Дисертації з теми "Building information modelling and management"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Building information modelling and management".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Bengtsson, Jonas, and Mikael Grönkvist. "Performing Geographic Information System Analyses on Building Information Management Models." Thesis, KTH, Geodesi och satellitpositionering, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-208922.
Повний текст джерелаI takt med den ökade användningen av både BIM och 3D-GIS inom samhällsbyggnadsprocessen har även intresset för att sammanföra de två verktygen blivit större. En möjlighet med integration är potentialen att visualisera BIM-modeller tillsammans med andra geografiska data i 3D. En annan är att kunna genomföra rumsliga 3D-analyser på modellerna. Båda dessa går att utföra med hjälp av GIS-programvara. Denna studie utforskar hur en integration mellan BIM och GIS kan se ut. Målet är att genomföra typiska GIS-analyser i 3D på BIM-modeller. Tidigare forskning pekar mot vissa framgångar inom området genom att arbeta med det utpekade standardformatet för respektive verktyg – IFC för BIM och CityGML för GIS. Transformation mellan formaten skedde med hjälp av programvarorna Revit, FME och ArcGIS. Ett par framhållna tillämpningar av GIS-analyser valdes ut för tester på de konverterade modellerna – nätverksanalyser inomhus, siktanalyser och rumsliga analyser för 3D-byggnader. Som indata användes flera olika BIM-modeller, både sådana som tillverkats för faktisk användning och modeller som skapats för att användas som exempeldata inom programvarorna. Utifrån resultaten från det praktiska arbetet kan konstateras att en enkel, automatiserad och fullskalig integration mellan verktygen verkar ligga en bit in i framtiden. De flesta transformationerna mellan IFC och CityGML misslyckades i någon aspekt, speciellt de mer detaljerade och komplexa. I vissa testfall kunde filen inte importeras i ArcGIS, i andra saknas eller existerar oväntade geometrier även om importen lyckats. Det finns också exempel där geometrier förflyttats. Som en konsekvens av dessa problem kunde de flesta 3D-analyser inte genomföras alls eller lyckades inte ge betydelsefulla resultat. Ett fåtal av de ursprungliga analyserna gav dock positiv utdelning. Att kombinera (felaktiga) CityGML-modeller med annan rumslig data fungerade förhållandevis väl ur ett visualiseringssyfte. Både skuggvolymsanalysen och framtagandet av siktlinjer från byggnaderna gav någorlunda korrekta resultat vilket indikerar att det kan finnas en framtid gällande de tillämpningarna. Hindren för en fullskalig integration som identifierades genom arbetet delades upp i fyra olika kategorier. Den första är BIM-användning där hög kvalitet på de skapade modellerna är viktigt för korrekta slutresultat. Den andra är detaljeringsgraden där avsaknaden av gemensamma definitioner för detaljeringsgraderna ställer till problem. Den tredje kategorin är koordinat- och referenssystem där en lösning på kopplingen mellan lokala och globala system redan kan finnas på plats i en av de senare utgåvorna av IFC-formatet. Den sista och största kategorin är problematiken kring just format och programvaror där mer arbete på översättningen mellan IFC och CityGML kommer att krävas. I framtiden finns det gott om arbete att göra med dessa olika problem. Det finns också potential att utveckla egna verktyg för integrationen eller att ägna sig åt att göra andra analyser än de som valdes ut i den här studien.
Majcherek, Ewa. "Building Information Modelling in the business of architecture : Case of Sweden." Thesis, KTH, Industriell ekonomi och organisation (Inst.), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-124358.
Повний текст джерелаDave, B. A. "Developing a construction management system based on lean construction and building information modelling." Thesis, University of Salford, 2013. http://usir.salford.ac.uk/30820/.
Повний текст джерелаAlekhtyar, Mumena. "Building Information Modelling and Virtual Design and Construction : Differentiations and interaction." Thesis, KTH, Fastigheter och byggande, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231602.
Повний текст джерелаLi, Jinmin. "Integrating Building Information Modelling (BIM), Cost Estimating and Scheduling for Buildings Construction at the Conceptual Design Stage." Thesis, Université d'Ottawa / University of Ottawa, 2016. http://hdl.handle.net/10393/35292.
Повний текст джерелаAbbasnejad, Behzad. "Building information modelling adoption and implementation in construction firms: A multi-stage model." Thesis, Queensland University of Technology, 2018. https://eprints.qut.edu.au/119686/1/Behzad_Abbasnejad_Thesis.pdf.
Повний текст джерелаParsanezhad, Pouriya. "A Lifecycle Approach towards Building Information Management : Technical and procedural implications for the facility management and operations sector." Licentiate thesis, KTH, Projektkommunikation, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-164954.
Повний текст джерелаQC 20150423
Zhu, Junxiang. "Integration of Building Information Modelling and Geographic Information System at Data Level Using Semantics and Geometry Conversion Approach Towards Smart Infrastructure Management." Thesis, Curtin University, 2018. http://hdl.handle.net/20.500.11937/74945.
Повний текст джерелаCecconi, Corrado. "La strategia Building Information Modelling (BIM) per il Facility Management di un impianto sportivo/natatorio - caso di studio." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2017. http://amslaurea.unibo.it/13066/.
Повний текст джерелаAndrade, Pedro Daniel Medeiros Ferreira de. "Avaliação de benefícios da integração do BIM nas opera-ções de Facilities Management." Master's thesis, Faculdade de Ciências e Tecnologia, 2014. http://hdl.handle.net/10362/12526.
Повний текст джерелаDurante o ciclo de vida dos edifícios, muita atenção é dada aos custos de construção e projeto. BIM tem provado que os processos de construção podem ser mudados permitindo à indústria reduzir os custos e aumentar a sua produtividade. No custo global de um edifício a grande fatia dos custos não está associada à sua construção, mas antes à sua exploração e manutenção. O horizonte de projeto não é determinado em anos, mas antes em décadas. Durante esse período os edifícios degradar-se-ão naturalmente e apresentarão anomalias nos seus equipamentos e instalações. Desse modo, é ne-cessário levar a cabo procedimentos no dia-a-dia que garantam que o edifício cumprirá as exigên-cias funcionais inerentes ao seu propósito, e aumentar a sua vida útil. Num ambiente económico cada vez mais degradado a gestão e manutenção de edifício necessita de se orientar nesse sentido, eliminando desperdício nas suas operações, não só em intervenções de grande magnitude, como essencialmente na sua gestão diária. BIM apresentou uma forma de co-municar e colaborar, nunca antes pensada na indústria AEC; esse paradigma pode também ser apli-cado durante a exploração do edifício, permitindo igualmente ganhos de produtividade e eficiência na gestão da informação do edifício. Este trabalho propõe a integração de BIM nos processos de empresas de gestão de instalações, especialmente na partilha de informação entre os intervenientes. Para suportar a implementação de BIM, procede-se ao levantamento dos processos de gestão da manutenção de um caso de estudo usando o método Business Process Modelling and Notation (BPMN) avaliando as alterações que surgem empregando a metodologia Value Stream Mapping (VSM). Com a integração de BIM nos procedimentos da gestão da manutenção, resultaram ganhos de efi-ciência e produtividade assinaláveis. Permitiu a redução dos custos de operação, da variabilidade dos processos e ainda reduzir os erros humanos.
Gerrish, Tristan. "Exploring the effectiveness of BIM for energy performance management of non-domestic buildings." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/25094.
Повний текст джерелаVass, Susanna. "The Business Value of BIM : Elaborating on Content and Perspective." Doctoral thesis, KTH, Projektkommunikation, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-214617.
Повний текст джерелаFörväntningarna på digitalisering och Byggnadsinformationsmodellering (BIM) i samhällsbyggnadssektorn är höga och reflekteras i ett ökande intresse för affärsnyttan av BIM. Den praktiska och teoretiska förståelsen av innehåll och perspektivet i affärsnyttan av BIM har karaktäriserats av rationalism och positivism som upprätthållits i kommersiella syften. Denna avhandling syftar till att reflektera över, problematisera och utöka förståelsen av innehållet och perspektivet av affärsnyttan av BIM. Den upplevda affärsnyttan av BIM, de associerade utmaningarna och kostnaderna och rollen av affärsnyttan av BIM i ett bredare sociotekniskt perspektiv undersöks bland aktörer i den svenska och internationella samhällsbyggnadssektorn samt hos en stor svenskt offentlig beställare av infrastruktur. För att problematisera över och utöka förståelsen av affärsnyttan av BIM kombinerar denna avhandlingen de rationella och process orienterade teorierna inom business value of IT med den mer hermeneutiska socio-technical systems teorin. Genom att kombinera dessa två fält bidrar avhandlingen med ett socialt och kognitivt perspektiv till den teoretiska förståelsen av affärsnytta. Det teoretiska bidraget består således av teoriutveckling. För praktiker belyser avhandlingen de komplexa, multi-dimensionella och utmananande aspekterna med att implementera BIM för affärsnytta. Resan i perspektiv från positivism och rationalism mot ökad interpretivism i avhandlingen belyser också implikationerna av hur olika perspektiv får inflytande över ett forskningsfält (hegemoni) och önskar bidra med en kontrast och balans till det rationella och positivistiska perspektivet i BIM forskning. Det är också förhoppningen att avhandlingens resa i perspektiv kan inspirera framtida forskning på BIM att vidga de teoretiska vyerna.
QC 20170920
Eriksson, Michael. "BIM i förvaltningsskedet." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Byggnadsteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-19875.
Повний текст джерелаThe purpose of this study is to improve the flow of information from the design and construction phase into the facility management. This in order to make the facility managers see the advantages with BIM and to show that there is money to be saved by retrieving the information from the design and the construction phase. Earlier studies show that there actually has been quite little research done within BIM in the facility management and that the main focus has been at the design and the construction phase. The aim with the study is to specify the value of the information and to show which information facility managers use and where it can be retrieved from within the earlier phases of the construction process. The report is based on a literature study, interviews and calculations. A number of facility managers have been asked which types of information they use and designers and entrepreneurs have then been asked if these types of information can be found in the design and the construction phase. The information has been valued in two different ways. In one way the information was valued by comparing the cost between updating existing information or recreate the same type of information. The other way of valuing the information was to find out the worth of information by using key figures (SEK per square meter) and the list of information that facility managers use, which was made up from the interviews. The first way of valuing shows that the cost of producing as built drawings (A) in the facility management cost as much as keeping the same type of information updated for at least 18years and as most 50years. Almost the same goes for a BIM-model. Only there the difference is that the cost of producing a BIM-model focused on as built drawings (A) in the facility management cost as much as keeping the same type of information updated for at least 22years and as most 58years. The other way that the information was valued shows that less than 25% of the information that can be found in the design and/or construction phase is worth circa 10% of the projecting fee.
Zanni, Maria Angeliki. "Communication of sustainability information and assessment within BIM-enabled collaborative environment." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/24680.
Повний текст джерелаLindblad, Hannes. "Lost in Translation : A case of BIM implementation at a large public client." Licentiate thesis, KTH, Projektkommunikation, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-208636.
Повний текст джерелаTekniken Byggands Informations Modellering (BIM) introduceras just nu i byggbranschen. Denna bransch beskrivs ofta som varande fragmenterad med låg produktivitet samt bristande innovationskraft. BIM beskrivs som ett nytt paradigm för denna bransch, möjliggörande interorganisatoriskt sammarbete, ökad kvalitet och samtidigt minskande kostnader. Däremot har BIM ännu inte anammats på bred front. För att öka implementeringstakten har statliga beställarorganisationer beskrivits som de aktörer som behövs för att initiera och driva implementeringen av BIM. Dock har tidigare forskning inte fokuserat på beställarperspektivet kring sådana initiativ. I denna licentiatavhandling presenteras en fallstudie av BIM implementeringen på den största infrastrukturbeställaren i Sverige. Denna organisation implementerar BIM både för att gynna den egna organisationen men också för att öka produktiviteten och innovationstakten i intrastrukturbranschen som helhet. Med syfte att öka förståelsen kring beställarrollen i förhållande till teknikdrivna förändringsprocesser studeras denna förändringsprocess som ett empiriskt exempel. Denna fallstudie analyseras utifrån ett teoretiskt ramverk med inspiration tagen från Actor-Network Theory och Sociology of Translation. Utifrån denna analys beskrivs översättningsprocesser där nyckelaktörer identifieras och försöks knytas till att använda BIM. Analysen visar på ett komplext nätverk av aktörer kopplat till implementeringen i fråga. Istället för ett enskilt BIM koncept hittas ett flertal samtidiga, och stundtals motsägelsefulla tolkningar av BIM som alla samtidigt översätts i organisationen. Denna licentiatavhandling problematiserar beställarrollen i relation till initiering av förändring inom ett aktörsnätverk. Det huvudsakliga sättet genom vilket aktörer knyts till att använda BIM har i det studerade fallet varit genom utveckling av nya kravdokument. Denna strategi har däremot varit problematisk då dessa krav inte accepterats som tänk inom ett flertal byggprojekt. Istället visar resultatet av denna studie på vikten av beställarorganisationer som varande förhandlare, inte endast viktiga för att upprätta efterfrågan för en ny innovation.
QC 20170614
Silva, Pedro Mota Cardoso Neves da. "Aplicação do BIM à gestão de infraestruturas de abastecimento de água." Master's thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/17855.
Повний текст джерелаBIM – Building Information Modelling apresenta-se como a ferramenta do futuro no sector AEC, ao fomentar toda uma nova metodologia de trabalho envolvendo todas as fases do ciclo de vida de um edifício. Apoiado por uma capacidade gráfica sem precedentes no sector da construção e por uma base de dados que possibilita o armazenamento de informação desde as fases iniciais do projeto, o conceito BIM aparece cada vez mais ligado ao conceito de Facility Management devido às vantagens que este acarreta para a gestão de instalações. O presente trabalho desdobra-se numa tentativa de contribuir para a implementação do conceito de Facility Management (FM) em Portugal, associada ao Building Information Modelling. Sabendo-se que o mercado da construção de novos edifícios e infraestruturas tem vindo a abrandar nos últimos anos, o desafio de hoje envolve a gestão e manutenção de edifícios já existentes. Para o caso de estudo, foram escolhidos dois edifícios de abastecimento de água, tendo também em consideração o equipamento integrado nestes. Foi desenvolvido um modelo tridimensional de cada um dos edifícios, assim como dos equipamentos existentes, usando o Autodesk Revit 2016. De seguida, foram introduzidas todas as informações disponíveis para cada elemento no modelo, criando assim uma base de dados onde a informação é armazenada. Em seguida, utilizando a tecnologia Construction Operation Building information exchange, a base de dados foi exportada para ajudar os operadores das fases de gestão e manutenção. Por ultimo, foi criado um fluxo de trabalho através do software Dynamo, a fim de construir um método para atualizar as informações presentes no modelo através da alteração nas folhas de cálculo COBie. O modelo foi ainda integrado na plataforma A360, com o objetivo de criar um novo tipo de interface para facilitar a interação entre a equipa de operação.
BIM – Building Information Modelling presents itself as tool for the future in Architecture, Engineering and Construction (AEC) sector, stimulating a whole new work methodology involving all the stages in a buildings life cycle. Supported by an unprecedented graphics capabilities and a database that allows information storage from the early stages of the project, the BIM concept appears increasingly linked with the concept of Facility Management due the advantages that this entails for operating and maintaining of buildings. The present work intends to contribute to the implementation of the Facility Management (FM) concept in Portugal, associated with Building Information Modelling. Knowing that the construction market for new buildings and infrastructures has been slowing down in the last years, the challenge nowadays involves the management and maintenance of the existing buildings. For the case study, two water distribution buildings were selected and studied, including the equipment integrated on them. A three-dimensional model was developed using Autodesk Revit 2016, in which were introduced all the information available for each element in the model, creating a database where the information is stored. Then, using Construction Operation Building information exchange, the database was exported helping out those who work in the operation and maintenance phase. Finally, it was created a workflow through Dynamo software in order to build a method to update the information in the model through the modification in the COBie spreadsheets. The model was integrated in A360 platform, aiming to create a new kind of interface that facilitate the interaction between the operation staff.
Asklund, Andersson Mathias. "En konservativ bransch i utveckling - Är BIM lösningen?" Thesis, Linköpings universitet, Kommunikations- och transportsystem, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-160501.
Повний текст джерелаFerrari, Fernanda Andrade. "A introdução da modelagem da informação da construção em um banco público brasileiro." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/3/3153/tde-23082016-152604/.
Повний текст джерелаDue to its outstanding performance in housing and infrastructure construction financing market, Caixa Econômica Federal (Caixa) is a bank of great importance in the Brazilian Construction and Design industry. Caixa maintains a technical department that, among other activities, perform technical feasibility analyses, and verify the budgetary and financial development of construction projects. Currently, the project analysis process is manual, time-consuming and error-prone. In this sense, the present study aims to analyse the introduction of Building Information Modelling in the technical feasibility analyses process, carried out by engineers and architects. Firstly, a survey was conducted to perform an intraorganizational assessment of Caixa\'s technical department, in order to identify aspects relevant to change management. Secondly, in this study case, the motivations, the desired benefits and potential barriers to the implementation of this innovation were investigated. In addition, a workshop was conducted with construction and design professionals to verify the suitability and acceptance of the preliminary proposals of tools and modelling guidelines. Based on this study presented in three published scientific papers, Caixa can be considered an important diffusion vector of Building Information Modelling practices in the Brazilian construction and design industry. In addition, the proposition of new tools and modelling guidelines could effectively be appropriate to enhance its design practices. Furthermore, the intraorganizational change required for implementing innovations in the Caixa technical department proved to be feasible if provided with a favourable environment in which managers stimulate, plan and support possible changes. Finally, the intended contribution of this research is to encourage other initiatives and contribute to spreading additional practices related to Building Information Modelling in the Brazilian construction and design industry.
Antoh, Robert. "An Analysis of the Value Propositions for Integrated 4D BIM-GIS Adoption for Construction supply Chain Management : Assessing Digital Transformation in the Swedish AEC Industry." Thesis, KTH, Fastigheter och byggande, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-297902.
Повний текст джерелаLogistik och försörjningskedjan inom arkitektur, teknik och konstruktion (ABE) kan ses som ett samordnat samarbete med överhängande ledningsrisker. Riskerna som hanteras kan mildras av Byggnadsinformationsmodellering (BIM) och Geografiskt informationssystem (GIS), som är två digitalt distinkta transformativa verktyg som revolutionerat och påskyndat ABE-sektorn de senaste åren. Många vinster har uppnåtts med avseende på kapaciteten av BIM och GIS, vilket har möjliggjort ett samarbetsflöde som minimerat dataförlust och minskat ineffektiviteten i byggandet. Under det senaste decenniet har den mest vetenskapliga litteraturen om BIM- och GIS-integration för ledning av försörjningskedjan fokuserat på samordning och visualisering för att förbättra effektiviteten i försörjningskedjan. BIM optimerar visualisering och hantering av data, relaterat till specifika projekt, medan GIS samordnar och hanterar data relaterat till projektets omgivning. En integrerad BIM-GIS-antagande för konstruktionsledningen av försörjningskedjan (CSCM) erbjuder värdeförslag för klient- och beställarorganisationer, eftersom information / data sömlöst delas mellan dem för att kunna guida beslutsfattandet i varje fas av byggprojektet. Emellertid har ingen detaljerad studie hittills genomförts om bedömningar av värdeskapandet som 4D BIM-GIS ger till ABE-sektorn när de används för CSCM. För att fylla denna kunskapslucka syftar denna studie till att identifiera och prioritera värdeförslag till 4D BIM-GIS-antagande för CSCM i den svenska ABE-sektorn. Baserat på de reflekterande uppfattningarna och utvärderingarna från ABE-sektorn, visar studien de olika åsikterna från de nuvarande aktiva användare och de som ännu inte har antagit 4D BIM-GIS för CSCM. ”Tidsbesparingar,” Ökad effektivitet och produktivitet” och ”Förbättrad kommunikation och informationsdelning” rankades som de främsta drivkrafterna för 4D BIM-GIS-antagande. Studien rekommenderar utbildning på företagsnivå som en central faktor för att bekanta sig med de nya teknikerna som kombinerar BIM och GIS i ABE-sektorn.
Souza, Flávia Rodrigues de. "A gestão do processo de projeto em empresas incorporadoras e construtoras." Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/3/3146/tde-11052016-115144/.
Повний текст джерелаThe discussion about BIM (Building information Modelling) implementation has remained on the agendas of construction companies worldwide in recent years; however, in the Brazilian context, the gap between the industry strategy and few companies which have decided to implement BIM autonomously has been the main aspect that draw attention. Assuming BIM as a technological innovation, which carries with it changes, it is fundamental to analyse and adapt the design and construction processes. In this context, the thesis aims propose a set of Guidelines to Manage the Design Process of Brazilian Real Estate Development Companies. The Guidelines has taken the Design Management as a strategic process which must facilitate and integrate information flow among the Construction Project agents. In order to achieve the objective of Thesis, Case Studies have carried out in order to diagnose the design management current practices in the Brazilian Real Estate Development Companies. Aiming to discuss the Design managers\' responsibilities in contexts where BIM is applied, Focus Groups were organized and Design Managers, BIM specialists and also Academics have participated in the discussions sections. In addition, the research methodology have included a Case Study focusing on the BIM implementation in United Kingdom construction industry. As results and Guidelines, the Design Management Modeling in BIM context, followed by the Restructuring Planning are proposed. The Restructuring Planning was defined specifically for Real Estate Development Companies and aims to propose structured way, comprehending processes which should be re-designed and a set of steps for driving the necessary changes in order to use Design Management Guide in BIM context are proposed.
Blom, Daniel. "Kopplingen mellan Livscykelkostnader och Building Information Modelling." Thesis, KTH, Industriell ekonomi och organisation (Inst.), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-33618.
Повний текст джерелаThis thesis has investigated the possibilities of using Building Information Modelling (BIM) for Life Cycle Cost Analys (LCCA). It describes LCC and how BIM can be used for LCC and for data quality control. It also shows how a tool that calculates the LCC directly from a building model can be designed. Being able to highlight the consequences of various design solutions and make qualitative LCCA, results in better solutions and awareness off the future facility management(FM) -costs. For a builder who also is responsible for the operational phase these analysis can lead to significantly lover costs. Statsbygg currently manages 2.6 million square meter spread over 2300 buildings. Lower FM-costs implies savings not only for the company itself, but for the Norwegian society as well. Therefore LCCA is an important decision basis for Statsbygg. LCCA requires tools that provide adequate results, and for this purpose the recent developments in BIM are interesting. BIM enables operational procedures and analysis that previously not was possible and it has potential to be used within the LCCA. The purpose of this work was first to describle and analyze the possibility of using BIM to make LCCA and then to show how a solution for calculating can be designed. The work was based only in qualitative methods through interviews and being a part of developers enviroment. It was chosen to interview employees at Statsbygg to know more about LCC. They have worked with development and methods since 1982 and have extensive expertise in the field. They are one of Norway’s largest property developers, wich also manages its buildings and therefore LCCA is important. It was also chosen to focus on cleaningcosts wich is one of the costs in the Norwegian standard NS 3454 for LCCA. Cleaning was chosen because it is a major cost in the FM-phase. Knowledge of BIM was obtained beeing part of the development enviroment at Jotne EPM-Technology in Oslo who has worked with open standard data formats and BIM since 1985. As part of their enviroment the works with the cleaningcost-tool proceed. The conclusion of this work is that use of BIM for LCCA can obtain better quality of the final product by more opportunities for optioneering and quality controls. Moreover, it may provide more accurate LCCA through master data management systems and the ability to plan in more detail. To realize all benefits it is necessary to develop more tools for FM and LCCA based on open standard data formats. Furthermore, it is necessary to develop knowledge databases for LCC, maintenance, energy and cleaning based on open standard data formats.
Mayouf, Mohammad Adnan Amin. "Improving the delivery of building performance using building information modelling (BIM)." Thesis, Birmingham City University, 2016. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.705054.
Повний текст джерелаLiu, Zhen. "Building Information Modelling (BIM) aided waste minimisation framework." Thesis, Loughborough University, 2014. https://dspace.lboro.ac.uk/2134/14971.
Повний текст джерелаRuokamo, S. (Simo). "Single shared model approach for building information modelling." Doctoral thesis, Oulun yliopisto, 2019. http://urn.fi/urn:isbn:9789526223704.
Повний текст джерелаTiivistelmä Rakentamisen tietomallinnuksen (BIM) nykyisenä tiedonjakamisen käytäntönä on hajautettu tietojärjestelmä, joka perustuu konversioihin. Konversiot ovat ongelmallisia tiedon häviämisen, ristiriitojen ja päällekkäisyyksien vuoksi. Tämän tutkimuksen hypoteesit olivat: i) konversiovapaa tiedonjakaminen on mahdollista, ii) etuja on saavutettavissa ilman konversioita tapahtuvassa tiedonsiirrossa ja iii) laajemmalle teolliselle käytölle ei ole periaatteellisia esteitä. Konversiovapaa tiedon jakaminen edellyttää yhden dataformaatin käyttöä. Alati kasvavien tietomallien koko vaatii tiedon järjestämismenetelmän, joko mahdollistaa osamallit. Datan ristiriidat ja päällekkäisyydet voidaan estää yhden jaetun mallin menetelmällä. Informaatio on parhaiten kaikkien osapuolien saatavilla, kun jaettu malli sijoitetaan pilvipalveluun. Kun tietomallia käsitellään vain web-palvelun rajapintafunktioilla, tiedon eheys ja kelpoisuus säilyvät. Tietoteknisten ratkaisujen kelpoisuus voidaan viime kädessä osoittaa vain toimivilla ohjelmistoilla. Konversiovapaan menetelmän testausta varten kehitettiin vaadittavat ominaisuudet sisältävä ohjelmistokehityspaketti (SDK), joka on edellytys sovellusten yhteensopivuudelle. Kolme sovellusta eli 3DTrussme, Leonardo ja Viewer ohjelmoitiin SDK:n avulla. Ohjelmointirajapinta sisälsi tarvittavat toiminnallisuudet tiedonjakamiseen, ja se toteutettiin pilvipalveluna. Testiajossa Leonardo-sovelluksella mallinnettiin seinät, 3DTrussmellä suunniteltiin naulalevyristikot ja Viewer-sovelluksella tarkasteltiin mallia. Kaikki kolme sovellusta käyttivät samaa jaettua mallia pilvipalvelussa. Suoritetussa testissä kaikki informaatio jaettiin ilman konversioita ja tallennettiin vain kerran. Ilman konversioita ja päällekkäisyyksiä saavutettiin parempi datan eheys ja integraatio. SDK:n avulla uudet sovellukset pystyivät liittymään yhden jaetun mallin ekosysteemiin ilman teknisiä esteitä. Toisaalta, ilman merkittäviä muutoksia nykyiset BIM sovellukset eivät ole yhteensopivia. Testiajossa suorituskyky oli hyväksyttävä, mutta todellisuudessa mallien koko sekä sovellusten ja käyttäjien lukumäärä ovat paljon suurempia. Tutkimus osoitti, että konversiovapaa yhden jaetun mallin menetelmä voi olla seuraava BIM-kehityssuunta ja vaihtoehto nykyisille tiedonsiirtoratkaisuille, jotka käyttävät erillisiä tiedostoja, konversioita ja linkkejä
Jordán, Palomar Isabel. "Protocol to manage heritage-building interventions using Heritage Building Information Modelling (HBIM)." Doctoral thesis, Universitat Politècnica de València, 2019. http://hdl.handle.net/10251/128416.
Повний текст джерела[CAT] Els projectes d`arquitectura patrimonial comporten treballs col·laboratius entre diferents agents tals com arquitectes , enginyers ,arqueòlegs , historiadors, restauradors , propietaris , etc. Tradicionalment cada disciplina ha treballat de manera independent generant informació dispersa. El flux de treball en els projectes patrimonials presenta problemes relacionats amb la desorganització de processos, la dispersió d'informació i l'ús d'eines obsoletes. Diferents organitzacions promouen fer servir mètodes innovadors per a tractar de resoldre aquests problemes i fer del patrimoni cultural un motor de desenvolupament socioeconòmic. BIM (Building Information Modelling) s'ha postulat com una metodologia adequada per millorar la gestió del patrimoni arquitectònic. L'aplicació de BIM a construccions històriques, anomenada HBIM (Heritage BIM), ha demostrat tenir múltiples avantatges per gestionar projectes patrimonials. No obstant això, la literatura científica posa de manifest la necessitat de seguir investigant en els processos dels projectes patrimonials, la implementació pràctica de HBIM, la simplificació de la laboriosa tasca de modelatge HBIM i la documentació dels projectes HBIM. L'objectiu d'aquesta investigació és el desenvolupament d'un protocol que ordeni la gestió de projectes patrimonials usant HBIM i el disseny d'una plataforma web que sincronitzi la informació patrimonial. DSR (Design Science Research) és el mètode d'investigació utilitzat per desenvolupar aquest protocol que ajudi a millorar el flux de treball en els projectes patrimonials. Les tècniques d'investigació utilitzades han estat l'anàlisi documental, entrevistes semi-estructurades i grups focals. També es van analitzar els processos HBIM i es van estudiar els requeriments dels agents patrimonials. HBIM es va proposar com el model virtual que acull la informació patrimonial i que articula els processos. Com a resultat, es va desenvolupar el protocol BIMlegacy, dividit en vuit fases, contemplant a tots els agents que participen en projectes patrimonials. Aquest protocol es va aplicar en el cas d'estudi real de Fixby Hall, a Huddersfield (Regne Unit), i els seus resultats van ser exposats en un workshop interdisciplinari per validar i millorar el protocol. Basat en aquest protocol, el grup de recerca va desenvolupar la plataforma BIMlegacy com a eina per poder dur a terme aquest flux de treball on agents interdisciplinaris poden unificar i sincronitzar la informació patrimonial. Aquest innovador sistema en el núvol connecta la base de dades intrínseca dels programes HBIM amb les bases de dades patrimonials fent servir un plug-in per Revit d'Autodesk, un web API, un servidor SQL i un portal web. La plataforma BIMlegacy es va dissenyar com un web de treball, però també com un web de difusió cultural on el públic generalista pot accedir a certa informació dels monuments. El protocol i la plataforma BIMlegacy van ser utilitzats per gestionar el projecte de Registre de Sant Joan de l'Hospital. El protocol i la plataforma i els resultats del projecte de Sant Joan van ser exposats en un grup focal amb professionals per a la seva avaluació científica a València. La contribució teòrica d'aquesta investigació ha estat el descobriment de problemes en el modelatge HBIM que mai havien estat especificats abans, beneficis del HBIM (per exemple l'ús de plataformes en línia, el filtrat d'informació en sistemes HBIM, la integració de la divulgació cultural amb HBIM) i requeriments per implementar HBIM en la pràctica, com ara la necessitat d'un protocol intuïtiu i simple on oferir entrenament específic als agents no tècnics. Les contribucions pràctiques al coneixement han estat la creació del protocol BIMlegacy amb els agents patrimonials i la integració de processos tradicionals,el disseny de la plataforma BIMlegacy amb la sincronització de la informació a temps real que permet que els agents que no son tècnics pugu
[EN] Heritage architectural projects involve collaborative work between different stakeholders, e.g. architects, engineers, archaeologists, historians, restorers, managers, etc. Traditionally, each discipline works independently, generating dispersed data. The workflow in historic architecture projects presents problems related to the lack of clarity of processes, dispersion of information, and the use of outdated tools. Different heritage organisations have showed interest in innovative methods to resolve those problems. Building Information Modelling (BIM) has emerged as a suitable computerised system to improve the management of heritage projects. BIM application to historic buildings, named Heritage Building Information Modelling (HBIM), has shown benefits in managing heritage projects. The HBIM literature highlights the need for further research in terms of the overall processes of heritage projects, its practical implementation, the need of simplifying the laborious modelling task, and need for better standards of cultural documentation. This investigation aims to develop a protocol for heritage project processes using HBIM and an online work platform prototype where interdisciplinary stakeholders can unify and synchronise heritage information. Design Science Research (DSR) is adopted to develop this protocol. Research techniques used include documentary analysis, case studies, semi-structured interviews, participative workshop, and focus groups. An analysis of HBIM processes and a study of heritage stakeholders' requirements were performed through documentary analysis and semi structured interviews with stakeholders involved with relevant monuments. HBIM is proposed as the virtual model which will hold heritage data and will articulate processes. As a result, a simple and visual HBIM protocol, BIMlegacy, was developed. It is divided in eight steps and it contemplates all the stakeholders involved. BIMlegacy was applied in the Fixby Hall case study and its results were evaluated in a workshop with interdisciplinary stakeholders. An online work platform prototype, also named BIMlegacy, was developed, where interdisciplinary stakeholders can unify and synchronise heritage information. This innovative in-cloud system connects the intrinsic HBIM software database with heritage documentary databases using a Revit Autodesk Plug-in, a web Application Program Interface, a Structured Query Language server, and a web portal. BIMlegacy is an online platform to facilitate working but also a cultural diffusion web where general visitors can access to the information of the monuments. The BIMlegacy protocol and platform were implemented in two case studies Fixby Hall in Huddersfield (United Kingdom) and San Juan del Hospital in Valencia (Spain). BIMlegacy and the results of San Juan project were revealed in a workshop and in a focus group with external professionals for its evaluation. This research contributes within the theoretical knowledge highlighting modelling issues that were unknown before, benefits of using HBIM (a.e. the use of online platforms, filtering the information in HBIM database systems, the integration of cultural divulgation with HBIM) and needs in terms of implementing HBIM in practice such as the importance to have a simple and intuitive protocol to be useful and that the non-designer stakeholders require specific HBIM training. The practical contributions are the creation of the BIMlegacy protocol with the list of stakeholders and processes, the design of the BIMlegacy platform with the synchronisation of information in real time allowing the non-technical stakeholders to actively participate in HBIM models, the use of HBIM as management system, and the benefit for society and local communities since the rigorous information uploaded by professionals will be accessible to the public.
Jordán Palomar, I. (2019). Protocol to manage heritage-building interventions using Heritage Building Information Modelling (HBIM) [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/128416
TESIS
Qirushi, Andon. "Building Information Modelling (BIM) Effectiveness in Performing Life Cycle Assessment of Building." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2014. http://amslaurea.unibo.it/7081/.
Повний текст джерелаNaim, Abdullah Abdulrahman Abdullah Al. "An investigation of building information modelling implementation in KSA." Thesis, University of Wolverhampton, 2018. http://hdl.handle.net/2436/621890.
Повний текст джерелаLong, Jianghua. "Computer-integrated information modelling for design of building structures /." View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202004%20LONG.
Повний текст джерелаIncludes bibliographical references (leaves 223-232). Also available in electronic version. Access restricted to campus users.
Quintana, Samer. "Building integrated photovoltaic (BIPV) modelling for a demo site in Ludvika based on building information modelling (BIM) platform." Thesis, Högskolan Dalarna, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:du-29078.
Повний текст джерелаMendez, Ronald Osiris. "The building information model in facilities management." Link to electronic thesis, 2006. http://www.wpi.edu/Pubs/ETD/Available/etd-050406-153423/.
Повний текст джерелаBavafa, M. "Enhancing information quality through building information modelling implementation within UK structural engineering organisations." Thesis, University of Salford, 2015. http://usir.salford.ac.uk/36900/.
Повний текст джерелаSmith, Robert Adamson. "Design centric information and process modelling for integrated building design." Thesis, University of Nottingham, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.431867.
Повний текст джерелаKöseci, Firat Can. "Integrated Life Cycle Assessment (LCA) to Building Information Modelling (BIM)." Thesis, KTH, Fastigheter och byggande, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231749.
Повний текст джерелаBIM (Building Information Modelling) och LCA (Life Cycle Assessment) ligger i kärnan av byggprojekt. LCA är ett nyckelverktyg för hållbarhetsarbete i byggbranschen och en förbättrad LCA-process kan uppnås i och med att tillämpa BIM-verktyg. BIM bjuder på många nyttor däremot detta arbete fokuserar på nyttan som BIM kan ge till LCA-processen. Därmed är forskning på grunden till Bim-baserad LCA-process och datas integrations- och konverteringsförmågan ytterst viktiga för detta arbete. LCA-verktyg One Click LCA och Tally och dess tillägg till CAD-mjukvaror har utvalts för att jämföra resultat vars indata är baserat på olika EPD-databaser (Environmental Product Declaration). För att iaktta skillnader i LCA-resultat, har LCA-processen gjorts med dessa LCA-verkytg. Indata, systemgränser och LCA-definitionsområde var samma för båda LCA-processer. LCA-resultat producerat av båda LCA-verktyg har jämförts utifrån klimatavtrycksperspektiv (Global Warming Potential) för materialframtagandesskede. One Click LCAs GWP-värden har importerats i en Solibri-modell för projektet. Slutligen har LCA-resultat av en Bim-baserad process jämförts med resultat av en klassisk LCA process. Påverkan av geografiskt anpassade EPD-databaser är avgörande för LCA-resultat. Materialframtagandesskede har störst miljöpåverkan i förhållande till andra livsskede. Semantisk detaljnivå av Solibri-modellen är avgörande för identifiering av för- och nackdelar av datas integrations- och konverteringsförmågan. Datainteraktionstyper studerade i BIM-baserade LCA-processer klassas som kollaborativ interaktionstyp. Integrations- och konverteringsförmåga av både BIM-baserade LCA-processer utvärderades på en hög nivå gällande förbättrade resultat, effektivitet och resultatkännslighet. Utöver dessa har BIM-baserade LCA-processer en förbättrad användbarhet och är mer tid- och resurseffektiva, vilka är huvudskillnader från en LCA-process utfört på klassiskt sätt.
Kaehkoenen, Kalle Esa Eelis. "Modelling activity dependencies for building construction project scheduling." Thesis, University of Reading, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.336061.
Повний текст джерелаManikanti, Murali Krishna. "Building Information Modelling for rehabilitation projects of historic buildings. A case study on building pathologies." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021.
Знайти повний текст джерелаHassan, Tarek M. "Simulating information flow to assist building design management." Thesis, Loughborough University, 1996. https://dspace.lboro.ac.uk/2134/6996.
Повний текст джерелаLundvall, Anton, and Joakim Östberg. "BIM-modellens outnyttjade egenskaper på byggarbetsplatsen : Hur skapas rätt förutsättningar?" Thesis, KTH, Byggvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-174358.
Повний текст джерелаThis thesis explores the potential of the BIM-models available at today's construction sites. There are few projects that actively use BIM on the construction sites, despite the fact that BIM offers efficient solutions in areas such as visualization, coordination and quality control. This report aims to highlight the potential of BIM during the production phase and to analyze the difficulties that exist when production staff wants to use the BIM model. The long term goal of this report is to promote use of BIM in the production phase. In this report, parts of the BIM-model of Skanska and Vasakronan collaborative project Klara C, is adapted so that it can be used from a handheld device. Positive effects from active use of BIM-models are shown with the tools and BIM-models that are available today. In order to influence the quality and setup of the BIM-model, which is produced during the design stage, it is of great importance that all potential applications of the model is taken in to account. The conclusion is summarized in a number of questions that planning staff should keep in mind in order to promote value-adding use of BIM. What benefits does the model bring the specific project? E.g. Coordination, time planning or visualization. How will the model be used by the staff? E.g. What kind of unit? (E.g. Tablet or PC) What is required from the model? E.g. Level of detailing, parameters. What work- and information flows are required? E.g. How is the model/models updated and delivered. Is the application user friendly? E.g. Is additional, supporting education required?
Lim, Bobby Ting Chuan. "Causal modelling construction project performance." Thesis, Heriot-Watt University, 1987. http://hdl.handle.net/10399/1011.
Повний текст джерелаFragos, Serafeim. "Behavioural modelling in management and accounting information systems." Thesis, Lancaster University, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.483621.
Повний текст джерелаJohnston, Alexander. "Modelling response building maintenance problems with a local authority." Thesis, University of Glasgow, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.324253.
Повний текст джерелаZhang, Dan, and 張丹. "An analysis of building information modelling (BIM) implementation from a planned behavior perspective." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2015. http://hdl.handle.net/10722/210190.
Повний текст джерелаGuiney, Andrew, and aguiney@smsmt com. "Information Technology Project Management Team Building for Project Success." RMIT University. Graduate School of Business, 2009. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20100122.121228.
Повний текст джерелаBehzad, Pilehchianlangroodi. "Change management with building information modeling : a case study." Thesis, University of British Columbia, 2012. http://hdl.handle.net/2429/42130.
Повний текст джерелаAlwash, Adam. "Development of Collaborative Contractual Framework for Building Information Modelling Enabled Construction Projects." Thesis, Curtin University, 2020. http://hdl.handle.net/20.500.11937/79909.
Повний текст джерелаShigaki, Jeferson Shin-Iti. "Understanding the context for the implementation of Building Information Modelling in engineer-to-order prefabricated building systems." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2016. http://hdl.handle.net/10183/179454.
Повний текст джерелаCoordination challenges caused by the lack of integration between design, production and assembly in companies that deliver engineer-to-order (ETO) prefabricated building systems have resulted in the growing adoption of information technologies. Although Building Information Modelling (BIM) tools have been used in the construction industry for several years, many firms have not been able to fully implement them and take advantages of BIM integrated workflows. By contrast, robust technology infrastructures developed in the manufacturing sector, such as those employed in Product Lifecycle Management (PLM), represent new opportunities to establish better connections between digital tools which are necessary for the development of sophisticated engineering products, and planning and controlling production systems in complex environments, such as ETO prefabricated building systems. The aim of this investigation is to understand the context of BIM implementation in this type of firm. Design Science Research was the methodological approach adopted in this investigation A set of empirical studies were conducted in a Steel Fabricator company from Brazil. Those studies enabled the identification of challenges at project and organizational level by showing that product information contained in BIM models could be reused downstream in the value chain for different purposes, such as engineering analysis, clash detection, simulation of logistics and assembly operations. Therefore, integrated solutions should be co-developed by team members from different functional departments. This would be the first step for the transition from the current utilization of BIM functions towards the envisioned BIM-PLM environment. A roadmap and a set of guidelines for implementation, grounded on Socio- Technical Systems and Technology Roadmapping approaches, have been proposed to support the creation of a vision for technology management. In order to do so, this investigation provides the settings to understand the implementation context and critical factors related to the adoption of integrated digital technologies.
Van, Schoor Christiaan de Wet. "Building blocks for supply chain management a study of inventory modelling /." Pretoria : [s.n.], 2005. http://upetd.up.ac.za/thesis/available/etd-10192006-125907.
Повний текст джерелаMaijanen, K. (Karri). "Building inter-organizational trust by implementing information security management system:a review from trust building perspective." Master's thesis, University of Oulu, 2016. http://urn.fi/URN:NBN:fi:oulu-201612033197.
Повний текст джерелаYritysten välinen luottamus on yhä tärkeämpää toimitusketjuihin osallistuvien organisaatioiden keskuudessa, missä uhat syntyvät yritysten tietoturvakontrollien ulkopuolelta. Sama ongelma kohdataan kyberturvallisuudessa, missä uhkataso kasvaa muutoksista organisaatiorajojen ulkopuolella. Jokaisen toimitusketjuun osallistuvan on suojauduttava. Luottamuksen rakentamisen tehtävä on kaikkien jäsenien yhteinen asia luottamusverkostossa. Toimitusketjuun osallistuvien on rakennettava organisaatioiden välinen luottamus ennen liiketoiminnan aloittamista. Tässä tutkimuksessa tarjotaan keinoja kehittää organisaatioiden välistä luottamusta tietoturvallisuuden hallintajärjestelmän toteuttamisessa. Tietoturvallisuuden hallintajärjestelmä koostuu prosessien, dokumentaation, toimintojen ja resurssien yhdistelmästä, mitkä yhdessä turvaavat tietovarannot organisaation sisällä. Se on koostettava tukemaan liiketoiminnan strategisia tavoitteita ja täyttää valitut kriteeristöt. Koska tietoturvallisuuden hallintajärjestelmiä sertifioidaan eri tavalla, sekä eri tarkoituksia varten, niin sertifioitu standardi ei itsessään takaa turvallisia liiketoimintaprosesseja, vaan se toimii hyvänä lähtöpisteenä luottamuksen rakentamiselle. Tässä tutkimuksessa sovellettiin kirjallisuuskatsausta yritysten välisten luottamusta edistävien ja estävien elementtien löytämiseksi, mitä tietoturvallisuuden hallintajärjestelmän toteutuksessakin voitaisiin soveltaa. Tutkimus toteutettiin rajatulla alueella tietojenkäsittely-, käyttäytymis-, sekä hallintotieteiden yhtymäkohdassa. Tutkimus löysi useita elementtejä (102), mitkä huomioimalla tietoturvallisuuden hallintajärjestelmässä voidaan vaikuttaa yritysten välisen luottamuksen rakentamiseen. Löydökset jaoteltiin ISO/IEC 27001 (2013) tietoturvallisuuden hallintajärjestelmän toteutusaskelien mukaisesti, jotta tulokset tukisivat parhaiten tietoturvallisuuden asiantuntijaa konkreettisella tasolla. Tutkimuspapereita ei ole yhtään, tai niitä on hyvin rajoitetusti missä tietoturvallisuuden hallintajärjestelmän ja yritysten välisen luottamuksen rakentaminen yhdistetään. Monitieteinen tietoturvan ilmiö yhdistettynä yritysten välisen luottamuksen rakentamiseen vaatii enemmän huomiota tiedeyhteisöltä. Tietoturvallisuutta kouluttavien oppilaitosten tulisi kehittää tietoturvallisuuden kurssitarjontaansa tukemaan monitieteellistä lähestymistapaa ei vain oman tutkimusalan näkökulmaa, jotta teollisuus saisi sopivampia resursseja käyttöönsä
Oti, Akponanabofa Henry. "Building information modelling for sustainability appraisal of conceptual design of steel-framed buildings." Thesis, University of Nottingham, 2014. http://eprints.nottingham.ac.uk/14335/.
Повний текст джерелаDe, Benedictis Maria Paola. "Historic Building Information Modelling: il caso della Rocca di San Felice sul Panaro." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016.
Знайти повний текст джерелаMeloni, Giulia. "Il Building Information Modelling per la direzione lavori e la progettazione della sicurezza." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.
Знайти повний текст джерела