Добірка наукової літератури з теми "AZ80 magnesium alloy"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "AZ80 magnesium alloy".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "AZ80 magnesium alloy"
Pasang, Timotius, V. Satanin, M. Ramezani, M. Waseem, Thomas Neitzert, and O. Kamiya. "Formability of Magnesium Alloys AZ80 and ZE10." Key Engineering Materials 622-623 (September 2014): 284–91. http://dx.doi.org/10.4028/www.scientific.net/kem.622-623.284.
Повний текст джерелаWu, Zhi Lin, Duo Xiang Wu, Ren Shu Yuan, Lei Zhao, and Yan Bao Zhao. "Electrochemical Corrosion Behavior of AZ80 Magnesium Alloy Tube Fabricated by Hydrostatic Extrusion." Applied Mechanics and Materials 624 (August 2014): 77–81. http://dx.doi.org/10.4028/www.scientific.net/amm.624.77.
Повний текст джерелаZhu, Li Ping, Yu Jin Zhu, Chao Lun Wang, Chuang Lu, Xiao Zu Fang, and Xue Jun Cao. "Atmospheric Corrosion of AZ80 Magnesium Alloy." Applied Mechanics and Materials 496-500 (January 2014): 331–35. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.331.
Повний текст джерелаCai, Gang Yi, Xiao Ting Huang, and Peng Hui Deng. "Effects of Thermomechanical Treatment Process on the Microstructure and Properties of AZ80 Magnesium Alloy." Advanced Materials Research 179-180 (January 2011): 354–58. http://dx.doi.org/10.4028/www.scientific.net/amr.179-180.354.
Повний текст джерелаZhang, Zhi Qiang, Qi Chi Le, and Jian Zhong Cui. "Effect of Physical Fields on Solidification Structures of DC Casting AZ80 Magnesium Alloy Billets." Applied Mechanics and Materials 105-107 (September 2011): 1616–19. http://dx.doi.org/10.4028/www.scientific.net/amm.105-107.1616.
Повний текст джерелаXu, Hong Yan, Sen Chang, Xing Zhang, and Zhi Min Zhang. "Study of Aluminum Coating Thermally Sprayed on AZ80 Magnesium Alloy Surface." Materials Science Forum 686 (June 2011): 319–24. http://dx.doi.org/10.4028/www.scientific.net/msf.686.319.
Повний текст джерелаHuang, Xiao Ting, Gang Yi Cai, and Wen Biao Qiu. "Effects of Hot Deformation Process on the Microstructure and Hardness of AZ80 Magnesium Alloy." Advanced Materials Research 476-478 (February 2012): 46–49. http://dx.doi.org/10.4028/www.scientific.net/amr.476-478.46.
Повний текст джерелаDeng, Peng Hui, Tie Cheng Li, and Gang Yi Cai. "Effects of Solution and Ageing Treatment Process on the Microstructure and Properties of AZ80 Magnesium Alloy." Advanced Materials Research 239-242 (May 2011): 238–42. http://dx.doi.org/10.4028/www.scientific.net/amr.239-242.238.
Повний текст джерелаWu, Y. J., Zhi Min Zhang, X. Zhang, Qiang Wang, and B. C. Li. "Effect of Deformation Condition on the Mechanical Behavior of AZ80 Magnesium Alloy." Materials Science Forum 628-629 (August 2009): 529–34. http://dx.doi.org/10.4028/www.scientific.net/msf.628-629.529.
Повний текст джерелаWang, Fang, and Zhong Tang Wang. "Thermal Deformation Property and Constitutive Model of AZ80 Magnesium Alloy." Advanced Materials Research 712-715 (June 2013): 674–77. http://dx.doi.org/10.4028/www.scientific.net/amr.712-715.674.
Повний текст джерелаДисертації з теми "AZ80 magnesium alloy"
Tomlinson, Philip S. "Multiaxial deformation of AZ80 magnesium alloy." Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45362.
Повний текст джерелаAlsubaie, Saad A. "Severely plastically deformed AZ80 magnesium alloy : microstructure and mechanical properties." Thesis, University of Southampton, 2017. https://eprints.soton.ac.uk/415954/.
Повний текст джерелаMackie, David. "Characterisation of casting defects in DC cast magnesium alloys." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/characterisation-of-casting-defects-in-dc-cast-magnesium-alloys(427257fa-04b3-46a3-9128-d21a79f3078a).html.
Повний текст джерелаShahzad, Muhammad. "Influence of extrusion parameters on microstructure development and mechanical properties in wrought magnesium alloys AZ80 and ZK60." Clausthal-Zellerfeld Universitätsbibliothek Clausthal, 2010. http://d-nb.info/1003546358/34.
Повний текст джерелаShahzad, Muhammad [Verfasser]. "Influence of extrusion parameters on microstructure development and mechanical properties in wrought magnesium alloys AZ80 and ZK60 / Muhammad Shahzad." Clausthal-Zellerfeld : Universitätsbibliothek Clausthal, 2010. http://d-nb.info/1003546358/34.
Повний текст джерелаZindal, Anuz. "Development of grain boundary precipitate free zone(pfz) and its effect on mechanical properties of a Mg-8Al-0.5Zn alloy." Thesis, 2018. http://localhost:8080/xmlui/handle/12345678/7581.
Повний текст джерелаCiou, Ren-Jhih, and 邱仁志. "Hot Extrusion of AZ80 Magnesium Alloy Tube and Bar." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/47qhgt.
Повний текст джерела國立臺灣科技大學
機械工程系
95
The study mainly investigates into the formability of AZ80 magnesium alloy tube and bar under hot extrusion. The contents of investigation are divided into two parts. The first part is the extrusion of tube. By using Taguchi’s experimental planning method, the study undergoes the construction and analysis of extrusion experiment. The process parameters considered in the study include the heating temperature of materials,initial extrusion speed, heating temperature of ingot container and lubricant. The study also uses Taguchi orthogonal array to make the experimental plan. After the experiment is done, the extruded finished products are brought to receive a test of mechanical properties. The data of mechanical properties acquired in the test are further analyzed by Taguchi method. The study investigates how the extent of influence of different process parameters on extrusion and fabrication is correlated with the mechanical properties of finished products. The second part uses trial and error method to plan the experiment of AZ80 magnesium alloy bar. The extruded finished products have to receive a test of mechanical properties. Then all the data of mechanical properties acquired in the test are analyzed. These results are compared with the results of extruded tube. Finally, it is hoped that the conclusions made by the study can be provided as a reference for the industry of magnesium alloy processing.
Lai, Wei-Jen, and 賴威任. "Study of Precipitation Hardening and Superplasticity of AZ80 Magnesium Alloy." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/23042499467093135086.
Повний текст джерела國立臺灣大學
材料科學與工程學研究所
96
This study mainly focuses on precipitation hardening behavior and superplasticity of AZ80 magnesium alloy. The precipitation hardening experiment was conducted between 125-300℃. The influence of the precipitate on mechanical properties was measured by microhardness test and tensile test. The precipitate was investigated in detail by XRD, OM, SEM and TEM. The superplastic experiment focuses on three different rolling directions. The temperature ranges from 200-400℃ and the strain rates were 3×10-3、1×10-3 and 3×10-4(s-1). The results were analyzed by OM and SEM to further understand the influence of temperature and strain rate on microstructural evolution. The result of the precipitation hardening experiment indicates that each aging temperature between 150-300℃ shows hardening effect. The highest hardness is occurred at 175℃/256 h and the hardness increment is about 38%. The result shows that the hardness increment is low compared with precipitation-hardenable aluminum alloys. This is influenced by the nature of Mg17Al12 precipitates. The precipitates can be divided into continuous and discontinuous precipitates by their forming mechanism. They can be further divided into lamellar, elliptical, intergranular, Widmanstätten structure and irregular slab by their morphologies. Because the precipitate can not effectively resist dislocation moves, the hardening effect is poor. At different aging temperature the morphology, the size, and the distribution density of Mg17Al12 precipitates are also different. These reasons then lead to different hardness. The result of superplastic experiment shows that the material has best elongation (about 350%) at 300℃/3×10-4s-1. The rapid elongation increase at this temperature has two reasons: one is because 300℃ is close to the recrystallization temperature of the material, dynamic recrystallization then occurs and provides enough grains for grain boundary sliding which produces large deformation; the other reason is because Mg17Al12 precipitates rapidly at 300℃ and most of them are formed on grain boundaries, they can effectively impede grain growth to remain the fine grain structure. These two effects appear at the same time and contribute to high elongation.
Lai, Wei-Jen. "Study of Precipitation Hardening and Superplasticity of AZ80 Magnesium Alloy." 2008. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0001-2207200816174700.
Повний текст джерелаLin, Hung-Ting, and 林泓霆. "A Study of Aging Treatment on AZ80+3%Li Magnesium Alloy." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/06905800175256844039.
Повний текст джерела國立臺灣大學
材料科學與工程學研究所
99
Magnesium alloys are considered as potential candidates for numerous applications, especially in transportation vehicles or lightweight sectors for 3C products owing to their excellent properties, such as low density, high specific strength, high damping capacity and high recycle ability. The AZ series is mainly based on the Mg-Al alloy system and leads most of the magnesium alloys. If the Al addition in these AZ-series magnesium alloys exceeds 6 mass%, the β-Mg17Al12 inter-metallic compounds will precipitate within the matrix and the mechanical strength increases. Furthermore, adding slight Zn into Mg alloys is to enhance their corrosion resistance. These Zn atoms may also have the effect of solid-solution strengthening. However, it is commonly recognized that magnesium possesses poor formability because of its hexagonal close-packed structure. Adding Lithium with extremely low density 0.534 g/cm3 can improve this shortcoming and further reduce weight. In the present study, by 3mass% addition of Lithium on AZ80 Mg alloy, we study mechanical properties of as-extruded magnesium alloy. Furthermore, to more understand this AZ80+3mass% Mg alloy, the effects of heat treatments (T5 and T6) on its precipitation behavior and mechanical properties will be systematically investigated. Experimental results show that adding 3mass% Li to AZ80 alloy can obviously increase the ductility. Meanwhile, as-extruded AZ80+3%Li specimens will produce the Mg17Al12+AlLi precipitates after aging from 110℃ to 230℃. The 110℃ aged specimen has a maximum tensile strength of 356 MPa with corresponding aging time of 16 hours. The 450℃ solution-treated specimens will produce the AlLi precipitates after aging from 110℃ to 230℃. The 110℃ aged specimen has a maximum tensile strength of 373 MPa with corresponding aging time of 32 hours. However, the addition of 3mass% Lithium on AZ80 Magnesium alloy will reduce the corrosion resistance due to the highly activity of Lithium and hydrolitic reaction of AlLi precipitate.
Частини книг з теми "AZ80 magnesium alloy"
Gao, Lei, Alan A. Luo, Shiyi Wang, and Xiaoqin Zeng. "Flow Behavior and Hot Workability of Pre-Extruded AZ80 Magnesium Alloy." In Magnesium Technology 2013, 119–25. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118663004.ch20.
Повний текст джерелаGao, Lei, Alan A. Luo, Shiyi Wang, and Xiaoqin Zeng. "Flow Behavior and Hot Workability of Pre-Extruded AZ80 Magnesium Alloy." In Magnesium Technology 2013, 121–25. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48150-0_20.
Повний текст джерелаRajenthirakumar, D., N. Srinivasan, and R. Sridhar. "Numerical Simulation of Micro Forming of Bio-Absorbable AZ80 Magnesium Alloy." In Lecture Notes on Multidisciplinary Industrial Engineering, 3–11. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9072-3_1.
Повний текст джерелаPang, Xin, Yuna Xue, and Hamid Jahed. "Protective Micro-Arc Oxidation Surface Coating on AZ80 Forged Magnesium Alloy." In The Minerals, Metals & Materials Series, 65–71. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-22645-8_16.
Повний текст джерелаXie, Q. G., Ping Yang, and F. E. Cui. "Influence of Deformation on Precipitation and Recrystallization in an AZ80 Magnesium Alloy." In Materials Science Forum, 293–96. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-432-4.293.
Повний текст джерелаKulkarni, Rahul R., Nityanand Prabhu, Peter D. Hodgson, and Bhagwati P. Kashyap. "Phase dissolution of γ-Mg17Al12 during homogenization of as-cast AZ80 Magnesium alloy and its effect on room temperature mechanical properties." In Magnesium Technology 2012, 543–48. Cham: Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48203-3_96.
Повний текст джерелаKulkarni, Rahul R., Nityanand Prabhu, Peter D. Hodgson, and Bhagwati P. Kashyap. "Phase Dissolution of γ-Mg17Al12 during Homogenization of As-Cast AZ80 Magnesium Alloy and Its Effect on Room Temperature Mechanical Properties." In Magnesium Technology 2012, 543–48. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118359228.ch98.
Повний текст джерелаWang, Qiang, Zhi Min Zhang, B. C. Li, and Bao Hong Zhang. "Effects of Tool Radius on Formability during Forging of AZ80 Magnesium Alloy Wheel." In THERMEC 2006, 1696–700. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.1696.
Повний текст джерелаPrakash, Paresh, Amir Hadadzadeh, Sugrib Kumar Shaha, Mark A. Whitney, Mary A. Wells, Hamid Jahed, and Bruce W. Williams. "Microstructure and Texture Evolution During Hot Compression of Cast and Extruded AZ80 Magnesium Alloy." In The Minerals, Metals & Materials Series, 89–94. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05789-3_15.
Повний текст джерелаHarada, Yohei, Yutaro Sada, and Shinji Kumai. "Joining of 2024 Aluminum Alloy Stud to AZ80 Magnesium Alloy Extruded Plate by Advanced High-Speed Solid-State Method." In ICAA13: 13th International Conference on Aluminum Alloys, 771–76. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495292.ch113.
Повний текст джерелаТези доповідей конференцій з теми "AZ80 magnesium alloy"
Tang, Wei. "Deformation Behavior of AZ80 Wrought Magnesium Alloy at Cryogenic Temperatures." In ADVANCES IN CRYOGENIC ENGINEERING. AIP, 2006. http://dx.doi.org/10.1063/1.2192349.
Повний текст джерелаBao-hong, Zhang, and Zhang Zhi-min. "Study on microstructure and mechanical properties of extruded as-cast AZ80 magnesium alloy." In 2011 International Conference on Consumer Electronics, Communications and Networks (CECNet). IEEE, 2011. http://dx.doi.org/10.1109/cecnet.2011.5768391.
Повний текст джерелаGontarz, A., Z. Pater, K. Drozdowski, A. Tofil, and J. Tomczak. "FEM ANALYSIS OF THE FORGING PROCESS OF HUB PART FROM AZ80 MAGNESIUM ALLOY." In 10th World Congress on Computational Mechanics. São Paulo: Editora Edgard Blücher, 2014. http://dx.doi.org/10.5151/meceng-wccm2012-16805.
Повний текст джерелаBaohong Zhang and Zhimin Zhang. "Influence of extrusion on microstructure and mechanical properties of as-cast AZ80 magnesium alloy." In 2011 International Conference on Remote Sensing, Environment and Transportation Engineering (RSETE). IEEE, 2011. http://dx.doi.org/10.1109/rsete.2011.5965736.
Повний текст джерелаLi, Quan-an, Xiaoya Chen, Qing Zhang, Jun Chen, and Yao Zhou. "Microstructure and Mechanical Properties of AZ81 Magnesium Alloy." In 2015 International Conference on Materials, Environmental and Biological Engineering. Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/mebe-15.2015.219.
Повний текст джерелаYANG, YONGSHUN, and XI YANG. "SUPERPLASTIC FORMING OF AZ80A MAGNESIUM ALLOY AUTOMOBILE WHEEL." In Proceedings of the 10th Asia-Pacific Conference. WORLD SCIENTIFIC, 2011. http://dx.doi.org/10.1142/9789814324052_0060.
Повний текст джерелаMing Yang, Yongshun Yang, and Junqing Guo. "Research on the thermal simulation experiment of AZ80A magnesium alloy." In 2011 Second International Conference on Mechanic Automation and Control Engineering (MACE). IEEE, 2011. http://dx.doi.org/10.1109/mace.2011.5987253.
Повний текст джерелаVeverková, Eliška, Michal KNAPEK, and Peter MINÁRIK. "Effect of ALUMINUM CONTENT and precipitation on the corrosion behavior and acoustic emission RESPONSE OF AZ31 AND AZ80 MAGNESIUM ALLOYS." In METAL 2019. TANGER Ltd., 2019. http://dx.doi.org/10.37904/metal.2019.940.
Повний текст джерела