Дисертації з теми "Building design review"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-25 дисертацій для дослідження на тему "Building design review".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Mok, Siu-kin. "A review of Hong Kong building design and town planning policies to improve air quality /." View the Table of Contents & Abstract, 2005. http://sunzi.lib.hku.hk/hkuto/record/B34737959.
Повний текст джерелаMok, Siu-kin, and 莫肇堅. "A review of Hong Kong building design and town planning policies to improve air quality." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2005. http://hub.hku.hk/bib/B45013172.
Повний текст джерелаFarah, Toni E. "Review of current estimating capabilities of the 3d building information model software to support design for production/construction." Link to electronic thesis, 2005. http://www.wpi.edu/Pubs/ETD/Available/etd-082305-165125/.
Повний текст джерелаAquino, Eddie Villanueva. "PREDICTING BUILDING ENERGY PERFORMANCE: LEVERAGING BIM CONTENT FOR ENERGY EFFICIENT BUILDINGS." DigitalCommons@CalPoly, 2013. https://digitalcommons.calpoly.edu/theses/1077.
Повний текст джерелаKihlberg, Fredric. "Prestandabaserad design genomkonceptuell energianalys : Performance-based design through conceptual energy analysis." Thesis, KTH, Byggteknik och design, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-36497.
Повний текст джерелаAljundi, Kamar. "Is BIM an effective methodology to integrate LCA in the buildings' design?: case study: building of the University of Aveiro." Master's thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/23198.
Повний текст джерелаO setor de construção tem vindo a crescer consideravelmente desde a revolução industrial, contribuindo para o aumento dos impactes ambientais na Terra, tais como o aquecimento global, smog, e mudanças climáticas. Como tal, são necessários edifícios mais sustentáveis para reduzir esses impactes. De facto, como a indústria da construção se inicia com a escolha dos materiais a aplicar, a seleção de materiais com menores impactes ambientais e com uma elevada durabilidade são essenciais para alcançar uma construção mais sustentável, particularmente se integrados logo nas fases iniciais de projeto. Durante o século passado, o conceito de sustentabilidade e as suas estratégias desenvolveram-se significativamente, proporcionando à comunidade cientifica e técnica diversas metodologias e sistemas com o intuito de promover edifícios verdadeiramente sustentáveis, tais como ACV, e sistemas de avaliação da sustentabilidade como o BREEAM e o LEED. Por outro lado, o setor da construção assistiu nos últimos anos a uma revolução tecnológica com a introdução da metodologia Building Information Modelling - BIM. Com efeito, é uma metodologia na qual as especialidades de arquitetura e engenharia estão integradas, podendo ser modeladas e geridas ao mesmo tempo, no mesmo ficheiro e no mesmo ambiente, desde as fases iniciais do projeto. Assim, esta visão mais sistemática e organizada tem a potencialidade de diminuir os erros na fase da construção e da operação. Este trabalho analisou o edifício do Departamento de Comunicação e Arte da Universidade de Aveiro, que foi concebido como um edifício sustentável do ponto de vista energético. A ACV foi utilizada para calcular os impactes ambientais de três diferentes soluções estruturais (mista, metálica e betão armado), numa perspetiva Cradle-to-Cradle, considerando dois períodos de vida útil: 50 anos e 100 anos. Usaram-se ainda duas abordagens de cálculo: (i) a abordagem tradicional de ACV, usando o SimaPro baseado no modelo BIM-3D; e (ii) o BIM-ACV, usando o Tally e o modelo BIM-3D. Esta comparação concluiu que existem vários obstáculos na aplicação da ACV no setor da construção, particularmente no que respeita à (in)existência de bases de dados específicas que influenciam os resultados da ACV. Além disso, essas duas abordagens destacaram as potenciais vantagens que a integração da ACV no BIM poderia ter no setor da construção, em geral, e particularmente para a obtenção da construção sustentável. Concluiu-se, ainda, que a estrutura de betão armado tem menos impactes relativos ao aquecimento global do que as outras que foram também consideradas. Por fim, este trabalho permitiu evidenciar a necessidade e a potencialidade da integração da ACV no BIM no setor de construção. Adicionalmente, conclui-se que é necessário desenvolver uma base de dados nacional de materiais e de técnicas construtivas, de modo a minimizar os erros e a incerteza dos cálculos da ACV, quer usando a abordagem tradicional LCA ou o BIM-ACV.
The buildings’ sector has been growing since the industrial revolution and consequently it has been contributing increasingly to the world negative environmental impacts, such as global warming, smog emissions and climate changes. Thus, more sustainable buildings are needed, since it is essential to reduce the negative impacts of the construction sector. Indeed, since the construction process starts selecting construction materials with less environmental impacts and high durability that are essential to reach more sustainable constructions, particularly when applying it from the early stage of design phase. During the last century, sustainability concept and strategies have been developed significantly, providing the Scientific and Technical community with various methodologies and systems aiming to promote real sustainable buildings, such as LCA, and labelling and assessing systems like BREEAM and LEED. On the other hand, the construction and design sectors have recently been facing a new technology revolution with the Building Information Modelling – BIM, approach. In fact, BIM is a methodology in which the architectural and engineering areas can be modelled, cooperated and managed at the same time, in the same file and environment and since the early stages of the design. Thus, BIM provides less errors in the construction and operation phases in a much more organised and systematic approach. This work analyses the building of Communication and Art Department of the University of Aveiro, which was designed as a sustainable building according the energy efficiency. LCA methodology was used to calculate the environmental impacts of three different structural solutions (mixed, steel and concrete) in a Cradle-to-Cradle perspective, considering two life spans: a 50-year life span and a 100-year one. Throughout this case study, applying LCA in the construction sector was experienced using two approaches: (i) LCA traditional approach using SimaPro and BIM-3D model; and (ii) BIM-based LCA using Tally and BIM- 3D model. This comparison showed that there are various obstacles when applying LCA in the construction sector, particularly the (in)existence of specific database, since they influence LCA results. Moreover, those two approaches highlighted the potential advantages that LCA integration with BIM could add to the construction sector, in general, and particularly to sustainable construction. This study also concludes that the concrete structure has less global warming impacts than the others that were considered. Finally, this work showed the necessity and the potentiality of integrating LCA in BIM in the construction sector. In addition, it concludes the need to develop a national database of construction materials and techniques that could minimise the errors and the uncertainty of LCA calculations whether using LCA traditional approach or BIM-based approach.
Plataforma Global de Apoio a Estudantes Sírios
Rydberg, Henrik. "Hållbara projekteringsverktyg : Från byggnadsinformationsmodell till simulering – en utvärdering av Revit och Virtual Environment." Thesis, Mälardalens högskola, Akademin för hållbar samhälls- och teknikutveckling, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-15408.
Повний текст джерелаFält, Viktor. "Strategies to effectively integrate a 3D model of a building in a software systems for real-time visualization." Thesis, Linköpings universitet, Kommunikations- och transportsystem, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-119954.
Повний текст джерелаSchirén, Whokko, and Trixie Swahn. "Vibrations in residential timber floors : A comparison between the current and the revised Eurocode 5." Thesis, Linnéuniversitetet, Institutionen för byggteknik (BY), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-89293.
Повний текст джерелаSchmied, August, and Moa Strömberg. "Armering i pålfundament : Effektivare byggprojektering med grafisk programmering." Thesis, KTH, Byggteknik och design, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-259674.
Повний текст джерелаMost of the time spent on project planning is dedicated to the development of construction documents, mainly 2D-drawings. A more modern method is to gather all information about a building project in a coordinated 3D-model, so called BIM-model. Building information modelling (BIM) is a well-known design method based on a digital 3D model having enough information to enable procurement work and actual production. The model consists of parameters that represent different properties and when a parameter is changed, the model is updated automatically. These parameters can be accessed and modified through external programs, so called plug-ins that extend the original software’s functionality using program code. Visual programming is a modern programming method which utilizes a visual interface that favours users with little or no experience. Using visual programming, parameter control can be made more efficient and save valuable time. For this reason, Dynamo (a plugin developed by the company Autodesk for Revit), has been studied to create a so-called script that automates 3D modelling processes in Revit linked to placement of reinforcement in pile caps. In addition, possibilities for standardization have been investigated, as well as the advantages and disadvantages of the method. With this project, the potential of Dynamo and the scripts created through an empirical study is described, where a relatively simple case study is carried out in order to illustrate the amount of time saved through visual programming compared to corresponding work manually done in Revit. Furthermore, calculation templates were created, according to the strut and tie model and Eurocode 2, to provide the script in Dynamo with the correct inputs. The result shows that Dynamo and visual programming can make placement of reinforcement in pile caps more efficient. While the degree of efficiency is case dependent, the case study showed an overall 85-90% time saving. A general conclusion suggests that the more complicated rebar designs, the more time there is to be saved. Since visual programming is based on the automation of repetitive processes, there is great potential to standardize structural design with the help of Dynamo scripts. Companies can thus create routines that increase continuity and quality in their projects. The automation also leads to fewer human errors and a more efficient execution. The client is advised to further develop this method by implementing explicit routines regarding 3D modelling with visual programming and investigate the possibilities of automation of reinforcement design in other load-bearing structures.
Bozhinovski, Konstantin. "Generative design of a nature-inspired geometry manipulated by an algorithm in a BIM-environment, applied in a façade system for a residential building in Bologna, Italy." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/21501/.
Повний текст джерелаDahl, Gunnar, and Nils Ahlner. "Effektivisering av byggprojektering med hjälp av grafisk programmering." Thesis, KTH, Byggteknik och design, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231168.
Повний текст джерелаBIM (Building Information Modeling) is today a proven concept in construction design.An important strength with BIM is the possibility of coordination between allactors in the project. The BIM tools are based on parameterization, which meansthat the model's object has a large set of data attached to it. The properties ofthe objects can be changed by adjusting the parameter data. Parameterization alsomeans that data can be easily accessed, extracted and controlled by external applications.It is for this purpose that the implementation of graphic programming playsan important role. With the help of graphical programming, several operations inthe BIM work can be automated. Thus, there is the potential to save valuable timefor the construction projector. Autodesk Revit is one of the tools that dominates the BIM market. In Revit, theuser can design and document a construction project in all its phases. For a fewyears back, there is an addition to the program called Dynamo. Dynamo allows theuser to control Revit using scripts in a user-friendly graphical environment.This essay explains Dynamo's possibilities and limitations applied to work processesin building design. It describes the optimization potential and appropriate applications.Conclusions are mainly drawn based upon the generation and evaluation ofgraphical scripts. The result shows that several vital moments in the construction projector's dailywork ow can be rationalized through the introduction of graphic programming. Rationalizationmeans time savings that contribute to increased economic sustainabilityfor the construction company.
Tortorella, Giulia. "La strategia BIM a supporto del progetto della sicurezza nel cantiere edile: il caso dell'ospedale di primo soccorso a Lampedusa." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2014. http://amslaurea.unibo.it/7546/.
Повний текст джерелаBenzarti, Ghedas Habiba. "Modeling and thermal optimization of residential buildings using BIM and based on RTS method : application to traditional and standard house in Sousse city." Doctoral thesis, Universitat Politècnica de Catalunya, 2017. http://hdl.handle.net/10803/406007.
Повний текст джерелаLa qualité thermique des bâtiments modernes a une tendance à se détériorer en raison de considérations esthétiques et économiques. L'utilisation de matériaux de construction de bon marché et thermiquement inappropriées ne cesse d'augmenter dans les nouvelles constructions. À l'heure actuelle, la conception architecturale a changé. L'orientation est peu étudiée, la hauteur intérieure des nouveaux locaux est faible comparée à celle de la maison traditionnelle et le patio est remplacé par un couloir. Les différentes parties sont devenues communicantes. Ainsi, l'espace de chauffage et de refroidissement devient plus important. L'habitation traditionnelle tunisienne présente une architecture bioclimatique qui permet de fournir un confort minimal naturellement. Notre travail vise à exploiter le REVIT dans la simulation des bâtiments résidentiels en Tunisie et d'optimiser le modèle d'habitat moderne. Après validation des résultats obtenus par REVIT, comparés à ceux de TRNSYS et SPREADSHEET ASHRAE, nous l'avons, tout d'abord, exploité pour évaluer les deux modèles d'habitats (traditionnels et contemporains). Les résultats d'évaluation, en utilisant REVIT, montrent que l'habitat traditionnel sont plus efficaces que celui moderne particulièrement en période estivale. Par la suite, nous avons optimisé le modèle de maisons contemporaines, en utilisant en premier lieu, les stratégies passives de l'architecture bioclimatique traditionnelle, et en second lieu, en utilisant les mesures d'amélioration utilisées dans des études antérieures. Afin, de déterminer une variante de modèle d'habitat contemporain thermiquement optimal et qui s'intègre dans le climat méditerranéen, plusieurs tests sont générés en utilisant REVIT. Ces tests montrent l'efficacité de ce dernier qui se base sur la méthode RTS dans la simulation thermique des bâtiments résidentiels.
Maria, Mônica Mendonça. "Tecnologia BIM na arquitetura." Universidade Presbiteriana Mackenzie, 2009. http://tede.mackenzie.br/jspui/handle/tede/2640.
Повний текст джерелаThis dissertation presents the technology within BIM and its implication in the architectural and engineering design process. Since the 60 s, aerospace and automotive industries have already revolutionized the way of project with the CAD, and manufacture with the assembly lines. In AEC, the CAD became BIM, a new way of project, build and manage, from conception till life cycle building. This brought a project and construction time reduction, cost and environmental impacts decrease foreseen in LEED and merged in BIM.
Este trabalho objetiva apresentar a tecnologia contida no BIM e suas implicações no processo de projeto da arquitetura e engenharia civil. A partir de 1960, as indústrias, aeronáutica e automotiva, já haviam revolucionado a forma de projetar com o CAD, e de fabricar com as linhas de montagem. Na Arquitetura, Engenharia e Construção, o CAD está evoluindo para o BIM (Building Information Modeling), uma forma de projetar, construir e gerenciar, da concepção ao habite-se, aplicável a todo o ciclo de vida da edificação. Dessa forma houve não só uma redução no tempo de projeto e construção, mas também em custos e impactos ambientais previstos em normas internacionais incorporadas ao BIM.
Antunes, Flávio da Cunha. "Prevenção de riscos na fase de projeto com recurso à metodologia BIM." Master's thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/18044.
Повний текст джерелаA utilização da metodologia BIM tem vindo a aumentar no setor da AEC, implicando um novo paradigma de trabalho, com o uso de modelos tridimensionais paramétricos. No entanto, as vantagens desta metodologia não têm sido utilizadas pelos projetistas para a prevenção de riscos profissionais e para o planeamento das respetivas medidas de segurança, tendo em consideração que na fase de projeto se tem o maior potencial para aplicar eliminar/minimizar os perigos e, consequentemente influenciar a segurança em obra e nas fases posteriores à sua conclusão. Apoiado na revisão bibliográfica, esta dissertação tem como objetivo mostrar a capacidade de se desenvolverem ferramentas que permitem adicionar funcionalidades ao software Autodesk Revit 2016, para deteção automática de situações de perigo, no modelo 3D. Para se atingir este objetivo, teve-se por base o modelo 3D da estrutura dum edifício de radioterapia, utilizado para se proceder à validação das ferramentas desenvolvidas. Foi feita uma revisão das normas e legislação existentes, identificando as possíveis de ser aplicadas em linguagem computacional. Com base em dois sistemas de rule-check, destinados à prevenção de quedas em altura, é proposto um framework para a sua implementação na metodologia BIM. A partir deste, foi desenvolvido um plugin que permite a deteção de perigos de queda, a avaliação da segurança de uma forma qualitativa através da aplicação do Job Hazard Analysis e de listas de verificação, e a importação de objetos relativos aos sistemas de proteção contra quedas em altura. Em suma, conclui-se que as API’s do software Autodesk Revit possibilitam a criação e adição de diversas funcionalidades possíveis de serem utilizadas na metodologia BIM, e mais especificamente na prevenção de riscos na construção, contribuindo esta dissertação para a aplicação de uma nova abordagem para a prevenção de riscos em projeto.
The use of BIM methodology is to increase in the AEC sector, implying a new work paradigm with the use of three-dimensional parametric models. However, the advantages of this methodology have not been used by the designers for the prevention of occupational risks and for the planning of the respective safety measures, since the design phase is considered the optimal period to eliminate/minimize the hazards and influence the safety at work and in all of the phases after its conclusion. Supported by literature review, this dissertation aims to show the ability to develop tools that allow to add functionalities to Autodesk Revit 2016 software for automatic detection of danger situations in the 3D model. In order to reach this goal, it was used the 3D model of the structural phase of a radiotherapy building to validate the developed tools. A review of existing norms and legislation was made, identifying possible ones to be applied in computational language. Based on two rule-check systems, aimed at preventing height falls, is proposed a framework to be implemented in the BIM methology. From this, a plugin was developed to allow the detection of fall hazards, the qualitative evaluation of safety through the application of Job Hazard Analysis and safety checklists, and the importation of BIM objects related to fall protection systems. In scene, it is concluded that Autodesk Revit software APIs let the creation and addition of several functionalities that can be used in the BIM methodology, more specifically in the scope of safety at construction, contributing this dissertation to the application of a new approach in the risk prevention through design.
Thorvaldson, Niclas, and Daniel Persson. "Utformning av konst- och musikhus med läge i unik miljö." Thesis, Linnéuniversitetet, Institutionen för teknik, TEK, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-12526.
Повний текст джерелаThe purpose of this thesis was to produce two alternative architectural designs, of a building, that will house various exhibitions and activities. Mainly those will be culture related; music and arts. The building is to be located in a Swedish lake, called Växjösjön, and the structure is intended to be placed on a floating hull.Initially the authors investigated, and discussed, what possibilities and limitations that were associated with the building. The authors then, separate from one another, created one alternative design each.The first of the two designs found its inspiration in different geometrical shapes, whereas the other was more of an organic design with a smooth and flowing architecture.
De digitala ritningarna finns att tillgå från författarna på begäran.
Yin, Lu I., and 盧怡吟. "The Development of Building Construction Design Review Process - from Contractor's Perspective." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/82525815631464327560.
Повний текст джерела國立高雄應用科技大學
土木工程與防災科技研究所
98
Design errors and inconsistencies in the design documents are commonly seen in the building construction projects in Taiwan. These are the results of the poor planning and complex regulations, standards and contract conditions. The design errors and inconsistent design documents will have negative impact on project quality, cost and schedule. Having no standard design review process in place, the contractors have to rely heavily on individual engineers to review the design documents. As a result, it is very difficult to maintain the quality of the design review. In view of this, the aim of this research is to study the current practice of design review process, generate a scheme of critical design review items and propose a standard design review process from the building contractors’ perspective. An intensive literature is first conducted to come up with a list of fundamental design review items and this list is reviewed by industry experts to form the basis of the survey questionnaire. The questionnaire is then sent to industry experts and the AHP method is implemented to determine the relative weights of the design review items. These weights represent the comparative importance of different design review items. Based on this, a design review process with review contents, timing and critical items is proposed for the building contractors. The contractors are able make use of these results to improve their own design review process and become more competitive in the industry.
Wu, Pai-Ling, and 吳佰玲. "The Study of Schedule Risk for Urban Design Review in Design-Build Building Construction." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/36249068554959307277.
Повний текст джерела國立臺灣大學
土木工程學研究所
95
In recent years, the case’s quantity and scale of the design-build construction had tendency of the large growth. However, to carryout design-build construction in practical professional management for those items in schedule management, the most concerned reason is the variation of the building administration superintend by the proprietor in the schematic design stage. Even causes the unsatisfied reason that had been requested to finish in a set time and tremendous influence the benefit of design-build construction. That may reduce the time-limited for a project. The self-criticism reason is the investigation time of the government authority (the third party in the contract) that have been neglected and ignored frequently by the proprietor. Because the urban design review is the important item in the administration procedure for the building construction. Although the time influence is the biggest, but the proprietor always requests contractor to finish by a set time, and compress the urban design review schedule in the bidding document. That creates a lot of difference between the actual urban design review schedules. This research scope contains 5 public construction categories; include “the underground parking garage", "the office", "the sport center", "the exhibition hall" and "the housing”. These cases have been approved from the year of 2002 to 2007, January. These research objects are limited in purchase amount over $NT two hundred million, the contract pattern belonging to design-build construction type (the PCM+ site supervision), or the reason of the execution backwardness factor being as the urban design review schedule fallen behind. This research studied by the literature review from, the investigation and the analysis of 15 design-build construction cases in urban design review, the induction influence reason of the design-build construction in urban design review schedule, the synthesis backwardness factor and the countermeasure of the reasonable time in urban design review schedule. That will propose the strategy through the analysis of specialists’ interview, the estimation schedule duration and frequency in urban design review. In order to, get a reasonable urban design review schedule. It will establish the urban design review reasonable schedule of the design-build construction project from the number of times through this research case analysis result. It will provide the proprietor a grading item from the urban design review reasonable schedule, and set a proper contract time-limited section. It will request the contractor to propose a detail analysis about the urban design review reasonable schedule in the tender document. In order to, make the proper action and extra schedule in advance by the special case prejudgment, and also being as the grading item and the control basis.
Yee, Eng Fu, and 余英孚. "A systematic review of pedagogical design and implementation based on knowledge building principles." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/zt927a.
Повний текст джерела國立政治大學
教育學系
105
The main purpose of this study is to conduct a systematic review of research that contains pedagogical design and implementation based on knowledge building principles (KBPs). This study includes 56 knowledge building (KB) studies selected from the Scopus database between 2001 and 2016. Multi-levels of coding procedures were employed in categorizing different analysis dimensions in order to answer the research questions. Particularly, the coding scheme regarding the dimension of the learning outcomes employed a procedure to compute the inter-coder reliability using Cohen’s kappa coefficient (k) formula with the coefficient k = 0.8.Findings mainly based on descriptive analysis revealed that KB studies are more frequently conducted in Eastern countries than Western countries. Most of the KB studies that involved students from K-12 levels were conducted in the natural science domain. In particular, it was found that KB studies conducted in the Eastern countries are shifting their study focus from learner communities to teacher communities. Case study was found to be the preferred research design in most KB studies over the past 16 years, and regarding analysis, mixed methods analysis is the more popular analysis method.Moreover, more than one-half of the KB studies used Knowledge Forum (KF) as the main online learning platform.Of all KBPs, idea-related KBPs are most likely to be employed in the KB studies. Regarding learning outcomes, about one-half of studies fall in the social studies domain. Among these social learning outcomes, basic interaction on KF activities (build notes and post notes) was found more than higher-order interaction on KF activities (synthesize notes).
Beauregard, Sandy J. "Greening the Building Code: an Analysis of Large Project Review Under Boston Zoning Code Articles 37 and 80." 2013. https://scholarworks.umass.edu/theses/1021.
Повний текст джерелаChen, Chih-Chung, and 陳志忠. "Review on the Introducing Physical Environment into Designs Decisions in Building Practices." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/dceh8h.
Повний текст джерела樹德科技大學
建築與室內設計研究所
106
Although the architectural physical environment has become more and more important, residential buildings and connected buildings are mostly designed for front and rear windows. In the early stage of designing and designing, most discussions were about which products to plan, the cost and the selling price, and the location of the stairs and toilets. The physical environment of the building is often overlooked. The construction of modern day-to-day residential buildings is generally a narrow and long base. The most important consideration is the configuration planning of the layout. With standard front and rear window designs, the direct influence on the indoor light source will be the planning space for the stair space. The early planning also did not consider the flow of light and air, and only slightly changed according to the difference in land type. This study hopes that the construction of the case can be used as an example to simulate the physical environment and conduct a review of the proposal. In the early stages of planning for the construction of the project, the evaluation of each factor will be considered, and it will be immediately included in the application for construction. This study mainly refers to the construction license data of the new connected residential building in Pingtung City. According to the physical environment of the building, the computer is used to build the model and then the software is used for simulation. The results of the simulation are supplemented by numerical analysis and comparative analysis. During the period, the following three points can be reached through research to provide reference for the construction and construction planning. 1. Simulate the roof of the stairwell roof and the position of the opening, the interaction of the light environment. 2. Simulate the relationship between sunlight and shade between new buildings and buildings in close proximity to each other. The impact on the target buildings can be used as a reference for designing natural lighting, openings, green roofs, and solar panels. 3. Simulate the flow of wind (CFD), whether to increase the valve window or install the ventilation door? Stair space across all floors, how to guide the hot air from the top layer? The position of the opening is adjusted? And the actual design of the design differences.
Kwen-Shiung, Guo, and 郭坤雄. "Impacts of Revised Seismic Design Code of Buildings in Taiwan." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/21064768952846250359.
Повний текст джерелаChen, Won-Yu, and 陳婉鈺. "The Incentive and Reciprocation in Urban Design Review System–Four High-rise Office Buildings in Xinyi Planning District." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/5xf2k4.
Повний текст джерела國立臺灣科技大學
建築系
95
Since the first plans for the Xinyi Planning District were created in 1980, the urban area has gradually taken shape under the influence of Taipei City planning. During the planning process, there were two specific important plans commissioned by the government: the first overall review of urban planning addressed to solve the problems of slow in the land-development process, and the second, the need for changes in planning objectives. After the second review, the government decided to initiate a new incentive plan, not only to attract more participation from private developers but also to encourage designers to create open spaces. This study explores the Xinyi Planning Area development by focusing on four high-rise office buildings. They are classified into two categories: corporate headquarters, the Chinatrust Group Tower and the Chinese Petroleum Building; and commercial office buildings, Taipei 101 and the President Enterprise Corporation Tower. The background behind the Xinyi incentive plan is discussed; namely, how it encouraged greater use of open space, and interpretations of these purposes of providing public spaces, especially with regard to these cases how to face the reciprocation plan and the performance of public spaces. Further, the paper analyses the incentive plan as a part of the Urban Design Review System and examines issues affecting the development process and implementation of changes at this stage. The research reveals that corporate headquarters didn’t follow the guidelines through provision of open space, and commercial office buildings followed the incentive plan and received more rewards for their public space but the results had little improvement in the quality and function of the new public space. From the viewpoint of social justice, there is a problem of fairness in offering additional incentives to the developer for the inclusion of public space during the development phase. Therefore, it is recommended that future programs by the city will address how to resolve issues of fairness and enforcement when providing urban design reviews that include added incentives.
"Vertical community: new typology for high-rise housing to revive the community." 2011. http://library.cuhk.edu.hk/record=b5894568.
Повний текст джерела"Architecture Department, Chinese University of Hong Kong, Master of Architecture Programme 2010-2011, design report."
Includes bibliographical references (p. 60).
Chapter 1. --- DESIGN PRINCIPLES
Chapter 1.1 --- Theory --- p.4
Chapter 1.2 --- Design Principles
Chapter 1.2.1 --- Floor Level. --- p.6
Chapter 1.2.2 --- Building Level --- p.7
Chapter 1.2.3 --- Master Planning Level --- p.9
Chapter 2. --- SPECIAL STUDY
Chapter 2.1 --- C a s e Study on Ground Treatment
Chapter 2.1.1 --- Public Housing --- p.14
Chapter 2.1.2 --- Private Housing --- p.15
Chapter 2.1.3 --- Oversea Public Housing --- p.16
Chapter 2.1.4 --- Oversea Private Housing . --- p.17
Chapter 2.2 --- Strategy on Ground Design --- p.18
Chapter 3. --- SITE
Chapter 3.1 --- Site Plan --- p.22
Chapter 3.2 --- Site Potential --- p.24
Chapter 4. --- DESIGN CONCEPTS
Chapter 4.1 --- Floor Level
Chapter 4.1.1 --- Courtyard Based Corridor --- p.28
Chapter 4.1.2 --- Unit Design' --- p.29
Chapter 4.2 --- Building Level
Chapter 4.2.1 --- Thematic Cluster --- p.30
Chapter 4.2.2 --- Lower Level Cluster --- p.31
Chapter 4.2.3 --- Mid-level Cluster --- p.32
Chapter 4.2.4 --- Rooftop Cluster --- p.33
Chapter 4.3 --- Master Planning Level
Chapter 4.3.1 --- Continuous Landscape --- p.34
Chapter 4.3.2 --- Environmental Simulation --- p.35
Chapter 4.3.3 --- MLP --- p.37
Chapter 5. --- PRESENTATION
Chapter 5.1 --- Section --- p.42
Chapter 5.2 --- Perspective --- p.44
Chapter 5.3 --- Model
Chapter 5.3.1 --- Massing Model --- p.48
Chapter 5.3.2 --- 1:1000 --- p.50
Chapter 5.3.3 --- 1:500 --- p.52
Chapter 5.3.4 --- 1:100 --- p.55
Chapter 6. --- BIBLIOGRAPHY
Chapter 6.1 --- Books --- p.60
Chapter 6.2 --- Websites --- p.60