Добірка наукової літератури з теми "Bennet's doubler"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Bennet's doubler".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Bennet's doubler"
Ghaffarinejad, A., Y. Lu, R. Hinchet, D. Galayko, J. Y. Hasani, and P. Basset. "Bennet's charge doubler boosting triboelectric kinetic energy harvesters." Journal of Physics: Conference Series 1052 (July 2018): 012027. http://dx.doi.org/10.1088/1742-6596/1052/1/012027.
Повний текст джерелаGhaffarinejad, A., Y. Lu, R. Hinchet, D. Galayko, J. Y. Hasani, S. W. Kim, and P. Basset. "Bennet's doubler working as a power booster for triboelectric nano‐generators." Electronics Letters 54, no. 6 (March 2018): 378–79. http://dx.doi.org/10.1049/el.2017.3434.
Повний текст джерелаElliott, P. "Abraham Bennet, F.R.S. (1749-1799): a provincial electrician in eighteenth-century england." Notes and Records of the Royal Society of London 53, no. 1 (January 22, 1999): 59–78. http://dx.doi.org/10.1098/rsnr.1999.0063.
Повний текст джерелаOuanes, M. A. Ben, Y. Lu, H. Samaali, P. Basset, and F. Najar. "Design and test of a Bennet's doubler device with mechanical switches for vibrational energy harvesting." Journal of Physics: Conference Series 773 (November 2016): 012038. http://dx.doi.org/10.1088/1742-6596/773/1/012038.
Повний текст джерелаBaker, J. E. "Bennett's double helix." Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics 218, no. 4 (December 2004): 223–30. http://dx.doi.org/10.1243/1464419043541437.
Повний текст джерелаBaker, J. E. "Mounting Bennett's double helix on his skew 12-bar linkage." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 222, no. 8 (August 1, 2008): 1575–82. http://dx.doi.org/10.1243/09544062jmes875.
Повний текст джерелаPark-Finch, Heebon. "Alan Bennett’s Single Spies: Lifting the Veil of Personal and Institutional Secrecy." Journal of Contemporary Drama in English 8, no. 2 (November 3, 2020): 218–35. http://dx.doi.org/10.1515/jcde-2020-0019.
Повний текст джерелаKumar, Mithlesh, G. M. A. Murali Krishna, Banibrata Mukherjee, and Siddhartha Sen. "Design of SOI MEMS-based Bennet’s doubler kinetic energy harvester." Journal of Micro/Nanolithography, MEMS, and MOEMS 19, no. 01 (February 20, 2020): 1. http://dx.doi.org/10.1117/1.jmm.19.1.015001.
Повний текст джерелаTruong, Binh Duc, Cuong Phu Le, and Einar Halvorsen. "Analysis of Electrostatic Energy Harvesters Electrically Configured as Bennet’s Doublers." IEEE Sensors Journal 17, no. 16 (August 15, 2017): 5180–91. http://dx.doi.org/10.1109/jsen.2017.2723571.
Повний текст джерелаScarr, Richard. "Alan Bennett: Political Playwright." New Theatre Quarterly 12, no. 48 (November 1996): 309–22. http://dx.doi.org/10.1017/s0266464x00010502.
Повний текст джерелаДисертації з теми "Bennet's doubler"
Hodzic, Naida. "Study of triboelectric kinetic energy harvester with an asymmetric double variable capacitor implemented in a bennet doubler." Electronic Thesis or Diss., Université Gustave Eiffel, 2022. https://these.univ-paris-est.fr/intranet/2022/UEFL-2022/TH2022UEFL2072.pdf.
Повний текст джерелаEnergy harvesting is the process that involves converting otherwise unused energy present in our environment into usable electrical energy that can be used to power an electronic system. Electrostatic kinetic energy harvesters (eKEHs) utilize vastly present kinetic energy that originates either from an object in motion or vibrations and converts it into electrical energy. The employed principle is based on a polarized variable electrostatic capacitor. With an addition of a triboelectric layer between its plates and utilizing the triboelectrification effect, an eKEH is transformed into a triboelectric nanogenerator (TENG). This type of transducer accumulates charges by contact in the triboelectric layer which thus becomes an electret whose generated semi-permanent electric field allows a variation of the distribution of the electric charges in the electrodes by electrostatic induction.Altering the architecture of a TENG by adding the third electrode, a single-capacitive transducer is converted into a double-capacitive TENG. Doubling the conversion element in a transducer is expected to increase the amount of converted energy. Chosen electronics circuit to condition obtained signal from the generator is Bennet’s charge doubler. An increase without saturation point at the output of this circuit is the unique characteristic of this unstable charge pump. It reflects through an exponential increase of output voltage and a number of charges accumulated in the storage capacitor which increase (in theory) in an infinite way. This means that the surface of the charge-voltage cycle at the terminals of the TENG, and thus the converted energy of the mechanical domain, increases at each iteration of the mechanical cycle of the transducer.The scope of this thesis encompasses the simulation, analytical and experimental research of Bennet’s charge doubler with two asymmetric variable capacitors each containing a triboelectric layer. It is postulated that the performance of the "double TENG" - "double Bennet" system is superior to the classic Bennet’s double. The results of analytical and simulation analysis have shown that the expected behavior of this circuit aligns with hypothesized performance results. The system has been tested experimentally. It is concluded that the results of the constructed system are relevant when compared with the reported performance of the classic "single-capacitive TENG" - "Bennet’s doubler" system.When compared with classic Bennet’s doubler, double Bennet reaches the same voltage levels in less time. That is due to the advantage of double capacitive TENG which increases the number of accumulated charges per mechanical cycle. In analytical analysis, it was found that the two TENG capacitors are codependent and that in operation they affect one another.The output signal of double Bennet is characterized by high voltages ranging from a few hundreds of volts to a few kilovolts (kV). To reduce the rectified output voltage to a level compatible with a commercial application, a Buck DC-DC converter is implemented. This requires a switch. This thesis proposes and studies the use of a high-voltage MEMS micro-plasma switch whose actuation voltages is defined by Paschen’s law. Within the scope of this thesis, the theoretical and experimental studies of this law at the micrometer scale propose optimal actuation voltages for better management of the converted energy
Winder, Brian Geoffrey. "Achieving Complex Motion with Fundamental Components for Lamina Emergent Mechanisms." Diss., CLICK HERE for online access, 2008. http://contentdm.lib.byu.edu/ETD/image/etd2279.pdf.
Повний текст джерелаКниги з теми "Bennet's doubler"
Alan Bennett Double Bill. BBC Audiobooks, 1988.
Знайти повний текст джерелаЧастини книг з теми "Bennet's doubler"
van der Wijk, Volkert. "Inherently Balanced Double Bennett Linkage." In Computational Kinematics, 3–10. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60867-9_1.
Повний текст джерелаТези доповідей конференцій з теми "Bennet's doubler"
de Queiroz, Antonio Carlos M., and Luiz Carlos Macedo De Oliveira Filho. "Simulation of MEMS energy harvesting generators based on Bennet's doubler." In 2015 IEEE 6th Latin-American Symposium on Circuits & Systems (LASCAS). IEEE, 2015. http://dx.doi.org/10.1109/lascas.2015.7250445.
Повний текст джерелаde Queiroz, Antonio Carlos M. "Electrostatic vibrational energy harvesting using a variation of Bennet's doubler." In 2010 53rd IEEE International Midwest Symposium on Circuits and Systems (MWSCAS). IEEE, 2010. http://dx.doi.org/10.1109/mwscas.2010.5548752.
Повний текст джерелаHodzic, Naida, Ahmad Delbani, Armine Karami, Dimitri Galayko, and Philippe Basset. "Bennet’s Doubler With Double Capacitive TENG for Kinetic Energy Harvesting." In 2021 IEEE 20th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS). IEEE, 2021. http://dx.doi.org/10.1109/powermems54003.2021.9658412.
Повний текст джерелаSelig, J. M., and Z. Li. "Double Bennett Mechanisms with Assembly Modes of Different Dimensions." In 2018 4th International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2018). IEEE, 2018. http://dx.doi.org/10.1109/remar.2018.8449894.
Повний текст джерелаLee, Chung-Ching, and Jacques M. Hervé. "New Mechanical Generators of Schoenflies Motion Implementing Bennett Linkages." In ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/esda2012-82224.
Повний текст джерелаZhang, Hemin, Dimitri Galayko, and Philippe Basset. "A Conditioning System for High-Voltage Electrostatic/Triboelectric Energy Harvesters Using Bennet Doubler and Self-Actuated Hysteresis Switch." In 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII). IEEE, 2019. http://dx.doi.org/10.1109/transducers.2019.8808359.
Повний текст джерелаSu, Hai-Jun, Carlos E. Castro, Alexander E. Marras, and Lifeng Zhou. "The Kinematic Principle for Designing DNA Origami Mechanisms: Challenges and Opportunities." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-46833.
Повний текст джерелаMarras, Alex E., Haijun J. Su, and Carlos E. Castro. "Design of DNA Origami Machines and Mechanisms." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87848.
Повний текст джерела