Готові списки джерел за темами / Bismuth Based Materials

Добірка наукової літератури з теми "Bismuth Based Materials"

Автор: Grafiati

Опубліковано: 14 березня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Bismuth Based Materials".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Bismuth Based Materials"

Ghanem, A. H., A. T. M. Farag, Abdullah G. Al-Sehemi, Ahmed Al-Ghamdi, W. A. Farooq, and F. Yakuphanoglu. "Bismuth Borate Glass Based Nuclear Materials." Silicon 10, no. 3 (January 16, 2018): 1195–201. http://dx.doi.org/10.1007/s12633-017-9593-2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lukyanova, L. N., O. A. Usov, M. P. Volkov, and I. V. Makarenko. "Topological Thermoelectric Materials Based on Bismuth Telluride." Nanobiotechnology Reports 16, no. 3 (May 2021): 282–93. http://dx.doi.org/10.1134/s2635167621030125.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Miller, Nichole Cates, and María Bernechea. "Research Update: Bismuth based materials for photovoltaics." APL Materials 6, no. 8 (August 2018): 084503. http://dx.doi.org/10.1063/1.5026541.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mao, Jun, Hangtian Zhu, Zhiwei Ding, Zihang Liu, Geethal Amila Gamage, Gang Chen, and Zhifeng Ren. "High thermoelectric cooling performance of n-type Mg3Bi2-based materials." Science 365, no. 6452 (July 18, 2019): 495–98. http://dx.doi.org/10.1126/science.aax7792.

Повний текст джерела

Анотація:

Thermoelectric materials have a large Peltier effect, making them attractive for solid-state cooling applications. Bismuth telluride (Bi2Te3)–based alloys have remained the state-of-the-art room-temperature materials for many decades. However, cost partially limited wider use of thermoelectric cooling devices because of the large amounts of expensive tellurium required. We report n-type magnesium bismuthide (Mg3Bi2)–based materials with a peak figure of merit (ZT) of ~0.9 at 350 kelvin, which is comparable to the commercial bismuth telluride selenide (Bi2Te3–xSex) but much cheaper. A cooling device made of our material and p-type bismuth antimony telluride (Bi0.5Sb1.5Te3) has produced a large temperature difference of ~91 kelvin at the hot-side temperature of 350 kelvin. n-type Mg3Bi2-based materials are promising for thermoelectric cooling applications.

Стилі APA, Harvard, Vancouver, ISO та ін.

Xiong, Jun, Pin Song, Jun Di, Huaming Li, and Zheng Liu. "Freestanding ultrathin bismuth-based materials for diversified photocatalytic applications." Journal of Materials Chemistry A 7, no. 44 (2019): 25203–26. http://dx.doi.org/10.1039/c9ta10144f.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Reichmann, Klaus, Antonio Feteira, and Ming Li. "Bismuth Sodium Titanate Based Materials for Piezoelectric Actuators." Materials 8, no. 12 (December 4, 2015): 8467–95. http://dx.doi.org/10.3390/ma8125469.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gomah-Pettry, J. "Sodium-bismuth titanate based lead-free ferroelectric materials." Journal of the European Ceramic Society 24, no. 6 (2004): 1165–69. http://dx.doi.org/10.1016/s0955-2219(03)00473-4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lee, Lana C., Tahmida N. Huq, Judith L. MacManus-Driscoll, and Robert L. Z. Hoye. "Research Update: Bismuth-based perovskite-inspired photovoltaic materials." APL Materials 6, no. 8 (August 2018): 084502. http://dx.doi.org/10.1063/1.5029484.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Devillers, M., O. Tirions, L. Cadus, P. Ruiz, and B. Delmon. "Bismuth Carboxylates as Precursors for the Incorporation of Bismuth in Oxide-based Materials." Journal of Solid State Chemistry 126, no. 2 (November 1996): 152–60. http://dx.doi.org/10.1006/jssc.1996.0323.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Li, Feng, Tao Jiang, Jiwei Zhai, Bo Shen, and Huarong Zeng. "Exploring novel bismuth-based materials for energy storage applications." Journal of Materials Chemistry C 6, no. 30 (2018): 7976–81. http://dx.doi.org/10.1039/c8tc02801j.

Повний текст джерела

Анотація:

A novel bismuth-based material of hot-pressed (Bi_0.5K_0.5)TiO₃–0.06La(Mg_0.5Ti_0.5)O₃ ceramic with an ultrahigh energy storage density and fast discharge speed.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Bismuth Based Materials"

Cadevall, Riera Miquel. "Bismuth based (nano)materials and platforms for (bio)sensing." Doctoral thesis, Universitat Autònoma de Barcelona, 2014. http://hdl.handle.net/10803/285769.

Повний текст джерела

Анотація:

La tesi està basada en la fabricació de nous sensors i biosensors per a la detecció de contaminants. Els micro i nanomateials basats en bismut semblen ser materials molt apropiats per aconseguir aquest objectiu, tanmateix també s’han proposat altres plataformes sensores. En el primer capítol es descriuen detalladament els principals objectius d’aquesta tesi. La introducció d’aquesta tesi descriu les aplicacions més recents i rellevants basades en la utilització de nanomaterials de bismut, com ara en els camps de la medicina, la fotodegradació de contaminants orgànics, la cosmètica, els pigments o els aliatges. Aquesta part precedeix la descripció dels mètodes de síntesi més innovadors, dels sensors més eficients, bàsicament de metalls pesants, i de les aplicacions en el camp dels biosensors. Aquest recull es pot trobar al capítol 2. Les nanopartícules de bismut són una bona plataforma per a sensors i biosensors. En aquest sentit s’ha estudiat la modificació d’elèctrodes serigrafiats amb nanopartícules de bismut. En el capítol 3, s’avaluen diferents mètodes de síntesi de nanopartícules de bismut amb l’objectiu d’obtenir les nanopartícules més eficients en la detecció de metalls pesants; en aquest cas centrat en la detecció de cadmi i plom. Al capítol 4 es presenta una nova estratègia de modificació d’elèctrodes. Aquesta estratègia es basa en la utilització de nanopartícules core-shell. Tenint en compte l’avantatge que dóna el recobriment de bismut, aquestes nanopartícules s’han utilitzat en la detecció de metalls pesants en diferents plataformes sensores. La bona modificació d’aquests elèctrodes es demostra clarament fent cicles de modificat i neteja; el comportament d’aquests elèctrodes modificat es podria considerar com a una resposta digital. L’última plataforma sensora per a metalls pesants proposada es basa en xips de paper. El capítol 5 descriu la fabricació i optimització d’aquests dispositius. Aprofitant la capacitat de filtrar del substrat de paper de filtre, aquestes simples plataformes són capaces de detectar plom i cadmi en diferents matrius, com ara solució tampó, aigua de mar o fangs. En aquest últim capítol es mostra la integració de les nanopartícules de bismut en un biosensor de fenol, basat en l’activitat enzimàtica de la tirosinasa. El capítol 6 inclou la caracterització morfològica i electroquímica del sensor. Aquests elèctrodes modificats amb nanopartícules de bismut i tirosinasa tenen una molt bona resposta en la detecció de fenol i catecol i un baix efecte de les interferències. Finalment al capítol 7 hi ha les conclusions generals i les futures perspectives que obre aquest treball. En els annexos s’hi pot trobar una descripció dels mètodes de fabricació de les diferents plataformes sensores, les abreviatures utilitzades i la producció científica derivada d’aquest treball.
The thesis is focused on the fabrication of new sensing and biosensing platforms for pollutants detection. Although bismuth-based micro and nanomaterials seem to be the appropriated materials to achieve this objective nevertheless new platforms including for example those based on paper are also proposed. In the first chapter the main objectives of this thesis are described in detail. The introduction part (chapter 2) of this thesis is dedicated to the revision of the recent reports / achievements on bismuth-based nanomaterials in different application fields that include medicine, photodegradation of organic pollutants, cosmetics, pigments and alloys. An important section of this part is focused on the description of the effect of bismuth-based materials in heavy metals and biosensing applications. Bismuth nanoparticles are found as an innovative material in heavy metals sensing and biosensing applications. A study on the effect of the modification of screen-printed electrodes with bismuth nanoparticles and its use for the heavy metal detection is shown (chapter 3). Different modifications of polyol based bismuth nanoparticles synthesis have been evaluated in aim to obtain the more efficient nanoparticles with interest in heavy metal sensing. In addition the results obtained for the detection of lead and cadmium is also shown in the same chapter. In the chapter 4 a new electrode modification strategy is presented. This new strategy is based on the use of magnetic core/shell bismuth nanoparticles. Taking advantages of the bismuth oxide presence onto the shell of these nanoparticles, heavy metal detection in different On-Off sensing platforms is shown. The modification of electrodes is clearly demonstrated by doing cycles with both modification and cleaning of the electrodes obtaining a kind of digital (On-Off) response of heavy metals. To solve sampling and sample pretreatment issues a heavy metal sensing platform that uses a paper-based lateral flow chip is also developed and described at chapter 5. Fabrication and the optimization of this new heavy metal sensor are shown; it takes advantage of the use of a filter paper substrate. This new platform is capable to detect lead and cadmium in different matrixes including mud. In the last chapter (chapter 6), the integration of bismuth nanoparticles into a phenol biosensing system is shown. It takes advantages of the use of tyrosinase enzyme which brings certain selectivity in phenolic compounds detection. Morphological and electrochemical characterizations of the developed biosensor also are shown in this chapter. The developed biosensor shows good performance in catechol detection. Finally in the chapter 7 the general conclusions and some future perspectives are given.

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Liping. "Development of Bismuth Oxide-Based Materials for Iodide Capture and Photocatalysis." Kent State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=kent1542652670479038.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Back, Michele <1984&gt. "Bismuth-based advanced luminescent (nano)materials: from design to application." Doctoral thesis, Università Ca' Foscari Venezia, 2016. http://hdl.handle.net/10579/10319.

Повний текст джерела

Анотація:

L’attività di ricerca oggetto della tesi è focalizzata sullo studio di materiali nanostrutturati e non a base di bismuto e relativi composti aventi proprietà ottiche avanzate. Nello specifico, data la peculiare attività di luminescenza, per i materiali investigati si prevedono interessanti potenzialità per applicazioni come (nano)fosfori per la fotonica, nel bioimaging, come sensori termici, nell’anticontraffazione. La parte preponderante della ricerca ha quindi riguardato la caratterizzazione ottica dei sistemi oggetto di studio e, in particolare, la definizione e la modellizzazione dei meccanismi di luminescenza. Inoltre, al fine di incrementare l’efficienza e di aumentare il controllo della risposta in emissione, è stata sviluppata anche un’approfondita attività in relazione allo studio dell’evoluzione strutturale del materiale e all’ottimizzazione dei processi di sintesi. Nell’ambito della macrotematica relativa ai (nano)materiali a base di bismuto, di seguito vengono specificati i sistemi oggetto della ricerca: a) controllo della struttura in nanoparticelle di bismuta drogata con ioni lantanidi e studio dei processi di upconversion (UC) per l’attivazione delle emissioni di fluorescenza nel visibile tramite pompaggio ottico nell’IR; b) studio del meccanismo di formazione di sistemi core-shell in nanoparticelle di silicato di bismuto drogate con ioni lantanidi; c) studio delle fluorescenze dello ione Cr3+ in Bi2Ga4O9 e definizione delle potenzialità per l’utilizzo come sensore termico luminescente; d) stabilizzazione dei polimorfi della bismuta tramite confinamento quantico in strutture a dimensionalità ridotta e studio delle proprietà ottiche; e) studio della luminescenza “persistente” nel sistema Bi2+/3+ in CaSnO3; f) sintesi di nanoparticelle di Y2O3 drogate con ioni Bi3+ e Er3+ e studio dei processi di energy transfer.

Стилі APA, Harvard, Vancouver, ISO та ін.

White, John B. "Application of Thermomechanical Characterization Techniques to Bismuth Telluride Based Thermoelectric Materials." Thesis, University of North Texas, 2002. https://digital.library.unt.edu/ark:/67531/metadc3166/.

Повний текст джерела

Анотація:

The thermoelectric properties of bismuth telluride based thermoelectric (TE) materials are well-characterized, but comparatively little has been published on the thermomechanical properties. In this paper, dynamic mechanical analysis (DMA) and differential scanning calorimetry data for bismuth telluride based TE materials is presented. The TE materials' tan delta values, indicative of viscoelastic energy dissipation modes, approached that of glassy or crystalline polymers, were greater than ten times the tan delta of structural metals, and reflected the anisotropic nature of TE materials. DMA thermal scans showed changes in mechanical properties versus temperature with clear hysteresis effects. These results showed that the application of DMA techniques are useful for evaluation of thermophysical and thermomechanical properties of these TE materials.

Стилі APA, Harvard, Vancouver, ISO та ін.

Mortensen, Clay Dustin. "The effect of grain size, alloy composition and turbostratic disorder on the thermal and electrical properties of Bi₂Te₃ based materials /." Connect to title (abstract only) online (ProQuest), 2008. http://proquest.umi.com/pqdweb?did=1690937581&sid=1&Fmt=2&clientId=11238&RQT=309&VName=PQD.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zanella, Sofia <1993&gt. "Luminescent materials based on lanthanide doped bismuth oxyfluoride particles for nanophosphor and nanothermometer applications." Master's Degree Thesis, Università Ca' Foscari Venezia, 2019. http://hdl.handle.net/10579/14410.

Повний текст джерела

Анотація:

The project is focus on the synthesis and characterization of lanthanide bismuth oxyfluoride particles. The samples are synthesized through homogeneous precipitation using a microwave reactor to heat. Furthermore, by doping with different lanthanides (Tb, Eu, Tb-Eu; Pr; Nd; Yb-Ln, Ln=Er,Yb,Tm) it is tested how the optical response of the systems can be in terms of luminescence spectroscopy. The synthesized Ln3+ NPs are tested for the biological applications as nanothermometer. In recent times Luminescent nanothermometers have been widely investigated because they relate the local temperature of a biological system with their emission, as a result of an external radiation. Through these systems there is the possibility of excitation and / or emission in the so-called first and second biological window. The studies of these project are focused on NPs doped Ln3+ as thermal and emitting probes.

Стилі APA, Harvard, Vancouver, ISO та ін.

Karlsson, Viktor. "Thermoelectric Cooler Prototype Based on Bismuth Telluride and Aimed for Space Applications." Thesis, Uppsala universitet, Tillämpad materialvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-337295.

Повний текст джерела

Анотація:

The main goal for this project was to design, manufacture and evaluate a thermoelectric cooler, TEC, prototype. One of the biggest challenges with TECs is that they need to be very reliable and have a long lifetime. The two biggest contributing factors to degradation and breakdown stem from thermal expansion mismatch, resulting in cracks, and from material diffusion between the thermoelectric material and connecting materials. The thermoelectric material in this case is Bismuth telluride, Bi2Te3, obtained from two suppliers. The thermoelectric cooler prototype was successfully manufactured. The prototype, which consisted of 38 thermoelectric elements, showed a maximum temperature difference of 65.1 degrees Celsius. A commercial TEC of the same size had a maximum temperature difference of 68 degrees Celsius. The figure of merit and grain size of p- and n-doped Bismuth Telluride from two different suppliers have been measured as means of testing the thermoelectric material prior to manufacturing, and to compare the suppliers. In this report, the figure of merit is a measure of how well a material converts electrical current to a heat gradient. The figure of merit for bismuth telluride, Bi2Te3, from both suppliers was found to be between 0.4 and 0.8 through the Harman method. Since studies show that smaller grains for Bi2Te3 result in a more durable material, the morphology was investigated. However, no grains could be observed with light optical microscopy with an applied etchant, or scanning electron microscopy. A cohesion tape test showed that Bismuth telluride from one of the suppliers is more fragile than the other.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hutton, William Antony D. I. "Investigations into the structure, thermal stability and electrical properties of various bismuth-based oxides, including Sillenite materials." Thesis, University of Sheffield, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.419264.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ordon, Karolina. "Functionalized semiconducting oxides based on bismuth vanadate with anchored organic dye molecules for photoactive applications." Thesis, Le Mans, 2018. http://www.theses.fr/2018LEMA1006/document.

Повний текст джерела

Анотація:

La recherche de nouveaux matériaux en tant que photocatalyseurs en lumière visible pour la dépollution de l’environnement (eaux, atmosphères) est un domaine de recherche très actif et suscite l’intérêt d’une large communauté scientifique en Physique, Chimie et Sciences des matériaux. Des recherches exhaustives sont actuellement menées pour améliorer l’efficacité photocatalytique de certaines classes de matériaux photoactifs connus, et pour développer la synthèse de nouveaux matériaux fonctionnels. Dans ce contexte, les semiconducteurs oxydes photoactifs à base de vanadates de bismuth (BiVO4) possédant une bande électronique au milieu du spectre visible, offrent une sérieuse alternative aux photocatalyseurs classiques efficaces (TiO2, ZnO) dont la photo-excitation requiert uniquement la fraction UV du spectre solaire. Le travail effectué dans le cadre de cette thèse est donc dédié aux matériaux à base BiVO4 sous forme d’architectures mésoporeuses ou d’assemblages hybrides associant des groupes organiques à transfert de charges.Deux contributions majeures ont été développées dont la première portant sur la réalisation expérimentale d’architectures mésoporeuses inédites, fonctionnalisées par des groupes organiques sensibilisateurs et l’étude de leurs propriétés électroniques et optiques en vue d’optimiser leurs efficacités photocatalytiques. La deuxième partie porte sur des simulations numériques de nanostructures hybrides par des approches exploitant la méthode DFT, ab-initio ou des modèles de chimie quantique. Des systèmes modèles ont été construits associant des nanoclusters (NC) et des groupes organiques (GO). Les propriétés électroniques et optiques ainsi que les caractéristiques structurelles et vibrationnelles des systèmes (NC-GO) ont été déterminées et confrontées aux données expérimentales. Les phénomènes de transfert de charges impliqués entre les groupes organiques et la structure inorganique ont été caractérisés ainsi que leur rôle dans l’efficacité des réponses photo-catalytiques des systèmes hybrides
The search for new materials as photocatalysts invisible light for the depollution of the environment (waters, atmospheres) is a very active field of research and attracts the interest of a large scientific community in Physics, Chemistry and Materials Science. Recent research developpements are conducted to improve the photocatalytic efficiency of certain classes of known photoactive materials, and to develop the synthesis of new functional materials. In this context, photoactive oxide semiconductors based on bismuth vanadate (BiVO4) having an electronic band in the middle of the visible spectrum, offer a serious alternative to efficient conventional photocatalysts (TiO2, ZnO) whose photo-excitation requires only the UV fraction of the solar spectrum.The work done in this thesis is therefore dedicated toBiVO4-based materials in the form of mesoporous architectures or hybrid assemblies associating organic groups with charge transfer processes. Two major contributions have been developed, one of which is the experimental realization of novel mesoporous architectures, functionalized by sensitizing organic groups and the study of their electronic and optical properties in order to optimize their photocatalytic efficiencies. The second part deals with numerical simulations of hybrid nanostructures using approaches as the DFT method, ab-initio or quantum chemistry codes. Model systems have been constructed associating BiVO4nanoclusters (NC) and organic groups (GO). The electronic and optical properties as well as the structural and vibrational characteristics of the systems (NC-GO) were determined and compared with the experimental data. The charge transfer phenomena involved between the organic groups and the inorganic structure were characterized as well as their role in the efficiency of photo-catalytic responses of hybrid systems

Стилі APA, Harvard, Vancouver, ISO та ін.

Pacher, Fernandes Rodrigo [Verfasser]. "Piezoresponse Force Microscopy study of potassium sodium niobate and bismuth sodium titanate based lead-free ferroelectric materials / Rodrigo Pacher Fernandes." München : Verlag Dr. Hut, 2014. http://d-nb.info/1049362829/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Bismuth Based Materials"

Gondal, Md Ashraf, Chang Xiaofeng, and Md Abdulkader Dastageer. Novel Bismuth-Oxyhalide-Based Materials and their Applications. New Delhi: Springer India, 2017. http://dx.doi.org/10.1007/978-81-322-3739-6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

NAYAK. Bismuth-Based Materials Environmental Hb: Bismuth-Based Materials for Environmental Remediation. Institute of Physics Publishing, 2022.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bismuth-Based Nanostructured Materials [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.100681.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Pietro, Paola Di. Optical Properties of Bismuth-Based Topological Insulators. Springer, 2013.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Pietro, Paola Di. Optical Properties of Bismuth-Based Topological Insulators. Springer International Publishing AG, 2016.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Pietro, Paola Di. Optical Properties of Bismuth-Based Topological Insulators. Springer, 2013.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gondal, Mohammed A., Chang Xiaofeng, and Mohamed A. Dastageer. Novel Bismuth-Oxyhalide-Based Materials and their Applications. Springer, 2018.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gondal, Ashraf, Mohammed A. Gondal, Chang Xiaofeng, and Mohamed A. Dastageer. Novel Bismuth-Oxyhalide-Based Materials and Their Applications. Springer (India) Private Limited, 2017.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Bismuth Based Materials"

Wu, Jiagang. "Bismuth Ferrite-Based Piezoelectric Materials." In Advances in Lead-Free Piezoelectric Materials, 301–78. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8998-5_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Takenaka, Tadashi. "Bismuth-based Piezoelectric Ceramics." In Piezoelectric and Acoustic Materials for Transducer Applications, 103–30. Boston, MA: Springer US, 2008. http://dx.doi.org/10.1007/978-0-387-76540-2_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Li, Gang, and Shumin Wang. "Quantum Spin Hall States in 2D Bismuth-Based Materials." In Bismuth-Containing Alloys and Nanostructures, 351–79. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8078-5_15.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Christianson, Anna M., and François P. Gabbaï. "Antimony- and Bismuth-Based Materials and Applications." In Main Group Strategies towards Functional Hybrid Materials, 405–32. Chichester, UK: John Wiley & Sons, Ltd, 2018. http://dx.doi.org/10.1002/9781119235941.ch16.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Boukamp, B. A., K. J. Vries, and A. J. Burggraaf. "Surface Oxygen Exchange in Bismuth Oxide Based Materials." In Non-Stoichiometric Compounds, 299–309. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-0943-4_20.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ren, Wei, Xue Quan Liu, Xiao Lin Wang, and Hong Yi Jiang. "Thermoelectric Properties of Bismuth Telluride Based Materials Prepared by Powder Metallurgy Processing." In Key Engineering Materials, 864–67. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.864.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Moreland, John, C. K. Chiang, and L. J. Swartzendruber. "Break Junction Tunneling Spectroscopy of Single-Crystal Bismuth-Based High-Temperature Superconductors." In Advances in Cryogenic Engineering Materials, 619–25. Boston, MA: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4613-9880-6_80.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yashkina, S., V. Doroganov, E. Evtushenko, O. Gavshina, and E. Sysa. "Phase Changes in Radiation Protection Composite Materials Based on Bismuth Oxide." In Springer Proceedings in Earth and Environmental Sciences, 296–99. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22974-0_71.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Moscow, S., and K. Jothivenkatachalam. "Bismuth Vanadate Based Nanostructured and Nanocomposite Photocatalyst Materials for Water Splitting Application." In Advances in Nanostructured Composites, 376–91. Boca Raton, FL : CRC Press, Taylor & Francis Group, [2018] | Series: Advances in nanostructured composites ; volume 2 | “A science publishers book.»: CRC Press, 2019. http://dx.doi.org/10.1201/9780429021718-18.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Monfort, Olivier, Olivier Monfort, Panagiotis Lianos, and Gustav Plesch. "Design of Bismuth Vanadate-Based Materials: New Advanced Photoanodes for Solar Hydrogen Generation." In Photoelectrochemical Solar Cells, 219–49. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119460008.ch6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Bismuth Based Materials"

Rajeswari, R., M. R. Biswal, J. Nanda, and N. C. Mishra. "Multiferroic bismuth ferrite material core based inductive displacement sensor." In FUNCTIONAL MATERIALS: Proceedings of the International Workshop on Functional Materials (IWFM-2011). AIP, 2012. http://dx.doi.org/10.1063/1.4736914.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hoye, Robert. "Bismuth-based perovskite-inspired materials for energy harvesting and solar fuels." In Materials for Sustainable Development Conference (MAT-SUS). València: FUNDACIO DE LA COMUNITAT VALENCIANA SCITO, 2022. http://dx.doi.org/10.29363/nanoge.nfm.2022.019.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Abraham, Thomas, S. Kannan, R. N. Priyanka, Subi Joseph, Mamatha Susan Punnoose, Anu Rose Chacko, and Beena Mathew. "A novel lanthanum and bismuth based self-cleaning nanocomposite for organic pollutants." In INTERNATIONAL CONFERENCE ON MULTIFUNCTIONAL MATERIALS (ICMM-2019). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0019547.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Fukuchi, Yutaka, and Joji Maeda. "Characteristics of Amplitude-Equalized Rational Harmonic Mode-Locked Short-Cavity Fiber Ring Laser Using a Bismuth-Oxide-Based Erbium-Doped Fiber and a Bismuth-Oxide-Based Highly Nonlinear Fiber." In Nonlinear Optics: Materials, Fundamentals and Applications. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/nlo.2011.nwe13.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Casadio, Simone, Angela Gondolini, Nicola Sangiorgi, and Alessandra Sanson. "BISMUTH-BASED AURIVILLIUS PHOTO-ELECTRODES FOR THE FERROELECTRIC-ENHANCED PHOTOELECTROCHEMICAL REDUCTION OF CO2." In Materials for Sustainable Development Conference (MAT-SUS). València: FUNDACIO DE LA COMUNITAT VALENCIANA SCITO, 2022. http://dx.doi.org/10.29363/nanoge.nfm.2022.073.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Takai, Toshihide, Tomohiro Furukawa, Shigeki Watanabe, and Noriko S. Ishioka. "Corrosion Behavior of Iron-Chrome Alloys in Liquid Bismuth." In 2021 28th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/icone28-63277.

Повний текст джерела

Анотація:

Abstract For the mass production of astatine-211, a promising radiopharmaceutical for cancer treatment, the National Institute for Quantum and Radiological Science and Technology has proposed the innovative “Liquid Bismuth Target System.” The target window in this system must be made from a material that resists the highly corrosive liquid bismuth environment. To meet this requirement, a promising target window material was selected in corrosion experiments performed in stagnant liquid bismuth. Based on knowledge of corrosion in liquid lead–bismuth eutectic gained during the development of fast reactors and accelerator-driven subcritical systems, FeCrMo–alloy, FeCrAl–alloy, and austenitic stainless steel (as a reference) were selected as the specimen materials. Experiments were carried out under saturated dissolved oxygen and low oxygen conditions, and the corrosion behaviors of the specimens were evaluated, mainly by scanning electron microscopy. The FeCrAl–alloy exhibited the most excellent corrosion resistance, followed by FeCrMo–alloy. Both materials are suitable candidates for the target window. Although austenitic stainless steel was less corrosion resistant than the former two materials, it is a likely applicable for the target window under appropriately limited operation conditions (such as irradiation current and exposure time) of the liquid bismuth target system.

Стилі APA, Harvard, Vancouver, ISO та ін.

AZUMA, Masamichi. "Material Optimization of Bismuth Based Mixed Layered Superlattice Ferroelectrics for High Performance FeRAMs." In 1996 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 1996. http://dx.doi.org/10.7567/ssdm.1996.sympo.ii-6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Plutenko, T. A., O. I. V'yunov, and A. G. Belous. "Complex impedance analyses of PTCR ceramics based on barium-lithium-bismuth titanate." In 2014 IEEE International Conference on Oxide Materials for Electronic Engineering (OMEE). IEEE, 2014. http://dx.doi.org/10.1109/omee.2014.6912364.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Plutenko, Tetiana, Oleg V'yunov, Anatolii Belous, Oleksandr Fedorchuk, Oleg Yanchevskii, and Yuriy Stupin. "Barium Titanate Based High-Temperature Dielectric Materials Doped with Bismuth, Sodium, Lithium for Metamaterial Application." In 2022 IEEE 41st International Conference on Electronics and Nanotechnology (ELNANO). IEEE, 2022. http://dx.doi.org/10.1109/elnano54667.2022.9926992.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sun, Yangshan, and Guangyin Yuan. "IMPROVEMENT OF TENSILE STRENGTH AND CREEP RESISTANCE OF Mg-9Al BASED ALLOY WITH BISMUTH AND ANTIMONY ADDITIONS." In Processing and Fabrication of Advanced Materials VIII. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812811431_0087.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!