Дисертації з теми "Building performance assessment system"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Building performance assessment system".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Shakoorian, Amirali. "Performance Assessment of Building Commissioning Process as a Quality Assurance System." Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/10534.
Повний текст джерелаStojanovic, Bojan. "Lifetime Performance Assessment of Thermal Systems : Studies on Building, Solar and Disctrict Heating Applications." Doctoral thesis, KTH, Byggvetenskap, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-10967.
Повний текст джерелаQC 20100810
Stojanovic, Bojan. "Life performance assessment methodologies for combined solar energy technologies : a case study on system parts in nordic climates." Licentiate thesis, KTH, Civil and Architectural Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4351.
Повний текст джерелаThe main questions concerning energy technologies today are their economical and environmental impacts. These entities are (at the present) assessed on the basis that operations proceed as newly installed/designed systems, during an assumed working life period. While this is the common way of perceiving energy systems, performance-over-time will change as an effect of (e.g. material) degradation and not solely of different operation scenarios. How and to what extent, is the question that needs assessing in order to evaluate if these changes will jeopardise the intended system performance requirement. In turn, this pro-active assessment and analysis is in line with today’s performance based directives, laws, regulations and concepts; of which the working life is an essential part.
The main context of the thesis, is a contribution to the Research and Development (R&D) topic on life performance of energy technologies, with papers on a literature review and case study on two system parts: solar collector and ground heat exchanger (borehole); within the energy technology area of combined solar energy technologies/systems utilised in buildings. The thesis specifically presents a general description of requirements on constructed works and their material, components and systems. It also gives an insight to the energy technology R&D and engineering sector, regarding durability and service life assessment methodologies; and also to the durability of constructed works sector, regarding the needs for assessing material degradation in relation to system performance. The case studies presented in the thesis, show how durability of energy technologies may be sought-after, as well as specific knowledge and useful tools, methodologies and test setups for assessing long-term performance of combined solar energy technologies (in this case a solar-assisted heat pump system utilising a building integrated Unglazed Solar Collector and energy storage).
The utilisation of solar collectors and heat pumps (primarily for space and domestic tap water heating) has rapidly increased in Sweden during the last decades. Sweden has today the largest heat pump market in Europe. During recent years, there has also been an increased interest in heating systems that combine heat pumps with solar collectors (glazed and unglazed) and energy storages; with the aim of attaining a system that provides higher energy and greater economical performances than individual solar collector or heat pump systems. If these systems are to be successful they must be economically feasible; placing emphasis on the cost, durability and performance of the system.
The main issue on life performance of energy technologies is how and to what extent, performance reduction in individual materials and components influences the overall system performance; as the essence of energy system sustainability is system performance.
Slovenec, Derek. "Multi-Hazard Assessment and Performance-Based Design of Facade Systems including Building Frame Interaction." Case Western Reserve University School of Graduate Studies / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=case1560187143941942.
Повний текст джерелаHussein, Johari. "Assessment of Building Performance Measurement Tanzania." Thesis, KTH, Fastigheter och byggande, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-39806.
Повний текст джерелаRouchier, Simon. "Hygorthermal performance assessment of damaged building materials." Phd thesis, Université Claude Bernard - Lyon I, 2012. http://tel.archives-ouvertes.fr/tel-00980172.
Повний текст джерелаPeng, Brian Hsuan-Hsien. "Seismic performance assessment of reinforced concrete buildings with precast concrete floor systems." Thesis, University of Canterbury. Civil and Natural Resources Engineering, 2009. http://hdl.handle.net/10092/3103.
Повний текст джерелаMcElroy, Lori Barbara. "Embedding integrated building performance assessment in design practice." Thesis, University of Strathclyde, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.501849.
Повний текст джерелаIbrahim, Mohamad. "Étude de l’amélioration de la performance énergétique de bâtiments due à l’emploi d’enduit minéral à fort pouvoir isolant." Thesis, Paris, ENMP, 2014. http://www.theses.fr/2014ENMP0043/document.
Повний текст джерелаIn France, the building sector is the largest consumer of energy and accounts for about 43% of the total energy consumption. The building sector offers significant potential for improved energy efficiency through the use of high-performance insulation and energy-efficient systems. For existing buildings, renovation has a high priority in France because these buildings represent a high proportion of energy consumption and they will be present for decades to come. Nowadays, there is a growing interest in the so-called super-insulating materials, such as Aerogels. The objectives of this study are to examine the thermal behavior of buildings and to foster energy efficiency through the use of a newly developed aerogel-based insulating coating as well as the use of renewable energy sources, specifically solar energy. Firstly, the thermal and hygrothermal performance of exterior walls having different layer composition structures are examined. Secondly, the heating energy demand as well as the risk of summer overheating is examined for different construction periods and under different climates. Also, a mathematical model is built and compared to experimental measurement of a recently built full-scale house. Finally, the potential to decrease the heating load by adopting a closed wall loop system is scrutinized. The latter is a proposed system to capture some of the solar energy falling on the south facade available during non-cloudy winter days and transfer it to the north facade through water pipes embedded in the aerogel-based coating
Vesterberg, Jimmy. "A regression approach for assessment of building energy performance." Licentiate thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-92465.
Повний текст джерелаMartins, Liliane Domingos. "Rorschach Performance Assessment System em Crianças." Pontifícia Universidade Católica de Goiás, 2016. http://tede2.pucgoias.edu.br:8080/handle/tede/3644.
Повний текст джерелаMade available in DSpace on 2017-04-24T18:31:19Z (GMT). No. of bitstreams: 1 Liliane Domingos Martins.pdf: 1727390 bytes, checksum: c79964d4931792e22664d308783533c0 (MD5) Previous issue date: 2016-09-28
Rorschach Performance Assessment System – R-PAS – was developed based on recent empirical evidence, as a solution for limitations identified in the Rorscharch Method. In this Doctorate thesis, divided in four sections, it was approached the psychometric basis of Rorschach and R-PAS, and provided an adaptation of this new system for the Brazilian society. In Section I, it was analyzed national and international scientific productions from the past eleven years (2006-2016) about the norms of Rorscharch for children, from the databases Scielo, Pepsic, PsycNet, Clinical Key, Science Direct, and the online platform Taylor & Francis. It was identified a total of 14 studies which results showed a prevalence of international researchs about the standard performance in children from various cultures. Section II is an empirical reliability study between two raters from the same research group and between two different groups considering protocols applied by R-PAS. It was randomly selected 86 protocols of children aged between 7-14 years old, from public and private schools. Results were based on the calculation of the Intraclass Correlation Coefficient (ICC) for 60 variables of the test and the Development Index (DI). The correlation indexes were considered excelent for 100% of the intragrupe analysis and 86,7% for the extragrupe analysis. The results are in agreement with studies that showed that the reliability of raters of the same group are generally higher than that of raters from different groups. Section III is an empirical study dedicated to the investigation of the differences in the performance due to gender in Rorschach, using the R-PAS from 170 girls and 183 boys aged between 7-14 years old, in public and private schools, utilizing 60 variables from the new system. The results showed similar performance between the sexs, but with evident distinctions in the cognitive scope, management of stress and interpersonal area. The most prominent differences and with larger effects were noted for participants aged 13-14 years old. With the same sample, Section IV is an empiric study that aims to present standard performance of 353 non-patient children for 60 variables of R-PAS and the DI. 24 variables and the DI showed significant differences, with a big effect and significant correlations among children in different group of ages (G1, 7-9 years old; G2, 10-12 years old; G3, 13-14 years old). It was observed that as the chronological age increases there is a sophistication of the perceptive processes of cognition, autoperception, interpersonal perception, affects and stress management, thus, increasing the psychological maturity. The four sections of this thesis provide important psychometric properties of Rorschach and R-PAS in children. These represent an advance in the scientific consolidation of this instrument and of the system in Brazil, qualifies the nomothetic evaluation of the data and the clinical interpretation obtained with this technique.
O Rorschach Performance Assessment System – R-PAS (Sistema de Avaliação do Desempenho do Rorschach) foi desenvolvido a partir de um corpo de pesquisas empíricas recentes, buscando solucionar limitações identificadas no Método de Rorschach. A presente tese de Doutorado, organizada em quatro seções, tem como objetivo abordar questões referentes às bases psicométricas do Rorschach e do R-PAS, bem como contribuir para a adaptação do novo sistema no Brasil. Na Seção I foi analisada a produção científica nacional e internacional dos últimos onze anos (2006-2016) sobre a normatização do Rorschach para crianças nas seguintes bases de dados: Scielo, Pepsic, PsycNet, Clinical Key, Science Direct, e na plataforma on-line Taylor & Francis. Foi levantado um total de 14 artigos em cujos resultados evidenciou-se a prevalência de pesquisas internacionais sobre o desempenho padrão de crianças provenientes de diversas culturas. A Seção II consiste em uma pesquisa empírica de fidedignidade entre dois avaliadores de um mesmo grupo de pesquisa e dois de grupos diferentes considerando protocolos aplicados segundo o R-PAS. Foram selecionados aleatoriamente 86 protocolos de crianças na faixa etária de 7- 14 anos, de escolas públicas e privadas. Os resultados foram baseados no cálculo do Coeficiente de Correlação Intraclasses (ICC) de 60 variáveis do teste e do Índice de Desenvolvimento (ID). Os índices de correlação foram considerados excelentes em 100% das análises intragrupo e 86,7% das análises extragrupo. Os resultados corroboram pesquisas nas quais se constatou que a fidedignidade entre avaliadores de um mesmo grupo tende a ser maior do que entre os avaliadores de diferentes grupos. A Seção III consistiu em um artigo empírico dedicado à investigação de diferenças de desempenho em função do sexo no Rorschach por meio do R-PAS de 170 meninas e 183 meninos entre 7 e 14 anos, de escolas públicas e privadas, em 60 variáveis do novo sistema. Os resultados indicaram funcionamento semelhante entre os sexos para a maioria das variáveis, mas destacaram-se distinções nos âmbitos cognitivo, de manejo do estresse e interpessoal. As diferenças mais salientes e com tamanhos de efeito maiores foram notadas para os participantes de 13 e 14 anos. Com a mesma amostra, a Seção IV consistiu em um estudo empírico com o objetivo de apresentar o desempenho padrão de 353 crianças não-pacientes para 60 variáveis do R-PAS e o ID. 24 variáveis e o ID exibiram diferenças estatísticas significativas, com tamanhos de efeito grandes e correlações também significativas entre as crianças de diferentes faixas etárias (G1, de 7-9 anos; G2, de 10-12 anos; G3, de 13-14 anos). Notou-se que à medida que aumenta a idade cronológica ocorre a sofisticação dos processos perceptivos no âmbito da cognição, autopercepção, percepção interpessoal, afetos e manejo do estresse, e, consequentemente, aumento da maturidade psicológica. De maneira geral, as quatro seções da tese indicam importantes propriedades psicométricas do Rorschach e do R-PAS em crianças. Tal esforço avança na consolidação científica do instrumento e do sistema no Brasil, qualifica a leitura nomotética dos dados e as interpretações clínicas realizadas com esta técnica.
Belhadj, Mohamed. "Probabitistic assessment of dynamic system performance /." The Ohio State University, 1993. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487844485898763.
Повний текст джерелаCasquero, Modrego Núria. "Daylight performance assessment of an innovative energy efficient building envelope." Doctoral thesis, Universitat Politècnica de Catalunya, 2016. http://hdl.handle.net/10803/396373.
Повний текст джерелаEls edificis estan considerats els primers contribuïdors del desenvolupament socioeconòmic d’un país. No obstant, utilitzen una gran quantitat d’energia i recursos naturals disponibles. Amb la industrialització, que va donar lloc a un increment de la població urbana, aquest resulta un factor que ha fet augmentar el nombre d’edificis urbans i ha creat un major efecte en el consum energètic. Tot i la implementació de polítiques d’eficiència energètica, el consum energètic ha augmentat durant les ultimes dècades afectant a la despesa operacional de l’edifici. Per aquesta raó, la indústria de la construcció cerca crear models de desenvolupament sostenible en edificis i que tinguin un baix impacte mediambiental i un alt impacte econòmic i guanys socials. Això requereix l’adopció d’un sistema integrat que cobreixi un nombre de característiques tals com reducció energètica, millora de l’ús de materials, la qual cosa inclou l’aigua, reutilització i reciclatge de materials, i emissions de control. Més que mai, a dia d’avui hi ha una creixent preocupació per l’esgotament dels recursos naturals. Per tant, desenvolupament i implementació de noves tecnologies d’energia renovable s’han tornat importants i necessàries per la societat. Des de que la terra rep constantment radiació solar, la qual resulta una font d’energia gratuïta neta i abundant, la utilització de la energia solar en edificis esta agafant força. A dia d’avui, amb les noves tecnologies, la llum solar pot ser emprada per una varietat d’usos, tals com generadora d’electricitat, llum interior natural, escalfadora d’aigua, entre altres. Actualment els nous edificis acostumen a integrar sistemes solars dintre de la part exterior de la envolvent, els quals poden col·lectar grans quantitat d’energia solar. A més a més, els humans hem evolucionat sota la influència de la llum del sol i el cicle llum-foscor mitjançant el desenvolupament d’una varietat d’avantatges psicològics, la qual cosa afecta al caràcter i salut de la gent, així com menor absència del lloc de treball i més alta productivitat. Després de la introducció de la llum elèctrica, la gent va començar a passar més temps dins de l’interior dels edificis. Conseqüentment, el confort tèrmic es va tornar un factor significatiu pels humans amb vistes a desenvolupar una activitat dintre de l’edifici. Així que, una millora en la eficiència energètica dels edificis contribueix al confort interior i la salut dels ocupants. Per aquest motiu, façanes i cobertes multifuncionals estan darrerament guanyant l’atenció del mercat de la construcció a causa de la seva versatilitat en l’estalvi d’energia i la millora en el confort interior de l’edifici. La present recerca pretén cobrir les qüestions comentades amb anterioritat referents a la millora de l’eficiència energètica dels edificis i obtenir, d’aquesta manera, una reducció en consum energètic amb tecnologies innovadores que utilitzen fonts d’energia solar per crear un ambient interior confortable. Per aquest objectiu, la present Tesis s’ha dividit en dos línies de treball. La primera línia de recerca descriu i il·lustra els problemes constructius més habituals durant el cicle de vida de les façanes i cobertes dels edificis construïts amb una solució constructiva de baix rendiment energètic. Per tant, s’ha estudiat un cas real on s’ha rehabilitat energèticament la envolvent exterior d’un edifici plurifamiliar d’habitatge social. Aquesta feina te la intenció entendre la complexitat i els requeriments de la envolvent exterior de l’edifici en termes d’eficiència energètica, juntament amb el confort interior dels ocupants. A través del cas real estudiat, s’ha observat millores significatives en l’estalvi energètic després de la rehabilitació energètica de les façanes i cobertes que dóna lloc a un augment del confort tèrmic interior. El resultat demostra la necessitat que hi ha d’empènyer a la indústria de la construcció de dissenyar i desenvolupar noves envolvents exteriors energèticament eficients tant per noves construccions com per edificis rehabilitats. Una de les solucions novells és el cas del Panell de Formigó Translúcid (Translucent Concrete Panel – TCP). El TCP presenta una nova alternativa passiva el qual redueix el consum energètic tot optimitzant l’entrada de llum solar natural a dintre de l’edifici a través de la tradicional part opaca de les parets exterior de façana i coberta. Això permet la permeabilitat de la llum natural a través de les parets tot millorant el confort tèrmic i lumínic interior. Basada en els resultats obtinguts en la primera línia de recerca, la segona línia només estudia i analitza el comportament de la llum del TCP. Durant les darreres dècades, ciència i indústria han creat diferents sistemes lumínics actius i passius els quals intenten proveir solucions per reduir i alleugerir la ineficiència energètica dels edificis. El TCP es veu com una nova tecnologia constructiva, energèticament eficient, dissenyada per envolvents exteriors, i que té la propietat de resoldre la càrrega energètica de la part opaca de les parets i permetre l’entrada de llum natural. No obstant això, actualment el comportament de la llum dels TCPs no es pot simular per ordinador degut a que no hi ha cap software en el mercat que pugui simular i analitzar les propietats de transmissió de llum dels dos components principals del TCP i que són: Concentrador Solar (Compound Parabolic Concentrator – CPC) i la Fibra Òptica (Optical Fiber – OF). Per tant, nous estudis experimentals han hagut de ser dissenyats amb procediments teòrics. Els tests van tenir lloc a l’exterior sota condicions reals de cel i d’aquesta manera en un futur poder crear i validar programes els quals permetran una fàcil adopció del TCP per part de la indústria. No obstant això, tots els tests van ser dividits en dos categories. El primer buscava demostrar i confirmar que el TCP, amb un disseny apropiat dels seus components i orientació, pot distribuir la llum natural dintre del edifici durant les hores solars. Diferents panells de TCP amb diferents diàmetres i rati de les OF, van ser assajats a l’exterior junt amb panells amb CPCs de diferents geometries. Com els primers resultats van ser òptims, això va ajudar poder moure la recerca a un segon nivell el qual estava principalment centrat en la millora de la quantitat de llum solar capturada amb els CPCs i la quantitat de llum distribuïda amb les OFs dintre de l’edifici. Amb aquest objectiu, la present recerca va proposar modificar els extrems de les OFs amb diferent geometries, i així analitzar-les independentment i alinear-les amb CPCs de diferent geometries. Aquest ha sigut un punt important per l’estudi, degut a que els extrems modificats de la OF són capaços de millorar l’entrada de llum natural a l’interior de l’edifici Per una altra banda, hi ha un gran nombre de diferents sistemes mètrics utilitzats per professionals per avaluar les propietats de la llum dintre d’un espai. Per aquest motiu, tots els tests van ser dissenyat seguint els objectius de la recerca. No obstant això, la present Tesis va decidir dissenyar i construir un Petit Portable Banc de Proves (Small Portable Test Bed – SPTB) per ser utilitzat a l’exterior i el qual té un sistema integrat de control de sensors sense cables i que activament respon als canvis exteriors climàtics durant els tests. El SPTB es una mena de cub el qual vol simular la envolvent exterior de l’edifici amb quatre façanes i coberta. Aquest disseny específic pot permetre analitzar a la vegada les façanes sota les quatre orientacions, juntament amb la coberta. Així que el SPTB va ser concebut com una eina per fer assajos sota condicions reals exteriors. A més a més, gràcies a la versatilitat de la seva estructura, les dimensions del SPTB poden ser canviades en cas necessari. Per la present recerca, el primer objectiu d’aquest banc de proves portable era fer una avaluació justa del comportament de la llum del TCP basat en tests de llum dinàmics. I en segon lloc, el SPTB buscava desenvolupar una eina física per ser utilitzada més enllà de les necessitats de la present recerca, així com en altres projectes i assajos. Pel novell TCP cas d’estudi, el SPTB va ser ubicat a l’exterior i una varietat de petites mostres a escala real de TCPs van ser assajades per analitzar el comportament de la llum sota condicions de cel reals, així com una recopilació de dades les quals eren enviades wireless i emmagatzemades a una base de dades centrals ubicada a internet. Els resultats finals obtinguts en la present Tesis confirmen que utilitzant la tecnologia comentada en aquesta recerca, es demostra que les mesures preses en eficiència energètica, pot millorar el confort interior i la salut dels ocupants. Aquest és el cas de la rehabilitació energètica de la façana utilitzada com a cas d’estudi tot obtenint aproximadament un 12% d’estalvi energètic. Per un altre costat, el TCP equipat amb CPCs, es capaç de dispersar (directa i difusa) llum solar, i d’aquesta manera millorar la distribució lumínica en el interior de l’edifici. La recerca ha millorar la llum capturada i dispersada per les OFs tot modificant la geometria dels extrems de la OF. Amb l’ús del SPTB, ha sigut possible avaluar el comportament de la llum del TCP tot utilitzant sistemes mètrics lumínics dinàmics. No obstant, més recerca experimentals junt amb noves simulacions per ordinador, s’haurien de fer en un futur a fi d’obtenir resultats més concloents en termes d’estalvi energètic i confort tèrmic interior
Los edificios son considerados los primeros contribuyentes al desarrollo socioeconómico de un país. No obstante, utilizan una gran cantidad de la energía y de recursos naturales disponibles. Con la industrialización tuvo lugar un importante incremento de la población urbana y este hecho provocó un aumento del número de edificios urbanos, los cuales provocaron un mayor incremento del consumo energético. A pesar de que se han implementado políticas de eficiencia energética, el consumo energético ha seguido aumentando durante las últimas décadas y ha afectado al gasto operacional del edificio. Por este motivo, la industria de la construcción busca crear modelos de desarrollo sostenible en edificios que tengan un bajo impacto medioambiental, y un alto impacto económico y beneficios sociales. Esto requiere la adopción de un sistema integrado que cubra un número de características, así como reducción energética, mejora del uso de los materiales, incluyendo el agua, reutilización y reciclaje de materiales, y emisiones de control. Más que nunca, a día de hoy, hay una creciente preocupación por el agotamiento de los recursos naturales. Por tanto, desarrollo e implementación de nuevas tecnologías de energía renovable resultan tan importantes y necesarias para la sociedad. Desde que la tierra recibe constantemente radiación solar, la cual es una fuente de energía gratuita, limpia y abundante, el uso de la energía solar en edificios está ganando fuerza. A día de hoy, con las nuevas tecnologías, la luz solar puede ser empleada para una amplia variedad de usos, así como generadora de electricidad, luz interior natural, calentadora de agua, entre otras utilidades. Actualmente, los nuevos edificios acostumbran a integrar sistemas solares dentro de la parte exterior de la envolvente del edificio, los cuales pueden captar gran cantidad de energía solar. Además, los humanos hemos evolucionado bajo la influencia de la luz solar y el ciclo luz-oscuridad. Este hecho ha permitido el desarrollo de una variedad de ventajas psicológicas que afectan al carácter y a la salud de las personas, así como a una menor ausencia del lugar de trabajo y una alta productividad. Tras la aparición de la luz eléctrica, la gente comenzó a pasar más tiempo dentro de los edificios. Consecuentemente, el confort térmico resultó un factor significativo para los humanos en vistas a poder desarrollar una actividad dentro del edificio. Así pues, vemos que una mejora en la eficiencia energética de los edificios contribuye al confort interior y a la salud de los ocupantes. Por este motivo, últimamente, fachadas y cubiertas multifuncionales están ganando la atención del mercado de la construcción debido a su versatilidad en el ahorro de energía y en la mejora del confort interior del edificio. La presente investigación cubre las cuestiones comentadas con anterioridad referentes a la mejora de la eficiencia energética de los edificios, y así obtener una reducción en el consumo energético mediante tecnologías innovadoras que utilizan fuentes de energía solar para crear un ambiente interior confortable. Por este motivo, la presente Tesis está dividida en dos líneas de trabajo. La primera línea de investigación describe e ilustra los problemas constructivos más habituales durante el ciclo de vida de las fachadas y cubiertas de los edificios construidos con una solución constructiva de bajo rendimiento energético. De tal manera, se ha estudiado un caso real en donde se ha rehabilitado energéticamente la envolvente exterior de un edificio plurifamiliar de vivienda social. Este trabajo tiene la intención de ser utilizado como una herramienta para entender la complejidad y los requisitos de la envolvente exterior del edificio en temas de eficiencia energética, junto al confort interior de los ocupantes. A través del caso real estudiado, se han observado mejoras significativas en el ahorro energético después de la rehabilitación energética de las fachadas y cubierta, dando lugar a un aumento del confort térmico interior. El resultado demuestra la necesidad de incitar a la industria de la construcción para que sea capaz de diseñar y desarrollar nuevas envolventes exteriores energéticamente eficientes, tanto en el caso de nuevas construcciones como en el de edificios rehabilitados. Una de las soluciones noveles es el caso del Panel de Hormigón Translucido (Translucent Concrete Panel – TCP). El TCP presenta una nueva alternativa pasiva capaz de reducir el consumo energético del edificio, con la optimización de la entrada de luz solar natural dentro del mismo, a través de la tradicional parte opaca de las paredes exteriores de fachada y cubierta, permitiendo así la permeabilidad de la luz solar a través de las paredes y mejorando el confort térmico y lumínico interior. Basada en los resultados obtenidos en la primera línea de investigación, la segunda línea solamente estudia y analiza el comportamiento de la luz del TCP. Durante las últimas décadas, ciencia e industria han creado diferentes sistemas lumínicos activos y pasivos los cuales intentan proveer soluciones para reducir y aligerar la ineficiencia energética de los edificios. El TCP está considerado como una nueva tecnología constructiva energéticamente eficiente diseñada para envolventes exteriores, y que tiene la propiedad de resolver la carga energética de la parte opaca de las paredes permitiendo así la entrada de luz natural. No obstante, actualmente el comportamiento de la luz de los TCPs no se puede simular por ordenador debido a que no hay ningún software en el mercado que pueda simular y analizar las propiedades de transmisión de luz de los dos componentes principales del TCP que son Concentrador Solar (Compound Parabolic Concentrator – CPC) y la Fibra Óptica (Optical Fiber – OF). Por tanto, los nuevos estudios experimentales han tenido que ser diseñados siguiendo procedimientos teóricos. Los test tuvieron lugar en el exterior bajo condiciones reales de cielo y de esta manera en un futuro poder crear y validar programas los cuales permiten una fácil adopción del TCP por parte de la industria. No obstante, todos los test se dividieron en dos categorías. El primero buscaba demostrar y confirmar que el TCP, con un diseño apropiado de sus componentes y orientación, puede distribuir la luz natural dentro del edificio durante las horas solares. Diferentes paneles de TCP, con diferentes diámetros y ratios de OFs, fueron ensayados en el exterior junto con paneles con CPCs de diferentes geometrías. Dado que los primeros resultados fueron óptimos, se pudo dirigir la investigación a un segundo nivel, principalmente centrado en la mejora de la cantidad de luz solar capturada con los CPCs y la cantidad de luz distribuida con las OFs dentro del edificio. Con este objetivo, la presente investigación propuso modificar geométricamente los extremos de las OFs con diferentes geometrías, y así analizarlas independientemente y alinearlas con CPCs de diferentes geometrías. Este ha sido un punto importante del estudio, debido a que los extremos modificados de las OFs son capaces de mejorar la entrada de luz natural en el interior del edificio. Por otro lado, existe una gran diferencia entre los diferentes sistemas métricos utilizados por los profesionales para evaluar las propiedades de la luz dentro de un espacio. Por este motivo, todos los ensayos fueron diseñados siguiendo los objetivos de la investigación. No obstante, la presente Tesis decidió diseñar y construir un Pequeño Portable Banco de Pruebas (Small Portable Test Bed – SPTB) para ser utilizado en el exterior, el cual tiene un sistema integrado de control de sensores sin cables y que activamente responden a los cambios exteriores climáticos durante los ensayos. El SPTB es una especie de cubo que pretende simular la envolvente exterior del edificio con cuatro fachadas y cubierta. Este diseño específico permite analizar a la vez las fachadas bajo las cuatro orientaciones junto con la cubierta. De hecho, el SPTB fue concebido como una herramienta versátil para realizar ensayos bajo condiciones reales exteriores. Además, gracias a la versatilidad de su estructura, las dimensiones del SPTB pueden ser cambiadas en caso necesario. Para la presente investigación, el primer objetivo de este banco de pruebas era realizar una evaluación justa del comportamiento de la luz del TCP basado en ensayos de luz dinámicos. Y en segundo lugar, el SPTB buscaba desarrollar una herramienta física para ser utilizada más allá de las necesidades de la presente investigación, así como en otros proyectos y ensayos. Para el novel TCP caso de estudio, el SPTB fue ubicado en el exterior y una variedad de pequeñas muestras a escala real de TCPs fueron ensayadas para analizar el comportamiento de la luz bajo condiciones reales del cielo, así como una recopilación de datos los cuales eran enviados Wireless i guardadas a una base de datos centrales ubicado en internet. Los resultados finales obtenidos en la presente Tesis confirman que, utilizando la tecnología comentada en ésta investigación, se demuestra que las medidas tomadas en eficiencia energética pueden mejorar el confort interior y la salud de los ocupantes. Éste es el caso de la rehabilitación energética de la fachada utilizada como casa de estudio donde se obtuvo aproximadamente un 12% de ahorro energético. Por otro lado, el TCP equipado con CPCs, es capaz de dispersar (directa y difusa) luz solar, i de esta manera mejorar la distribución lumínica del interior del edificio. La investigación ha mejorado la luz capturada y dispersada por las OFs gracias a la modificación de los extremos de la OF. Con el uso del SPTB, ha sido posible evaluar el comportamiento de la luz del TCP con la utilización de sistemas métricos lumínicos dinámicos. No obstante, más investigación experimental junto con nuevas simulaciones por ordenador, se tendrían que hacer en un futuro a fin de obtener resultados más concluyentes en términos de ahorro energético y confort térmico interior
Horsley, Andrew. "Better by design : integrating energy performance assessment into building design." Thesis, University of Surrey, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.273253.
Повний текст джерелаHassanie, Samer. "A Systematic Approach to Integrated Building Performance Assessment and Visualisation." Licentiate thesis, KTH, Installations- och energisystem, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-192563.
Повний текст джерелаQC 20160916
Djuric, Natasa. "Real-time supervision of building HVAC system performance." Doctoral thesis, Norwegian University of Science and Technology, Faculty of Engineering Science and Technology, 2008. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-2215.
Повний текст джерелаThis thesis presents techniques for improving building HVAC system performance in existing buildings generated using simulation-based tools and real data. Therefore, one of the aims has been to research the needs and possibilities to assess and improve building HVAC system performance. In addition, this thesis aims at an advanced utilization of building energy management system (BEMS) and the provision of useful information to building operators using simulation tools.
Buildings are becoming more complex systems with many elements, while BEMS provide many data about the building systems. There are, however, many faults and issues in building performance, but there are legislative and cost-benefit forces induced by energy savings. Therefore, both BEMS and the computer-based tools have to be utilized more efficiently to improve building performance.
The thesis consists of four main parts that can be read separately. The first part explains the term commissioning and the commissioning tool work principal based on literature reviews. The second part presents practical experiences and issues introduced through the work on this study. The third part deals with the computer-based tools application in design and operation. This part is divided into two chapters. The first deals with improvement in the design, and the second deals with the improvement in the control strategies. The last part of the thesis gives several rules for fault diagnosis developed using simulation tools. In addition, this part aims at the practical explanation of the faults in the building HVAC systems.
The practical background for the thesis was obtained though two surveys. The first survey was carried out with the aim to find the commissioning targets in Norwegian building facilities. In that way, an overview of the most typical buildings, HVAC equipment, and their related problems was obtained. An on-site survey was carried out on an example building, which was beneficial for introducing the building maintenance structure and the real hydronic heating system faults.
Coupled simulation and optimization programs (EnergyPlus and GenOpt) were utilized for improving the building performances. These tools were used for improving the design and the control strategies in the HVAC systems. Buildings with a hydronic heating system were analyzed for the purpose of improving the design. Since there are issues in using the optimization tool, GenOpt, a few procedures for different practical problems have been suggested. The optimization results show that the choice of the optimization functions influences significantly the design parameters for the hydronic heating system.
Since building construction and equipment characteristics are changing over time, there is a need to find new control strategies which can meet the actual building demand. This problem has been also elaborated on by using EnergyPlus and GenOpt. The control strategies in two different HVAC systems were analyzed, including the hydronic heating system and the ventilation system with the recovery wheel. The developed approach for the strategy optimization includes: involving the optimization variables and the objective function and developing information flow for handling the optimization process.
The real data obtained from BEMS and the additional measurements have been utilized to explain faults in the hydronic heating system. To couple real data and the simple heat balance model, the procedure for the model calibration by use of an optimization algorithm has been developed. Using this model, three operating faults in the hydronic heating system have been elaborated.
Using the simulation tools EnergyPlus and TRNSYS, several fault detection and diagnosis (FDD) rules have been generated. The FDD rules were established in three steps: testing different faults, calculating the performance indices (PI), and classifying the observed PIs. These rules have been established for the air cooling system and the hydronic heating system. The rules can diagnose the control and the component faults. Finally, analyzing the causes and the effects of the tested faults, useful information for the building maintenance has been descriptively explained.
The most important conclusions are related to a practical connection of the real data and simulation-based tools. For a complete understanding of system faults, it is necessary to provide real-life information. Even though BEMS provides many building data, it was proven that BEMS is not completely utilized. Therefore, the control strategies can always be improved and tuned to the actual building demands using the simulation and optimization tools. It was proven that many different FDD rules for HVAC systems can be generated using the simulation tools. Therefore, these FDD rules can be used as manual instructions for the building operators or as a framework for the automated FDD algorithms.
Denne avhandlingen presenterer noen fremgangsmåter for forbedring av ytelser for VVS-tekniske anlegg i eksisterende bygninger basert på bruk av simuleringsverktøy og virkelige måledata. Ett av målene har vært å undersøke behov og muligheter for vurdering og forbedring av ytelser for VVS-anlegg i bygninger. I tillegg har denne avhandlingen hatt som mål å fremme bruk av SD-anlegg samt å fremskaffe nyttig informasjon til driftspersonalet.
Bygninger blir stadig mer kompliserte systemer som inneholder flere og flere komponenter mens SD-anlegg håndterer en stadig større mengde data fra bygningsinstallasjoner. På den ene siden registreres det ofte feil og problemer med hensyn til ytelsene til de VVS-tekniske installasjonene. På den andre siden innføres det stadig strengere lovmessige pålegg og kost-nyttekrav motivert i energieffektiviseringen. SD-anlegg og databaserte verktøy bør derfor brukes mer effektivt for forbedring av ytelsene.
Avhandlingen består av fire hoveddeler hvor hver del kan leses separat. Den første delen, som er basert på literatturstudie, forklarer funksjonskontroll som begrep og prinsipper for oppbygging av verktøy for funksjonskontroll. Den andre delen presenterer praktisk erfaring og problemstillinger utviklet og behandlet i løpet av arbeidet med avhandlingen. Den tredje delen handler om anvendelse av databaserte verktøy for forbedring av ytelsen for VVS-tekniske installasjoner. Den tredje delen er delt opp i to kapitler, hvorav et handler om forbedring av systemløsninger og et om forbedring av styringsstrategier. Den siste delen presenterer flere regler for feilsøking og diagnostisering utviklet gjennom bruk av simuleringsverktøy. I tillegg gir denne delen en praktisk forklaring av feilene i de VVS-anleggene som er behandlet i undersøkelsen.
Det praktiske grunnlaget for avhandlingen er etablert gjennom to undersøkelser. Den første var en spørreundersøkelse som hadde til hensikt å kartlegge målsetninger for funksjonskontroll i norske bygninger. Gjennom dette ble det etablert en oversikt over de mest typiske bygninger med tilhørende VVS-anlegg og de mest forekommende problemene. En dypere undersøkelse ble utført på ett casebygg. Denne undersøkelsen viste seg å være nyttig både for kartlegging av betydningen av organisering av driften av bygningen og for avdekking av de virkelige feilene i det vannbårne oppvarmingssystemet.
En kobling mellom et simulerings- og et optimaliseringsprogram (EnergyPlus og GenOpt) har vært benyttet for forbedring av ytelsene for de VVS-tekniske installasjonene. Disse verktøyene har vært brukt for forbedring av både systemløsningene og styringsstrategiene for VVS-anlegg. Bygninger med vannbåren oppvarmingssystem har vært analysert for å forbedre systemløsningen. På grunn av begrensninger i bruken av optimaliseringsverktøyet GenOpt, har det blitt utviklet egne prosedyrer for håndtering av visse typer problemstillinger hvor denne begrensningen opptrer. Resultatene for optimaliseringen viser at valg av objektfunksjoner påvirker betydelig parametrene i det vannbårne oppvarmingssystemet.
Endringer i egenskapene til både bygningskonstruksjoner og utstyr som skjer på grunn av aldring over tiden, gjør det nødvendig med tilpassning av styringsstrategier slik at det virkelige behovet kan bli dekket. Denne problemstillingen har vært analysert ved bruk av EnergyPlus og GenOpt. Styringsstrategiene for to forskjellige VVS-anlegg, et vannbåret oppvarmingssystem og et ventilasjonsanlegg med varmegjenvinner har blitt behandlet. Den utviklete prosedyren for optimalisering av styringsstrategien består av følgende steg: innføring av optimaliseringsvariabler og objektfunksjon, samt utvikling av informasjonsflyt for behandling av optimaliseringsprosessen.
De virkelige data, både fra SD-anlegg og tilleggsmålinger, har vært benyttet for praktisk forklaring av feilene i oppvarmingssystemet. En prosedyre for modellkalibrering basert på bruk av en optimaliseringsalgoritme som kobler sammen de virkelige data og en enkel varmebalansemodell har blitt foreslått. Tre konkrete driftsfeil i oppvarmingssystemet har blitt belyst gjennom bruk av denne varmebalansemodellen.
Flere regler for feilsøking og diagnostisering har blitt utviklet ved hjelp av simuleringsverktøyene EnergyPlus and TRNSYS. Denne utviklingen har bestått av tre ulike steg: testing av bestemte feil, beregning av ytelsesindikatorer og til slutt klassifisering av de observerte ytelsesindikatorer. Reglene har blitt utviklet for et system av aggregater for luftkjøling og for et vannbåret oppvarmingssystem. Reglene kan diagnostisere både styringsfeil og komponentfeil. Til slutt presenteres informasjon som er nyttig for drift av VVS-tekniske installasjoner i bygninger basert på en analyse av årsakene for og virkningene av de feil som er behandlet.
De viktigste konklusjonene er knyttet til praktisk kombinasjon av virkelige måleverdier og simuleringsverktøy. Informasjon fra det virkelig liv er helt nødvendig for å få en god forståelse av feil som oppstår i anlegg. Det er også vist at potensialet som ligger i alle de data som er tilgjengelige gjennom SD-anlegg, ikke er fullt utnyttet. Gjennom bruk av simuleringsverktøy kan styringsstrategiene alltid bli bedre tilpasset og innjustert til de virkelige behov i bygningen. Simuleringsverktøy kan også brukes for utvikling av prosedyrer for feilsøking og diagnostisering i VVS-tekniske anlegg. Disse prosedyrene kan brukes enten som en veileder for manuell feilsøking og detektering eller som grunnlag for utvikling av automatiserte algoritmer.
Paper II, VI and VII are reprinted with kind permission from Elsevier, sciencedirect.com
Olaniyan, Sule Adeniyi. "Sustainable lime based mortars : performance assessment of composites for building construction." Thesis, Glasgow Caledonian University, 2017. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.743903.
Повний текст джерелаNepal, Jaya. "Reliability-based performance assessment and optimum maintenance of corroded reinforced concrete structures." Thesis, University of Greenwich, 2015. http://gala.gre.ac.uk/18202/.
Повний текст джерелаPark, Hae-Jun. "Development of a holistic approach to integrate fire safety performance with building design." Digital WPI, 2014. https://digitalcommons.wpi.edu/etd-dissertations/41.
Повний текст джерелаPrando, Dario. "Global sensitivity analysis of the building energy performance and correlation assessment of the design parameters." Thesis, KTH, Byggnadsteknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-35044.
Повний текст джерелаBueno, Cristiane. "Avaliação de ciclo de vida na construção civil: análise de sensibilidade." Universidade de São Paulo, 2014. http://www.teses.usp.br/teses/disponiveis/102/102131/tde-10112014-144911/.
Повний текст джерелаRegarding the evaluation of building systems, the analysis of existing buildings environmental certification systems reveals that there are few tools to evaluate environmental performance objectively and holistically through Life Cycle Analysis (LCA) predominating the product attributes recognition and thus losing the global perspective of impacts. Among the main difficulties encountered in the application of LCA in building systems, lies the lack of inventory data available for building systems in the Brazilian scene, which makes the application of the methodology even more complex and time consuming. In the other hand, international databases provide a considerable amount of information, which are often used for studies addressing the Brazilian context. Thus, this research aimed to answer the following questions: a) whether collected for identical processes, the data available in the international validated databases would lead to results similar to those obtained by studies based on primary data collected in the Brazilian context? b) Are the impact assessment methodologies currently available able to fully and consistently evaluate the main potential impacts derived from the lifecycle of traditional building materials? Therefore, the objective of this research was to perform a sensitivity analysis of the results of a comparative LCA case study to the use of secondary data (provided by European databases) or primary data (collected in the Brazilian context), as well as the use of different Life Cycle Impact Assessment (LCIA) methodologies, identifying the impact categories of most significant contribution in the evaluation of traditional construction systems, through the application of the methodology in a case study. The results showed that the geographic scope of the data sources and the choice among different LCIA methods are points of high sensitivity of LCA studies, which must be evaluated and described in detail to avoid misleading conclusions. Furthermore, the development of an LCIA category addressing impacts of mining activities was presented as the main demand for future developments.
Van, Heerden Eugene. "Integrated simulation of building thermal performance, HVAC system and control." Thesis, University of Pretoria, 1997. http://hdl.handle.net/2263/37304.
Повний текст джерелаThesis (PhD)--University of Pretoria, 1997.
gm2014
Mechanical and Aeronautical Engineering
unrestricted
Fiener, Yusef. "An intelligent system for vulnerability and remediation assessment of flooded residential buildings." Thesis, Loughborough University, 2011. https://dspace.lboro.ac.uk/2134/9150.
Повний текст джерелаJoshi, Surabhi. "Guidelines to integrate life cycle assessment in building design." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/31791.
Повний текст джерелаCommittee Chair: Augenbroe, Godfried; Committee Member: Bayer, Charlene; Committee Member: Gentry, Russell. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Naveros, Mesa Ibán. "Modelling heat transfer for energy effiency assessment of buildings : Identification of physical parameters." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSEI112.
Повний текст джерелаEnergy efficiency is one of the two pillars to decrease the use of non-renewable energy besides the use of renewables energies. In fact, buildings are central to the EU's energy efficiency policy, as nearly 40% of the final energy consumption and 36% of greenhouse gas emissions take place in houses, offices, shops and other buildings. Buildings may be considered as dynamic systems and heat transfer in buildings may be represented using dynamic models. In this way, heat transfer in buildings may be described by thermal networks which may be stated considering graph theory and thermodynamics, and may be deduced from the classical heat equation. Thermal networks may be expressed as a system of linear differential algebraic equations (DAE) and the system of linear DAE may be transformed into a state-space representation from which an autoregressive model with exogenous (ARX) can be obtained. These different model structures may be used for identifying the physical parameters of thermal networks which implies that this methodology may be useful for identifying the intrinsic performance of buildings and tackling the reduction of non-renewable energy consumption in buildings. This may facilitate the assessment of energy efficiency of buildings within a reproducible framework which allows the comparison between different constructive solutions.The main original contributions of this dissertation are: 1) thermal networks are stated from graph theory and thermodynamics, leaving back the thermal-electrical analogy; 2) classical heat equation is connected explicitly to a system of DAE (thermal network) by using the finite elements; 3) the transformations for deducing heat transfer models with physical meaning from the classical heat equation are put altogether; 4) transformations between models may are done from thermal networks to autoregressive models with exogenous (ARX) and back; and 5) a criterion for selecting the order of the model by frequency analysis of measurements is proposed
Lai, Chi-Ming. "Development and thermal performance assessment of the opaque PV façades for subtropical climate region." 京都大学 (Kyoto University), 2016. http://hdl.handle.net/2433/204562.
Повний текст джерелаRomero, Michelle. "A utilization assessment of the Texas performance measurement system /." View online, 2004. http://ecommons.txstate.edu/arp/26/.
Повний текст джерелаNiblock, James Hagan. "An automated system for performance assessment of airport lighting." Thesis, Queen's University Belfast, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.492523.
Повний текст джерелаLiu, Kaibo. "Data fusion for system modeling, performance assessment and improvement." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/52937.
Повний текст джерелаKasrani, Imen. "Development of a Performance Assessment System for Language Learning." Wright State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=wright1515958862300186.
Повний текст джерелаO'Neil, Michael S. "Applicability of performance assessment tools to Marine Corps Air Ground Task Force C4 System of Systems Performance Assessment." Thesis, Monterey, California. Naval Postgraduate School, 2010. http://hdl.handle.net/10945/5146.
Повний текст джерелаThis research focuses on the application of existing assessment tools that may be applicable to Marine Air Ground Task Force (MAGTF) Command, Control, Communications and Computers (C4) System of Systems (SoS) performance assessment efforts. An analysis of the Marine Corps Tactical Systems Support Activity's (MCTSSA's) C4 SoS assessment approach provides a means for defining a MAGTF C4 SoS and for illustrating how that SoS is represented in the assessment environment. This provides the framework and context for follow-on examination of SoS performance metrics. The challenges with defining specific performance metrics and examination of past assessment events using those metrics provide the basis for discussion of alternative approaches and application of assessment tools specifically tailored for SoS assessment efforts. Three specific tools, i-Score, Interoperability Quotient (IQ), and Dynamic Software Architecture Visualization and Evaluation (DynSAVE), are examined. The results indicate i-Score and DynSAVE offer the greatest potential applicability to the MAGTF SoS assessment effort. In a culminating discussion, applying a multicriteria identification process to obtain a mathematical model that correlates an interoperability measure with measurable SoS performance criteria is proposed as a means of extending the i-Score model for greater applicability to SoS assessment and performance improvement efforts.
Wormald, Roy. "Solar energy in construction : an assessment of solar wall thermal performance in Europe." Thesis, Liverpool John Moores University, 1998. http://researchonline.ljmu.ac.uk/5059/.
Повний текст джерелаZhang, Kaiying. "Studying building behaviors by using the Building Management System of a new teaching building : A study case of a school building in Stockholm." Thesis, KTH, Hållbara byggnader, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-278537.
Повний текст джерелаZhang, S. L. "Optical amplifiers for fibre communications : modelling and system performance assessment." Thesis, Bangor University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303377.
Повний текст джерелаCaponi, Remo. "The performance of Italian civil justice system: an empirical assessment." IUS ET VERITAS, 2017. http://repositorio.pucp.edu.pe/index/handle/123456789/122486.
Повний текст джерелаLa longitud poco razonable de los procesos civiles italianos continúa llenando páginas de periódicos y revistas. De acuerdo con algunas opiniones autorizadas, la ineficiencia del sistema de justicia civil ayuda a explicar el motivo por el cual el modelo italiano de legislación en materia de procedimiento civil, así como su investigación académica, no sean tan influyentes en la escena europea como lo fueron en el pasado. Es interesante notar que una tesis opuesta ha señalado que el derecho procesal italiano y las investigaciones recientes sobre el proceso civil carecen de un enfoque claro, integral, actualizado y orientado por principios sobre los problemas y desafíos que el sistema de justicia civil afronta actualmente. Tal enfoque anticuado y demasiado complicado podría contribuir a la ineficiencia del sistema de justicia civil italiano. El Italian Law Journal, cuyo objetivo es la difusión de conocimiento (y crítica) del sistema legal italiano y la promoción del debate internacional entre abogados de distintas tradiciones, puede ser un modo apropiado para profundizar nuestra comprensión del desempeño actual del sistema de justicia civil italiano. Puede, en particular, ayudar a determinar las principales causas de las ineficiencias con el fin de evaluar (en un artículo posterior) si la forma predominante de pensamiento de los estudiosos del derecho posiblemente, al final, exacerba problemas relevantes.
Sharma, Shivangi. "Performance enhancement of building-integrated concentrator photovoltaic system using phase change materials." Thesis, University of Exeter, 2017. http://hdl.handle.net/10871/33859.
Повний текст джерелаXiong, Xiaolu. "Theory and Practice: Improving Retention Performance through Student Modeling and System Building." Digital WPI, 2017. https://digitalcommons.wpi.edu/etd-dissertations/139.
Повний текст джерелаXu, Weili. "An Energy and Cost Performance Optimization Platform for Commercial Building System Design." Research Showcase @ CMU, 2017. http://repository.cmu.edu/dissertations/956.
Повний текст джерелаLange, David. "Risk and performance based fire safety design of steel and composite structures." Thesis, University of Edinburgh, 2009. http://hdl.handle.net/1842/3159.
Повний текст джерелаHoxha, Elda. "Sustainability of Building Structures." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018.
Знайти повний текст джерелаGiddings, Michael Anthony. "The early assessment of system performance in distributed real-time systems." Thesis, Open University, 2016. http://oro.open.ac.uk/47785/.
Повний текст джерелаMalik, Husnain. "An assessment system for evaluation of driving competencies." Thesis, Queensland University of Technology, 2011. https://eprints.qut.edu.au/40902/1/Husnain_Malik_Thesis.pdf.
Повний текст джерелаMaggiore, Pierpaolo. "Energy retrofit of an office building in Stockholm: energy performance analysis of the cooling system." Thesis, KTH, Installations- och energisystem, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-190960.
Повний текст джерелаSIRen
Campbell, Alistair B. "Performance enhancement of the task assessment process through the application of an electronic performance support system." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2008. https://ro.ecu.edu.au/theses/18.
Повний текст джерелаCampbell, Alistair B. "Performance enhancement of the task assessment process through the application of an electronic performance support system." Connect to thesis, 2008. http://portal.ecu.edu.au/adt-public/adt-ECU2008.0008.html.
Повний текст джерелаAsplund, Matthias. "Wayside Condition Monitoring System for Railway Wheel Profiles : Applications and Performance Assessment." Doctoral thesis, Luleå tekniska universitet, Drift, underhåll och akustik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-60146.
Повний текст джерелаYa-TingHe and 何雅婷. "Developing the Environmental Performance Assessment System for the Existing Building in Taiwan-A study of an office building." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/34123747134006315899.
Повний текст джерела國立成功大學
土木工程學系碩博士班
99
Sustainable development has become an important issue to the world since the impact of climate change and global warming. Many countries have developed their tools for evaluating the sustainability of new and existing buildings. Compared to the newly constructed buildings, existing ones usually require higher energy consumption and present higher pollution to the environment. Despite the high ratio of existing to newly constructed buildings, only the assessment tool for the newly constructed buildings is employed in Taiwan. Therefore, there is a need to develop an assessment tool specially designed for evaluating existing buildings. By review literatures, the research purpose these objectives as follows: 1. Surveying the international sustainable building assessment tools, 2. Analyzing the development of green building assessment tool in Taiwan, 3. Investigating the importance level of expertise to the existing building factors, 4. Developing the environmental performance assessment system for the existing building in Taiwan and suggesting some improvements to the existing building. The results of the research can be summarized into four parts: 1. Reviewing the development of sustainable building assessment tools domestically and internationally, and regard the tools as the basis and factors of developing the environmental performance assessment system for the existing building in Taiwan, 2. Applying the FDM (Fuzzy Delphi Method) and interviewing with experts and develop the framework of the environmental performance assessment system for the existing building as a result, 3. Applying the AHP (Analytic Hierarchy Process) and interviewing with experts and develop the relationship within the assessment system, 4. Taking an office building as an example to test the applicability of the assessment system, and analyze the benefit after applying the improvement works to this case.
Optis, Michael. "Incorporating life cycle assessment into the LEED Green Building rating system." Thesis, 2008. http://hdl.handle.net/1828/1059.
Повний текст джерелаShari, Zalina. "Development of a sustainability assessment framework for Malaysian office buildings using a mixed-methods approach." Thesis, 2011. http://hdl.handle.net/2440/73200.
Повний текст джерелаThesis (Ph.D.) -- University of Adelaide, School of Architecture, Landscape Architecture and Urban Design, 2011
Jasiunas, Zygimantas. "Building appliances energy performance assessment." Master's thesis, 2021. http://hdl.handle.net/10451/51391.
Повний текст джерелаO consumo de energia tem vindo a crescer na União Europeia todos os anos, sendo de prever que, a curto prazo, se torne insustentável. No sentido de prevenir este cenário, a Comissão Europeia decidiu definir uma Estratégia Energética para a União Europeia, destacando dois objetivos: aumentar a eficiência energética e promover a descarbonização. Atualmente, cerca de 72% dos edifícios existentes na União Europeia não são energeticamente eficientes. Este problema motivou-nos à pesquisa e criação de soluções que permitam uma melhor avaliação do consumo energético por dispositivos elétricos em edifícios residenciais. Neste contexto, o trabalho desenvolvido nesta tese consiste no desenho de uma solução de monitorização remota que recolhe informações de consumo energético recorrendo a técnicas de intrusive load monitoring, onde cada dispositivo elétrico individual é continuamente monitorizado quanto ao seu consumo energético. Esta abordagem permite compreender o consumo de energia, em tempo real e no dia-a-dia. Este conhecimento oferece-nos a capacidade de avaliar as diferenças existentes entre as medições laboratoriais (abordagem utilizada no sistema de rotulagem de equipamentos elétricos de acordo com a sua eficiência energética) e os consumos domésticos estimados. Para tal, nesta tese exploram-se abordagens de machine learning que pretendem descrever padrões de consumo, bem como reconhecer marcas, modelos e que funções os dispositivos elétricos estarão a executar. O principal objetivo deste trabalho é desenhar e implementar um protótipo de uma solução de IoT flexível e de baixo custo para avaliar equipamentos elétricos. Será utilizado um conjunto de sensores que recolherá dados relacionados com o consumo de energia e os entrega à plataforma SATO para serem posteriormente processados. O sistema será usado para monitorar aparelhos comumente encontrados em residências. Além disso, o sistema terá a capacidade de monitorizar o consumo de água de aparelhos que necessitem de abastecimento de água, como máquinas de lavar e de lavar louça. Os dados recolhidos serão usados para classificação dos aparelhos e modos de operação dos mesmos, em tempo real, permitindo fornecer relatórios sobre o consumo energético e modo de uso dos aparelhos, com grande grau de detalhe. Os relatórios podem incluir o uso de energia por vários ciclos de operação. Por exemplo, um aparelho pode executar vários ciclos de operação, como uma máquina de lavar que consume diferentes quantidades de energia elétrica e água consoante o modo de operação escolhido pelo utilizador. Toda a informação recolhida pode ser posteriormente utilizada em novos serviços de recomendação que ajudaram os utilizadores a definir melhor as configurações adequadas a um determinado dispositivo, minimizando o consumo energético e melhorando a sua eficiência. Adicionalmente toda esta informação pode ser utilizada para o diagnóstico de avarias e/ou manutenção preventiva. Em termos de proposta, o trabalho desenvolvido nesta tese tem as seguintes contribuições: Sistema de monitorização remota: o sistema de monitorização desenhado e implementado nesta tese avança o estado da arte dos sistemas de monitorização propostos pela literatura devido ao facto de incluir uma lista aprimorada de sensores que podem fornecer mais informações sobre os aparelhos, como o consumo de água da máquina de lavar. Além disso, é altamente flexível e pode ser implementado sem esforço em dispositivos novos ou antigos para monitorização de consumo de recursos. Conjunto de dados de consumo de energia de eletrodomésticos: Os dados recolhidos podem ser usados para futura investigação científica sobre o consumo de consumo de energia, padrões de uso de energia pelos eletrodomésticos e classificação dos mesmos. Abordagem de computação na borda (Edge Computing): O sistema de monitorização proposto explora o paradigma de computação na borda, onde parte da computação de preparação de dados é executada na borda, libertando recursos da nuvem para cálculos essenciais e que necessitem de mais poder computacional. Classificação precisa de dispositivos em tempo real: Coma proposta desenhada nesta tese, podemos classificar os dispositivos com alta precisão, usando os dados recolhidos pelo sistema de monitorização desenvolvido na tese. A abordagem proposta consegue classificar os dispositivos, que são monitorizados, com baixas taxas de falsos positivos. Para fácil compreensão do trabalho desenvolvido nesta tese, de seguida descreve-se a organização do documento. O Capítulo 1 apresenta o problema do consumo de energia na União Europeia e discute o aumento do consumo da mesma. O capítulo apresenta também os principais objetivos e contribuições do trabalho. No Capítulo 2 revê-se o trabalho relacionado em termos de sistema de monitorização remota, que inclui sensores, microcontroladores, processamento e filtragem de sinal. Por fim, este capítulo revê os trabalhos existentes na literatura relacionados com o problema de classificação de dispositivos usando abordagens de machine learning. No Capítulo 3 discutem-se os requisitos do sistema e o projeto de arquitetura conceitual do sistema. Neste capítulo é proposta uma solução de hardware, bem como, o software e firmware necessários à sua operação. Os algoritmos de machine learning necessários à classificação são também discutidos, em termos de configurações necessárias e adequadas ao problema que queremos resolver nesta tese. O Capítulo 4 representa a implementação de um protótipo que servirá de prova de conceito dos mecanismos discutidos no Capítulo 3. Neste capítulo discute-se também a forma de integração do protótipo na plataforma SATO. Com base na implementação feita, no Capítulo 5 especificam-se um conjunto de testes funcionais que permitem avaliar o desempenho da solução proposta e discutem-se os resultados obtidos a partir desses testes. Por fim, o Capítulo 6 apresenta as conclusões e o trabalho futuro que poderá ser desenvolvido partindo da solução atual.
Energy consumption is daily growing in European Union (EU). One day it will become hardly sustainable. For this not to happen European Commission decided to implement a European Union Strategy, emphasizing two objectives: increasing energy efficiency and decarbonization. About 72% of all buildings in the EU are not adapted to be energy efficient. This problem encourages us to create solutions that would help assess the energy consumption of appliances at residential houses. In this thesis, we proposed a system that collects data using an intrusive load monitoring approach, where each appliance will have a dedicated monitoring rig to collect the energy consumption data. The proposed solution will help us understand the real-life consumption of each device being monitored and compare the laboratory measurements observed versus domestic consumption estimated by the energy consumption based on the EU energy efficiency labelling system. The system proposed detects device consumption patterns and recognize its brand, model and what actions that appliance is executing, e.g., program of washing in a washing machine. To achieve our goal, we designed a hardware solution capable of collecting sensor data, filtering and send it to a cloud platform (the SATO platform). Additionally, in the cloud, we have a Machine Learning solution that deals with the data and recognizes the appliance and its operation modes. This recognition allows drawing a device/settings profile, which can detect faults and create a recommendation service that helps users define the better settings for a specific appliance, minimizing energy consumption and improving efficiency. Finally, we examine our prototype approach of the system implemented for targeted objectives in this project report. The document describes the experiments that we did and the final results. Our results show that we can identify the appliance and some of its operation modes. The proposed approach must be improved to make the identification of all operation modes. However, the current version of the system shows exciting results. It can be used to support the design of a new labelling system where daily operation measures can be used to support the new classification system. This way, we have an approach that allows improving the energy consumption, making builds more efficient.