèrmica. Aquestes façanes es promouen cada vegada més per tal de complir amb els objectius de la Directiva 2010/31/CE. Tot i així, diversos investigadors han demostrat que realitzar mesures in situ precises en aquest tipus de façanes és un repte. Investigar els límits d'aplicació del mètode HFM per a la mesura in situ de la transmitància tèrmica en façanes amb baixa transmitància tèrmica permetrà assegurar el compliment de les polítiques de transició d'edificis existents a edificis de consum energètic quasi nul (nZEB), i confirmar estratègies d'eficiència energètica per a nous edificis nZEB. Per millorar la usabilitat del mètode HFM, aquesta tesi analitza diferents criteris per a determinar les condicions d’aturada de l’assaig durant les campanyes experimentals per mesurar in situ la transmitància tèrmica de les façanes. Els resultats ajudaran a reduir la incertesa sobre la durada de les campanyes experimentals per obtenir una transmitància tèrmica real precisa de les façanes dels edificis existents. La tesi conclou resumint les principals aportacions d'aquesta investigació. Els temes que s’han plantejat durant la investigació realitzada, i que no s'ha pogut abordar, es comenten i es proposen com a línies de treball futures
Tejedor, Herrán Blanca. "Contributions to the determination of thermal behaviour of façades using quantitative internal IRT (Infrared Thermography)." Doctoral thesis, Universitat Politècnica de Catalunya, 2019. http://hdl.handle.net/10803/665319.
Повний текст джерелаDins el Marc Europeu, la majoria dels edificis residencials no satisfan les especificacions tèrmiques mínimes. De fet, la taxa de renovació a Europa és estimada en 1% anual. Per complir amb els objectius de les Directives Europees 2010/31/UE i 2012/27/UE, és necessari assegurar una bretxa energètica mínima. A partir d'un estat de l'art exhaustiu, es va detectar que el comportament tèrmic d'un edifici sovint és subestimat o negligit durant les etapes de construcció i operació. Per aquest motiu, una prova no destructiva i precisa hauria de ser requerida, per tal de millorar les deficiències donades per les actuals eines de modelització i diagnosi d'edificis. El propòsit de la tesi era desenvolupar un mètode per determinar in-situ el comportament tèrmic de les façanes sota condicions estacionàries mitjançant la termografia quantitativa interna (IRT). Després d'elaborar un model numèric per estimar la transmitància tèrmica (U-value) com a paràmetre clau de la qualitat construïda, la dissertació va continuar amb un procés de validació executat en dues parets típiques espanyoles de diferents períodes de construcció. Això va permetre: (i) refinar el mètode proposat; (ii) explorar les condicions de contorn; (iii) avaluar la influència dels valors tabulats establerts per les normatives internacionals per l'emissivitat de la paret i els coeficients de transferència de calor per convecció. Els resultats van revelar baixes desviacions respecte als valors teòrics de transmitància tèrmica (1.24 a 3.97%) per duracions de test entre 2 i 3 hores. A més a més, els resultats van demostrar que l’ús de valors tabulats podria implicar altes desviacions (40%) en parets compostes. En general, els projectes de construcció d'edificis existents antics no estan disponibles. Per tant, aquest mètode podria proporcionar informació sobre la façana per futures rehabilitacions. En el cas d’edificis nous, el mètode podria permetre verificar el comportament tèrmic de les parets d’acord amb els paràmetres de disseny. Malgrat això, una revisió bibliogràfica posterior va posar de manifest que encara hi ha una bretxa en la estandardització d’aquest mètode per la diagnosi in-situ. Considerant aquest aspecte, es van desenvolupar tres estudis per tal de millorar l’aplicabilitat de la termografia quantitativa interna dins el camp de la indústria de la construcció. En primer lloc, es va analitzar la influència de les condicions operatives en la determinació de la transmitància tèrmica mesurada a través duna cambra experimental amb una façana simple sota un ampli rang de diferència de temperatura (3.8 < DT < 21ºC). En segon lloc, es van dur a terme tests en un parc d’habitatges públics constituïts per quatre pisos desocupats (sense sistemes elèctrics ni de calefacció en funcionament), amb la finalitat d’analitzar la influència de les propietats termofísiques no transitòries (ex. la capacitat de calor per unitat d’àrea) en la precisió del mètode. En tercer lloc, es va proposar i validar un mètode de processat de dades basat en l’anàlisi de sèries de temps de la U-value mitjançant sis parets compostes. L’objectiu era trobar un criteri comú per aturar la prova quan no són necessàries més dades per obtenir un resultat fiable. Havent investigat els aspectes mencionats anteriorment, es pot extrapolar que: (i) el gradient de temperatura òptim es troba entre 7 i 16ºC; (ii) la variància en la transmitància tèrmica podria ser principalment atribuïda a canvis en la temperatura ambient de l’aire exterior; (iii) la IRT quantitativa interna és més acurada en parets compostes amb altes capacitats de calor per unitat d’àrea, aconseguint unes desviacions màximes del 0.20%; (iv) el test podria ser executat en només 30 minuts; (v) el mètode podria permetre l’avaluació d’aspectes relacionats amb la determinació de la U-value en edificis desocupats per T sota 10ºC, especialment a Espanya o països europeus amb un clima mediterrani on aquestes condicions de test podrien representar una limitació. Per tant, la presa de decisions es podria simplificar en entorns construïts reals. De fet, aquesta recerca podria conduir a una millor execució del procés de rehabilitació en edificis que s’espera que tinguin deficiències l’any 2050, augmentant així la taxa de renovació europea a mig termini. La dissertació conclou resumint les principals aportacions d’aquesta investigació. Els temes que s’han plantejat durant la recerca realitzada, i que no es van poder abordar, es comenten i es proposen com a línies de treball futures.
Kossmann, de Menezes Anna Carolina. "Improving predictions of operational energy performance through better estimates of small power consumption." Thesis, Loughborough University, 2013. https://dspace.lboro.ac.uk/2134/13549.
Повний текст джерелаKamal, Rajeev. "Optimization and Performance Study of Select Heating Ventilation and Air Conditioning Technologies for Commercial Buildings." Scholar Commons, 2017. http://scholarcommons.usf.edu/etd/6656.
Повний текст джерелаThirkill, Adam. "Evaluating the uncertainty in the performance of small scale renewables." Thesis, Loughborough University, 2015. https://dspace.lboro.ac.uk/2134/19122.
Повний текст джерелаGao, Lin [Verfasser], Wolfram [Akademischer Betreuer] Elsner, Wolfram [Gutachter] Elsner, and Christian [Gutachter] Cordes. "Trust and Development : The Deep Structure of Institutions-Building and Socio-Economic Performance / Lin Gao ; Gutachter: Wolfram Elsner, Christian Cordes ; Betreuer: Wolfram Elsner." Bremen : Staats- und Universitätsbibliothek Bremen, 2019. http://d-nb.info/1205878394/34.
Повний текст джерелаThorsell, Thomas. "Advances in Thermal Insulation : Vacuum Insulation Panels and Thermal Efficiency to Reduce Energy Usage in Buildings." Doctoral thesis, KTH, Byggnadsteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-90745.
Повний текст джерелаQC 20120228
Bidmonová, Renata. "Energetický posudek a průkaz energetické náročnosti budovy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409858.
Повний текст джерелаAllab, Yacine. "Evaluation expérimentale des performances des systèmes de ventilation dans le bâtiment : efficacité de ventilation et confort thermique." Thesis, Paris, ENSAM, 2017. http://www.theses.fr/2017ENAM0046/document.
Повний текст джерелаThe performance of a system must be well defined, attainable and above all measurable. This is not the case today for ventilation. On the one hand ventilation performance is usually declined on energy efficiency considerations or simply on a rough estimation of ventilation rates. The performance related to thermal comfort and IAQ are addressed separately through dedicated evaluation tools. On the other hand, the existing evaluation tools today are nowadays limited in their practical applications for in situ measurements, in particular in the case of natural and mixed ventilation. The aim of the present thesis is to examine the existing experimental technics, at full scale building in order to propose improvements on evaluation methods and commissioning protocols. The present thesis deals with ventilation performance taking into account ventilation efficiency as intrinsic performance and thermal comfort as overall performance.The first part is devoted to the in situ assessment of intrinsic ventilation performance (ventilation rates, mean age of air, and air exchange efficiency), based on decay tracer gas techniques. After a theorical analysis of the various performance indexes and their corresponding measurement techniques, an experimental study was carried out in a classroom under different ventilation strategies (mechanical, natural & mixed mode). The analysis proved the importance of the application of the tracer gas decay on ventilation rates accuracy with in particular a strong influence of measurement times and used tracer gas concentration. A methodology has been adapted and tested for the measurement of the air exchange efficiency in natural and mixed mode ventilation, by avoiding measurements in exhaust vents (a technique usually used and advocated by current standards).The second part is devoted to in situ assessment of thermal comfort under different ventilation strategies. Different methods, standards and evaluation techniques were tested and compared with occupants’ perception. The results demonstrated the presence of several inadequacies during the implementation of existing methods and standards. Mainly, it concerns the inadequacy of static methods (PMV PPD) for thermal comfort assessment in the presence of fluctuating thermal conditions, even with mechanical ventilation. Uncertainty analysis related to measurement errors has demonstrated the incoherence of current standards in the classification of comfort categories
Holub, Ondřej. "Polyfunkční dům." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226526.
Повний текст джерелаAmenshiah, Ambrose K., and Farhad Analoui. "A Strategic Approach to Local Competency Gap Reduction: The Case of the Oil and Gas Industry in Ghana." 2019. http://hdl.handle.net/10454/17083.
Повний текст джерелаThis empirical research explores local skill capacity gap in the petroleum industry in Ghana using a mixed method approach to study four public organisations. Matched samples of employees (226) were surveyed, while HR directors (9) were purposively sampled and interviewed. The findings suggest a wide local skill gap. Originality, this is one of the very few studies to explore the shortcomings of local skill capacity in public sector organisation. Research implications, more matched-sample studies are necessary to understand IOC’s local skill capacity further. Practically, the study is of significance to the policymakers. The main contribution of the research amongst others is to conceptualise the concept of HRM in Ghana’s context.