Добірка наукової літератури з теми "Bioabsorbable stent"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Bioabsorbable stent".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Bioabsorbable stent"
Zhao, Yaping, Zhong Chen, Wayne W. Zhang, Sheng Wang, Yaoguo Yang, and Liao Yang. "Bioabsorbable Drug-Eluting Stent Versus Bare Metal Stent in Iliac Artery Evaluated by Optical Coherence Tomography: An In Vivo Study in Porcine." Vascular and Endovascular Surgery 52, no. 7 (July 16, 2018): 512–19. http://dx.doi.org/10.1177/1538574418783528.
Повний текст джерелаAlexy, Ryan D., and Daniel S. Levi. "Materials and Manufacturing Technologies Available for Production of a Pediatric Bioabsorbable Stent." BioMed Research International 2013 (2013): 1–11. http://dx.doi.org/10.1155/2013/137985.
Повний текст джерелаKobo, Ofer, and Ariel Roguin. "Orsiro: ultrathin bioabsorbable polymer sirolimus-eluting stent." Future Cardiology 15, no. 4 (July 2019): 295–300. http://dx.doi.org/10.2217/fca-2019-0001.
Повний текст джерелаJamshidi, Mehdi, Mahmoud Rajabian, Michael B. Avery, Uttandaraman Sundararaj, Janet Ronsky, Brooke Belanger, John H. Wong, and Alim P. Mitha. "A novel self-expanding primarily bioabsorbable braided flow-diverting stent for aneurysms: initial safety results." Journal of NeuroInterventional Surgery 12, no. 7 (November 27, 2019): 700–705. http://dx.doi.org/10.1136/neurintsurg-2019-015555.
Повний текст джерелаLiu, Si W., Ching-Sung Weng, Shih-Ming Wang, Wei-Jie Wang, and Ming-Chen Wang. "A BIOABSORBABLE, DEGRADABLE STENT WITH A DRUG RELEASE SYSTEM." Biomedical Engineering: Applications, Basis and Communications 30, no. 03 (May 30, 2018): 1850021. http://dx.doi.org/10.4015/s1016237218500217.
Повний текст джерелаShah, Jimil, and Surinder Singh Rana. "Newer Stents for Unresectable Malignant Distal Biliary Obstruction: Striving for Perfection!" Journal of Digestive Endoscopy 12, no. 01 (March 2021): 059–62. http://dx.doi.org/10.1055/s-0041-1728841.
Повний текст джерелаFerence, Elisabeth H., Karam W. Badran, Edward C. Kuan, Marvin Bergsneider, Anthony P. Heaney, and Marilene B. Wang. "Bioabsorbable Steroid Eluting Stents in the Treatment of Recurrent Rathke's Cleft Cyst." Journal of Neurological Surgery Part B: Skull Base 80, no. 05 (December 6, 2018): 505–10. http://dx.doi.org/10.1055/s-0038-1675558.
Повний текст джерелаWu, Yizhe, Li Shen, Qibing Wang, Lei Ge, Jian Xie, Xi Hu, Aijun Sun, Juying Qian, and Junbo Ge. "Comparison of Acute Recoil between Bioabsorbable Poly-L-lactic Acid XINSORB Stent and Metallic Stent in Porcine Model." Journal of Biomedicine and Biotechnology 2012 (2012): 1–8. http://dx.doi.org/10.1155/2012/413956.
Повний текст джерелаKhan, Abdur R., Avnish Tripathi, Talha A. Farid, Bilal Abaid, Deepak L. Bhatt, Jon R. Resar, and Michael P. Flaherty. "Stent thrombosis with bioabsorbable polymer drug-eluting stents." Coronary Artery Disease 28, no. 7 (November 2017): 564–69. http://dx.doi.org/10.1097/mca.0000000000000539.
Повний текст джерелаVorobeva, Yu S., Z. K. Shugushev, A. G. Faibushevich, and D. A. Maximkin. "BIOABSORBABLE SCAFFOLDS FOR PERCUTANEOUS CORONARY INTERVENTIONS IN PATIENTS WITH CORONARY ARTERY DISEASE: PROBLEMS AND FUTURE PERSPECTIVES." Complex Issues of Cardiovascular Diseases 8, no. 3 (September 26, 2019): 72–84. http://dx.doi.org/10.17802/2306-1278-2019-8-3-72-84.
Повний текст джерелаДисертації з теми "Bioabsorbable stent"
Guerra, Sánchez Antonio. "Contribution to bioabsorbable stent manufacture with additive manufacturing technologies." Doctoral thesis, Universitat de Girona, 2019. http://hdl.handle.net/10803/667867.
Повний текст джерелаLa principal motivació d'aquest treball va ser analitzar la viabilitat del procés de fabricació de stent actual per produir els nous stents bioabsorbibles (SBA), així com estudiar noves maneres de fabricar-los. El tall làser de fibra (TLF) ha estat seleccionat perquè és el procés de fabricació actual per stents i L´impressió 3D (I3D) perquè té la capacitat de processar diferents tipus de materials per a aplicacions mèdiques i els seus aspectes econòmics. Stents ha estat seleccionat per ser un dels dispositius mèdics més implantats del món. La tesi es centra en la millora dels processos de fabricació de stent, establint relacions entre els paràmetres del procés i els aspectes clau de stent, precisió, propietats mecàniques i propietats mèdiques i reduir els costos derivats d'aquest procés de fabricació
Kapadia, Fehmida. "Development and Commercialization of a Bioabsorbable Stent for the Treatment of Congenital Heart Disease in Pediatric Patients." Case Western Reserve University School of Graduate Studies / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=case1337135424.
Повний текст джерелаCARMAGNOLA, IRENE. "Polylactic acid based materials and nanostructured multilayers for cardiovascular devices and wound healing." Doctoral thesis, Politecnico di Torino, 2013. http://hdl.handle.net/11583/2518962.
Повний текст джерелаVan, Pelt Jacqueline G. Shaw Barbara A. "Magnesium alloys for use in bioabsorbable cardiac stents." [University Park, Pa.] : Pennsylvania State University, 2009. http://honors.libraries.psu.edu/theses/approved/WorldWideIndex/EHT-6/index.html.
Повний текст джерелаLiu, Si-Wen, and 劉喜文. "Development and clinical evaluation for drug delivery carrier system of bioabsorbable composite stent." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/gq2q6q.
Повний текст джерела中原大學
生物醫學工程研究所
106
Angioplasty is considered the most effective treatment for atherosclerosis. The stent currently used in clinical medicine is divided into a typical vascular stents and an drug-coated stents. Use of typical vascular stents has a high probability of restenosis development. Vascular restenosis occurs within a few months after stent implantation, and patients require surgical intervention. In contrast to such stents, drug-coated stents can effectively inhibit the growth of vascular endothelial tissues on stents. Given the physiological mechanism, drug-coating inhibits tissue growth on the stent, induces the local regulation of tissue inflammation, and triggers an immune response. However, the efficacy of such stents is limited because the metabolites in the blood of the human body rapidly metabolize the drug on the stent. In this study, we developed and examined a stent drug-release system that overcomes the problems in current stent technology. In addition, we designed the drug storage stent. The stent can be used to achieve long-term controlled drug release and to treat cardiovascular-related diseases. Rapid production of brackets through mold forming. The study used a "toggle-type micro-tooling machine" for micro-engraving of the mold, and injected polycaprolactone (PCL) into the designed mold to produce a stent having a length of 28 mm and a diameter of 6 mm. Micropores with a diameter of 0.5 mm and a depth of 0.6 mm were created on the stent. The stent has 54 holes, each of which can store 0.12 c3 of drug. In order to determine the optimal PCL concentration material for the stent, three stents with PCL concentrations (20%, 25%, and 30%) composite material were prepared in the experiment. The AFM results showed that the PCL 25% composite material concentration of the stent had the smallest surface roughness (RA = 1.77E + 02nm) and had the lowest effect on the blood vessels. In the sample with the PCL 25% composite material concentration, the stent surface was smooth and without fractures under 25× magnification , while under 500× magnification, an even surface was observed . In addition, With an increase in PCL composite material concentration from the PCL 20% to 30%, the load increased from 39.718 to 63.5 N. Young’s modulus increased from 31.44±4.1MPa to 33.10±2.7 Mpa. In addition, four proportions of PCL:PLGA (10:0, 8:2, 5:5, 0:10) were tested. After degradation experiments, it was found that when the proportion of PCL of the mixture increased, the PBS exudation rate slowed down. Verify that the molecular weight is changed to control the rate of degradation. The corresponding pore degradation time was employed as a reference parameter for controlling the amount of drug release in the stent design. The results indicated that the hemolysis of vascular stent material was 1.2%. The results of this study indicated no hemolysis, which verified that the biodegradable drug-loaded vascular stent was suitable for application in the bloodstream. The result of Platelet experiment which revealed that surface roughness affected the amount of platelet and fibrinogen adhesion. And less roughness on a stent surface reduced platelet adhesion and blood coagulation. The results of drug release rate showed that the release of everolimus increased with time, and the release amount was the highest at 8 hours, and the release rate was 36.95%. The result of coverage experiments have shown that hyaluronic acid coated everolimus is slowly elevated, and everolimus is slowly infiltrated into hyaluronic acid. This result of the swelling rate experiment, it was found that the degree of swelling containing everolimus was 13 times lower than that of the original hyaluronic acid. Therefore, hyaluronic acid encapsulates everolimus, which does would not block blood vessels. After 120 h, the amount of LDH release did not show any evident increase (p < 0.05). The release rate of LDH in this study was 13–18%, which indicated that the cocultivation of vascular stent material and cells did not cause high levels of cell death or damage, biocompatibility was high, and it was suitable for use in blood vessels. The result of animal experiment was carried out by pig (Lanyu 200), aged from 6~7 month, male and weighed about 50 kg. To verify the biocompatibility between the scaffold and the animal, the results showed that it was initially observed in the animal for 3 months. The material was high compatibility in the blood vessels of the pigs, and there was no toxicity, no rejection, no effect Animal life. The "bioabsorbable composite stent " developed in this study is proved to be suitable for application in blood vessels.
Elahi, Sahar. "IVOCT imaging artifacts of coronary stents." Thesis, 2013. http://hdl.handle.net/2152/25911.
Повний текст джерелаtext
Книги з теми "Bioabsorbable stent"
Mitchell, Andrew, Giovanni Luigi De Maria, and Adrian Banning, eds. Cardiac Catheterization and Coronary Intervention. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198705642.001.0001.
Повний текст джерелаЧастини книг з теми "Bioabsorbable stent"
van Ditzhuijzen, Nienke Simone, Antonios Karanasos, Jors Nicolaas van der Sijde, Gijs van Soest, and Evelyn Regar. "Bioabsorbable Stent." In Cardiovascular OCT Imaging, 179–93. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-10801-8_13.
Повний текст джерелаGammon, R. S., G. D. Chapman, R. P. Bauman, and R. S. Stack. "Bioabsorbable Endovascular Stent Prostheses." In Coronary Stents, 155–67. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-76924-5_9.
Повний текст джерелаSchultze, Christine, N. Grabow, H. Martin, and K. P. Schmitz. "Finite-element-analysis and in vitro study of bioabsorbable polymer stent designs." In IFMBE Proceedings, 2175–78. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-89208-3_520.
Повний текст джерелаSchwartz, R. S., J. G. Murphy, W. D. Edwards, and D. R. Holmes. "Bioabsorbable, Drug-Eluting, Intracoronary Stents: Design and Future Applications." In Coronary Stents, 135–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-76924-5_8.
Повний текст джерелаDeng, Charles Z., Rajesh Radhakrishnan, Steve R. Larsen, Dennis A. Boismer, Jon S. Stinson, Adrienne K. Hotchkiss, Eric M. Petersen, Jan Weber, and Torsten Scheuermann. "Magnesium Alloys for Bioabsorbable Stents: A Feasibility Assessment." In Magnesium Technology 2011, 413–18. Cham: Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-319-48223-1_78.
Повний текст джерелаDeng, Charles Z., Rajesh Radhakrishnan, Steve R. Larsen, Dennis A. Boismer, Jon S. Stinson, Adrienne K. Hotchkiss, Eric M. Petersen, Jan Weber, and Torsten Scheuermann. "Magnesium Alloys For Bioabsorbable Stents: A Feasibility Assessment." In Magnesium Technology 2011, 413–18. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118062029.ch78.
Повний текст джерелаJagannath Nithin, Ilangovan, and Narayanasamy Srirangarajalu. "Modelling and Analysis of Auxetic Structure Based Bioabsorbable Stents." In Emerging Trends in Computing and Expert Technology, 540–50. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-32150-5_52.
Повний текст джерелаGomurashvili, Zaza, Huashi Zhang, Jane Da, Turner D. Jenkins, Jonathan Hughes, Mark Wu, Leanne Lambert, et al. "From Drug-Eluting Stents to Biopharmaceuticals: Poly(ester amide) a Versatile New Bioabsorbable Biopolymer." In ACS Symposium Series, 10–26. Washington, DC: American Chemical Society, 2008. http://dx.doi.org/10.1021/bk-2008-0977.ch002.
Повний текст джерелаSantos, F. J., B. A. Hernandez, M. P. D. Souza, A. J. P. Andrade, and E. A. C. Sousa. "Challenges in finite element modelling of bioabsorbable stents for the treatment of Aortic Coarctation." In Advances and Current Trends in Biomechanics, 289–93. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003217152-64.
Повний текст джерелаMukherjee, Debabrata. "Bioabsorbable Stents." In Textbook of Interventional Cardiology, 432–41. Elsevier, 2012. http://dx.doi.org/10.1016/b978-1-4377-2358-8.00033-4.
Повний текст джерелаТези доповідей конференцій з теми "Bioabsorbable stent"
Dong, Pengfei, Longzhen Wang, and Linxia Gu. "Degradation Modeling of Bioabsorbable Polymer Stent." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-88116.
Повний текст джерелаWeber, C., S. Stolle, and T. Lenarz. "Bioabsorbable steroid-eluting stent Propel® – Erste Erfahrungen mit dem neuartigen Nasennebenhöhlen-Stent." In Abstract- und Posterband – 89. Jahresversammlung der Deutschen Gesellschaft für HNO-Heilkunde, Kopf- und Hals-Chirurgie e.V., Bonn – Forschung heute – Zukunft morgen. Georg Thieme Verlag KG, 2018. http://dx.doi.org/10.1055/s-0038-1640939.
Повний текст джерелаWeber, C., S. Stolle, and T. Lenarz. "Bioabsorbable steroid-eluting stent Propel® – First experience with thenovel paranasal sinus stent." In Abstract- und Posterband – 89. Jahresversammlung der Deutschen Gesellschaft für HNO-Heilkunde, Kopf- und Hals-Chirurgie e.V., Bonn – Forschung heute – Zukunft morgen. Georg Thieme Verlag KG, 2018. http://dx.doi.org/10.1055/s-0038-1640940.
Повний текст джерелаSun, Matthew Z., Marvin Bergsneider, and Marilene B. Wang. "Single Institutional Experience with Bioabsorbable Steroid Eluting Stent Treatment of Recurrent Rathke’s Cleft Cyst." In 30th Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2020. http://dx.doi.org/10.1055/s-0040-1702350.
Повний текст джерелаSantos, Flávio, Bruno Agostinho Hernandez, Mateus Piccin Duarte de Souza, Aron Andrade, and EDSON CAPELLO SOUSA. "FINITE ELEMENT SIMULATION AND PERFORMANCE ANALYSIS OF A NOVEL BIOABSORBABLE STENT FOR THE TREATMENT OF AORTIC COARCTATION." In 26th International Congress of Mechanical Engineering. ABCM, 2021. http://dx.doi.org/10.26678/abcm.cobem2021.cob2021-0131.
Повний текст джерелаBergstrom, Jorgen S., David J. Quinn, Samual Chow, and Sekar M. Govindarajan. "Non-Linear Viscoplastic Material Modeling of the Degradation Response of PLA." In ASME 2013 Conference on Frontiers in Medical Devices: Applications of Computer Modeling and Simulation. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/fmd2013-16120.
Повний текст джерелаLi, Fengqin, Yiqing Gu, Yuan Tian, Jie Cheng, and Gutian Zhao. "Preparation and Evaluation of PDLLA/Sirolimus Coatings on Fully Bioabsorbable Drug-Eluting Stents." In the 2018 8th International Conference. New York, New York, USA: ACM Press, 2018. http://dx.doi.org/10.1145/3208955.3208959.
Повний текст джерелаHussein, H., H. Rai, R. Colleran, E. Xhepa, S. Sinieck, S. Cassese, M. Joner, A. Kastrati, RA Byrne, and D. Foley. "37 Optical coherence tomography tissue coverage and characterization by grey-scale signal intensity analysis post bifurcation stenting with new generation bioabsorbable polymer everolimus-eluting stents." In Irish Cardiac Society Annual Scientific Meeting & AGM, Thursday October 5th – Saturday October 7th 2017, Millennium Forum, Derry∼Londonderry, Northern Ireland. BMJ Publishing Group Ltd and British Cardiovascular Society, 2017. http://dx.doi.org/10.1136/heartjnl-2017-ics17.37.
Повний текст джерела