Дисертації з теми "Bioreactors design"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Bioreactors design".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Ntwampe, Seteno Karabo Obed. "Multicapillary membrane bioreactor design." Thesis, Cape Peninsula University of Technology, 2005. http://hdl.handle.net/20.500.11838/897.
Повний текст джерелаThe white rot fungus, Phanerochaete chrysosporium, produces enzymes, which are capable of degrading chemical pollutants. It was detennined that this fungus has multiple growth phases. The study provided infonnation that can be used to classify growth kinetic parameters, substrate mass transfer and liquid medium momentum transfer effects in continuous secondary metabolite production studies. P. chrysosporium strain BKMF 1767 (ATCC 24725) was grown at 37 QC in single fibre capillary membrane bioreactors (SFCMBR) made of glass. The SFCMBR systems with working volumes of 20.4 ml and active membrane length of 160 mm were positioned vertically. Dry biofilm density was determined by using a helium pycnometer. Biofilm differentiation was detennined by taking samples for image analysis, using a Scanning Electron Microscope at various phases of the biofilm growth. Substrate consumption was detennined by using relevant test kits to quantify the amount, which was consumed at different times, using a varying amount of spore concentrations. Growth kinetic constants were detennined by using the substrate consumption and the dry biofilm density model. Oxygen mass transfer parameters were determined by using the Clark type oxygen microsensors. Pressure transducers were used to measure the pressure, which was needed to model the liquid medium momentum transfer in the lumen of the polysulphone membranes. An attempt was made to measure the glucose mass transfer across the biofilm, which was made by using a hydrogen peroxide microsensor, but without success.
Miller, Stanley David 1960. "Mass separation techniques for the design of fixed film bioreactors." Thesis, The University of Arizona, 1988. http://hdl.handle.net/10150/276846.
Повний текст джерелаCAPUANA, Elisa. "Design of perfusion bioreactors and PLLA-based scaffolds for in vitro tissue engineering." Doctoral thesis, Università degli Studi di Palermo, 2022. https://hdl.handle.net/10447/562180.
Повний текст джерелаTissue engineering (TE) represents a novel approach that uses cells integrated with matrices to achieve the formation of new tissues. In this strategy, three essential components constitute the so-called triad of Tissue Engineering: regulatory signals, cells, and three-dimensional (3D) biodegradable porous scaffolds. They are combined to develop an organized 3D functional tissue that mimics the extracellular matrix (ECM) of tissue to be regenerated. The tissue-specific functions of native tissues are linked to complex environments that can be replicated outside the body by using special devices called bioreactors. These systems provide an environment where specific parameters can be controlled to match desired biological conditions. In this thesis, all these components are accounted for developing in vitro models for various applications in the field of Tissue Engineering. Specifically, poly-(L-lactic acid) (PLLA)-based scaffold, scaffold fabrication via phase separation, static cell cultures, and dynamic cell cultures using perfusion bioreactors are analyzed and discussed. Two main sections compose this thesis: several experimental setups using PLLA-based scaffolds for various in vitro systems; and the design and modeling of a custom perfusion bioreactor using computational fluid dynamics (CFD) and mathematical equations. A rigorous theoretical framework is developed to study the properties of PLLA biomaterial, the use of perfusion bioreactor for regenerative medicine, and models developed for investigating cells growth on 3D matrices cultured within a dynamic system. In the experiments, the morphology of different PLLA scaffolds produced through different protocols of the thermally induced phase separation technique (TIPS) is analyzed according to the targeted properties of TE scaffolds, i.e., porosity, pore interconnectivity, and pore size. Cell cultures are performed in these constructs to create a 3D environment so that seeded cells can grow both in static 3D culture and the perfusion bioreactor. Cell proliferation and adhesion are observed up to 7 days of in vitro culture, demonstrating that scaffold morphology can induce cell growth under both static and dynamic conditions. For the second part, a combined modeling and experimental approach is followed. The custom-made perfusion apparatus is an existing airlift bioreactor that provides a low-shear environment with good mixing, resolving mass transport limitations and providing physical stimuli beneficial for overall cells proliferation and differentiation. The hydrodynamics (gas holdup, superficial liquid velocity, and shear rate) and mass transfer (kLa and the volumetric mass transfer coefficient) are modeled and determined by CFD to examine the influence of Abstract iii these features on cell and tissue growth. The simulation results indicate that the hydrodynamics matched the mathematical data and experimental validation. Then, osteoblast cells are cultured on a support in the bioreactor perfused with culture medium at 10mL/min for up to 6 days. An evaluation combining proliferation results and statistical analysis allows the quantification of cell growth as a function of the space inside the system. Given the hierarchical nature of the bioreactor-scaffold system, its multi-scale nature will be considered, ranging from the extracellular matrix scale to the bioreactor scale. The flow-dependent properties of an engineered matrix cultured within a perfusion bioreactor are studied theoretically and evaluated experimentally, emphasizing the influence of inter-scale dependencies. Perfusion bioreactors are in vitro systems beneficial for drug screening because they mimic the in vivo environment. For this purpose, an optimized design of the airlift bioreactor that can induce a double-flow on a hollow scaffold is theoretically and experimentally validated. Specifically, the system is tested for carriers diffusion and air-liquid-interface (ALI) model to reproduce the nasal mucosa environment. The rationale is to combine an internal and an external flow of independent fluids for either diffusing the carriers throughout the engineered matrix for drug prescreening or redirecting the culture medium to feed the cells seeded into the channel of the hollow scaffold. In conclusion, this thesis project focuses on the major aspects of tissue engineering and regenerative medicine, varying from in vitro tests for growing cells on scaffolds toward models to study the multi-scale nature of a tissue-like system or recreate the physiology of a native tissue.
Phelan, Michael. "THE DESIGN, CONSTRUCTION, AND VALIDATION OF NOVEL ROTATING WALL VESSEL BIOREACTORS." Master's thesis, Temple University Libraries, 2018. http://cdm16002.contentdm.oclc.org/cdm/ref/collection/p245801coll10/id/488702.
Повний текст джерелаM.S.
The rotating wall vessel (RWV) bioreactor is a well-established cell culture device for the simulation of microgravity for suspension cells and the generation of spheroids and organoids. The key to the success of these systems is the generation of a delicately maintained fluid dynamics system which induces a solid body rotation capable of suspending cells and other particles in a gentle, low-shear environment. Despite the unique capabilities of these systems, the inherently delicate nature of their fluid dynamics makes the RWV prone to multiple failure modes. One of the most frequently occurring, difficult to avoid, and deleterious modes of failure is the formation of bubbles. The appearance of even a small bubble in an RWV disrupts the crucial laminar flow shells present in the RWV, inducing a high-shear environment incapable of maintaining microgravity or producing true spheroids. The difficulty of eliminating bubbles from the RWV substantially increases the learning curve and subsequent barrier-to-entry for the use of this technology. The objective of this study is to create a novel RWV design capable of eliminating the bubble formation failure mode and to demonstrate the design’s efficacy. The tested hypothesis is: “The addition of a channel capable of segregating bubbles from the fluid body of the RWV will protect its crucial fluid dynamics system while enabling the growth of consistently sized and properly formed cell spheroids, improving ease of use of the RWV and decreasing experimental failure.”
Temple University--Theses
Williams, Chrysanthi. "Perfusion bioreactor for tissue-engineered blood vessels." Diss., Available online, Georgia Institute of Technology, 2004:, 2003. http://etd.gatech.edu/theses/available/etd-06072004-131410/unrestricted/williams%5Fchrysantyhi%5F200405%5Fphd.pdf.
Повний текст джерелаHanna, Molin. "Optimal steady-state design of bioreactors in series with Monod growth kinetics." Thesis, Uppsala universitet, Avdelningen för systemteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-338760.
Повний текст джерелаBioreaktorer används för att utföra olika biologiska processer och används vanligen inom biogasproduktion eller för rening av avloppsvatten. Två vanliga hydrauliska modeller som används vid modellering av bioreaktorer är helomblandad bioreaktor (på engelska continuous stirred tank reactor, CSTR) eller pluggflödesreaktor (på engelska plug-flow reactor, PFR). I den här rapporten presenteras ett system av differentialekvationer som används för att beskriva koncentrationerna av substrat, biomassa och inert biomassa i både CSTR och PFR. Ekvationssystemet används för analys och design av en serie CSTRs vid steady-state. Tillväxten av biomassa beskrivs av Monod-kinetik. Avdödning av biomassa är inkluderat i studien. Från ekvationssystemet formulerades två optimeringsproblem som löstes för N CSTRs i serie och för CSTR+PFR. Det första optimerinsproblemet var att minimera substrathalten i utflödet givet en total volym. I det andra minimerades den totala volymen som krävs för att nå en viss substrathalt i utflödet. Resultaten visade att ekvationssystemet kan användas för att hitta den optimala volymsfördelningen som löser optimeringsproblemen. Den optimala volymen för N CSTRs i serie minskade när antalet CSTRs ökade. När N ökade konvergerade resultaten mot de för en CSTR sammankopplad med en PFR. En analys av hur avdödningshastigheten påverkade resultaten visade att en ökad avdödningshastighet gav mindre skillnad mellan de två olika konfigurationerna när den totala volymen hölls konstant. När den totala volymen istället minimerades ledde en ökad avdödningshastighet till att de två konfigurationerna divergerade från varandra. Modellen som presenteras i studien kan användas för att fördela en total reaktorvolym i mindre zoner på ett optimalt sätt och på så vis öka substratomvandlingen, något som kan vara av intresse i exempelvis befintliga avloppsreningsverk där utrymmet är begränsat. En relativt bra approximation till den optimala designen av N CSTRs i serie är att optimera volymerna för en CSTR+PFR, använda volymen för CSTR som första volym i konfigurationen med N CSTR i serie, och sedan fördela den kvarvarande volymen lika mellan de övriga zonerna.
Betts, Jonathan Ian. "The design and characterisation of miniature bioreactors for microbial fermentation process development." Thesis, University College London (University of London), 2006. http://discovery.ucl.ac.uk/1445372/.
Повний текст джерелаMorello, Luca. "Sustainable landfilling: hybrid bioreactors and final storage quality." Doctoral thesis, Università degli studi di Padova, 2017. http://hdl.handle.net/11577/3424792.
Повний текст джерелаIl moderno sistema di deposito finale dei rifiuti in discarica costituisce un passaggio inevitabile nella gestione dei rifiuti solidi. Il suo scopo è chiudere il “ciclo della materia” riportando gli elementi allo stato di immobilità in cui erano prima di essere estratti. Contemporaneamente, l’applicazione del principio di sostenibilità alle discariche prescrive di garantire la salvaguardia ambientale e della salute, assicurando che il rifiuto smaltito diventi chimicamente e bio-chimicamente stabile entro un tempo “ragionevole”. Una “Discarica Sostenibile” deve combinare questi due principi, bilanciando i contributi per ottenere una “chiusura sostenibile del ciclo della materia”. Il potenziamento dei processi biochimici in discarica, con lo scopo di raggiungere più velocemente condizioni che garantiscano la salvaguardia ambientale e terminare la fase di post-chiusura, è uno degli argomenti più dibattuti nella letteratura scientifica inerente alla gestione dei rifiuti. Lo scopo generale del progetto di dottorato è stato contribuire a questo dibattito, mediante lo svolgimento di test in scala di laboratorio utili a simulare l’andamento dei processi in discarica e analizzando lo stato biochimico finale dei rifiuti trattati. La prima parte del lavoro consiste in una panoramica sui processi biochimici in discarica e sulla metodica dei test biochimici in scala di laboratorio. L’approccio usato dallo studente in questa tesi è principalmente sperimentale, basato sulla progettazione, l’esecuzione e la rielaborazione dei dati di svariate simulazioni di discarica in laboratorio. La discussione dei risultati ottenuti è stata propedeutica alla valutazione delle performance dei modelli concettuali testati così come al confronto con altri risultati ottenuti grazie a una approfondita ricerca bibliografica. Il lavoro originale svolto dallo studente può essere diviso in tre progetti principali. Il reattore ibrido Semi-aerobico, Anaerobico, Aerato (S.An.A ®) è una concetto innovativo testato in scala di laboratorio con promettenti risultati per quanto concerne la stimolazione della produzione di metano e la riduzione delle emissioni di lungo termine. Gli effetti del ricircolo del concentrato di percolato da osmosi inversa all’interno del corpo rifiuti di una discarica sono stati analizzati per verificare se possano esistere potenziali accumuli di contaminanti che rendano insostenibile tale pratica. La procedura di Final Storage Quality (FSQ) per determinare la chiusura della fase di aftercare di una discarica è stata testata su un rifiuto sovra-stabilizzato di sui sono state calcolate emissioni totali e la speciazione chimica degli elementi principali.
Hamnström, Johanna. "Design of a Smartphone App for Control of Bioreactors Used for Cell Cultivation." Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-173123.
Повний текст джерелаGill, N. K. "Design and characterisation of parallel miniature bioreactors for bioprocess optimisation and scale-up." Thesis, University College London (University of London), 2008. http://discovery.ucl.ac.uk/1445974/.
Повний текст джерелаRegestein, Lars [Verfasser]. "Design and application of calorimeters for monitoring biological processes in stirred tank bioreactors / Lars Regestein." Aachen : Hochschulbibliothek der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2013. http://d-nb.info/1031109536/34.
Повний текст джерелаGabarrón, Fernández Sara. "Diagnosis, assessment and optimisation of the design and operation of municipal MBRs." Doctoral thesis, Universitat de Girona, 2014. http://hdl.handle.net/10803/145434.
Повний текст джерелаAquesta tesi es centra en la diagnosi, avaluació i optimització del disseny i l’operació dels bioreactors de membranes (BRM) pel tractament d’aigües residuals. Concretament, l’estudi s’ha realitzat dins del marc de treball de set estacions depuradores d’aigües residuals (EDARs) municipals amb tecnologia BRM presents a Catalunya en col·laboració amb l’Agència Catalana de l’Aigua. Primerament s’ha dut a terme la diagnosi de l’estat del disseny i operació dels BRMs i s’han determinat les problemàtiques associades a aquesta tecnologia. Així mateix, s’han avaluat les estratègies d’optimització realitzades i els corresponents costos d’operació. A partir de la diagnosis realitzada, dos dels principals problemes operacionals observats s’han caracteritzat i optimitzat: El ragging i l’optimització de l’eliminació biològica de nitrogen i dels costos d’operació. La recerca presentada en aquesta tesi ha permès diagnosticar l’estat dels BRMs, alhora que ha mostrat possibles vies d’optimització que permetran millorar l’operació i els costos associats a aquesta tecnologia
Pretel, Jolis Ruth. "Environmental and economic sustainability of submerged anaerobic membrane bioreactors treating urban wastewater." Doctoral thesis, Universitat Politècnica de València, 2015. http://hdl.handle.net/10251/58864.
Повний текст джерела[ES] El reactor anaerobio de membranas sumergidas (AnMBR) puede proporcionar el paso deseado hacia un tratamiento sostenible del agua residual, ampliando la aplicabilidad de la biotecnología anaerobia al tratamiento de aguas residuales de baja carga (ej. agua residual urbana) o a condiciones medioambientales extremas (ej. bajas temperaturas de operación). Esta tecnología combina las ventajas de los procesos de tratamiento anaerobio (baja demanda energética gracias a la ausencia de aireación y a la recuperación energética a través de la producción de metano) con los beneficios de la tecnología de membranas (ej. efluente de alta calidad y reducidas necesidades de espacio). Cabe destacar que la tecnología AnMBR permite la posibilidad del autoabastecimiento energético del sistema debido a la generación de biogás. Otros aspectos que se deben considerar en el sistema AnMBR son el potencial de recuperación de nutrientes, la calidad del efluente generado y la baja cantidad de fangos producidos, siendo todos ellos de vital importancia cuando se evalúa el impacto medioambiental de una planta de tratamiento de aguas residuales urbanas. El objetivo principal de esta tesis doctoral es evaluar la sostenibilidad económica y medioambiental de la tecnología AnMBR para el tratamiento de aguas residuales urbanas a temperatura ambiente. Concretamente, esta tesis se centra en las siguientes tareas: (1) desarrollo de un modelo de energía detallado y completo que permita evaluar la demanda energética global de diferentes sistemas de tratamiento de aguas residuales tanto en régimen estacionario como en transitorio; (2) propuesta de una metodología de diseño e identificación de configuraciones óptimas para la implementación de la tecnología AnMBR, aplicando para ello un análisis del coste de ciclo de vida (CCV); (3) análisis del ciclo de vida (ACV) de la tecnología AnMBR a diferentes temperaturas; y (4) evaluación global de la sostenibilidad (económica y medioambiental) de la tecnología AnMBR para el tratamiento de aguas residuales urbanas. En este trabajo de investigación se propone un modelo de energía acoplado a la versión extendida del modelo matemático BNRM2. El modelo de energía propuesto se usó para evaluar la eficiencia energía de diferentes procesos de tratamiento de aguas residuales urbanas. Con el fin de proponer unas directrices para el diseño de AnMBR a escala industrial e identificar las configuraciones óptimas para la implementación de dicha tecnología, se aplicaron tanto el modelo de energía propuesto como un análisis CCV. El ACV se usó para evaluar la viabilidad medioambiental de la tecnología AnMBR a diferentes temperaturas. En este trabajo se llevó a cabo una evaluación global de la sostenibilidad (económica y medioambiental) de la tecnología AnMBR para: (a) evaluar las implicaciones que conllevan ciertas decisiones durante el diseño y operación de dicha tecnología mediante un análisis de sensibilidad e incertidumbre, y examinar las contrapartidas en función de criterios económicos y medioambientales; y (b) comparar la tecnología AnMBR con tecnologías basadas en procesos aerobios para el tratamiento de aguas residuales urbanas. Esta tesis doctoral está integrada en un proyecto nacional de investigación, subvencionado por el Ministerio de Ciencia e Innovación (MICINN), con título "Modelación de la aplicación de la tecnología de membranas para la valorización energética de la materia orgánica del agua residual y la minimización de los fangos producidos" (MICINN, proyecto CTM2008-06809-C02-01/02). Para obtener resultados representativos que puedan ser extrapolados a plantas reales, esta tesis doctoral se ha llevado a cabo utilizando un sistema AnMBR que incorpora módulos comerciales de membrana de fibra hueca. Además, esta planta es alimentada con el efluente del pre-tratamiento de la EDAR del Barranco del Carraixet (Valencia, España).
[CAT] El reactor anaerobi de membranes submergides (AnMBR) pot proporcionar el pas desitjat cap a un tractament d'aigües residuals sostenible, i suposa una extensió en l'aplicabilitat de la biotecnologia anaeròbia al tractament d'aigües residuals amb baixa càrrega (p.e. aigua residual urbana) o a condicions mediambientals extremes (p.e. baixes temperatures d'operació). Aquesta tecnologia alternativa reuneix els avantatges dels processos de tractament anaerobi (baixa demanda d'energia per l'estalvi de l'aireig i possibilitat de recuperació energètica per la producció de metà), conjuntament amb els beneficis de l'ús de de la tecnologia de membranes (p.e efluent d'alta qualitat, i reduïdes necessitats d'espai). Cal destacar que la tecnologia AnMBR permet la possibilitat de l'autoabastiment energètic del sistema degut a la generació de biogàs. Altres aspectes que s'han de considerar en el sistema AnMBR són el potencial de recuperació de nutrients, la qualitat de l'efluent i la baixa quantitat de fang generat, tots ells de vital importància quan s'avalua l'impacte mediambiental d'una planta de tractament d'aigües residuals urbanes. L'objectiu principal d'aquesta tesi doctoral és avaluar la sostenibilitat econòmica i mediambiental de la tecnologia AnMBR per al tractament d'aigües residuals urbanes a temperatura ambient. Concretament, aquesta tesi se centra en les tasques següents: (1) desenrotllament d'un detallat i complet model d'energia per al conjunt de la planta a fi d'avaluar la demanda d'energia de diferents sistemes de tractament d'aigües residuals tant en règim estacionari com en transitori; (2) proposta d'una metodologia de disseny i identificació de les configuracions òptimes de la tecnologia AnMBR mitjançant l'aplicació una anàlisi del cost de tot el cicle de vida (CCV) ; (3) anàlisi del cicle de vida (ACV) de la tecnologia AnMBR a diferents temperatures; i (4) avaluació global de la sostenibilitat (econòmica i mediambiental) de la tecnologia AnMBR per al tractament d'aigües residuals urbanes. En aquest treball d'investigació es proposa un model d'energia a nivell de tota la planta acoblat a la versió estesa del model matemàtic BNRM2. El model d'energia proposat s'ha utilitzat per a avaluar l'eficiència energètica de diferents processos de tractament d'aigües residuals urbanes. A fi de proposar unes directrius per al disseny d'AnMBR a escala industrial i identificar les configuracions òptimes de la tecnologia AnMBR, s'ha aplicat tant el model d'energia proposat, com el cost del cicle de vida (CCV). L'anàlisi del cicle de vida (ACV) s'ha utilitzat per a avaluar el rendiment mediambiental de la tecnologia AnMBR a diferents temperatures. En aquest treball s'ha dut a terme una avaluació global de la sostenibilitat (econòmica i mediambiental) de la tecnologia AnMBR per a: (a) avaluar les implicacions de les decisions de disseny i operació per mitjà d'una anàlisi de sensibilitat i incertesa i examinar les contrapartides en funció de criteris econòmics i mediambientals; i (b) comparar la tecnologia AnMBR amb tecnologies basades en processos aerobis per al tractament d'aigües residuals urbanes. Aquesta tesi doctoral està integrada en un projecte nacional d'investigació, subvencionat pel Ministerio de Ciencia e Innovación (MICINN), amb títol "Modelación de la aplicación de la tecnología de membranas para la valorización energética de la materia orgánica del agua residual y la minimización de los fangos producidos" (MICINN, projecte CTM2008-06809-C02-01/02). Per a obtenir resultats representatius que puguen ser extrapolats a plantes reals, aquesta tesi doctoral s'ha dut a terme utilitzant un sistema AnMBR que incorpora mòduls comercials de membrana de fibra buida. A més, aquesta planta és alimentada amb l'efluent del pretractament de l'EDAR del Barranc del Carraixet (València, Espanya).
Pretel Jolis, R. (2015). Environmental and economic sustainability of submerged anaerobic membrane bioreactors treating urban wastewater [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/58864
TESIS
Premiado
Ronne, Luke John Thomas. "Design considerations and analysis of a bioreactor for application in a bio-artificial liver support system." Pretoria : [s.n.], 2006. http://upetd.up.ac.za/thesis/available/etd-04242008-093504/.
Повний текст джерелаBrück, Hannah Luise. "Strain engineering and process design for continuous surfactin production in biofilm bioreactors with Bacillus subtilis 168." Thesis, Lille 1, 2020. http://www.theses.fr/2020LIL1R021.
Повний текст джерелаBiofilm bioreactors show promise for continuous microbial biosurfactant production due to the natural robustness of self-immobilized cells and the possible design of processes avoiding foam formation. The widely used bacterial strain B. subtilis 168 has the potential to produce surfactin, a powerful biosurfactant with exceptional biological activities and various industrial applications. However, B. subtilis 168 exhibits only poor biofilm formation capacities and thus entails limited cell adhesion capacities. In order to improve the natural cell immobilization of B. subtilis 168 to adapt this strain better to biofilm cultivation, filamentous mutant strains with restored exopolysaccharide (EPS) production were generated. The impacts of the genetic modifications were evaluated through colonization assays and by measuring the biofilm formation capacity under low shear stress in a drip-flow reactor (DFR). Subsequently, the most performant strains were selected and cultivated in a newly designed continuous trickle-bed biofilm bioreactor containing highly structured metal packing elements for biofilm formation. Moreover, a bacterial growth model was built able to describe the growth dynamics of the planktonic cell and biofilm population in the system. The colony development was strongly affected by filamentous cell growth and EPS production which was manifested through an enhanced surface spreading and colonization capacity. In the DFR and trickle-bed biofilm bioreactor, the EPS+ mutants showed significantly increased performances regarding the biofilm formation and surfactin production capacities. Whereas cell filamentation had a minor impact on the processes, but contributed to a better cell cohesion in the biofilm and led to reduced cell detachment during the cultivation. Thus, EPS production and filamentous cell growth contributed considerably to an improved process performance in the system. In addition, continuous fermentation has shown to be favorable for a high surfactin productivity. The experimental data from the trickle-bed biofilm bioreactor were in good accordance with those obtained by simulations with the developed growth model. Hence, the growth model has been successfully validated and could be used for further process optimization
Paopo, Idtisak. "Stem cell bioprocessing : bioreactor design and characterisation by computational fluid dynamics and the differentiation of murine embryonic stem cells into the alveolar progenitor cells in sparged bioreactors." Thesis, Imperial College London, 2013. http://hdl.handle.net/10044/1/30783.
Повний текст джерелаGelbgras, Valérie. "Developpement d'un modèle à compartiments d'un bioréacteur lit-fixe utilisé en culture de cellules animales, en vue d'en étudier le design et la montée en échelle." Doctoral thesis, Universite Libre de Bruxelles, 2011. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/209813.
Повний текст джерелаLe lit-fixe du bioréacteur iCELLis est composé d’un empilement de porteurs maintenu entre deux grilles perforées. Ces porteurs sont utilisés comme support par les cellules au cours de la culture. Le bioréacteur est équipé d’un système de transfert gaz-liquide par film tombant afin d’oxygéner le milieu de culture en continu. Une pompe centrifuge plongée dans un bac d’immersion assure la circulation du milieu de culture à travers l’ensemble du bioréacteur. Les cultures se déroulent en trois phases :une phase d’adhérence des cellules aux porteurs du lit-fixe, une phase de croissance cellulaire et une phase de production.
Les avantages d’un bioréacteur lit-fixe sont nombreux :une concentration cellulaire élevée impliquant une productivité élevée, un petit volume de bioréacteur, une faible exposition des cellules aux contraintes de cisaillement, Les bioréacteurs lits-fixes présentent cependant certains inconvénients qui freinent leur développement à l’échelle industrielle. Le lit-fixe se présente comme un réacteur piston ce qui implique l’apparition de gradients de concentrations de cellule et d’espèces extracellulaires (nutriments et produits) le long du lit-fixe. L’intérieur du lit-fixe est également difficilement accessible au cours de la culture. Le suivi des concentrations de cellules et d’espèces dans cette zone est donc problématique.
Une modélisation globale du bioréacteur lit-fixe nous permet de mieux comprendre les différents phénomènes qui prennent place dans le bioréacteur. Grâce à cette modélisation, nous sommes donc capables d’identifier les phénomènes clés contrôlant le procédé et ainsi fournir des pistes de travail pour l’optimisation et la montée en échelle du bioréacteur, ceci sur base de critères rationnels.
Nous choisissons de développer un modèle à compartiments du bioréacteur lit-fixe. Dans ce type de modèle, le bioréacteur est représenté par un réseau de compartiments interconnectés. Nous définissons trois compartiments :un premier pour la pompe, un deuxième pour les cellules et le lit-fixe, et un troisième pour le système de transfert gaz-liquide.
Pour le premier compartiment, nous souhaitons caractériser divers paramètres identifiés comme pertinents pour une sélection adéquate de la pompe. Dans cette thèse, nous présentons une méthode pour caractériser ces paramètres pour une pompe de référence (celle du bioréacteur iCELLis) et pour une pompe en similitude géométrique à la pompe de référence (dans le but d’étudier la montée en échelle).
La pompe de référence est étudiée numériquement (grâce aux logiciels Gambit 2.4 et Fluent 6.3) et expérimentalement. Nous mettons en évidence les liens entre les paramètres de la pompe déterminés numériquement et ceux déterminés expérimentalement. Ces liens définissent notre modèle. En intégrant au modèle les résultats de la simulation numérique de l’écoulement du milieu de culture dans le bac d’immersion contenant la pompe en similitude géométrique à la pompe de référence, nous déterminons entièrement les paramètres recherchés de la seconde pompe sans avoir recours à un prototype. Ceci permet donc de tester différentes échelles avant de choisir la version finale de la seconde pompe.
Le deuxième compartiment du modèle caractérise les cellules et le lit-fixe. La sélection de certains paramètres opératoires dépend du métabolisme cellulaire. Nous souhaitons développer un outil de surveillance en ligne de l’évolution des concentrations de certaines espèces extracellulaires sur base de la connaissance de la concentration cellulaire dans le bioréacteur. Cet outil est développé sur base d’un modèle structuré du métabolisme des cellules animales. Dans un tel modèle, nous établissons des bilans de matière sur les espèces extra- et intracellulaires en considérant les voies métaboliques intracellulaires. Un paramètre requis pour l’emploi de cet outil est la connaissance de la concentration cellulaire au cours de la culture. Or, la surveillance de cette concentration est l’un d’un problème évoqué dans les bioréacteurs lits-fixes. Nous développons donc un modèle ségrégé de culture cellulaire en bioréacteur lit-fixe. Dans ce modèle, nous considérons l’entièreté du lit-fixe. Le modèle comprend différentes populations de cellules :les cellules en suspension dans le milieu au début de la culture et les cellules adhérentes au lit-fixe. Le modèle inclut une distribution spatiale de la concentration d’espèces extracellulaires dans le lit-fixe. Par conséquent, le modèle rapporte les gradients potentiels de concentration de cellules et d’espèces extracellulaires dans le lit-fixe.
Le troisième compartiment du modèle du bioréacteur caractérise le système de transfert gaz-liquide. L’oxygénation est très souvent un paramètre clé dans la conception d’un bioréacteur. Dans le bioréacteur iCELLis, le système de transfert gaz-liquide est un film liquide tombant turbulent. Dans cette thèse, nous proposons une méthode pour caractériser le transfert d’oxygène à travers ce type de film tombant. Notre méthode, basée sur une approche numérique (grâce à Gambit 2.4 et Fluent 6.3), est scindée en deux parties. Premièrement, nous calculons la forme de l’interface gaz-liquide. Une simulation de l'écoulement est réalisée avec le modèle Volume of Fluid (VOF). A partir de cette simulation, la forme de l'interface est traquée. Deuxièmement, la forme de l'interface est générée dans un nouveau domaine de calcul afin de simuler le transfert d’oxygène. Grâce à cette seconde simulation, le coefficient de transfert d’oxygène de la phase gazeuse vers le milieu de culture est déterminé. Grâce à notre méthode, nous caractérisons ce coefficient pour différentes conditions opératoires. Nous étudions notamment l’influence du débit et de la température du milieu de culture sur le coefficient de transfert d’oxygène.
Doctorat en Sciences de l'ingénieur
info:eu-repo/semantics/nonPublished
Halvarsson, Björn. "Interaction Analysis in Multivariable Control Systems : Applications to Bioreactors for Nitrogen Removal." Doctoral thesis, Uppsala universitet, Avdelningen för systemteknik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-122294.
Повний текст джерелаOrtiz, Ruiz Antonio. "Microalgae-based wastewater treatment systems at demonstrative scale : gravity harvesting and thickening of biomass, and advanced design of bioreactors." Doctoral thesis, Universitat Politècnica de Catalunya, 2021. http://hdl.handle.net/10803/673377.
Повний текст джерелаEl cultiu de microalgues està rebent actualment una atenció considerable pel seu potencial en el tractament d'aigües residuals i la producció de biomassa d'algues de la qual es poden obtenir bioproductes d'alt valor i bioenergia, així com el segrest consegüent de diòxid de carboni mitjançant el procés de fotosíntesi. Tot i això, la recol·lecció de biomassa és un dels colls d'ampolla del cultiu de microalgues i dels sistemes de tractament d'aigües residuals basats en elles. La separació de la fase sòlida-líquida requereix tecnologies d'alt consum energètic a causa de la baixa densitat de les microalgues. Els processos de baix cost, com la sedimentació, no són prou eficaços a causa de la baixa velocitat de sedimentació de les microalgues. La sedimentació combinada amb la coagulació i la floculació s'ha estudiat àmpliament a escala de laboratori per augmentar la velocitat de sedimentació de la biomassa algal. Tot i això, pocs estudis han abordat l'augment d'escala d'aquests resultats experimentals per industrialitzar el procés. La tesi ha estat dividida en dues parts. La primera està formada per dos estudis i és el tema principal d'aquesta tesi. Un primer estudi va abordar els principis físics i teòrics de la sedimentació que s'utilitzen pel funcionament i optimització de la recol·lecció de biomassa d'un cultiu de microalgues pel tractament d'aigües residuals a escala demostrativa en el marc del projecte de recerca INCOVER "Innovative Eco-technologies for Resource Recovery from Wastewater" (GA 689242) (https://incover-project.eu/), l'objectiu del qual era validar tecnologies innovadores a escala demostrativa per convertir les aigües residuals en una font d’energia alternativa i en productes de valor afegit. Un segon estudi es va centrar en el funcionament i optimització del procés d'espessiment posterior de la biomassa prèviament collida a les mateixes instal·lacions mitjançant dos espessidors treballant en línia. Finalment, la segona part va consistir en l'estudi i l'optimització del comportament del licor barrejat en el trànsit per un estany d'algues d'alta taxa pel tractament d'aigües residuals mitjançant la modelització de la Dinàmica de Fluids Computacional per a la seva implantació a la ciutat d’Aligarh. Aquest estudi s'ha realitzat en el marc del projecte H2020 PAVITR (http://www.pavitr.net; GA 821410), l'objectiu del qual és la validació de tecnologies naturals i avançades sostenibles pel tractament de l'aigua i de les aigües residuals, control i la reutilització segura de l’aigua a l’Índia. Al primer estudi de la primera part, es van abordar els principis físics i teòrics de la sedimentació per utilitzar-los en el funcionament i l'optimització de la collita de biomassa en sedimentador de làmines (700 L) d'un cultiu de microalgues pel tractament d'aigües residuals en un fotobioreactor tubular semitancat de tres (11,7 m3 cadascun) a escala demostrativa. Durant 6 mesos es va ajustar el flux d'entrada (6900 m3-dia-1), la dosi de coagulant (1-12 mg·L-1) i les purgues de la biomassa (60-240 L·dia-1) per aconseguir una adequada separació de la fase sòlid-líquida. Els resultats d'aquest apartat van evidenciar l'eficàcia de les lamel·les en la tasca de separació sòlid-líquid obtenint una terbolesa de sortida inferior a 5 NTU després del període d'optimització. En el segon estudi, es van operar i optimitzar dos espessidors per aconseguir una concentració adequada (20 g·L-1) de la biomassa recol·lectada prèviament pel posterior procés de digestió anaeròbia a les mateixes instal·lacions. Els espessidors i les purgues es van optimitzar en quatre períodes durant dos mesos. Els resultats van mostrar una concentració final de 26,5 g·L-1 a l'últim període a causa d'un ús minimitzat dels rascadors per evitar la resuspensió de les partícules permetent una adequada sedimentació per compressió. A la segona part, es va dissenyar una Llacuna d'Alta Càrrega a escala demostrativa per ser implementada a Aligarh (Índia) amb una capacitat de tractament de 50 m3・dia-1. L'objectiu de l'estudi era assistir, verificar i optimitzar el dimensionament convencional de les llacunes d'alta càrrega mitjançant la modelització biocinètica i l'anàlisi hidrodinàmica mitjançant dinàmica de fluids computacional (CFD). Segons les simulacions del model biocinètic, el temps de retenció hidràulica òptim per millorar l'eliminació de nutrients va ser de 4 dies. Es va construir un model 3D de la llacuna per analitzar el comportament hidrodinàmic de 36 dissenys en forma de carrusel amb diferents configuracions. Es van simular les diferents combinacions de nombres de deflectors en les inversions, amples de paret central i mides de forma de llàgrima als extrems del mur central. Es va quantificar la presència de zones de baixa velocitat, així com l'àrea útil davant de l'àrea total ocupada. La configuració més eficient va ser la composta per dos deflectors i formes de llàgrima amb un diàmetre igual a . de l'amplada del canal. A més, una avaluació tecno-econòmica del sistema va determinar un cost d'inversió de 732 euros per població equivalent (PE) i un cost operatiu de 0,19 euros per m3 d'aigua residual tractada.
El cultivo de microalgas está recibiendo actualmente una atención considerable por su potencial en el tratamiento de aguas residuales y la producción de biomasa de algas de la que se pueden obtener bioproductos de alto valor y bioenergía, así como el consiguiente secuestro de dióxido de carbono mediante el proceso de fotosíntesis. Sin embargo, la recolección de biomasa es uno de los cuellos de botella del cultivo de microalgas y de los sistemas de tratamiento de aguas residuales basados en ellas. La separación de la fase sólida-líquida requiere tecnologías de alto consumo energético debido a la baja densidad de las microalgas. Los procesos de bajo coste, como la sedimentación, no son lo suficientemente eficaces debido a la baja velocidad de sedimentación de las microalgas. La sedimentación combinada con la coagulación y la floculación se ha estudiado ampliamente a escala de laboratorio para aumentar la velocidad de sedimentación de la biomasa algal. Sin embargo, pocos estudios han abordado el aumento de escala de estos resultados experimentales con el fin de industrializar el proceso. La tesis se ha dividido en dos partes principales. La primera está conforma por dos estudios y es el tema principal de esta tesis. Un primer estudio abordó los principios físicos y teóricos de la sedimentación que se utilizan para el funcionamiento y la optimización de la recolección de biomasa de un cultivo de microalgas para el tratamiento de aguas residuales a escala demostrativa en el marco del proyecto de investigación INCOVER "Innovative Eco-technologies for Resource Recovery from Wastewater" (GA 689242) (https://incover-project.eu/), cuyo objetivo era validar tecnologías innovadoras a escala demostrativa para convertir las aguas residuales en una fuente de energía alternativa y en productos de valor añadido. Un segundo estudio se centró en el funcionamiento y optimización del proceso de espesamiento posterior de la biomasa previamente cosechada en las mismas instalaciones mediante dos espesadores trabajando en línea. Por último, la segunda parte consistió en el estudio y optimización del comportamiento del licor mezclado en su tránsito por un estanque de algas de alta tasa para el tratamiento de aguas residuales mediante la modelización de la Dinámica de Fluidos Computacional para su implantación en la ciudad de Aligarh. Este estudio se ha realizado en el marco del proyecto H2020 PAVITR (http://www.pavitr.net; GA 821410), cuyo objetivo es la validación de tecnologías naturales y avanzadas sostenibles para el tratamiento del agua y de las aguas residuales, el control y la reutilización segura del agua en la India. En el primer estudio de la primera parte, se abordaron los principios físicos y teóricos de la sedimentación para utilizarlos en el funcionamiento y la optimización de la cosecha de biomasa en sedimentador de láminas (700 L) de un cultivo de microalgas para el tratamiento de aguas residuales en un fotobiorreactor tubular semicerrado de tres (11,7 m3 cada uno) a escala demostrativa. Durante 6 meses se ajustó el flujo de entrada (6900 m3·día-1), la dosis de coagulante (1-12 mg·L-1) y las purgas de la biomasa (60-240 L·día-1) para conseguir una adecuada separación de la fase sólido-líquida. Los resultados de este apartado evidenciaron la eficacia de las lamelas en la tarea de separación sólidolíquido obteniendo una turbidez de salida inferior a 5 NTU tras el periodo de optimización. En el segundo estudio, se operaron y optimizaron dos espesadores para conseguir una concentración adecuada (20 g·L-1) de la biomasa recolectada previamente para el posterior proceso de digestión anaerobia en las mismas instalaciones. Los espesadores y las purgas se optimizaron en cuatro periodos durante dos meses. Los resultados mostraron una concentración final de 26,5 g·L-1 en el último periodo debido a un uso minimizado de los rascadores para evitar la resuspensión de las partículas permitiendo una adecuada sedimentación por compresión. En la segunda parte, se diseñó una Laguna de Alta Carga a escala demostrativa para ser implementada en Aligarh (India) con una capacidad de tratamiento de 50 m3·día-1. El objetivo del estudio era asistir, verificar y optimizar el dimensionamiento convencional de las Lagunas de Alta Carga mediante la modelización biocinética y el análisis hidrodinámico mediante Dinámica de Fluidos Computacional (CFD). Según las simulaciones del modelo biocinético, el tiempo de retención hidráulica óptimo para mejorar la eliminación de nutrientes fue de 4 días. Se construyó un modelo 3D de la laguna para analizar el comportamiento hidrodinámico de 36 diseños en forma de carrusel con diferentes configuraciones. Se simularon las diferentes combinaciones de números de deflectores en las inversiones, anchos de pared central y tamaños de forma de lágrima en os extremos del muro central. Se cuantificó la presencia de zonas de baja velocidad, así como el área útil frente al área total ocupada. La configuración más eficiente resultó ser la compuesta por dos deflectores y formas de lágrima con un diámetro igual a ¼ de la anchura del canal. Además, una evaluación técnico-económica del sistema determinó un coste de inversión de 732 euros por población equivalente (PE) y un coste operativo de 0,19 euros por m3 de agua residual tratada.
Enginyeria ambiental
Fillis, Vernon William. "Design of a packed-bed fungal bioreactor : the application of enzymes in the bioremediation of organo-pollutants present in soils and industrial effluent." Thesis, Peninsula Technikon, 2001. http://hdl.handle.net/20.500.11838/910.
Повний текст джерелаCertain fungi have been shown to excrete extracellular enzymes, including peroxidases, laccases, etc. These enzymes are useful for bioremediation of aromatic pollutants present in industrial effluents (Leukes, 1999; Navotny et aI, 1999). Leukes (1999) made recent significant development in the form of a capillary membrane gradostat (fungal) bioreactor that offers optimal conditions for the production of these enzymes in high concentrations. This system also offers the possibility for the polluted effluent to be treated directly in the bioreactor. Some operating problems relating to continuous production of the enzymes and scale-up of the capillary modules, were, however, indentified. In an attempt to solve the above-mentioned identified problems the research group at Peninsula Technikon considered a number of alternative bioreactor configurations. A pulsed packed bed bioreactor concept suggested by Moreira et at. (1997) was selected for further study. Their reactor used polyurethane pellets as the support medium for the fungal biofilm and relied upon pulsing of the oxygen supply and recycle of nutrient solution in order to control biomass accumulation. These authors reported accumulation due to the recycle of proteases that were believed to destroy the desired ligninases. We experimented with a similar concept without recycle to avoid backrnixing and thereby overcome protease accumulation. In our work, a maximum enzyme productivity of 456 Units.L1day·1 was attained. Since this was significantly greater than the maximum reported by Moreira et aI, 1997 (202 Units.L-1day-I) it appeared that the elimination of recycle had significant benefits. In addition to eliminating recycle we also used a length / diameter (L / D) ratio of 14: 1 (compared with 2.5: 1 used by Moreira et aI, 1997) in order to further reduce backrnixing. Residence time distributions were investigated to gain insight into mechanisms of dispersion in the reactor. It was found that the pulsed packed bed concept presented problems with regard to blockage by excess biomass. This led us to consider the advantages of a fluidized bed using resin beads. Accordingly, growth of fungi on resin beads in shake flasks was investigated with favorable results. An experimental program is proposed to further investigate the fluidized bed concept with a view to extending the operation time of the bioreactor. From our literature survey to date, packed bed fungal bioreactors are still the best reactor configuration for continuous production ofligninolytic enzymes. An interesting study of the application of laccases to the degradation of naphthalene and MTBE is described in an addendum to this thesis.
Sucosky, Philippe. "Flow Characterization and Modeling of Cartilage Development in a Spinner-Flask Bioreactor." Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/6875.
Повний текст джерелаPolesel, Fabio. "Design, realization and characterization of automated millifluidic bioreactors for investigating the molecular evolution of lytic or lysogenic vector phages infecting engineered host e. Coli." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2015. http://amslaurea.unibo.it/8770/.
Повний текст джерелаMyers, Michael John. "Laboratory Scale Solid State Landfill Bioreactor Design." The Ohio State University, 1999. http://rave.ohiolink.edu/etdc/view?acc_num=osu1393077896.
Повний текст джерелаGoh, Shireen. "Micro-bioreactor design for Chinese hamster ovary cells." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/82368.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 195-203).
The research objective is to design a micro-bioreactor for the culture of Chinese Hamster Ovary (CHO) cells. There is an increasing demand for upstream development in high-throughput micro-bioreactors specifically for the recombinant CHO cell line, an important cell line for producing recombinant protein therapeutics. In order to translate a micro-bioreactor originally designed by our group for bacteria to CHO cells, there would need to be significant modifications in the design of the micro-bioreactor due to the extreme sensitivity of CHO cells to physical and chemical stresses. Shear stresses inside the growth chamber will have to be reduced by three orders of magnitude. Moreover, the long doubling time of CHO cells requires a 2 weeks long culture. In a high surface to volume ratio micro-bioreactor, evaporation becomes a major problem. Contamination control is also vital for CHO cultures. In addition, the offline sampling volume required for validation necessitates a doubling of the working volume to 2mL. The newly designed Resistive Evaporation Compensated Actuated (RECA) micro-bioreactor is fully characterized in this thesis to ensure that the design meets the physical specifications of the required CHO cell culture conditions. The RECA micro-bioreactor will be tested with industrial recombinant CHO cell lines. This work is done in collaboration with Genzyme, USA and Sanofi-Aventis, Frankfurt. In this thesis, we also propose the use of dielectric spectroscopy electrodes for online cell viability sensing of CHO cells in micro-bioreactors. The electrodes are fabricated on polycarbonate, a biocompatible and optically clear thermoplastic that will be one of the future base material for microfluidic devices which can be rapidly prototyped. To demonstrate the viability of dielectric spectroscopy as an online viability sensor for CHO cells in a micro-bioreactor, the electrodes are used to characterize samples taken daily from a CHO shake flask batch culture without any sample modifications. Two different electrode geometries and correction methods will be compared to find the optimal system for viability measurements in a micro-bioreactor.
by Shireen Goh.
Ph.D.
Kaul, Himanshu. "A multi-paradigm modelling framework for simulating biocomplexity." Thesis, University of Oxford, 2013. https://ora.ox.ac.uk/objects/uuid:a3e6913d-b4c1-49fd-88fb-7e7155de2e2f.
Повний текст джерелаKim, Ernest S. (Ernest Soonho) 1974. "Design of a single capillary-parenchymal co-culture bioreactor." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/89889.
Повний текст джерелаMascarenhas, Craig Anthony. "Design and development of components of a modular bioreactor." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/112524.
Повний текст джерелаPage 206 blank. Cataloged from PDF version of thesis.
Includes bibliographical references (pages 196-205).
Biologic drug manufacturing is traditionally conducted in large-scale, industrial bioreactors. The emergence of interest in disposable, bench-top bioreactors as a viable alternative is due to potential advantages such as lower contamination risk, time and cost savings, and ease of handling. The challenges associated with disposable, bench-top bioreactors include poor mixing, limited oxygen transfer, and a scarcity of non-invasive sensors for process control. This thesis investigates multiple aspects of a disposable, perfusion-capable bioreactor, in order to facilitate an optimal design. In order to determine an impeller configuration that improves the mixing and mass transfer characteristics of a i-liter bioreactor, Computational Fluid Dynamics (CFD) was used. The potential benefits of switching to a dual-Marine impeller system was revealed, which was then validated during fermentation experiments. Further predictions of a merging flow pattern in the i-liter vessel was consistent with the literature based on the impeller spacing. A scaled-up 5-liter vessel was designed with Rushton impellers spaced so as to create a parallel flow pattern, which was later successfully predicted in the CFD simulations. Flow patterns were analyzed at various locations in both vessels to aid future design iterations. Monitoring of process parameters, including liquid level, is important for automated control in bioreactors. Three novel, non-invasive, optical liquid level sensing methods were conceptualized, prototyped, and successfully tested. These solutions relied on self-developed image processing algorithms. Additionally, a magnetic liquid level sensor was also developed and tested that relied on a magnetic float and a series of reed switches. In order to increase the perfusion membrane surface area and reduce complexity, the switch to a hollow-fiber harvest probe was examined. CFD studies guided design iterations by modeling the flow around the probe, giving insight into the stagnation properties and shear forces acting on the fibers. Additionally, experimental testing of the new harvest probe revealed its successful functionality and viability in the bioreactor.
by Craig Anthony Mascarenhas.
S.M.
Gerontas, Spyridon. "Bioreactor design for the controlled formation of engineered tissues." Thesis, University College London (University of London), 2007. http://discovery.ucl.ac.uk/1445509/.
Повний текст джерелаEnrico, Merzari. "Bioreactor Design for Dynamic Process Optimization in Tissue Engineering." Doctoral thesis, Università degli studi di Trento, 2011. https://hdl.handle.net/11572/368295.
Повний текст джерелаLi, Winton. "Design of bioreactor for reducing sulphate in cattle drinking water." Thesis, University of British Columbia, 2009. http://hdl.handle.net/2429/17422.
Повний текст джерелаBeatty, Amanda Marie. "Design and Validation of a Complex Loading Whole Spinal Segment Bioreactor." BYU ScholarsArchive, 2015. https://scholarsarchive.byu.edu/etd/5618.
Повний текст джерелаOkarski, Kevin Mark Mr. "IMPLEMENTATION OF PHYSIOLOGIC PRESSURE CONDITIONS IN A BLOOD VESSEL MIMIC BIOREACTOR SYSTEM." DigitalCommons@CalPoly, 2010. https://digitalcommons.calpoly.edu/theses/356.
Повний текст джерелаHubbard, Brian. "Design and operation of novel up-flow bioreactor for microbial perchlorate removal." Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 72 p, 2009. http://proquest.umi.com/pqdweb?did=1674961741&sid=2&Fmt=2&clientId=8331&RQT=309&VName=PQD.
Повний текст джерелаCavers, Andrew. "Mechanical strain bioreactor design and assessment for culture of human airway smooth muscle." Thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/59236.
Повний текст джерелаApplied Science, Faculty of
Graduate
Tsang, Man Leung. "Design of a continuous flow aerobic bioreactor for odour removal from livestock slurry." Thesis, University of Glasgow, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.398677.
Повний текст джерелаAl-Ramadhani, O. "Design and characterisation of a parallel miniaturised bioreactor system for mammalian cell culture." Thesis, University College London (University of London), 2015. http://discovery.ucl.ac.uk/1460929/.
Повний текст джерелаAbdul, Manan Musaalbakri. "Design aspects of solid state fermentation." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/design-aspects-of-solid-state-fermentation(d64ea506-85ee-424f-9bca-531488e3e3c7).html.
Повний текст джерелаBurns, John W. "Design, construction, modelling and control of a dual-hollow fibre bioreactor for hybridoma cells." Thesis, University of Edinburgh, 1991. http://hdl.handle.net/1842/13277.
Повний текст джерелаMcNicoll, Dan. "Enhanced bioremediation of petroleum contaminated soils using an engineered bioreactor design CFB Petawawa, Petawawa, Ontario." Thesis, University of Ottawa (Canada), 1994. http://hdl.handle.net/10393/9953.
Повний текст джерелаGama, Repson. "A lignocellulolytic enzyme system for fruit waste degradation : commercial enzyme mixture synergy and bioreactor design." Thesis, Rhodes University, 2014. http://hdl.handle.net/10962/d1013073.
Повний текст джерелаPoon, Christine Tin Wai. "Design and Development of a Novel Bioreactor System for In-Vitro Modelling of Respiratory Tissues." Thesis, The University of Sydney, 2015. http://hdl.handle.net/2123/14566.
Повний текст джерелаLeung, Leo. "An economical, adaptable and user-friendly drip-perfusion bioreactor system designed for in vitro three dimensional cell culturing." Thesis, Queensland University of Technology, 2016. https://eprints.qut.edu.au/92639/1/Leo_Leung_Thesis.pdf.
Повний текст джерелаKraft, Deborah Joy. "Nutrient Removal Performance Of A Wood Chip Bioreactor Treatment System Receiving Silage Bunker Runoff." ScholarWorks @ UVM, 2019. https://scholarworks.uvm.edu/graddis/981.
Повний текст джерелаDamen, Bas Stefaan, and bsdamen@hotmail com. "Design, Development, and Optimisation of a Culture Vessel System for Tissue Engineering Applications." Swinburne University of Technology. n/a, 2003. http://adt.lib.swin.edu.au./public/adt-VSWT20040512.125051.
Повний текст джерелаSchipke, Kimberly Jo. "DESIGN OF A CYCLIC PRESSURE BIOREACTOR FOR THE EX VIVO STUDY OF AORTIC HEART VALVE MECHANOBIOLOGY." MSSTATE, 2008. http://sun.library.msstate.edu/ETD-db/theses/available/etd-07112008-155755/.
Повний текст джерелаBOEHME, ANDREA. "Development and manufacture of a miniatured flow through-put (multiple) bioreactor system." Doctoral thesis, Università degli Studi di Roma "Tor Vergata", 2016. http://hdl.handle.net/2108/202269.
Повний текст джерелаTahlawi, Asma Abdulaziz. "Materials design & modification for a three dimensional hollow fibres bioreactor for the production of blood cells." Thesis, Imperial College London, 2017. http://hdl.handle.net/10044/1/61783.
Повний текст джерелаBrijwani, Khushal. "Solid state fermentation of soybean hulls for cellulolytic enzymes production: physicochemical characteristics, and bioreactor design and modeling." Diss., Kansas State University, 2011. http://hdl.handle.net/2097/8401.
Повний текст джерелаDepartment of Grain Science and Industry
Praveen V. Vadlani
The purpose of this study was to investigate micro- and macro-scale aspects of solid state fermentation (SSF) for production of cellulolytic enzymes using fungal cultures. Included in the objectives were investigation of effect of physicochemical characteristics of substrate on enzymes production at micro-scale, and design, fabrication and analysis of solid-state bioreactor at macro-scale. In the initial studies response surface optimization of SSF of soybeans hulls using mixed culture of Trichoderma reesei and Aspergillus oryzae was carried out to standardize the process. Optimum temperature, moisture and pH of 30ºC, 70% and 5 were determined following optimization. Using optimized parameters laboratory scale-up in static tray fermenter was performed that resulted in production of complete and balanced cellulolytic enzyme system. The balanced enzyme system had required 1:1 ratio of filter paper and beta-glucosidase units. This complete and balanced enzyme system was shown to be effective in the hydrolysis of wheat straw to sugars. Mild pretreatments– steam, acid and alkali were performed to vary physicochemical characteristics of soybean hulls – bed porosity, crystallinity and volumetric specific surface. Mild nature of pretreatments minimized the compositional changes of substrate. It was explicitly shown that more porous and crystalline steam pretreated soybean hulls significantly improved cellulolytic enzymes production in T. reesei culture, with no effect on xylanase. In A. oryzae and mixed culture this improvement, though, was not seen. Further studies using standard crystalline substrates and substrates with varying bed porosity confirmed that effect of physicochemical characteristics was selective with respect to fungal species and cellulolytic activity. A novel deep bed bioreactor was designed and fabricated to address scale-up issues. Bioreactor’s unique design of outer wire mesh frame with internal air distribution and a near saturation environment within cabinet resulted in enhanced heat transfer with minimum moisture loss. Enzyme production was faster and leveled within 48 h of operation compared to 96 h required in static tray. A two phase heat and mass transfer model was written that accurately predicted the experimental temperature profile. Simulations also showed that bioreactor operation was more sensitive to changes in cabinet temperature and mass flow rate of distributor air than air temperature.
Fotticchia, Andrea. "Design and development of anisotropic laminate scaffolds of electrospun polycaprolactone for annulus fibrosus tissue engineering applications." Thesis, Loughborough University, 2016. https://dspace.lboro.ac.uk/2134/21407.
Повний текст джерелаLiu, Janet. "Design of a Novel Tissue Culture System to Subject Aortic Tissue to Multidirectional Bicuspid Aortic Valve Wall Shear Stress." Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1527077368757049.
Повний текст джерела