Дисертації з теми "Building at design stage"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Building at design stage".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Teo, Patrick. "Fire Engineering Design Problems at Building Consent Stage." Thesis, University of Canterbury. Civil Engineering, 2000. http://hdl.handle.net/10092/8354.
Повний текст джерелаJalaei, Farzad. "Integrate Building Information Modeling (BIM) and Sustainable Design at the Conceptual Stage of Building Projects." Thesis, Université d'Ottawa / University of Ottawa, 2015. http://hdl.handle.net/10393/32536.
Повний текст джерелаUrban, Bryan J. (Bryan James). "The MIT Design Advisor : simple and rapid energy simulation of early-stage building designs." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/42032.
Повний текст джерелаThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Includes bibliographical references (p. 173-177).
Simulation tools, when applied early in the design process, can considerably reduce the energy demand of newly constructed buildings. For a simulation tool to assist with design, it must be easy to use, provide feedback quickly, and allow rapid comparisons. Most existing tools do not meet these needs, usually because they were intended for modeling finalized building designs. Often there is no user interface, and it can take hours or days to prepare, run, and interpret results. Such tools are too sophisticated for design purposes. In this document the MIT Design Advisor is presented as a simple and rapid building energy simulation tool, developed specifically for architects and building designers. Conceptual building designs can be modeled quickly and without formal training. Results are interpreted graphically and displayed to the user in a simple user interface. Side-by-side comparisons of building designs can be made, allowing users to quickly learn which building components have the biggest impact on energy consumption (heating, cooling, and lighting), indoor daylight levels, and thermal comfort. User-specified building parameters are used together with local weather data to predict monthly and annual energy use. The heat transfer model used to make the energy predictions is explained in detail in this thesis. Calculation methods are given and validated. Agreement with existing models is quite good. The MIT Design Advisor is available at http://designadvisor.mit.edu.
by Bryan J. Urban.
S.M.
Li, Beidi. "Use of Building Energy Simulation Software in Early-Stage of Design Process." Thesis, KTH, Byggvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-217902.
Повний текст джерелаLi, Jinmin. "Integrating Building Information Modelling (BIM), Cost Estimating and Scheduling for Buildings Construction at the Conceptual Design Stage." Thesis, Université d'Ottawa / University of Ottawa, 2016. http://hdl.handle.net/10393/35292.
Повний текст джерелаVoellmy, Andreas. "Multi agent room simulation for early stage building layout design Diploma thesis /." Zürich : ETH, Eidgenössische Technische Hochschule Zürich, [Department of Computer Science], 2003. http://e-collection.ethbib.ethz.ch/show?type=dipl&nr=133.
Повний текст джерелаPoon, Joanna L. K. "Development of a process model for the design stage of building projects." Thesis, University of Wolverhampton, 2001. http://hdl.handle.net/2436/111548.
Повний текст джерелаBermond, Raphaelle. "Role of diffusers in the acoustic design of the stage enclosure in concert halls." Thesis, University of Salford, 2002. http://usir.salford.ac.uk/26581/.
Повний текст джерелаAlper, Natalie B. "Early stage product design process : a case study of an educational building kit." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/113504.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (page 35).
A Science, Technology, Engineering, and Math (STEM) kit for the assembly of a lamp was created to encourage children's interest in mechanical and electrical engineering. To ensure the lamp was intuitive and fun to use, user testing was conducted. As the user interface (UI) for the lamp was designed and developed, tests were conducted with users using a variety of prototypes ranging from paper, cardboard, and plastic to PowerPoint storyboards on the computer. By incorporating user testing throughout the process of identifying possible button layouts as well as proper lamp proportions, a final intuitive UI with a single panel of buttons was converged upon. This UI utilized one button to switch through the four possible light modes instead of having a separate button for each mode. This UI will be employed in a future prototype that will be further tested with children in the intended age range. These tests will utilize 3D printed pieces for the base and buttons, and will incorporate all the PCBs and LEDs that are intended for use in the final product.
by Natalie B. Alper.
S.B.
Wong, Kwok-chu, and 王國柱. "A study of property manager's participation at the building design stage in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B31968156.
Повний текст джерелаWong, Kwok-chu. "A study of property manager's participation at the building design stage in Hong Kong." Hong Kong : University of Hong Kong, 1996. http://sunzi.lib.hku.hk/hkuto/record.jsp?B18812223.
Повний текст джерелаRavan, Nazila. "A Study on Life Cycle Assessment-based Tool for the Early Stage of Building Design." Thesis, KTH, Hållbar utveckling, miljövetenskap och teknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-241434.
Повний текст джерелаNourbakhsh, Mehdi. "Generalizable surrogate models for the improved early-stage exploration of structural design alternatives in building construction." Diss., Georgia Institute of Technology, 2016. http://hdl.handle.net/1853/54942.
Повний текст джерелаAmjadi, Cindy, and Justyna Melek. "The impact of stage casting on shrinkage restraint in concrete walls." Thesis, KTH, Byggteknik och design, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-279467.
Повний текст джерелаDet mest använda materialet i anläggnings- och industribranschen är betong. Betong är ett material som har använts länge och kommer fortsätta att användas. Därför är det främst viktigt att ha kunskap om materialets egenskaper och hur det påverkas av olika förhållanden. Ett stort problem med betong är sprickbildning när dess krympning förhindras. När en betongvägg gjuts mot ett underlag förekommer krymptvång. Sprickorna som uppstår på grund av detta kan orsaka läckage och armeringskorrosion som minskar betongens livslängd och är dessutom estetiskt fula. Ett sätt att minska tvånget är att dela in gjutningen i etapper. I detta arbete undersöks om en genomtänkt gjutetappsindelning är en metod som teoretiskt och praktiskt kan påverka krymptvånget och därmed sprickbildningen i betongväggar. Denna rapport betraktar dragspänningarna i en 15 meter lång betongvägg med hållfasthetsklassen C30/37. Väggen utsätts för två olika relativa luftfuktighetsförhållanden, inomhusmiljö samt utomhusmiljö vilket ger ett värde på 50% och 80%. Analyserna omfattar fyra olika gjutningsmetoder för väggen; gjutning utan etappindelning samt gjutning utförd enligt tre genomtänkta etappindelningar. Tiden som betraktas mellan gjutetappsindelningarna begränsas till normal produktionstid, 30 dagar, och en förlängd produktionstid, 60 dagar. Först utförs handberäkningar enligt Eurokod 2 på betongens krympning och krypning för att sedan sätta in resultaten i finita element programmet FEM-Design från Strusoft. Resultaten i rapporten redovisar de maximala dragspänningarna som uppstår i en 15 meter lång vägg utan etappindelning och då gjutning genomförs av genomtänkt etappindelning. Även en variation av friktionsjordens djup analyseras för en utav etappindelningarna. Slutsatsen av resultaten är att gjutetappindelning är en lösning till reduktion av tvång och därmed minskad spänning i betongväggar, då de maximala dragspänningarna reducerades med som högst ca 80%. Effektiviteten av gjutetappindelning är möjlig inom en normal utförandetid.
Mathews, Jim David. "Optimisation and decision support during the conceptual stage of building design : new techniques based on the genetic algorithm." Thesis, University of Plymouth, 2000. http://hdl.handle.net/10026.1/726.
Повний текст джерелаWallace, W. A. "The influence of design team communication content upon the architectural decision making process in the pre contract design stages." Thesis, Heriot-Watt University, 1987. http://hdl.handle.net/10399/975.
Повний текст джерелаCastleton, Holly. "Assessment of design stage energy prediction models for low carbon office buildings." Thesis, University of Sheffield, 2014. http://etheses.whiterose.ac.uk/6676/.
Повний текст джерелаTrauth, Braden W. "Symbiotic Design: Building Resilience & Liberating Economies Through Product Design; Beyond the Circular Economy." University of Cincinnati / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1491558533324546.
Повний текст джерелаZervent, Altan. "Evaluation Of Steel Building Design Methodologies: Ts648,eurocode 3 And Lrfd." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/3/12610541/index.pdf.
Повний текст джерелаis almost the same for procedures of LRFD and EC3. It is important to note that those procedures consider 20 % of material saving compared to TS648.
Mandelbaum, Andrew (Andrew Joseph). "Improvements to building energy usage modeling during early design stages and retrofits." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/92195.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 104-108).
A variety of improvements to the MIT Design Advisor, a whole-building energy usage modeling tool intended for use during early design stages, are investigated. These include changes to the thermal mass temperature distribution and lighting requirement calculations, the formulation of a representative day scheme to reduce the number of days that need to be simulated to find energy usage for a full year, the creation of an optimization algorithm to allow users to improve on their designs, and the addition of an algorithm to predict potential savings from retrocommissioning (RCx) using a limited set of simple inputs. Design Advisor itself is also tested for usability, speed, and accuracy using three existing buildings. The frequency of thermal mass-related calculations is reduced by finding the limits of the semi-implicit Crank-Nicolson method before it begins to return physically implausible oscillatory temperature profiles. An effort is made to speed up lighting calculations using a multivariate regression analysis in place of a multiple-reflection-based illuminance model. Representative days are formed by creating an average and two extreme weather days per month using existing climatological data, reducing the number of simulated days per year from 365 to 72 (three per month, repeated once for training). Combined, these changes lead to reductions in run time of up to 50% with roughly 10% loss of accuracy. The optimizer leverages these run time improvements to rapidly find optimal building designs given a set of input constraints. Initially, a multistep multivariate regression is used to reduce the given search space and tighten the constraints. Then, a genetic algorithm is used to find the target solution. Initial tests of this combination have led to average reductions in energy usage of 25% given 6 minutes of calculation. To extend Design Advisor's applicability to existing buildings, an algorithm for predicting potential energy savings from RCx is implemented and tested. A database of 90 buildings that have undergone an RCx process and had their resulting energy savings documented has been collected. A k-nearest neighbors algorithm is used to evaluate the potential savings of test buildings based on this data set, operating on the assumption that similar buildings (in terms of location, size, and energy usage intensity) will present similar faults or opportunities for savings. While the average savings percentage prediction error is 0.02, the root-mean-square error is 12.4, which is greater than the actual savings potential of many buildings. Model validation is performed using three existing buildings; two in the Philadelphia area and one on MIT's campus. For energy types for which no building faults or other issues were later found (as in the MIT building), final usage predictions are found to be accurate to within a mean bias error of 11.2% to 2.6%. To improve upon these accuracies, further details about key building parameters and modes of operation would be required. These studies also inform further usability improvements, including reporting site (rather than primary) energy usage and expending reported electricity usage to include loads other than lighting.
by Andrew Mandelbaum.
S.M.
Agarwal, Rohit. "User Interface Design of Head-Up Display Using Scenarios : An Early Stage Innovation Project at Bombardier." Thesis, KTH, Maskinkonstruktion (Inst.), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-244452.
Повний текст джерелаHead-up display (HUD) has a proven track record in the aviation and automobile sectors, allowing pilots and drivers to access information without diverting attention from the outside world. Similar benefits may be realized by the installation of HUD in locomotive cabs. The objective of this thesis work is to develop the user interface for HUD based on the ERTMS system. The HUD will be an added safety feature to the trains to prevent drivers from refocusing between the instrument panel and the outside view thus leading to reduced driver fatigue and better observation of the tracks ahead. Scenario Based Design method has been used to implement the project work with discussions regarding its advantages and limitations. The use of scenarios has allowed the design team to understand the scenarios that the drivers face in depth and has aided during the workshops to understand the drivers’ routine better. Additionally, recommendations for the hardware, installation and future work have been provided to support further implementation of the project.
Chadbourn, Kayte A. "A historical comparative analysis of the Norway and Maine State Buildings from the 1893 Columbian Exposition." Muncie, Ind. : Ball State University, 2009. http://cardinalscholar.bsu.edu/642.
Повний текст джерелаRavi, Mathi. "Knowledge-based system approach to integrated design of multistorey office buildings at the preliminary stage." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0001/NQ40307.pdf.
Повний текст джерелаVan, der Klashorst Etienne. "The reliability based design of composite beams for the fire limit state." Thesis, Link to the online version, 2007. http://hdl.handle.net/10019/429.
Повний текст джерелаLovati, Marco. "Methodologies and tools for BiPV implementation in the early stages of architectural design." Doctoral thesis, Università degli studi di Trento, 2020. http://hdl.handle.net/11572/263544.
Повний текст джерелаHaugsbakk, Frida. "Evaluations of how carbon dioxide calculations can be integrated into 3D models at an early design stage for more efficient Life Cycle Assessments on buildings." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-230168.
Повний текст джерелаLivscykelanalyser på byggnader och olika typer av miljöbyggnads-certifieringar blir allt vanligare för nya byggprojekt i Sverige. Materialet i en byggnad spelar en stor roll av hela byggnadens miljöpåverkan. Tidigare forskning indikerar att livscykelanalyser inte är en rutin i dagens byggprocesser vilket kan bero på att osäkerheter i de olika metoderna bakom koldioxidberäkningar. Den här artikeln fokuserar på hur koldioxidekvivalenter av byggnadsmaterial kan bli integrerade med Byggnadsinformationsmodellering. Genom möten med experter i området har datainsamling gjorts för det ändamålet. För att undersöka integreringen byggdes en 3D-modell upp och som senare användes för beräkningar av koldioxidutsläpp i ett kostnads-kalkyleringsverktyg samt undersöka hur en införing av koldioxidekvivalenter direkt i 3D-modellen kunde göras. Resultaten visade hur kostnads-beräkningsverktyget fungerar för beräkningar av koldioxidekvivalenter, tidigt i byggprocessen. Svårigheter i att hitta motsvarande material i kalkyleringsverktygets databas upptäcktes under utvärderingen samt en sammanfattande rapport för beräkningarna. Integrationen direkt i 3D-modellen med visuell programmering visade att en inmatning av koldioxidutsläpp för varje material fungerade vilket möjliggör uppdateringar under hela byggprocessen. Det var också möjligt att importera materialinformation till ett koldioxidberäkningsverktyg. Det öppnar upp möjligheter att ändra och uppdatera koldioxidutsläpp för material tidigt i byggprocessen med hjälp av Byggnadsinformationsmodellering och visar behov av organisationsförändringar på grund av dagens traditionella byggprocess.
Janak, Haidee N. "Three State-run Green Building Programs: A Comparative Case Study Analysis and Assessment." Amherst, Mass. : University of Massachusetts Amherst, 2009. http://scholarworks.umass.edu/theses/337/.
Повний текст джерелаCheung, Kai Tak (Franco). "Development and Testing of a Method for Forecasting Prices of Multi-Storey Buildings during the Early Design Stage: the Storey Enclosure Method Revisited." Queensland University of Technology, 2005. http://eprints.qut.edu.au/16046/.
Повний текст джерелаWenzl, Alexandra K. "The implementation and impact of the National Park Service's design guidelines on Civilian Conservation Corp [i.e. Corps] stonework in Indiana's state parks." Virtual Press, 2003. http://liblink.bsu.edu/uhtbin/catkey/1265461.
Повний текст джерелаDepartment of Architecture
Fennessy, Kristian (Kristian M. ). "Addressing the problem with natural ventilation : producing a guide for designers to integrate natural ventilation into the early stages of building design." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/92642.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 66-69).
Currently, the United States alone is responsible for approximately twenty percent of the world's total energy consumption. This consumption is equivalent to roughly 100 quadrillion Btu of energy, or in plainer terms, over $1 trillion in energy expenditures annually. This sector alone comprises nearly half of all the energy consumed in the United States. Additionally, about seventy-five percent of all electricity produced in the U.S. is consumed by building operations. This precedent has convinced me that finding an alternative is worth the investment. The purpose of my thesis project is to explore substitutes to mechanical heating, ventilation, and air conditioning (HVAC) building systems. My project revisits the concept of natural ventilation and explores and evaluates its feasibility as an energy-saving and comfortable alternative to mechanical ventilation systems. Additionally, my project focuses on how buildings can be designed to naturally condition the indoor environments of our buildings. More specifically, I would like to help architects discover how they can utilize natural ventilation effectively. Using the TRNSYS simulation environment, I methodically show how a designer would use TRNSYS to make informed decisions about natural ventilation in their designs. My research is meant to be a valuable tool for other designers who are unsure or uncomfortable with utilizing this natural process to condition their buildings. The final deliverable of my thesis project is a comprehensive strategy for designers to incorporate natural ventilation in the early stages of their building design.
by Kristian Fennessy.
S.B.
Луцик, Тарас Миколайович. "Підвищення точності визначення класу енергетичної ефективності будівель на стадії проектування". Master's thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/46781.
Повний текст джерелаRelevance of the topic. In this paper we define the energy efficiency class for a building at the design stage and define methods to facilitate the creation of a building energy efficiency certificate at the design stage, to clearly understand the comparison of building energy saving techniques at the design stage and constructed building and to choose the best energy saving method. Energy efficiency of buildings is determined in accordance with the methodology developed taking into account the requirements of European Union legislation, the Energy Community, harmonized European standards in the field of energy efficiency of buildings and approved by the central executive body for state policy in construction. When calculating the energy efficiency of buildings can be used software to determine the energy efficiency of buildings, all elements of which meet the requirements of the methodology for determining the energy efficiency of buildings and are used in the manner prescribed by the central executive body. In the process of determining the energy efficiency of buildings, information on: 1) local climatic conditions; 2) functional purpose, architectural-planning and constructive decision of the building; 3) geometric (taking into account the location and orientation of enclosing structures), thermal and energy characteristics of the building, as well as the energy balance of the building; 4) normative sanitary-hygienic and microclimatic conditions of the building premises; 5) standard service life of fencing structures and elements (including equipment) of engineering systems; 6) technical characteristics of engineering systems; 7) use of renewable energy sources, passive solar systems and solar protection systems, as well as energy produced by cogeneration. Peculiarities of determining the energy efficiency of a building, the premises of which have different functional purposes, are established by the method described in the Law of Ukraine on Energy Efficiency. Research topic. Improving the accuracy of determining the energy efficiency class of buildings at the design stage. The purpose of the study: to increase the reliability of energy performance certificates of buildings at the design stage. Objectives of the study: 1. Analysis of regulatory requirements for the energy certificate of buildings and structures. 2. Analysis of regulatory requirements for energy efficiency classes and features of energy certificates in Ukraine 3. Analysis of the methodology for determining the energy efficiency class of buildings and structures. 4. Comparative analysis of methods for calculating energy efficiency classes of the constructed building and the building at the design stage. 5. Determining the features of calculating the energy efficiency class of the building at the design stage The object of research is the process of certification of buildings on the level of energy efficiency. Subject of research: methods for determining the level of energy efficiency of buildings and structures. Research methods. Developments and researches were carried out on the basis of definition of a class of energy efficiency of the constructed building and the building at a stage of designing and drawing up of the certificate. The practical significance of the results obtained. The research conducted in this work can be used: - to facilitate the creation of a certificate of energy efficiency of the building at the design stage; - for a clear understanding of the comparison of the method of energy saving of the building at the design stage and the constructed building; - to choose the most optimal method of energy saving the building.
Purohit, Siddharth. "Compact modeling of silicon carbide (SiC) vertical junction field effect transistor (VJFET) in PSpice using Angelov model and PSpice simulation of analog circuit building blocks using SiC VJFET model." Master's thesis, Mississippi State : Mississippi State University, 2006. http://sun.library.msstate.edu/ETD-db/ETD-browse/browse.
Повний текст джерелаTagg, Morgan Christian. "The State of BIM-Based Quantity Take-Off Implementation Among Commercial General Contractors." BYU ScholarsArchive, 2017. https://scholarsarchive.byu.edu/etd/6607.
Повний текст джерелаDaudzai, Haqmal Verfasser], Frank [Gutachter] [Ettrich, and Christian [Gutachter] Wagner. "Post-Taliban State-Building in Afghanistan : The State Governmental Design at the National Level and the Role of Democratic Provincial Councils in Decentrali-zation at the Sub-National Level / Haqmal Daudzai ; Gutachter: Frank Ettrich, Christian Wagner." Erfurt : Universität Erfurt, 2020. http://d-nb.info/1216111804/34.
Повний текст джерелаFialko, Jessica Anne. "Graduate stage design." Thesis, University of Iowa, 2013. https://ir.uiowa.edu/etd/2492.
Повний текст джерелаJacobs, Rebecca Mary. "On stage." Thesis, Virginia Polytechnic Institute and State University, 1988. http://hdl.handle.net/10919/53169.
Повний текст джерелаRuiz, Emily Beth. "Costume design for the stage." Thesis, University of Iowa, 2014. https://ir.uiowa.edu/etd/4740.
Повний текст джерелаGiordano, Giulio. "A pockte stage (lights)." Master's thesis, Universidade de Lisboa, Faculdade de Arquitetura, 2021. http://hdl.handle.net/10400.5/22764.
Повний текст джерелаA presente dissertação começou há alguns meses atrás através de uma intuição. Num laboratório de prototipagem em Nápoles, o autor concebeu uma lâmpada cortada a laser, cujo conceito era mostrar formas através da luz em vez de simplesmente iluminar. A intuição de que o movimento fosse de acordo com o som veio naturalmente, utilizando a luz como meio de comunicação e a música como a mensagem a ser traduzida visualmente. O produto resultante levou as seguintes perguntas: porquê a combinação de luz e som era aparentemente ‘cativante’ e porquê a escolha de trabalhar num produto tangível em vez de digital. A fase de investigação começou, dando forma ao estado da arte da dissertação. Uma série de fontes indispensáveis sobre as implicações biológicas e psicológicas do som e da luz começou a surgir, entre as quais se destacam três conceitos fundamentais: Psicoacústica, Sinestesia e Objectos Manuseáveis. Observando a paisagem musical, a forma como os artistas se apresentam presencialmente, em plataformas musicais e redes sociais, leva à seguinte reflexão: a nossa experiência sublinha a necessidade de completar a experiência auditiva envolvendo outro sentido: a vista. Reconhecendo a importância dos objectos Sinestésicos, foi realizada uma cronologia cujo resultado é uma colecção de figuras envolvidas na Música a Cores, em ser uma disciplina que progredia de mãos dadas com a música. Tendo identificado a Sinestesia audiovisual como base e lidando com o desenho da luz, o público alvo foi identificado em cantores e músicos. Através das entrevistas realizadas, os artistas expressaram a dificuldade em ter algo disponível para as performnce que acompanhasse a música. Surgiram assim elementos para redesenhar o primeiro protótipo e para confirmar a usabilidade do produto em locais pequenos. O resultado deste redesenho são três objectos diferentes, pela necessidade expressa de comunicar as várias frequências e o nível da música. As cores foram também introduzidas como elemento recorrente durante as entrevistas, e novos movimentos mecânicos foram adicionados. Devido ao corrente contexto de pandemia Covid-19 e à dificuldade em encontrar as ferramentas e laboratórios, não foi possível verificar devidamente a produção de Sinestesia.
ABSTRACT: This thesis project began in a prototyping laboratory in Naples, the author designed a laser cut lamp, whose concept was to show shapes through light rather than simply illuminate. The intuition to make it move according to sound came naturally, using light as a means of communication and music as the message to be visually translated. The resulting product brought the investigation to the following questions: why the combination of light and sound was apparently ‘captivating’ and why the choice to work on a tangible product and not digitally. The research phase began, shaping the state of the art of the dissertation. There, a series of indispensable sources on the biological and psychological implications of sound and light began to surface three fundamental concepts: Psychoacoustics, Synaesthesia and Graspable Objects. Observing the music landscape, the way artists present themselves presencially, on music platforms and social network, brings to the following reflection: our experience underlines the possibility to complete the auditory experience involving another sense: sight. Recognising the importance of Synaesthetic objects, a research was carried out tracing a chronology. The result was a collection of a series of figures involved in Colour Music, a discipline that progressed hand in hand with music from around 1590 to the present day. Having identified audio-visual synaesthesia as the basis and dealing with the design of the light, the target audience was identified as singers and musicians. Through the interviews the artists expressed difficulty in having something available for their performances to accompany the music and capture the mind of the spectators. Thanks to the artists, emerged elements for re-design. The result of this re-design are three different objects, for the expressed need to communicate the various frequencies of music, one for each prototype. Colours were also introduced, and new mechanical movements were introduced. Due to the current pandemic Covid-19 and the difficulty in finding the right tools and laboratories, it was not possible to properly verify the production of Synesthesia.
N/A
Liu, Qirui. "Developing office building design." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/85124.
Повний текст джерелаMaster of Architecture
Čičmanová, Erika. "Stage design invisible, aneb hranice scénografie." Master's thesis, Akademie múzických umění v Praze. Divadelní fakulta AMU. Knihovna, 2008. http://www.nusl.cz/ntk/nusl-79058.
Повний текст джерелаDhakal, Pratik. "EFFICIENT EARLY STAGE CHEMICAL PROCESS DESIGN." Miami University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=miami1533323971644795.
Повний текст джерелаBlyth, Karl Anthony. "A computer model that forecats the cash flow of building projects at the tender stage using stage payments." Thesis, University of Liverpool, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.288114.
Повний текст джерелаGogan, Paul Clark. "The architecture and planning of a tall building." Thesis, Virginia Polytechnic Institute and State University, 1992. http://hdl.handle.net/10919/53319.
Повний текст джерелаNovotný, Petr. "Obchodní a administrativní centrum." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227699.
Повний текст джерелаMahmoud, M. A. "Factory building : Design knowledge engineering." Thesis, University of Strathclyde, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.382426.
Повний текст джерелаAlzaed, Ali. "User centered passive building design." Thesis, University of Liverpool, 2012. http://livrepository.liverpool.ac.uk/9873/.
Повний текст джерелаHerrera, Juan Jr. "The vertical-mill stage : design of a vertical movement stage for surface machining." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/40432.
Повний текст джерела"May 2007."
To allow the widespread use of three dimensional patterns on walls, the manufacturing cost must be reduced. The goal of this project is to design a machine for vertical axis movement which can be measured and controlled. The key issues addressed in this thesis, are the motion past obstacles in the extrusions, a lightweight mechanism that is stiff with minimal horizontal deflections, can adjust to different heights and can support its own weight. The design favored consisted of a chain drive designed to travel 3 meters in 10 seconds at a weight of 30 Kilograms. The machine is kept in place by five points of contact, including a fixed sprocket and four sliding V-grooved rollers. The machine was tested for stability, stiffness and its ability to traverse the entire chain without problems.
by Juan Herrera.
S.B.
Rosensweig, Ryan R. "Elevating Design: Building Design as a Dynamic Capability." University of Cincinnati / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1306498990.
Повний текст джерелаCai, Xiaochi. "Ship response estimation in early design stage." Thesis, KTH, Marina system, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-198505.
Повний текст джерелаStratmann, Johannes Philipp. "Engineering management of early stage warship design." Thesis, University of Southampton, 2006. https://eprints.soton.ac.uk/142859/.
Повний текст джерела